"\t\t(all)" = "\t\t(all)"; "\t\t(none)" = "\t\t(none)"; "\t%d entries" = "\t%d entries"; "\t%s" = "\t%s"; "\tAfter fault: continue" = "\tAfter fault: continue"; "\tAlerts: %s" = "\tAlerts: %s"; "\tBanner required" = "\tBanner required"; "\tCharset sets:" = "\tCharset sets:"; "\tConnection: direct" = "\tConnection: direct"; "\tConnection: remote" = "\tConnection: remote"; "\tContent types: any" = "\tContent types: any"; "\tDefault page size:" = "\tDefault page size:"; "\tDefault pitch:" = "\tDefault pitch:"; "\tDefault port settings:" = "\tDefault port settings:"; "\tDescription: %s" = "\tDescription: %s"; "\tForm mounted:" = "\tForm mounted:"; "\tForms allowed:" = "\tForms allowed:"; "\tInterface: %s.ppd" = "\tInterface: %s.ppd"; "\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd"; "\tLocation: %s" = "\tLocation: %s"; "\tOn fault: no alert" = "\tOn fault: no alert"; "\tPrinter types: unknown" = "\tPrinter types: unknown"; "\tStatus: %s" = "\tStatus: %s"; "\tUsers allowed:" = "\tUsers allowed:"; "\tUsers denied:" = "\tUsers denied:"; "\tdaemon present" = "\tdaemon present"; "\tno entries" = "\tno entries"; "\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1"; "\tprinting is disabled" = "\tprinting is disabled"; "\tprinting is enabled" = "\tprinting is enabled"; "\tqueued for %s" = "\tqueued for %s"; "\tqueuing is disabled" = "\tqueuing is disabled"; "\tqueuing is enabled" = "\tqueuing is enabled"; "\treason unknown" = "\treason unknown"; "\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS"; " REF: Page 15, section 3.1." = " REF: Page 15, section 3.1."; " REF: Page 15, section 3.2." = " REF: Page 15, section 3.2."; " REF: Page 19, section 3.3." = " REF: Page 19, section 3.3."; " REF: Page 20, section 3.4." = " REF: Page 20, section 3.4."; " REF: Page 27, section 3.5." = " REF: Page 27, section 3.5."; " REF: Page 42, section 5.2." = " REF: Page 42, section 5.2."; " REF: Pages 16-17, section 3.2." = " REF: Pages 16-17, section 3.2."; " REF: Pages 42-45, section 5.2." = " REF: Pages 42-45, section 5.2."; " REF: Pages 45-46, section 5.2." = " REF: Pages 45-46, section 5.2."; " REF: Pages 48-49, section 5.2." = " REF: Pages 48-49, section 5.2."; " REF: Pages 52-54, section 5.2." = " REF: Pages 52-54, section 5.2."; " %-39.39s %.0f bytes" = " %-39.39s %.0f bytes"; " PASS Default%s" = " PASS Default%s"; " PASS DefaultImageableArea" = " PASS DefaultImageableArea"; " PASS DefaultPaperDimension" = " PASS DefaultPaperDimension"; " PASS FileVersion" = " PASS FileVersion"; " PASS FormatVersion" = " PASS FormatVersion"; " PASS LanguageEncoding" = " PASS LanguageEncoding"; " PASS LanguageVersion" = " PASS LanguageVersion"; " PASS Manufacturer" = " PASS Manufacturer"; " PASS ModelName" = " PASS ModelName"; " PASS NickName" = " PASS NickName"; " PASS PCFileName" = " PASS PCFileName"; " PASS PSVersion" = " PASS PSVersion"; " PASS PageRegion" = " PASS PageRegion"; " PASS PageSize" = " PASS PageSize"; " PASS Product" = " PASS Product"; " PASS ShortNickName" = " PASS ShortNickName"; " WARN %s has no corresponding options." = " WARN %s has no corresponding options."; " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2." = " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2."; " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17" = " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17"; " WARN File contains a mix of CR, LF, and CR LF line endings." = " WARN File contains a mix of CR, LF, and CR LF line endings."; " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3." = " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3."; " WARN Line %d only contains whitespace." = " WARN Line %d only contains whitespace."; " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3." = " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3."; " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF." = " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF."; " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2." = " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2."; " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3."; " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3."; " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7."; " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7."; " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3."; " %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s “%s %s” conflicts with “%s %s”\n (constraint=“%s %s %s %s”)."; " %s %s %s does not exist." = " %s %s %s does not exist."; " %s %s file \"%s\" has the wrong capitalization." = " %s %s file “%s” has the wrong capitalization."; " %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17"; " %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 “%s” translation string for option %s, choice %s."; " %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 “%s” translation string for option %s."; " %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value “%s”."; " %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value “%s”."; " %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s."; " %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value “%s”."; " %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: “%s”"; " %s Bad language \"%s\"." = " %s Bad language “%s”."; " %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file “%s”."; " %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s."; " %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID."; " %s Default choices conflicting." = " %s Default choices conflicting."; " %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s"; " %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing “%s” translation string for option %s, choice %s."; " %s Missing \"%s\" translation string for option %s." = " %s Missing “%s” translation string for option %s."; " %s Missing %s file \"%s\"." = " %s Missing %s file “%s”."; " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14."; " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14."; " %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints “*%s %s *%s %s”."; " %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: “%s”"; " %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s"; " %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints “*%s %s *%s %s”."; " %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: “%s”"; " %s No base translation \"%s\" is included in file." = " %s No base translation “%s” is included in file."; " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17"; " %s Size \"%s\" defined for %s but not for %s." = " %s Size “%s” defined for %s but not for %s."; " %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size “%s” has unexpected dimensions (%gx%g)."; " %s Size \"%s\" should be \"%s\"." = " %s Size “%s” should be “%s”."; " %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size “%s” should be the Adobe standard name “%s”."; " %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s."; " %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop."; " %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options."; " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5" = " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5"; " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5."; " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15."; " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15."; " **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion “%s”\n REF: Page 56, section 5.3."; " **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion “%s”\n REF: Page 56, section 5.3."; " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4."; " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1."; " **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English."; " **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be “%s”)\n REF: Page 211, table D.1."; " **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - “%c” not allowed in string.\n REF: Pages 59-60, section 5.3."; " **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not “(string) int”.\n REF: Pages 62-64, section 5.3."; " **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not “(string)”.\n REF: Page 62, section 5.3."; " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3."; " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9"; " **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s"; " **FAIL** Default translation string for option %s choice %s contains 8-bit characters." = " **FAIL** Default translation string for option %s choice %s contains 8-bit characters."; " **FAIL** Default translation string for option %s contains 8-bit characters." = " **FAIL** Default translation string for option %s contains 8-bit characters."; " **FAIL** Group names %s and %s differ only by case." = " **FAIL** Group names %s and %s differ only by case."; " **FAIL** Multiple occurrences of option %s choice name %s." = " **FAIL** Multiple occurrences of option %s choice name %s."; " **FAIL** Option %s choice names %s and %s differ only by case." = " **FAIL** Option %s choice names %s and %s differ only by case."; " **FAIL** Option names %s and %s differ only by case." = " **FAIL** Option names %s and %s differ only by case."; " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5." = " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5."; " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15."; " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15."; " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3."; " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3."; " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15."; " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3." = " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3."; " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3." = " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3."; " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3." = " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3."; " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3." = " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3."; " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3." = " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3."; " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3." = " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3."; " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3." = " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3."; " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14." = " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14."; " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14."; " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14."; " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15."; " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3." = " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3."; " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3."; " **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d."; " %d ERRORS FOUND" = " %d ERRORS FOUND"; " NO ERRORS FOUND" = " NO ERRORS FOUND"; " --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9)."; " --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows)."; " --lf End lines with LF (UNIX/Linux/macOS)." = " --lf End lines with LF (UNIX/Linux/macOS)."; " --list-filters List filters that will be used." = " --list-filters List filters that will be used."; " -D Remove the input file when finished." = " -D Remove the input file when finished."; " -D name=value Set named variable to value." = " -D name=value Set named variable to value."; " -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path."; " -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file."; " -U username Specify username." = " -U username Specify username."; " -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog."; " -c cups-files.conf Set cups-files.conf file to use." = " -c cups-files.conf Set cups-files.conf file to use."; " -d output-dir Specify the output directory." = " -d output-dir Specify the output directory."; " -d printer Use the named printer." = " -d printer Use the named printer."; " -e Use every filter from the PPD file." = " -e Use every filter from the PPD file."; " -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed)."; " -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1)."; " -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,…] Specify the output language(s) (locale)."; " -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename."; " -m mime/type Set output MIME type (otherwise application/pdf)." = " -m mime/type Set output MIME type (otherwise application/pdf)."; " -n copies Set number of copies." = " -n copies Set number of copies."; " -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv)."; " -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout)."; " -o name=value Set option(s)." = " -o name=value Set option(s)."; " -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file."; " -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them."; " -t title Set title." = " -t title Set title."; " -u Remove the PPD file when finished." = " -u Remove the PPD file when finished."; " -v Be verbose." = " -v Be verbose."; " -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip."; " FAIL" = " FAIL"; " PASS" = " PASS"; "! expression Unary NOT of expression" = "! expression Unary NOT of expression"; "\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6)."; "\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6)."; "\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4)."; "\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4)."; "\"%s\": Bad boolean value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolean value %d (RFC 8011 section 5.1.21)."; "\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8)."; "\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8)."; "\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15)."; "\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5)."; "\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4)."; "\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4)."; "\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10)."; "\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10)."; "\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3)."; "\"%s\": Bad name value \"%s\" - bad control character (PWG 5100.14 section 8.1)." = "“%s”: Bad name value “%s” - bad control character (PWG 5100.14 section 8.1)."; "\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3)."; "\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9)."; "\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9)."; "\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20)."; "\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)."; "\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)."; "\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)."; "\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)."; "\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2)."; "\"%s\": Bad text value \"%s\" - bad control character (PWG 5100.14 section 8.3)." = "“%s”: Bad text value “%s” - bad control character (PWG 5100.14 section 8.3)."; "\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2)."; "\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7)."; "\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7)."; "\"requesting-user-name\" attribute in wrong group." = "“requesting-user-name” attribute in wrong group."; "\"requesting-user-name\" attribute with wrong syntax." = "“requesting-user-name” attribute with wrong syntax."; "%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes"; "%d x %d mm" = "%d x %d mm"; "%g x %g \"" = "%g x %g ″"; "%s (%s)" = "%s (%s)"; "%s (%s, %s)" = "%s (%s, %s)"; "%s (Borderless)" = "%s (Borderless)"; "%s (Borderless, %s)" = "%s (Borderless, %s)"; "%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)"; "%s accepting requests since %s" = "%s accepting requests since %s"; "%s cannot be changed." = "%s cannot be changed."; "%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc."; "%s is not ready" = "%s is not ready"; "%s is ready" = "%s is ready"; "%s is ready and printing" = "%s is ready and printing"; "%s job-id user title copies options [file]" = "%s job-id user title copies options [file]"; "%s not accepting requests since %s -" = "%s not accepting requests since %s -"; "%s not supported." = "%s not supported."; "%s/%s accepting requests since %s" = "%s/%s accepting requests since %s"; "%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -"; "%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]"; // TRANSLATORS: Message is "subject: error" "%s: %s" = "%s: %s"; "%s: %s failed: %s" = "%s: %s failed: %s"; "%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”."; "%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”."; "%s: Don't know what to do." = "%s: Don’t know what to do."; "%s: Error - %s" = "%s: Error - %s"; "%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”."; "%s: Error - The printer or class does not exist." = "%s: Error - The printer or class does not exist."; "%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name."; "%s: Error - bad job ID." = "%s: Error - bad job ID."; "%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously."; "%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided."; "%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more."; "%s: Error - expected \"username\" after \"-U\" option." = "%s: Error - expected “username” after “-U” option."; "%s: Error - expected PPD file after \"-%c\" option." = "%s: Error - expected PPD file after “-%c” option."; "%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option."; "%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option."; "%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option."; "%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option."; "%s: Error - expected destination MIME type after \"-m\" option." = "%s: Error - expected destination MIME type after “-m” option."; "%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option."; "%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option."; "%s: Error - expected filename after \"-c\" option." = "%s: Error - expected filename after “-c” option."; "%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option."; "%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option."; "%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option."; "%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option."; "%s: Error - expected input file after \"-f\" option." = "%s: Error - expected input file after “-f” option."; "%s: Error - expected job-id after \"-j\" option." = "%s: Error - expected job-id after “-j” option."; "%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option."; "%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option."; "%s: Error - expected name=value after \"-a\" option." = "%s: Error - expected name=value after “-a” option."; "%s: Error - expected name=value after \"-o\" option." = "%s: Error - expected name=value after “-o” option."; "%s: Error - expected number of copies after \"-n\" option." = "%s: Error - expected number of copies after “-n” option."; "%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option."; "%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option."; "%s: Error - expected printer name after \"-d\" option." = "%s: Error - expected printer name after “-d” option."; "%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option."; "%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option."; "%s: Error - expected source MIME type after \"-i\" option." = "%s: Error - expected source MIME type after “-i” option."; "%s: Error - expected title after \"-%c\" option." = "%s: Error - expected title after “-%c” option."; "%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option."; "%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option."; "%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option."; "%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option."; "%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, or “all” after “-W” option."; "%s: Error - no default destination available." = "%s: Error - no default destination available."; "%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100."; "%s: Error - scheduler not responding." = "%s: Error - scheduler not responding."; "%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”."; "%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s"; "%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s."; "%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”."; "%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”."; "%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”."; "%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”."; "%s: Error - unknown option \"-%c\"." = "%s: Error - unknown option “-%c”."; "%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option."; "%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”."; "%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”."; "%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”."; "%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”."; "%s: Missing version for \"-V\"." = "%s: Missing version for “-V”."; "%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”."; "%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s."; "%s: Operation failed: %s" = "%s: Operation failed: %s"; "%s: Sorry, no encryption support." = "%s: Sorry, no encryption support."; "%s: Unable to connect to \"%s:%d\": %s" = "%s: Unable to connect to “%s:%d”: %s"; "%s: Unable to connect to server." = "%s: Unable to connect to server."; "%s: Unable to contact server." = "%s: Unable to contact server."; "%s: Unable to create PPD file: %s" = "%s: Unable to create PPD file: %s"; "%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”."; "%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s"; "%s: Unable to open %s: %s" = "%s: Unable to open %s: %s"; "%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d."; "%s: Unable to query printer: %s" = "%s: Unable to query printer: %s"; "%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”."; "%s: Unable to resolve \"%s\"." = "%s: Unable to resolve “%s”."; "%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”."; "%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”."; "%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s."; "%s: Unknown option \"%c\"." = "%s: Unknown option “%c”."; "%s: Unknown option \"%s\"." = "%s: Unknown option “%s”."; "%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”."; "%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s."; "%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct."; "%s: Warning - character set option ignored." = "%s: Warning - character set option ignored."; "%s: Warning - content type option ignored." = "%s: Warning - content type option ignored."; "%s: Warning - form option ignored." = "%s: Warning - form option ignored."; "%s: Warning - mode option ignored." = "%s: Warning - mode option ignored."; "( expressions ) Group expressions" = "( expressions ) Group expressions"; "- Cancel all jobs" = "- Cancel all jobs"; "-# num-copies Specify the number of copies to print" = "-# num-copies Specify the number of copies to print"; "--[no-]debug-logging Turn debug logging on/off" = "--[no-]debug-logging Turn debug logging on/off"; "--[no-]remote-admin Turn remote administration on/off" = "--[no-]remote-admin Turn remote administration on/off"; "--[no-]remote-any Allow/prevent access from the Internet" = "--[no-]remote-any Allow/prevent access from the Internet"; "--[no-]share-printers Turn printer sharing on/off" = "--[no-]share-printers Turn printer sharing on/off"; "--[no-]user-cancel-any Allow/prevent users to cancel any job" = "--[no-]user-cancel-any Allow/prevent users to cancel any job"; "--device-id device-id Show models matching the given IEEE 1284 device ID" = "--device-id device-id Show models matching the given IEEE 1284 device ID"; "--domain regex Match domain to regular expression" = "--domain regex Match domain to regular expression"; "--exclude-schemes scheme-list\n Exclude the specified URI schemes" = "--exclude-schemes scheme-list\n Exclude the specified URI schemes"; "--exec utility [argument ...] ;\n Execute program if true" = "--exec utility [argument …] ;\n Execute program if true"; "--false Always false" = "--false Always false"; "--help Show program help" = "--help Show program help"; "--hold Hold new jobs" = "--hold Hold new jobs"; "--host regex Match hostname to regular expression" = "--host regex Match hostname to regular expression"; "--include-schemes scheme-list\n Include only the specified URI schemes" = "--include-schemes scheme-list\n Include only the specified URI schemes"; "--ippserver filename Produce ippserver attribute file" = "--ippserver filename Produce ippserver attribute file"; "--language locale Show models matching the given locale" = "--language locale Show models matching the given locale"; "--literal-name name Match service name to literal name value" = "--literal-name name Match service name to literal name value"; "--local True if service is local" = "--local True if service is local"; "--ls List attributes" = "--ls List attributes"; "--make-and-model name Show models matching the given make and model name" = "--make-and-model name Show models matching the given make and model name"; "--name regex Match service name to regular expression" = "--name regex Match service name to regular expression"; "--no-web-forms Disable web forms for media and supplies" = "--no-web-forms Disable web forms for media and supplies"; "--not expression Unary NOT of expression" = "--not expression Unary NOT of expression"; "--pam-service service Use the named PAM service" = "--pam-service service Use the named PAM service"; "--path regex Match resource path to regular expression" = "--path regex Match resource path to regular expression"; "--port number[-number] Match port to number or range" = "--port number[-number] Match port to number or range"; "--print Print URI if true" = "--print Print URI if true"; "--print-name Print service name if true" = "--print-name Print service name if true"; "--product name Show models matching the given PostScript product" = "--product name Show models matching the given PostScript product"; "--quiet Quietly report match via exit code" = "--quiet Quietly report match via exit code"; "--release Release previously held jobs" = "--release Release previously held jobs"; "--remote True if service is remote" = "--remote True if service is remote"; "--stop-after-include-error\n Stop tests after a failed INCLUDE" = "--stop-after-include-error\n Stop tests after a failed INCLUDE"; "--timeout seconds Specify the maximum number of seconds to discover devices" = "--timeout seconds Specify the maximum number of seconds to discover devices"; "--true Always true" = "--true Always true"; "--txt key True if the TXT record contains the key" = "--txt key True if the TXT record contains the key"; "--txt-* regex Match TXT record key to regular expression" = "--txt-* regex Match TXT record key to regular expression"; "--uri regex Match URI to regular expression" = "--uri regex Match URI to regular expression"; "--version Show program version" = "--version Show program version"; "--version Show version" = "--version Show version"; "-1" = "-1"; "-10" = "-10"; "-100" = "-100"; "-105" = "-105"; "-11" = "-11"; "-110" = "-110"; "-115" = "-115"; "-12" = "-12"; "-120" = "-120"; "-13" = "-13"; "-14" = "-14"; "-15" = "-15"; "-2" = "-2"; "-2 Set 2-sided printing support (default=1-sided)" = "-2 Set 2-sided printing support (default=1-sided)"; "-20" = "-20"; "-25" = "-25"; "-3" = "-3"; "-30" = "-30"; "-35" = "-35"; "-4" = "-4"; "-4 Connect using IPv4" = "-4 Connect using IPv4"; "-40" = "-40"; "-45" = "-45"; "-5" = "-5"; "-50" = "-50"; "-55" = "-55"; "-6" = "-6"; "-6 Connect using IPv6" = "-6 Connect using IPv6"; "-60" = "-60"; "-65" = "-65"; "-7" = "-7"; "-70" = "-70"; "-75" = "-75"; "-8" = "-8"; "-80" = "-80"; "-85" = "-85"; "-9" = "-9"; "-90" = "-90"; "-95" = "-95"; "-A Enable authentication" = "-A Enable authentication"; "-C Send requests using chunking (default)" = "-C Send requests using chunking (default)"; "-D description Specify the textual description of the printer" = "-D description Specify the textual description of the printer"; "-D device-uri Set the device URI for the printer" = "-D device-uri Set the device URI for the printer"; "-E Enable and accept jobs on the printer (after -p)" = "-E Enable and accept jobs on the printer (after -p)"; "-E Encrypt the connection to the server" = "-E Encrypt the connection to the server"; "-E Test with encryption using HTTP Upgrade to TLS" = "-E Test with encryption using HTTP Upgrade to TLS"; "-F Run in the foreground but detach from console." = "-F Run in the foreground but detach from console."; "-F output-type/subtype Set the output format for the printer" = "-F output-type/subtype Set the output format for the printer"; "-H Show the default server and port" = "-H Show the default server and port"; "-H HH:MM Hold the job until the specified UTC time" = "-H HH:MM Hold the job until the specified UTC time"; "-H hold Hold the job until released/resumed" = "-H hold Hold the job until released/resumed"; "-H immediate Print the job as soon as possible" = "-H immediate Print the job as soon as possible"; "-H restart Reprint the job" = "-H restart Reprint the job"; "-H resume Resume a held job" = "-H resume Resume a held job"; "-H server[:port] Connect to the named server and port" = "-H server[:port] Connect to the named server and port"; "-I Ignore errors" = "-I Ignore errors"; "-I {filename,filters,none,profiles}\n Ignore specific warnings" = "-I {filename,filters,none,profiles}\n Ignore specific warnings"; "-K keypath Set location of server X.509 certificates and keys." = "-K keypath Set location of server X.509 certificates and keys."; "-L Send requests using content-length" = "-L Send requests using content-length"; "-L location Specify the textual location of the printer" = "-L location Specify the textual location of the printer"; "-M manufacturer Set manufacturer name (default=Test)" = "-M manufacturer Set manufacturer name (default=Test)"; "-N name Match service name to literal name value" = "-N name Match service name to literal name value"; "-P destination Show status for the specified destination" = "-P destination Show status for the specified destination"; "-P destination Specify the destination" = "-P destination Specify the destination"; "-P filename.plist Produce XML plist to a file and test report to standard output" = "-P filename.plist Produce XML plist to a file and test report to standard output"; "-P filename.ppd Load printer attributes from PPD file" = "-P filename.ppd Load printer attributes from PPD file"; "-P number[-number] Match port to number or range" = "-P number[-number] Match port to number or range"; "-P page-list Specify a list of pages to print" = "-P page-list Specify a list of pages to print"; "-R Show the ranking of jobs" = "-R Show the ranking of jobs"; "-R name-default Remove the default value for the named option" = "-R name-default Remove the default value for the named option"; "-R root-directory Set alternate root" = "-R root-directory Set alternate root"; "-S Test with encryption using HTTPS" = "-S Test with encryption using HTTPS"; "-S filename.strings Set strings file" = "-S filename.strings Set strings file"; "-T seconds Set the browse timeout in seconds" = "-T seconds Set the browse timeout in seconds"; "-T seconds Set the receive/send timeout in seconds" = "-T seconds Set the receive/send timeout in seconds"; "-T title Specify the job title" = "-T title Specify the job title"; "-U username Specify the username to use for authentication" = "-U username Specify the username to use for authentication"; "-U username Specify username to use for authentication" = "-U username Specify username to use for authentication"; "-V version Set default IPP version" = "-V version Set default IPP version"; "-W completed Show completed jobs" = "-W completed Show completed jobs"; "-W not-completed Show pending jobs" = "-W not-completed Show pending jobs"; "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors" = "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors"; "-X Produce XML plist instead of plain text" = "-X Produce XML plist instead of plain text"; "-a Cancel all jobs" = "-a Cancel all jobs"; "-a Show jobs on all destinations" = "-a Show jobs on all destinations"; "-a [destination(s)] Show the accepting state of destinations" = "-a [destination(s)] Show the accepting state of destinations"; "-a filename.conf Load printer attributes from conf file" = "-a filename.conf Load printer attributes from conf file"; "-c Make a copy of the print file(s)" = "-c Make a copy of the print file(s)"; "-c Produce CSV output" = "-c Produce CSV output"; "-c [class(es)] Show classes and their member printers" = "-c [class(es)] Show classes and their member printers"; "-c class Add the named destination to a class" = "-c class Add the named destination to a class"; "-c command Set print command" = "-c command Set print command"; "-c cupsd.conf Set cupsd.conf file to use." = "-c cupsd.conf Set cupsd.conf file to use."; "-d Show the default destination" = "-d Show the default destination"; "-d destination Set default destination" = "-d destination Set default destination"; "-d destination Set the named destination as the server default" = "-d destination Set the named destination as the server default"; "-d destination Specify the destination" = "-d destination Specify the destination"; "-d name=value Set named variable to value" = "-d name=value Set named variable to value"; "-d regex Match domain to regular expression" = "-d regex Match domain to regular expression"; "-d spool-directory Set spool directory" = "-d spool-directory Set spool directory"; "-e Show available destinations on the network" = "-e Show available destinations on the network"; "-f Run in the foreground." = "-f Run in the foreground."; "-f filename Set default request filename" = "-f filename Set default request filename"; "-f type/subtype[,...] Set supported file types" = "-f type/subtype[,…] Set supported file types"; "-h Show this usage message." = "-h Show this usage message."; "-h Validate HTTP response headers" = "-h Validate HTTP response headers"; "-h regex Match hostname to regular expression" = "-h regex Match hostname to regular expression"; "-h server[:port] Connect to the named server and port" = "-h server[:port] Connect to the named server and port"; "-i iconfile.png[,...] Set icon file(s)" = "-i iconfile.png[,…] Set icon file(s)"; "-i id Specify an existing job ID to modify" = "-i id Specify an existing job ID to modify"; "-i ppd-file Specify a PPD file for the printer" = "-i ppd-file Specify a PPD file for the printer"; "-i seconds Repeat the last file with the given time interval" = "-i seconds Repeat the last file with the given time interval"; "-k Keep job spool files" = "-k Keep job spool files"; "-l List attributes" = "-l List attributes"; "-l Produce plain text output" = "-l Produce plain text output"; "-l Run cupsd on demand." = "-l Run cupsd on demand."; "-l Show supported options and values" = "-l Show supported options and values"; "-l Show verbose (long) output" = "-l Show verbose (long) output"; "-l location Set location of printer" = "-l location Set location of printer"; "-m Send an email notification when the job completes" = "-m Send an email notification when the job completes"; "-m Show models" = "-m Show models"; "-m everywhere Specify the printer is compatible with IPP Everywhere" = "-m everywhere Specify the printer is compatible with IPP Everywhere"; "-m model Set model name (default=Printer)" = "-m model Set model name (default=Printer)"; "-m model Specify a standard model/PPD file for the printer" = "-m model Specify a standard model/PPD file for the printer"; "-n count Repeat the last file the given number of times" = "-n count Repeat the last file the given number of times"; "-n hostname Set hostname for printer" = "-n hostname Set hostname for printer"; "-n num-copies Specify the number of copies to print" = "-n num-copies Specify the number of copies to print"; "-n regex Match service name to regular expression" = "-n regex Match service name to regular expression"; "-o Name=Value Specify the default value for the named PPD option " = "-o Name=Value Specify the default value for the named PPD option "; "-o [destination(s)] Show jobs" = "-o [destination(s)] Show jobs"; "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP" = "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP"; "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP" = "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP"; "-o job-k-limit=N Specify the kilobyte limit for per-user quotas" = "-o job-k-limit=N Specify the kilobyte limit for per-user quotas"; "-o job-page-limit=N Specify the page limit for per-user quotas" = "-o job-page-limit=N Specify the page limit for per-user quotas"; "-o job-quota-period=N Specify the per-user quota period in seconds" = "-o job-quota-period=N Specify the per-user quota period in seconds"; "-o job-sheets=standard Print a banner page with the job" = "-o job-sheets=standard Print a banner page with the job"; "-o media=size Specify the media size to use" = "-o media=size Specify the media size to use"; "-o name-default=value Specify the default value for the named option" = "-o name-default=value Specify the default value for the named option"; "-o name[=value] Set default option and value" = "-o name[=value] Set default option and value"; "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)" = "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)"; "-o option[=value] Specify a printer-specific option" = "-o option[=value] Specify a printer-specific option"; "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation" = "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation"; "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)" = "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)"; "-o printer-error-policy=name\n Specify the printer error policy" = "-o printer-error-policy=name\n Specify the printer error policy"; "-o printer-is-shared=true\n Share the printer" = "-o printer-is-shared=true\n Share the printer"; "-o printer-op-policy=name\n Specify the printer operation policy" = "-o printer-op-policy=name\n Specify the printer operation policy"; "-o sides=one-sided Specify 1-sided printing" = "-o sides=one-sided Specify 1-sided printing"; "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing" = "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing"; "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing" = "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing"; "-p Print URI if true" = "-p Print URI if true"; "-p [printer(s)] Show the processing state of destinations" = "-p [printer(s)] Show the processing state of destinations"; "-p destination Specify a destination" = "-p destination Specify a destination"; "-p destination Specify/add the named destination" = "-p destination Specify/add the named destination"; "-p port Set port number for printer" = "-p port Set port number for printer"; "-q Quietly report match via exit code" = "-q Quietly report match via exit code"; "-q Run silently" = "-q Run silently"; "-q Specify the job should be held for printing" = "-q Specify the job should be held for printing"; "-q priority Specify the priority from low (1) to high (100)" = "-q priority Specify the priority from low (1) to high (100)"; "-r Remove the file(s) after submission" = "-r Remove the file(s) after submission"; "-r Show whether the CUPS server is running" = "-r Show whether the CUPS server is running"; "-r True if service is remote" = "-r True if service is remote"; "-r Use 'relaxed' open mode" = "-r Use ‘relaxed’ open mode"; "-r class Remove the named destination from a class" = "-r class Remove the named destination from a class"; "-r reason Specify a reason message that others can see" = "-r reason Specify a reason message that others can see"; "-r subtype,[subtype] Set DNS-SD service subtype" = "-r subtype,[subtype] Set DNS-SD service subtype"; "-s Be silent" = "-s Be silent"; "-s Print service name if true" = "-s Print service name if true"; "-s Show a status summary" = "-s Show a status summary"; "-s cups-files.conf Set cups-files.conf file to use." = "-s cups-files.conf Set cups-files.conf file to use."; "-s speed[,color-speed] Set speed in pages per minute" = "-s speed[,color-speed] Set speed in pages per minute"; "-t Produce a test report" = "-t Produce a test report"; "-t Show all status information" = "-t Show all status information"; "-t Test the configuration file." = "-t Test the configuration file."; "-t key True if the TXT record contains the key" = "-t key True if the TXT record contains the key"; "-t title Specify the job title" = "-t title Specify the job title"; "-u [user(s)] Show jobs queued by the current or specified users" = "-u [user(s)] Show jobs queued by the current or specified users"; "-u allow:all Allow all users to print" = "-u allow:all Allow all users to print"; "-u allow:list Allow the list of users or groups (@name) to print" = "-u allow:list Allow the list of users or groups (@name) to print"; "-u deny:list Prevent the list of users or groups (@name) to print" = "-u deny:list Prevent the list of users or groups (@name) to print"; "-u owner Specify the owner to use for jobs" = "-u owner Specify the owner to use for jobs"; "-u regex Match URI to regular expression" = "-u regex Match URI to regular expression"; "-v Be verbose" = "-v Be verbose"; "-v Show devices" = "-v Show devices"; "-v [printer(s)] Show the devices for each destination" = "-v [printer(s)] Show the devices for each destination"; "-v device-uri Specify the device URI for the printer" = "-v device-uri Specify the device URI for the printer"; "-vv Be very verbose" = "-vv Be very verbose"; "-x Purge jobs rather than just canceling" = "-x Purge jobs rather than just canceling"; "-x destination Remove default options for destination" = "-x destination Remove default options for destination"; "-x destination Remove the named destination" = "-x destination Remove the named destination"; "-x utility [argument ...] ;\n Execute program if true" = "-x utility [argument …] ;\n Execute program if true"; "/etc/cups/lpoptions file names default destination that does not exist." = "/etc/cups/lpoptions file names default destination that does not exist."; "0" = "0"; "1" = "1"; "1 inch/sec." = "1 inch/sec."; "1.25x0.25\"" = "1.25x0.25″"; "1.25x2.25\"" = "1.25x2.25″"; "1.5 inch/sec." = "1.5 inch/sec."; "1.50x0.25\"" = "1.50x0.25″"; "1.50x0.50\"" = "1.50x0.50″"; "1.50x1.00\"" = "1.50x1.00″"; "1.50x2.00\"" = "1.50x2.00″"; "10" = "10"; "10 inches/sec." = "10 inches/sec."; "10 x 11" = "10 x 11"; "10 x 13" = "10 x 13"; "10 x 14" = "10 x 14"; "100" = "100"; "100 mm/sec." = "100 mm/sec."; "105" = "105"; "11" = "11"; "11 inches/sec." = "11 inches/sec."; "110" = "110"; "115" = "115"; "12" = "12"; "12 inches/sec." = "12 inches/sec."; "12 x 11" = "12 x 11"; "120" = "120"; "120 mm/sec." = "120 mm/sec."; "120x60dpi" = "120x60dpi"; "120x72dpi" = "120x72dpi"; "13" = "13"; "136dpi" = "136dpi"; "14" = "14"; "15" = "15"; "15 mm/sec." = "15 mm/sec."; "15 x 11" = "15 x 11"; "150 mm/sec." = "150 mm/sec."; "150dpi" = "150dpi"; "16" = "16"; "17" = "17"; "18" = "18"; "180dpi" = "180dpi"; "19" = "19"; "2" = "2"; "2 inches/sec." = "2 inches/sec."; "2-Sided Printing" = "2-Sided Printing"; "2.00x0.37\"" = "2.00x0.37″"; "2.00x0.50\"" = "2.00x0.50″"; "2.00x1.00\"" = "2.00x1.00″"; "2.00x1.25\"" = "2.00x1.25″"; "2.00x2.00\"" = "2.00x2.00″"; "2.00x3.00\"" = "2.00x3.00″"; "2.00x4.00\"" = "2.00x4.00″"; "2.00x5.50\"" = "2.00x5.50″"; "2.25x0.50\"" = "2.25x0.50″"; "2.25x1.25\"" = "2.25x1.25″"; "2.25x4.00\"" = "2.25x4.00″"; "2.25x5.50\"" = "2.25x5.50″"; "2.38x5.50\"" = "2.38x5.50″"; "2.5 inches/sec." = "2.5 inches/sec."; "2.50x1.00\"" = "2.50x1.00″"; "2.50x2.00\"" = "2.50x2.00″"; "2.75x1.25\"" = "2.75x1.25″"; "2.9 x 1\"" = "2.9 x 1″"; "20" = "20"; "20 mm/sec." = "20 mm/sec."; "200 mm/sec." = "200 mm/sec."; "203dpi" = "203dpi"; "21" = "21"; "22" = "22"; "23" = "23"; "24" = "24"; "24-Pin Series" = "24-Pin Series"; "240x72dpi" = "240x72dpi"; "25" = "25"; "250 mm/sec." = "250 mm/sec."; "26" = "26"; "27" = "27"; "28" = "28"; "29" = "29"; "3" = "3"; "3 inches/sec." = "3 inches/sec."; "3 x 5" = "3 x 5"; "3.00x1.00\"" = "3.00x1.00″"; "3.00x1.25\"" = "3.00x1.25″"; "3.00x2.00\"" = "3.00x2.00″"; "3.00x3.00\"" = "3.00x3.00″"; "3.00x4.00\"" = "3.00x4.00″"; "3.00x5.00\"" = "3.00x5.00″"; "3.00x6.00\"" = "3.00x6.00″"; "3.00x8.00\"" = "3.00x8.00″"; "3.25x2.00\"" = "3.25x2.00″"; "3.25x5.00\"" = "3.25x5.00″"; "3.25x5.50\"" = "3.25x5.50″"; "3.25x5.83\"" = "3.25x5.83″"; "3.25x7.83\"" = "3.25x7.83″"; "3.5 x 5" = "3.5 x 5"; "3.5\" Disk" = "3.5″ Disk"; "3.50x1.00\"" = "3.50x1.00″"; "30" = "30"; "30 mm/sec." = "30 mm/sec."; "300 mm/sec." = "300 mm/sec."; "300dpi" = "300dpi"; "30859 Paint Can Label" = "30859 Paint Can Label"; "35" = "35"; "360dpi" = "360dpi"; "360x180dpi" = "360x180dpi"; "4" = "4"; "4 inches/sec." = "4 inches/sec."; "4.00x1.00\"" = "4.00x1.00″"; "4.00x13.00\"" = "4.00x13.00″"; "4.00x2.00\"" = "4.00x2.00″"; "4.00x2.50\"" = "4.00x2.50″"; "4.00x3.00\"" = "4.00x3.00″"; "4.00x4.00\"" = "4.00x4.00″"; "4.00x5.00\"" = "4.00x5.00″"; "4.00x6.00\"" = "4.00x6.00″"; "4.00x6.50\"" = "4.00x6.50″"; "4.00x8.00\"" = "4.00x8.00″"; "40" = "40"; "40 mm/sec." = "40 mm/sec."; "45" = "45"; "5" = "5"; "5 inches/sec." = "5 inches/sec."; "5 x 7" = "5 x 7"; "50" = "50"; "55" = "55"; "6" = "6"; "6 inches/sec." = "6 inches/sec."; "6.00x1.00\"" = "6.00x1.00″"; "6.00x2.00\"" = "6.00x2.00″"; "6.00x3.00\"" = "6.00x3.00″"; "6.00x4.00\"" = "6.00x4.00″"; "6.00x5.00\"" = "6.00x5.00″"; "6.00x6.00\"" = "6.00x6.00″"; "6.00x6.50\"" = "6.00x6.50″"; "6.00x8.00\"" = "6.00x8.00″"; "60" = "60"; "60 mm/sec." = "60 mm/sec."; "600dpi" = "600dpi"; "60dpi" = "60dpi"; "60x72dpi" = "60x72dpi"; "65" = "65"; "7" = "7"; "7 inches/sec." = "7 inches/sec."; "7 x 9" = "7 x 9"; "70" = "70"; "75" = "75"; "8" = "8"; "8 inches/sec." = "8 inches/sec."; "8 x 10" = "8 x 10"; "8.00x1.00\"" = "8.00x1.00″"; "8.00x2.00\"" = "8.00x2.00″"; "8.00x3.00\"" = "8.00x3.00″"; "8.00x4.00\"" = "8.00x4.00″"; "8.00x5.00\"" = "8.00x5.00″"; "8.00x6.00\"" = "8.00x6.00″"; "8.00x6.50\"" = "8.00x6.50″"; "8.26x1.00\"" = "8.26x1.00″"; "80" = "80"; "80 mm/sec." = "80 mm/sec."; "80x50mm" = "80x50mm"; "85" = "85"; "9" = "9"; "9 inches/sec." = "9 inches/sec."; "9 x 11" = "9 x 11"; "9 x 12" = "9 x 12"; "9-Pin Series" = "9-Pin Series"; "90" = "90"; "95" = "95"; "?Invalid help command unknown." = "?Invalid help command unknown."; "A class named \"%s\" already exists." = "A class named “%s” already exists."; "A printer named \"%s\" already exists." = "A printer named “%s” already exists."; "A0" = "A0"; "A0 Long Edge" = "A0 Long Edge"; "A1" = "A1"; "A1 Long Edge" = "A1 Long Edge"; "A10" = "A10"; "A2" = "A2"; "A2 Long Edge" = "A2 Long Edge"; "A3" = "A3"; "A3 Long Edge" = "A3 Long Edge"; "A3 Oversize" = "A3 Oversize"; "A3 Oversize Long Edge" = "A3 Oversize Long Edge"; "A4" = "A4"; "A4 Long Edge" = "A4 Long Edge"; "A4 Oversize" = "A4 Oversize"; "A4 Small" = "A4 Small"; "A5" = "A5"; "A5 Long Edge" = "A5 Long Edge"; "A5 Oversize" = "A5 Oversize"; "A6" = "A6"; "A6 Long Edge" = "A6 Long Edge"; "A7" = "A7"; "A8" = "A8"; "A9" = "A9"; "ANSI A" = "ANSI A"; "ANSI B" = "ANSI B"; "ANSI C" = "ANSI C"; "ANSI D" = "ANSI D"; "ANSI E" = "ANSI E"; "ARCH C" = "ARCH C"; "ARCH C Long Edge" = "ARCH C Long Edge"; "ARCH D" = "ARCH D"; "ARCH D Long Edge" = "ARCH D Long Edge"; "ARCH E" = "ARCH E"; "ARCH E Long Edge" = "ARCH E Long Edge"; "Accept Jobs" = "Accept Jobs"; "Accepted" = "Accepted"; "Add Class" = "Add Class"; "Add Printer" = "Add Printer"; "Address" = "Address"; "Administration" = "Administration"; "Always" = "Always"; "AppSocket/HP JetDirect" = "AppSocket/HP JetDirect"; "Applicator" = "Applicator"; "Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d."; "Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group."; "Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type."; "Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x)."; "B0" = "B0"; "B1" = "B1"; "B10" = "B10"; "B2" = "B2"; "B3" = "B3"; "B4" = "B4"; "B5" = "B5"; "B5 Oversize" = "B5 Oversize"; "B6" = "B6"; "B7" = "B7"; "B8" = "B8"; "B9" = "B9"; "Bad \"printer-id\" value %d." = "Bad “printer-id” value %d."; "Bad '%s' value." = "Bad ‘%s’ value."; "Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”."; "Bad CloseUI/JCLCloseUI" = "Bad CloseUI/JCLCloseUI"; "Bad NULL dests pointer" = "Bad NULL dests pointer"; "Bad OpenGroup" = "Bad OpenGroup"; "Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI"; "Bad OrderDependency" = "Bad OrderDependency"; "Bad PPD cache file." = "Bad PPD cache file."; "Bad PPD file." = "Bad PPD file."; "Bad Request" = "Bad Request"; "Bad SNMP version number" = "Bad SNMP version number"; "Bad UIConstraints" = "Bad UIConstraints"; "Bad URI." = "Bad URI."; "Bad arguments to function" = "Bad arguments to function"; "Bad copies value %d." = "Bad copies value %d."; "Bad custom parameter" = "Bad custom parameter"; "Bad device-uri \"%s\"." = "Bad device-uri “%s”."; "Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”."; "Bad document-format \"%s\"." = "Bad document-format “%s”."; "Bad document-format-default \"%s\"." = "Bad document-format-default “%s”."; "Bad filename buffer" = "Bad filename buffer"; "Bad hostname/address in URI" = "Bad hostname/address in URI"; "Bad job-name value: %s" = "Bad job-name value: %s"; "Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count."; "Bad job-priority value." = "Bad job-priority value."; "Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”."; "Bad job-sheets value type." = "Bad job-sheets value type."; "Bad job-state value." = "Bad job-state value."; "Bad job-uri \"%s\"." = "Bad job-uri “%s”."; "Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”."; "Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”."; "Bad notify-user-data \"%s\"." = "Bad notify-user-data “%s”."; "Bad number-up value %d." = "Bad number-up value %d."; "Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d."; "Bad port number in URI" = "Bad port number in URI"; "Bad port-monitor \"%s\"." = "Bad port-monitor “%s”."; "Bad printer-state value %d." = "Bad printer-state value %d."; "Bad printer-uri." = "Bad printer-uri."; "Bad request ID %d." = "Bad request ID %d."; "Bad request version number %d.%d." = "Bad request version number %d.%d."; "Bad resource in URI" = "Bad resource in URI"; "Bad scheme in URI" = "Bad scheme in URI"; "Bad username in URI" = "Bad username in URI"; "Bad value string" = "Bad value string"; "Bad/empty URI" = "Bad/empty URI"; "Banners" = "Banners"; "Bond Paper" = "Bond Paper"; "Booklet" = "Booklet"; "Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”."; "Buffer overflow detected, aborting." = "Buffer overflow detected, aborting."; "CMYK" = "CMYK"; "CPCL Label Printer" = "CPCL Label Printer"; "Cancel Jobs" = "Cancel Jobs"; "Canceling print job." = "Canceling print job."; "Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues."; "Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer."; "Cassette" = "Cassette"; "Change Settings" = "Change Settings"; "Character set \"%s\" not supported." = "Character set “%s” not supported."; "Classes" = "Classes"; "Clean Print Heads" = "Clean Print Heads"; "Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute."; "Color" = "Color"; "Color Mode" = "Color Mode"; "Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?"; "Community name uses indefinite length" = "Community name uses indefinite length"; "Connected to printer." = "Connected to printer."; "Connecting to printer." = "Connecting to printer."; "Continue" = "Continue"; "Continuous" = "Continuous"; "Control file sent successfully." = "Control file sent successfully."; "Copying print data." = "Copying print data."; "Created" = "Created"; "Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate."; "Credentials have expired." = "Credentials have expired."; "Custom" = "Custom"; "CustominCutInterval" = "CustominCutInterval"; "CustominTearInterval" = "CustominTearInterval"; "Cut" = "Cut"; "Cutter" = "Cutter"; "DYMO" = "DYMO"; "Dark" = "Dark"; "Darkness" = "Darkness"; "Data file sent successfully." = "Data file sent successfully."; "Deep Color" = "Deep Color"; "Deep Gray" = "Deep Gray"; "Delete Class" = "Delete Class"; "Delete Printer" = "Delete Printer"; "DeskJet Series" = "DeskJet Series"; "Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs."; "Device CMYK" = "Device CMYK"; "Device Gray" = "Device Gray"; "Device RGB" = "Device RGB"; "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s"; "Direct Thermal Media" = "Direct Thermal Media"; "Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path."; "Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d)."; "Directory \"%s\" is a file." = "Directory “%s” is a file."; "Directory \"%s\" not available: %s" = "Directory “%s” not available: %s"; "Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d)."; "Disabled" = "Disabled"; "Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d."; "Draft" = "Draft"; "Duplexer" = "Duplexer"; "EPL1 Label Printer" = "EPL1 Label Printer"; "EPL2 Label Printer" = "EPL2 Label Printer"; "Edit Configuration File" = "Edit Configuration File"; "Encryption is not supported." = "Encryption is not supported."; // TRANSLATORS: Banner/cover sheet after the print job. "Ending Banner" = "Ending Banner"; "English" = "English"; "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket."; "Envelope #10" = "Envelope #10"; "Envelope #11" = "Envelope #11"; "Envelope #12" = "Envelope #12"; "Envelope #14" = "Envelope #14"; "Envelope #9" = "Envelope #9"; "Envelope B4" = "Envelope B4"; "Envelope B5" = "Envelope B5"; "Envelope B6" = "Envelope B6"; "Envelope C0" = "Envelope C0"; "Envelope C1" = "Envelope C1"; "Envelope C2" = "Envelope C2"; "Envelope C3" = "Envelope C3"; "Envelope C4" = "Envelope C4"; "Envelope C5" = "Envelope C5"; "Envelope C6" = "Envelope C6"; "Envelope C65" = "Envelope C65"; "Envelope C7" = "Envelope C7"; "Envelope Choukei 3" = "Envelope Choukei 3"; "Envelope Choukei 3 Long Edge" = "Envelope Choukei 3 Long Edge"; "Envelope Choukei 4" = "Envelope Choukei 4"; "Envelope Choukei 4 Long Edge" = "Envelope Choukei 4 Long Edge"; "Envelope DL" = "Envelope DL"; "Envelope Feed" = "Envelope Feed"; "Envelope Invite" = "Envelope Invite"; "Envelope Italian" = "Envelope Italian"; "Envelope Kaku2" = "Envelope Kaku2"; "Envelope Kaku2 Long Edge" = "Envelope Kaku2 Long Edge"; "Envelope Kaku3" = "Envelope Kaku3"; "Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge"; "Envelope Monarch" = "Envelope Monarch"; "Envelope PRC1" = "Envelope PRC1"; "Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge"; "Envelope PRC10" = "Envelope PRC10"; "Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge"; "Envelope PRC2" = "Envelope PRC2"; "Envelope PRC2 Long Edge" = "Envelope PRC2 Long Edge"; "Envelope PRC3" = "Envelope PRC3"; "Envelope PRC3 Long Edge" = "Envelope PRC3 Long Edge"; "Envelope PRC4" = "Envelope PRC4"; "Envelope PRC4 Long Edge" = "Envelope PRC4 Long Edge"; "Envelope PRC5 Long Edge" = "Envelope PRC5 Long Edge"; "Envelope PRC5PRC5" = "Envelope PRC5PRC5"; "Envelope PRC6" = "Envelope PRC6"; "Envelope PRC6 Long Edge" = "Envelope PRC6 Long Edge"; "Envelope PRC7" = "Envelope PRC7"; "Envelope PRC7 Long Edge" = "Envelope PRC7 Long Edge"; "Envelope PRC8" = "Envelope PRC8"; "Envelope PRC8 Long Edge" = "Envelope PRC8 Long Edge"; "Envelope PRC9" = "Envelope PRC9"; "Envelope PRC9 Long Edge" = "Envelope PRC9 Long Edge"; "Envelope Personal" = "Envelope Personal"; "Envelope You4" = "Envelope You4"; "Envelope You4 Long Edge" = "Envelope You4 Long Edge"; "Environment Variables:" = "Environment Variables:"; "Epson" = "Epson"; "Error Policy" = "Error Policy"; "Error reading raster data." = "Error reading raster data."; "Error sending raster data." = "Error sending raster data."; "Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option."; "European Fanfold" = "European Fanfold"; "European Fanfold Legal" = "European Fanfold Legal"; "Every 10 Labels" = "Every 10 Labels"; "Every 2 Labels" = "Every 2 Labels"; "Every 3 Labels" = "Every 3 Labels"; "Every 4 Labels" = "Every 4 Labels"; "Every 5 Labels" = "Every 5 Labels"; "Every 6 Labels" = "Every 6 Labels"; "Every 7 Labels" = "Every 7 Labels"; "Every 8 Labels" = "Every 8 Labels"; "Every 9 Labels" = "Every 9 Labels"; "Every Label" = "Every Label"; "Executive" = "Executive"; "Expectation Failed" = "Expectation Failed"; "Expressions:" = "Expressions:"; "Fast Grayscale" = "Fast Grayscale"; "File \"%s\" contains a relative path." = "File “%s” contains a relative path."; "File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d)."; "File \"%s\" is a directory." = "File “%s” is a directory."; "File \"%s\" not available: %s" = "File “%s” not available: %s"; "File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d)."; "File Folder" = "File Folder"; "File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”."; "Finished page %d." = "Finished page %d."; "Finishing Preset" = "Finishing Preset"; "Fold" = "Fold"; "Folio" = "Folio"; "Forbidden" = "Forbidden"; "Found" = "Found"; "General" = "General"; "Generic" = "Generic"; "Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length"; "Glossy Paper" = "Glossy Paper"; "Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id."; "GrayScale" = "GrayScale"; "Grayscale" = "Grayscale"; "HP" = "HP"; "Hanging Folder" = "Hanging Folder"; "Hash buffer too small." = "Hash buffer too small."; "Help file not in index." = "Help file not in index."; "High" = "High"; "IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags."; "IPP attribute has no name." = "IPP attribute has no name."; "IPP attribute is not a member of the message." = "IPP attribute is not a member of the message."; "IPP begCollection value not 0 bytes." = "IPP begCollection value not 0 bytes."; "IPP boolean value not 1 byte." = "IPP boolean value not 1 byte."; "IPP date value not 11 bytes." = "IPP date value not 11 bytes."; "IPP endCollection value not 0 bytes." = "IPP endCollection value not 0 bytes."; "IPP enum value not 4 bytes." = "IPP enum value not 4 bytes."; "IPP extension tag larger than 0x7FFFFFFF." = "IPP extension tag larger than 0x7FFFFFFF."; "IPP integer value not 4 bytes." = "IPP integer value not 4 bytes."; "IPP language length overflows value." = "IPP language length overflows value."; "IPP language length too large." = "IPP language length too large."; "IPP member name is not empty." = "IPP member name is not empty."; "IPP memberName value is empty." = "IPP memberName value is empty."; "IPP memberName with no attribute." = "IPP memberName with no attribute."; "IPP name larger than 32767 bytes." = "IPP name larger than 32767 bytes."; "IPP nameWithLanguage value less than minimum 4 bytes." = "IPP nameWithLanguage value less than minimum 4 bytes."; "IPP octetString length too large." = "IPP octetString length too large."; "IPP rangeOfInteger value not 8 bytes." = "IPP rangeOfInteger value not 8 bytes."; "IPP resolution value not 9 bytes." = "IPP resolution value not 9 bytes."; "IPP string length overflows value." = "IPP string length overflows value."; "IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes."; "IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes."; "IPPFIND_SERVICE_DOMAIN Domain name" = "IPPFIND_SERVICE_DOMAIN Domain name"; "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name"; "IPPFIND_SERVICE_NAME Service instance name" = "IPPFIND_SERVICE_NAME Service instance name"; "IPPFIND_SERVICE_PORT Port number" = "IPPFIND_SERVICE_PORT Port number"; "IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = "IPPFIND_SERVICE_REGTYPE DNS-SD registration type"; "IPPFIND_SERVICE_SCHEME URI scheme" = "IPPFIND_SERVICE_SCHEME URI scheme"; "IPPFIND_SERVICE_URI URI" = "IPPFIND_SERVICE_URI URI"; "IPPFIND_TXT_* Value of TXT record key" = "IPPFIND_TXT_* Value of TXT record key"; "ISOLatin1" = "ISOLatin1"; "Illegal control character" = "Illegal control character"; "Illegal main keyword string" = "Illegal main keyword string"; "Illegal option keyword string" = "Illegal option keyword string"; "Illegal translation string" = "Illegal translation string"; "Illegal whitespace character" = "Illegal whitespace character"; "Installable Options" = "Installable Options"; "Installed" = "Installed"; "IntelliBar Label Printer" = "IntelliBar Label Printer"; "Intellitech" = "Intellitech"; "Internal Server Error" = "Internal Server Error"; "Internal error" = "Internal error"; "Internet Postage 2-Part" = "Internet Postage 2-Part"; "Internet Postage 3-Part" = "Internet Postage 3-Part"; "Internet Printing Protocol" = "Internet Printing Protocol"; "Invalid group tag." = "Invalid group tag."; "Invalid media name arguments." = "Invalid media name arguments."; "Invalid media size." = "Invalid media size."; "Invalid named IPP attribute in collection." = "Invalid named IPP attribute in collection."; "Invalid ppd-name value." = "Invalid ppd-name value."; "Invalid printer command \"%s\"." = "Invalid printer command “%s”."; "JCL" = "JCL"; "JIS B0" = "JIS B0"; "JIS B1" = "JIS B1"; "JIS B10" = "JIS B10"; "JIS B2" = "JIS B2"; "JIS B3" = "JIS B3"; "JIS B4" = "JIS B4"; "JIS B4 Long Edge" = "JIS B4 Long Edge"; "JIS B5" = "JIS B5"; "JIS B5 Long Edge" = "JIS B5 Long Edge"; "JIS B6" = "JIS B6"; "JIS B6 Long Edge" = "JIS B6 Long Edge"; "JIS B7" = "JIS B7"; "JIS B8" = "JIS B8"; "JIS B9" = "JIS B9"; "Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files."; "Job #%d does not exist." = "Job #%d does not exist."; "Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel."; "Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel."; "Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel."; "Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered."; "Job #%d is not complete." = "Job #%d is not complete."; "Job #%d is not held for authentication." = "Job #%d is not held for authentication."; "Job #%d is not held." = "Job #%d is not held."; "Job Completed" = "Job Completed"; "Job Created" = "Job Created"; "Job Options Changed" = "Job Options Changed"; "Job Stopped" = "Job Stopped"; "Job is completed and cannot be changed." = "Job is completed and cannot be changed."; "Job operation failed" = "Job operation failed"; "Job state cannot be changed." = "Job state cannot be changed."; "Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed."; "Jobs" = "Jobs"; "LPD/LPR Host or Printer" = "LPD/LPR Host or Printer"; "LPDEST environment variable names default destination that does not exist." = "LPDEST environment variable names default destination that does not exist."; "Label Printer" = "Label Printer"; "Label Top" = "Label Top"; "Language \"%s\" not supported." = "Language “%s” not supported."; "Large Address" = "Large Address"; "LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5"; "Letter Oversize" = "Letter Oversize"; "Letter Oversize Long Edge" = "Letter Oversize Long Edge"; "Light" = "Light"; "Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)"; "List Available Printers" = "List Available Printers"; "Listening on port %d." = "Listening on port %d."; "Local printer created." = "Local printer created."; "Long-Edge (Portrait)" = "Long-Edge (Portrait)"; "Looking for printer." = "Looking for printer."; "Main Roll" = "Main Roll"; "Manual Feed" = "Manual Feed"; "Media Size" = "Media Size"; "Media Source" = "Media Source"; "Media Tracking" = "Media Tracking"; "Media Type" = "Media Type"; "Medium" = "Medium"; "Memory allocation error" = "Memory allocation error"; "Missing CloseGroup" = "Missing CloseGroup"; "Missing CloseUI/JCLCloseUI" = "Missing CloseUI/JCLCloseUI"; "Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header"; "Missing asterisk in column 1" = "Missing asterisk in column 1"; "Missing document-number attribute." = "Missing document-number attribute."; "Missing form variable" = "Missing form variable"; "Missing last-document attribute in request." = "Missing last-document attribute in request."; "Missing media or media-col." = "Missing media or media-col."; "Missing media-size in media-col." = "Missing media-size in media-col."; "Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute."; "Missing option keyword" = "Missing option keyword"; "Missing requesting-user-name attribute." = "Missing requesting-user-name attribute."; "Missing required attribute \"%s\"." = "Missing required attribute “%s”."; "Missing required attributes." = "Missing required attributes."; "Missing resource in URI" = "Missing resource in URI"; "Missing scheme in URI" = "Missing scheme in URI"; "Missing value string" = "Missing value string"; "Missing x-dimension in media-size." = "Missing x-dimension in media-size."; "Missing y-dimension in media-size." = "Missing y-dimension in media-size."; "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s" = "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s"; "Modifiers:" = "Modifiers:"; "Modify Class" = "Modify Class"; "Modify Printer" = "Modify Printer"; "Move All Jobs" = "Move All Jobs"; "Move Job" = "Move Job"; "Moved Permanently" = "Moved Permanently"; "NULL PPD file pointer" = "NULL PPD file pointer"; "Name OID uses indefinite length" = "Name OID uses indefinite length"; "Nested classes are not allowed." = "Nested classes are not allowed."; "Never" = "Never"; "New credentials are not valid for name." = "New credentials are not valid for name."; "New credentials are older than stored credentials." = "New credentials are older than stored credentials."; "No" = "No"; "No Content" = "No Content"; "No IPP attributes." = "No IPP attributes."; "No PPD name" = "No PPD name"; "No VarBind SEQUENCE" = "No VarBind SEQUENCE"; "No active connection" = "No active connection"; "No active connection." = "No active connection."; "No active jobs on %s." = "No active jobs on %s."; "No attributes in request." = "No attributes in request."; "No authentication information provided." = "No authentication information provided."; "No common name specified." = "No common name specified."; "No community name" = "No community name"; "No default destination." = "No default destination."; "No default printer." = "No default printer."; "No destinations added." = "No destinations added."; "No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable."; "No error-index" = "No error-index"; "No error-status" = "No error-status"; "No file in print request." = "No file in print request."; "No modification time" = "No modification time"; "No name OID" = "No name OID"; "No pages were found." = "No pages were found."; "No printer name" = "No printer name"; "No printer-uri found" = "No printer-uri found"; "No printer-uri found for class" = "No printer-uri found for class"; "No printer-uri in request." = "No printer-uri in request."; "No request URI." = "No request URI."; "No request protocol version." = "No request protocol version."; "No request sent." = "No request sent."; "No request-id" = "No request-id"; "No stored credentials, not valid for name." = "No stored credentials, not valid for name."; "No subscription attributes in request." = "No subscription attributes in request."; "No subscriptions found." = "No subscriptions found."; "No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE"; "No version number" = "No version number"; "Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)"; "Non-continuous (Web sensing)" = "Non-continuous (Web sensing)"; "None" = "None"; "Normal" = "Normal"; "Not Found" = "Not Found"; "Not Implemented" = "Not Implemented"; "Not Installed" = "Not Installed"; "Not Modified" = "Not Modified"; "Not Supported" = "Not Supported"; "Not allowed to print." = "Not allowed to print."; "Note" = "Note"; "OK" = "OK"; "Off (1-Sided)" = "Off (1-Sided)"; "Oki" = "Oki"; "Online Help" = "Online Help"; "Only local users can create a local printer." = "Only local users can create a local printer."; "Open of %s failed: %s" = "Open of %s failed: %s"; "OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first"; "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first"; "Operation Policy" = "Operation Policy"; "Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature."; "Options Installed" = "Options Installed"; "Options:" = "Options:"; "Other Media" = "Other Media"; "Other Tray" = "Other Tray"; "Out of date PPD cache file." = "Out of date PPD cache file."; "Out of memory." = "Out of memory."; "Output Mode" = "Output Mode"; "PCL Laser Printer" = "PCL Laser Printer"; "PRC16K" = "PRC16K"; "PRC16K Long Edge" = "PRC16K Long Edge"; "PRC32K" = "PRC32K"; "PRC32K Long Edge" = "PRC32K Long Edge"; "PRC32K Oversize" = "PRC32K Oversize"; "PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge"; "PRINTER environment variable names default destination that does not exist." = "PRINTER environment variable names default destination that does not exist."; "Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU"; "Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE"; "ParamCustominCutInterval" = "ParamCustominCutInterval"; "ParamCustominTearInterval" = "ParamCustominTearInterval"; "Password for %s on %s? " = "Password for %s on %s? "; "Pause Class" = "Pause Class"; "Pause Printer" = "Pause Printer"; "Peel-Off" = "Peel-Off"; "Photo" = "Photo"; "Photo Labels" = "Photo Labels"; "Plain Paper" = "Plain Paper"; "Policies" = "Policies"; "Port Monitor" = "Port Monitor"; "PostScript Printer" = "PostScript Printer"; "Postcard" = "Postcard"; "Postcard Double" = "Postcard Double"; "Postcard Double Long Edge" = "Postcard Double Long Edge"; "Postcard Long Edge" = "Postcard Long Edge"; "Preparing to print." = "Preparing to print."; "Print Density" = "Print Density"; "Print Job:" = "Print Job:"; "Print Mode" = "Print Mode"; "Print Quality" = "Print Quality"; "Print Rate" = "Print Rate"; "Print Self-Test Page" = "Print Self-Test Page"; "Print Speed" = "Print Speed"; "Print Test Page" = "Print Test Page"; "Print and Cut" = "Print and Cut"; "Print and Tear" = "Print and Tear"; "Print file sent." = "Print file sent."; "Print job canceled at printer." = "Print job canceled at printer."; "Print job too large." = "Print job too large."; "Print job was not accepted." = "Print job was not accepted."; "Printer \"%s\" already exists." = "Printer “%s” already exists."; "Printer Added" = "Printer Added"; "Printer Default" = "Printer Default"; "Printer Deleted" = "Printer Deleted"; "Printer Modified" = "Printer Modified"; "Printer Paused" = "Printer Paused"; "Printer Settings" = "Printer Settings"; "Printer cannot print supplied content." = "Printer cannot print supplied content."; "Printer cannot print with supplied options." = "Printer cannot print with supplied options."; "Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats."; "Printer:" = "Printer:"; "Printers" = "Printers"; "Printing page %d, %u%% complete." = "Printing page %d, %u%% complete."; "Punch" = "Punch"; "Quarto" = "Quarto"; "Quota limit reached." = "Quota limit reached."; "Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size"; "Reject Jobs" = "Reject Jobs"; "Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d)."; "Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d)."; "Reprint After Error" = "Reprint After Error"; "Request Entity Too Large" = "Request Entity Too Large"; "Resolution" = "Resolution"; "Resume Class" = "Resume Class"; "Resume Printer" = "Resume Printer"; "Return Address" = "Return Address"; "Rewind" = "Rewind"; "SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length"; "SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error"; "Second Roll (DUO/Twin Only)" = "Second Roll (DUO/Twin Only)"; "See Other" = "See Other"; "See remote printer." = "See remote printer."; "Self-signed credentials are blocked." = "Self-signed credentials are blocked."; "Sending data to printer." = "Sending data to printer."; "Server Restarted" = "Server Restarted"; "Server Security Auditing" = "Server Security Auditing"; "Server Started" = "Server Started"; "Server Stopped" = "Server Stopped"; "Server credentials not set." = "Server credentials not set."; "Service Unavailable" = "Service Unavailable"; "Set Allowed Users" = "Set Allowed Users"; "Set As Server Default" = "Set As Server Default"; "Set Class Options" = "Set Class Options"; "Set Printer Options" = "Set Printer Options"; "Set Publishing" = "Set Publishing"; "Shipping Address" = "Shipping Address"; "Short-Edge (Landscape)" = "Short-Edge (Landscape)"; "Special Paper" = "Special Paper"; "Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete."; "Standard" = "Standard"; "Staple" = "Staple"; // TRANSLATORS: Banner/cover sheet before the print job. "Starting Banner" = "Starting Banner"; "Starting page %d." = "Starting page %d."; "Statement" = "Statement"; "Subscription #%d does not exist." = "Subscription #%d does not exist."; "Substitutions:" = "Substitutions:"; "Super A" = "Super A"; "Super B" = "Super B"; "Super B/A3" = "Super B/A3"; "Switching Protocols" = "Switching Protocols"; "Tabloid" = "Tabloid"; "Tabloid Oversize" = "Tabloid Oversize"; "Tabloid Oversize Long Edge" = "Tabloid Oversize Long Edge"; "Tear" = "Tear"; "Tear-Off" = "Tear-Off"; "Tear-Off Adjust Position" = "Tear-Off Adjust Position"; "The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs."; "The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids."; "The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request."; "The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request."; "The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found."; "The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s"; "The PPD file could not be opened." = "The PPD file could not be opened."; "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)."; "The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions."; "The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets)."; "The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists."; "The printer did not respond." = "The printer did not respond."; "The printer is in use." = "The printer is in use."; "The printer is not connected." = "The printer is not connected."; "The printer is not responding." = "The printer is not responding."; "The printer is now connected." = "The printer is now connected."; "The printer is now online." = "The printer is now online."; "The printer is offline." = "The printer is offline."; "The printer is unreachable at this time." = "The printer is unreachable at this time."; "The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time."; "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (' \"), question mark (?), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (’ ″), question mark (?), or the pound sign (#)."; "The printer or class does not exist." = "The printer or class does not exist."; "The printer or class is not shared." = "The printer or class is not shared."; "The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters."; "The printer-uri attribute is required." = "The printer-uri attribute is required."; "The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”."; "The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”."; "The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it."; "The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported."; "There are too many subscriptions." = "There are too many subscriptions."; "There was an unrecoverable USB error." = "There was an unrecoverable USB error."; "Thermal Transfer Media" = "Thermal Transfer Media"; "Too many active jobs." = "Too many active jobs."; "Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2)."; "Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d)."; "Transparency" = "Transparency"; "Tray" = "Tray"; "Tray 1" = "Tray 1"; "Tray 2" = "Tray 2"; "Tray 3" = "Tray 3"; "Tray 4" = "Tray 4"; "Trust on first use is disabled." = "Trust on first use is disabled."; "URI Too Long" = "URI Too Long"; "URI too large" = "URI too large"; "US Fanfold" = "US Fanfold"; "US Ledger" = "US Ledger"; "US Legal" = "US Legal"; "US Legal Oversize" = "US Legal Oversize"; "US Letter" = "US Letter"; "US Letter Long Edge" = "US Letter Long Edge"; "US Letter Oversize" = "US Letter Oversize"; "US Letter Oversize Long Edge" = "US Letter Oversize Long Edge"; "US Letter Small" = "US Letter Small"; "Unable to access cupsd.conf file" = "Unable to access cupsd.conf file"; "Unable to access help file." = "Unable to access help file."; "Unable to add class" = "Unable to add class"; "Unable to add document to print job." = "Unable to add document to print job."; "Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”."; "Unable to add printer" = "Unable to add printer"; "Unable to allocate memory for file types." = "Unable to allocate memory for file types."; "Unable to allocate memory for page info" = "Unable to allocate memory for page info"; "Unable to allocate memory for pages array" = "Unable to allocate memory for pages array"; "Unable to allocate memory for printer" = "Unable to allocate memory for printer"; "Unable to cancel print job." = "Unable to cancel print job."; "Unable to change printer" = "Unable to change printer"; "Unable to change printer-is-shared attribute" = "Unable to change printer-is-shared attribute"; "Unable to change server settings" = "Unable to change server settings"; "Unable to compile mimeMediaType regular expression: %s." = "Unable to compile mimeMediaType regular expression: %s."; "Unable to compile naturalLanguage regular expression: %s." = "Unable to compile naturalLanguage regular expression: %s."; "Unable to configure printer options." = "Unable to configure printer options."; "Unable to connect to host." = "Unable to connect to host."; "Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class."; "Unable to copy PPD file - %s" = "Unable to copy PPD file - %s"; "Unable to copy PPD file." = "Unable to copy PPD file."; "Unable to create credentials from array." = "Unable to create credentials from array."; "Unable to create printer-uri" = "Unable to create printer-uri"; "Unable to create printer." = "Unable to create printer."; "Unable to create server credentials." = "Unable to create server credentials."; "Unable to create spool directory \"%s\": %s" = "Unable to create spool directory “%s”: %s"; "Unable to create temporary file" = "Unable to create temporary file"; "Unable to delete class" = "Unable to delete class"; "Unable to delete printer" = "Unable to delete printer"; "Unable to do maintenance command" = "Unable to do maintenance command"; "Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB"; "Unable to establish a secure connection to host (%d)." = "Unable to establish a secure connection to host (%d)."; "Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid)."; "Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid)."; "Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate)."; "Unable to establish a secure connection to host (host name mismatch)." = "Unable to establish a secure connection to host (host name mismatch)."; "Unable to establish a secure connection to host (peer dropped connection before responding)." = "Unable to establish a secure connection to host (peer dropped connection before responding)."; "Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate)."; "Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate)."; "Unable to establish a secure connection to host." = "Unable to establish a secure connection to host."; "Unable to execute command \"%s\": %s" = "Unable to execute command “%s”: %s"; "Unable to find destination for job" = "Unable to find destination for job"; "Unable to find printer." = "Unable to find printer."; "Unable to find server credentials." = "Unable to find server credentials."; "Unable to get backend exit status." = "Unable to get backend exit status."; "Unable to get class list" = "Unable to get class list"; "Unable to get class status" = "Unable to get class status"; "Unable to get list of printer drivers" = "Unable to get list of printer drivers"; "Unable to get printer attributes" = "Unable to get printer attributes"; "Unable to get printer list" = "Unable to get printer list"; "Unable to get printer status" = "Unable to get printer status"; "Unable to get printer status." = "Unable to get printer status."; "Unable to load help index." = "Unable to load help index."; "Unable to locate printer \"%s\"." = "Unable to locate printer “%s”."; "Unable to locate printer." = "Unable to locate printer."; "Unable to modify class" = "Unable to modify class"; "Unable to modify printer" = "Unable to modify printer"; "Unable to move job" = "Unable to move job"; "Unable to move jobs" = "Unable to move jobs"; "Unable to open PPD file" = "Unable to open PPD file"; "Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:"; "Unable to open device file" = "Unable to open device file"; "Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d."; "Unable to open help file." = "Unable to open help file."; "Unable to open print file" = "Unable to open print file"; "Unable to open raster file" = "Unable to open raster file"; "Unable to print test page" = "Unable to print test page"; "Unable to read print data." = "Unable to read print data."; "Unable to register \"%s.%s\": %d" = "Unable to register “%s.%s”: %d"; "Unable to rename job document file." = "Unable to rename job document file."; "Unable to resolve printer-uri." = "Unable to resolve printer-uri."; "Unable to see in file" = "Unable to see in file"; "Unable to send command to printer driver" = "Unable to send command to printer driver"; "Unable to send data to printer." = "Unable to send data to printer."; "Unable to set options" = "Unable to set options"; "Unable to set server default" = "Unable to set server default"; "Unable to start backend process." = "Unable to start backend process."; "Unable to upload cupsd.conf file" = "Unable to upload cupsd.conf file"; "Unable to use legacy USB class driver." = "Unable to use legacy USB class driver."; "Unable to write print data" = "Unable to write print data"; "Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s"; "Unauthorized" = "Unauthorized"; "Units" = "Units"; "Unknown" = "Unknown"; "Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”."; "Unknown directive \"%s\" on line %d of \"%s\" ignored." = "Unknown directive “%s” on line %d of “%s” ignored."; "Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”."; "Unknown file order: \"%s\"." = "Unknown file order: “%s”."; "Unknown format character: \"%c\"." = "Unknown format character: “%c”."; "Unknown hash algorithm." = "Unknown hash algorithm."; "Unknown media size name." = "Unknown media size name."; "Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”."; "Unknown option \"%s\"." = "Unknown option “%s”."; "Unknown print mode: \"%s\"." = "Unknown print mode: “%s”."; "Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”."; "Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”."; "Unknown request method." = "Unknown request method."; "Unknown request version." = "Unknown request version."; "Unknown scheme in URI" = "Unknown scheme in URI"; "Unknown service name." = "Unknown service name."; "Unknown version option value: \"%s\"." = "Unknown version option value: “%s”."; "Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”."; "Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”."; "Unsupported 'job-hold-until' value." = "Unsupported ‘job-hold-until’ value."; "Unsupported 'job-name' value." = "Unsupported ‘job-name’ value."; "Unsupported character set \"%s\"." = "Unsupported character set “%s”."; "Unsupported compression \"%s\"." = "Unsupported compression “%s”."; "Unsupported document-format \"%s\"." = "Unsupported document-format “%s”."; "Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”."; "Unsupported format \"%s\"." = "Unsupported format “%s”."; "Unsupported margins." = "Unsupported margins."; "Unsupported media value." = "Unsupported media value."; "Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1."; "Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb."; "Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none."; "Unsupported raster data." = "Unsupported raster data."; "Unsupported value type" = "Unsupported value type"; "Upgrade Required" = "Upgrade Required"; "Usage: %s [options] destination(s)" = "Usage: %s [options] destination(s)"; "Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]"; "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]" = "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]"; "Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]"; "Usage: cupsd [options]" = "Usage: cupsd [options]"; "Usage: cupsfilter [ options ] [ -- ] filename" = "Usage: cupsfilter [ options ] [ -- ] filename"; "Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]\n program | cupstestppd [options] -" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]\n program | cupstestppd [options] -"; "Usage: ippeveprinter [options] \"name\"" = "Usage: ippeveprinter [options] “name”"; "Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n ippfind [options] name[.regtype[.domain.]] … [expression]\n ippfind --help\n ippfind --version"; "Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]"; "Usage: lp [options] [--] [file(s)]\n lp [options] -i id" = "Usage: lp [options] [--] [file(s)]\n lp [options] -i id"; "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination" = "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination"; "Usage: lpinfo [options] -m\n lpinfo [options] -v" = "Usage: lpinfo [options] -m\n lpinfo [options] -v"; "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination" = "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination"; "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination" = "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination"; "Usage: lpq [options] [+interval]" = "Usage: lpq [options] [+interval]"; "Usage: lpr [options] [file(s)]" = "Usage: lpr [options] [file(s)]"; "Usage: lprm [options] [id]\n lprm [options] -" = "Usage: lprm [options] [id]\n lprm [options] -"; "Usage: lpstat [options]" = "Usage: lpstat [options]"; "Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]"; "Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html"; "Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]"; "Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]"; "Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]"; "Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]"; "Using spool directory \"%s\"." = "Using spool directory “%s”."; "Value uses indefinite length" = "Value uses indefinite length"; "VarBind uses indefinite length" = "VarBind uses indefinite length"; "Version uses indefinite length" = "Version uses indefinite length"; "Waiting for job to complete." = "Waiting for job to complete."; "Waiting for printer to become available." = "Waiting for printer to become available."; "Waiting for printer to finish." = "Waiting for printer to finish."; "Warning: This program will be removed in a future version of CUPS." = "Warning: This program will be removed in a future version of CUPS."; "Web Interface is Disabled" = "Web Interface is Disabled"; "Yes" = "Yes"; "You cannot access this page." = "You cannot access this page."; "You must access this page using the URL https://%s:%d%s." = "You must access this page using the URL https://%s:%d%s."; "Your account does not have the necessary privileges." = "Your account does not have the necessary privileges."; "ZPL Label Printer" = "ZPL Label Printer"; "Zebra" = "Zebra"; "aborted" = "aborted"; // TRANSLATORS: Accuracy Units "accuracy-units" = "Accuracy Units"; // TRANSLATORS: Millimeters "accuracy-units.mm" = "Millimeters"; // TRANSLATORS: Nanometers "accuracy-units.nm" = "Nanometers"; // TRANSLATORS: Micrometers "accuracy-units.um" = "Micrometers"; // TRANSLATORS: Bale Output "baling" = "Bale Output"; // TRANSLATORS: Bale Using "baling-type" = "Bale Using"; // TRANSLATORS: Band "baling-type.band" = "Band"; // TRANSLATORS: Shrink Wrap "baling-type.shrink-wrap" = "Shrink Wrap"; // TRANSLATORS: Wrap "baling-type.wrap" = "Wrap"; // TRANSLATORS: Bale After "baling-when" = "Bale After"; // TRANSLATORS: Job "baling-when.after-job" = "Job"; // TRANSLATORS: Sets "baling-when.after-sets" = "Sets"; // TRANSLATORS: Bind Output "binding" = "Bind Output"; // TRANSLATORS: Bind Edge "binding-reference-edge" = "Bind Edge"; // TRANSLATORS: Bottom "binding-reference-edge.bottom" = "Bottom"; // TRANSLATORS: Left "binding-reference-edge.left" = "Left"; // TRANSLATORS: Right "binding-reference-edge.right" = "Right"; // TRANSLATORS: Top "binding-reference-edge.top" = "Top"; // TRANSLATORS: Binder Type "binding-type" = "Binder Type"; // TRANSLATORS: Adhesive "binding-type.adhesive" = "Adhesive"; // TRANSLATORS: Comb "binding-type.comb" = "Comb"; // TRANSLATORS: Flat "binding-type.flat" = "Flat"; // TRANSLATORS: Padding "binding-type.padding" = "Padding"; // TRANSLATORS: Perfect "binding-type.perfect" = "Perfect"; // TRANSLATORS: Spiral "binding-type.spiral" = "Spiral"; // TRANSLATORS: Tape "binding-type.tape" = "Tape"; // TRANSLATORS: Velo "binding-type.velo" = "Velo"; "canceled" = "canceled"; // TRANSLATORS: Chamber Humidity "chamber-humidity" = "Chamber Humidity"; // TRANSLATORS: Chamber Temperature "chamber-temperature" = "Chamber Temperature"; // TRANSLATORS: Print Job Cost "charge-info-message" = "Print Job Cost"; // TRANSLATORS: Coat Sheets "coating" = "Coat Sheets"; // TRANSLATORS: Add Coating To "coating-sides" = "Add Coating To"; // TRANSLATORS: Back "coating-sides.back" = "Back"; // TRANSLATORS: Front and Back "coating-sides.both" = "Front and Back"; // TRANSLATORS: Front "coating-sides.front" = "Front"; // TRANSLATORS: Type of Coating "coating-type" = "Type of Coating"; // TRANSLATORS: Archival "coating-type.archival" = "Archival"; // TRANSLATORS: Archival Glossy "coating-type.archival-glossy" = "Archival Glossy"; // TRANSLATORS: Archival Matte "coating-type.archival-matte" = "Archival Matte"; // TRANSLATORS: Archival Semi Gloss "coating-type.archival-semi-gloss" = "Archival Semi Gloss"; // TRANSLATORS: Glossy "coating-type.glossy" = "Glossy"; // TRANSLATORS: High Gloss "coating-type.high-gloss" = "High Gloss"; // TRANSLATORS: Matte "coating-type.matte" = "Matte"; // TRANSLATORS: Semi-gloss "coating-type.semi-gloss" = "Semi-gloss"; // TRANSLATORS: Silicone "coating-type.silicone" = "Silicone"; // TRANSLATORS: Translucent "coating-type.translucent" = "Translucent"; "completed" = "completed"; // TRANSLATORS: Print Confirmation Sheet "confirmation-sheet-print" = "Print Confirmation Sheet"; // TRANSLATORS: Copies "copies" = "Copies"; // TRANSLATORS: Back Cover "cover-back" = "Back Cover"; // TRANSLATORS: Front Cover "cover-front" = "Front Cover"; // TRANSLATORS: Cover Sheet Info "cover-sheet-info" = "Cover Sheet Info"; // TRANSLATORS: Date Time "cover-sheet-info-supported.date-time" = "Date Time"; // TRANSLATORS: From Name "cover-sheet-info-supported.from-name" = "From Name"; // TRANSLATORS: Logo "cover-sheet-info-supported.logo" = "Logo"; // TRANSLATORS: Message "cover-sheet-info-supported.message" = "Message"; // TRANSLATORS: Organization "cover-sheet-info-supported.organization" = "Organization"; // TRANSLATORS: Subject "cover-sheet-info-supported.subject" = "Subject"; // TRANSLATORS: To Name "cover-sheet-info-supported.to-name" = "To Name"; // TRANSLATORS: Printed Cover "cover-type" = "Printed Cover"; // TRANSLATORS: No Cover "cover-type.no-cover" = "No Cover"; // TRANSLATORS: Back Only "cover-type.print-back" = "Back Only"; // TRANSLATORS: Front and Back "cover-type.print-both" = "Front and Back"; // TRANSLATORS: Front Only "cover-type.print-front" = "Front Only"; // TRANSLATORS: None "cover-type.print-none" = "None"; // TRANSLATORS: Cover Output "covering" = "Cover Output"; // TRANSLATORS: Add Cover "covering-name" = "Add Cover"; // TRANSLATORS: Plain "covering-name.plain" = "Plain"; // TRANSLATORS: Pre-cut "covering-name.pre-cut" = "Pre-cut"; // TRANSLATORS: Pre-printed "covering-name.pre-printed" = "Pre-printed"; "cups-deviced failed to execute." = "cups-deviced failed to execute."; "cups-driverd failed to execute." = "cups-driverd failed to execute."; "cupsctl: Cannot set %s directly." = "cupsctl: Cannot set %s directly."; "cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s"; "cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”"; "cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”"; "cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option."; "cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option."; "cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode."; "cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed."; "cupsd: Unable to get current directory." = "cupsd: Unable to get current directory."; "cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file."; "cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting."; "cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting."; "cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d."; "cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d."; "cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified."; "cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s"; "cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option."; "cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option."; // TRANSLATORS: Detailed Status Message "detailed-status-message" = "Detailed Status Message"; "device for %s/%s: %s" = "device for %s/%s: %s"; "device for %s: %s" = "device for %s: %s"; // TRANSLATORS: Copies "document-copies" = "Copies"; // TRANSLATORS: Document Privacy Attributes "document-privacy-attributes" = "Document Privacy Attributes"; // TRANSLATORS: All "document-privacy-attributes.all" = "All"; // TRANSLATORS: Default "document-privacy-attributes.default" = "Default"; // TRANSLATORS: Document Description "document-privacy-attributes.document-description" = "Document Description"; // TRANSLATORS: Document Template "document-privacy-attributes.document-template" = "Document Template"; // TRANSLATORS: None "document-privacy-attributes.none" = "None"; // TRANSLATORS: Document Privacy Scope "document-privacy-scope" = "Document Privacy Scope"; // TRANSLATORS: All "document-privacy-scope.all" = "All"; // TRANSLATORS: Default "document-privacy-scope.default" = "Default"; // TRANSLATORS: None "document-privacy-scope.none" = "None"; // TRANSLATORS: Owner "document-privacy-scope.owner" = "Owner"; // TRANSLATORS: Document State "document-state" = "Document State"; // TRANSLATORS: Detailed Document State "document-state-reasons" = "Detailed Document State"; // TRANSLATORS: Aborted By System "document-state-reasons.aborted-by-system" = "Aborted By System"; // TRANSLATORS: Canceled At Device "document-state-reasons.canceled-at-device" = "Canceled At Device"; // TRANSLATORS: Canceled By Operator "document-state-reasons.canceled-by-operator" = "Canceled By Operator"; // TRANSLATORS: Canceled By User "document-state-reasons.canceled-by-user" = "Canceled By User"; // TRANSLATORS: Completed Successfully "document-state-reasons.completed-successfully" = "Completed Successfully"; // TRANSLATORS: Completed With Errors "document-state-reasons.completed-with-errors" = "Completed With Errors"; // TRANSLATORS: Completed With Warnings "document-state-reasons.completed-with-warnings" = "Completed With Warnings"; // TRANSLATORS: Compression Error "document-state-reasons.compression-error" = "Compression Error"; // TRANSLATORS: Data Insufficient "document-state-reasons.data-insufficient" = "Data Insufficient"; // TRANSLATORS: Digital Signature Did Not Verify "document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify"; // TRANSLATORS: Digital Signature Type Not Supported "document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported"; // TRANSLATORS: Digital Signature Wait "document-state-reasons.digital-signature-wait" = "Digital Signature Wait"; // TRANSLATORS: Document Access Error "document-state-reasons.document-access-error" = "Document Access Error"; // TRANSLATORS: Document Fetchable "document-state-reasons.document-fetchable" = "Document Fetchable"; // TRANSLATORS: Document Format Error "document-state-reasons.document-format-error" = "Document Format Error"; // TRANSLATORS: Document Password Error "document-state-reasons.document-password-error" = "Document Password Error"; // TRANSLATORS: Document Permission Error "document-state-reasons.document-permission-error" = "Document Permission Error"; // TRANSLATORS: Document Security Error "document-state-reasons.document-security-error" = "Document Security Error"; // TRANSLATORS: Document Unprintable Error "document-state-reasons.document-unprintable-error" = "Document Unprintable Error"; // TRANSLATORS: Errors Detected "document-state-reasons.errors-detected" = "Errors Detected"; // TRANSLATORS: Incoming "document-state-reasons.incoming" = "Incoming"; // TRANSLATORS: Interpreting "document-state-reasons.interpreting" = "Interpreting"; // TRANSLATORS: None "document-state-reasons.none" = "None"; // TRANSLATORS: Outgoing "document-state-reasons.outgoing" = "Outgoing"; // TRANSLATORS: Printing "document-state-reasons.printing" = "Printing"; // TRANSLATORS: Processing To Stop Point "document-state-reasons.processing-to-stop-point" = "Processing To Stop Point"; // TRANSLATORS: Queued "document-state-reasons.queued" = "Queued"; // TRANSLATORS: Queued For Marker "document-state-reasons.queued-for-marker" = "Queued For Marker"; // TRANSLATORS: Queued In Device "document-state-reasons.queued-in-device" = "Queued In Device"; // TRANSLATORS: Resources Are Not Ready "document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready"; // TRANSLATORS: Resources Are Not Supported "document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported"; // TRANSLATORS: Submission Interrupted "document-state-reasons.submission-interrupted" = "Submission Interrupted"; // TRANSLATORS: Transforming "document-state-reasons.transforming" = "Transforming"; // TRANSLATORS: Unsupported Compression "document-state-reasons.unsupported-compression" = "Unsupported Compression"; // TRANSLATORS: Unsupported Document Format "document-state-reasons.unsupported-document-format" = "Unsupported Document Format"; // TRANSLATORS: Warnings Detected "document-state-reasons.warnings-detected" = "Warnings Detected"; // TRANSLATORS: Pending "document-state.3" = "Pending"; // TRANSLATORS: Processing "document-state.5" = "Processing"; // TRANSLATORS: Stopped "document-state.6" = "Stopped"; // TRANSLATORS: Canceled "document-state.7" = "Canceled"; // TRANSLATORS: Aborted "document-state.8" = "Aborted"; // TRANSLATORS: Completed "document-state.9" = "Completed"; "error-index uses indefinite length" = "error-index uses indefinite length"; "error-status uses indefinite length" = "error-status uses indefinite length"; "expression --and expression\n Logical AND" = "expression --and expression\n Logical AND"; "expression --or expression\n Logical OR" = "expression --or expression\n Logical OR"; "expression expression Logical AND" = "expression expression Logical AND"; // TRANSLATORS: Feed Orientation "feed-orientation" = "Feed Orientation"; // TRANSLATORS: Long Edge First "feed-orientation.long-edge-first" = "Long Edge First"; // TRANSLATORS: Short Edge First "feed-orientation.short-edge-first" = "Short Edge First"; // TRANSLATORS: Fetch Status Code "fetch-status-code" = "Fetch Status Code"; // TRANSLATORS: Finishing Template "finishing-template" = "Finishing Template"; // TRANSLATORS: Bale "finishing-template.bale" = "Bale"; // TRANSLATORS: Bind "finishing-template.bind" = "Bind"; // TRANSLATORS: Bind Bottom "finishing-template.bind-bottom" = "Bind Bottom"; // TRANSLATORS: Bind Left "finishing-template.bind-left" = "Bind Left"; // TRANSLATORS: Bind Right "finishing-template.bind-right" = "Bind Right"; // TRANSLATORS: Bind Top "finishing-template.bind-top" = "Bind Top"; // TRANSLATORS: Booklet Maker "finishing-template.booklet-maker" = "Booklet Maker"; // TRANSLATORS: Coat "finishing-template.coat" = "Coat"; // TRANSLATORS: Cover "finishing-template.cover" = "Cover"; // TRANSLATORS: Edge Stitch "finishing-template.edge-stitch" = "Edge Stitch"; // TRANSLATORS: Edge Stitch Bottom "finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom"; // TRANSLATORS: Edge Stitch Left "finishing-template.edge-stitch-left" = "Edge Stitch Left"; // TRANSLATORS: Edge Stitch Right "finishing-template.edge-stitch-right" = "Edge Stitch Right"; // TRANSLATORS: Edge Stitch Top "finishing-template.edge-stitch-top" = "Edge Stitch Top"; // TRANSLATORS: Fold "finishing-template.fold" = "Fold"; // TRANSLATORS: Accordion Fold "finishing-template.fold-accordion" = "Accordion Fold"; // TRANSLATORS: Double Gate Fold "finishing-template.fold-double-gate" = "Double Gate Fold"; // TRANSLATORS: Engineering Z Fold "finishing-template.fold-engineering-z" = "Engineering Z Fold"; // TRANSLATORS: Gate Fold "finishing-template.fold-gate" = "Gate Fold"; // TRANSLATORS: Half Fold "finishing-template.fold-half" = "Half Fold"; // TRANSLATORS: Half Z Fold "finishing-template.fold-half-z" = "Half Z Fold"; // TRANSLATORS: Left Gate Fold "finishing-template.fold-left-gate" = "Left Gate Fold"; // TRANSLATORS: Letter Fold "finishing-template.fold-letter" = "Letter Fold"; // TRANSLATORS: Parallel Fold "finishing-template.fold-parallel" = "Parallel Fold"; // TRANSLATORS: Poster Fold "finishing-template.fold-poster" = "Poster Fold"; // TRANSLATORS: Right Gate Fold "finishing-template.fold-right-gate" = "Right Gate Fold"; // TRANSLATORS: Z Fold "finishing-template.fold-z" = "Z Fold"; // TRANSLATORS: JDF F10-1 "finishing-template.jdf-f10-1" = "JDF F10-1"; // TRANSLATORS: JDF F10-2 "finishing-template.jdf-f10-2" = "JDF F10-2"; // TRANSLATORS: JDF F10-3 "finishing-template.jdf-f10-3" = "JDF F10-3"; // TRANSLATORS: JDF F12-1 "finishing-template.jdf-f12-1" = "JDF F12-1"; // TRANSLATORS: JDF F12-10 "finishing-template.jdf-f12-10" = "JDF F12-10"; // TRANSLATORS: JDF F12-11 "finishing-template.jdf-f12-11" = "JDF F12-11"; // TRANSLATORS: JDF F12-12 "finishing-template.jdf-f12-12" = "JDF F12-12"; // TRANSLATORS: JDF F12-13 "finishing-template.jdf-f12-13" = "JDF F12-13"; // TRANSLATORS: JDF F12-14 "finishing-template.jdf-f12-14" = "JDF F12-14"; // TRANSLATORS: JDF F12-2 "finishing-template.jdf-f12-2" = "JDF F12-2"; // TRANSLATORS: JDF F12-3 "finishing-template.jdf-f12-3" = "JDF F12-3"; // TRANSLATORS: JDF F12-4 "finishing-template.jdf-f12-4" = "JDF F12-4"; // TRANSLATORS: JDF F12-5 "finishing-template.jdf-f12-5" = "JDF F12-5"; // TRANSLATORS: JDF F12-6 "finishing-template.jdf-f12-6" = "JDF F12-6"; // TRANSLATORS: JDF F12-7 "finishing-template.jdf-f12-7" = "JDF F12-7"; // TRANSLATORS: JDF F12-8 "finishing-template.jdf-f12-8" = "JDF F12-8"; // TRANSLATORS: JDF F12-9 "finishing-template.jdf-f12-9" = "JDF F12-9"; // TRANSLATORS: JDF F14-1 "finishing-template.jdf-f14-1" = "JDF F14-1"; // TRANSLATORS: JDF F16-1 "finishing-template.jdf-f16-1" = "JDF F16-1"; // TRANSLATORS: JDF F16-10 "finishing-template.jdf-f16-10" = "JDF F16-10"; // TRANSLATORS: JDF F16-11 "finishing-template.jdf-f16-11" = "JDF F16-11"; // TRANSLATORS: JDF F16-12 "finishing-template.jdf-f16-12" = "JDF F16-12"; // TRANSLATORS: JDF F16-13 "finishing-template.jdf-f16-13" = "JDF F16-13"; // TRANSLATORS: JDF F16-14 "finishing-template.jdf-f16-14" = "JDF F16-14"; // TRANSLATORS: JDF F16-2 "finishing-template.jdf-f16-2" = "JDF F16-2"; // TRANSLATORS: JDF F16-3 "finishing-template.jdf-f16-3" = "JDF F16-3"; // TRANSLATORS: JDF F16-4 "finishing-template.jdf-f16-4" = "JDF F16-4"; // TRANSLATORS: JDF F16-5 "finishing-template.jdf-f16-5" = "JDF F16-5"; // TRANSLATORS: JDF F16-6 "finishing-template.jdf-f16-6" = "JDF F16-6"; // TRANSLATORS: JDF F16-7 "finishing-template.jdf-f16-7" = "JDF F16-7"; // TRANSLATORS: JDF F16-8 "finishing-template.jdf-f16-8" = "JDF F16-8"; // TRANSLATORS: JDF F16-9 "finishing-template.jdf-f16-9" = "JDF F16-9"; // TRANSLATORS: JDF F18-1 "finishing-template.jdf-f18-1" = "JDF F18-1"; // TRANSLATORS: JDF F18-2 "finishing-template.jdf-f18-2" = "JDF F18-2"; // TRANSLATORS: JDF F18-3 "finishing-template.jdf-f18-3" = "JDF F18-3"; // TRANSLATORS: JDF F18-4 "finishing-template.jdf-f18-4" = "JDF F18-4"; // TRANSLATORS: JDF F18-5 "finishing-template.jdf-f18-5" = "JDF F18-5"; // TRANSLATORS: JDF F18-6 "finishing-template.jdf-f18-6" = "JDF F18-6"; // TRANSLATORS: JDF F18-7 "finishing-template.jdf-f18-7" = "JDF F18-7"; // TRANSLATORS: JDF F18-8 "finishing-template.jdf-f18-8" = "JDF F18-8"; // TRANSLATORS: JDF F18-9 "finishing-template.jdf-f18-9" = "JDF F18-9"; // TRANSLATORS: JDF F2-1 "finishing-template.jdf-f2-1" = "JDF F2-1"; // TRANSLATORS: JDF F20-1 "finishing-template.jdf-f20-1" = "JDF F20-1"; // TRANSLATORS: JDF F20-2 "finishing-template.jdf-f20-2" = "JDF F20-2"; // TRANSLATORS: JDF F24-1 "finishing-template.jdf-f24-1" = "JDF F24-1"; // TRANSLATORS: JDF F24-10 "finishing-template.jdf-f24-10" = "JDF F24-10"; // TRANSLATORS: JDF F24-11 "finishing-template.jdf-f24-11" = "JDF F24-11"; // TRANSLATORS: JDF F24-2 "finishing-template.jdf-f24-2" = "JDF F24-2"; // TRANSLATORS: JDF F24-3 "finishing-template.jdf-f24-3" = "JDF F24-3"; // TRANSLATORS: JDF F24-4 "finishing-template.jdf-f24-4" = "JDF F24-4"; // TRANSLATORS: JDF F24-5 "finishing-template.jdf-f24-5" = "JDF F24-5"; // TRANSLATORS: JDF F24-6 "finishing-template.jdf-f24-6" = "JDF F24-6"; // TRANSLATORS: JDF F24-7 "finishing-template.jdf-f24-7" = "JDF F24-7"; // TRANSLATORS: JDF F24-8 "finishing-template.jdf-f24-8" = "JDF F24-8"; // TRANSLATORS: JDF F24-9 "finishing-template.jdf-f24-9" = "JDF F24-9"; // TRANSLATORS: JDF F28-1 "finishing-template.jdf-f28-1" = "JDF F28-1"; // TRANSLATORS: JDF F32-1 "finishing-template.jdf-f32-1" = "JDF F32-1"; // TRANSLATORS: JDF F32-2 "finishing-template.jdf-f32-2" = "JDF F32-2"; // TRANSLATORS: JDF F32-3 "finishing-template.jdf-f32-3" = "JDF F32-3"; // TRANSLATORS: JDF F32-4 "finishing-template.jdf-f32-4" = "JDF F32-4"; // TRANSLATORS: JDF F32-5 "finishing-template.jdf-f32-5" = "JDF F32-5"; // TRANSLATORS: JDF F32-6 "finishing-template.jdf-f32-6" = "JDF F32-6"; // TRANSLATORS: JDF F32-7 "finishing-template.jdf-f32-7" = "JDF F32-7"; // TRANSLATORS: JDF F32-8 "finishing-template.jdf-f32-8" = "JDF F32-8"; // TRANSLATORS: JDF F32-9 "finishing-template.jdf-f32-9" = "JDF F32-9"; // TRANSLATORS: JDF F36-1 "finishing-template.jdf-f36-1" = "JDF F36-1"; // TRANSLATORS: JDF F36-2 "finishing-template.jdf-f36-2" = "JDF F36-2"; // TRANSLATORS: JDF F4-1 "finishing-template.jdf-f4-1" = "JDF F4-1"; // TRANSLATORS: JDF F4-2 "finishing-template.jdf-f4-2" = "JDF F4-2"; // TRANSLATORS: JDF F40-1 "finishing-template.jdf-f40-1" = "JDF F40-1"; // TRANSLATORS: JDF F48-1 "finishing-template.jdf-f48-1" = "JDF F48-1"; // TRANSLATORS: JDF F48-2 "finishing-template.jdf-f48-2" = "JDF F48-2"; // TRANSLATORS: JDF F6-1 "finishing-template.jdf-f6-1" = "JDF F6-1"; // TRANSLATORS: JDF F6-2 "finishing-template.jdf-f6-2" = "JDF F6-2"; // TRANSLATORS: JDF F6-3 "finishing-template.jdf-f6-3" = "JDF F6-3"; // TRANSLATORS: JDF F6-4 "finishing-template.jdf-f6-4" = "JDF F6-4"; // TRANSLATORS: JDF F6-5 "finishing-template.jdf-f6-5" = "JDF F6-5"; // TRANSLATORS: JDF F6-6 "finishing-template.jdf-f6-6" = "JDF F6-6"; // TRANSLATORS: JDF F6-7 "finishing-template.jdf-f6-7" = "JDF F6-7"; // TRANSLATORS: JDF F6-8 "finishing-template.jdf-f6-8" = "JDF F6-8"; // TRANSLATORS: JDF F64-1 "finishing-template.jdf-f64-1" = "JDF F64-1"; // TRANSLATORS: JDF F64-2 "finishing-template.jdf-f64-2" = "JDF F64-2"; // TRANSLATORS: JDF F8-1 "finishing-template.jdf-f8-1" = "JDF F8-1"; // TRANSLATORS: JDF F8-2 "finishing-template.jdf-f8-2" = "JDF F8-2"; // TRANSLATORS: JDF F8-3 "finishing-template.jdf-f8-3" = "JDF F8-3"; // TRANSLATORS: JDF F8-4 "finishing-template.jdf-f8-4" = "JDF F8-4"; // TRANSLATORS: JDF F8-5 "finishing-template.jdf-f8-5" = "JDF F8-5"; // TRANSLATORS: JDF F8-6 "finishing-template.jdf-f8-6" = "JDF F8-6"; // TRANSLATORS: JDF F8-7 "finishing-template.jdf-f8-7" = "JDF F8-7"; // TRANSLATORS: Jog Offset "finishing-template.jog-offset" = "Jog Offset"; // TRANSLATORS: Laminate "finishing-template.laminate" = "Laminate"; // TRANSLATORS: Punch "finishing-template.punch" = "Punch"; // TRANSLATORS: Punch Bottom Left "finishing-template.punch-bottom-left" = "Punch Bottom Left"; // TRANSLATORS: Punch Bottom Right "finishing-template.punch-bottom-right" = "Punch Bottom Right"; // TRANSLATORS: 2-hole Punch Bottom "finishing-template.punch-dual-bottom" = "2-hole Punch Bottom"; // TRANSLATORS: 2-hole Punch Left "finishing-template.punch-dual-left" = "2-hole Punch Left"; // TRANSLATORS: 2-hole Punch Right "finishing-template.punch-dual-right" = "2-hole Punch Right"; // TRANSLATORS: 2-hole Punch Top "finishing-template.punch-dual-top" = "2-hole Punch Top"; // TRANSLATORS: Multi-hole Punch Bottom "finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom"; // TRANSLATORS: Multi-hole Punch Left "finishing-template.punch-multiple-left" = "Multi-hole Punch Left"; // TRANSLATORS: Multi-hole Punch Right "finishing-template.punch-multiple-right" = "Multi-hole Punch Right"; // TRANSLATORS: Multi-hole Punch Top "finishing-template.punch-multiple-top" = "Multi-hole Punch Top"; // TRANSLATORS: 4-hole Punch Bottom "finishing-template.punch-quad-bottom" = "4-hole Punch Bottom"; // TRANSLATORS: 4-hole Punch Left "finishing-template.punch-quad-left" = "4-hole Punch Left"; // TRANSLATORS: 4-hole Punch Right "finishing-template.punch-quad-right" = "4-hole Punch Right"; // TRANSLATORS: 4-hole Punch Top "finishing-template.punch-quad-top" = "4-hole Punch Top"; // TRANSLATORS: Punch Top Left "finishing-template.punch-top-left" = "Punch Top Left"; // TRANSLATORS: Punch Top Right "finishing-template.punch-top-right" = "Punch Top Right"; // TRANSLATORS: 3-hole Punch Bottom "finishing-template.punch-triple-bottom" = "3-hole Punch Bottom"; // TRANSLATORS: 3-hole Punch Left "finishing-template.punch-triple-left" = "3-hole Punch Left"; // TRANSLATORS: 3-hole Punch Right "finishing-template.punch-triple-right" = "3-hole Punch Right"; // TRANSLATORS: 3-hole Punch Top "finishing-template.punch-triple-top" = "3-hole Punch Top"; // TRANSLATORS: Saddle Stitch "finishing-template.saddle-stitch" = "Saddle Stitch"; // TRANSLATORS: Staple "finishing-template.staple" = "Staple"; // TRANSLATORS: Staple Bottom Left "finishing-template.staple-bottom-left" = "Staple Bottom Left"; // TRANSLATORS: Staple Bottom Right "finishing-template.staple-bottom-right" = "Staple Bottom Right"; // TRANSLATORS: 2 Staples on Bottom "finishing-template.staple-dual-bottom" = "2 Staples on Bottom"; // TRANSLATORS: 2 Staples on Left "finishing-template.staple-dual-left" = "2 Staples on Left"; // TRANSLATORS: 2 Staples on Right "finishing-template.staple-dual-right" = "2 Staples on Right"; // TRANSLATORS: 2 Staples on Top "finishing-template.staple-dual-top" = "2 Staples on Top"; // TRANSLATORS: Staple Top Left "finishing-template.staple-top-left" = "Staple Top Left"; // TRANSLATORS: Staple Top Right "finishing-template.staple-top-right" = "Staple Top Right"; // TRANSLATORS: 3 Staples on Bottom "finishing-template.staple-triple-bottom" = "3 Staples on Bottom"; // TRANSLATORS: 3 Staples on Left "finishing-template.staple-triple-left" = "3 Staples on Left"; // TRANSLATORS: 3 Staples on Right "finishing-template.staple-triple-right" = "3 Staples on Right"; // TRANSLATORS: 3 Staples on Top "finishing-template.staple-triple-top" = "3 Staples on Top"; // TRANSLATORS: Trim "finishing-template.trim" = "Trim"; // TRANSLATORS: Trim After Every Set "finishing-template.trim-after-copies" = "Trim After Every Set"; // TRANSLATORS: Trim After Every Document "finishing-template.trim-after-documents" = "Trim After Every Document"; // TRANSLATORS: Trim After Job "finishing-template.trim-after-job" = "Trim After Job"; // TRANSLATORS: Trim After Every Page "finishing-template.trim-after-pages" = "Trim After Every Page"; // TRANSLATORS: Trim After Every Set "finishing-template.trim-after-sets" = "Trim After Every Set"; // TRANSLATORS: Trim After Every Page "finishing-template.trim-after-sheets" = "Trim After Every Page"; // TRANSLATORS: Finishings "finishings" = "Finishings"; // TRANSLATORS: Finishings "finishings-col" = "Finishings"; // TRANSLATORS: Fold "finishings.10" = "Fold"; // TRANSLATORS: Z Fold "finishings.100" = "Z Fold"; // TRANSLATORS: Engineering Z Fold "finishings.101" = "Engineering Z Fold"; // TRANSLATORS: Trim "finishings.11" = "Trim"; // TRANSLATORS: Bale "finishings.12" = "Bale"; // TRANSLATORS: Booklet Maker "finishings.13" = "Booklet Maker"; // TRANSLATORS: Jog Offset "finishings.14" = "Jog Offset"; // TRANSLATORS: Coat "finishings.15" = "Coat"; // TRANSLATORS: Laminate "finishings.16" = "Laminate"; // TRANSLATORS: Staple Top Left "finishings.20" = "Staple Top Left"; // TRANSLATORS: Staple Bottom Left "finishings.21" = "Staple Bottom Left"; // TRANSLATORS: Staple Top Right "finishings.22" = "Staple Top Right"; // TRANSLATORS: Staple Bottom Right "finishings.23" = "Staple Bottom Right"; // TRANSLATORS: Edge Stitch Left "finishings.24" = "Edge Stitch Left"; // TRANSLATORS: Edge Stitch Top "finishings.25" = "Edge Stitch Top"; // TRANSLATORS: Edge Stitch Right "finishings.26" = "Edge Stitch Right"; // TRANSLATORS: Edge Stitch Bottom "finishings.27" = "Edge Stitch Bottom"; // TRANSLATORS: 2 Staples on Left "finishings.28" = "2 Staples on Left"; // TRANSLATORS: 2 Staples on Top "finishings.29" = "2 Staples on Top"; // TRANSLATORS: None "finishings.3" = "None"; // TRANSLATORS: 2 Staples on Right "finishings.30" = "2 Staples on Right"; // TRANSLATORS: 2 Staples on Bottom "finishings.31" = "2 Staples on Bottom"; // TRANSLATORS: 3 Staples on Left "finishings.32" = "3 Staples on Left"; // TRANSLATORS: 3 Staples on Top "finishings.33" = "3 Staples on Top"; // TRANSLATORS: 3 Staples on Right "finishings.34" = "3 Staples on Right"; // TRANSLATORS: 3 Staples on Bottom "finishings.35" = "3 Staples on Bottom"; // TRANSLATORS: Staple "finishings.4" = "Staple"; // TRANSLATORS: Punch "finishings.5" = "Punch"; // TRANSLATORS: Bind Left "finishings.50" = "Bind Left"; // TRANSLATORS: Bind Top "finishings.51" = "Bind Top"; // TRANSLATORS: Bind Right "finishings.52" = "Bind Right"; // TRANSLATORS: Bind Bottom "finishings.53" = "Bind Bottom"; // TRANSLATORS: Cover "finishings.6" = "Cover"; // TRANSLATORS: Trim Pages "finishings.60" = "Trim Pages"; // TRANSLATORS: Trim Documents "finishings.61" = "Trim Documents"; // TRANSLATORS: Trim Copies "finishings.62" = "Trim Copies"; // TRANSLATORS: Trim Job "finishings.63" = "Trim Job"; // TRANSLATORS: Bind "finishings.7" = "Bind"; // TRANSLATORS: Punch Top Left "finishings.70" = "Punch Top Left"; // TRANSLATORS: Punch Bottom Left "finishings.71" = "Punch Bottom Left"; // TRANSLATORS: Punch Top Right "finishings.72" = "Punch Top Right"; // TRANSLATORS: Punch Bottom Right "finishings.73" = "Punch Bottom Right"; // TRANSLATORS: 2-hole Punch Left "finishings.74" = "2-hole Punch Left"; // TRANSLATORS: 2-hole Punch Top "finishings.75" = "2-hole Punch Top"; // TRANSLATORS: 2-hole Punch Right "finishings.76" = "2-hole Punch Right"; // TRANSLATORS: 2-hole Punch Bottom "finishings.77" = "2-hole Punch Bottom"; // TRANSLATORS: 3-hole Punch Left "finishings.78" = "3-hole Punch Left"; // TRANSLATORS: 3-hole Punch Top "finishings.79" = "3-hole Punch Top"; // TRANSLATORS: Saddle Stitch "finishings.8" = "Saddle Stitch"; // TRANSLATORS: 3-hole Punch Right "finishings.80" = "3-hole Punch Right"; // TRANSLATORS: 3-hole Punch Bottom "finishings.81" = "3-hole Punch Bottom"; // TRANSLATORS: 4-hole Punch Left "finishings.82" = "4-hole Punch Left"; // TRANSLATORS: 4-hole Punch Top "finishings.83" = "4-hole Punch Top"; // TRANSLATORS: 4-hole Punch Right "finishings.84" = "4-hole Punch Right"; // TRANSLATORS: 4-hole Punch Bottom "finishings.85" = "4-hole Punch Bottom"; // TRANSLATORS: Multi-hole Punch Left "finishings.86" = "Multi-hole Punch Left"; // TRANSLATORS: Multi-hole Punch Top "finishings.87" = "Multi-hole Punch Top"; // TRANSLATORS: Multi-hole Punch Right "finishings.88" = "Multi-hole Punch Right"; // TRANSLATORS: Multi-hole Punch Bottom "finishings.89" = "Multi-hole Punch Bottom"; // TRANSLATORS: Edge Stitch "finishings.9" = "Edge Stitch"; // TRANSLATORS: Accordion Fold "finishings.90" = "Accordion Fold"; // TRANSLATORS: Double Gate Fold "finishings.91" = "Double Gate Fold"; // TRANSLATORS: Gate Fold "finishings.92" = "Gate Fold"; // TRANSLATORS: Half Fold "finishings.93" = "Half Fold"; // TRANSLATORS: Half Z Fold "finishings.94" = "Half Z Fold"; // TRANSLATORS: Left Gate Fold "finishings.95" = "Left Gate Fold"; // TRANSLATORS: Letter Fold "finishings.96" = "Letter Fold"; // TRANSLATORS: Parallel Fold "finishings.97" = "Parallel Fold"; // TRANSLATORS: Poster Fold "finishings.98" = "Poster Fold"; // TRANSLATORS: Right Gate Fold "finishings.99" = "Right Gate Fold"; // TRANSLATORS: Fold "folding" = "Fold"; // TRANSLATORS: Fold Direction "folding-direction" = "Fold Direction"; // TRANSLATORS: Inward "folding-direction.inward" = "Inward"; // TRANSLATORS: Outward "folding-direction.outward" = "Outward"; // TRANSLATORS: Fold Position "folding-offset" = "Fold Position"; // TRANSLATORS: Fold Edge "folding-reference-edge" = "Fold Edge"; // TRANSLATORS: Bottom "folding-reference-edge.bottom" = "Bottom"; // TRANSLATORS: Left "folding-reference-edge.left" = "Left"; // TRANSLATORS: Right "folding-reference-edge.right" = "Right"; // TRANSLATORS: Top "folding-reference-edge.top" = "Top"; // TRANSLATORS: Font Name "font-name-requested" = "Font Name"; // TRANSLATORS: Font Size "font-size-requested" = "Font Size"; // TRANSLATORS: Force Front Side "force-front-side" = "Force Front Side"; // TRANSLATORS: From Name "from-name" = "From Name"; "held" = "held"; "help\t\tGet help on commands." = "help\t\tGet help on commands."; "idle" = "idle"; // TRANSLATORS: Imposition Template "imposition-template" = "Imposition Template"; // TRANSLATORS: None "imposition-template.none" = "None"; // TRANSLATORS: Signature "imposition-template.signature" = "Signature"; // TRANSLATORS: Insert Page Number "insert-after-page-number" = "Insert Page Number"; // TRANSLATORS: Insert Count "insert-count" = "Insert Count"; // TRANSLATORS: Insert Sheet "insert-sheet" = "Insert Sheet"; "ippeveprinter: Unable to open \"%s\": %s on line %d." = "ippeveprinter: Unable to open “%s”: %s on line %d."; "ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s"; "ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or."; "ippfind: Expected key name after %s." = "ippfind: Expected key name after %s."; "ippfind: Expected port range after %s." = "ippfind: Expected port range after %s."; "ippfind: Expected program after %s." = "ippfind: Expected program after %s."; "ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s."; "ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution."; "ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis."; "ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”."; "ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”."; "ippfind: Missing key name after %s." = "ippfind: Missing key name after %s."; "ippfind: Missing name after %s." = "ippfind: Missing name after %s."; "ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis."; "ippfind: Missing program after %s." = "ippfind: Missing program after %s."; "ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s."; "ippfind: Missing semi-colon after %s." = "ippfind: Missing semi-colon after %s."; "ippfind: Out of memory." = "ippfind: Out of memory."; "ippfind: Too many parenthesis." = "ippfind: Too many parenthesis."; "ippfind: Unable to browse or resolve: %s" = "ippfind: Unable to browse or resolve: %s"; "ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s"; "ippfind: Unable to use Bonjour: %s" = "ippfind: Unable to use Bonjour: %s"; "ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”."; "ipptool: \"-i\" and \"-n\" are incompatible with \"--ippserver\", \"-P\", and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “--ippserver”, “-P”, and “-X”."; "ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”."; "ipptool: Bad URI \"%s\"." = "ipptool: Bad URI “%s”."; "ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”."; "ipptool: May only specify a single URI." = "ipptool: May only specify a single URI."; "ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”."; "ipptool: Missing filename for \"--ippserver\"." = "ipptool: Missing filename for “--ippserver”."; "ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”."; "ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”."; "ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”."; "ipptool: URI required before test file." = "ipptool: URI required before test file."; // TRANSLATORS: Job Account ID "job-account-id" = "Job Account ID"; // TRANSLATORS: Job Account Type "job-account-type" = "Job Account Type"; // TRANSLATORS: General "job-account-type.general" = "General"; // TRANSLATORS: Group "job-account-type.group" = "Group"; // TRANSLATORS: None "job-account-type.none" = "None"; // TRANSLATORS: Job Accounting Output Bin "job-accounting-output-bin" = "Job Accounting Output Bin"; // TRANSLATORS: Job Accounting Sheets "job-accounting-sheets" = "Job Accounting Sheets"; // TRANSLATORS: Type of Job Accounting Sheets "job-accounting-sheets-type" = "Type of Job Accounting Sheets"; // TRANSLATORS: None "job-accounting-sheets-type.none" = "None"; // TRANSLATORS: Standard "job-accounting-sheets-type.standard" = "Standard"; // TRANSLATORS: Job Accounting User ID "job-accounting-user-id" = "Job Accounting User ID"; // TRANSLATORS: Job Cancel After "job-cancel-after" = "Cancel job after"; // TRANSLATORS: Copies "job-copies" = "Copies"; // TRANSLATORS: Back Cover "job-cover-back" = "Back Cover"; // TRANSLATORS: Front Cover "job-cover-front" = "Front Cover"; // TRANSLATORS: Delay Output Until "job-delay-output-until" = "Delay Output Until"; // TRANSLATORS: Delay Output Until "job-delay-output-until-time" = "Delay Output Until"; // TRANSLATORS: Daytime "job-delay-output-until.day-time" = "Daytime"; // TRANSLATORS: Evening "job-delay-output-until.evening" = "Evening"; // TRANSLATORS: Released "job-delay-output-until.indefinite" = "Released"; // TRANSLATORS: Night "job-delay-output-until.night" = "Night"; // TRANSLATORS: No Delay "job-delay-output-until.no-delay-output" = "No Delay"; // TRANSLATORS: Second Shift "job-delay-output-until.second-shift" = "Second Shift"; // TRANSLATORS: Third Shift "job-delay-output-until.third-shift" = "Third Shift"; // TRANSLATORS: Weekend "job-delay-output-until.weekend" = "Weekend"; // TRANSLATORS: On Error "job-error-action" = "On Error"; // TRANSLATORS: Abort Job "job-error-action.abort-job" = "Abort Job"; // TRANSLATORS: Cancel Job "job-error-action.cancel-job" = "Cancel Job"; // TRANSLATORS: Continue Job "job-error-action.continue-job" = "Continue Job"; // TRANSLATORS: Suspend Job "job-error-action.suspend-job" = "Suspend Job"; // TRANSLATORS: Print Error Sheet "job-error-sheet" = "Print Error Sheet"; // TRANSLATORS: Type of Error Sheet "job-error-sheet-type" = "Type of Error Sheet"; // TRANSLATORS: None "job-error-sheet-type.none" = "None"; // TRANSLATORS: Standard "job-error-sheet-type.standard" = "Standard"; // TRANSLATORS: Print Error Sheet "job-error-sheet-when" = "Print Error Sheet"; // TRANSLATORS: Always "job-error-sheet-when.always" = "Always"; // TRANSLATORS: On Error "job-error-sheet-when.on-error" = "On Error"; // TRANSLATORS: Job Finishings "job-finishings" = "Job Finishings"; // TRANSLATORS: Hold Until "job-hold-until" = "Hold Until"; // TRANSLATORS: Hold Until "job-hold-until-time" = "Hold Until"; // TRANSLATORS: Daytime "job-hold-until.day-time" = "Daytime"; // TRANSLATORS: Evening "job-hold-until.evening" = "Evening"; // TRANSLATORS: Released "job-hold-until.indefinite" = "Released"; // TRANSLATORS: Night "job-hold-until.night" = "Night"; // TRANSLATORS: No Hold "job-hold-until.no-hold" = "No Hold"; // TRANSLATORS: Second Shift "job-hold-until.second-shift" = "Second Shift"; // TRANSLATORS: Third Shift "job-hold-until.third-shift" = "Third Shift"; // TRANSLATORS: Weekend "job-hold-until.weekend" = "Weekend"; // TRANSLATORS: Job Mandatory Attributes "job-mandatory-attributes" = "Job Mandatory Attributes"; // TRANSLATORS: Title "job-name" = "Title"; // TRANSLATORS: Job Pages "job-pages" = "Job Pages"; // TRANSLATORS: Job Pages "job-pages-col" = "Job Pages"; // TRANSLATORS: Job Phone Number "job-phone-number" = "Job Phone Number"; "job-printer-uri attribute missing." = "job-printer-uri attribute missing."; // TRANSLATORS: Job Priority "job-priority" = "Job Priority"; // TRANSLATORS: Job Privacy Attributes "job-privacy-attributes" = "Job Privacy Attributes"; // TRANSLATORS: All "job-privacy-attributes.all" = "All"; // TRANSLATORS: Default "job-privacy-attributes.default" = "Default"; // TRANSLATORS: Job Description "job-privacy-attributes.job-description" = "Job Description"; // TRANSLATORS: Job Template "job-privacy-attributes.job-template" = "Job Template"; // TRANSLATORS: None "job-privacy-attributes.none" = "None"; // TRANSLATORS: Job Privacy Scope "job-privacy-scope" = "Job Privacy Scope"; // TRANSLATORS: All "job-privacy-scope.all" = "All"; // TRANSLATORS: Default "job-privacy-scope.default" = "Default"; // TRANSLATORS: None "job-privacy-scope.none" = "None"; // TRANSLATORS: Owner "job-privacy-scope.owner" = "Owner"; // TRANSLATORS: Job Recipient Name "job-recipient-name" = "Job Recipient Name"; // TRANSLATORS: Job Retain Until "job-retain-until" = "Retain job until"; // TRANSLATORS: Job Retain Until Interval "job-retain-until-interval" = "Retain job until interval"; // TRANSLATORS: Job Retain Until Time "job-retain-until-time" = "Retain job until time"; // TRANSLATORS: End Of Day "job-retain-until.end-of-day" = "End of day"; // TRANSLATORS: End Of Month "job-retain-until.end-of-month" = "End of month"; // TRANSLATORS: End Of Week "job-retain-until.end-of-week" = "End of week"; // TRANSLATORS: Indefinite "job-retain-until.indefinite" = "Indefinitely"; // TRANSLATORS: None "job-retain-until.none" = "Never"; // TRANSLATORS: Job Save Disposition "job-save-disposition" = "Job Save Disposition"; // TRANSLATORS: Job Sheet Message "job-sheet-message" = "Job Sheet Message"; // TRANSLATORS: Banner Page "job-sheets" = "Banner Page"; // TRANSLATORS: Banner Page "job-sheets-col" = "Banner Page"; // TRANSLATORS: First Page in Document "job-sheets.first-print-stream-page" = "First Page in Document"; // TRANSLATORS: Start and End Sheets "job-sheets.job-both-sheet" = "Start and End Sheets"; // TRANSLATORS: End Sheet "job-sheets.job-end-sheet" = "End Sheet"; // TRANSLATORS: Start Sheet "job-sheets.job-start-sheet" = "Start Sheet"; // TRANSLATORS: None "job-sheets.none" = "None"; // TRANSLATORS: Standard "job-sheets.standard" = "Standard"; // TRANSLATORS: Job State "job-state" = "Job State"; // TRANSLATORS: Job State Message "job-state-message" = "Job State Message"; // TRANSLATORS: Detailed Job State "job-state-reasons" = "Detailed Job State"; // TRANSLATORS: Stopping "job-state-reasons.aborted-by-system" = "Aborted By System"; // TRANSLATORS: Account Authorization Failed "job-state-reasons.account-authorization-failed" = "Account Authorization Failed"; // TRANSLATORS: Account Closed "job-state-reasons.account-closed" = "Account Closed"; // TRANSLATORS: Account Info Needed "job-state-reasons.account-info-needed" = "Account Info Needed"; // TRANSLATORS: Account Limit Reached "job-state-reasons.account-limit-reached" = "Account Limit Reached"; // TRANSLATORS: Decompression error "job-state-reasons.compression-error" = "Compression Error"; // TRANSLATORS: Conflicting Attributes "job-state-reasons.conflicting-attributes" = "Conflicting Attributes"; // TRANSLATORS: Connected To Destination "job-state-reasons.connected-to-destination" = "Connected To Destination"; // TRANSLATORS: Connecting To Destination "job-state-reasons.connecting-to-destination" = "Connecting To Destination"; // TRANSLATORS: Destination Uri Failed "job-state-reasons.destination-uri-failed" = "Destination Uri Failed"; // TRANSLATORS: Digital Signature Did Not Verify "job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify"; // TRANSLATORS: Digital Signature Type Not Supported "job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported"; // TRANSLATORS: Document Access Error "job-state-reasons.document-access-error" = "Document Access Error"; // TRANSLATORS: Document Format Error "job-state-reasons.document-format-error" = "Document Format Error"; // TRANSLATORS: Document Password Error "job-state-reasons.document-password-error" = "Document Password Error"; // TRANSLATORS: Document Permission Error "job-state-reasons.document-permission-error" = "Document Permission Error"; // TRANSLATORS: Document Security Error "job-state-reasons.document-security-error" = "Document Security Error"; // TRANSLATORS: Document Unprintable Error "job-state-reasons.document-unprintable-error" = "Document Unprintable Error"; // TRANSLATORS: Errors Detected "job-state-reasons.errors-detected" = "Errors Detected"; // TRANSLATORS: Canceled at printer "job-state-reasons.job-canceled-at-device" = "Job Canceled At Device"; // TRANSLATORS: Canceled by operator "job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator"; // TRANSLATORS: Canceled by user "job-state-reasons.job-canceled-by-user" = "Job Canceled By User"; // TRANSLATORS: "job-state-reasons.job-completed-successfully" = "Job Completed Successfully"; // TRANSLATORS: Completed with errors "job-state-reasons.job-completed-with-errors" = "Job Completed With Errors"; // TRANSLATORS: Completed with warnings "job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings"; // TRANSLATORS: Insufficient data "job-state-reasons.job-data-insufficient" = "Job Data Insufficient"; // TRANSLATORS: Job Delay Output Until Specified "job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified"; // TRANSLATORS: Job Digital Signature Wait "job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait"; // TRANSLATORS: Job Fetchable "job-state-reasons.job-fetchable" = "Job Fetchable"; // TRANSLATORS: Job Held For Review "job-state-reasons.job-held-for-review" = "Job Held For Review"; // TRANSLATORS: Job held "job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified"; // TRANSLATORS: Incoming "job-state-reasons.job-incoming" = "Job Incoming"; // TRANSLATORS: Interpreting "job-state-reasons.job-interpreting" = "Job Interpreting"; // TRANSLATORS: Outgoing "job-state-reasons.job-outgoing" = "Job Outgoing"; // TRANSLATORS: Job Password Wait "job-state-reasons.job-password-wait" = "Job Password Wait"; // TRANSLATORS: Job Printed Successfully "job-state-reasons.job-printed-successfully" = "Job Printed Successfully"; // TRANSLATORS: Job Printed With Errors "job-state-reasons.job-printed-with-errors" = "Job Printed With Errors"; // TRANSLATORS: Job Printed With Warnings "job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings"; // TRANSLATORS: Printing "job-state-reasons.job-printing" = "Job Printing"; // TRANSLATORS: Preparing to print "job-state-reasons.job-queued" = "Job Queued"; // TRANSLATORS: Processing document "job-state-reasons.job-queued-for-marker" = "Job Queued For Marker"; // TRANSLATORS: Job Release Wait "job-state-reasons.job-release-wait" = "Job Release Wait"; // TRANSLATORS: Restartable "job-state-reasons.job-restartable" = "Job Restartable"; // TRANSLATORS: Job Resuming "job-state-reasons.job-resuming" = "Job Resuming"; // TRANSLATORS: Job Saved Successfully "job-state-reasons.job-saved-successfully" = "Job Saved Successfully"; // TRANSLATORS: Job Saved With Errors "job-state-reasons.job-saved-with-errors" = "Job Saved With Errors"; // TRANSLATORS: Job Saved With Warnings "job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings"; // TRANSLATORS: Job Saving "job-state-reasons.job-saving" = "Job Saving"; // TRANSLATORS: Job Spooling "job-state-reasons.job-spooling" = "Job Spooling"; // TRANSLATORS: Job Streaming "job-state-reasons.job-streaming" = "Job Streaming"; // TRANSLATORS: Suspended "job-state-reasons.job-suspended" = "Job Suspended"; // TRANSLATORS: Job Suspended By Operator "job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator"; // TRANSLATORS: Job Suspended By System "job-state-reasons.job-suspended-by-system" = "Job Suspended By System"; // TRANSLATORS: Job Suspended By User "job-state-reasons.job-suspended-by-user" = "Job Suspended By User"; // TRANSLATORS: Job Suspending "job-state-reasons.job-suspending" = "Job Suspending"; // TRANSLATORS: Job Transferring "job-state-reasons.job-transferring" = "Job Transferring"; // TRANSLATORS: Transforming "job-state-reasons.job-transforming" = "Job Transforming"; // TRANSLATORS: None "job-state-reasons.none" = "None"; // TRANSLATORS: Printer offline "job-state-reasons.printer-stopped" = "Printer Stopped"; // TRANSLATORS: Printer partially stopped "job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly"; // TRANSLATORS: Stopping "job-state-reasons.processing-to-stop-point" = "Processing To Stop Point"; // TRANSLATORS: Ready "job-state-reasons.queued-in-device" = "Queued In Device"; // TRANSLATORS: Resources Are Not Ready "job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready"; // TRANSLATORS: Resources Are Not Supported "job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported"; // TRANSLATORS: Service offline "job-state-reasons.service-off-line" = "Service Off Line"; // TRANSLATORS: Submission Interrupted "job-state-reasons.submission-interrupted" = "Submission Interrupted"; // TRANSLATORS: Unsupported Attributes Or Values "job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values"; // TRANSLATORS: Unsupported Compression "job-state-reasons.unsupported-compression" = "Unsupported Compression"; // TRANSLATORS: Unsupported Document Format "job-state-reasons.unsupported-document-format" = "Unsupported Document Format"; // TRANSLATORS: Waiting For User Action "job-state-reasons.waiting-for-user-action" = "Waiting For User Action"; // TRANSLATORS: Warnings Detected "job-state-reasons.warnings-detected" = "Warnings Detected"; // TRANSLATORS: Pending "job-state.3" = "Pending"; // TRANSLATORS: Held "job-state.4" = "Held"; // TRANSLATORS: Processing "job-state.5" = "Processing"; // TRANSLATORS: Stopped "job-state.6" = "Stopped"; // TRANSLATORS: Canceled "job-state.7" = "Canceled"; // TRANSLATORS: Aborted "job-state.8" = "Aborted"; // TRANSLATORS: Completed "job-state.9" = "Completed"; // TRANSLATORS: Laminate Pages "laminating" = "Laminate Pages"; // TRANSLATORS: Laminate "laminating-sides" = "Laminate"; // TRANSLATORS: Back Only "laminating-sides.back" = "Back Only"; // TRANSLATORS: Front and Back "laminating-sides.both" = "Front and Back"; // TRANSLATORS: Front Only "laminating-sides.front" = "Front Only"; // TRANSLATORS: Type of Lamination "laminating-type" = "Type of Lamination"; // TRANSLATORS: Archival "laminating-type.archival" = "Archival"; // TRANSLATORS: Glossy "laminating-type.glossy" = "Glossy"; // TRANSLATORS: High Gloss "laminating-type.high-gloss" = "High Gloss"; // TRANSLATORS: Matte "laminating-type.matte" = "Matte"; // TRANSLATORS: Semi-gloss "laminating-type.semi-gloss" = "Semi-gloss"; // TRANSLATORS: Translucent "laminating-type.translucent" = "Translucent"; // TRANSLATORS: Logo "logo" = "Logo"; "lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters."; "lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option."; "lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option."; "lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option."; "lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option."; "lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option."; "lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option."; "lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option."; "lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option."; "lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option."; "lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option."; "lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option."; "lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option."; "lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option."; "lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option."; "lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option."; "lpadmin: No member names were seen." = "lpadmin: No member names were seen."; "lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s."; "lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s."; "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS." = "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS."; "lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters."; "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS." = "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS."; "lpadmin: Raw queues are no longer supported on macOS." = "lpadmin: Raw queues are no longer supported on macOS."; "lpadmin: System V interface scripts are no longer supported for security reasons." = "lpadmin: System V interface scripts are no longer supported for security reasons."; "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first."; "lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s"; "lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file"; "lpadmin: Unable to delete option:\n You must specify a printer name first." = "lpadmin: Unable to delete option:\n You must specify a printer name first."; "lpadmin: Unable to open PPD \"%s\": %s" = "lpadmin: Unable to open PPD “%s”: %s"; "lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d."; "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first."; "lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first."; "lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”."; "lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”."; "lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”."; "lpadmin: Use the 'everywhere' model for shared printers." = "lpadmin: Use the ‘everywhere’ model for shared printers."; "lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored."; "lpc> " = "lpc> "; "lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”."; "lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”."; "lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”."; "lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”."; "lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”."; "lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”."; "lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”."; "lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s"; "lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”."; "lpoptions: No printers." = "lpoptions: No printers."; "lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s"; "lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s"; "lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s."; "lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class."; "lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination \"%s\"."; // TRANSLATORS: Amount of Material "material-amount" = "Amount of Material"; // TRANSLATORS: Amount Units "material-amount-units" = "Amount Units"; // TRANSLATORS: Grams "material-amount-units.g" = "Grams"; // TRANSLATORS: Kilograms "material-amount-units.kg" = "Kilograms"; // TRANSLATORS: Liters "material-amount-units.l" = "Liters"; // TRANSLATORS: Meters "material-amount-units.m" = "Meters"; // TRANSLATORS: Milliliters "material-amount-units.ml" = "Milliliters"; // TRANSLATORS: Millimeters "material-amount-units.mm" = "Millimeters"; // TRANSLATORS: Material Color "material-color" = "Material Color"; // TRANSLATORS: Material Diameter "material-diameter" = "Material Diameter"; // TRANSLATORS: Material Diameter Tolerance "material-diameter-tolerance" = "Material Diameter Tolerance"; // TRANSLATORS: Material Fill Density "material-fill-density" = "Material Fill Density"; // TRANSLATORS: Material Name "material-name" = "Material Name"; // TRANSLATORS: Material Nozzle Diameter "material-nozzle-diameter" = "Material Nozzle Diameter"; // TRANSLATORS: Use Material For "material-purpose" = "Use Material For"; // TRANSLATORS: Everything "material-purpose.all" = "Everything"; // TRANSLATORS: Base "material-purpose.base" = "Base"; // TRANSLATORS: In-fill "material-purpose.in-fill" = "In-fill"; // TRANSLATORS: Shell "material-purpose.shell" = "Shell"; // TRANSLATORS: Supports "material-purpose.support" = "Supports"; // TRANSLATORS: Feed Rate "material-rate" = "Feed Rate"; // TRANSLATORS: Feed Rate Units "material-rate-units" = "Feed Rate Units"; // TRANSLATORS: Milligrams per second "material-rate-units.mg_second" = "Milligrams per second"; // TRANSLATORS: Milliliters per second "material-rate-units.ml_second" = "Milliliters per second"; // TRANSLATORS: Millimeters per second "material-rate-units.mm_second" = "Millimeters per second"; // TRANSLATORS: Material Retraction "material-retraction" = "Material Retraction"; // TRANSLATORS: Material Shell Thickness "material-shell-thickness" = "Material Shell Thickness"; // TRANSLATORS: Material Temperature "material-temperature" = "Material Temperature"; // TRANSLATORS: Material Type "material-type" = "Material Type"; // TRANSLATORS: ABS "material-type.abs" = "ABS"; // TRANSLATORS: Carbon Fiber ABS "material-type.abs-carbon-fiber" = "Carbon Fiber ABS"; // TRANSLATORS: Carbon Nanotube ABS "material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS"; // TRANSLATORS: Chocolate "material-type.chocolate" = "Chocolate"; // TRANSLATORS: Gold "material-type.gold" = "Gold"; // TRANSLATORS: Nylon "material-type.nylon" = "Nylon"; // TRANSLATORS: Pet "material-type.pet" = "Pet"; // TRANSLATORS: Photopolymer "material-type.photopolymer" = "Photopolymer"; // TRANSLATORS: PLA "material-type.pla" = "PLA"; // TRANSLATORS: Conductive PLA "material-type.pla-conductive" = "Conductive PLA"; // TRANSLATORS: Pla Dissolvable "material-type.pla-dissolvable" = "Pla Dissolvable"; // TRANSLATORS: Flexible PLA "material-type.pla-flexible" = "Flexible PLA"; // TRANSLATORS: Magnetic PLA "material-type.pla-magnetic" = "Magnetic PLA"; // TRANSLATORS: Steel PLA "material-type.pla-steel" = "Steel PLA"; // TRANSLATORS: Stone PLA "material-type.pla-stone" = "Stone PLA"; // TRANSLATORS: Wood PLA "material-type.pla-wood" = "Wood PLA"; // TRANSLATORS: Polycarbonate "material-type.polycarbonate" = "Polycarbonate"; // TRANSLATORS: Dissolvable PVA "material-type.pva-dissolvable" = "Dissolvable PVA"; // TRANSLATORS: Silver "material-type.silver" = "Silver"; // TRANSLATORS: Titanium "material-type.titanium" = "Titanium"; // TRANSLATORS: Wax "material-type.wax" = "Wax"; // TRANSLATORS: Materials "materials-col" = "Materials"; // TRANSLATORS: Media "media" = "Media"; // TRANSLATORS: Back Coating of Media "media-back-coating" = "Back Coating of Media"; // TRANSLATORS: Glossy "media-back-coating.glossy" = "Glossy"; // TRANSLATORS: High Gloss "media-back-coating.high-gloss" = "High Gloss"; // TRANSLATORS: Matte "media-back-coating.matte" = "Matte"; // TRANSLATORS: None "media-back-coating.none" = "None"; // TRANSLATORS: Satin "media-back-coating.satin" = "Satin"; // TRANSLATORS: Semi-gloss "media-back-coating.semi-gloss" = "Semi-gloss"; // TRANSLATORS: Media Bottom Margin "media-bottom-margin" = "Media Bottom Margin"; // TRANSLATORS: Media "media-col" = "Media"; // TRANSLATORS: Media Color "media-color" = "Media Color"; // TRANSLATORS: Black "media-color.black" = "Black"; // TRANSLATORS: Blue "media-color.blue" = "Blue"; // TRANSLATORS: Brown "media-color.brown" = "Brown"; // TRANSLATORS: Buff "media-color.buff" = "Buff"; // TRANSLATORS: Clear Black "media-color.clear-black" = "Clear Black"; // TRANSLATORS: Clear Blue "media-color.clear-blue" = "Clear Blue"; // TRANSLATORS: Clear Brown "media-color.clear-brown" = "Clear Brown"; // TRANSLATORS: Clear Buff "media-color.clear-buff" = "Clear Buff"; // TRANSLATORS: Clear Cyan "media-color.clear-cyan" = "Clear Cyan"; // TRANSLATORS: Clear Gold "media-color.clear-gold" = "Clear Gold"; // TRANSLATORS: Clear Goldenrod "media-color.clear-goldenrod" = "Clear Goldenrod"; // TRANSLATORS: Clear Gray "media-color.clear-gray" = "Clear Gray"; // TRANSLATORS: Clear Green "media-color.clear-green" = "Clear Green"; // TRANSLATORS: Clear Ivory "media-color.clear-ivory" = "Clear Ivory"; // TRANSLATORS: Clear Magenta "media-color.clear-magenta" = "Clear Magenta"; // TRANSLATORS: Clear Multi Color "media-color.clear-multi-color" = "Clear Multi Color"; // TRANSLATORS: Clear Mustard "media-color.clear-mustard" = "Clear Mustard"; // TRANSLATORS: Clear Orange "media-color.clear-orange" = "Clear Orange"; // TRANSLATORS: Clear Pink "media-color.clear-pink" = "Clear Pink"; // TRANSLATORS: Clear Red "media-color.clear-red" = "Clear Red"; // TRANSLATORS: Clear Silver "media-color.clear-silver" = "Clear Silver"; // TRANSLATORS: Clear Turquoise "media-color.clear-turquoise" = "Clear Turquoise"; // TRANSLATORS: Clear Violet "media-color.clear-violet" = "Clear Violet"; // TRANSLATORS: Clear White "media-color.clear-white" = "Clear White"; // TRANSLATORS: Clear Yellow "media-color.clear-yellow" = "Clear Yellow"; // TRANSLATORS: Cyan "media-color.cyan" = "Cyan"; // TRANSLATORS: Dark Blue "media-color.dark-blue" = "Dark Blue"; // TRANSLATORS: Dark Brown "media-color.dark-brown" = "Dark Brown"; // TRANSLATORS: Dark Buff "media-color.dark-buff" = "Dark Buff"; // TRANSLATORS: Dark Cyan "media-color.dark-cyan" = "Dark Cyan"; // TRANSLATORS: Dark Gold "media-color.dark-gold" = "Dark Gold"; // TRANSLATORS: Dark Goldenrod "media-color.dark-goldenrod" = "Dark Goldenrod"; // TRANSLATORS: Dark Gray "media-color.dark-gray" = "Dark Gray"; // TRANSLATORS: Dark Green "media-color.dark-green" = "Dark Green"; // TRANSLATORS: Dark Ivory "media-color.dark-ivory" = "Dark Ivory"; // TRANSLATORS: Dark Magenta "media-color.dark-magenta" = "Dark Magenta"; // TRANSLATORS: Dark Mustard "media-color.dark-mustard" = "Dark Mustard"; // TRANSLATORS: Dark Orange "media-color.dark-orange" = "Dark Orange"; // TRANSLATORS: Dark Pink "media-color.dark-pink" = "Dark Pink"; // TRANSLATORS: Dark Red "media-color.dark-red" = "Dark Red"; // TRANSLATORS: Dark Silver "media-color.dark-silver" = "Dark Silver"; // TRANSLATORS: Dark Turquoise "media-color.dark-turquoise" = "Dark Turquoise"; // TRANSLATORS: Dark Violet "media-color.dark-violet" = "Dark Violet"; // TRANSLATORS: Dark Yellow "media-color.dark-yellow" = "Dark Yellow"; // TRANSLATORS: Gold "media-color.gold" = "Gold"; // TRANSLATORS: Goldenrod "media-color.goldenrod" = "Goldenrod"; // TRANSLATORS: Gray "media-color.gray" = "Gray"; // TRANSLATORS: Green "media-color.green" = "Green"; // TRANSLATORS: Ivory "media-color.ivory" = "Ivory"; // TRANSLATORS: Light Black "media-color.light-black" = "Light Black"; // TRANSLATORS: Light Blue "media-color.light-blue" = "Light Blue"; // TRANSLATORS: Light Brown "media-color.light-brown" = "Light Brown"; // TRANSLATORS: Light Buff "media-color.light-buff" = "Light Buff"; // TRANSLATORS: Light Cyan "media-color.light-cyan" = "Light Cyan"; // TRANSLATORS: Light Gold "media-color.light-gold" = "Light Gold"; // TRANSLATORS: Light Goldenrod "media-color.light-goldenrod" = "Light Goldenrod"; // TRANSLATORS: Light Gray "media-color.light-gray" = "Light Gray"; // TRANSLATORS: Light Green "media-color.light-green" = "Light Green"; // TRANSLATORS: Light Ivory "media-color.light-ivory" = "Light Ivory"; // TRANSLATORS: Light Magenta "media-color.light-magenta" = "Light Magenta"; // TRANSLATORS: Light Mustard "media-color.light-mustard" = "Light Mustard"; // TRANSLATORS: Light Orange "media-color.light-orange" = "Light Orange"; // TRANSLATORS: Light Pink "media-color.light-pink" = "Light Pink"; // TRANSLATORS: Light Red "media-color.light-red" = "Light Red"; // TRANSLATORS: Light Silver "media-color.light-silver" = "Light Silver"; // TRANSLATORS: Light Turquoise "media-color.light-turquoise" = "Light Turquoise"; // TRANSLATORS: Light Violet "media-color.light-violet" = "Light Violet"; // TRANSLATORS: Light Yellow "media-color.light-yellow" = "Light Yellow"; // TRANSLATORS: Magenta "media-color.magenta" = "Magenta"; // TRANSLATORS: Multi-color "media-color.multi-color" = "Multi-color"; // TRANSLATORS: Mustard "media-color.mustard" = "Mustard"; // TRANSLATORS: No Color "media-color.no-color" = "No Color"; // TRANSLATORS: Orange "media-color.orange" = "Orange"; // TRANSLATORS: Pink "media-color.pink" = "Pink"; // TRANSLATORS: Red "media-color.red" = "Red"; // TRANSLATORS: Silver "media-color.silver" = "Silver"; // TRANSLATORS: Turquoise "media-color.turquoise" = "Turquoise"; // TRANSLATORS: Violet "media-color.violet" = "Violet"; // TRANSLATORS: White "media-color.white" = "White"; // TRANSLATORS: Yellow "media-color.yellow" = "Yellow"; // TRANSLATORS: Front Coating of Media "media-front-coating" = "Front Coating of Media"; // TRANSLATORS: Media Grain "media-grain" = "Media Grain"; // TRANSLATORS: Cross-Feed Direction "media-grain.x-direction" = "Cross-Feed Direction"; // TRANSLATORS: Feed Direction "media-grain.y-direction" = "Feed Direction"; // TRANSLATORS: Media Hole Count "media-hole-count" = "Media Hole Count"; // TRANSLATORS: Media Info "media-info" = "Media Info"; // TRANSLATORS: Force Media "media-input-tray-check" = "Force Media"; // TRANSLATORS: Media Left Margin "media-left-margin" = "Media Left Margin"; // TRANSLATORS: Pre-printed Media "media-pre-printed" = "Pre-printed Media"; // TRANSLATORS: Blank "media-pre-printed.blank" = "Blank"; // TRANSLATORS: Letterhead "media-pre-printed.letter-head" = "Letterhead"; // TRANSLATORS: Pre-printed "media-pre-printed.pre-printed" = "Pre-printed"; // TRANSLATORS: Recycled Media "media-recycled" = "Recycled Media"; // TRANSLATORS: None "media-recycled.none" = "None"; // TRANSLATORS: Standard "media-recycled.standard" = "Standard"; // TRANSLATORS: Media Right Margin "media-right-margin" = "Media Right Margin"; // TRANSLATORS: Media Dimensions "media-size" = "Media Dimensions"; // TRANSLATORS: Media Name "media-size-name" = "Media Name"; // TRANSLATORS: Media Source "media-source" = "Media Source"; // TRANSLATORS: Alternate "media-source.alternate" = "Alternate"; // TRANSLATORS: Alternate Roll "media-source.alternate-roll" = "Alternate Roll"; // TRANSLATORS: Automatic "media-source.auto" = "Automatic"; // TRANSLATORS: Bottom "media-source.bottom" = "Bottom"; // TRANSLATORS: By-pass Tray "media-source.by-pass-tray" = "By-pass Tray"; // TRANSLATORS: Center "media-source.center" = "Center"; // TRANSLATORS: Disc "media-source.disc" = "Disc"; // TRANSLATORS: Envelope "media-source.envelope" = "Envelope"; // TRANSLATORS: Hagaki "media-source.hagaki" = "Hagaki"; // TRANSLATORS: Large Capacity "media-source.large-capacity" = "Large Capacity"; // TRANSLATORS: Left "media-source.left" = "Left"; // TRANSLATORS: Main "media-source.main" = "Main"; // TRANSLATORS: Main Roll "media-source.main-roll" = "Main Roll"; // TRANSLATORS: Manual "media-source.manual" = "Manual"; // TRANSLATORS: Middle "media-source.middle" = "Middle"; // TRANSLATORS: Photo "media-source.photo" = "Photo"; // TRANSLATORS: Rear "media-source.rear" = "Rear"; // TRANSLATORS: Right "media-source.right" = "Right"; // TRANSLATORS: Roll 1 "media-source.roll-1" = "Roll 1"; // TRANSLATORS: Roll 10 "media-source.roll-10" = "Roll 10"; // TRANSLATORS: Roll 2 "media-source.roll-2" = "Roll 2"; // TRANSLATORS: Roll 3 "media-source.roll-3" = "Roll 3"; // TRANSLATORS: Roll 4 "media-source.roll-4" = "Roll 4"; // TRANSLATORS: Roll 5 "media-source.roll-5" = "Roll 5"; // TRANSLATORS: Roll 6 "media-source.roll-6" = "Roll 6"; // TRANSLATORS: Roll 7 "media-source.roll-7" = "Roll 7"; // TRANSLATORS: Roll 8 "media-source.roll-8" = "Roll 8"; // TRANSLATORS: Roll 9 "media-source.roll-9" = "Roll 9"; // TRANSLATORS: Side "media-source.side" = "Side"; // TRANSLATORS: Top "media-source.top" = "Top"; // TRANSLATORS: Tray 1 "media-source.tray-1" = "Tray 1"; // TRANSLATORS: Tray 10 "media-source.tray-10" = "Tray 10"; // TRANSLATORS: Tray 11 "media-source.tray-11" = "Tray 11"; // TRANSLATORS: Tray 12 "media-source.tray-12" = "Tray 12"; // TRANSLATORS: Tray 13 "media-source.tray-13" = "Tray 13"; // TRANSLATORS: Tray 14 "media-source.tray-14" = "Tray 14"; // TRANSLATORS: Tray 15 "media-source.tray-15" = "Tray 15"; // TRANSLATORS: Tray 16 "media-source.tray-16" = "Tray 16"; // TRANSLATORS: Tray 17 "media-source.tray-17" = "Tray 17"; // TRANSLATORS: Tray 18 "media-source.tray-18" = "Tray 18"; // TRANSLATORS: Tray 19 "media-source.tray-19" = "Tray 19"; // TRANSLATORS: Tray 2 "media-source.tray-2" = "Tray 2"; // TRANSLATORS: Tray 20 "media-source.tray-20" = "Tray 20"; // TRANSLATORS: Tray 3 "media-source.tray-3" = "Tray 3"; // TRANSLATORS: Tray 4 "media-source.tray-4" = "Tray 4"; // TRANSLATORS: Tray 5 "media-source.tray-5" = "Tray 5"; // TRANSLATORS: Tray 6 "media-source.tray-6" = "Tray 6"; // TRANSLATORS: Tray 7 "media-source.tray-7" = "Tray 7"; // TRANSLATORS: Tray 8 "media-source.tray-8" = "Tray 8"; // TRANSLATORS: Tray 9 "media-source.tray-9" = "Tray 9"; // TRANSLATORS: Media Thickness "media-thickness" = "Media Thickness"; // TRANSLATORS: Media Tooth (Texture) "media-tooth" = "Media Tooth (Texture)"; // TRANSLATORS: Antique "media-tooth.antique" = "Antique"; // TRANSLATORS: Extra Smooth "media-tooth.calendared" = "Extra Smooth"; // TRANSLATORS: Coarse "media-tooth.coarse" = "Coarse"; // TRANSLATORS: Fine "media-tooth.fine" = "Fine"; // TRANSLATORS: Linen "media-tooth.linen" = "Linen"; // TRANSLATORS: Medium "media-tooth.medium" = "Medium"; // TRANSLATORS: Smooth "media-tooth.smooth" = "Smooth"; // TRANSLATORS: Stipple "media-tooth.stipple" = "Stipple"; // TRANSLATORS: Rough "media-tooth.uncalendared" = "Rough"; // TRANSLATORS: Vellum "media-tooth.vellum" = "Vellum"; // TRANSLATORS: Media Top Margin "media-top-margin" = "Media Top Margin"; // TRANSLATORS: Media Type "media-type" = "Media Type"; // TRANSLATORS: Aluminum "media-type.aluminum" = "Aluminum"; // TRANSLATORS: Automatic "media-type.auto" = "Automatic"; // TRANSLATORS: Back Print Film "media-type.back-print-film" = "Back Print Film"; // TRANSLATORS: Cardboard "media-type.cardboard" = "Cardboard"; // TRANSLATORS: Cardstock "media-type.cardstock" = "Cardstock"; // TRANSLATORS: CD "media-type.cd" = "CD"; // TRANSLATORS: Photo Advanced Paper "media-type.com.hp.advanced-photo" = "Photo Advanced Paper"; // TRANSLATORS: Brochure Glossy Paper "media-type.com.hp.brochure-glossy" = "Brochure Glossy Paper"; // TRANSLATORS: Brochure Matte Paper "media-type.com.hp.brochure-matte" = "Brochure Matte Paper"; // TRANSLATORS: Matte Coverstock "media-type.com.hp.cover-matte" = "Matte Coverstock"; // TRANSLATORS: EcoSMART Lite Paper "media-type.com.hp.ecosmart-lite" = "EcoSMART Lite Paper"; // TRANSLATORS: Everyday Glossy Paper "media-type.com.hp.everyday-glossy" = "Everyday Glossy Paper"; // TRANSLATORS: Everyday Matte Paper "media-type.com.hp.everyday-matte" = "Everyday Matte Paper"; // TRANSLATORS: Extra Heavyweight Paper "media-type.com.hp.extra-heavy" = "Extra Heavyweight Paper"; // TRANSLATORS: Intermediate Paper "media-type.com.hp.intermediate" = "Intermediate Paper"; // TRANSLATORS: Mid-Weight Paper "media-type.com.hp.mid-weight" = "Mid-Weight Paper"; // TRANSLATORS: Inkjet Premium Paper "media-type.com.hp.premium-inkjet" = "Inkjet Premium Paper"; // TRANSLATORS: Photo Premium Paper "media-type.com.hp.premium-photo" = "Photo Premium Paper"; // TRANSLATORS: Premium Matte Presentation Paper "media-type.com.hp.premium-presentation-matte" = "Premium Matte Presentation Paper"; // TRANSLATORS: Continuous "media-type.continuous" = "Continuous"; // TRANSLATORS: Continuous Long "media-type.continuous-long" = "Continuous Long"; // TRANSLATORS: Continuous Short "media-type.continuous-short" = "Continuous Short"; // TRANSLATORS: Corrugated Board "media-type.corrugated-board" = "Corrugated Board"; // TRANSLATORS: Optical Disc "media-type.disc" = "Optical Disc"; // TRANSLATORS: Glossy Optical Disc "media-type.disc-glossy" = "Glossy Optical Disc"; // TRANSLATORS: High Gloss Optical Disc "media-type.disc-high-gloss" = "High Gloss Optical Disc"; // TRANSLATORS: Matte Optical Disc "media-type.disc-matte" = "Matte Optical Disc"; // TRANSLATORS: Satin Optical Disc "media-type.disc-satin" = "Satin Optical Disc"; // TRANSLATORS: Semi-Gloss Optical Disc "media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc"; // TRANSLATORS: Double Wall "media-type.double-wall" = "Double Wall"; // TRANSLATORS: Dry Film "media-type.dry-film" = "Dry Film"; // TRANSLATORS: DVD "media-type.dvd" = "DVD"; // TRANSLATORS: Embossing Foil "media-type.embossing-foil" = "Embossing Foil"; // TRANSLATORS: End Board "media-type.end-board" = "End Board"; // TRANSLATORS: Envelope "media-type.envelope" = "Envelope"; // TRANSLATORS: Archival Envelope "media-type.envelope-archival" = "Archival Envelope"; // TRANSLATORS: Bond Envelope "media-type.envelope-bond" = "Bond Envelope"; // TRANSLATORS: Coated Envelope "media-type.envelope-coated" = "Coated Envelope"; // TRANSLATORS: Cotton Envelope "media-type.envelope-cotton" = "Cotton Envelope"; // TRANSLATORS: Fine Envelope "media-type.envelope-fine" = "Fine Envelope"; // TRANSLATORS: Heavyweight Envelope "media-type.envelope-heavyweight" = "Heavyweight Envelope"; // TRANSLATORS: Inkjet Envelope "media-type.envelope-inkjet" = "Inkjet Envelope"; // TRANSLATORS: Lightweight Envelope "media-type.envelope-lightweight" = "Lightweight Envelope"; // TRANSLATORS: Plain Envelope "media-type.envelope-plain" = "Plain Envelope"; // TRANSLATORS: Preprinted Envelope "media-type.envelope-preprinted" = "Preprinted Envelope"; // TRANSLATORS: Windowed Envelope "media-type.envelope-window" = "Windowed Envelope"; // TRANSLATORS: Fabric "media-type.fabric" = "Fabric"; // TRANSLATORS: Archival Fabric "media-type.fabric-archival" = "Archival Fabric"; // TRANSLATORS: Glossy Fabric "media-type.fabric-glossy" = "Glossy Fabric"; // TRANSLATORS: High Gloss Fabric "media-type.fabric-high-gloss" = "High Gloss Fabric"; // TRANSLATORS: Matte Fabric "media-type.fabric-matte" = "Matte Fabric"; // TRANSLATORS: Semi-Gloss Fabric "media-type.fabric-semi-gloss" = "Semi-Gloss Fabric"; // TRANSLATORS: Waterproof Fabric "media-type.fabric-waterproof" = "Waterproof Fabric"; // TRANSLATORS: Film "media-type.film" = "Film"; // TRANSLATORS: Flexo Base "media-type.flexo-base" = "Flexo Base"; // TRANSLATORS: Flexo Photo Polymer "media-type.flexo-photo-polymer" = "Flexo Photo Polymer"; // TRANSLATORS: Flute "media-type.flute" = "Flute"; // TRANSLATORS: Foil "media-type.foil" = "Foil"; // TRANSLATORS: Full Cut Tabs "media-type.full-cut-tabs" = "Full Cut Tabs"; // TRANSLATORS: Glass "media-type.glass" = "Glass"; // TRANSLATORS: Glass Colored "media-type.glass-colored" = "Glass Colored"; // TRANSLATORS: Glass Opaque "media-type.glass-opaque" = "Glass Opaque"; // TRANSLATORS: Glass Surfaced "media-type.glass-surfaced" = "Glass Surfaced"; // TRANSLATORS: Glass Textured "media-type.glass-textured" = "Glass Textured"; // TRANSLATORS: Gravure Cylinder "media-type.gravure-cylinder" = "Gravure Cylinder"; // TRANSLATORS: Image Setter Paper "media-type.image-setter-paper" = "Image Setter Paper"; // TRANSLATORS: Imaging Cylinder "media-type.imaging-cylinder" = "Imaging Cylinder"; // TRANSLATORS: Photo Paper Plus Glossy II "media-type.jp.co.canon-photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II"; // TRANSLATORS: Photo Paper Pro Platinum "media-type.jp.co.canon-photo-paper-pro-platinum" = "Photo Paper Pro Platinum"; // TRANSLATORS: Photo Paper Plus Glossy II "media-type.jp.co.canon_photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II"; // TRANSLATORS: Photo Paper Pro Platinum "media-type.jp.co.canon_photo-paper-pro-platinum" = "Photo Paper Pro Platinum"; // TRANSLATORS: Labels "media-type.labels" = "Labels"; // TRANSLATORS: Colored Labels "media-type.labels-colored" = "Colored Labels"; // TRANSLATORS: Glossy Labels "media-type.labels-glossy" = "Glossy Labels"; // TRANSLATORS: High Gloss Labels "media-type.labels-high-gloss" = "High Gloss Labels"; // TRANSLATORS: Inkjet Labels "media-type.labels-inkjet" = "Inkjet Labels"; // TRANSLATORS: Matte Labels "media-type.labels-matte" = "Matte Labels"; // TRANSLATORS: Permanent Labels "media-type.labels-permanent" = "Permanent Labels"; // TRANSLATORS: Satin Labels "media-type.labels-satin" = "Satin Labels"; // TRANSLATORS: Security Labels "media-type.labels-security" = "Security Labels"; // TRANSLATORS: Semi-Gloss Labels "media-type.labels-semi-gloss" = "Semi-Gloss Labels"; // TRANSLATORS: Laminating Foil "media-type.laminating-foil" = "Laminating Foil"; // TRANSLATORS: Letterhead "media-type.letterhead" = "Letterhead"; // TRANSLATORS: Metal "media-type.metal" = "Metal"; // TRANSLATORS: Metal Glossy "media-type.metal-glossy" = "Metal Glossy"; // TRANSLATORS: Metal High Gloss "media-type.metal-high-gloss" = "Metal High Gloss"; // TRANSLATORS: Metal Matte "media-type.metal-matte" = "Metal Matte"; // TRANSLATORS: Metal Satin "media-type.metal-satin" = "Metal Satin"; // TRANSLATORS: Metal Semi Gloss "media-type.metal-semi-gloss" = "Metal Semi Gloss"; // TRANSLATORS: Mounting Tape "media-type.mounting-tape" = "Mounting Tape"; // TRANSLATORS: Multi Layer "media-type.multi-layer" = "Multi Layer"; // TRANSLATORS: Multi Part Form "media-type.multi-part-form" = "Multi Part Form"; // TRANSLATORS: Other "media-type.other" = "Other"; // TRANSLATORS: Paper "media-type.paper" = "Paper"; // TRANSLATORS: Photo Paper "media-type.photographic" = "Photo Paper"; // TRANSLATORS: Photographic Archival "media-type.photographic-archival" = "Photographic Archival"; // TRANSLATORS: Photo Film "media-type.photographic-film" = "Photo Film"; // TRANSLATORS: Glossy Photo Paper "media-type.photographic-glossy" = "Glossy Photo Paper"; // TRANSLATORS: High Gloss Photo Paper "media-type.photographic-high-gloss" = "High Gloss Photo Paper"; // TRANSLATORS: Matte Photo Paper "media-type.photographic-matte" = "Matte Photo Paper"; // TRANSLATORS: Satin Photo Paper "media-type.photographic-satin" = "Satin Photo Paper"; // TRANSLATORS: Semi-Gloss Photo Paper "media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper"; // TRANSLATORS: Plastic "media-type.plastic" = "Plastic"; // TRANSLATORS: Plastic Archival "media-type.plastic-archival" = "Plastic Archival"; // TRANSLATORS: Plastic Colored "media-type.plastic-colored" = "Plastic Colored"; // TRANSLATORS: Plastic Glossy "media-type.plastic-glossy" = "Plastic Glossy"; // TRANSLATORS: Plastic High Gloss "media-type.plastic-high-gloss" = "Plastic High Gloss"; // TRANSLATORS: Plastic Matte "media-type.plastic-matte" = "Plastic Matte"; // TRANSLATORS: Plastic Satin "media-type.plastic-satin" = "Plastic Satin"; // TRANSLATORS: Plastic Semi Gloss "media-type.plastic-semi-gloss" = "Plastic Semi Gloss"; // TRANSLATORS: Plate "media-type.plate" = "Plate"; // TRANSLATORS: Polyester "media-type.polyester" = "Polyester"; // TRANSLATORS: Pre Cut Tabs "media-type.pre-cut-tabs" = "Pre Cut Tabs"; // TRANSLATORS: Roll "media-type.roll" = "Roll"; // TRANSLATORS: Screen "media-type.screen" = "Screen"; // TRANSLATORS: Screen Paged "media-type.screen-paged" = "Screen Paged"; // TRANSLATORS: Self Adhesive "media-type.self-adhesive" = "Self Adhesive"; // TRANSLATORS: Self Adhesive Film "media-type.self-adhesive-film" = "Self Adhesive Film"; // TRANSLATORS: Shrink Foil "media-type.shrink-foil" = "Shrink Foil"; // TRANSLATORS: Single Face "media-type.single-face" = "Single Face"; // TRANSLATORS: Single Wall "media-type.single-wall" = "Single Wall"; // TRANSLATORS: Sleeve "media-type.sleeve" = "Sleeve"; // TRANSLATORS: Stationery "media-type.stationery" = "Stationery"; // TRANSLATORS: Stationery Archival "media-type.stationery-archival" = "Stationery Archival"; // TRANSLATORS: Coated Paper "media-type.stationery-coated" = "Coated Paper"; // TRANSLATORS: Stationery Cotton "media-type.stationery-cotton" = "Stationery Cotton"; // TRANSLATORS: Vellum Paper "media-type.stationery-fine" = "Vellum Paper"; // TRANSLATORS: Heavyweight Paper "media-type.stationery-heavyweight" = "Heavyweight Paper"; // TRANSLATORS: Stationery Heavyweight Coated "media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated"; // TRANSLATORS: Stationery Inkjet Paper "media-type.stationery-inkjet" = "Stationery Inkjet Paper"; // TRANSLATORS: Letterhead "media-type.stationery-letterhead" = "Letterhead"; // TRANSLATORS: Lightweight Paper "media-type.stationery-lightweight" = "Lightweight Paper"; // TRANSLATORS: Preprinted Paper "media-type.stationery-preprinted" = "Preprinted Paper"; // TRANSLATORS: Punched Paper "media-type.stationery-prepunched" = "Punched Paper"; // TRANSLATORS: Tab Stock "media-type.tab-stock" = "Tab Stock"; // TRANSLATORS: Tractor "media-type.tractor" = "Tractor"; // TRANSLATORS: Transfer "media-type.transfer" = "Transfer"; // TRANSLATORS: Transparency "media-type.transparency" = "Transparency"; // TRANSLATORS: Triple Wall "media-type.triple-wall" = "Triple Wall"; // TRANSLATORS: Wet Film "media-type.wet-film" = "Wet Film"; // TRANSLATORS: Media Weight (grams per m²) "media-weight-metric" = "Media Weight (grams per m²)"; // TRANSLATORS: 28 x 40″ "media.asme_f_28x40in" = "28 x 40″"; // TRANSLATORS: A4 or US Letter "media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter"; // TRANSLATORS: 2a0 "media.iso_2a0_1189x1682mm" = "2a0"; // TRANSLATORS: A0 "media.iso_a0_841x1189mm" = "A0"; // TRANSLATORS: A0x3 "media.iso_a0x3_1189x2523mm" = "A0x3"; // TRANSLATORS: A10 "media.iso_a10_26x37mm" = "A10"; // TRANSLATORS: A1 "media.iso_a1_594x841mm" = "A1"; // TRANSLATORS: A1x3 "media.iso_a1x3_841x1783mm" = "A1x3"; // TRANSLATORS: A1x4 "media.iso_a1x4_841x2378mm" = "A1x4"; // TRANSLATORS: A2 "media.iso_a2_420x594mm" = "A2"; // TRANSLATORS: A2x3 "media.iso_a2x3_594x1261mm" = "A2x3"; // TRANSLATORS: A2x4 "media.iso_a2x4_594x1682mm" = "A2x4"; // TRANSLATORS: A2x5 "media.iso_a2x5_594x2102mm" = "A2x5"; // TRANSLATORS: A3 (Extra) "media.iso_a3-extra_322x445mm" = "A3 (Extra)"; // TRANSLATORS: A3 "media.iso_a3_297x420mm" = "A3"; // TRANSLATORS: A3x3 "media.iso_a3x3_420x891mm" = "A3x3"; // TRANSLATORS: A3x4 "media.iso_a3x4_420x1189mm" = "A3x4"; // TRANSLATORS: A3x5 "media.iso_a3x5_420x1486mm" = "A3x5"; // TRANSLATORS: A3x6 "media.iso_a3x6_420x1783mm" = "A3x6"; // TRANSLATORS: A3x7 "media.iso_a3x7_420x2080mm" = "A3x7"; // TRANSLATORS: A4 (Extra) "media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)"; // TRANSLATORS: A4 (Tab) "media.iso_a4-tab_225x297mm" = "A4 (Tab)"; // TRANSLATORS: A4 "media.iso_a4_210x297mm" = "A4"; // TRANSLATORS: A4x3 "media.iso_a4x3_297x630mm" = "A4x3"; // TRANSLATORS: A4x4 "media.iso_a4x4_297x841mm" = "A4x4"; // TRANSLATORS: A4x5 "media.iso_a4x5_297x1051mm" = "A4x5"; // TRANSLATORS: A4x6 "media.iso_a4x6_297x1261mm" = "A4x6"; // TRANSLATORS: A4x7 "media.iso_a4x7_297x1471mm" = "A4x7"; // TRANSLATORS: A4x8 "media.iso_a4x8_297x1682mm" = "A4x8"; // TRANSLATORS: A4x9 "media.iso_a4x9_297x1892mm" = "A4x9"; // TRANSLATORS: A5 (Extra) "media.iso_a5-extra_174x235mm" = "A5 (Extra)"; // TRANSLATORS: A5 "media.iso_a5_148x210mm" = "A5"; // TRANSLATORS: A6 "media.iso_a6_105x148mm" = "A6"; // TRANSLATORS: A7 "media.iso_a7_74x105mm" = "A7"; // TRANSLATORS: A8 "media.iso_a8_52x74mm" = "A8"; // TRANSLATORS: A9 "media.iso_a9_37x52mm" = "A9"; // TRANSLATORS: B0 "media.iso_b0_1000x1414mm" = "B0"; // TRANSLATORS: B10 "media.iso_b10_31x44mm" = "B10"; // TRANSLATORS: B1 "media.iso_b1_707x1000mm" = "B1"; // TRANSLATORS: B2 "media.iso_b2_500x707mm" = "B2"; // TRANSLATORS: B3 "media.iso_b3_353x500mm" = "B3"; // TRANSLATORS: B4 "media.iso_b4_250x353mm" = "B4"; // TRANSLATORS: B5 (Extra) "media.iso_b5-extra_201x276mm" = "B5 (Extra)"; // TRANSLATORS: Envelope B5 "media.iso_b5_176x250mm" = "Envelope B5"; // TRANSLATORS: B6 "media.iso_b6_125x176mm" = "B6"; // TRANSLATORS: Envelope B6/C4 "media.iso_b6c4_125x324mm" = "Envelope B6/C4"; // TRANSLATORS: B7 "media.iso_b7_88x125mm" = "B7"; // TRANSLATORS: B8 "media.iso_b8_62x88mm" = "B8"; // TRANSLATORS: B9 "media.iso_b9_44x62mm" = "B9"; // TRANSLATORS: CEnvelope 0 "media.iso_c0_917x1297mm" = "CEnvelope 0"; // TRANSLATORS: CEnvelope 10 "media.iso_c10_28x40mm" = "CEnvelope 10"; // TRANSLATORS: CEnvelope 1 "media.iso_c1_648x917mm" = "CEnvelope 1"; // TRANSLATORS: CEnvelope 2 "media.iso_c2_458x648mm" = "CEnvelope 2"; // TRANSLATORS: CEnvelope 3 "media.iso_c3_324x458mm" = "CEnvelope 3"; // TRANSLATORS: CEnvelope 4 "media.iso_c4_229x324mm" = "CEnvelope 4"; // TRANSLATORS: CEnvelope 5 "media.iso_c5_162x229mm" = "CEnvelope 5"; // TRANSLATORS: CEnvelope 6 "media.iso_c6_114x162mm" = "CEnvelope 6"; // TRANSLATORS: CEnvelope 6c5 "media.iso_c6c5_114x229mm" = "CEnvelope 6c5"; // TRANSLATORS: CEnvelope 7 "media.iso_c7_81x114mm" = "CEnvelope 7"; // TRANSLATORS: CEnvelope 7c6 "media.iso_c7c6_81x162mm" = "CEnvelope 7c6"; // TRANSLATORS: CEnvelope 8 "media.iso_c8_57x81mm" = "CEnvelope 8"; // TRANSLATORS: CEnvelope 9 "media.iso_c9_40x57mm" = "CEnvelope 9"; // TRANSLATORS: Envelope DL "media.iso_dl_110x220mm" = "Envelope DL"; // TRANSLATORS: Id-1 "media.iso_id-1_53.98x85.6mm" = "Id-1"; // TRANSLATORS: Id-3 "media.iso_id-3_88x125mm" = "Id-3"; // TRANSLATORS: ISO RA0 "media.iso_ra0_860x1220mm" = "ISO RA0"; // TRANSLATORS: ISO RA1 "media.iso_ra1_610x860mm" = "ISO RA1"; // TRANSLATORS: ISO RA2 "media.iso_ra2_430x610mm" = "ISO RA2"; // TRANSLATORS: ISO RA3 "media.iso_ra3_305x430mm" = "ISO RA3"; // TRANSLATORS: ISO RA4 "media.iso_ra4_215x305mm" = "ISO RA4"; // TRANSLATORS: ISO SRA0 "media.iso_sra0_900x1280mm" = "ISO SRA0"; // TRANSLATORS: ISO SRA1 "media.iso_sra1_640x900mm" = "ISO SRA1"; // TRANSLATORS: ISO SRA2 "media.iso_sra2_450x640mm" = "ISO SRA2"; // TRANSLATORS: ISO SRA3 "media.iso_sra3_320x450mm" = "ISO SRA3"; // TRANSLATORS: ISO SRA4 "media.iso_sra4_225x320mm" = "ISO SRA4"; // TRANSLATORS: JIS B0 "media.jis_b0_1030x1456mm" = "JIS B0"; // TRANSLATORS: JIS B10 "media.jis_b10_32x45mm" = "JIS B10"; // TRANSLATORS: JIS B1 "media.jis_b1_728x1030mm" = "JIS B1"; // TRANSLATORS: JIS B2 "media.jis_b2_515x728mm" = "JIS B2"; // TRANSLATORS: JIS B3 "media.jis_b3_364x515mm" = "JIS B3"; // TRANSLATORS: JIS B4 "media.jis_b4_257x364mm" = "JIS B4"; // TRANSLATORS: JIS B5 "media.jis_b5_182x257mm" = "JIS B5"; // TRANSLATORS: JIS B6 "media.jis_b6_128x182mm" = "JIS B6"; // TRANSLATORS: JIS B7 "media.jis_b7_91x128mm" = "JIS B7"; // TRANSLATORS: JIS B8 "media.jis_b8_64x91mm" = "JIS B8"; // TRANSLATORS: JIS B9 "media.jis_b9_45x64mm" = "JIS B9"; // TRANSLATORS: JIS Executive "media.jis_exec_216x330mm" = "JIS Executive"; // TRANSLATORS: Envelope Chou 2 "media.jpn_chou2_111.1x146mm" = "Envelope Chou 2"; // TRANSLATORS: Envelope Chou 3 "media.jpn_chou3_120x235mm" = "Envelope Chou 3"; // TRANSLATORS: Envelope Chou 40 "media.jpn_chou40_90x225mm" = "Envelope Chou 40"; // TRANSLATORS: Envelope Chou 4 "media.jpn_chou4_90x205mm" = "Envelope Chou 4"; // TRANSLATORS: Hagaki "media.jpn_hagaki_100x148mm" = "Hagaki"; // TRANSLATORS: Envelope Kahu "media.jpn_kahu_240x322.1mm" = "Envelope Kahu"; // TRANSLATORS: 270 x 382mm "media.jpn_kaku1_270x382mm" = "270 x 382mm"; // TRANSLATORS: Envelope Kahu 2 "media.jpn_kaku2_240x332mm" = "Envelope Kahu 2"; // TRANSLATORS: 216 x 277mm "media.jpn_kaku3_216x277mm" = "216 x 277mm"; // TRANSLATORS: 197 x 267mm "media.jpn_kaku4_197x267mm" = "197 x 267mm"; // TRANSLATORS: 190 x 240mm "media.jpn_kaku5_190x240mm" = "190 x 240mm"; // TRANSLATORS: 142 x 205mm "media.jpn_kaku7_142x205mm" = "142 x 205mm"; // TRANSLATORS: 119 x 197mm "media.jpn_kaku8_119x197mm" = "119 x 197mm"; // TRANSLATORS: Oufuku Reply Postcard "media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard"; // TRANSLATORS: Envelope You 4 "media.jpn_you4_105x235mm" = "Envelope You 4"; // TRANSLATORS: 10 x 11″ "media.na_10x11_10x11in" = "10 x 11″"; // TRANSLATORS: 10 x 13″ "media.na_10x13_10x13in" = "10 x 13″"; // TRANSLATORS: 10 x 14″ "media.na_10x14_10x14in" = "10 x 14″"; // TRANSLATORS: 10 x 15″ "media.na_10x15_10x15in" = "10 x 15″"; // TRANSLATORS: 11 x 12″ "media.na_11x12_11x12in" = "11 x 12″"; // TRANSLATORS: 11 x 15″ "media.na_11x15_11x15in" = "11 x 15″"; // TRANSLATORS: 12 x 19″ "media.na_12x19_12x19in" = "12 x 19″"; // TRANSLATORS: 5 x 7″ "media.na_5x7_5x7in" = "5 x 7″"; // TRANSLATORS: 6 x 9″ "media.na_6x9_6x9in" = "6 x 9″"; // TRANSLATORS: 7 x 9″ "media.na_7x9_7x9in" = "7 x 9″"; // TRANSLATORS: 9 x 11″ "media.na_9x11_9x11in" = "9 x 11″"; // TRANSLATORS: Envelope A2 "media.na_a2_4.375x5.75in" = "Envelope A2"; // TRANSLATORS: 9 x 12″ "media.na_arch-a_9x12in" = "9 x 12″"; // TRANSLATORS: 12 x 18″ "media.na_arch-b_12x18in" = "12 x 18″"; // TRANSLATORS: 18 x 24″ "media.na_arch-c_18x24in" = "18 x 24″"; // TRANSLATORS: 24 x 36″ "media.na_arch-d_24x36in" = "24 x 36″"; // TRANSLATORS: 26 x 38″ "media.na_arch-e2_26x38in" = "26 x 38″"; // TRANSLATORS: 27 x 39″ "media.na_arch-e3_27x39in" = "27 x 39″"; // TRANSLATORS: 36 x 48″ "media.na_arch-e_36x48in" = "36 x 48″"; // TRANSLATORS: 12 x 19.17″ "media.na_b-plus_12x19.17in" = "12 x 19.17″"; // TRANSLATORS: Envelope C5 "media.na_c5_6.5x9.5in" = "Envelope C5"; // TRANSLATORS: 17 x 22″ "media.na_c_17x22in" = "17 x 22″"; // TRANSLATORS: 22 x 34″ "media.na_d_22x34in" = "22 x 34″"; // TRANSLATORS: 34 x 44″ "media.na_e_34x44in" = "34 x 44″"; // TRANSLATORS: 11 x 14″ "media.na_edp_11x14in" = "11 x 14″"; // TRANSLATORS: 12 x 14″ "media.na_eur-edp_12x14in" = "12 x 14″"; // TRANSLATORS: Executive "media.na_executive_7.25x10.5in" = "Executive"; // TRANSLATORS: 44 x 68″ "media.na_f_44x68in" = "44 x 68″"; // TRANSLATORS: European Fanfold "media.na_fanfold-eur_8.5x12in" = "European Fanfold"; // TRANSLATORS: US Fanfold "media.na_fanfold-us_11x14.875in" = "US Fanfold"; // TRANSLATORS: Foolscap "media.na_foolscap_8.5x13in" = "Foolscap"; // TRANSLATORS: 8 x 13″ "media.na_govt-legal_8x13in" = "8 x 13″"; // TRANSLATORS: 8 x 10″ "media.na_govt-letter_8x10in" = "8 x 10″"; // TRANSLATORS: 3 x 5″ "media.na_index-3x5_3x5in" = "3 x 5″"; // TRANSLATORS: 6 x 8″ "media.na_index-4x6-ext_6x8in" = "6 x 8″"; // TRANSLATORS: 4 x 6″ "media.na_index-4x6_4x6in" = "4 x 6″"; // TRANSLATORS: 5 x 8″ "media.na_index-5x8_5x8in" = "5 x 8″"; // TRANSLATORS: Statement "media.na_invoice_5.5x8.5in" = "Statement"; // TRANSLATORS: 11 x 17″ "media.na_ledger_11x17in" = "11 x 17″"; // TRANSLATORS: US Legal (Extra) "media.na_legal-extra_9.5x15in" = "US Legal (Extra)"; // TRANSLATORS: US Legal "media.na_legal_8.5x14in" = "US Legal"; // TRANSLATORS: US Letter (Extra) "media.na_letter-extra_9.5x12in" = "US Letter (Extra)"; // TRANSLATORS: US Letter (Plus) "media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)"; // TRANSLATORS: US Letter "media.na_letter_8.5x11in" = "US Letter"; // TRANSLATORS: Envelope Monarch "media.na_monarch_3.875x7.5in" = "Envelope Monarch"; // TRANSLATORS: Envelope #10 "media.na_number-10_4.125x9.5in" = "Envelope #10"; // TRANSLATORS: Envelope #11 "media.na_number-11_4.5x10.375in" = "Envelope #11"; // TRANSLATORS: Envelope #12 "media.na_number-12_4.75x11in" = "Envelope #12"; // TRANSLATORS: Envelope #14 "media.na_number-14_5x11.5in" = "Envelope #14"; // TRANSLATORS: Envelope #9 "media.na_number-9_3.875x8.875in" = "Envelope #9"; // TRANSLATORS: 8.5 x 13.4″ "media.na_oficio_8.5x13.4in" = "8.5 x 13.4″"; // TRANSLATORS: Envelope Personal "media.na_personal_3.625x6.5in" = "Envelope Personal"; // TRANSLATORS: Quarto "media.na_quarto_8.5x10.83in" = "Quarto"; // TRANSLATORS: 8.94 x 14″ "media.na_super-a_8.94x14in" = "8.94 x 14″"; // TRANSLATORS: 13 x 19″ "media.na_super-b_13x19in" = "13 x 19″"; // TRANSLATORS: 30 x 42″ "media.na_wide-format_30x42in" = "30 x 42″"; // TRANSLATORS: 12 x 16″ "media.oe_12x16_12x16in" = "12 x 16″"; // TRANSLATORS: 14 x 17″ "media.oe_14x17_14x17in" = "14 x 17″"; // TRANSLATORS: 18 x 22″ "media.oe_18x22_18x22in" = "18 x 22″"; // TRANSLATORS: 17 x 24″ "media.oe_a2plus_17x24in" = "17 x 24″"; // TRANSLATORS: 2 x 3.5″ "media.oe_business-card_2x3.5in" = "2 x 3.5″"; // TRANSLATORS: 10 x 12″ "media.oe_photo-10r_10x12in" = "10 x 12″"; // TRANSLATORS: 20 x 24″ "media.oe_photo-20r_20x24in" = "20 x 24″"; // TRANSLATORS: 3.5 x 5″ "media.oe_photo-l_3.5x5in" = "3.5 x 5″"; // TRANSLATORS: 10 x 15″ "media.oe_photo-s10r_10x15in" = "10 x 15″"; // TRANSLATORS: 4 x 4″ "media.oe_square-photo_4x4in" = "4 x 4″"; // TRANSLATORS: 5 x 5″ "media.oe_square-photo_5x5in" = "5 x 5″"; // TRANSLATORS: 184 x 260mm "media.om_16k_184x260mm" = "184 x 260mm"; // TRANSLATORS: 195 x 270mm "media.om_16k_195x270mm" = "195 x 270mm"; // TRANSLATORS: 55 x 85mm "media.om_business-card_55x85mm" = "55 x 85mm"; // TRANSLATORS: 55 x 91mm "media.om_business-card_55x91mm" = "55 x 91mm"; // TRANSLATORS: 54 x 86mm "media.om_card_54x86mm" = "54 x 86mm"; // TRANSLATORS: 275 x 395mm "media.om_dai-pa-kai_275x395mm" = "275 x 395mm"; // TRANSLATORS: 89 x 119mm "media.om_dsc-photo_89x119mm" = "89 x 119mm"; // TRANSLATORS: Folio "media.om_folio-sp_215x315mm" = "Folio"; // TRANSLATORS: Folio (Special) "media.om_folio_210x330mm" = "Folio (Special)"; // TRANSLATORS: Envelope Invitation "media.om_invite_220x220mm" = "Envelope Invitation"; // TRANSLATORS: Envelope Italian "media.om_italian_110x230mm" = "Envelope Italian"; // TRANSLATORS: 198 x 275mm "media.om_juuro-ku-kai_198x275mm" = "198 x 275mm"; // TRANSLATORS: 200 x 300 "media.om_large-photo_200x300" = "200 x 300"; // TRANSLATORS: 130 x 180mm "media.om_medium-photo_130x180mm" = "130 x 180mm"; // TRANSLATORS: 267 x 389mm "media.om_pa-kai_267x389mm" = "267 x 389mm"; // TRANSLATORS: Envelope Postfix "media.om_postfix_114x229mm" = "Envelope Postfix"; // TRANSLATORS: 100 x 150mm "media.om_small-photo_100x150mm" = "100 x 150mm"; // TRANSLATORS: 89 x 89mm "media.om_square-photo_89x89mm" = "89 x 89mm"; // TRANSLATORS: 100 x 200mm "media.om_wide-photo_100x200mm" = "100 x 200mm"; // TRANSLATORS: Envelope Chinese #10 "media.prc_10_324x458mm" = "Envelope Chinese #10"; // TRANSLATORS: Chinese 16k "media.prc_16k_146x215mm" = "Chinese 16k"; // TRANSLATORS: Envelope Chinese #1 "media.prc_1_102x165mm" = "Envelope Chinese #1"; // TRANSLATORS: Envelope Chinese #2 "media.prc_2_102x176mm" = "Envelope Chinese #2"; // TRANSLATORS: Chinese 32k "media.prc_32k_97x151mm" = "Chinese 32k"; // TRANSLATORS: Envelope Chinese #3 "media.prc_3_125x176mm" = "Envelope Chinese #3"; // TRANSLATORS: Envelope Chinese #4 "media.prc_4_110x208mm" = "Envelope Chinese #4"; // TRANSLATORS: Envelope Chinese #5 "media.prc_5_110x220mm" = "Envelope Chinese #5"; // TRANSLATORS: Envelope Chinese #6 "media.prc_6_120x320mm" = "Envelope Chinese #6"; // TRANSLATORS: Envelope Chinese #7 "media.prc_7_160x230mm" = "Envelope Chinese #7"; // TRANSLATORS: Envelope Chinese #8 "media.prc_8_120x309mm" = "Envelope Chinese #8"; // TRANSLATORS: ROC 16k "media.roc_16k_7.75x10.75in" = "ROC 16k"; // TRANSLATORS: ROC 8k "media.roc_8k_10.75x15.5in" = "ROC 8k"; "members of class %s:" = "members of class %s:"; // TRANSLATORS: Multiple Document Handling "multiple-document-handling" = "Multiple Document Handling"; // TRANSLATORS: Separate Documents Collated Copies "multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies"; // TRANSLATORS: Separate Documents Uncollated Copies "multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies"; // TRANSLATORS: Single Document "multiple-document-handling.single-document" = "Single Document"; // TRANSLATORS: Single Document New Sheet "multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet"; // TRANSLATORS: Multiple Object Handling "multiple-object-handling" = "Multiple Object Handling"; // TRANSLATORS: Multiple Object Handling Actual "multiple-object-handling-actual" = "Multiple Object Handling Actual"; // TRANSLATORS: Automatic "multiple-object-handling.auto" = "Automatic"; // TRANSLATORS: Best Fit "multiple-object-handling.best-fit" = "Best Fit"; // TRANSLATORS: Best Quality "multiple-object-handling.best-quality" = "Best Quality"; // TRANSLATORS: Best Speed "multiple-object-handling.best-speed" = "Best Speed"; // TRANSLATORS: One At A Time "multiple-object-handling.one-at-a-time" = "One At A Time"; // TRANSLATORS: On Timeout "multiple-operation-time-out-action" = "On Timeout"; // TRANSLATORS: Abort Job "multiple-operation-time-out-action.abort-job" = "Abort Job"; // TRANSLATORS: Hold Job "multiple-operation-time-out-action.hold-job" = "Hold Job"; // TRANSLATORS: Process Job "multiple-operation-time-out-action.process-job" = "Process Job"; "no entries" = "no entries"; "no system default destination" = "no system default destination"; // TRANSLATORS: Noise Removal "noise-removal" = "Noise Removal"; // TRANSLATORS: Notify Attributes "notify-attributes" = "Notify Attributes"; // TRANSLATORS: Notify Charset "notify-charset" = "Notify Charset"; // TRANSLATORS: Notify Events "notify-events" = "Notify Events"; "notify-events not specified." = "notify-events not specified."; // TRANSLATORS: Document Completed "notify-events.document-completed" = "Document Completed"; // TRANSLATORS: Document Config Changed "notify-events.document-config-changed" = "Document Config Changed"; // TRANSLATORS: Document Created "notify-events.document-created" = "Document Created"; // TRANSLATORS: Document Fetchable "notify-events.document-fetchable" = "Document Fetchable"; // TRANSLATORS: Document State Changed "notify-events.document-state-changed" = "Document State Changed"; // TRANSLATORS: Document Stopped "notify-events.document-stopped" = "Document Stopped"; // TRANSLATORS: Job Completed "notify-events.job-completed" = "Job Completed"; // TRANSLATORS: Job Config Changed "notify-events.job-config-changed" = "Job Config Changed"; // TRANSLATORS: Job Created "notify-events.job-created" = "Job Created"; // TRANSLATORS: Job Fetchable "notify-events.job-fetchable" = "Job Fetchable"; // TRANSLATORS: Job Progress "notify-events.job-progress" = "Job Progress"; // TRANSLATORS: Job State Changed "notify-events.job-state-changed" = "Job State Changed"; // TRANSLATORS: Job Stopped "notify-events.job-stopped" = "Job Stopped"; // TRANSLATORS: None "notify-events.none" = "None"; // TRANSLATORS: Printer Config Changed "notify-events.printer-config-changed" = "Printer Config Changed"; // TRANSLATORS: Printer Finishings Changed "notify-events.printer-finishings-changed" = "Printer Finishings Changed"; // TRANSLATORS: Printer Media Changed "notify-events.printer-media-changed" = "Printer Media Changed"; // TRANSLATORS: Printer Queue Order Changed "notify-events.printer-queue-order-changed" = "Printer Queue Order Changed"; // TRANSLATORS: Printer Restarted "notify-events.printer-restarted" = "Printer Restarted"; // TRANSLATORS: Printer Shutdown "notify-events.printer-shutdown" = "Printer Shutdown"; // TRANSLATORS: Printer State Changed "notify-events.printer-state-changed" = "Printer State Changed"; // TRANSLATORS: Printer Stopped "notify-events.printer-stopped" = "Printer Stopped"; // TRANSLATORS: Notify Get Interval "notify-get-interval" = "Notify Get Interval"; // TRANSLATORS: Notify Lease Duration "notify-lease-duration" = "Notify Lease Duration"; // TRANSLATORS: Notify Natural Language "notify-natural-language" = "Notify Natural Language"; // TRANSLATORS: Notify Pull Method "notify-pull-method" = "Notify Pull Method"; // TRANSLATORS: Notify Recipient "notify-recipient-uri" = "Notify Recipient"; "notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used."; "notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI \"%s\" uses unknown scheme."; // TRANSLATORS: Notify Sequence Numbers "notify-sequence-numbers" = "Notify Sequence Numbers"; // TRANSLATORS: Notify Subscription Ids "notify-subscription-ids" = "Notify Subscription Ids"; // TRANSLATORS: Notify Time Interval "notify-time-interval" = "Notify Time Interval"; // TRANSLATORS: Notify User Data "notify-user-data" = "Notify User Data"; // TRANSLATORS: Notify Wait "notify-wait" = "Notify Wait"; // TRANSLATORS: Number Of Retries "number-of-retries" = "Number Of Retries"; // TRANSLATORS: Number-Up "number-up" = "Number-Up"; // TRANSLATORS: Object Offset "object-offset" = "Object Offset"; // TRANSLATORS: Object Size "object-size" = "Object Size"; // TRANSLATORS: Organization Name "organization-name" = "Organization Name"; // TRANSLATORS: Orientation "orientation-requested" = "Orientation"; // TRANSLATORS: Portrait "orientation-requested.3" = "Portrait"; // TRANSLATORS: Landscape "orientation-requested.4" = "Landscape"; // TRANSLATORS: Reverse Landscape "orientation-requested.5" = "Reverse Landscape"; // TRANSLATORS: Reverse Portrait "orientation-requested.6" = "Reverse Portrait"; // TRANSLATORS: None "orientation-requested.7" = "None"; // TRANSLATORS: Scanned Image Options "output-attributes" = "Scanned Image Options"; // TRANSLATORS: Output Tray "output-bin" = "Output Tray"; // TRANSLATORS: Automatic "output-bin.auto" = "Automatic"; // TRANSLATORS: Bottom "output-bin.bottom" = "Bottom"; // TRANSLATORS: Center "output-bin.center" = "Center"; // TRANSLATORS: Face Down "output-bin.face-down" = "Face Down"; // TRANSLATORS: Face Up "output-bin.face-up" = "Face Up"; // TRANSLATORS: Large Capacity "output-bin.large-capacity" = "Large Capacity"; // TRANSLATORS: Left "output-bin.left" = "Left"; // TRANSLATORS: Mailbox 1 "output-bin.mailbox-1" = "Mailbox 1"; // TRANSLATORS: Mailbox 10 "output-bin.mailbox-10" = "Mailbox 10"; // TRANSLATORS: Mailbox 2 "output-bin.mailbox-2" = "Mailbox 2"; // TRANSLATORS: Mailbox 3 "output-bin.mailbox-3" = "Mailbox 3"; // TRANSLATORS: Mailbox 4 "output-bin.mailbox-4" = "Mailbox 4"; // TRANSLATORS: Mailbox 5 "output-bin.mailbox-5" = "Mailbox 5"; // TRANSLATORS: Mailbox 6 "output-bin.mailbox-6" = "Mailbox 6"; // TRANSLATORS: Mailbox 7 "output-bin.mailbox-7" = "Mailbox 7"; // TRANSLATORS: Mailbox 8 "output-bin.mailbox-8" = "Mailbox 8"; // TRANSLATORS: Mailbox 9 "output-bin.mailbox-9" = "Mailbox 9"; // TRANSLATORS: Middle "output-bin.middle" = "Middle"; // TRANSLATORS: My Mailbox "output-bin.my-mailbox" = "My Mailbox"; // TRANSLATORS: Rear "output-bin.rear" = "Rear"; // TRANSLATORS: Right "output-bin.right" = "Right"; // TRANSLATORS: Side "output-bin.side" = "Side"; // TRANSLATORS: Stacker 1 "output-bin.stacker-1" = "Stacker 1"; // TRANSLATORS: Stacker 10 "output-bin.stacker-10" = "Stacker 10"; // TRANSLATORS: Stacker 2 "output-bin.stacker-2" = "Stacker 2"; // TRANSLATORS: Stacker 3 "output-bin.stacker-3" = "Stacker 3"; // TRANSLATORS: Stacker 4 "output-bin.stacker-4" = "Stacker 4"; // TRANSLATORS: Stacker 5 "output-bin.stacker-5" = "Stacker 5"; // TRANSLATORS: Stacker 6 "output-bin.stacker-6" = "Stacker 6"; // TRANSLATORS: Stacker 7 "output-bin.stacker-7" = "Stacker 7"; // TRANSLATORS: Stacker 8 "output-bin.stacker-8" = "Stacker 8"; // TRANSLATORS: Stacker 9 "output-bin.stacker-9" = "Stacker 9"; // TRANSLATORS: Top "output-bin.top" = "Top"; // TRANSLATORS: Tray 1 "output-bin.tray-1" = "Tray 1"; // TRANSLATORS: Tray 10 "output-bin.tray-10" = "Tray 10"; // TRANSLATORS: Tray 2 "output-bin.tray-2" = "Tray 2"; // TRANSLATORS: Tray 3 "output-bin.tray-3" = "Tray 3"; // TRANSLATORS: Tray 4 "output-bin.tray-4" = "Tray 4"; // TRANSLATORS: Tray 5 "output-bin.tray-5" = "Tray 5"; // TRANSLATORS: Tray 6 "output-bin.tray-6" = "Tray 6"; // TRANSLATORS: Tray 7 "output-bin.tray-7" = "Tray 7"; // TRANSLATORS: Tray 8 "output-bin.tray-8" = "Tray 8"; // TRANSLATORS: Tray 9 "output-bin.tray-9" = "Tray 9"; // TRANSLATORS: Scanned Image Quality "output-compression-quality-factor" = "Scanned Image Quality"; // TRANSLATORS: Page Delivery "page-delivery" = "Page Delivery"; // TRANSLATORS: Reverse Order Face-down "page-delivery.reverse-order-face-down" = "Reverse Order Face-down"; // TRANSLATORS: Reverse Order Face-up "page-delivery.reverse-order-face-up" = "Reverse Order Face-up"; // TRANSLATORS: Same Order Face-down "page-delivery.same-order-face-down" = "Same Order Face-down"; // TRANSLATORS: Same Order Face-up "page-delivery.same-order-face-up" = "Same Order Face-up"; // TRANSLATORS: System Specified "page-delivery.system-specified" = "System Specified"; // TRANSLATORS: Page Order Received "page-order-received" = "Page Order Received"; // TRANSLATORS: 1 To N "page-order-received.1-to-n-order" = "1 To N"; // TRANSLATORS: N To 1 "page-order-received.n-to-1-order" = "N To 1"; // TRANSLATORS: Page Ranges "page-ranges" = "Page Ranges"; // TRANSLATORS: Pages "pages" = "Pages"; // TRANSLATORS: Pages Per Subset "pages-per-subset" = "Pages Per Subset"; // TRANSLATORS: Pclm Raster Back Side "pclm-raster-back-side" = "Pclm Raster Back Side"; // TRANSLATORS: Flipped "pclm-raster-back-side.flipped" = "Flipped"; // TRANSLATORS: Normal "pclm-raster-back-side.normal" = "Normal"; // TRANSLATORS: Rotated "pclm-raster-back-side.rotated" = "Rotated"; // TRANSLATORS: Pclm Source Resolution "pclm-source-resolution" = "Pclm Source Resolution"; "pending" = "pending"; // TRANSLATORS: Platform Shape "platform-shape" = "Platform Shape"; // TRANSLATORS: Round "platform-shape.ellipse" = "Round"; // TRANSLATORS: Rectangle "platform-shape.rectangle" = "Rectangle"; // TRANSLATORS: Platform Temperature "platform-temperature" = "Platform Temperature"; // TRANSLATORS: Post-dial String "post-dial-string" = "Post-dial String"; "ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”."; "ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s."; "ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s."; "ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s"; "ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s."; "ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s."; "ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s."; "ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option."; "ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s."; "ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s."; "ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s."; "ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s."; "ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s."; "ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s."; "ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s."; "ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s."; "ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s."; "ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s."; "ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s."; "ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s."; "ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s."; "ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s."; "ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s."; "ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s."; "ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s."; "ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s."; "ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s."; "ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s."; "ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s."; "ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s."; "ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s."; "ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s."; "ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s."; "ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s."; "ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s."; "ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s."; "ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s."; "ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s."; "ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s."; "ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s."; "ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s."; "ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s."; "ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s."; "ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s."; "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s."; "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s."; "ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s."; "ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s."; "ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s."; "ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s."; "ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s."; "ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s."; "ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s."; "ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”."; "ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s."; "ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s."; "ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s."; "ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s."; "ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s."; "ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”."; "ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”."; "ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”."; "ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”."; "ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s."; "ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s."; "ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s."; "ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s."; "ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s."; "ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s."; "ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s."; "ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s."; "ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s"; "ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s"; "ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s"; "ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s."; "ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s."; "ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s"; "ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s"; "ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s"; "ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s."; "ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s."; "ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s."; "ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s."; "ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s."; "ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”."; "ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s."; "ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s."; "ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s."; "ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”."; "ppdc: Writing %s." = "ppdc: Writing %s."; "ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”."; "ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s."; "ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s."; "ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s"; // TRANSLATORS: Pre-dial String "pre-dial-string" = "Pre-dial String"; // TRANSLATORS: Number-Up Layout "presentation-direction-number-up" = "Number-Up Layout"; // TRANSLATORS: Top-bottom, Right-left "presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left"; // TRANSLATORS: Top-bottom, Left-right "presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right"; // TRANSLATORS: Right-left, Top-bottom "presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom"; // TRANSLATORS: Right-left, Bottom-top "presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top"; // TRANSLATORS: Left-right, Top-bottom "presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom"; // TRANSLATORS: Left-right, Bottom-top "presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top"; // TRANSLATORS: Bottom-top, Right-left "presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left"; // TRANSLATORS: Bottom-top, Left-right "presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right"; // TRANSLATORS: Print Accuracy "print-accuracy" = "Print Accuracy"; // TRANSLATORS: Print Base "print-base" = "Print Base"; // TRANSLATORS: Print Base Actual "print-base-actual" = "Print Base Actual"; // TRANSLATORS: Brim "print-base.brim" = "Brim"; // TRANSLATORS: None "print-base.none" = "None"; // TRANSLATORS: Raft "print-base.raft" = "Raft"; // TRANSLATORS: Skirt "print-base.skirt" = "Skirt"; // TRANSLATORS: Standard "print-base.standard" = "Standard"; // TRANSLATORS: Print Color Mode "print-color-mode" = "Print Color Mode"; // TRANSLATORS: Automatic "print-color-mode.auto" = "Automatic"; // TRANSLATORS: Auto Monochrome "print-color-mode.auto-monochrome" = "Auto Monochrome"; // TRANSLATORS: Text "print-color-mode.bi-level" = "Text"; // TRANSLATORS: Color "print-color-mode.color" = "Color"; // TRANSLATORS: Highlight "print-color-mode.highlight" = "Highlight"; // TRANSLATORS: Monochrome "print-color-mode.monochrome" = "Monochrome"; // TRANSLATORS: Process Text "print-color-mode.process-bi-level" = "Process Text"; // TRANSLATORS: Process Monochrome "print-color-mode.process-monochrome" = "Process Monochrome"; // TRANSLATORS: Print Optimization "print-content-optimize" = "Print Optimization"; // TRANSLATORS: Print Content Optimize Actual "print-content-optimize-actual" = "Print Optimization"; // TRANSLATORS: Automatic "print-content-optimize.auto" = "Automatic"; // TRANSLATORS: Graphics "print-content-optimize.graphic" = "Graphics"; // TRANSLATORS: Graphics "print-content-optimize.graphics" = "Graphics"; // TRANSLATORS: Photo "print-content-optimize.photo" = "Photo"; // TRANSLATORS: Text "print-content-optimize.text" = "Text"; // TRANSLATORS: Text and Graphics "print-content-optimize.text-and-graphic" = "Text and Graphics"; // TRANSLATORS: Text And Graphics "print-content-optimize.text-and-graphics" = "Text and Graphics"; // TRANSLATORS: Print Objects "print-objects" = "Print Objects"; // TRANSLATORS: Print Quality "print-quality" = "Print Quality"; // TRANSLATORS: Draft "print-quality.3" = "Draft"; // TRANSLATORS: Normal "print-quality.4" = "Normal"; // TRANSLATORS: High "print-quality.5" = "High"; // TRANSLATORS: Print Rendering Intent "print-rendering-intent" = "Print Rendering Intent"; // TRANSLATORS: Absolute "print-rendering-intent.absolute" = "Absolute"; // TRANSLATORS: Automatic "print-rendering-intent.auto" = "Automatic"; // TRANSLATORS: Perceptual "print-rendering-intent.perceptual" = "Perceptual"; // TRANSLATORS: Relative "print-rendering-intent.relative" = "Relative"; // TRANSLATORS: Relative w/Black Point Compensation "print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation"; // TRANSLATORS: Saturation "print-rendering-intent.saturation" = "Saturation"; // TRANSLATORS: Print Scaling "print-scaling" = "Print Scaling"; // TRANSLATORS: Automatic "print-scaling.auto" = "Automatic"; // TRANSLATORS: Auto-fit "print-scaling.auto-fit" = "Auto-fit"; // TRANSLATORS: Fill "print-scaling.fill" = "Fill"; // TRANSLATORS: Fit "print-scaling.fit" = "Fit"; // TRANSLATORS: None "print-scaling.none" = "None"; // TRANSLATORS: Print Supports "print-supports" = "Print Supports"; // TRANSLATORS: Print Supports Actual "print-supports-actual" = "Print Supports Actual"; // TRANSLATORS: With Specified Material "print-supports.material" = "With Specified Material"; // TRANSLATORS: None "print-supports.none" = "None"; // TRANSLATORS: Standard "print-supports.standard" = "Standard"; "printer %s disabled since %s -" = "printer %s disabled since %s -"; "printer %s is holding new jobs. enabled since %s" = "printer %s is holding new jobs. enabled since %s"; "printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s"; "printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s"; "printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -"; "printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s"; "printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s"; // TRANSLATORS: Printer Kind "printer-kind" = "Printer Kind"; // TRANSLATORS: Disc "printer-kind.disc" = "Disc"; // TRANSLATORS: Document "printer-kind.document" = "Document"; // TRANSLATORS: Envelope "printer-kind.envelope" = "Envelope"; // TRANSLATORS: Label "printer-kind.label" = "Label"; // TRANSLATORS: Large Format "printer-kind.large-format" = "Large format"; // TRANSLATORS: Photo "printer-kind.photo" = "Photo"; // TRANSLATORS: Postcard "printer-kind.postcard" = "Postcard"; // TRANSLATORS: Receipt "printer-kind.receipt" = "Receipt"; // TRANSLATORS: Roll "printer-kind.roll" = "Roll"; // TRANSLATORS: Message From Operator "printer-message-from-operator" = "Message From Operator"; // TRANSLATORS: Print Resolution "printer-resolution" = "Print Resolution"; // TRANSLATORS: Printer State "printer-state" = "Printer State"; // TRANSLATORS: Detailed Printer State "printer-state-reasons" = "Detailed Printer State"; // TRANSLATORS: Old Alerts Have Been Removed "printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed"; // TRANSLATORS: Bander Added "printer-state-reasons.bander-added" = "Bander Added"; // TRANSLATORS: Bander Almost Empty "printer-state-reasons.bander-almost-empty" = "Bander Almost Empty"; // TRANSLATORS: Bander Almost Full "printer-state-reasons.bander-almost-full" = "Bander Almost Full"; // TRANSLATORS: Bander At Limit "printer-state-reasons.bander-at-limit" = "Bander At Limit"; // TRANSLATORS: Bander Closed "printer-state-reasons.bander-closed" = "Bander Closed"; // TRANSLATORS: Bander Configuration Change "printer-state-reasons.bander-configuration-change" = "Bander Configuration Change"; // TRANSLATORS: Bander Cover Closed "printer-state-reasons.bander-cover-closed" = "Bander Cover Closed"; // TRANSLATORS: Bander Cover Open "printer-state-reasons.bander-cover-open" = "Bander Cover Open"; // TRANSLATORS: Bander Empty "printer-state-reasons.bander-empty" = "Bander Empty"; // TRANSLATORS: Bander Full "printer-state-reasons.bander-full" = "Bander Full"; // TRANSLATORS: Bander Interlock Closed "printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed"; // TRANSLATORS: Bander Interlock Open "printer-state-reasons.bander-interlock-open" = "Bander Interlock Open"; // TRANSLATORS: Bander Jam "printer-state-reasons.bander-jam" = "Bander Jam"; // TRANSLATORS: Bander Life Almost Over "printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over"; // TRANSLATORS: Bander Life Over "printer-state-reasons.bander-life-over" = "Bander Life Over"; // TRANSLATORS: Bander Memory Exhausted "printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted"; // TRANSLATORS: Bander Missing "printer-state-reasons.bander-missing" = "Bander Missing"; // TRANSLATORS: Bander Motor Failure "printer-state-reasons.bander-motor-failure" = "Bander Motor Failure"; // TRANSLATORS: Bander Near Limit "printer-state-reasons.bander-near-limit" = "Bander Near Limit"; // TRANSLATORS: Bander Offline "printer-state-reasons.bander-offline" = "Bander Offline"; // TRANSLATORS: Bander Opened "printer-state-reasons.bander-opened" = "Bander Opened"; // TRANSLATORS: Bander Over Temperature "printer-state-reasons.bander-over-temperature" = "Bander Over Temperature"; // TRANSLATORS: Bander Power Saver "printer-state-reasons.bander-power-saver" = "Bander Power Saver"; // TRANSLATORS: Bander Recoverable Failure "printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure"; // TRANSLATORS: Bander Recoverable Storage "printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage"; // TRANSLATORS: Bander Removed "printer-state-reasons.bander-removed" = "Bander Removed"; // TRANSLATORS: Bander Resource Added "printer-state-reasons.bander-resource-added" = "Bander Resource Added"; // TRANSLATORS: Bander Resource Removed "printer-state-reasons.bander-resource-removed" = "Bander Resource Removed"; // TRANSLATORS: Bander Thermistor Failure "printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure"; // TRANSLATORS: Bander Timing Failure "printer-state-reasons.bander-timing-failure" = "Bander Timing Failure"; // TRANSLATORS: Bander Turned Off "printer-state-reasons.bander-turned-off" = "Bander Turned Off"; // TRANSLATORS: Bander Turned On "printer-state-reasons.bander-turned-on" = "Bander Turned On"; // TRANSLATORS: Bander Under Temperature "printer-state-reasons.bander-under-temperature" = "Bander Under Temperature"; // TRANSLATORS: Bander Unrecoverable Failure "printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure"; // TRANSLATORS: Bander Unrecoverable Storage Error "printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error"; // TRANSLATORS: Bander Warming Up "printer-state-reasons.bander-warming-up" = "Bander Warming Up"; // TRANSLATORS: Binder Added "printer-state-reasons.binder-added" = "Binder Added"; // TRANSLATORS: Binder Almost Empty "printer-state-reasons.binder-almost-empty" = "Binder Almost Empty"; // TRANSLATORS: Binder Almost Full "printer-state-reasons.binder-almost-full" = "Binder Almost Full"; // TRANSLATORS: Binder At Limit "printer-state-reasons.binder-at-limit" = "Binder At Limit"; // TRANSLATORS: Binder Closed "printer-state-reasons.binder-closed" = "Binder Closed"; // TRANSLATORS: Binder Configuration Change "printer-state-reasons.binder-configuration-change" = "Binder Configuration Change"; // TRANSLATORS: Binder Cover Closed "printer-state-reasons.binder-cover-closed" = "Binder Cover Closed"; // TRANSLATORS: Binder Cover Open "printer-state-reasons.binder-cover-open" = "Binder Cover Open"; // TRANSLATORS: Binder Empty "printer-state-reasons.binder-empty" = "Binder Empty"; // TRANSLATORS: Binder Full "printer-state-reasons.binder-full" = "Binder Full"; // TRANSLATORS: Binder Interlock Closed "printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed"; // TRANSLATORS: Binder Interlock Open "printer-state-reasons.binder-interlock-open" = "Binder Interlock Open"; // TRANSLATORS: Binder Jam "printer-state-reasons.binder-jam" = "Binder Jam"; // TRANSLATORS: Binder Life Almost Over "printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over"; // TRANSLATORS: Binder Life Over "printer-state-reasons.binder-life-over" = "Binder Life Over"; // TRANSLATORS: Binder Memory Exhausted "printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted"; // TRANSLATORS: Binder Missing "printer-state-reasons.binder-missing" = "Binder Missing"; // TRANSLATORS: Binder Motor Failure "printer-state-reasons.binder-motor-failure" = "Binder Motor Failure"; // TRANSLATORS: Binder Near Limit "printer-state-reasons.binder-near-limit" = "Binder Near Limit"; // TRANSLATORS: Binder Offline "printer-state-reasons.binder-offline" = "Binder Offline"; // TRANSLATORS: Binder Opened "printer-state-reasons.binder-opened" = "Binder Opened"; // TRANSLATORS: Binder Over Temperature "printer-state-reasons.binder-over-temperature" = "Binder Over Temperature"; // TRANSLATORS: Binder Power Saver "printer-state-reasons.binder-power-saver" = "Binder Power Saver"; // TRANSLATORS: Binder Recoverable Failure "printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure"; // TRANSLATORS: Binder Recoverable Storage "printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage"; // TRANSLATORS: Binder Removed "printer-state-reasons.binder-removed" = "Binder Removed"; // TRANSLATORS: Binder Resource Added "printer-state-reasons.binder-resource-added" = "Binder Resource Added"; // TRANSLATORS: Binder Resource Removed "printer-state-reasons.binder-resource-removed" = "Binder Resource Removed"; // TRANSLATORS: Binder Thermistor Failure "printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure"; // TRANSLATORS: Binder Timing Failure "printer-state-reasons.binder-timing-failure" = "Binder Timing Failure"; // TRANSLATORS: Binder Turned Off "printer-state-reasons.binder-turned-off" = "Binder Turned Off"; // TRANSLATORS: Binder Turned On "printer-state-reasons.binder-turned-on" = "Binder Turned On"; // TRANSLATORS: Binder Under Temperature "printer-state-reasons.binder-under-temperature" = "Binder Under Temperature"; // TRANSLATORS: Binder Unrecoverable Failure "printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure"; // TRANSLATORS: Binder Unrecoverable Storage Error "printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error"; // TRANSLATORS: Binder Warming Up "printer-state-reasons.binder-warming-up" = "Binder Warming Up"; // TRANSLATORS: Camera Failure "printer-state-reasons.camera-failure" = "Camera Failure"; // TRANSLATORS: Chamber Cooling "printer-state-reasons.chamber-cooling" = "Chamber Cooling"; // TRANSLATORS: Chamber Failure "printer-state-reasons.chamber-failure" = "Chamber Failure"; // TRANSLATORS: Chamber Heating "printer-state-reasons.chamber-heating" = "Chamber Heating"; // TRANSLATORS: Chamber Temperature High "printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High"; // TRANSLATORS: Chamber Temperature Low "printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low"; // TRANSLATORS: Cleaner Life Almost Over "printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over"; // TRANSLATORS: Cleaner Life Over "printer-state-reasons.cleaner-life-over" = "Cleaner Life Over"; // TRANSLATORS: Configuration Change "printer-state-reasons.configuration-change" = "Configuration Change"; // TRANSLATORS: Connecting To Device "printer-state-reasons.connecting-to-device" = "Connecting To Device"; // TRANSLATORS: Cover Open "printer-state-reasons.cover-open" = "Cover Open"; // TRANSLATORS: Deactivated "printer-state-reasons.deactivated" = "Deactivated"; // TRANSLATORS: Developer Empty "printer-state-reasons.developer-empty" = "Developer Empty"; // TRANSLATORS: Developer Low "printer-state-reasons.developer-low" = "Developer Low"; // TRANSLATORS: Die Cutter Added "printer-state-reasons.die-cutter-added" = "Die Cutter Added"; // TRANSLATORS: Die Cutter Almost Empty "printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty"; // TRANSLATORS: Die Cutter Almost Full "printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full"; // TRANSLATORS: Die Cutter At Limit "printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit"; // TRANSLATORS: Die Cutter Closed "printer-state-reasons.die-cutter-closed" = "Die Cutter Closed"; // TRANSLATORS: Die Cutter Configuration Change "printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change"; // TRANSLATORS: Die Cutter Cover Closed "printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed"; // TRANSLATORS: Die Cutter Cover Open "printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open"; // TRANSLATORS: Die Cutter Empty "printer-state-reasons.die-cutter-empty" = "Die Cutter Empty"; // TRANSLATORS: Die Cutter Full "printer-state-reasons.die-cutter-full" = "Die Cutter Full"; // TRANSLATORS: Die Cutter Interlock Closed "printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed"; // TRANSLATORS: Die Cutter Interlock Open "printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open"; // TRANSLATORS: Die Cutter Jam "printer-state-reasons.die-cutter-jam" = "Die Cutter Jam"; // TRANSLATORS: Die Cutter Life Almost Over "printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over"; // TRANSLATORS: Die Cutter Life Over "printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over"; // TRANSLATORS: Die Cutter Memory Exhausted "printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted"; // TRANSLATORS: Die Cutter Missing "printer-state-reasons.die-cutter-missing" = "Die Cutter Missing"; // TRANSLATORS: Die Cutter Motor Failure "printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure"; // TRANSLATORS: Die Cutter Near Limit "printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit"; // TRANSLATORS: Die Cutter Offline "printer-state-reasons.die-cutter-offline" = "Die Cutter Offline"; // TRANSLATORS: Die Cutter Opened "printer-state-reasons.die-cutter-opened" = "Die Cutter Opened"; // TRANSLATORS: Die Cutter Over Temperature "printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature"; // TRANSLATORS: Die Cutter Power Saver "printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver"; // TRANSLATORS: Die Cutter Recoverable Failure "printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure"; // TRANSLATORS: Die Cutter Recoverable Storage "printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage"; // TRANSLATORS: Die Cutter Removed "printer-state-reasons.die-cutter-removed" = "Die Cutter Removed"; // TRANSLATORS: Die Cutter Resource Added "printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added"; // TRANSLATORS: Die Cutter Resource Removed "printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed"; // TRANSLATORS: Die Cutter Thermistor Failure "printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure"; // TRANSLATORS: Die Cutter Timing Failure "printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure"; // TRANSLATORS: Die Cutter Turned Off "printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off"; // TRANSLATORS: Die Cutter Turned On "printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On"; // TRANSLATORS: Die Cutter Under Temperature "printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature"; // TRANSLATORS: Die Cutter Unrecoverable Failure "printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure"; // TRANSLATORS: Die Cutter Unrecoverable Storage Error "printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error"; // TRANSLATORS: Die Cutter Warming Up "printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up"; // TRANSLATORS: Door Open "printer-state-reasons.door-open" = "Door Open"; // TRANSLATORS: Extruder Cooling "printer-state-reasons.extruder-cooling" = "Extruder Cooling"; // TRANSLATORS: Extruder Failure "printer-state-reasons.extruder-failure" = "Extruder Failure"; // TRANSLATORS: Extruder Heating "printer-state-reasons.extruder-heating" = "Extruder Heating"; // TRANSLATORS: Extruder Jam "printer-state-reasons.extruder-jam" = "Extruder Jam"; // TRANSLATORS: Extruder Temperature High "printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High"; // TRANSLATORS: Extruder Temperature Low "printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low"; // TRANSLATORS: Fan Failure "printer-state-reasons.fan-failure" = "Fan Failure"; // TRANSLATORS: Fax Modem Life Almost Over "printer-state-reasons.fax-modem-life-almost-over" = "Fax Modem Life Almost Over"; // TRANSLATORS: Fax Modem Life Over "printer-state-reasons.fax-modem-life-over" = "Fax Modem Life Over"; // TRANSLATORS: Fax Modem Missing "printer-state-reasons.fax-modem-missing" = "Fax Modem Missing"; // TRANSLATORS: Fax Modem Turned Off "printer-state-reasons.fax-modem-turned-off" = "Fax Modem Turned Off"; // TRANSLATORS: Fax Modem Turned On "printer-state-reasons.fax-modem-turned-on" = "Fax Modem Turned On"; // TRANSLATORS: Folder Added "printer-state-reasons.folder-added" = "Folder Added"; // TRANSLATORS: Folder Almost Empty "printer-state-reasons.folder-almost-empty" = "Folder Almost Empty"; // TRANSLATORS: Folder Almost Full "printer-state-reasons.folder-almost-full" = "Folder Almost Full"; // TRANSLATORS: Folder At Limit "printer-state-reasons.folder-at-limit" = "Folder At Limit"; // TRANSLATORS: Folder Closed "printer-state-reasons.folder-closed" = "Folder Closed"; // TRANSLATORS: Folder Configuration Change "printer-state-reasons.folder-configuration-change" = "Folder Configuration Change"; // TRANSLATORS: Folder Cover Closed "printer-state-reasons.folder-cover-closed" = "Folder Cover Closed"; // TRANSLATORS: Folder Cover Open "printer-state-reasons.folder-cover-open" = "Folder Cover Open"; // TRANSLATORS: Folder Empty "printer-state-reasons.folder-empty" = "Folder Empty"; // TRANSLATORS: Folder Full "printer-state-reasons.folder-full" = "Folder Full"; // TRANSLATORS: Folder Interlock Closed "printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed"; // TRANSLATORS: Folder Interlock Open "printer-state-reasons.folder-interlock-open" = "Folder Interlock Open"; // TRANSLATORS: Folder Jam "printer-state-reasons.folder-jam" = "Folder Jam"; // TRANSLATORS: Folder Life Almost Over "printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over"; // TRANSLATORS: Folder Life Over "printer-state-reasons.folder-life-over" = "Folder Life Over"; // TRANSLATORS: Folder Memory Exhausted "printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted"; // TRANSLATORS: Folder Missing "printer-state-reasons.folder-missing" = "Folder Missing"; // TRANSLATORS: Folder Motor Failure "printer-state-reasons.folder-motor-failure" = "Folder Motor Failure"; // TRANSLATORS: Folder Near Limit "printer-state-reasons.folder-near-limit" = "Folder Near Limit"; // TRANSLATORS: Folder Offline "printer-state-reasons.folder-offline" = "Folder Offline"; // TRANSLATORS: Folder Opened "printer-state-reasons.folder-opened" = "Folder Opened"; // TRANSLATORS: Folder Over Temperature "printer-state-reasons.folder-over-temperature" = "Folder Over Temperature"; // TRANSLATORS: Folder Power Saver "printer-state-reasons.folder-power-saver" = "Folder Power Saver"; // TRANSLATORS: Folder Recoverable Failure "printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure"; // TRANSLATORS: Folder Recoverable Storage "printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage"; // TRANSLATORS: Folder Removed "printer-state-reasons.folder-removed" = "Folder Removed"; // TRANSLATORS: Folder Resource Added "printer-state-reasons.folder-resource-added" = "Folder Resource Added"; // TRANSLATORS: Folder Resource Removed "printer-state-reasons.folder-resource-removed" = "Folder Resource Removed"; // TRANSLATORS: Folder Thermistor Failure "printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure"; // TRANSLATORS: Folder Timing Failure "printer-state-reasons.folder-timing-failure" = "Folder Timing Failure"; // TRANSLATORS: Folder Turned Off "printer-state-reasons.folder-turned-off" = "Folder Turned Off"; // TRANSLATORS: Folder Turned On "printer-state-reasons.folder-turned-on" = "Folder Turned On"; // TRANSLATORS: Folder Under Temperature "printer-state-reasons.folder-under-temperature" = "Folder Under Temperature"; // TRANSLATORS: Folder Unrecoverable Failure "printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure"; // TRANSLATORS: Folder Unrecoverable Storage Error "printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error"; // TRANSLATORS: Folder Warming Up "printer-state-reasons.folder-warming-up" = "Folder Warming Up"; // TRANSLATORS: Fuser temperature high "printer-state-reasons.fuser-over-temp" = "Fuser Over Temp"; // TRANSLATORS: Fuser temperature low "printer-state-reasons.fuser-under-temp" = "Fuser Under Temp"; // TRANSLATORS: Hold New Jobs "printer-state-reasons.hold-new-jobs" = "Hold New Jobs"; // TRANSLATORS: Identify Printer "printer-state-reasons.identify-printer-requested" = "Identify Printer"; // TRANSLATORS: Imprinter Added "printer-state-reasons.imprinter-added" = "Imprinter Added"; // TRANSLATORS: Imprinter Almost Empty "printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty"; // TRANSLATORS: Imprinter Almost Full "printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full"; // TRANSLATORS: Imprinter At Limit "printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit"; // TRANSLATORS: Imprinter Closed "printer-state-reasons.imprinter-closed" = "Imprinter Closed"; // TRANSLATORS: Imprinter Configuration Change "printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change"; // TRANSLATORS: Imprinter Cover Closed "printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed"; // TRANSLATORS: Imprinter Cover Open "printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open"; // TRANSLATORS: Imprinter Empty "printer-state-reasons.imprinter-empty" = "Imprinter Empty"; // TRANSLATORS: Imprinter Full "printer-state-reasons.imprinter-full" = "Imprinter Full"; // TRANSLATORS: Imprinter Interlock Closed "printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed"; // TRANSLATORS: Imprinter Interlock Open "printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open"; // TRANSLATORS: Imprinter Jam "printer-state-reasons.imprinter-jam" = "Imprinter Jam"; // TRANSLATORS: Imprinter Life Almost Over "printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over"; // TRANSLATORS: Imprinter Life Over "printer-state-reasons.imprinter-life-over" = "Imprinter Life Over"; // TRANSLATORS: Imprinter Memory Exhausted "printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted"; // TRANSLATORS: Imprinter Missing "printer-state-reasons.imprinter-missing" = "Imprinter Missing"; // TRANSLATORS: Imprinter Motor Failure "printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure"; // TRANSLATORS: Imprinter Near Limit "printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit"; // TRANSLATORS: Imprinter Offline "printer-state-reasons.imprinter-offline" = "Imprinter Offline"; // TRANSLATORS: Imprinter Opened "printer-state-reasons.imprinter-opened" = "Imprinter Opened"; // TRANSLATORS: Imprinter Over Temperature "printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature"; // TRANSLATORS: Imprinter Power Saver "printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver"; // TRANSLATORS: Imprinter Recoverable Failure "printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure"; // TRANSLATORS: Imprinter Recoverable Storage "printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage"; // TRANSLATORS: Imprinter Removed "printer-state-reasons.imprinter-removed" = "Imprinter Removed"; // TRANSLATORS: Imprinter Resource Added "printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added"; // TRANSLATORS: Imprinter Resource Removed "printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed"; // TRANSLATORS: Imprinter Thermistor Failure "printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure"; // TRANSLATORS: Imprinter Timing Failure "printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure"; // TRANSLATORS: Imprinter Turned Off "printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off"; // TRANSLATORS: Imprinter Turned On "printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On"; // TRANSLATORS: Imprinter Under Temperature "printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature"; // TRANSLATORS: Imprinter Unrecoverable Failure "printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure"; // TRANSLATORS: Imprinter Unrecoverable Storage Error "printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error"; // TRANSLATORS: Imprinter Warming Up "printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up"; // TRANSLATORS: Input Cannot Feed Size Selected "printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected"; // TRANSLATORS: Input Manual Input Request "printer-state-reasons.input-manual-input-request" = "Input Manual Input Request"; // TRANSLATORS: Input Media Color Change "printer-state-reasons.input-media-color-change" = "Input Media Color Change"; // TRANSLATORS: Input Media Form Parts Change "printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change"; // TRANSLATORS: Input Media Size Change "printer-state-reasons.input-media-size-change" = "Input Media Size Change"; // TRANSLATORS: Input Media Tray Failure "printer-state-reasons.input-media-tray-failure" = "Input Media Tray Failure"; // TRANSLATORS: Input Media Tray Feed Error "printer-state-reasons.input-media-tray-feed-error" = "Input Media Tray Feed Error"; // TRANSLATORS: Input Media Tray Jam "printer-state-reasons.input-media-tray-jam" = "Input Media Tray Jam"; // TRANSLATORS: Input Media Type Change "printer-state-reasons.input-media-type-change" = "Input Media Type Change"; // TRANSLATORS: Input Media Weight Change "printer-state-reasons.input-media-weight-change" = "Input Media Weight Change"; // TRANSLATORS: Input Pick Roller Failure "printer-state-reasons.input-pick-roller-failure" = "Input Pick Roller Failure"; // TRANSLATORS: Input Pick Roller Life Over "printer-state-reasons.input-pick-roller-life-over" = "Input Pick Roller Life Over"; // TRANSLATORS: Input Pick Roller Life Warn "printer-state-reasons.input-pick-roller-life-warn" = "Input Pick Roller Life Warn"; // TRANSLATORS: Input Pick Roller Missing "printer-state-reasons.input-pick-roller-missing" = "Input Pick Roller Missing"; // TRANSLATORS: Input Tray Elevation Failure "printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure"; // TRANSLATORS: Paper tray is missing "printer-state-reasons.input-tray-missing" = "Input Tray Missing"; // TRANSLATORS: Input Tray Position Failure "printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure"; // TRANSLATORS: Inserter Added "printer-state-reasons.inserter-added" = "Inserter Added"; // TRANSLATORS: Inserter Almost Empty "printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty"; // TRANSLATORS: Inserter Almost Full "printer-state-reasons.inserter-almost-full" = "Inserter Almost Full"; // TRANSLATORS: Inserter At Limit "printer-state-reasons.inserter-at-limit" = "Inserter At Limit"; // TRANSLATORS: Inserter Closed "printer-state-reasons.inserter-closed" = "Inserter Closed"; // TRANSLATORS: Inserter Configuration Change "printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change"; // TRANSLATORS: Inserter Cover Closed "printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed"; // TRANSLATORS: Inserter Cover Open "printer-state-reasons.inserter-cover-open" = "Inserter Cover Open"; // TRANSLATORS: Inserter Empty "printer-state-reasons.inserter-empty" = "Inserter Empty"; // TRANSLATORS: Inserter Full "printer-state-reasons.inserter-full" = "Inserter Full"; // TRANSLATORS: Inserter Interlock Closed "printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed"; // TRANSLATORS: Inserter Interlock Open "printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open"; // TRANSLATORS: Inserter Jam "printer-state-reasons.inserter-jam" = "Inserter Jam"; // TRANSLATORS: Inserter Life Almost Over "printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over"; // TRANSLATORS: Inserter Life Over "printer-state-reasons.inserter-life-over" = "Inserter Life Over"; // TRANSLATORS: Inserter Memory Exhausted "printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted"; // TRANSLATORS: Inserter Missing "printer-state-reasons.inserter-missing" = "Inserter Missing"; // TRANSLATORS: Inserter Motor Failure "printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure"; // TRANSLATORS: Inserter Near Limit "printer-state-reasons.inserter-near-limit" = "Inserter Near Limit"; // TRANSLATORS: Inserter Offline "printer-state-reasons.inserter-offline" = "Inserter Offline"; // TRANSLATORS: Inserter Opened "printer-state-reasons.inserter-opened" = "Inserter Opened"; // TRANSLATORS: Inserter Over Temperature "printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature"; // TRANSLATORS: Inserter Power Saver "printer-state-reasons.inserter-power-saver" = "Inserter Power Saver"; // TRANSLATORS: Inserter Recoverable Failure "printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure"; // TRANSLATORS: Inserter Recoverable Storage "printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage"; // TRANSLATORS: Inserter Removed "printer-state-reasons.inserter-removed" = "Inserter Removed"; // TRANSLATORS: Inserter Resource Added "printer-state-reasons.inserter-resource-added" = "Inserter Resource Added"; // TRANSLATORS: Inserter Resource Removed "printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed"; // TRANSLATORS: Inserter Thermistor Failure "printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure"; // TRANSLATORS: Inserter Timing Failure "printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure"; // TRANSLATORS: Inserter Turned Off "printer-state-reasons.inserter-turned-off" = "Inserter Turned Off"; // TRANSLATORS: Inserter Turned On "printer-state-reasons.inserter-turned-on" = "Inserter Turned On"; // TRANSLATORS: Inserter Under Temperature "printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature"; // TRANSLATORS: Inserter Unrecoverable Failure "printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure"; // TRANSLATORS: Inserter Unrecoverable Storage Error "printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error"; // TRANSLATORS: Inserter Warming Up "printer-state-reasons.inserter-warming-up" = "Inserter Warming Up"; // TRANSLATORS: Interlock Closed "printer-state-reasons.interlock-closed" = "Interlock Closed"; // TRANSLATORS: Interlock Open "printer-state-reasons.interlock-open" = "Interlock Open"; // TRANSLATORS: Interpreter Cartridge Added "printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added"; // TRANSLATORS: Interpreter Cartridge Removed "printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed"; // TRANSLATORS: Interpreter Complex Page Encountered "printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered"; // TRANSLATORS: Interpreter Memory Decrease "printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease"; // TRANSLATORS: Interpreter Memory Increase "printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase"; // TRANSLATORS: Interpreter Resource Added "printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added"; // TRANSLATORS: Interpreter Resource Deleted "printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted"; // TRANSLATORS: Printer resource unavailable "printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable"; // TRANSLATORS: Lamp At End of Life "printer-state-reasons.lamp-at-eol" = "Lamp At End of Life"; // TRANSLATORS: Lamp Failure "printer-state-reasons.lamp-failure" = "Lamp Failure"; // TRANSLATORS: Lamp Near End of Life "printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life"; // TRANSLATORS: Laser At End of Life "printer-state-reasons.laser-at-eol" = "Laser At End of Life"; // TRANSLATORS: Laser Failure "printer-state-reasons.laser-failure" = "Laser Failure"; // TRANSLATORS: Laser Near End of Life "printer-state-reasons.laser-near-eol" = "Laser Near End of Life"; // TRANSLATORS: Envelope Maker Added "printer-state-reasons.make-envelope-added" = "Envelope Maker Added"; // TRANSLATORS: Envelope Maker Almost Empty "printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty"; // TRANSLATORS: Envelope Maker Almost Full "printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full"; // TRANSLATORS: Envelope Maker At Limit "printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit"; // TRANSLATORS: Envelope Maker Closed "printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed"; // TRANSLATORS: Envelope Maker Configuration Change "printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change"; // TRANSLATORS: Envelope Maker Cover Closed "printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed"; // TRANSLATORS: Envelope Maker Cover Open "printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open"; // TRANSLATORS: Envelope Maker Empty "printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty"; // TRANSLATORS: Envelope Maker Full "printer-state-reasons.make-envelope-full" = "Envelope Maker Full"; // TRANSLATORS: Envelope Maker Interlock Closed "printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed"; // TRANSLATORS: Envelope Maker Interlock Open "printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open"; // TRANSLATORS: Envelope Maker Jam "printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam"; // TRANSLATORS: Envelope Maker Life Almost Over "printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over"; // TRANSLATORS: Envelope Maker Life Over "printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over"; // TRANSLATORS: Envelope Maker Memory Exhausted "printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted"; // TRANSLATORS: Envelope Maker Missing "printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing"; // TRANSLATORS: Envelope Maker Motor Failure "printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure"; // TRANSLATORS: Envelope Maker Near Limit "printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit"; // TRANSLATORS: Envelope Maker Offline "printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline"; // TRANSLATORS: Envelope Maker Opened "printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened"; // TRANSLATORS: Envelope Maker Over Temperature "printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature"; // TRANSLATORS: Envelope Maker Power Saver "printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver"; // TRANSLATORS: Envelope Maker Recoverable Failure "printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure"; // TRANSLATORS: Envelope Maker Recoverable Storage "printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage"; // TRANSLATORS: Envelope Maker Removed "printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed"; // TRANSLATORS: Envelope Maker Resource Added "printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added"; // TRANSLATORS: Envelope Maker Resource Removed "printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed"; // TRANSLATORS: Envelope Maker Thermistor Failure "printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure"; // TRANSLATORS: Envelope Maker Timing Failure "printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure"; // TRANSLATORS: Envelope Maker Turned Off "printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off"; // TRANSLATORS: Envelope Maker Turned On "printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On"; // TRANSLATORS: Envelope Maker Under Temperature "printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature"; // TRANSLATORS: Envelope Maker Unrecoverable Failure "printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure"; // TRANSLATORS: Envelope Maker Unrecoverable Storage Error "printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error"; // TRANSLATORS: Envelope Maker Warming Up "printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up"; // TRANSLATORS: Marker Adjusting Print Quality "printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality"; // TRANSLATORS: Marker Cleaner Missing "printer-state-reasons.marker-cleaner-missing" = "Marker Cleaner Missing"; // TRANSLATORS: Marker Developer Almost Empty "printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty"; // TRANSLATORS: Marker Developer Empty "printer-state-reasons.marker-developer-empty" = "Marker Developer Empty"; // TRANSLATORS: Marker Developer Missing "printer-state-reasons.marker-developer-missing" = "Marker Developer Missing"; // TRANSLATORS: Marker Fuser Missing "printer-state-reasons.marker-fuser-missing" = "Marker Fuser Missing"; // TRANSLATORS: Marker Fuser Thermistor Failure "printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure"; // TRANSLATORS: Marker Fuser Timing Failure "printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure"; // TRANSLATORS: Marker Ink Almost Empty "printer-state-reasons.marker-ink-almost-empty" = "Low ink"; // TRANSLATORS: Marker Ink Empty "printer-state-reasons.marker-ink-empty" = "Ink empty"; // TRANSLATORS: Marker Ink Missing "printer-state-reasons.marker-ink-missing" = "Ink missing"; // TRANSLATORS: Marker Opc Missing "printer-state-reasons.marker-opc-missing" = "OPC missing"; // TRANSLATORS: Marker Print Ribbon Almost Empty "printer-state-reasons.marker-print-ribbon-almost-empty" = "Print ribbon Almost Empty"; // TRANSLATORS: Marker Print Ribbon Empty "printer-state-reasons.marker-print-ribbon-empty" = "Print ribbon Empty"; // TRANSLATORS: Marker Print Ribbon Missing "printer-state-reasons.marker-print-ribbon-missing" = "Print ribbon missing"; // TRANSLATORS: Marker Supply Almost Empty "printer-state-reasons.marker-supply-almost-empty" = "Ink/toner almost empty"; // TRANSLATORS: Ink/toner empty "printer-state-reasons.marker-supply-empty" = "Ink/toner empty"; // TRANSLATORS: Ink/toner low "printer-state-reasons.marker-supply-low" = "Ink/toner low"; // TRANSLATORS: Marker Supply Missing "printer-state-reasons.marker-supply-missing" = "Ink/toner missing"; // TRANSLATORS: Marker Toner Cartridge Missing "printer-state-reasons.marker-toner-cartridge-missing" = "Toner cartridge missing"; // TRANSLATORS: Marker Toner Missing "printer-state-reasons.marker-toner-missing" = "Toner missing"; // TRANSLATORS: Ink/toner waste bin almost full "printer-state-reasons.marker-waste-almost-full" = "Ink/toner waste bin almost full"; // TRANSLATORS: Ink/toner waste bin full "printer-state-reasons.marker-waste-full" = "Ink/toner waste bin full"; // TRANSLATORS: Marker Waste Ink Receptacle Almost Full "printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full"; // TRANSLATORS: Marker Waste Ink Receptacle Full "printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full"; // TRANSLATORS: Marker Waste Ink Receptacle Missing "printer-state-reasons.marker-waste-ink-receptacle-missing" = "Marker Waste Ink Receptacle Missing"; // TRANSLATORS: Marker Waste Missing "printer-state-reasons.marker-waste-missing" = "Ink/toner waste bin missing"; // TRANSLATORS: Marker Waste Toner Receptacle Almost Full "printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full"; // TRANSLATORS: Marker Waste Toner Receptacle Full "printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full"; // TRANSLATORS: Marker Waste Toner Receptacle Missing "printer-state-reasons.marker-waste-toner-receptacle-missing" = "Marker Waste Toner Receptacle Missing"; // TRANSLATORS: Material Empty "printer-state-reasons.material-empty" = "Material Empty"; // TRANSLATORS: Material Low "printer-state-reasons.material-low" = "Material Low"; // TRANSLATORS: Material Needed "printer-state-reasons.material-needed" = "Material Needed"; // TRANSLATORS: Media Drying "printer-state-reasons.media-drying" = "Media Drying"; // TRANSLATORS: Paper tray is empty "printer-state-reasons.media-empty" = "Media Empty"; // TRANSLATORS: Paper jam "printer-state-reasons.media-jam" = "Media Jam"; // TRANSLATORS: Paper tray is almost empty "printer-state-reasons.media-low" = "Paper tray is almost empty"; // TRANSLATORS: Load paper "printer-state-reasons.media-needed" = "Load paper"; // TRANSLATORS: Media Path Cannot Do 2-Sided Printing "printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing"; // TRANSLATORS: Media Path Failure "printer-state-reasons.media-path-failure" = "Media Path Failure"; // TRANSLATORS: Media Path Input Empty "printer-state-reasons.media-path-input-empty" = "Media Path Input Empty"; // TRANSLATORS: Media Path Input Feed Error "printer-state-reasons.media-path-input-feed-error" = "Media Path Input Feed Error"; // TRANSLATORS: Media Path Input Jam "printer-state-reasons.media-path-input-jam" = "Media Path Input Jam"; // TRANSLATORS: Media Path Input Request "printer-state-reasons.media-path-input-request" = "Media Path Input Request"; // TRANSLATORS: Media Path Jam "printer-state-reasons.media-path-jam" = "Media Path Jam"; // TRANSLATORS: Media Path Media Tray Almost Full "printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full"; // TRANSLATORS: Media Path Media Tray Full "printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full"; // TRANSLATORS: Media Path Media Tray Missing "printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing"; // TRANSLATORS: Media Path Output Feed Error "printer-state-reasons.media-path-output-feed-error" = "Media Path Output Feed Error"; // TRANSLATORS: Media Path Output Full "printer-state-reasons.media-path-output-full" = "Media Path Output Full"; // TRANSLATORS: Media Path Output Jam "printer-state-reasons.media-path-output-jam" = "Media Path Output Jam"; // TRANSLATORS: Media Path Pick Roller Failure "printer-state-reasons.media-path-pick-roller-failure" = "Media Path Pick Roller Failure"; // TRANSLATORS: Media Path Pick Roller Life Over "printer-state-reasons.media-path-pick-roller-life-over" = "Media Path Pick Roller Life Over"; // TRANSLATORS: Media Path Pick Roller Life Warn "printer-state-reasons.media-path-pick-roller-life-warn" = "Media Path Pick Roller Life Warn"; // TRANSLATORS: Media Path Pick Roller Missing "printer-state-reasons.media-path-pick-roller-missing" = "Media Path Pick Roller Missing"; // TRANSLATORS: Motor Failure "printer-state-reasons.motor-failure" = "Motor Failure"; // TRANSLATORS: Printer going offline "printer-state-reasons.moving-to-paused" = "Moving To Paused"; // TRANSLATORS: None "printer-state-reasons.none" = "None"; // TRANSLATORS: Optical Photoconductor Life Over "printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over"; // TRANSLATORS: OPC almost at end-of-life "printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life"; // TRANSLATORS: Check the printer for errors "printer-state-reasons.other" = "Other"; // TRANSLATORS: Output bin is almost full "printer-state-reasons.output-area-almost-full" = "Output Area Almost Full"; // TRANSLATORS: Output bin is full "printer-state-reasons.output-area-full" = "Output Area Full"; // TRANSLATORS: Output Mailbox Select Failure "printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure"; // TRANSLATORS: Output Media Tray Failure "printer-state-reasons.output-media-tray-failure" = "Output Media Tray Failure"; // TRANSLATORS: Output Media Tray Feed Error "printer-state-reasons.output-media-tray-feed-error" = "Output Media Tray Feed Error"; // TRANSLATORS: Output Media Tray Jam "printer-state-reasons.output-media-tray-jam" = "Output Media Tray Jam"; // TRANSLATORS: Output tray is missing "printer-state-reasons.output-tray-missing" = "Output Tray Missing"; // TRANSLATORS: Paused "printer-state-reasons.paused" = "Paused"; // TRANSLATORS: Perforater Added "printer-state-reasons.perforater-added" = "Perforater Added"; // TRANSLATORS: Perforater Almost Empty "printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty"; // TRANSLATORS: Perforater Almost Full "printer-state-reasons.perforater-almost-full" = "Perforater Almost Full"; // TRANSLATORS: Perforater At Limit "printer-state-reasons.perforater-at-limit" = "Perforater At Limit"; // TRANSLATORS: Perforater Closed "printer-state-reasons.perforater-closed" = "Perforater Closed"; // TRANSLATORS: Perforater Configuration Change "printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change"; // TRANSLATORS: Perforater Cover Closed "printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed"; // TRANSLATORS: Perforater Cover Open "printer-state-reasons.perforater-cover-open" = "Perforater Cover Open"; // TRANSLATORS: Perforater Empty "printer-state-reasons.perforater-empty" = "Perforater Empty"; // TRANSLATORS: Perforater Full "printer-state-reasons.perforater-full" = "Perforater Full"; // TRANSLATORS: Perforater Interlock Closed "printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed"; // TRANSLATORS: Perforater Interlock Open "printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open"; // TRANSLATORS: Perforater Jam "printer-state-reasons.perforater-jam" = "Perforater Jam"; // TRANSLATORS: Perforater Life Almost Over "printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over"; // TRANSLATORS: Perforater Life Over "printer-state-reasons.perforater-life-over" = "Perforater Life Over"; // TRANSLATORS: Perforater Memory Exhausted "printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted"; // TRANSLATORS: Perforater Missing "printer-state-reasons.perforater-missing" = "Perforater Missing"; // TRANSLATORS: Perforater Motor Failure "printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure"; // TRANSLATORS: Perforater Near Limit "printer-state-reasons.perforater-near-limit" = "Perforater Near Limit"; // TRANSLATORS: Perforater Offline "printer-state-reasons.perforater-offline" = "Perforater Offline"; // TRANSLATORS: Perforater Opened "printer-state-reasons.perforater-opened" = "Perforater Opened"; // TRANSLATORS: Perforater Over Temperature "printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature"; // TRANSLATORS: Perforater Power Saver "printer-state-reasons.perforater-power-saver" = "Perforater Power Saver"; // TRANSLATORS: Perforater Recoverable Failure "printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure"; // TRANSLATORS: Perforater Recoverable Storage "printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage"; // TRANSLATORS: Perforater Removed "printer-state-reasons.perforater-removed" = "Perforater Removed"; // TRANSLATORS: Perforater Resource Added "printer-state-reasons.perforater-resource-added" = "Perforater Resource Added"; // TRANSLATORS: Perforater Resource Removed "printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed"; // TRANSLATORS: Perforater Thermistor Failure "printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure"; // TRANSLATORS: Perforater Timing Failure "printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure"; // TRANSLATORS: Perforater Turned Off "printer-state-reasons.perforater-turned-off" = "Perforater Turned Off"; // TRANSLATORS: Perforater Turned On "printer-state-reasons.perforater-turned-on" = "Perforater Turned On"; // TRANSLATORS: Perforater Under Temperature "printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature"; // TRANSLATORS: Perforater Unrecoverable Failure "printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure"; // TRANSLATORS: Perforater Unrecoverable Storage Error "printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error"; // TRANSLATORS: Perforater Warming Up "printer-state-reasons.perforater-warming-up" = "Perforater Warming Up"; // TRANSLATORS: Platform Cooling "printer-state-reasons.platform-cooling" = "Platform Cooling"; // TRANSLATORS: Platform Failure "printer-state-reasons.platform-failure" = "Platform Failure"; // TRANSLATORS: Platform Heating "printer-state-reasons.platform-heating" = "Platform Heating"; // TRANSLATORS: Platform Temperature High "printer-state-reasons.platform-temperature-high" = "Platform Temperature High"; // TRANSLATORS: Platform Temperature Low "printer-state-reasons.platform-temperature-low" = "Platform Temperature Low"; // TRANSLATORS: Power Down "printer-state-reasons.power-down" = "Power Down"; // TRANSLATORS: Power Up "printer-state-reasons.power-up" = "Power Up"; // TRANSLATORS: Printer Reset Manually "printer-state-reasons.printer-manual-reset" = "Printer Reset Manually"; // TRANSLATORS: Printer Reset Remotely "printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely"; // TRANSLATORS: Printer Ready To Print "printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print"; // TRANSLATORS: Puncher Added "printer-state-reasons.puncher-added" = "Puncher Added"; // TRANSLATORS: Puncher Almost Empty "printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty"; // TRANSLATORS: Puncher Almost Full "printer-state-reasons.puncher-almost-full" = "Puncher Almost Full"; // TRANSLATORS: Puncher At Limit "printer-state-reasons.puncher-at-limit" = "Puncher At Limit"; // TRANSLATORS: Puncher Closed "printer-state-reasons.puncher-closed" = "Puncher Closed"; // TRANSLATORS: Puncher Configuration Change "printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change"; // TRANSLATORS: Puncher Cover Closed "printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed"; // TRANSLATORS: Puncher Cover Open "printer-state-reasons.puncher-cover-open" = "Puncher Cover Open"; // TRANSLATORS: Puncher Empty "printer-state-reasons.puncher-empty" = "Puncher Empty"; // TRANSLATORS: Puncher Full "printer-state-reasons.puncher-full" = "Puncher Full"; // TRANSLATORS: Puncher Interlock Closed "printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed"; // TRANSLATORS: Puncher Interlock Open "printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open"; // TRANSLATORS: Puncher Jam "printer-state-reasons.puncher-jam" = "Puncher Jam"; // TRANSLATORS: Puncher Life Almost Over "printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over"; // TRANSLATORS: Puncher Life Over "printer-state-reasons.puncher-life-over" = "Puncher Life Over"; // TRANSLATORS: Puncher Memory Exhausted "printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted"; // TRANSLATORS: Puncher Missing "printer-state-reasons.puncher-missing" = "Puncher Missing"; // TRANSLATORS: Puncher Motor Failure "printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure"; // TRANSLATORS: Puncher Near Limit "printer-state-reasons.puncher-near-limit" = "Puncher Near Limit"; // TRANSLATORS: Puncher Offline "printer-state-reasons.puncher-offline" = "Puncher Offline"; // TRANSLATORS: Puncher Opened "printer-state-reasons.puncher-opened" = "Puncher Opened"; // TRANSLATORS: Puncher Over Temperature "printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature"; // TRANSLATORS: Puncher Power Saver "printer-state-reasons.puncher-power-saver" = "Puncher Power Saver"; // TRANSLATORS: Puncher Recoverable Failure "printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure"; // TRANSLATORS: Puncher Recoverable Storage "printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage"; // TRANSLATORS: Puncher Removed "printer-state-reasons.puncher-removed" = "Puncher Removed"; // TRANSLATORS: Puncher Resource Added "printer-state-reasons.puncher-resource-added" = "Puncher Resource Added"; // TRANSLATORS: Puncher Resource Removed "printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed"; // TRANSLATORS: Puncher Thermistor Failure "printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure"; // TRANSLATORS: Puncher Timing Failure "printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure"; // TRANSLATORS: Puncher Turned Off "printer-state-reasons.puncher-turned-off" = "Puncher Turned Off"; // TRANSLATORS: Puncher Turned On "printer-state-reasons.puncher-turned-on" = "Puncher Turned On"; // TRANSLATORS: Puncher Under Temperature "printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature"; // TRANSLATORS: Puncher Unrecoverable Failure "printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure"; // TRANSLATORS: Puncher Unrecoverable Storage Error "printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error"; // TRANSLATORS: Puncher Warming Up "printer-state-reasons.puncher-warming-up" = "Puncher Warming Up"; // TRANSLATORS: Separation Cutter Added "printer-state-reasons.separation-cutter-added" = "Separation Cutter Added"; // TRANSLATORS: Separation Cutter Almost Empty "printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty"; // TRANSLATORS: Separation Cutter Almost Full "printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full"; // TRANSLATORS: Separation Cutter At Limit "printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit"; // TRANSLATORS: Separation Cutter Closed "printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed"; // TRANSLATORS: Separation Cutter Configuration Change "printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change"; // TRANSLATORS: Separation Cutter Cover Closed "printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed"; // TRANSLATORS: Separation Cutter Cover Open "printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open"; // TRANSLATORS: Separation Cutter Empty "printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty"; // TRANSLATORS: Separation Cutter Full "printer-state-reasons.separation-cutter-full" = "Separation Cutter Full"; // TRANSLATORS: Separation Cutter Interlock Closed "printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed"; // TRANSLATORS: Separation Cutter Interlock Open "printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open"; // TRANSLATORS: Separation Cutter Jam "printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam"; // TRANSLATORS: Separation Cutter Life Almost Over "printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over"; // TRANSLATORS: Separation Cutter Life Over "printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over"; // TRANSLATORS: Separation Cutter Memory Exhausted "printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted"; // TRANSLATORS: Separation Cutter Missing "printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing"; // TRANSLATORS: Separation Cutter Motor Failure "printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure"; // TRANSLATORS: Separation Cutter Near Limit "printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit"; // TRANSLATORS: Separation Cutter Offline "printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline"; // TRANSLATORS: Separation Cutter Opened "printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened"; // TRANSLATORS: Separation Cutter Over Temperature "printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature"; // TRANSLATORS: Separation Cutter Power Saver "printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver"; // TRANSLATORS: Separation Cutter Recoverable Failure "printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure"; // TRANSLATORS: Separation Cutter Recoverable Storage "printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage"; // TRANSLATORS: Separation Cutter Removed "printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed"; // TRANSLATORS: Separation Cutter Resource Added "printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added"; // TRANSLATORS: Separation Cutter Resource Removed "printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed"; // TRANSLATORS: Separation Cutter Thermistor Failure "printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure"; // TRANSLATORS: Separation Cutter Timing Failure "printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure"; // TRANSLATORS: Separation Cutter Turned Off "printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off"; // TRANSLATORS: Separation Cutter Turned On "printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On"; // TRANSLATORS: Separation Cutter Under Temperature "printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature"; // TRANSLATORS: Separation Cutter Unrecoverable Failure "printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure"; // TRANSLATORS: Separation Cutter Unrecoverable Storage Error "printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error"; // TRANSLATORS: Separation Cutter Warming Up "printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up"; // TRANSLATORS: Sheet Rotator Added "printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added"; // TRANSLATORS: Sheet Rotator Almost Empty "printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty"; // TRANSLATORS: Sheet Rotator Almost Full "printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full"; // TRANSLATORS: Sheet Rotator At Limit "printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit"; // TRANSLATORS: Sheet Rotator Closed "printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed"; // TRANSLATORS: Sheet Rotator Configuration Change "printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change"; // TRANSLATORS: Sheet Rotator Cover Closed "printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed"; // TRANSLATORS: Sheet Rotator Cover Open "printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open"; // TRANSLATORS: Sheet Rotator Empty "printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty"; // TRANSLATORS: Sheet Rotator Full "printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full"; // TRANSLATORS: Sheet Rotator Interlock Closed "printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed"; // TRANSLATORS: Sheet Rotator Interlock Open "printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open"; // TRANSLATORS: Sheet Rotator Jam "printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam"; // TRANSLATORS: Sheet Rotator Life Almost Over "printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over"; // TRANSLATORS: Sheet Rotator Life Over "printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over"; // TRANSLATORS: Sheet Rotator Memory Exhausted "printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted"; // TRANSLATORS: Sheet Rotator Missing "printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing"; // TRANSLATORS: Sheet Rotator Motor Failure "printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure"; // TRANSLATORS: Sheet Rotator Near Limit "printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit"; // TRANSLATORS: Sheet Rotator Offline "printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline"; // TRANSLATORS: Sheet Rotator Opened "printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened"; // TRANSLATORS: Sheet Rotator Over Temperature "printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature"; // TRANSLATORS: Sheet Rotator Power Saver "printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver"; // TRANSLATORS: Sheet Rotator Recoverable Failure "printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure"; // TRANSLATORS: Sheet Rotator Recoverable Storage "printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage"; // TRANSLATORS: Sheet Rotator Removed "printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed"; // TRANSLATORS: Sheet Rotator Resource Added "printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added"; // TRANSLATORS: Sheet Rotator Resource Removed "printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed"; // TRANSLATORS: Sheet Rotator Thermistor Failure "printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure"; // TRANSLATORS: Sheet Rotator Timing Failure "printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure"; // TRANSLATORS: Sheet Rotator Turned Off "printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off"; // TRANSLATORS: Sheet Rotator Turned On "printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On"; // TRANSLATORS: Sheet Rotator Under Temperature "printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature"; // TRANSLATORS: Sheet Rotator Unrecoverable Failure "printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure"; // TRANSLATORS: Sheet Rotator Unrecoverable Storage Error "printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error"; // TRANSLATORS: Sheet Rotator Warming Up "printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up"; // TRANSLATORS: Printer offline "printer-state-reasons.shutdown" = "Shutdown"; // TRANSLATORS: Slitter Added "printer-state-reasons.slitter-added" = "Slitter Added"; // TRANSLATORS: Slitter Almost Empty "printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty"; // TRANSLATORS: Slitter Almost Full "printer-state-reasons.slitter-almost-full" = "Slitter Almost Full"; // TRANSLATORS: Slitter At Limit "printer-state-reasons.slitter-at-limit" = "Slitter At Limit"; // TRANSLATORS: Slitter Closed "printer-state-reasons.slitter-closed" = "Slitter Closed"; // TRANSLATORS: Slitter Configuration Change "printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change"; // TRANSLATORS: Slitter Cover Closed "printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed"; // TRANSLATORS: Slitter Cover Open "printer-state-reasons.slitter-cover-open" = "Slitter Cover Open"; // TRANSLATORS: Slitter Empty "printer-state-reasons.slitter-empty" = "Slitter Empty"; // TRANSLATORS: Slitter Full "printer-state-reasons.slitter-full" = "Slitter Full"; // TRANSLATORS: Slitter Interlock Closed "printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed"; // TRANSLATORS: Slitter Interlock Open "printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open"; // TRANSLATORS: Slitter Jam "printer-state-reasons.slitter-jam" = "Slitter Jam"; // TRANSLATORS: Slitter Life Almost Over "printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over"; // TRANSLATORS: Slitter Life Over "printer-state-reasons.slitter-life-over" = "Slitter Life Over"; // TRANSLATORS: Slitter Memory Exhausted "printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted"; // TRANSLATORS: Slitter Missing "printer-state-reasons.slitter-missing" = "Slitter Missing"; // TRANSLATORS: Slitter Motor Failure "printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure"; // TRANSLATORS: Slitter Near Limit "printer-state-reasons.slitter-near-limit" = "Slitter Near Limit"; // TRANSLATORS: Slitter Offline "printer-state-reasons.slitter-offline" = "Slitter Offline"; // TRANSLATORS: Slitter Opened "printer-state-reasons.slitter-opened" = "Slitter Opened"; // TRANSLATORS: Slitter Over Temperature "printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature"; // TRANSLATORS: Slitter Power Saver "printer-state-reasons.slitter-power-saver" = "Slitter Power Saver"; // TRANSLATORS: Slitter Recoverable Failure "printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure"; // TRANSLATORS: Slitter Recoverable Storage "printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage"; // TRANSLATORS: Slitter Removed "printer-state-reasons.slitter-removed" = "Slitter Removed"; // TRANSLATORS: Slitter Resource Added "printer-state-reasons.slitter-resource-added" = "Slitter Resource Added"; // TRANSLATORS: Slitter Resource Removed "printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed"; // TRANSLATORS: Slitter Thermistor Failure "printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure"; // TRANSLATORS: Slitter Timing Failure "printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure"; // TRANSLATORS: Slitter Turned Off "printer-state-reasons.slitter-turned-off" = "Slitter Turned Off"; // TRANSLATORS: Slitter Turned On "printer-state-reasons.slitter-turned-on" = "Slitter Turned On"; // TRANSLATORS: Slitter Under Temperature "printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature"; // TRANSLATORS: Slitter Unrecoverable Failure "printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure"; // TRANSLATORS: Slitter Unrecoverable Storage Error "printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error"; // TRANSLATORS: Slitter Warming Up "printer-state-reasons.slitter-warming-up" = "Slitter Warming Up"; // TRANSLATORS: Spool Area Full "printer-state-reasons.spool-area-full" = "Spool Area Full"; // TRANSLATORS: Stacker Added "printer-state-reasons.stacker-added" = "Stacker Added"; // TRANSLATORS: Stacker Almost Empty "printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty"; // TRANSLATORS: Stacker Almost Full "printer-state-reasons.stacker-almost-full" = "Stacker Almost Full"; // TRANSLATORS: Stacker At Limit "printer-state-reasons.stacker-at-limit" = "Stacker At Limit"; // TRANSLATORS: Stacker Closed "printer-state-reasons.stacker-closed" = "Stacker Closed"; // TRANSLATORS: Stacker Configuration Change "printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change"; // TRANSLATORS: Stacker Cover Closed "printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed"; // TRANSLATORS: Stacker Cover Open "printer-state-reasons.stacker-cover-open" = "Stacker Cover Open"; // TRANSLATORS: Stacker Empty "printer-state-reasons.stacker-empty" = "Stacker Empty"; // TRANSLATORS: Stacker Full "printer-state-reasons.stacker-full" = "Stacker Full"; // TRANSLATORS: Stacker Interlock Closed "printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed"; // TRANSLATORS: Stacker Interlock Open "printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open"; // TRANSLATORS: Stacker Jam "printer-state-reasons.stacker-jam" = "Stacker Jam"; // TRANSLATORS: Stacker Life Almost Over "printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over"; // TRANSLATORS: Stacker Life Over "printer-state-reasons.stacker-life-over" = "Stacker Life Over"; // TRANSLATORS: Stacker Memory Exhausted "printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted"; // TRANSLATORS: Stacker Missing "printer-state-reasons.stacker-missing" = "Stacker Missing"; // TRANSLATORS: Stacker Motor Failure "printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure"; // TRANSLATORS: Stacker Near Limit "printer-state-reasons.stacker-near-limit" = "Stacker Near Limit"; // TRANSLATORS: Stacker Offline "printer-state-reasons.stacker-offline" = "Stacker Offline"; // TRANSLATORS: Stacker Opened "printer-state-reasons.stacker-opened" = "Stacker Opened"; // TRANSLATORS: Stacker Over Temperature "printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature"; // TRANSLATORS: Stacker Power Saver "printer-state-reasons.stacker-power-saver" = "Stacker Power Saver"; // TRANSLATORS: Stacker Recoverable Failure "printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure"; // TRANSLATORS: Stacker Recoverable Storage "printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage"; // TRANSLATORS: Stacker Removed "printer-state-reasons.stacker-removed" = "Stacker Removed"; // TRANSLATORS: Stacker Resource Added "printer-state-reasons.stacker-resource-added" = "Stacker Resource Added"; // TRANSLATORS: Stacker Resource Removed "printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed"; // TRANSLATORS: Stacker Thermistor Failure "printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure"; // TRANSLATORS: Stacker Timing Failure "printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure"; // TRANSLATORS: Stacker Turned Off "printer-state-reasons.stacker-turned-off" = "Stacker Turned Off"; // TRANSLATORS: Stacker Turned On "printer-state-reasons.stacker-turned-on" = "Stacker Turned On"; // TRANSLATORS: Stacker Under Temperature "printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature"; // TRANSLATORS: Stacker Unrecoverable Failure "printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure"; // TRANSLATORS: Stacker Unrecoverable Storage Error "printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error"; // TRANSLATORS: Stacker Warming Up "printer-state-reasons.stacker-warming-up" = "Stacker Warming Up"; // TRANSLATORS: Stapler Added "printer-state-reasons.stapler-added" = "Stapler Added"; // TRANSLATORS: Stapler Almost Empty "printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty"; // TRANSLATORS: Stapler Almost Full "printer-state-reasons.stapler-almost-full" = "Stapler Almost Full"; // TRANSLATORS: Stapler At Limit "printer-state-reasons.stapler-at-limit" = "Stapler At Limit"; // TRANSLATORS: Stapler Closed "printer-state-reasons.stapler-closed" = "Stapler Closed"; // TRANSLATORS: Stapler Configuration Change "printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change"; // TRANSLATORS: Stapler Cover Closed "printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed"; // TRANSLATORS: Stapler Cover Open "printer-state-reasons.stapler-cover-open" = "Stapler Cover Open"; // TRANSLATORS: Stapler Empty "printer-state-reasons.stapler-empty" = "Stapler Empty"; // TRANSLATORS: Stapler Full "printer-state-reasons.stapler-full" = "Stapler Full"; // TRANSLATORS: Stapler Interlock Closed "printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed"; // TRANSLATORS: Stapler Interlock Open "printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open"; // TRANSLATORS: Stapler Jam "printer-state-reasons.stapler-jam" = "Stapler Jam"; // TRANSLATORS: Stapler Life Almost Over "printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over"; // TRANSLATORS: Stapler Life Over "printer-state-reasons.stapler-life-over" = "Stapler Life Over"; // TRANSLATORS: Stapler Memory Exhausted "printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted"; // TRANSLATORS: Stapler Missing "printer-state-reasons.stapler-missing" = "Stapler Missing"; // TRANSLATORS: Stapler Motor Failure "printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure"; // TRANSLATORS: Stapler Near Limit "printer-state-reasons.stapler-near-limit" = "Stapler Near Limit"; // TRANSLATORS: Stapler Offline "printer-state-reasons.stapler-offline" = "Stapler Offline"; // TRANSLATORS: Stapler Opened "printer-state-reasons.stapler-opened" = "Stapler Opened"; // TRANSLATORS: Stapler Over Temperature "printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature"; // TRANSLATORS: Stapler Power Saver "printer-state-reasons.stapler-power-saver" = "Stapler Power Saver"; // TRANSLATORS: Stapler Recoverable Failure "printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure"; // TRANSLATORS: Stapler Recoverable Storage "printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage"; // TRANSLATORS: Stapler Removed "printer-state-reasons.stapler-removed" = "Stapler Removed"; // TRANSLATORS: Stapler Resource Added "printer-state-reasons.stapler-resource-added" = "Stapler Resource Added"; // TRANSLATORS: Stapler Resource Removed "printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed"; // TRANSLATORS: Stapler Thermistor Failure "printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure"; // TRANSLATORS: Stapler Timing Failure "printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure"; // TRANSLATORS: Stapler Turned Off "printer-state-reasons.stapler-turned-off" = "Stapler Turned Off"; // TRANSLATORS: Stapler Turned On "printer-state-reasons.stapler-turned-on" = "Stapler Turned On"; // TRANSLATORS: Stapler Under Temperature "printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature"; // TRANSLATORS: Stapler Unrecoverable Failure "printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure"; // TRANSLATORS: Stapler Unrecoverable Storage Error "printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error"; // TRANSLATORS: Stapler Warming Up "printer-state-reasons.stapler-warming-up" = "Stapler Warming Up"; // TRANSLATORS: Stitcher Added "printer-state-reasons.stitcher-added" = "Stitcher Added"; // TRANSLATORS: Stitcher Almost Empty "printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty"; // TRANSLATORS: Stitcher Almost Full "printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full"; // TRANSLATORS: Stitcher At Limit "printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit"; // TRANSLATORS: Stitcher Closed "printer-state-reasons.stitcher-closed" = "Stitcher Closed"; // TRANSLATORS: Stitcher Configuration Change "printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change"; // TRANSLATORS: Stitcher Cover Closed "printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed"; // TRANSLATORS: Stitcher Cover Open "printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open"; // TRANSLATORS: Stitcher Empty "printer-state-reasons.stitcher-empty" = "Stitcher Empty"; // TRANSLATORS: Stitcher Full "printer-state-reasons.stitcher-full" = "Stitcher Full"; // TRANSLATORS: Stitcher Interlock Closed "printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed"; // TRANSLATORS: Stitcher Interlock Open "printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open"; // TRANSLATORS: Stitcher Jam "printer-state-reasons.stitcher-jam" = "Stitcher Jam"; // TRANSLATORS: Stitcher Life Almost Over "printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over"; // TRANSLATORS: Stitcher Life Over "printer-state-reasons.stitcher-life-over" = "Stitcher Life Over"; // TRANSLATORS: Stitcher Memory Exhausted "printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted"; // TRANSLATORS: Stitcher Missing "printer-state-reasons.stitcher-missing" = "Stitcher Missing"; // TRANSLATORS: Stitcher Motor Failure "printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure"; // TRANSLATORS: Stitcher Near Limit "printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit"; // TRANSLATORS: Stitcher Offline "printer-state-reasons.stitcher-offline" = "Stitcher Offline"; // TRANSLATORS: Stitcher Opened "printer-state-reasons.stitcher-opened" = "Stitcher Opened"; // TRANSLATORS: Stitcher Over Temperature "printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature"; // TRANSLATORS: Stitcher Power Saver "printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver"; // TRANSLATORS: Stitcher Recoverable Failure "printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure"; // TRANSLATORS: Stitcher Recoverable Storage "printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage"; // TRANSLATORS: Stitcher Removed "printer-state-reasons.stitcher-removed" = "Stitcher Removed"; // TRANSLATORS: Stitcher Resource Added "printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added"; // TRANSLATORS: Stitcher Resource Removed "printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed"; // TRANSLATORS: Stitcher Thermistor Failure "printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure"; // TRANSLATORS: Stitcher Timing Failure "printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure"; // TRANSLATORS: Stitcher Turned Off "printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off"; // TRANSLATORS: Stitcher Turned On "printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On"; // TRANSLATORS: Stitcher Under Temperature "printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature"; // TRANSLATORS: Stitcher Unrecoverable Failure "printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure"; // TRANSLATORS: Stitcher Unrecoverable Storage Error "printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error"; // TRANSLATORS: Stitcher Warming Up "printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up"; // TRANSLATORS: Partially stopped "printer-state-reasons.stopped-partly" = "Stopped Partly"; // TRANSLATORS: Stopping "printer-state-reasons.stopping" = "Stopping"; // TRANSLATORS: Subunit Added "printer-state-reasons.subunit-added" = "Subunit Added"; // TRANSLATORS: Subunit Almost Empty "printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty"; // TRANSLATORS: Subunit Almost Full "printer-state-reasons.subunit-almost-full" = "Subunit Almost Full"; // TRANSLATORS: Subunit At Limit "printer-state-reasons.subunit-at-limit" = "Subunit At Limit"; // TRANSLATORS: Subunit Closed "printer-state-reasons.subunit-closed" = "Subunit Closed"; // TRANSLATORS: Subunit Cooling Down "printer-state-reasons.subunit-cooling-down" = "Subunit Cooling Down"; // TRANSLATORS: Subunit Empty "printer-state-reasons.subunit-empty" = "Subunit Empty"; // TRANSLATORS: Subunit Full "printer-state-reasons.subunit-full" = "Subunit Full"; // TRANSLATORS: Subunit Life Almost Over "printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over"; // TRANSLATORS: Subunit Life Over "printer-state-reasons.subunit-life-over" = "Subunit Life Over"; // TRANSLATORS: Subunit Memory Exhausted "printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted"; // TRANSLATORS: Subunit Missing "printer-state-reasons.subunit-missing" = "Subunit Missing"; // TRANSLATORS: Subunit Motor Failure "printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure"; // TRANSLATORS: Subunit Near Limit "printer-state-reasons.subunit-near-limit" = "Subunit Near Limit"; // TRANSLATORS: Subunit Offline "printer-state-reasons.subunit-offline" = "Subunit Offline"; // TRANSLATORS: Subunit Opened "printer-state-reasons.subunit-opened" = "Subunit Opened"; // TRANSLATORS: Subunit Over Temperature "printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature"; // TRANSLATORS: Subunit Power Saver "printer-state-reasons.subunit-power-saver" = "Subunit Power Saver"; // TRANSLATORS: Subunit Recoverable Failure "printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure"; // TRANSLATORS: Subunit Recoverable Storage "printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage"; // TRANSLATORS: Subunit Removed "printer-state-reasons.subunit-removed" = "Subunit Removed"; // TRANSLATORS: Subunit Resource Added "printer-state-reasons.subunit-resource-added" = "Subunit Resource Added"; // TRANSLATORS: Subunit Resource Removed "printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed"; // TRANSLATORS: Subunit Thermistor Failure "printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure"; // TRANSLATORS: Subunit Timing Failure "printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure"; // TRANSLATORS: Subunit Turned Off "printer-state-reasons.subunit-turned-off" = "Subunit Turned Off"; // TRANSLATORS: Subunit Turned On "printer-state-reasons.subunit-turned-on" = "Subunit Turned On"; // TRANSLATORS: Subunit Under Temperature "printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature"; // TRANSLATORS: Subunit Unrecoverable Failure "printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure"; // TRANSLATORS: Subunit Unrecoverable Storage "printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage"; // TRANSLATORS: Subunit Warming Up "printer-state-reasons.subunit-warming-up" = "Subunit Warming Up"; // TRANSLATORS: Printer stopped responding "printer-state-reasons.timed-out" = "Timed Out"; // TRANSLATORS: Out of toner "printer-state-reasons.toner-empty" = "Toner Empty"; // TRANSLATORS: Toner low "printer-state-reasons.toner-low" = "Toner Low"; // TRANSLATORS: Trimmer Added "printer-state-reasons.trimmer-added" = "Trimmer Added"; // TRANSLATORS: Trimmer Almost Empty "printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty"; // TRANSLATORS: Trimmer Almost Full "printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full"; // TRANSLATORS: Trimmer At Limit "printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit"; // TRANSLATORS: Trimmer Closed "printer-state-reasons.trimmer-closed" = "Trimmer Closed"; // TRANSLATORS: Trimmer Configuration Change "printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change"; // TRANSLATORS: Trimmer Cover Closed "printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed"; // TRANSLATORS: Trimmer Cover Open "printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open"; // TRANSLATORS: Trimmer Empty "printer-state-reasons.trimmer-empty" = "Trimmer Empty"; // TRANSLATORS: Trimmer Full "printer-state-reasons.trimmer-full" = "Trimmer Full"; // TRANSLATORS: Trimmer Interlock Closed "printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed"; // TRANSLATORS: Trimmer Interlock Open "printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open"; // TRANSLATORS: Trimmer Jam "printer-state-reasons.trimmer-jam" = "Trimmer Jam"; // TRANSLATORS: Trimmer Life Almost Over "printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over"; // TRANSLATORS: Trimmer Life Over "printer-state-reasons.trimmer-life-over" = "Trimmer Life Over"; // TRANSLATORS: Trimmer Memory Exhausted "printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted"; // TRANSLATORS: Trimmer Missing "printer-state-reasons.trimmer-missing" = "Trimmer Missing"; // TRANSLATORS: Trimmer Motor Failure "printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure"; // TRANSLATORS: Trimmer Near Limit "printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit"; // TRANSLATORS: Trimmer Offline "printer-state-reasons.trimmer-offline" = "Trimmer Offline"; // TRANSLATORS: Trimmer Opened "printer-state-reasons.trimmer-opened" = "Trimmer Opened"; // TRANSLATORS: Trimmer Over Temperature "printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature"; // TRANSLATORS: Trimmer Power Saver "printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver"; // TRANSLATORS: Trimmer Recoverable Failure "printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure"; // TRANSLATORS: Trimmer Recoverable Storage "printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage"; // TRANSLATORS: Trimmer Removed "printer-state-reasons.trimmer-removed" = "Trimmer Removed"; // TRANSLATORS: Trimmer Resource Added "printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added"; // TRANSLATORS: Trimmer Resource Removed "printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed"; // TRANSLATORS: Trimmer Thermistor Failure "printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure"; // TRANSLATORS: Trimmer Timing Failure "printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure"; // TRANSLATORS: Trimmer Turned Off "printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off"; // TRANSLATORS: Trimmer Turned On "printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On"; // TRANSLATORS: Trimmer Under Temperature "printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature"; // TRANSLATORS: Trimmer Unrecoverable Failure "printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure"; // TRANSLATORS: Trimmer Unrecoverable Storage Error "printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error"; // TRANSLATORS: Trimmer Warming Up "printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up"; // TRANSLATORS: Unknown "printer-state-reasons.unknown" = "Unknown"; // TRANSLATORS: Wrapper Added "printer-state-reasons.wrapper-added" = "Wrapper Added"; // TRANSLATORS: Wrapper Almost Empty "printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty"; // TRANSLATORS: Wrapper Almost Full "printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full"; // TRANSLATORS: Wrapper At Limit "printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit"; // TRANSLATORS: Wrapper Closed "printer-state-reasons.wrapper-closed" = "Wrapper Closed"; // TRANSLATORS: Wrapper Configuration Change "printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change"; // TRANSLATORS: Wrapper Cover Closed "printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed"; // TRANSLATORS: Wrapper Cover Open "printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open"; // TRANSLATORS: Wrapper Empty "printer-state-reasons.wrapper-empty" = "Wrapper Empty"; // TRANSLATORS: Wrapper Full "printer-state-reasons.wrapper-full" = "Wrapper Full"; // TRANSLATORS: Wrapper Interlock Closed "printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed"; // TRANSLATORS: Wrapper Interlock Open "printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open"; // TRANSLATORS: Wrapper Jam "printer-state-reasons.wrapper-jam" = "Wrapper Jam"; // TRANSLATORS: Wrapper Life Almost Over "printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over"; // TRANSLATORS: Wrapper Life Over "printer-state-reasons.wrapper-life-over" = "Wrapper Life Over"; // TRANSLATORS: Wrapper Memory Exhausted "printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted"; // TRANSLATORS: Wrapper Missing "printer-state-reasons.wrapper-missing" = "Wrapper Missing"; // TRANSLATORS: Wrapper Motor Failure "printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure"; // TRANSLATORS: Wrapper Near Limit "printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit"; // TRANSLATORS: Wrapper Offline "printer-state-reasons.wrapper-offline" = "Wrapper Offline"; // TRANSLATORS: Wrapper Opened "printer-state-reasons.wrapper-opened" = "Wrapper Opened"; // TRANSLATORS: Wrapper Over Temperature "printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature"; // TRANSLATORS: Wrapper Power Saver "printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver"; // TRANSLATORS: Wrapper Recoverable Failure "printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure"; // TRANSLATORS: Wrapper Recoverable Storage "printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage"; // TRANSLATORS: Wrapper Removed "printer-state-reasons.wrapper-removed" = "Wrapper Removed"; // TRANSLATORS: Wrapper Resource Added "printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added"; // TRANSLATORS: Wrapper Resource Removed "printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed"; // TRANSLATORS: Wrapper Thermistor Failure "printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure"; // TRANSLATORS: Wrapper Timing Failure "printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure"; // TRANSLATORS: Wrapper Turned Off "printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off"; // TRANSLATORS: Wrapper Turned On "printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On"; // TRANSLATORS: Wrapper Under Temperature "printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature"; // TRANSLATORS: Wrapper Unrecoverable Failure "printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure"; // TRANSLATORS: Wrapper Unrecoverable Storage Error "printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error"; // TRANSLATORS: Wrapper Warming Up "printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up"; // TRANSLATORS: Idle "printer-state.3" = "Idle"; // TRANSLATORS: Processing "printer-state.4" = "Processing"; // TRANSLATORS: Stopped "printer-state.5" = "Stopped"; // TRANSLATORS: Printer Uptime "printer-up-time" = "Printer Uptime"; "processing" = "processing"; // TRANSLATORS: Proof Print "proof-print" = "Proof Print"; // TRANSLATORS: Proof Print Copies "proof-print-copies" = "Proof Print Copies"; // TRANSLATORS: Punching "punching" = "Punching"; // TRANSLATORS: Punching Locations "punching-locations" = "Punching Locations"; // TRANSLATORS: Punching Offset "punching-offset" = "Punching Offset"; // TRANSLATORS: Punch Edge "punching-reference-edge" = "Punch Edge"; // TRANSLATORS: Bottom "punching-reference-edge.bottom" = "Bottom"; // TRANSLATORS: Left "punching-reference-edge.left" = "Left"; // TRANSLATORS: Right "punching-reference-edge.right" = "Right"; // TRANSLATORS: Top "punching-reference-edge.top" = "Top"; "request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))"; "request-id uses indefinite length" = "request-id uses indefinite length"; // TRANSLATORS: Requested Attributes "requested-attributes" = "Requested Attributes"; // TRANSLATORS: Retry Interval "retry-interval" = "Retry Interval"; // TRANSLATORS: Retry Timeout "retry-time-out" = "Retry Timeout"; // TRANSLATORS: Save Disposition "save-disposition" = "Save Disposition"; // TRANSLATORS: None "save-disposition.none" = "None"; // TRANSLATORS: Print and Save "save-disposition.print-save" = "Print and Save"; // TRANSLATORS: Save Only "save-disposition.save-only" = "Save Only"; // TRANSLATORS: Save Document Format "save-document-format" = "Save Document Format"; // TRANSLATORS: Save Info "save-info" = "Save Info"; // TRANSLATORS: Save Location "save-location" = "Save Location"; // TRANSLATORS: Save Name "save-name" = "Save Name"; "scheduler is not running" = "scheduler is not running"; "scheduler is running" = "scheduler is running"; // TRANSLATORS: Separator Sheets "separator-sheets" = "Separator Sheets"; // TRANSLATORS: Type of Separator Sheets "separator-sheets-type" = "Type of Separator Sheets"; // TRANSLATORS: Start and End Sheets "separator-sheets-type.both-sheets" = "Start and End Sheets"; // TRANSLATORS: End Sheet "separator-sheets-type.end-sheet" = "End Sheet"; // TRANSLATORS: None "separator-sheets-type.none" = "None"; // TRANSLATORS: Slip Sheets "separator-sheets-type.slip-sheets" = "Slip Sheets"; // TRANSLATORS: Start Sheet "separator-sheets-type.start-sheet" = "Start Sheet"; // TRANSLATORS: 2-Sided Printing "sides" = "2-Sided Printing"; // TRANSLATORS: Off "sides.one-sided" = "Off"; // TRANSLATORS: On (Portrait) "sides.two-sided-long-edge" = "On (Portrait)"; // TRANSLATORS: On (Landscape) "sides.two-sided-short-edge" = "On (Landscape)"; "stat of %s failed: %s" = "stat of %s failed: %s"; "status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue."; // TRANSLATORS: Status Message "status-message" = "Status Message"; // TRANSLATORS: Staple "stitching" = "Staple"; // TRANSLATORS: Stitching Angle "stitching-angle" = "Stitching Angle"; // TRANSLATORS: Stitching Locations "stitching-locations" = "Stitching Locations"; // TRANSLATORS: Staple Method "stitching-method" = "Staple Method"; // TRANSLATORS: Automatic "stitching-method.auto" = "Automatic"; // TRANSLATORS: Crimp "stitching-method.crimp" = "Crimp"; // TRANSLATORS: Wire "stitching-method.wire" = "Wire"; // TRANSLATORS: Stitching Offset "stitching-offset" = "Stitching Offset"; // TRANSLATORS: Staple Edge "stitching-reference-edge" = "Staple Edge"; // TRANSLATORS: Bottom "stitching-reference-edge.bottom" = "Bottom"; // TRANSLATORS: Left "stitching-reference-edge.left" = "Left"; // TRANSLATORS: Right "stitching-reference-edge.right" = "Right"; // TRANSLATORS: Top "stitching-reference-edge.top" = "Top"; "stopped" = "stopped"; // TRANSLATORS: Subject "subject" = "Subject"; // TRANSLATORS: Subscription Privacy Attributes "subscription-privacy-attributes" = "Subscription Privacy Attributes"; // TRANSLATORS: All "subscription-privacy-attributes.all" = "All"; // TRANSLATORS: Default "subscription-privacy-attributes.default" = "Default"; // TRANSLATORS: None "subscription-privacy-attributes.none" = "None"; // TRANSLATORS: Subscription Description "subscription-privacy-attributes.subscription-description" = "Subscription Description"; // TRANSLATORS: Subscription Template "subscription-privacy-attributes.subscription-template" = "Subscription Template"; // TRANSLATORS: Subscription Privacy Scope "subscription-privacy-scope" = "Subscription Privacy Scope"; // TRANSLATORS: All "subscription-privacy-scope.all" = "All"; // TRANSLATORS: Default "subscription-privacy-scope.default" = "Default"; // TRANSLATORS: None "subscription-privacy-scope.none" = "None"; // TRANSLATORS: Owner "subscription-privacy-scope.owner" = "Owner"; "system default destination: %s" = "system default destination: %s"; "system default destination: %s/%s" = "system default destination: %s/%s"; // TRANSLATORS: T33 Subaddress "t33-subaddress" = "T33 Subaddress"; // TRANSLATORS: To Name "to-name" = "To Name"; // TRANSLATORS: Transmission Status "transmission-status" = "Transmission Status"; // TRANSLATORS: Pending "transmission-status.3" = "Pending"; // TRANSLATORS: Pending Retry "transmission-status.4" = "Pending Retry"; // TRANSLATORS: Processing "transmission-status.5" = "Processing"; // TRANSLATORS: Canceled "transmission-status.7" = "Canceled"; // TRANSLATORS: Aborted "transmission-status.8" = "Aborted"; // TRANSLATORS: Completed "transmission-status.9" = "Completed"; // TRANSLATORS: Cut "trimming" = "Cut"; // TRANSLATORS: Cut Position "trimming-offset" = "Cut Position"; // TRANSLATORS: Cut Edge "trimming-reference-edge" = "Cut Edge"; // TRANSLATORS: Bottom "trimming-reference-edge.bottom" = "Bottom"; // TRANSLATORS: Left "trimming-reference-edge.left" = "Left"; // TRANSLATORS: Right "trimming-reference-edge.right" = "Right"; // TRANSLATORS: Top "trimming-reference-edge.top" = "Top"; // TRANSLATORS: Type of Cut "trimming-type" = "Type of Cut"; // TRANSLATORS: Draw Line "trimming-type.draw-line" = "Draw Line"; // TRANSLATORS: Full "trimming-type.full" = "Full"; // TRANSLATORS: Partial "trimming-type.partial" = "Partial"; // TRANSLATORS: Perforate "trimming-type.perforate" = "Perforate"; // TRANSLATORS: Score "trimming-type.score" = "Score"; // TRANSLATORS: Tab "trimming-type.tab" = "Tab"; // TRANSLATORS: Cut After "trimming-when" = "Cut After"; // TRANSLATORS: Every Document "trimming-when.after-documents" = "Every Document"; // TRANSLATORS: Job "trimming-when.after-job" = "Job"; // TRANSLATORS: Every Set "trimming-when.after-sets" = "Every Set"; // TRANSLATORS: Every Page "trimming-when.after-sheets" = "Every Page"; "unknown" = "unknown"; "untitled" = "untitled"; "variable-bindings uses indefinite length" = "variable-bindings uses indefinite length"; // TRANSLATORS: X Accuracy "x-accuracy" = "X Accuracy"; // TRANSLATORS: X Dimension "x-dimension" = "X Dimension"; // TRANSLATORS: X Offset "x-offset" = "X Offset"; // TRANSLATORS: X Origin "x-origin" = "X Origin"; // TRANSLATORS: Y Accuracy "y-accuracy" = "Y Accuracy"; // TRANSLATORS: Y Dimension "y-dimension" = "Y Dimension"; // TRANSLATORS: Y Offset "y-offset" = "Y Offset"; // TRANSLATORS: Y Origin "y-origin" = "Y Origin"; // TRANSLATORS: Z Accuracy "z-accuracy" = "Z Accuracy"; // TRANSLATORS: Z Dimension "z-dimension" = "Z Dimension"; // TRANSLATORS: Z Offset "z-offset" = "Z Offset"; "{service_domain} Domain name" = "{service_domain} Domain name"; "{service_hostname} Fully-qualified domain name" = "{service_hostname} Fully-qualified domain name"; "{service_name} Service instance name" = "{service_name} Service instance name"; "{service_port} Port number" = "{service_port} Port number"; "{service_regtype} DNS-SD registration type" = "{service_regtype} DNS-SD registration type"; "{service_scheme} URI scheme" = "{service_scheme} URI scheme"; "{service_uri} URI" = "{service_uri} URI"; "{txt_*} Value of TXT record key" = "{txt_*} Value of TXT record key"; "{} URI" = "{} URI"; "~/.cups/lpoptions file names default destination that does not exist." = "~/.cups/lpoptions file names default destination that does not exist.";