package torrent

import (
	"net"
	"net/http"
	"net/url"
	"time"

	"github.com/anacrolix/dht/v2"
	"github.com/anacrolix/dht/v2/krpc"
	"github.com/anacrolix/log"
	"github.com/anacrolix/missinggo"
	"github.com/anacrolix/missinggo/expect"
	"github.com/anacrolix/missinggo/v2/conntrack"
	"golang.org/x/time/rate"

	"github.com/anacrolix/torrent/iplist"
	"github.com/anacrolix/torrent/mse"
	"github.com/anacrolix/torrent/storage"
)

// Probably not safe to modify this after it's given to a Client.
type ClientConfig struct {
	// Store torrent file data in this directory unless .DefaultStorage is
	// specified.
	DataDir string `long:"data-dir" description:"directory to store downloaded torrent data"`
	// The address to listen for new uTP and TCP BitTorrent protocol connections. DHT shares a UDP
	// socket with uTP unless configured otherwise.
	ListenHost              func(network string) string
	ListenPort              int
	NoDefaultPortForwarding bool
	UpnpID                  string
	// Don't announce to trackers. This only leaves DHT to discover peers.
	DisableTrackers bool `long:"disable-trackers"`
	DisablePEX      bool `long:"disable-pex"`

	// Don't create a DHT.
	NoDHT            bool `long:"disable-dht"`
	DhtStartingNodes func(network string) dht.StartingNodesGetter
	// Called for each anacrolix/dht Server created for the Client.
	ConfigureAnacrolixDhtServer func(*dht.ServerConfig)

	// Never send chunks to peers.
	NoUpload bool `long:"no-upload"`
	// Disable uploading even when it isn't fair.
	DisableAggressiveUpload bool `long:"disable-aggressive-upload"`
	// Upload even after there's nothing in it for us. By default uploading is
	// not altruistic, we'll only upload to encourage the peer to reciprocate.
	Seed bool `long:"seed"`
	// Only applies to chunks uploaded to peers, to maintain responsiveness
	// communicating local Client state to peers. Each limiter token
	// represents one byte. The Limiter's burst must be large enough to fit a
	// whole chunk, which is usually 16 KiB (see TorrentSpec.ChunkSize).
	UploadRateLimiter *rate.Limiter
	// Rate limits all reads from connections to peers. Each limiter token
	// represents one byte. The Limiter's burst must be bigger than the
	// largest Read performed on a the underlying rate-limiting io.Reader
	// minus one. This is likely to be the larger of the main read loop buffer
	// (~4096), and the requested chunk size (~16KiB, see
	// TorrentSpec.ChunkSize).
	DownloadRateLimiter *rate.Limiter

	// User-provided Client peer ID. If not present, one is generated automatically.
	PeerID string
	// For the bittorrent protocol.
	DisableUTP bool
	// For the bittorrent protocol.
	DisableTCP bool `long:"disable-tcp"`
	// Called to instantiate storage for each added torrent. Builtin backends
	// are in the storage package. If not set, the "file" implementation is
	// used (and Closed when the Client is Closed).
	DefaultStorage storage.ClientImpl

	HeaderObfuscationPolicy HeaderObfuscationPolicy
	// The crypto methods to offer when initiating connections with header obfuscation.
	CryptoProvides mse.CryptoMethod
	// Chooses the crypto method to use when receiving connections with header obfuscation.
	CryptoSelector mse.CryptoSelector

	IPBlocklist      iplist.Ranger
	DisableIPv6      bool `long:"disable-ipv6"`
	DisableIPv4      bool
	DisableIPv4Peers bool
	// Perform logging and any other behaviour that will help debug.
	Debug  bool `help:"enable debugging"`
	Logger log.Logger

	// Defines proxy for HTTP requests, such as for trackers. It's commonly set from the result of
	// "net/http".ProxyURL(HTTPProxy).
	HTTPProxy func(*http.Request) (*url.URL, error)
	// HTTPUserAgent changes default UserAgent for HTTP requests
	HTTPUserAgent string
	// Updated occasionally to when there's been some changes to client
	// behaviour in case other clients are assuming anything of us. See also
	// `bep20`.
	ExtendedHandshakeClientVersion string
	// Peer ID client identifier prefix. We'll update this occasionally to
	// reflect changes to client behaviour that other clients may depend on.
	// Also see `extendedHandshakeClientVersion`.
	Bep20 string

	// Peer dial timeout to use when there are limited peers.
	NominalDialTimeout time.Duration
	// Minimum peer dial timeout to use (even if we have lots of peers).
	MinDialTimeout             time.Duration
	EstablishedConnsPerTorrent int
	HalfOpenConnsPerTorrent    int
	TotalHalfOpenConns         int
	// Maximum number of peer addresses in reserve.
	TorrentPeersHighWater int
	// Minumum number of peers before effort is made to obtain more peers.
	TorrentPeersLowWater int

	// Limit how long handshake can take. This is to reduce the lingering
	// impact of a few bad apples. 4s loses 1% of successful handshakes that
	// are obtained with 60s timeout, and 5% of unsuccessful handshakes.
	HandshakesTimeout time.Duration

	// The IP addresses as our peers should see them. May differ from the
	// local interfaces due to NAT or other network configurations.
	PublicIp4 net.IP
	PublicIp6 net.IP

	// Accept rate limiting affects excessive connection attempts from IPs that fail during
	// handshakes or request torrents that we don't have.
	DisableAcceptRateLimiting bool
	// Don't add connections that have the same peer ID as an existing
	// connection for a given Torrent.
	DropDuplicatePeerIds bool
	// Drop peers that are complete if we are also complete and have no use for the peer. This is a
	// bit of a special case, since a peer could also be useless if they're just not interested, or
	// we don't intend to obtain all of a torrent's data.
	DropMutuallyCompletePeers bool

	ConnTracker *conntrack.Instance

	// OnQuery hook func
	DHTOnQuery func(query *krpc.Msg, source net.Addr) (propagate bool)

	DefaultRequestStrategy requestStrategyMaker

	Extensions PeerExtensionBits

	DisableWebtorrent bool
	DisableWebseeds   bool

	Callbacks Callbacks
}

func (cfg *ClientConfig) SetListenAddr(addr string) *ClientConfig {
	host, port, err := missinggo.ParseHostPort(addr)
	expect.Nil(err)
	cfg.ListenHost = func(string) string { return host }
	cfg.ListenPort = port
	return cfg
}

func NewDefaultClientConfig() *ClientConfig {
	cc := &ClientConfig{
		HTTPUserAgent:                  "Go-Torrent/1.0",
		ExtendedHandshakeClientVersion: "go.torrent dev 20181121",
		Bep20:                          "-GT0002-",
		UpnpID:                         "anacrolix/torrent",
		NominalDialTimeout:             20 * time.Second,
		MinDialTimeout:                 3 * time.Second,
		EstablishedConnsPerTorrent:     50,
		HalfOpenConnsPerTorrent:        25,
		TotalHalfOpenConns:             100,
		TorrentPeersHighWater:          500,
		TorrentPeersLowWater:           50,
		HandshakesTimeout:              4 * time.Second,
		DhtStartingNodes: func(network string) dht.StartingNodesGetter {
			return func() ([]dht.Addr, error) { return dht.GlobalBootstrapAddrs(network) }
		},
		ListenHost:                func(string) string { return "" },
		UploadRateLimiter:         unlimited,
		DownloadRateLimiter:       unlimited,
		ConnTracker:               conntrack.NewInstance(),
		DisableAcceptRateLimiting: true,
		DropMutuallyCompletePeers: true,
		HeaderObfuscationPolicy: HeaderObfuscationPolicy{
			Preferred:        true,
			RequirePreferred: false,
		},
		CryptoSelector: mse.DefaultCryptoSelector,
		CryptoProvides: mse.AllSupportedCrypto,
		ListenPort:     42069,

		DefaultRequestStrategy: RequestStrategyDuplicateRequestTimeout(5 * time.Second),

		Extensions: defaultPeerExtensionBytes(),
	}
	//cc.ConnTracker.SetNoMaxEntries()
	//cc.ConnTracker.Timeout = func(conntrack.Entry) time.Duration { return 0 }
	return cc
}

type HeaderObfuscationPolicy struct {
	RequirePreferred bool // Whether the value of Preferred is a strict requirement.
	Preferred        bool // Whether header obfuscation is preferred.
}