openkylin
/
cups
mirror of https://gitee.com/openkylin/cups.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
cups/locale/cups.strings

6248 lines
329 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

"\t\t(all)" = "\t\t(all)";
"\t\t(none)" = "\t\t(none)";
"\t%d entries" = "\t%d entries";
"\t%s" = "\t%s";
"\tAfter fault: continue" = "\tAfter fault: continue";
"\tAlerts: %s" = "\tAlerts: %s";
"\tBanner required" = "\tBanner required";
"\tCharset sets:" = "\tCharset sets:";
"\tConnection: direct" = "\tConnection: direct";
"\tConnection: remote" = "\tConnection: remote";
"\tContent types: any" = "\tContent types: any";
"\tDefault page size:" = "\tDefault page size:";
"\tDefault pitch:" = "\tDefault pitch:";
"\tDefault port settings:" = "\tDefault port settings:";
"\tDescription: %s" = "\tDescription: %s";
"\tForm mounted:" = "\tForm mounted:";
"\tForms allowed:" = "\tForms allowed:";
"\tInterface: %s.ppd" = "\tInterface: %s.ppd";
"\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd";
"\tLocation: %s" = "\tLocation: %s";
"\tOn fault: no alert" = "\tOn fault: no alert";
"\tPrinter types: unknown" = "\tPrinter types: unknown";
"\tStatus: %s" = "\tStatus: %s";
"\tUsers allowed:" = "\tUsers allowed:";
"\tUsers denied:" = "\tUsers denied:";
"\tdaemon present" = "\tdaemon present";
"\tno entries" = "\tno entries";
"\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1";
"\tprinting is disabled" = "\tprinting is disabled";
"\tprinting is enabled" = "\tprinting is enabled";
"\tqueued for %s" = "\tqueued for %s";
"\tqueuing is disabled" = "\tqueuing is disabled";
"\tqueuing is enabled" = "\tqueuing is enabled";
"\treason unknown" = "\treason unknown";
"\n DETAILED CONFORMANCE TEST RESULTS" = "\n DETAILED CONFORMANCE TEST RESULTS";
" REF: Page 15, section 3.1." = " REF: Page 15, section 3.1.";
" REF: Page 15, section 3.2." = " REF: Page 15, section 3.2.";
" REF: Page 19, section 3.3." = " REF: Page 19, section 3.3.";
" REF: Page 20, section 3.4." = " REF: Page 20, section 3.4.";
" REF: Page 27, section 3.5." = " REF: Page 27, section 3.5.";
" REF: Page 42, section 5.2." = " REF: Page 42, section 5.2.";
" REF: Pages 16-17, section 3.2." = " REF: Pages 16-17, section 3.2.";
" REF: Pages 42-45, section 5.2." = " REF: Pages 42-45, section 5.2.";
" REF: Pages 45-46, section 5.2." = " REF: Pages 45-46, section 5.2.";
" REF: Pages 48-49, section 5.2." = " REF: Pages 48-49, section 5.2.";
" REF: Pages 52-54, section 5.2." = " REF: Pages 52-54, section 5.2.";
" %-39.39s %.0f bytes" = " %-39.39s %.0f bytes";
" PASS Default%s" = " PASS Default%s";
" PASS DefaultImageableArea" = " PASS DefaultImageableArea";
" PASS DefaultPaperDimension" = " PASS DefaultPaperDimension";
" PASS FileVersion" = " PASS FileVersion";
" PASS FormatVersion" = " PASS FormatVersion";
" PASS LanguageEncoding" = " PASS LanguageEncoding";
" PASS LanguageVersion" = " PASS LanguageVersion";
" PASS Manufacturer" = " PASS Manufacturer";
" PASS ModelName" = " PASS ModelName";
" PASS NickName" = " PASS NickName";
" PASS PCFileName" = " PASS PCFileName";
" PASS PSVersion" = " PASS PSVersion";
" PASS PageRegion" = " PASS PageRegion";
" PASS PageSize" = " PASS PageSize";
" PASS Product" = " PASS Product";
" PASS ShortNickName" = " PASS ShortNickName";
" WARN %s has no corresponding options." = " WARN %s has no corresponding options.";
" WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2." = " WARN %s shares a common prefix with %s\n REF: Page 15, section 3.2.";
" WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17" = " WARN Duplex option keyword %s may not work as expected and should be named Duplex.\n REF: Page 122, section 5.17";
" WARN File contains a mix of CR, LF, and CR LF line endings." = " WARN File contains a mix of CR, LF, and CR LF line endings.";
" WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3." = " WARN LanguageEncoding required by PPD 4.3 spec.\n REF: Pages 56-57, section 5.3.";
" WARN Line %d only contains whitespace." = " WARN Line %d only contains whitespace.";
" WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3." = " WARN Manufacturer required by PPD 4.3 spec.\n REF: Pages 58-59, section 5.3.";
" WARN Non-Windows PPD files should use lines ending with only LF, not CR LF." = " WARN Non-Windows PPD files should use lines ending with only LF, not CR LF.";
" WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2." = " WARN Obsolete PPD version %.1f.\n REF: Page 42, section 5.2.";
" WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName longer than 8.3 in violation of PPD spec.\n REF: Pages 61-62, section 5.3.";
" WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3." = " WARN PCFileName should contain a unique filename.\n REF: Pages 61-62, section 5.3.";
" WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains PJL but JCL attributes are not set.\n REF: Pages 78-79, section 5.7.";
" WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7." = " WARN Protocols contains both PJL and BCP; expected TBCP.\n REF: Pages 78-79, section 5.7.";
" WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3." = " WARN ShortNickName required by PPD 4.3 spec.\n REF: Pages 64-65, section 5.3.";
" %s \"%s %s\" conflicts with \"%s %s\"\n (constraint=\"%s %s %s %s\")." = " %s “%s %s” conflicts with “%s %s”\n (constraint=“%s %s %s %s”).";
" %s %s %s does not exist." = " %s %s %s does not exist.";
" %s %s file \"%s\" has the wrong capitalization." = " %s %s file “%s” has the wrong capitalization.";
" %s Bad %s choice %s.\n REF: Page 122, section 5.17" = " %s Bad %s choice %s.\n REF: Page 122, section 5.17";
" %s Bad UTF-8 \"%s\" translation string for option %s, choice %s." = " %s Bad UTF-8 “%s” translation string for option %s, choice %s.";
" %s Bad UTF-8 \"%s\" translation string for option %s." = " %s Bad UTF-8 “%s” translation string for option %s.";
" %s Bad cupsFilter value \"%s\"." = " %s Bad cupsFilter value “%s”.";
" %s Bad cupsFilter2 value \"%s\"." = " %s Bad cupsFilter2 value “%s”.";
" %s Bad cupsICCProfile %s." = " %s Bad cupsICCProfile %s.";
" %s Bad cupsPreFilter value \"%s\"." = " %s Bad cupsPreFilter value “%s”.";
" %s Bad cupsUIConstraints %s: \"%s\"" = " %s Bad cupsUIConstraints %s: “%s”";
" %s Bad language \"%s\"." = " %s Bad language “%s”.";
" %s Bad permissions on %s file \"%s\"." = " %s Bad permissions on %s file “%s”.";
" %s Bad spelling of %s - should be %s." = " %s Bad spelling of %s - should be %s.";
" %s Cannot provide both APScanAppPath and APScanAppBundleID." = " %s Cannot provide both APScanAppPath and APScanAppBundleID.";
" %s Default choices conflicting." = " %s Default choices conflicting.";
" %s Empty cupsUIConstraints %s" = " %s Empty cupsUIConstraints %s";
" %s Missing \"%s\" translation string for option %s, choice %s." = " %s Missing “%s” translation string for option %s, choice %s.";
" %s Missing \"%s\" translation string for option %s." = " %s Missing “%s” translation string for option %s.";
" %s Missing %s file \"%s\"." = " %s Missing %s file “%s”.";
" %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14." = " %s Missing REQUIRED PageRegion option.\n REF: Page 100, section 5.14.";
" %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14." = " %s Missing REQUIRED PageSize option.\n REF: Page 99, section 5.14.";
" %s Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing choice *%s %s in UIConstraints “*%s %s *%s %s”.";
" %s Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = " %s Missing choice *%s %s in cupsUIConstraints %s: “%s”";
" %s Missing cupsUIResolver %s" = " %s Missing cupsUIResolver %s";
" %s Missing option %s in UIConstraints \"*%s %s *%s %s\"." = " %s Missing option %s in UIConstraints “*%s %s *%s %s”.";
" %s Missing option %s in cupsUIConstraints %s: \"%s\"" = " %s Missing option %s in cupsUIConstraints %s: “%s”";
" %s No base translation \"%s\" is included in file." = " %s No base translation “%s” is included in file.";
" %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17" = " %s REQUIRED %s does not define choice None.\n REF: Page 122, section 5.17";
" %s Size \"%s\" defined for %s but not for %s." = " %s Size “%s” defined for %s but not for %s.";
" %s Size \"%s\" has unexpected dimensions (%gx%g)." = " %s Size “%s” has unexpected dimensions (%gx%g).";
" %s Size \"%s\" should be \"%s\"." = " %s Size “%s” should be “%s”.";
" %s Size \"%s\" should be the Adobe standard name \"%s\"." = " %s Size “%s” should be the Adobe standard name “%s”.";
" %s cupsICCProfile %s hash value collides with %s." = " %s cupsICCProfile %s hash value collides with %s.";
" %s cupsUIResolver %s causes a loop." = " %s cupsUIResolver %s causes a loop.";
" %s cupsUIResolver %s does not list at least two different options." = " %s cupsUIResolver %s does not list at least two different options.";
" **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5" = " **FAIL** %s must be 1284DeviceID\n REF: Page 72, section 5.5";
" **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5." = " **FAIL** Bad Default%s %s\n REF: Page 40, section 4.5.";
" **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15." = " **FAIL** Bad DefaultImageableArea %s\n REF: Page 102, section 5.15.";
" **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15." = " **FAIL** Bad DefaultPaperDimension %s\n REF: Page 103, section 5.15.";
" **FAIL** Bad FileVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FileVersion “%s”\n REF: Page 56, section 5.3.";
" **FAIL** Bad FormatVersion \"%s\"\n REF: Page 56, section 5.3." = " **FAIL** Bad FormatVersion “%s”\n REF: Page 56, section 5.3.";
" **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4." = " **FAIL** Bad JobPatchFile attribute in file\n REF: Page 24, section 3.4.";
" **FAIL** Bad LanguageEncoding %s - must be ISOLatin1." = " **FAIL** Bad LanguageEncoding %s - must be ISOLatin1.";
" **FAIL** Bad LanguageVersion %s - must be English." = " **FAIL** Bad LanguageVersion %s - must be English.";
" **FAIL** Bad Manufacturer (should be \"%s\")\n REF: Page 211, table D.1." = " **FAIL** Bad Manufacturer (should be “%s”)\n REF: Page 211, table D.1.";
" **FAIL** Bad ModelName - \"%c\" not allowed in string.\n REF: Pages 59-60, section 5.3." = " **FAIL** Bad ModelName - “%c” not allowed in string.\n REF: Pages 59-60, section 5.3.";
" **FAIL** Bad PSVersion - not \"(string) int\".\n REF: Pages 62-64, section 5.3." = " **FAIL** Bad PSVersion - not “(string) int”.\n REF: Pages 62-64, section 5.3.";
" **FAIL** Bad Product - not \"(string)\".\n REF: Page 62, section 5.3." = " **FAIL** Bad Product - not “(string)”.\n REF: Page 62, section 5.3.";
" **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3." = " **FAIL** Bad ShortNickName - longer than 31 chars.\n REF: Pages 64-65, section 5.3.";
" **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9" = " **FAIL** Bad option %s choice %s\n REF: Page 84, section 5.9";
" **FAIL** Default option code cannot be interpreted: %s" = " **FAIL** Default option code cannot be interpreted: %s";
" **FAIL** Default translation string for option %s choice %s contains 8-bit characters." = " **FAIL** Default translation string for option %s choice %s contains 8-bit characters.";
" **FAIL** Default translation string for option %s contains 8-bit characters." = " **FAIL** Default translation string for option %s contains 8-bit characters.";
" **FAIL** Group names %s and %s differ only by case." = " **FAIL** Group names %s and %s differ only by case.";
" **FAIL** Multiple occurrences of option %s choice name %s." = " **FAIL** Multiple occurrences of option %s choice name %s.";
" **FAIL** Option %s choice names %s and %s differ only by case." = " **FAIL** Option %s choice names %s and %s differ only by case.";
" **FAIL** Option names %s and %s differ only by case." = " **FAIL** Option names %s and %s differ only by case.";
" **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5." = " **FAIL** REQUIRED Default%s\n REF: Page 40, section 4.5.";
" **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED DefaultImageableArea\n REF: Page 102, section 5.15.";
" **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED DefaultPaperDimension\n REF: Page 103, section 5.15.";
" **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FileVersion\n REF: Page 56, section 5.3.";
" **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3." = " **FAIL** REQUIRED FormatVersion\n REF: Page 56, section 5.3.";
" **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15." = " **FAIL** REQUIRED ImageableArea for PageSize %s\n REF: Page 41, section 5.\n REF: Page 102, section 5.15.";
" **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3." = " **FAIL** REQUIRED LanguageEncoding\n REF: Pages 56-57, section 5.3.";
" **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3." = " **FAIL** REQUIRED LanguageVersion\n REF: Pages 57-58, section 5.3.";
" **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3." = " **FAIL** REQUIRED Manufacturer\n REF: Pages 58-59, section 5.3.";
" **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3." = " **FAIL** REQUIRED ModelName\n REF: Pages 59-60, section 5.3.";
" **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3." = " **FAIL** REQUIRED NickName\n REF: Page 60, section 5.3.";
" **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3." = " **FAIL** REQUIRED PCFileName\n REF: Pages 61-62, section 5.3.";
" **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3." = " **FAIL** REQUIRED PSVersion\n REF: Pages 62-64, section 5.3.";
" **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14." = " **FAIL** REQUIRED PageRegion\n REF: Page 100, section 5.14.";
" **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Page 41, section 5.\n REF: Page 99, section 5.14.";
" **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14." = " **FAIL** REQUIRED PageSize\n REF: Pages 99-100, section 5.14.";
" **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15." = " **FAIL** REQUIRED PaperDimension for PageSize %s\n REF: Page 41, section 5.\n REF: Page 103, section 5.15.";
" **FAIL** REQUIRED Product\n REF: Page 62, section 5.3." = " **FAIL** REQUIRED Product\n REF: Page 62, section 5.3.";
" **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3." = " **FAIL** REQUIRED ShortNickName\n REF: Page 64-65, section 5.3.";
" **FAIL** Unable to open PPD file - %s on line %d." = " **FAIL** Unable to open PPD file - %s on line %d.";
" %d ERRORS FOUND" = " %d ERRORS FOUND";
" NO ERRORS FOUND" = " NO ERRORS FOUND";
" --cr End lines with CR (Mac OS 9)." = " --cr End lines with CR (Mac OS 9).";
" --crlf End lines with CR + LF (Windows)." = " --crlf End lines with CR + LF (Windows).";
" --lf End lines with LF (UNIX/Linux/macOS)." = " --lf End lines with LF (UNIX/Linux/macOS).";
" --list-filters List filters that will be used." = " --list-filters List filters that will be used.";
" -D Remove the input file when finished." = " -D Remove the input file when finished.";
" -D name=value Set named variable to value." = " -D name=value Set named variable to value.";
" -I include-dir Add include directory to search path." = " -I include-dir Add include directory to search path.";
" -P filename.ppd Set PPD file." = " -P filename.ppd Set PPD file.";
" -U username Specify username." = " -U username Specify username.";
" -c catalog.po Load the specified message catalog." = " -c catalog.po Load the specified message catalog.";
" -c cups-files.conf Set cups-files.conf file to use." = " -c cups-files.conf Set cups-files.conf file to use.";
" -d output-dir Specify the output directory." = " -d output-dir Specify the output directory.";
" -d printer Use the named printer." = " -d printer Use the named printer.";
" -e Use every filter from the PPD file." = " -e Use every filter from the PPD file.";
" -i mime/type Set input MIME type (otherwise auto-typed)." = " -i mime/type Set input MIME type (otherwise auto-typed).";
" -j job-id[,N] Filter file N from the specified job (default is file 1)." = " -j job-id[,N] Filter file N from the specified job (default is file 1).";
" -l lang[,lang,...] Specify the output language(s) (locale)." = " -l lang[,lang,…] Specify the output language(s) (locale).";
" -m Use the ModelName value as the filename." = " -m Use the ModelName value as the filename.";
" -m mime/type Set output MIME type (otherwise application/pdf)." = " -m mime/type Set output MIME type (otherwise application/pdf).";
" -n copies Set number of copies." = " -n copies Set number of copies.";
" -o filename.drv Set driver information file (otherwise ppdi.drv)." = " -o filename.drv Set driver information file (otherwise ppdi.drv).";
" -o filename.ppd[.gz] Set output file (otherwise stdout)." = " -o filename.ppd[.gz] Set output file (otherwise stdout).";
" -o name=value Set option(s)." = " -o name=value Set option(s).";
" -p filename.ppd Set PPD file." = " -p filename.ppd Set PPD file.";
" -t Test PPDs instead of generating them." = " -t Test PPDs instead of generating them.";
" -t title Set title." = " -t title Set title.";
" -u Remove the PPD file when finished." = " -u Remove the PPD file when finished.";
" -v Be verbose." = " -v Be verbose.";
" -z Compress PPD files using GNU zip." = " -z Compress PPD files using GNU zip.";
" FAIL" = " FAIL";
" PASS" = " PASS";
"! expression Unary NOT of expression" = "! expression Unary NOT of expression";
"\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6).";
"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6).";
"\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4).";
"\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4).";
"\"%s\": Bad boolean value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolean value %d (RFC 8011 section 5.1.21).";
"\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8).";
"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8).";
"\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5).";
"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4).";
"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4).";
"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10).";
"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10).";
"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3).";
"\"%s\": Bad name value \"%s\" - bad control character (PWG 5100.14 section 8.1)." = "“%s”: Bad name value “%s” - bad control character (PWG 5100.14 section 8.1).";
"\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3).";
"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9).";
"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9).";
"\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20).";
"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14).";
"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16).";
"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16).";
"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16).";
"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2).";
"\"%s\": Bad text value \"%s\" - bad control character (PWG 5100.14 section 8.3)." = "“%s”: Bad text value “%s” - bad control character (PWG 5100.14 section 8.3).";
"\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2).";
"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7).";
"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7).";
"\"requesting-user-name\" attribute in wrong group." = "“requesting-user-name” attribute in wrong group.";
"\"requesting-user-name\" attribute with wrong syntax." = "“requesting-user-name” attribute with wrong syntax.";
"%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes";
"%d x %d mm" = "%d x %d mm";
"%g x %g \"" = "%g x %g ″";
"%s (%s)" = "%s (%s)";
"%s (%s, %s)" = "%s (%s, %s)";
"%s (Borderless)" = "%s (Borderless)";
"%s (Borderless, %s)" = "%s (Borderless, %s)";
"%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)";
"%s accepting requests since %s" = "%s accepting requests since %s";
"%s cannot be changed." = "%s cannot be changed.";
"%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc.";
"%s is not ready" = "%s is not ready";
"%s is ready" = "%s is ready";
"%s is ready and printing" = "%s is ready and printing";
"%s job-id user title copies options [file]" = "%s job-id user title copies options [file]";
"%s not accepting requests since %s -" = "%s not accepting requests since %s -";
"%s not supported." = "%s not supported.";
"%s/%s accepting requests since %s" = "%s/%s accepting requests since %s";
"%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -";
"%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]";
// TRANSLATORS: Message is "subject: error"
"%s: %s" = "%s: %s";
"%s: %s failed: %s" = "%s: %s failed: %s";
"%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”.";
"%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”.";
"%s: Don't know what to do." = "%s: Don’t know what to do.";
"%s: Error - %s" = "%s: Error - %s";
"%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”.";
"%s: Error - The printer or class does not exist." = "%s: Error - The printer or class does not exist.";
"%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name.";
"%s: Error - bad job ID." = "%s: Error - bad job ID.";
"%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously.";
"%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided.";
"%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more.";
"%s: Error - expected \"username\" after \"-U\" option." = "%s: Error - expected “username” after “-U” option.";
"%s: Error - expected PPD file after \"-%c\" option." = "%s: Error - expected PPD file after “-%c” option.";
"%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option.";
"%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option.";
"%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option.";
"%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option.";
"%s: Error - expected destination MIME type after \"-m\" option." = "%s: Error - expected destination MIME type after “-m” option.";
"%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option.";
"%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option.";
"%s: Error - expected filename after \"-c\" option." = "%s: Error - expected filename after “-c” option.";
"%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option.";
"%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option.";
"%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option.";
"%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option.";
"%s: Error - expected input file after \"-f\" option." = "%s: Error - expected input file after “-f” option.";
"%s: Error - expected job-id after \"-j\" option." = "%s: Error - expected job-id after “-j” option.";
"%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option.";
"%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option.";
"%s: Error - expected name=value after \"-a\" option." = "%s: Error - expected name=value after “-a” option.";
"%s: Error - expected name=value after \"-o\" option." = "%s: Error - expected name=value after “-o” option.";
"%s: Error - expected number of copies after \"-n\" option." = "%s: Error - expected number of copies after “-n” option.";
"%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option.";
"%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option.";
"%s: Error - expected printer name after \"-d\" option." = "%s: Error - expected printer name after “-d” option.";
"%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option.";
"%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option.";
"%s: Error - expected source MIME type after \"-i\" option." = "%s: Error - expected source MIME type after “-i” option.";
"%s: Error - expected title after \"-%c\" option." = "%s: Error - expected title after “-%c” option.";
"%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option.";
"%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option.";
"%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option.";
"%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option.";
"%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, or “all” after “-W” option.";
"%s: Error - no default destination available." = "%s: Error - no default destination available.";
"%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100.";
"%s: Error - scheduler not responding." = "%s: Error - scheduler not responding.";
"%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”.";
"%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s";
"%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s.";
"%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”.";
"%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”.";
"%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”.";
"%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”.";
"%s: Error - unknown option \"-%c\"." = "%s: Error - unknown option “-%c”.";
"%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option.";
"%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”.";
"%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”.";
"%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”.";
"%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”.";
"%s: Missing version for \"-V\"." = "%s: Missing version for “-V”.";
"%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”.";
"%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s.";
"%s: Operation failed: %s" = "%s: Operation failed: %s";
"%s: Sorry, no encryption support." = "%s: Sorry, no encryption support.";
"%s: Unable to connect to \"%s:%d\": %s" = "%s: Unable to connect to “%s:%d”: %s";
"%s: Unable to connect to server." = "%s: Unable to connect to server.";
"%s: Unable to contact server." = "%s: Unable to contact server.";
"%s: Unable to create PPD file: %s" = "%s: Unable to create PPD file: %s";
"%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”.";
"%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s";
"%s: Unable to open %s: %s" = "%s: Unable to open %s: %s";
"%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d.";
"%s: Unable to query printer: %s" = "%s: Unable to query printer: %s";
"%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”.";
"%s: Unable to resolve \"%s\"." = "%s: Unable to resolve “%s”.";
"%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”.";
"%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”.";
"%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s.";
"%s: Unknown option \"%c\"." = "%s: Unknown option “%c”.";
"%s: Unknown option \"%s\"." = "%s: Unknown option “%s”.";
"%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”.";
"%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s.";
"%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct.";
"%s: Warning - character set option ignored." = "%s: Warning - character set option ignored.";
"%s: Warning - content type option ignored." = "%s: Warning - content type option ignored.";
"%s: Warning - form option ignored." = "%s: Warning - form option ignored.";
"%s: Warning - mode option ignored." = "%s: Warning - mode option ignored.";
"( expressions ) Group expressions" = "( expressions ) Group expressions";
"- Cancel all jobs" = "- Cancel all jobs";
"-# num-copies Specify the number of copies to print" = "-# num-copies Specify the number of copies to print";
"--[no-]debug-logging Turn debug logging on/off" = "--[no-]debug-logging Turn debug logging on/off";
"--[no-]remote-admin Turn remote administration on/off" = "--[no-]remote-admin Turn remote administration on/off";
"--[no-]remote-any Allow/prevent access from the Internet" = "--[no-]remote-any Allow/prevent access from the Internet";
"--[no-]share-printers Turn printer sharing on/off" = "--[no-]share-printers Turn printer sharing on/off";
"--[no-]user-cancel-any Allow/prevent users to cancel any job" = "--[no-]user-cancel-any Allow/prevent users to cancel any job";
"--device-id device-id Show models matching the given IEEE 1284 device ID" = "--device-id device-id Show models matching the given IEEE 1284 device ID";
"--domain regex Match domain to regular expression" = "--domain regex Match domain to regular expression";
"--exclude-schemes scheme-list\n Exclude the specified URI schemes" = "--exclude-schemes scheme-list\n Exclude the specified URI schemes";
"--exec utility [argument ...] ;\n Execute program if true" = "--exec utility [argument …] ;\n Execute program if true";
"--false Always false" = "--false Always false";
"--help Show program help" = "--help Show program help";
"--hold Hold new jobs" = "--hold Hold new jobs";
"--host regex Match hostname to regular expression" = "--host regex Match hostname to regular expression";
"--include-schemes scheme-list\n Include only the specified URI schemes" = "--include-schemes scheme-list\n Include only the specified URI schemes";
"--ippserver filename Produce ippserver attribute file" = "--ippserver filename Produce ippserver attribute file";
"--language locale Show models matching the given locale" = "--language locale Show models matching the given locale";
"--literal-name name Match service name to literal name value" = "--literal-name name Match service name to literal name value";
"--local True if service is local" = "--local True if service is local";
"--ls List attributes" = "--ls List attributes";
"--make-and-model name Show models matching the given make and model name" = "--make-and-model name Show models matching the given make and model name";
"--name regex Match service name to regular expression" = "--name regex Match service name to regular expression";
"--no-web-forms Disable web forms for media and supplies" = "--no-web-forms Disable web forms for media and supplies";
"--not expression Unary NOT of expression" = "--not expression Unary NOT of expression";
"--pam-service service Use the named PAM service" = "--pam-service service Use the named PAM service";
"--path regex Match resource path to regular expression" = "--path regex Match resource path to regular expression";
"--port number[-number] Match port to number or range" = "--port number[-number] Match port to number or range";
"--print Print URI if true" = "--print Print URI if true";
"--print-name Print service name if true" = "--print-name Print service name if true";
"--product name Show models matching the given PostScript product" = "--product name Show models matching the given PostScript product";
"--quiet Quietly report match via exit code" = "--quiet Quietly report match via exit code";
"--release Release previously held jobs" = "--release Release previously held jobs";
"--remote True if service is remote" = "--remote True if service is remote";
"--stop-after-include-error\n Stop tests after a failed INCLUDE" = "--stop-after-include-error\n Stop tests after a failed INCLUDE";
"--timeout seconds Specify the maximum number of seconds to discover devices" = "--timeout seconds Specify the maximum number of seconds to discover devices";
"--true Always true" = "--true Always true";
"--txt key True if the TXT record contains the key" = "--txt key True if the TXT record contains the key";
"--txt-* regex Match TXT record key to regular expression" = "--txt-* regex Match TXT record key to regular expression";
"--uri regex Match URI to regular expression" = "--uri regex Match URI to regular expression";
"--version Show program version" = "--version Show program version";
"--version Show version" = "--version Show version";
"-1" = "-1";
"-10" = "-10";
"-100" = "-100";
"-105" = "-105";
"-11" = "-11";
"-110" = "-110";
"-115" = "-115";
"-12" = "-12";
"-120" = "-120";
"-13" = "-13";
"-14" = "-14";
"-15" = "-15";
"-2" = "-2";
"-2 Set 2-sided printing support (default=1-sided)" = "-2 Set 2-sided printing support (default=1-sided)";
"-20" = "-20";
"-25" = "-25";
"-3" = "-3";
"-30" = "-30";
"-35" = "-35";
"-4" = "-4";
"-4 Connect using IPv4" = "-4 Connect using IPv4";
"-40" = "-40";
"-45" = "-45";
"-5" = "-5";
"-50" = "-50";
"-55" = "-55";
"-6" = "-6";
"-6 Connect using IPv6" = "-6 Connect using IPv6";
"-60" = "-60";
"-65" = "-65";
"-7" = "-7";
"-70" = "-70";
"-75" = "-75";
"-8" = "-8";
"-80" = "-80";
"-85" = "-85";
"-9" = "-9";
"-90" = "-90";
"-95" = "-95";
"-A Enable authentication" = "-A Enable authentication";
"-C Send requests using chunking (default)" = "-C Send requests using chunking (default)";
"-D description Specify the textual description of the printer" = "-D description Specify the textual description of the printer";
"-D device-uri Set the device URI for the printer" = "-D device-uri Set the device URI for the printer";
"-E Enable and accept jobs on the printer (after -p)" = "-E Enable and accept jobs on the printer (after -p)";
"-E Encrypt the connection to the server" = "-E Encrypt the connection to the server";
"-E Test with encryption using HTTP Upgrade to TLS" = "-E Test with encryption using HTTP Upgrade to TLS";
"-F Run in the foreground but detach from console." = "-F Run in the foreground but detach from console.";
"-F output-type/subtype Set the output format for the printer" = "-F output-type/subtype Set the output format for the printer";
"-H Show the default server and port" = "-H Show the default server and port";
"-H HH:MM Hold the job until the specified UTC time" = "-H HH:MM Hold the job until the specified UTC time";
"-H hold Hold the job until released/resumed" = "-H hold Hold the job until released/resumed";
"-H immediate Print the job as soon as possible" = "-H immediate Print the job as soon as possible";
"-H restart Reprint the job" = "-H restart Reprint the job";
"-H resume Resume a held job" = "-H resume Resume a held job";
"-H server[:port] Connect to the named server and port" = "-H server[:port] Connect to the named server and port";
"-I Ignore errors" = "-I Ignore errors";
"-I {filename,filters,none,profiles}\n Ignore specific warnings" = "-I {filename,filters,none,profiles}\n Ignore specific warnings";
"-K keypath Set location of server X.509 certificates and keys." = "-K keypath Set location of server X.509 certificates and keys.";
"-L Send requests using content-length" = "-L Send requests using content-length";
"-L location Specify the textual location of the printer" = "-L location Specify the textual location of the printer";
"-M manufacturer Set manufacturer name (default=Test)" = "-M manufacturer Set manufacturer name (default=Test)";
"-N name Match service name to literal name value" = "-N name Match service name to literal name value";
"-P destination Show status for the specified destination" = "-P destination Show status for the specified destination";
"-P destination Specify the destination" = "-P destination Specify the destination";
"-P filename.plist Produce XML plist to a file and test report to standard output" = "-P filename.plist Produce XML plist to a file and test report to standard output";
"-P filename.ppd Load printer attributes from PPD file" = "-P filename.ppd Load printer attributes from PPD file";
"-P number[-number] Match port to number or range" = "-P number[-number] Match port to number or range";
"-P page-list Specify a list of pages to print" = "-P page-list Specify a list of pages to print";
"-R Show the ranking of jobs" = "-R Show the ranking of jobs";
"-R name-default Remove the default value for the named option" = "-R name-default Remove the default value for the named option";
"-R root-directory Set alternate root" = "-R root-directory Set alternate root";
"-S Test with encryption using HTTPS" = "-S Test with encryption using HTTPS";
"-S filename.strings Set strings file" = "-S filename.strings Set strings file";
"-T seconds Set the browse timeout in seconds" = "-T seconds Set the browse timeout in seconds";
"-T seconds Set the receive/send timeout in seconds" = "-T seconds Set the receive/send timeout in seconds";
"-T title Specify the job title" = "-T title Specify the job title";
"-U username Specify the username to use for authentication" = "-U username Specify the username to use for authentication";
"-U username Specify username to use for authentication" = "-U username Specify username to use for authentication";
"-V version Set default IPP version" = "-V version Set default IPP version";
"-W completed Show completed jobs" = "-W completed Show completed jobs";
"-W not-completed Show pending jobs" = "-W not-completed Show pending jobs";
"-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors" = "-W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}\n Issue warnings instead of errors";
"-X Produce XML plist instead of plain text" = "-X Produce XML plist instead of plain text";
"-a Cancel all jobs" = "-a Cancel all jobs";
"-a Show jobs on all destinations" = "-a Show jobs on all destinations";
"-a [destination(s)] Show the accepting state of destinations" = "-a [destination(s)] Show the accepting state of destinations";
"-a filename.conf Load printer attributes from conf file" = "-a filename.conf Load printer attributes from conf file";
"-c Make a copy of the print file(s)" = "-c Make a copy of the print file(s)";
"-c Produce CSV output" = "-c Produce CSV output";
"-c [class(es)] Show classes and their member printers" = "-c [class(es)] Show classes and their member printers";
"-c class Add the named destination to a class" = "-c class Add the named destination to a class";
"-c command Set print command" = "-c command Set print command";
"-c cupsd.conf Set cupsd.conf file to use." = "-c cupsd.conf Set cupsd.conf file to use.";
"-d Show the default destination" = "-d Show the default destination";
"-d destination Set default destination" = "-d destination Set default destination";
"-d destination Set the named destination as the server default" = "-d destination Set the named destination as the server default";
"-d destination Specify the destination" = "-d destination Specify the destination";
"-d name=value Set named variable to value" = "-d name=value Set named variable to value";
"-d regex Match domain to regular expression" = "-d regex Match domain to regular expression";
"-d spool-directory Set spool directory" = "-d spool-directory Set spool directory";
"-e Show available destinations on the network" = "-e Show available destinations on the network";
"-f Run in the foreground." = "-f Run in the foreground.";
"-f filename Set default request filename" = "-f filename Set default request filename";
"-f type/subtype[,...] Set supported file types" = "-f type/subtype[,…] Set supported file types";
"-h Show this usage message." = "-h Show this usage message.";
"-h Validate HTTP response headers" = "-h Validate HTTP response headers";
"-h regex Match hostname to regular expression" = "-h regex Match hostname to regular expression";
"-h server[:port] Connect to the named server and port" = "-h server[:port] Connect to the named server and port";
"-i iconfile.png[,...] Set icon file(s)" = "-i iconfile.png[,…] Set icon file(s)";
"-i id Specify an existing job ID to modify" = "-i id Specify an existing job ID to modify";
"-i ppd-file Specify a PPD file for the printer" = "-i ppd-file Specify a PPD file for the printer";
"-i seconds Repeat the last file with the given time interval" = "-i seconds Repeat the last file with the given time interval";
"-k Keep job spool files" = "-k Keep job spool files";
"-l List attributes" = "-l List attributes";
"-l Produce plain text output" = "-l Produce plain text output";
"-l Run cupsd on demand." = "-l Run cupsd on demand.";
"-l Show supported options and values" = "-l Show supported options and values";
"-l Show verbose (long) output" = "-l Show verbose (long) output";
"-l location Set location of printer" = "-l location Set location of printer";
"-m Send an email notification when the job completes" = "-m Send an email notification when the job completes";
"-m Show models" = "-m Show models";
"-m everywhere Specify the printer is compatible with IPP Everywhere" = "-m everywhere Specify the printer is compatible with IPP Everywhere";
"-m model Set model name (default=Printer)" = "-m model Set model name (default=Printer)";
"-m model Specify a standard model/PPD file for the printer" = "-m model Specify a standard model/PPD file for the printer";
"-n count Repeat the last file the given number of times" = "-n count Repeat the last file the given number of times";
"-n hostname Set hostname for printer" = "-n hostname Set hostname for printer";
"-n num-copies Specify the number of copies to print" = "-n num-copies Specify the number of copies to print";
"-n regex Match service name to regular expression" = "-n regex Match service name to regular expression";
"-o Name=Value Specify the default value for the named PPD option " = "-o Name=Value Specify the default value for the named PPD option ";
"-o [destination(s)] Show jobs" = "-o [destination(s)] Show jobs";
"-o cupsIPPSupplies=false\n Disable supply level reporting via IPP" = "-o cupsIPPSupplies=false\n Disable supply level reporting via IPP";
"-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP" = "-o cupsSNMPSupplies=false\n Disable supply level reporting via SNMP";
"-o job-k-limit=N Specify the kilobyte limit for per-user quotas" = "-o job-k-limit=N Specify the kilobyte limit for per-user quotas";
"-o job-page-limit=N Specify the page limit for per-user quotas" = "-o job-page-limit=N Specify the page limit for per-user quotas";
"-o job-quota-period=N Specify the per-user quota period in seconds" = "-o job-quota-period=N Specify the per-user quota period in seconds";
"-o job-sheets=standard Print a banner page with the job" = "-o job-sheets=standard Print a banner page with the job";
"-o media=size Specify the media size to use" = "-o media=size Specify the media size to use";
"-o name-default=value Specify the default value for the named option" = "-o name-default=value Specify the default value for the named option";
"-o name[=value] Set default option and value" = "-o name[=value] Set default option and value";
"-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)" = "-o number-up=N Specify that input pages should be printed N-up (1, 2, 4, 6, 9, and 16 are supported)";
"-o option[=value] Specify a printer-specific option" = "-o option[=value] Specify a printer-specific option";
"-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation" = "-o orientation-requested=N\n Specify portrait (3) or landscape (4) orientation";
"-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)" = "-o print-quality=N Specify the print quality - draft (3), normal (4), or best (5)";
"-o printer-error-policy=name\n Specify the printer error policy" = "-o printer-error-policy=name\n Specify the printer error policy";
"-o printer-is-shared=true\n Share the printer" = "-o printer-is-shared=true\n Share the printer";
"-o printer-op-policy=name\n Specify the printer operation policy" = "-o printer-op-policy=name\n Specify the printer operation policy";
"-o sides=one-sided Specify 1-sided printing" = "-o sides=one-sided Specify 1-sided printing";
"-o sides=two-sided-long-edge\n Specify 2-sided portrait printing" = "-o sides=two-sided-long-edge\n Specify 2-sided portrait printing";
"-o sides=two-sided-short-edge\n Specify 2-sided landscape printing" = "-o sides=two-sided-short-edge\n Specify 2-sided landscape printing";
"-p Print URI if true" = "-p Print URI if true";
"-p [printer(s)] Show the processing state of destinations" = "-p [printer(s)] Show the processing state of destinations";
"-p destination Specify a destination" = "-p destination Specify a destination";
"-p destination Specify/add the named destination" = "-p destination Specify/add the named destination";
"-p port Set port number for printer" = "-p port Set port number for printer";
"-q Quietly report match via exit code" = "-q Quietly report match via exit code";
"-q Run silently" = "-q Run silently";
"-q Specify the job should be held for printing" = "-q Specify the job should be held for printing";
"-q priority Specify the priority from low (1) to high (100)" = "-q priority Specify the priority from low (1) to high (100)";
"-r Remove the file(s) after submission" = "-r Remove the file(s) after submission";
"-r Show whether the CUPS server is running" = "-r Show whether the CUPS server is running";
"-r True if service is remote" = "-r True if service is remote";
"-r Use 'relaxed' open mode" = "-r Use ‘relaxed’ open mode";
"-r class Remove the named destination from a class" = "-r class Remove the named destination from a class";
"-r reason Specify a reason message that others can see" = "-r reason Specify a reason message that others can see";
"-r subtype,[subtype] Set DNS-SD service subtype" = "-r subtype,[subtype] Set DNS-SD service subtype";
"-s Be silent" = "-s Be silent";
"-s Print service name if true" = "-s Print service name if true";
"-s Show a status summary" = "-s Show a status summary";
"-s cups-files.conf Set cups-files.conf file to use." = "-s cups-files.conf Set cups-files.conf file to use.";
"-s speed[,color-speed] Set speed in pages per minute" = "-s speed[,color-speed] Set speed in pages per minute";
"-t Produce a test report" = "-t Produce a test report";
"-t Show all status information" = "-t Show all status information";
"-t Test the configuration file." = "-t Test the configuration file.";
"-t key True if the TXT record contains the key" = "-t key True if the TXT record contains the key";
"-t title Specify the job title" = "-t title Specify the job title";
"-u [user(s)] Show jobs queued by the current or specified users" = "-u [user(s)] Show jobs queued by the current or specified users";
"-u allow:all Allow all users to print" = "-u allow:all Allow all users to print";
"-u allow:list Allow the list of users or groups (@name) to print" = "-u allow:list Allow the list of users or groups (@name) to print";
"-u deny:list Prevent the list of users or groups (@name) to print" = "-u deny:list Prevent the list of users or groups (@name) to print";
"-u owner Specify the owner to use for jobs" = "-u owner Specify the owner to use for jobs";
"-u regex Match URI to regular expression" = "-u regex Match URI to regular expression";
"-v Be verbose" = "-v Be verbose";
"-v Show devices" = "-v Show devices";
"-v [printer(s)] Show the devices for each destination" = "-v [printer(s)] Show the devices for each destination";
"-v device-uri Specify the device URI for the printer" = "-v device-uri Specify the device URI for the printer";
"-vv Be very verbose" = "-vv Be very verbose";
"-x Purge jobs rather than just canceling" = "-x Purge jobs rather than just canceling";
"-x destination Remove default options for destination" = "-x destination Remove default options for destination";
"-x destination Remove the named destination" = "-x destination Remove the named destination";
"-x utility [argument ...] ;\n Execute program if true" = "-x utility [argument …] ;\n Execute program if true";
"/etc/cups/lpoptions file names default destination that does not exist." = "/etc/cups/lpoptions file names default destination that does not exist.";
"0" = "0";
"1" = "1";
"1 inch/sec." = "1 inch/sec.";
"1.25x0.25\"" = "1.25x0.25″";
"1.25x2.25\"" = "1.25x2.25″";
"1.5 inch/sec." = "1.5 inch/sec.";
"1.50x0.25\"" = "1.50x0.25″";
"1.50x0.50\"" = "1.50x0.50″";
"1.50x1.00\"" = "1.50x1.00″";
"1.50x2.00\"" = "1.50x2.00″";
"10" = "10";
"10 inches/sec." = "10 inches/sec.";
"10 x 11" = "10 x 11";
"10 x 13" = "10 x 13";
"10 x 14" = "10 x 14";
"100" = "100";
"100 mm/sec." = "100 mm/sec.";
"105" = "105";
"11" = "11";
"11 inches/sec." = "11 inches/sec.";
"110" = "110";
"115" = "115";
"12" = "12";
"12 inches/sec." = "12 inches/sec.";
"12 x 11" = "12 x 11";
"120" = "120";
"120 mm/sec." = "120 mm/sec.";
"120x60dpi" = "120x60dpi";
"120x72dpi" = "120x72dpi";
"13" = "13";
"136dpi" = "136dpi";
"14" = "14";
"15" = "15";
"15 mm/sec." = "15 mm/sec.";
"15 x 11" = "15 x 11";
"150 mm/sec." = "150 mm/sec.";
"150dpi" = "150dpi";
"16" = "16";
"17" = "17";
"18" = "18";
"180dpi" = "180dpi";
"19" = "19";
"2" = "2";
"2 inches/sec." = "2 inches/sec.";
"2-Sided Printing" = "2-Sided Printing";
"2.00x0.37\"" = "2.00x0.37″";
"2.00x0.50\"" = "2.00x0.50″";
"2.00x1.00\"" = "2.00x1.00″";
"2.00x1.25\"" = "2.00x1.25″";
"2.00x2.00\"" = "2.00x2.00″";
"2.00x3.00\"" = "2.00x3.00″";
"2.00x4.00\"" = "2.00x4.00″";
"2.00x5.50\"" = "2.00x5.50″";
"2.25x0.50\"" = "2.25x0.50″";
"2.25x1.25\"" = "2.25x1.25″";
"2.25x4.00\"" = "2.25x4.00″";
"2.25x5.50\"" = "2.25x5.50″";
"2.38x5.50\"" = "2.38x5.50″";
"2.5 inches/sec." = "2.5 inches/sec.";
"2.50x1.00\"" = "2.50x1.00″";
"2.50x2.00\"" = "2.50x2.00″";
"2.75x1.25\"" = "2.75x1.25″";
"2.9 x 1\"" = "2.9 x 1″";
"20" = "20";
"20 mm/sec." = "20 mm/sec.";
"200 mm/sec." = "200 mm/sec.";
"203dpi" = "203dpi";
"21" = "21";
"22" = "22";
"23" = "23";
"24" = "24";
"24-Pin Series" = "24-Pin Series";
"240x72dpi" = "240x72dpi";
"25" = "25";
"250 mm/sec." = "250 mm/sec.";
"26" = "26";
"27" = "27";
"28" = "28";
"29" = "29";
"3" = "3";
"3 inches/sec." = "3 inches/sec.";
"3 x 5" = "3 x 5";
"3.00x1.00\"" = "3.00x1.00″";
"3.00x1.25\"" = "3.00x1.25″";
"3.00x2.00\"" = "3.00x2.00″";
"3.00x3.00\"" = "3.00x3.00″";
"3.00x4.00\"" = "3.00x4.00″";
"3.00x5.00\"" = "3.00x5.00″";
"3.00x6.00\"" = "3.00x6.00″";
"3.00x8.00\"" = "3.00x8.00″";
"3.25x2.00\"" = "3.25x2.00″";
"3.25x5.00\"" = "3.25x5.00″";
"3.25x5.50\"" = "3.25x5.50″";
"3.25x5.83\"" = "3.25x5.83″";
"3.25x7.83\"" = "3.25x7.83″";
"3.5 x 5" = "3.5 x 5";
"3.5\" Disk" = "3.5″ Disk";
"3.50x1.00\"" = "3.50x1.00″";
"30" = "30";
"30 mm/sec." = "30 mm/sec.";
"300 mm/sec." = "300 mm/sec.";
"300dpi" = "300dpi";
"30859 Paint Can Label" = "30859 Paint Can Label";
"35" = "35";
"360dpi" = "360dpi";
"360x180dpi" = "360x180dpi";
"4" = "4";
"4 inches/sec." = "4 inches/sec.";
"4.00x1.00\"" = "4.00x1.00″";
"4.00x13.00\"" = "4.00x13.00″";
"4.00x2.00\"" = "4.00x2.00″";
"4.00x2.50\"" = "4.00x2.50″";
"4.00x3.00\"" = "4.00x3.00″";
"4.00x4.00\"" = "4.00x4.00″";
"4.00x5.00\"" = "4.00x5.00″";
"4.00x6.00\"" = "4.00x6.00″";
"4.00x6.50\"" = "4.00x6.50″";
"4.00x8.00\"" = "4.00x8.00″";
"40" = "40";
"40 mm/sec." = "40 mm/sec.";
"45" = "45";
"5" = "5";
"5 inches/sec." = "5 inches/sec.";
"5 x 7" = "5 x 7";
"50" = "50";
"55" = "55";
"6" = "6";
"6 inches/sec." = "6 inches/sec.";
"6.00x1.00\"" = "6.00x1.00″";
"6.00x2.00\"" = "6.00x2.00″";
"6.00x3.00\"" = "6.00x3.00″";
"6.00x4.00\"" = "6.00x4.00″";
"6.00x5.00\"" = "6.00x5.00″";
"6.00x6.00\"" = "6.00x6.00″";
"6.00x6.50\"" = "6.00x6.50″";
"6.00x8.00\"" = "6.00x8.00″";
"60" = "60";
"60 mm/sec." = "60 mm/sec.";
"600dpi" = "600dpi";
"60dpi" = "60dpi";
"60x72dpi" = "60x72dpi";
"65" = "65";
"7" = "7";
"7 inches/sec." = "7 inches/sec.";
"7 x 9" = "7 x 9";
"70" = "70";
"75" = "75";
"8" = "8";
"8 inches/sec." = "8 inches/sec.";
"8 x 10" = "8 x 10";
"8.00x1.00\"" = "8.00x1.00″";
"8.00x2.00\"" = "8.00x2.00″";
"8.00x3.00\"" = "8.00x3.00″";
"8.00x4.00\"" = "8.00x4.00″";
"8.00x5.00\"" = "8.00x5.00″";
"8.00x6.00\"" = "8.00x6.00″";
"8.00x6.50\"" = "8.00x6.50″";
"8.26x1.00\"" = "8.26x1.00″";
"80" = "80";
"80 mm/sec." = "80 mm/sec.";
"80x50mm" = "80x50mm";
"85" = "85";
"9" = "9";
"9 inches/sec." = "9 inches/sec.";
"9 x 11" = "9 x 11";
"9 x 12" = "9 x 12";
"9-Pin Series" = "9-Pin Series";
"90" = "90";
"95" = "95";
"?Invalid help command unknown." = "?Invalid help command unknown.";
"A class named \"%s\" already exists." = "A class named “%s” already exists.";
"A printer named \"%s\" already exists." = "A printer named “%s” already exists.";
"A0" = "A0";
"A0 Long Edge" = "A0 Long Edge";
"A1" = "A1";
"A1 Long Edge" = "A1 Long Edge";
"A10" = "A10";
"A2" = "A2";
"A2 Long Edge" = "A2 Long Edge";
"A3" = "A3";
"A3 Long Edge" = "A3 Long Edge";
"A3 Oversize" = "A3 Oversize";
"A3 Oversize Long Edge" = "A3 Oversize Long Edge";
"A4" = "A4";
"A4 Long Edge" = "A4 Long Edge";
"A4 Oversize" = "A4 Oversize";
"A4 Small" = "A4 Small";
"A5" = "A5";
"A5 Long Edge" = "A5 Long Edge";
"A5 Oversize" = "A5 Oversize";
"A6" = "A6";
"A6 Long Edge" = "A6 Long Edge";
"A7" = "A7";
"A8" = "A8";
"A9" = "A9";
"ANSI A" = "ANSI A";
"ANSI B" = "ANSI B";
"ANSI C" = "ANSI C";
"ANSI D" = "ANSI D";
"ANSI E" = "ANSI E";
"ARCH C" = "ARCH C";
"ARCH C Long Edge" = "ARCH C Long Edge";
"ARCH D" = "ARCH D";
"ARCH D Long Edge" = "ARCH D Long Edge";
"ARCH E" = "ARCH E";
"ARCH E Long Edge" = "ARCH E Long Edge";
"Accept Jobs" = "Accept Jobs";
"Accepted" = "Accepted";
"Add Class" = "Add Class";
"Add Printer" = "Add Printer";
"Address" = "Address";
"Administration" = "Administration";
"Always" = "Always";
"AppSocket/HP JetDirect" = "AppSocket/HP JetDirect";
"Applicator" = "Applicator";
"Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d.";
"Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group.";
"Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type.";
"Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x).";
"B0" = "B0";
"B1" = "B1";
"B10" = "B10";
"B2" = "B2";
"B3" = "B3";
"B4" = "B4";
"B5" = "B5";
"B5 Oversize" = "B5 Oversize";
"B6" = "B6";
"B7" = "B7";
"B8" = "B8";
"B9" = "B9";
"Bad \"printer-id\" value %d." = "Bad “printer-id” value %d.";
"Bad '%s' value." = "Bad ‘%s’ value.";
"Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”.";
"Bad CloseUI/JCLCloseUI" = "Bad CloseUI/JCLCloseUI";
"Bad NULL dests pointer" = "Bad NULL dests pointer";
"Bad OpenGroup" = "Bad OpenGroup";
"Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI";
"Bad OrderDependency" = "Bad OrderDependency";
"Bad PPD cache file." = "Bad PPD cache file.";
"Bad PPD file." = "Bad PPD file.";
"Bad Request" = "Bad Request";
"Bad SNMP version number" = "Bad SNMP version number";
"Bad UIConstraints" = "Bad UIConstraints";
"Bad URI." = "Bad URI.";
"Bad arguments to function" = "Bad arguments to function";
"Bad copies value %d." = "Bad copies value %d.";
"Bad custom parameter" = "Bad custom parameter";
"Bad device-uri \"%s\"." = "Bad device-uri “%s”.";
"Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”.";
"Bad document-format \"%s\"." = "Bad document-format “%s”.";
"Bad document-format-default \"%s\"." = "Bad document-format-default “%s”.";
"Bad filename buffer" = "Bad filename buffer";
"Bad hostname/address in URI" = "Bad hostname/address in URI";
"Bad job-name value: %s" = "Bad job-name value: %s";
"Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count.";
"Bad job-priority value." = "Bad job-priority value.";
"Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”.";
"Bad job-sheets value type." = "Bad job-sheets value type.";
"Bad job-state value." = "Bad job-state value.";
"Bad job-uri \"%s\"." = "Bad job-uri “%s”.";
"Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”.";
"Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”.";
"Bad notify-user-data \"%s\"." = "Bad notify-user-data “%s”.";
"Bad number-up value %d." = "Bad number-up value %d.";
"Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d.";
"Bad port number in URI" = "Bad port number in URI";
"Bad port-monitor \"%s\"." = "Bad port-monitor “%s”.";
"Bad printer-state value %d." = "Bad printer-state value %d.";
"Bad printer-uri." = "Bad printer-uri.";
"Bad request ID %d." = "Bad request ID %d.";
"Bad request version number %d.%d." = "Bad request version number %d.%d.";
"Bad resource in URI" = "Bad resource in URI";
"Bad scheme in URI" = "Bad scheme in URI";
"Bad username in URI" = "Bad username in URI";
"Bad value string" = "Bad value string";
"Bad/empty URI" = "Bad/empty URI";
"Banners" = "Banners";
"Bond Paper" = "Bond Paper";
"Booklet" = "Booklet";
"Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”.";
"Buffer overflow detected, aborting." = "Buffer overflow detected, aborting.";
"CMYK" = "CMYK";
"CPCL Label Printer" = "CPCL Label Printer";
"Cancel Jobs" = "Cancel Jobs";
"Canceling print job." = "Canceling print job.";
"Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues.";
"Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer.";
"Cassette" = "Cassette";
"Change Settings" = "Change Settings";
"Character set \"%s\" not supported." = "Character set “%s” not supported.";
"Classes" = "Classes";
"Clean Print Heads" = "Clean Print Heads";
"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute.";
"Color" = "Color";
"Color Mode" = "Color Mode";
"Commands may be abbreviated. Commands are:\n\nexit help quit status ?" = "Commands may be abbreviated. Commands are:\n\nexit help quit status ?";
"Community name uses indefinite length" = "Community name uses indefinite length";
"Connected to printer." = "Connected to printer.";
"Connecting to printer." = "Connecting to printer.";
"Continue" = "Continue";
"Continuous" = "Continuous";
"Control file sent successfully." = "Control file sent successfully.";
"Copying print data." = "Copying print data.";
"Created" = "Created";
"Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate.";
"Credentials have expired." = "Credentials have expired.";
"Custom" = "Custom";
"CustominCutInterval" = "CustominCutInterval";
"CustominTearInterval" = "CustominTearInterval";
"Cut" = "Cut";
"Cutter" = "Cutter";
"DYMO" = "DYMO";
"Dark" = "Dark";
"Darkness" = "Darkness";
"Data file sent successfully." = "Data file sent successfully.";
"Deep Color" = "Deep Color";
"Deep Gray" = "Deep Gray";
"Delete Class" = "Delete Class";
"Delete Printer" = "Delete Printer";
"DeskJet Series" = "DeskJet Series";
"Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs.";
"Device CMYK" = "Device CMYK";
"Device Gray" = "Device Gray";
"Device RGB" = "Device RGB";
"Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s" = "Device: uri = %s\n class = %s\n info = %s\n make-and-model = %s\n device-id = %s\n location = %s";
"Direct Thermal Media" = "Direct Thermal Media";
"Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path.";
"Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
"Directory \"%s\" is a file." = "Directory “%s” is a file.";
"Directory \"%s\" not available: %s" = "Directory “%s” not available: %s";
"Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d).";
"Disabled" = "Disabled";
"Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d.";
"Draft" = "Draft";
"Duplexer" = "Duplexer";
"EPL1 Label Printer" = "EPL1 Label Printer";
"EPL2 Label Printer" = "EPL2 Label Printer";
"Edit Configuration File" = "Edit Configuration File";
"Encryption is not supported." = "Encryption is not supported.";
// TRANSLATORS: Banner/cover sheet after the print job.
"Ending Banner" = "Ending Banner";
"English" = "English";
"Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.";
"Envelope #10" = "Envelope #10";
"Envelope #11" = "Envelope #11";
"Envelope #12" = "Envelope #12";
"Envelope #14" = "Envelope #14";
"Envelope #9" = "Envelope #9";
"Envelope B4" = "Envelope B4";
"Envelope B5" = "Envelope B5";
"Envelope B6" = "Envelope B6";
"Envelope C0" = "Envelope C0";
"Envelope C1" = "Envelope C1";
"Envelope C2" = "Envelope C2";
"Envelope C3" = "Envelope C3";
"Envelope C4" = "Envelope C4";
"Envelope C5" = "Envelope C5";
"Envelope C6" = "Envelope C6";
"Envelope C65" = "Envelope C65";
"Envelope C7" = "Envelope C7";
"Envelope Choukei 3" = "Envelope Choukei 3";
"Envelope Choukei 3 Long Edge" = "Envelope Choukei 3 Long Edge";
"Envelope Choukei 4" = "Envelope Choukei 4";
"Envelope Choukei 4 Long Edge" = "Envelope Choukei 4 Long Edge";
"Envelope DL" = "Envelope DL";
"Envelope Feed" = "Envelope Feed";
"Envelope Invite" = "Envelope Invite";
"Envelope Italian" = "Envelope Italian";
"Envelope Kaku2" = "Envelope Kaku2";
"Envelope Kaku2 Long Edge" = "Envelope Kaku2 Long Edge";
"Envelope Kaku3" = "Envelope Kaku3";
"Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge";
"Envelope Monarch" = "Envelope Monarch";
"Envelope PRC1" = "Envelope PRC1";
"Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge";
"Envelope PRC10" = "Envelope PRC10";
"Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge";
"Envelope PRC2" = "Envelope PRC2";
"Envelope PRC2 Long Edge" = "Envelope PRC2 Long Edge";
"Envelope PRC3" = "Envelope PRC3";
"Envelope PRC3 Long Edge" = "Envelope PRC3 Long Edge";
"Envelope PRC4" = "Envelope PRC4";
"Envelope PRC4 Long Edge" = "Envelope PRC4 Long Edge";
"Envelope PRC5 Long Edge" = "Envelope PRC5 Long Edge";
"Envelope PRC5PRC5" = "Envelope PRC5PRC5";
"Envelope PRC6" = "Envelope PRC6";
"Envelope PRC6 Long Edge" = "Envelope PRC6 Long Edge";
"Envelope PRC7" = "Envelope PRC7";
"Envelope PRC7 Long Edge" = "Envelope PRC7 Long Edge";
"Envelope PRC8" = "Envelope PRC8";
"Envelope PRC8 Long Edge" = "Envelope PRC8 Long Edge";
"Envelope PRC9" = "Envelope PRC9";
"Envelope PRC9 Long Edge" = "Envelope PRC9 Long Edge";
"Envelope Personal" = "Envelope Personal";
"Envelope You4" = "Envelope You4";
"Envelope You4 Long Edge" = "Envelope You4 Long Edge";
"Environment Variables:" = "Environment Variables:";
"Epson" = "Epson";
"Error Policy" = "Error Policy";
"Error reading raster data." = "Error reading raster data.";
"Error sending raster data." = "Error sending raster data.";
"Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option.";
"European Fanfold" = "European Fanfold";
"European Fanfold Legal" = "European Fanfold Legal";
"Every 10 Labels" = "Every 10 Labels";
"Every 2 Labels" = "Every 2 Labels";
"Every 3 Labels" = "Every 3 Labels";
"Every 4 Labels" = "Every 4 Labels";
"Every 5 Labels" = "Every 5 Labels";
"Every 6 Labels" = "Every 6 Labels";
"Every 7 Labels" = "Every 7 Labels";
"Every 8 Labels" = "Every 8 Labels";
"Every 9 Labels" = "Every 9 Labels";
"Every Label" = "Every Label";
"Executive" = "Executive";
"Expectation Failed" = "Expectation Failed";
"Expressions:" = "Expressions:";
"Fast Grayscale" = "Fast Grayscale";
"File \"%s\" contains a relative path." = "File “%s” contains a relative path.";
"File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
"File \"%s\" is a directory." = "File “%s” is a directory.";
"File \"%s\" not available: %s" = "File “%s” not available: %s";
"File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d).";
"File Folder" = "File Folder";
"File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”.";
"Finished page %d." = "Finished page %d.";
"Finishing Preset" = "Finishing Preset";
"Fold" = "Fold";
"Folio" = "Folio";
"Forbidden" = "Forbidden";
"Found" = "Found";
"General" = "General";
"Generic" = "Generic";
"Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length";
"Glossy Paper" = "Glossy Paper";
"Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id.";
"GrayScale" = "GrayScale";
"Grayscale" = "Grayscale";
"HP" = "HP";
"Hanging Folder" = "Hanging Folder";
"Hash buffer too small." = "Hash buffer too small.";
"Help file not in index." = "Help file not in index.";
"High" = "High";
"IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags.";
"IPP attribute has no name." = "IPP attribute has no name.";
"IPP attribute is not a member of the message." = "IPP attribute is not a member of the message.";
"IPP begCollection value not 0 bytes." = "IPP begCollection value not 0 bytes.";
"IPP boolean value not 1 byte." = "IPP boolean value not 1 byte.";
"IPP date value not 11 bytes." = "IPP date value not 11 bytes.";
"IPP endCollection value not 0 bytes." = "IPP endCollection value not 0 bytes.";
"IPP enum value not 4 bytes." = "IPP enum value not 4 bytes.";
"IPP extension tag larger than 0x7FFFFFFF." = "IPP extension tag larger than 0x7FFFFFFF.";
"IPP integer value not 4 bytes." = "IPP integer value not 4 bytes.";
"IPP language length overflows value." = "IPP language length overflows value.";
"IPP language length too large." = "IPP language length too large.";
"IPP member name is not empty." = "IPP member name is not empty.";
"IPP memberName value is empty." = "IPP memberName value is empty.";
"IPP memberName with no attribute." = "IPP memberName with no attribute.";
"IPP name larger than 32767 bytes." = "IPP name larger than 32767 bytes.";
"IPP nameWithLanguage value less than minimum 4 bytes." = "IPP nameWithLanguage value less than minimum 4 bytes.";
"IPP octetString length too large." = "IPP octetString length too large.";
"IPP rangeOfInteger value not 8 bytes." = "IPP rangeOfInteger value not 8 bytes.";
"IPP resolution value not 9 bytes." = "IPP resolution value not 9 bytes.";
"IPP string length overflows value." = "IPP string length overflows value.";
"IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes.";
"IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes.";
"IPPFIND_SERVICE_DOMAIN Domain name" = "IPPFIND_SERVICE_DOMAIN Domain name";
"IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name" = "IPPFIND_SERVICE_HOSTNAME\n Fully-qualified domain name";
"IPPFIND_SERVICE_NAME Service instance name" = "IPPFIND_SERVICE_NAME Service instance name";
"IPPFIND_SERVICE_PORT Port number" = "IPPFIND_SERVICE_PORT Port number";
"IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = "IPPFIND_SERVICE_REGTYPE DNS-SD registration type";
"IPPFIND_SERVICE_SCHEME URI scheme" = "IPPFIND_SERVICE_SCHEME URI scheme";
"IPPFIND_SERVICE_URI URI" = "IPPFIND_SERVICE_URI URI";
"IPPFIND_TXT_* Value of TXT record key" = "IPPFIND_TXT_* Value of TXT record key";
"ISOLatin1" = "ISOLatin1";
"Illegal control character" = "Illegal control character";
"Illegal main keyword string" = "Illegal main keyword string";
"Illegal option keyword string" = "Illegal option keyword string";
"Illegal translation string" = "Illegal translation string";
"Illegal whitespace character" = "Illegal whitespace character";
"Installable Options" = "Installable Options";
"Installed" = "Installed";
"IntelliBar Label Printer" = "IntelliBar Label Printer";
"Intellitech" = "Intellitech";
"Internal Server Error" = "Internal Server Error";
"Internal error" = "Internal error";
"Internet Postage 2-Part" = "Internet Postage 2-Part";
"Internet Postage 3-Part" = "Internet Postage 3-Part";
"Internet Printing Protocol" = "Internet Printing Protocol";
"Invalid group tag." = "Invalid group tag.";
"Invalid media name arguments." = "Invalid media name arguments.";
"Invalid media size." = "Invalid media size.";
"Invalid named IPP attribute in collection." = "Invalid named IPP attribute in collection.";
"Invalid ppd-name value." = "Invalid ppd-name value.";
"Invalid printer command \"%s\"." = "Invalid printer command “%s”.";
"JCL" = "JCL";
"JIS B0" = "JIS B0";
"JIS B1" = "JIS B1";
"JIS B10" = "JIS B10";
"JIS B2" = "JIS B2";
"JIS B3" = "JIS B3";
"JIS B4" = "JIS B4";
"JIS B4 Long Edge" = "JIS B4 Long Edge";
"JIS B5" = "JIS B5";
"JIS B5 Long Edge" = "JIS B5 Long Edge";
"JIS B6" = "JIS B6";
"JIS B6 Long Edge" = "JIS B6 Long Edge";
"JIS B7" = "JIS B7";
"JIS B8" = "JIS B8";
"JIS B9" = "JIS B9";
"Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files.";
"Job #%d does not exist." = "Job #%d does not exist.";
"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel.";
"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel.";
"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel.";
"Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered.";
"Job #%d is not complete." = "Job #%d is not complete.";
"Job #%d is not held for authentication." = "Job #%d is not held for authentication.";
"Job #%d is not held." = "Job #%d is not held.";
"Job Completed" = "Job Completed";
"Job Created" = "Job Created";
"Job Options Changed" = "Job Options Changed";
"Job Stopped" = "Job Stopped";
"Job is completed and cannot be changed." = "Job is completed and cannot be changed.";
"Job operation failed" = "Job operation failed";
"Job state cannot be changed." = "Job state cannot be changed.";
"Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed.";
"Jobs" = "Jobs";
"LPD/LPR Host or Printer" = "LPD/LPR Host or Printer";
"LPDEST environment variable names default destination that does not exist." = "LPDEST environment variable names default destination that does not exist.";
"Label Printer" = "Label Printer";
"Label Top" = "Label Top";
"Language \"%s\" not supported." = "Language “%s” not supported.";
"Large Address" = "Large Address";
"LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5";
"Letter Oversize" = "Letter Oversize";
"Letter Oversize Long Edge" = "Letter Oversize Long Edge";
"Light" = "Light";
"Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)";
"List Available Printers" = "List Available Printers";
"Listening on port %d." = "Listening on port %d.";
"Local printer created." = "Local printer created.";
"Long-Edge (Portrait)" = "Long-Edge (Portrait)";
"Looking for printer." = "Looking for printer.";
"Main Roll" = "Main Roll";
"Manual Feed" = "Manual Feed";
"Media Size" = "Media Size";
"Media Source" = "Media Source";
"Media Tracking" = "Media Tracking";
"Media Type" = "Media Type";
"Medium" = "Medium";
"Memory allocation error" = "Memory allocation error";
"Missing CloseGroup" = "Missing CloseGroup";
"Missing CloseUI/JCLCloseUI" = "Missing CloseUI/JCLCloseUI";
"Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header";
"Missing asterisk in column 1" = "Missing asterisk in column 1";
"Missing document-number attribute." = "Missing document-number attribute.";
"Missing form variable" = "Missing form variable";
"Missing last-document attribute in request." = "Missing last-document attribute in request.";
"Missing media or media-col." = "Missing media or media-col.";
"Missing media-size in media-col." = "Missing media-size in media-col.";
"Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute.";
"Missing option keyword" = "Missing option keyword";
"Missing requesting-user-name attribute." = "Missing requesting-user-name attribute.";
"Missing required attribute \"%s\"." = "Missing required attribute “%s”.";
"Missing required attributes." = "Missing required attributes.";
"Missing resource in URI" = "Missing resource in URI";
"Missing scheme in URI" = "Missing scheme in URI";
"Missing value string" = "Missing value string";
"Missing x-dimension in media-size." = "Missing x-dimension in media-size.";
"Missing y-dimension in media-size." = "Missing y-dimension in media-size.";
"Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s" = "Model: name = %s\n natural_language = %s\n make-and-model = %s\n device-id = %s";
"Modifiers:" = "Modifiers:";
"Modify Class" = "Modify Class";
"Modify Printer" = "Modify Printer";
"Move All Jobs" = "Move All Jobs";
"Move Job" = "Move Job";
"Moved Permanently" = "Moved Permanently";
"NULL PPD file pointer" = "NULL PPD file pointer";
"Name OID uses indefinite length" = "Name OID uses indefinite length";
"Nested classes are not allowed." = "Nested classes are not allowed.";
"Never" = "Never";
"New credentials are not valid for name." = "New credentials are not valid for name.";
"New credentials are older than stored credentials." = "New credentials are older than stored credentials.";
"No" = "No";
"No Content" = "No Content";
"No IPP attributes." = "No IPP attributes.";
"No PPD name" = "No PPD name";
"No VarBind SEQUENCE" = "No VarBind SEQUENCE";
"No active connection" = "No active connection";
"No active connection." = "No active connection.";
"No active jobs on %s." = "No active jobs on %s.";
"No attributes in request." = "No attributes in request.";
"No authentication information provided." = "No authentication information provided.";
"No common name specified." = "No common name specified.";
"No community name" = "No community name";
"No default destination." = "No default destination.";
"No default printer." = "No default printer.";
"No destinations added." = "No destinations added.";
"No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable.";
"No error-index" = "No error-index";
"No error-status" = "No error-status";
"No file in print request." = "No file in print request.";
"No modification time" = "No modification time";
"No name OID" = "No name OID";
"No pages were found." = "No pages were found.";
"No printer name" = "No printer name";
"No printer-uri found" = "No printer-uri found";
"No printer-uri found for class" = "No printer-uri found for class";
"No printer-uri in request." = "No printer-uri in request.";
"No request URI." = "No request URI.";
"No request protocol version." = "No request protocol version.";
"No request sent." = "No request sent.";
"No request-id" = "No request-id";
"No stored credentials, not valid for name." = "No stored credentials, not valid for name.";
"No subscription attributes in request." = "No subscription attributes in request.";
"No subscriptions found." = "No subscriptions found.";
"No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE";
"No version number" = "No version number";
"Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)";
"Non-continuous (Web sensing)" = "Non-continuous (Web sensing)";
"None" = "None";
"Normal" = "Normal";
"Not Found" = "Not Found";
"Not Implemented" = "Not Implemented";
"Not Installed" = "Not Installed";
"Not Modified" = "Not Modified";
"Not Supported" = "Not Supported";
"Not allowed to print." = "Not allowed to print.";
"Note" = "Note";
"OK" = "OK";
"Off (1-Sided)" = "Off (1-Sided)";
"Oki" = "Oki";
"Online Help" = "Online Help";
"Only local users can create a local printer." = "Only local users can create a local printer.";
"Open of %s failed: %s" = "Open of %s failed: %s";
"OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first";
"OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first";
"Operation Policy" = "Operation Policy";
"Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature.";
"Options Installed" = "Options Installed";
"Options:" = "Options:";
"Other Media" = "Other Media";
"Other Tray" = "Other Tray";
"Out of date PPD cache file." = "Out of date PPD cache file.";
"Out of memory." = "Out of memory.";
"Output Mode" = "Output Mode";
"PCL Laser Printer" = "PCL Laser Printer";
"PRC16K" = "PRC16K";
"PRC16K Long Edge" = "PRC16K Long Edge";
"PRC32K" = "PRC32K";
"PRC32K Long Edge" = "PRC32K Long Edge";
"PRC32K Oversize" = "PRC32K Oversize";
"PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge";
"PRINTER environment variable names default destination that does not exist." = "PRINTER environment variable names default destination that does not exist.";
"Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU";
"Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE";
"ParamCustominCutInterval" = "ParamCustominCutInterval";
"ParamCustominTearInterval" = "ParamCustominTearInterval";
"Password for %s on %s? " = "Password for %s on %s? ";
"Pause Class" = "Pause Class";
"Pause Printer" = "Pause Printer";
"Peel-Off" = "Peel-Off";
"Photo" = "Photo";
"Photo Labels" = "Photo Labels";
"Plain Paper" = "Plain Paper";
"Policies" = "Policies";
"Port Monitor" = "Port Monitor";
"PostScript Printer" = "PostScript Printer";
"Postcard" = "Postcard";
"Postcard Double" = "Postcard Double";
"Postcard Double Long Edge" = "Postcard Double Long Edge";
"Postcard Long Edge" = "Postcard Long Edge";
"Preparing to print." = "Preparing to print.";
"Print Density" = "Print Density";
"Print Job:" = "Print Job:";
"Print Mode" = "Print Mode";
"Print Quality" = "Print Quality";
"Print Rate" = "Print Rate";
"Print Self-Test Page" = "Print Self-Test Page";
"Print Speed" = "Print Speed";
"Print Test Page" = "Print Test Page";
"Print and Cut" = "Print and Cut";
"Print and Tear" = "Print and Tear";
"Print file sent." = "Print file sent.";
"Print job canceled at printer." = "Print job canceled at printer.";
"Print job too large." = "Print job too large.";
"Print job was not accepted." = "Print job was not accepted.";
"Printer \"%s\" already exists." = "Printer “%s” already exists.";
"Printer Added" = "Printer Added";
"Printer Default" = "Printer Default";
"Printer Deleted" = "Printer Deleted";
"Printer Modified" = "Printer Modified";
"Printer Paused" = "Printer Paused";
"Printer Settings" = "Printer Settings";
"Printer cannot print supplied content." = "Printer cannot print supplied content.";
"Printer cannot print with supplied options." = "Printer cannot print with supplied options.";
"Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats.";
"Printer:" = "Printer:";
"Printers" = "Printers";
"Printing page %d, %u%% complete." = "Printing page %d, %u%% complete.";
"Punch" = "Punch";
"Quarto" = "Quarto";
"Quota limit reached." = "Quota limit reached.";
"Rank Owner Job File(s) Total Size" = "Rank Owner Job File(s) Total Size";
"Reject Jobs" = "Reject Jobs";
"Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d).";
"Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d).";
"Reprint After Error" = "Reprint After Error";
"Request Entity Too Large" = "Request Entity Too Large";
"Resolution" = "Resolution";
"Resume Class" = "Resume Class";
"Resume Printer" = "Resume Printer";
"Return Address" = "Return Address";
"Rewind" = "Rewind";
"SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length";
"SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error";
"Second Roll (DUO/Twin Only)" = "Second Roll (DUO/Twin Only)";
"See Other" = "See Other";
"See remote printer." = "See remote printer.";
"Self-signed credentials are blocked." = "Self-signed credentials are blocked.";
"Sending data to printer." = "Sending data to printer.";
"Server Restarted" = "Server Restarted";
"Server Security Auditing" = "Server Security Auditing";
"Server Started" = "Server Started";
"Server Stopped" = "Server Stopped";
"Server credentials not set." = "Server credentials not set.";
"Service Unavailable" = "Service Unavailable";
"Set Allowed Users" = "Set Allowed Users";
"Set As Server Default" = "Set As Server Default";
"Set Class Options" = "Set Class Options";
"Set Printer Options" = "Set Printer Options";
"Set Publishing" = "Set Publishing";
"Shipping Address" = "Shipping Address";
"Short-Edge (Landscape)" = "Short-Edge (Landscape)";
"Special Paper" = "Special Paper";
"Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete.";
"Standard" = "Standard";
"Staple" = "Staple";
// TRANSLATORS: Banner/cover sheet before the print job.
"Starting Banner" = "Starting Banner";
"Starting page %d." = "Starting page %d.";
"Statement" = "Statement";
"Subscription #%d does not exist." = "Subscription #%d does not exist.";
"Substitutions:" = "Substitutions:";
"Super A" = "Super A";
"Super B" = "Super B";
"Super B/A3" = "Super B/A3";
"Switching Protocols" = "Switching Protocols";
"Tabloid" = "Tabloid";
"Tabloid Oversize" = "Tabloid Oversize";
"Tabloid Oversize Long Edge" = "Tabloid Oversize Long Edge";
"Tear" = "Tear";
"Tear-Off" = "Tear-Off";
"Tear-Off Adjust Position" = "Tear-Off Adjust Position";
"The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs.";
"The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids.";
"The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request.";
"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request.";
"The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found.";
"The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s";
"The PPD file could not be opened." = "The PPD file could not be opened.";
"The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
"The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions.";
"The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets).";
"The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists.";
"The printer did not respond." = "The printer did not respond.";
"The printer is in use." = "The printer is in use.";
"The printer is not connected." = "The printer is not connected.";
"The printer is not responding." = "The printer is not responding.";
"The printer is now connected." = "The printer is now connected.";
"The printer is now online." = "The printer is now online.";
"The printer is offline." = "The printer is offline.";
"The printer is unreachable at this time." = "The printer is unreachable at this time.";
"The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time.";
"The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (' \"), question mark (?), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/ \\), quotes (’ ″), question mark (?), or the pound sign (#).";
"The printer or class does not exist." = "The printer or class does not exist.";
"The printer or class is not shared." = "The printer or class is not shared.";
"The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters.";
"The printer-uri attribute is required." = "The printer-uri attribute is required.";
"The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”.";
"The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”.";
"The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.";
"The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported.";
"There are too many subscriptions." = "There are too many subscriptions.";
"There was an unrecoverable USB error." = "There was an unrecoverable USB error.";
"Thermal Transfer Media" = "Thermal Transfer Media";
"Too many active jobs." = "Too many active jobs.";
"Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2).";
"Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d).";
"Transparency" = "Transparency";
"Tray" = "Tray";
"Tray 1" = "Tray 1";
"Tray 2" = "Tray 2";
"Tray 3" = "Tray 3";
"Tray 4" = "Tray 4";
"Trust on first use is disabled." = "Trust on first use is disabled.";
"URI Too Long" = "URI Too Long";
"URI too large" = "URI too large";
"US Fanfold" = "US Fanfold";
"US Ledger" = "US Ledger";
"US Legal" = "US Legal";
"US Legal Oversize" = "US Legal Oversize";
"US Letter" = "US Letter";
"US Letter Long Edge" = "US Letter Long Edge";
"US Letter Oversize" = "US Letter Oversize";
"US Letter Oversize Long Edge" = "US Letter Oversize Long Edge";
"US Letter Small" = "US Letter Small";
"Unable to access cupsd.conf file" = "Unable to access cupsd.conf file";
"Unable to access help file." = "Unable to access help file.";
"Unable to add class" = "Unable to add class";
"Unable to add document to print job." = "Unable to add document to print job.";
"Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”.";
"Unable to add printer" = "Unable to add printer";
"Unable to allocate memory for file types." = "Unable to allocate memory for file types.";
"Unable to allocate memory for page info" = "Unable to allocate memory for page info";
"Unable to allocate memory for pages array" = "Unable to allocate memory for pages array";
"Unable to allocate memory for printer" = "Unable to allocate memory for printer";
"Unable to cancel print job." = "Unable to cancel print job.";
"Unable to change printer" = "Unable to change printer";
"Unable to change printer-is-shared attribute" = "Unable to change printer-is-shared attribute";
"Unable to change server settings" = "Unable to change server settings";
"Unable to compile mimeMediaType regular expression: %s." = "Unable to compile mimeMediaType regular expression: %s.";
"Unable to compile naturalLanguage regular expression: %s." = "Unable to compile naturalLanguage regular expression: %s.";
"Unable to configure printer options." = "Unable to configure printer options.";
"Unable to connect to host." = "Unable to connect to host.";
"Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class.";
"Unable to copy PPD file - %s" = "Unable to copy PPD file - %s";
"Unable to copy PPD file." = "Unable to copy PPD file.";
"Unable to create credentials from array." = "Unable to create credentials from array.";
"Unable to create printer-uri" = "Unable to create printer-uri";
"Unable to create printer." = "Unable to create printer.";
"Unable to create server credentials." = "Unable to create server credentials.";
"Unable to create spool directory \"%s\": %s" = "Unable to create spool directory “%s”: %s";
"Unable to create temporary file" = "Unable to create temporary file";
"Unable to delete class" = "Unable to delete class";
"Unable to delete printer" = "Unable to delete printer";
"Unable to do maintenance command" = "Unable to do maintenance command";
"Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB";
"Unable to establish a secure connection to host (%d)." = "Unable to establish a secure connection to host (%d).";
"Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid).";
"Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid).";
"Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate).";
"Unable to establish a secure connection to host (host name mismatch)." = "Unable to establish a secure connection to host (host name mismatch).";
"Unable to establish a secure connection to host (peer dropped connection before responding)." = "Unable to establish a secure connection to host (peer dropped connection before responding).";
"Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate).";
"Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate).";
"Unable to establish a secure connection to host." = "Unable to establish a secure connection to host.";
"Unable to execute command \"%s\": %s" = "Unable to execute command “%s”: %s";
"Unable to find destination for job" = "Unable to find destination for job";
"Unable to find printer." = "Unable to find printer.";
"Unable to find server credentials." = "Unable to find server credentials.";
"Unable to get backend exit status." = "Unable to get backend exit status.";
"Unable to get class list" = "Unable to get class list";
"Unable to get class status" = "Unable to get class status";
"Unable to get list of printer drivers" = "Unable to get list of printer drivers";
"Unable to get printer attributes" = "Unable to get printer attributes";
"Unable to get printer list" = "Unable to get printer list";
"Unable to get printer status" = "Unable to get printer status";
"Unable to get printer status." = "Unable to get printer status.";
"Unable to load help index." = "Unable to load help index.";
"Unable to locate printer \"%s\"." = "Unable to locate printer “%s”.";
"Unable to locate printer." = "Unable to locate printer.";
"Unable to modify class" = "Unable to modify class";
"Unable to modify printer" = "Unable to modify printer";
"Unable to move job" = "Unable to move job";
"Unable to move jobs" = "Unable to move jobs";
"Unable to open PPD file" = "Unable to open PPD file";
"Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:";
"Unable to open device file" = "Unable to open device file";
"Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d.";
"Unable to open help file." = "Unable to open help file.";
"Unable to open print file" = "Unable to open print file";
"Unable to open raster file" = "Unable to open raster file";
"Unable to print test page" = "Unable to print test page";
"Unable to read print data." = "Unable to read print data.";
"Unable to register \"%s.%s\": %d" = "Unable to register “%s.%s”: %d";
"Unable to rename job document file." = "Unable to rename job document file.";
"Unable to resolve printer-uri." = "Unable to resolve printer-uri.";
"Unable to see in file" = "Unable to see in file";
"Unable to send command to printer driver" = "Unable to send command to printer driver";
"Unable to send data to printer." = "Unable to send data to printer.";
"Unable to set options" = "Unable to set options";
"Unable to set server default" = "Unable to set server default";
"Unable to start backend process." = "Unable to start backend process.";
"Unable to upload cupsd.conf file" = "Unable to upload cupsd.conf file";
"Unable to use legacy USB class driver." = "Unable to use legacy USB class driver.";
"Unable to write print data" = "Unable to write print data";
"Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s";
"Unauthorized" = "Unauthorized";
"Units" = "Units";
"Unknown" = "Unknown";
"Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”.";
"Unknown directive \"%s\" on line %d of \"%s\" ignored." = "Unknown directive “%s” on line %d of “%s” ignored.";
"Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”.";
"Unknown file order: \"%s\"." = "Unknown file order: “%s”.";
"Unknown format character: \"%c\"." = "Unknown format character: “%c”.";
"Unknown hash algorithm." = "Unknown hash algorithm.";
"Unknown media size name." = "Unknown media size name.";
"Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”.";
"Unknown option \"%s\"." = "Unknown option “%s”.";
"Unknown print mode: \"%s\"." = "Unknown print mode: “%s”.";
"Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”.";
"Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”.";
"Unknown request method." = "Unknown request method.";
"Unknown request version." = "Unknown request version.";
"Unknown scheme in URI" = "Unknown scheme in URI";
"Unknown service name." = "Unknown service name.";
"Unknown version option value: \"%s\"." = "Unknown version option value: “%s”.";
"Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”.";
"Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”.";
"Unsupported 'job-hold-until' value." = "Unsupported ‘job-hold-until’ value.";
"Unsupported 'job-name' value." = "Unsupported ‘job-name’ value.";
"Unsupported character set \"%s\"." = "Unsupported character set “%s”.";
"Unsupported compression \"%s\"." = "Unsupported compression “%s”.";
"Unsupported document-format \"%s\"." = "Unsupported document-format “%s”.";
"Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”.";
"Unsupported format \"%s\"." = "Unsupported format “%s”.";
"Unsupported margins." = "Unsupported margins.";
"Unsupported media value." = "Unsupported media value.";
"Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1.";
"Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb.";
"Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none.";
"Unsupported raster data." = "Unsupported raster data.";
"Unsupported value type" = "Unsupported value type";
"Upgrade Required" = "Upgrade Required";
"Usage: %s [options] destination(s)" = "Usage: %s [options] destination(s)";
"Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]";
"Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]" = "Usage: cancel [options] [id]\n cancel [options] [destination]\n cancel [options] [destination-id]";
"Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]";
"Usage: cupsd [options]" = "Usage: cupsd [options]";
"Usage: cupsfilter [ options ] [ -- ] filename" = "Usage: cupsfilter [ options ] [ -- ] filename";
"Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]\n program | cupstestppd [options] -" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]\n program | cupstestppd [options] -";
"Usage: ippeveprinter [options] \"name\"" = "Usage: ippeveprinter [options] “name”";
"Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n ippfind [options] name[.regtype[.domain.]] ... [expression]\n ippfind --help\n ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n ippfind [options] name[.regtype[.domain.]] … [expression]\n ippfind --help\n ippfind --version";
"Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]";
"Usage: lp [options] [--] [file(s)]\n lp [options] -i id" = "Usage: lp [options] [--] [file(s)]\n lp [options] -i id";
"Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination" = "Usage: lpadmin [options] -d destination\n lpadmin [options] -p destination\n lpadmin [options] -p destination -c class\n lpadmin [options] -p destination -r class\n lpadmin [options] -x destination";
"Usage: lpinfo [options] -m\n lpinfo [options] -v" = "Usage: lpinfo [options] -m\n lpinfo [options] -v";
"Usage: lpmove [options] job destination\n lpmove [options] source-destination destination" = "Usage: lpmove [options] job destination\n lpmove [options] source-destination destination";
"Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination" = "Usage: lpoptions [options] -d destination\n lpoptions [options] [-p destination] [-l]\n lpoptions [options] [-p destination] -o option[=value]\n lpoptions [options] -x destination";
"Usage: lpq [options] [+interval]" = "Usage: lpq [options] [+interval]";
"Usage: lpr [options] [file(s)]" = "Usage: lpr [options] [file(s)]";
"Usage: lprm [options] [id]\n lprm [options] -" = "Usage: lprm [options] [id]\n lprm [options] -";
"Usage: lpstat [options]" = "Usage: lpstat [options]";
"Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]";
"Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html";
"Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]";
"Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]";
"Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]";
"Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]";
"Using spool directory \"%s\"." = "Using spool directory “%s”.";
"Value uses indefinite length" = "Value uses indefinite length";
"VarBind uses indefinite length" = "VarBind uses indefinite length";
"Version uses indefinite length" = "Version uses indefinite length";
"Waiting for job to complete." = "Waiting for job to complete.";
"Waiting for printer to become available." = "Waiting for printer to become available.";
"Waiting for printer to finish." = "Waiting for printer to finish.";
"Warning: This program will be removed in a future version of CUPS." = "Warning: This program will be removed in a future version of CUPS.";
"Web Interface is Disabled" = "Web Interface is Disabled";
"Yes" = "Yes";
"You cannot access this page." = "You cannot access this page.";
"You must access this page using the URL https://%s:%d%s." = "You must access this page using the URL https://%s:%d%s.";
"Your account does not have the necessary privileges." = "Your account does not have the necessary privileges.";
"ZPL Label Printer" = "ZPL Label Printer";
"Zebra" = "Zebra";
"aborted" = "aborted";
// TRANSLATORS: Accuracy Units
"accuracy-units" = "Accuracy Units";
// TRANSLATORS: Millimeters
"accuracy-units.mm" = "Millimeters";
// TRANSLATORS: Nanometers
"accuracy-units.nm" = "Nanometers";
// TRANSLATORS: Micrometers
"accuracy-units.um" = "Micrometers";
// TRANSLATORS: Bale Output
"baling" = "Bale Output";
// TRANSLATORS: Bale Using
"baling-type" = "Bale Using";
// TRANSLATORS: Band
"baling-type.band" = "Band";
// TRANSLATORS: Shrink Wrap
"baling-type.shrink-wrap" = "Shrink Wrap";
// TRANSLATORS: Wrap
"baling-type.wrap" = "Wrap";
// TRANSLATORS: Bale After
"baling-when" = "Bale After";
// TRANSLATORS: Job
"baling-when.after-job" = "Job";
// TRANSLATORS: Sets
"baling-when.after-sets" = "Sets";
// TRANSLATORS: Bind Output
"binding" = "Bind Output";
// TRANSLATORS: Bind Edge
"binding-reference-edge" = "Bind Edge";
// TRANSLATORS: Bottom
"binding-reference-edge.bottom" = "Bottom";
// TRANSLATORS: Left
"binding-reference-edge.left" = "Left";
// TRANSLATORS: Right
"binding-reference-edge.right" = "Right";
// TRANSLATORS: Top
"binding-reference-edge.top" = "Top";
// TRANSLATORS: Binder Type
"binding-type" = "Binder Type";
// TRANSLATORS: Adhesive
"binding-type.adhesive" = "Adhesive";
// TRANSLATORS: Comb
"binding-type.comb" = "Comb";
// TRANSLATORS: Flat
"binding-type.flat" = "Flat";
// TRANSLATORS: Padding
"binding-type.padding" = "Padding";
// TRANSLATORS: Perfect
"binding-type.perfect" = "Perfect";
// TRANSLATORS: Spiral
"binding-type.spiral" = "Spiral";
// TRANSLATORS: Tape
"binding-type.tape" = "Tape";
// TRANSLATORS: Velo
"binding-type.velo" = "Velo";
"canceled" = "canceled";
// TRANSLATORS: Chamber Humidity
"chamber-humidity" = "Chamber Humidity";
// TRANSLATORS: Chamber Temperature
"chamber-temperature" = "Chamber Temperature";
// TRANSLATORS: Print Job Cost
"charge-info-message" = "Print Job Cost";
// TRANSLATORS: Coat Sheets
"coating" = "Coat Sheets";
// TRANSLATORS: Add Coating To
"coating-sides" = "Add Coating To";
// TRANSLATORS: Back
"coating-sides.back" = "Back";
// TRANSLATORS: Front and Back
"coating-sides.both" = "Front and Back";
// TRANSLATORS: Front
"coating-sides.front" = "Front";
// TRANSLATORS: Type of Coating
"coating-type" = "Type of Coating";
// TRANSLATORS: Archival
"coating-type.archival" = "Archival";
// TRANSLATORS: Archival Glossy
"coating-type.archival-glossy" = "Archival Glossy";
// TRANSLATORS: Archival Matte
"coating-type.archival-matte" = "Archival Matte";
// TRANSLATORS: Archival Semi Gloss
"coating-type.archival-semi-gloss" = "Archival Semi Gloss";
// TRANSLATORS: Glossy
"coating-type.glossy" = "Glossy";
// TRANSLATORS: High Gloss
"coating-type.high-gloss" = "High Gloss";
// TRANSLATORS: Matte
"coating-type.matte" = "Matte";
// TRANSLATORS: Semi-gloss
"coating-type.semi-gloss" = "Semi-gloss";
// TRANSLATORS: Silicone
"coating-type.silicone" = "Silicone";
// TRANSLATORS: Translucent
"coating-type.translucent" = "Translucent";
"completed" = "completed";
// TRANSLATORS: Print Confirmation Sheet
"confirmation-sheet-print" = "Print Confirmation Sheet";
// TRANSLATORS: Copies
"copies" = "Copies";
// TRANSLATORS: Back Cover
"cover-back" = "Back Cover";
// TRANSLATORS: Front Cover
"cover-front" = "Front Cover";
// TRANSLATORS: Cover Sheet Info
"cover-sheet-info" = "Cover Sheet Info";
// TRANSLATORS: Date Time
"cover-sheet-info-supported.date-time" = "Date Time";
// TRANSLATORS: From Name
"cover-sheet-info-supported.from-name" = "From Name";
// TRANSLATORS: Logo
"cover-sheet-info-supported.logo" = "Logo";
// TRANSLATORS: Message
"cover-sheet-info-supported.message" = "Message";
// TRANSLATORS: Organization
"cover-sheet-info-supported.organization" = "Organization";
// TRANSLATORS: Subject
"cover-sheet-info-supported.subject" = "Subject";
// TRANSLATORS: To Name
"cover-sheet-info-supported.to-name" = "To Name";
// TRANSLATORS: Printed Cover
"cover-type" = "Printed Cover";
// TRANSLATORS: No Cover
"cover-type.no-cover" = "No Cover";
// TRANSLATORS: Back Only
"cover-type.print-back" = "Back Only";
// TRANSLATORS: Front and Back
"cover-type.print-both" = "Front and Back";
// TRANSLATORS: Front Only
"cover-type.print-front" = "Front Only";
// TRANSLATORS: None
"cover-type.print-none" = "None";
// TRANSLATORS: Cover Output
"covering" = "Cover Output";
// TRANSLATORS: Add Cover
"covering-name" = "Add Cover";
// TRANSLATORS: Plain
"covering-name.plain" = "Plain";
// TRANSLATORS: Pre-cut
"covering-name.pre-cut" = "Pre-cut";
// TRANSLATORS: Pre-printed
"covering-name.pre-printed" = "Pre-printed";
"cups-deviced failed to execute." = "cups-deviced failed to execute.";
"cups-driverd failed to execute." = "cups-driverd failed to execute.";
"cupsctl: Cannot set %s directly." = "cupsctl: Cannot set %s directly.";
"cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s";
"cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”";
"cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”";
"cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option.";
"cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option.";
"cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode.";
"cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed.";
"cupsd: Unable to get current directory." = "cupsd: Unable to get current directory.";
"cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file.";
"cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting.";
"cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting.";
"cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d.";
"cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d.";
"cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified.";
"cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s";
"cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option.";
"cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option.";
// TRANSLATORS: Detailed Status Message
"detailed-status-message" = "Detailed Status Message";
"device for %s/%s: %s" = "device for %s/%s: %s";
"device for %s: %s" = "device for %s: %s";
// TRANSLATORS: Copies
"document-copies" = "Copies";
// TRANSLATORS: Document Privacy Attributes
"document-privacy-attributes" = "Document Privacy Attributes";
// TRANSLATORS: All
"document-privacy-attributes.all" = "All";
// TRANSLATORS: Default
"document-privacy-attributes.default" = "Default";
// TRANSLATORS: Document Description
"document-privacy-attributes.document-description" = "Document Description";
// TRANSLATORS: Document Template
"document-privacy-attributes.document-template" = "Document Template";
// TRANSLATORS: None
"document-privacy-attributes.none" = "None";
// TRANSLATORS: Document Privacy Scope
"document-privacy-scope" = "Document Privacy Scope";
// TRANSLATORS: All
"document-privacy-scope.all" = "All";
// TRANSLATORS: Default
"document-privacy-scope.default" = "Default";
// TRANSLATORS: None
"document-privacy-scope.none" = "None";
// TRANSLATORS: Owner
"document-privacy-scope.owner" = "Owner";
// TRANSLATORS: Document State
"document-state" = "Document State";
// TRANSLATORS: Detailed Document State
"document-state-reasons" = "Detailed Document State";
// TRANSLATORS: Aborted By System
"document-state-reasons.aborted-by-system" = "Aborted By System";
// TRANSLATORS: Canceled At Device
"document-state-reasons.canceled-at-device" = "Canceled At Device";
// TRANSLATORS: Canceled By Operator
"document-state-reasons.canceled-by-operator" = "Canceled By Operator";
// TRANSLATORS: Canceled By User
"document-state-reasons.canceled-by-user" = "Canceled By User";
// TRANSLATORS: Completed Successfully
"document-state-reasons.completed-successfully" = "Completed Successfully";
// TRANSLATORS: Completed With Errors
"document-state-reasons.completed-with-errors" = "Completed With Errors";
// TRANSLATORS: Completed With Warnings
"document-state-reasons.completed-with-warnings" = "Completed With Warnings";
// TRANSLATORS: Compression Error
"document-state-reasons.compression-error" = "Compression Error";
// TRANSLATORS: Data Insufficient
"document-state-reasons.data-insufficient" = "Data Insufficient";
// TRANSLATORS: Digital Signature Did Not Verify
"document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
// TRANSLATORS: Digital Signature Type Not Supported
"document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
// TRANSLATORS: Digital Signature Wait
"document-state-reasons.digital-signature-wait" = "Digital Signature Wait";
// TRANSLATORS: Document Access Error
"document-state-reasons.document-access-error" = "Document Access Error";
// TRANSLATORS: Document Fetchable
"document-state-reasons.document-fetchable" = "Document Fetchable";
// TRANSLATORS: Document Format Error
"document-state-reasons.document-format-error" = "Document Format Error";
// TRANSLATORS: Document Password Error
"document-state-reasons.document-password-error" = "Document Password Error";
// TRANSLATORS: Document Permission Error
"document-state-reasons.document-permission-error" = "Document Permission Error";
// TRANSLATORS: Document Security Error
"document-state-reasons.document-security-error" = "Document Security Error";
// TRANSLATORS: Document Unprintable Error
"document-state-reasons.document-unprintable-error" = "Document Unprintable Error";
// TRANSLATORS: Errors Detected
"document-state-reasons.errors-detected" = "Errors Detected";
// TRANSLATORS: Incoming
"document-state-reasons.incoming" = "Incoming";
// TRANSLATORS: Interpreting
"document-state-reasons.interpreting" = "Interpreting";
// TRANSLATORS: None
"document-state-reasons.none" = "None";
// TRANSLATORS: Outgoing
"document-state-reasons.outgoing" = "Outgoing";
// TRANSLATORS: Printing
"document-state-reasons.printing" = "Printing";
// TRANSLATORS: Processing To Stop Point
"document-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
// TRANSLATORS: Queued
"document-state-reasons.queued" = "Queued";
// TRANSLATORS: Queued For Marker
"document-state-reasons.queued-for-marker" = "Queued For Marker";
// TRANSLATORS: Queued In Device
"document-state-reasons.queued-in-device" = "Queued In Device";
// TRANSLATORS: Resources Are Not Ready
"document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
// TRANSLATORS: Resources Are Not Supported
"document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
// TRANSLATORS: Submission Interrupted
"document-state-reasons.submission-interrupted" = "Submission Interrupted";
// TRANSLATORS: Transforming
"document-state-reasons.transforming" = "Transforming";
// TRANSLATORS: Unsupported Compression
"document-state-reasons.unsupported-compression" = "Unsupported Compression";
// TRANSLATORS: Unsupported Document Format
"document-state-reasons.unsupported-document-format" = "Unsupported Document Format";
// TRANSLATORS: Warnings Detected
"document-state-reasons.warnings-detected" = "Warnings Detected";
// TRANSLATORS: Pending
"document-state.3" = "Pending";
// TRANSLATORS: Processing
"document-state.5" = "Processing";
// TRANSLATORS: Stopped
"document-state.6" = "Stopped";
// TRANSLATORS: Canceled
"document-state.7" = "Canceled";
// TRANSLATORS: Aborted
"document-state.8" = "Aborted";
// TRANSLATORS: Completed
"document-state.9" = "Completed";
"error-index uses indefinite length" = "error-index uses indefinite length";
"error-status uses indefinite length" = "error-status uses indefinite length";
"expression --and expression\n Logical AND" = "expression --and expression\n Logical AND";
"expression --or expression\n Logical OR" = "expression --or expression\n Logical OR";
"expression expression Logical AND" = "expression expression Logical AND";
// TRANSLATORS: Feed Orientation
"feed-orientation" = "Feed Orientation";
// TRANSLATORS: Long Edge First
"feed-orientation.long-edge-first" = "Long Edge First";
// TRANSLATORS: Short Edge First
"feed-orientation.short-edge-first" = "Short Edge First";
// TRANSLATORS: Fetch Status Code
"fetch-status-code" = "Fetch Status Code";
// TRANSLATORS: Finishing Template
"finishing-template" = "Finishing Template";
// TRANSLATORS: Bale
"finishing-template.bale" = "Bale";
// TRANSLATORS: Bind
"finishing-template.bind" = "Bind";
// TRANSLATORS: Bind Bottom
"finishing-template.bind-bottom" = "Bind Bottom";
// TRANSLATORS: Bind Left
"finishing-template.bind-left" = "Bind Left";
// TRANSLATORS: Bind Right
"finishing-template.bind-right" = "Bind Right";
// TRANSLATORS: Bind Top
"finishing-template.bind-top" = "Bind Top";
// TRANSLATORS: Booklet Maker
"finishing-template.booklet-maker" = "Booklet Maker";
// TRANSLATORS: Coat
"finishing-template.coat" = "Coat";
// TRANSLATORS: Cover
"finishing-template.cover" = "Cover";
// TRANSLATORS: Edge Stitch
"finishing-template.edge-stitch" = "Edge Stitch";
// TRANSLATORS: Edge Stitch Bottom
"finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom";
// TRANSLATORS: Edge Stitch Left
"finishing-template.edge-stitch-left" = "Edge Stitch Left";
// TRANSLATORS: Edge Stitch Right
"finishing-template.edge-stitch-right" = "Edge Stitch Right";
// TRANSLATORS: Edge Stitch Top
"finishing-template.edge-stitch-top" = "Edge Stitch Top";
// TRANSLATORS: Fold
"finishing-template.fold" = "Fold";
// TRANSLATORS: Accordion Fold
"finishing-template.fold-accordion" = "Accordion Fold";
// TRANSLATORS: Double Gate Fold
"finishing-template.fold-double-gate" = "Double Gate Fold";
// TRANSLATORS: Engineering Z Fold
"finishing-template.fold-engineering-z" = "Engineering Z Fold";
// TRANSLATORS: Gate Fold
"finishing-template.fold-gate" = "Gate Fold";
// TRANSLATORS: Half Fold
"finishing-template.fold-half" = "Half Fold";
// TRANSLATORS: Half Z Fold
"finishing-template.fold-half-z" = "Half Z Fold";
// TRANSLATORS: Left Gate Fold
"finishing-template.fold-left-gate" = "Left Gate Fold";
// TRANSLATORS: Letter Fold
"finishing-template.fold-letter" = "Letter Fold";
// TRANSLATORS: Parallel Fold
"finishing-template.fold-parallel" = "Parallel Fold";
// TRANSLATORS: Poster Fold
"finishing-template.fold-poster" = "Poster Fold";
// TRANSLATORS: Right Gate Fold
"finishing-template.fold-right-gate" = "Right Gate Fold";
// TRANSLATORS: Z Fold
"finishing-template.fold-z" = "Z Fold";
// TRANSLATORS: JDF F10-1
"finishing-template.jdf-f10-1" = "JDF F10-1";
// TRANSLATORS: JDF F10-2
"finishing-template.jdf-f10-2" = "JDF F10-2";
// TRANSLATORS: JDF F10-3
"finishing-template.jdf-f10-3" = "JDF F10-3";
// TRANSLATORS: JDF F12-1
"finishing-template.jdf-f12-1" = "JDF F12-1";
// TRANSLATORS: JDF F12-10
"finishing-template.jdf-f12-10" = "JDF F12-10";
// TRANSLATORS: JDF F12-11
"finishing-template.jdf-f12-11" = "JDF F12-11";
// TRANSLATORS: JDF F12-12
"finishing-template.jdf-f12-12" = "JDF F12-12";
// TRANSLATORS: JDF F12-13
"finishing-template.jdf-f12-13" = "JDF F12-13";
// TRANSLATORS: JDF F12-14
"finishing-template.jdf-f12-14" = "JDF F12-14";
// TRANSLATORS: JDF F12-2
"finishing-template.jdf-f12-2" = "JDF F12-2";
// TRANSLATORS: JDF F12-3
"finishing-template.jdf-f12-3" = "JDF F12-3";
// TRANSLATORS: JDF F12-4
"finishing-template.jdf-f12-4" = "JDF F12-4";
// TRANSLATORS: JDF F12-5
"finishing-template.jdf-f12-5" = "JDF F12-5";
// TRANSLATORS: JDF F12-6
"finishing-template.jdf-f12-6" = "JDF F12-6";
// TRANSLATORS: JDF F12-7
"finishing-template.jdf-f12-7" = "JDF F12-7";
// TRANSLATORS: JDF F12-8
"finishing-template.jdf-f12-8" = "JDF F12-8";
// TRANSLATORS: JDF F12-9
"finishing-template.jdf-f12-9" = "JDF F12-9";
// TRANSLATORS: JDF F14-1
"finishing-template.jdf-f14-1" = "JDF F14-1";
// TRANSLATORS: JDF F16-1
"finishing-template.jdf-f16-1" = "JDF F16-1";
// TRANSLATORS: JDF F16-10
"finishing-template.jdf-f16-10" = "JDF F16-10";
// TRANSLATORS: JDF F16-11
"finishing-template.jdf-f16-11" = "JDF F16-11";
// TRANSLATORS: JDF F16-12
"finishing-template.jdf-f16-12" = "JDF F16-12";
// TRANSLATORS: JDF F16-13
"finishing-template.jdf-f16-13" = "JDF F16-13";
// TRANSLATORS: JDF F16-14
"finishing-template.jdf-f16-14" = "JDF F16-14";
// TRANSLATORS: JDF F16-2
"finishing-template.jdf-f16-2" = "JDF F16-2";
// TRANSLATORS: JDF F16-3
"finishing-template.jdf-f16-3" = "JDF F16-3";
// TRANSLATORS: JDF F16-4
"finishing-template.jdf-f16-4" = "JDF F16-4";
// TRANSLATORS: JDF F16-5
"finishing-template.jdf-f16-5" = "JDF F16-5";
// TRANSLATORS: JDF F16-6
"finishing-template.jdf-f16-6" = "JDF F16-6";
// TRANSLATORS: JDF F16-7
"finishing-template.jdf-f16-7" = "JDF F16-7";
// TRANSLATORS: JDF F16-8
"finishing-template.jdf-f16-8" = "JDF F16-8";
// TRANSLATORS: JDF F16-9
"finishing-template.jdf-f16-9" = "JDF F16-9";
// TRANSLATORS: JDF F18-1
"finishing-template.jdf-f18-1" = "JDF F18-1";
// TRANSLATORS: JDF F18-2
"finishing-template.jdf-f18-2" = "JDF F18-2";
// TRANSLATORS: JDF F18-3
"finishing-template.jdf-f18-3" = "JDF F18-3";
// TRANSLATORS: JDF F18-4
"finishing-template.jdf-f18-4" = "JDF F18-4";
// TRANSLATORS: JDF F18-5
"finishing-template.jdf-f18-5" = "JDF F18-5";
// TRANSLATORS: JDF F18-6
"finishing-template.jdf-f18-6" = "JDF F18-6";
// TRANSLATORS: JDF F18-7
"finishing-template.jdf-f18-7" = "JDF F18-7";
// TRANSLATORS: JDF F18-8
"finishing-template.jdf-f18-8" = "JDF F18-8";
// TRANSLATORS: JDF F18-9
"finishing-template.jdf-f18-9" = "JDF F18-9";
// TRANSLATORS: JDF F2-1
"finishing-template.jdf-f2-1" = "JDF F2-1";
// TRANSLATORS: JDF F20-1
"finishing-template.jdf-f20-1" = "JDF F20-1";
// TRANSLATORS: JDF F20-2
"finishing-template.jdf-f20-2" = "JDF F20-2";
// TRANSLATORS: JDF F24-1
"finishing-template.jdf-f24-1" = "JDF F24-1";
// TRANSLATORS: JDF F24-10
"finishing-template.jdf-f24-10" = "JDF F24-10";
// TRANSLATORS: JDF F24-11
"finishing-template.jdf-f24-11" = "JDF F24-11";
// TRANSLATORS: JDF F24-2
"finishing-template.jdf-f24-2" = "JDF F24-2";
// TRANSLATORS: JDF F24-3
"finishing-template.jdf-f24-3" = "JDF F24-3";
// TRANSLATORS: JDF F24-4
"finishing-template.jdf-f24-4" = "JDF F24-4";
// TRANSLATORS: JDF F24-5
"finishing-template.jdf-f24-5" = "JDF F24-5";
// TRANSLATORS: JDF F24-6
"finishing-template.jdf-f24-6" = "JDF F24-6";
// TRANSLATORS: JDF F24-7
"finishing-template.jdf-f24-7" = "JDF F24-7";
// TRANSLATORS: JDF F24-8
"finishing-template.jdf-f24-8" = "JDF F24-8";
// TRANSLATORS: JDF F24-9
"finishing-template.jdf-f24-9" = "JDF F24-9";
// TRANSLATORS: JDF F28-1
"finishing-template.jdf-f28-1" = "JDF F28-1";
// TRANSLATORS: JDF F32-1
"finishing-template.jdf-f32-1" = "JDF F32-1";
// TRANSLATORS: JDF F32-2
"finishing-template.jdf-f32-2" = "JDF F32-2";
// TRANSLATORS: JDF F32-3
"finishing-template.jdf-f32-3" = "JDF F32-3";
// TRANSLATORS: JDF F32-4
"finishing-template.jdf-f32-4" = "JDF F32-4";
// TRANSLATORS: JDF F32-5
"finishing-template.jdf-f32-5" = "JDF F32-5";
// TRANSLATORS: JDF F32-6
"finishing-template.jdf-f32-6" = "JDF F32-6";
// TRANSLATORS: JDF F32-7
"finishing-template.jdf-f32-7" = "JDF F32-7";
// TRANSLATORS: JDF F32-8
"finishing-template.jdf-f32-8" = "JDF F32-8";
// TRANSLATORS: JDF F32-9
"finishing-template.jdf-f32-9" = "JDF F32-9";
// TRANSLATORS: JDF F36-1
"finishing-template.jdf-f36-1" = "JDF F36-1";
// TRANSLATORS: JDF F36-2
"finishing-template.jdf-f36-2" = "JDF F36-2";
// TRANSLATORS: JDF F4-1
"finishing-template.jdf-f4-1" = "JDF F4-1";
// TRANSLATORS: JDF F4-2
"finishing-template.jdf-f4-2" = "JDF F4-2";
// TRANSLATORS: JDF F40-1
"finishing-template.jdf-f40-1" = "JDF F40-1";
// TRANSLATORS: JDF F48-1
"finishing-template.jdf-f48-1" = "JDF F48-1";
// TRANSLATORS: JDF F48-2
"finishing-template.jdf-f48-2" = "JDF F48-2";
// TRANSLATORS: JDF F6-1
"finishing-template.jdf-f6-1" = "JDF F6-1";
// TRANSLATORS: JDF F6-2
"finishing-template.jdf-f6-2" = "JDF F6-2";
// TRANSLATORS: JDF F6-3
"finishing-template.jdf-f6-3" = "JDF F6-3";
// TRANSLATORS: JDF F6-4
"finishing-template.jdf-f6-4" = "JDF F6-4";
// TRANSLATORS: JDF F6-5
"finishing-template.jdf-f6-5" = "JDF F6-5";
// TRANSLATORS: JDF F6-6
"finishing-template.jdf-f6-6" = "JDF F6-6";
// TRANSLATORS: JDF F6-7
"finishing-template.jdf-f6-7" = "JDF F6-7";
// TRANSLATORS: JDF F6-8
"finishing-template.jdf-f6-8" = "JDF F6-8";
// TRANSLATORS: JDF F64-1
"finishing-template.jdf-f64-1" = "JDF F64-1";
// TRANSLATORS: JDF F64-2
"finishing-template.jdf-f64-2" = "JDF F64-2";
// TRANSLATORS: JDF F8-1
"finishing-template.jdf-f8-1" = "JDF F8-1";
// TRANSLATORS: JDF F8-2
"finishing-template.jdf-f8-2" = "JDF F8-2";
// TRANSLATORS: JDF F8-3
"finishing-template.jdf-f8-3" = "JDF F8-3";
// TRANSLATORS: JDF F8-4
"finishing-template.jdf-f8-4" = "JDF F8-4";
// TRANSLATORS: JDF F8-5
"finishing-template.jdf-f8-5" = "JDF F8-5";
// TRANSLATORS: JDF F8-6
"finishing-template.jdf-f8-6" = "JDF F8-6";
// TRANSLATORS: JDF F8-7
"finishing-template.jdf-f8-7" = "JDF F8-7";
// TRANSLATORS: Jog Offset
"finishing-template.jog-offset" = "Jog Offset";
// TRANSLATORS: Laminate
"finishing-template.laminate" = "Laminate";
// TRANSLATORS: Punch
"finishing-template.punch" = "Punch";
// TRANSLATORS: Punch Bottom Left
"finishing-template.punch-bottom-left" = "Punch Bottom Left";
// TRANSLATORS: Punch Bottom Right
"finishing-template.punch-bottom-right" = "Punch Bottom Right";
// TRANSLATORS: 2-hole Punch Bottom
"finishing-template.punch-dual-bottom" = "2-hole Punch Bottom";
// TRANSLATORS: 2-hole Punch Left
"finishing-template.punch-dual-left" = "2-hole Punch Left";
// TRANSLATORS: 2-hole Punch Right
"finishing-template.punch-dual-right" = "2-hole Punch Right";
// TRANSLATORS: 2-hole Punch Top
"finishing-template.punch-dual-top" = "2-hole Punch Top";
// TRANSLATORS: Multi-hole Punch Bottom
"finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom";
// TRANSLATORS: Multi-hole Punch Left
"finishing-template.punch-multiple-left" = "Multi-hole Punch Left";
// TRANSLATORS: Multi-hole Punch Right
"finishing-template.punch-multiple-right" = "Multi-hole Punch Right";
// TRANSLATORS: Multi-hole Punch Top
"finishing-template.punch-multiple-top" = "Multi-hole Punch Top";
// TRANSLATORS: 4-hole Punch Bottom
"finishing-template.punch-quad-bottom" = "4-hole Punch Bottom";
// TRANSLATORS: 4-hole Punch Left
"finishing-template.punch-quad-left" = "4-hole Punch Left";
// TRANSLATORS: 4-hole Punch Right
"finishing-template.punch-quad-right" = "4-hole Punch Right";
// TRANSLATORS: 4-hole Punch Top
"finishing-template.punch-quad-top" = "4-hole Punch Top";
// TRANSLATORS: Punch Top Left
"finishing-template.punch-top-left" = "Punch Top Left";
// TRANSLATORS: Punch Top Right
"finishing-template.punch-top-right" = "Punch Top Right";
// TRANSLATORS: 3-hole Punch Bottom
"finishing-template.punch-triple-bottom" = "3-hole Punch Bottom";
// TRANSLATORS: 3-hole Punch Left
"finishing-template.punch-triple-left" = "3-hole Punch Left";
// TRANSLATORS: 3-hole Punch Right
"finishing-template.punch-triple-right" = "3-hole Punch Right";
// TRANSLATORS: 3-hole Punch Top
"finishing-template.punch-triple-top" = "3-hole Punch Top";
// TRANSLATORS: Saddle Stitch
"finishing-template.saddle-stitch" = "Saddle Stitch";
// TRANSLATORS: Staple
"finishing-template.staple" = "Staple";
// TRANSLATORS: Staple Bottom Left
"finishing-template.staple-bottom-left" = "Staple Bottom Left";
// TRANSLATORS: Staple Bottom Right
"finishing-template.staple-bottom-right" = "Staple Bottom Right";
// TRANSLATORS: 2 Staples on Bottom
"finishing-template.staple-dual-bottom" = "2 Staples on Bottom";
// TRANSLATORS: 2 Staples on Left
"finishing-template.staple-dual-left" = "2 Staples on Left";
// TRANSLATORS: 2 Staples on Right
"finishing-template.staple-dual-right" = "2 Staples on Right";
// TRANSLATORS: 2 Staples on Top
"finishing-template.staple-dual-top" = "2 Staples on Top";
// TRANSLATORS: Staple Top Left
"finishing-template.staple-top-left" = "Staple Top Left";
// TRANSLATORS: Staple Top Right
"finishing-template.staple-top-right" = "Staple Top Right";
// TRANSLATORS: 3 Staples on Bottom
"finishing-template.staple-triple-bottom" = "3 Staples on Bottom";
// TRANSLATORS: 3 Staples on Left
"finishing-template.staple-triple-left" = "3 Staples on Left";
// TRANSLATORS: 3 Staples on Right
"finishing-template.staple-triple-right" = "3 Staples on Right";
// TRANSLATORS: 3 Staples on Top
"finishing-template.staple-triple-top" = "3 Staples on Top";
// TRANSLATORS: Trim
"finishing-template.trim" = "Trim";
// TRANSLATORS: Trim After Every Set
"finishing-template.trim-after-copies" = "Trim After Every Set";
// TRANSLATORS: Trim After Every Document
"finishing-template.trim-after-documents" = "Trim After Every Document";
// TRANSLATORS: Trim After Job
"finishing-template.trim-after-job" = "Trim After Job";
// TRANSLATORS: Trim After Every Page
"finishing-template.trim-after-pages" = "Trim After Every Page";
// TRANSLATORS: Trim After Every Set
"finishing-template.trim-after-sets" = "Trim After Every Set";
// TRANSLATORS: Trim After Every Page
"finishing-template.trim-after-sheets" = "Trim After Every Page";
// TRANSLATORS: Finishings
"finishings" = "Finishings";
// TRANSLATORS: Finishings
"finishings-col" = "Finishings";
// TRANSLATORS: Fold
"finishings.10" = "Fold";
// TRANSLATORS: Z Fold
"finishings.100" = "Z Fold";
// TRANSLATORS: Engineering Z Fold
"finishings.101" = "Engineering Z Fold";
// TRANSLATORS: Trim
"finishings.11" = "Trim";
// TRANSLATORS: Bale
"finishings.12" = "Bale";
// TRANSLATORS: Booklet Maker
"finishings.13" = "Booklet Maker";
// TRANSLATORS: Jog Offset
"finishings.14" = "Jog Offset";
// TRANSLATORS: Coat
"finishings.15" = "Coat";
// TRANSLATORS: Laminate
"finishings.16" = "Laminate";
// TRANSLATORS: Staple Top Left
"finishings.20" = "Staple Top Left";
// TRANSLATORS: Staple Bottom Left
"finishings.21" = "Staple Bottom Left";
// TRANSLATORS: Staple Top Right
"finishings.22" = "Staple Top Right";
// TRANSLATORS: Staple Bottom Right
"finishings.23" = "Staple Bottom Right";
// TRANSLATORS: Edge Stitch Left
"finishings.24" = "Edge Stitch Left";
// TRANSLATORS: Edge Stitch Top
"finishings.25" = "Edge Stitch Top";
// TRANSLATORS: Edge Stitch Right
"finishings.26" = "Edge Stitch Right";
// TRANSLATORS: Edge Stitch Bottom
"finishings.27" = "Edge Stitch Bottom";
// TRANSLATORS: 2 Staples on Left
"finishings.28" = "2 Staples on Left";
// TRANSLATORS: 2 Staples on Top
"finishings.29" = "2 Staples on Top";
// TRANSLATORS: None
"finishings.3" = "None";
// TRANSLATORS: 2 Staples on Right
"finishings.30" = "2 Staples on Right";
// TRANSLATORS: 2 Staples on Bottom
"finishings.31" = "2 Staples on Bottom";
// TRANSLATORS: 3 Staples on Left
"finishings.32" = "3 Staples on Left";
// TRANSLATORS: 3 Staples on Top
"finishings.33" = "3 Staples on Top";
// TRANSLATORS: 3 Staples on Right
"finishings.34" = "3 Staples on Right";
// TRANSLATORS: 3 Staples on Bottom
"finishings.35" = "3 Staples on Bottom";
// TRANSLATORS: Staple
"finishings.4" = "Staple";
// TRANSLATORS: Punch
"finishings.5" = "Punch";
// TRANSLATORS: Bind Left
"finishings.50" = "Bind Left";
// TRANSLATORS: Bind Top
"finishings.51" = "Bind Top";
// TRANSLATORS: Bind Right
"finishings.52" = "Bind Right";
// TRANSLATORS: Bind Bottom
"finishings.53" = "Bind Bottom";
// TRANSLATORS: Cover
"finishings.6" = "Cover";
// TRANSLATORS: Trim Pages
"finishings.60" = "Trim Pages";
// TRANSLATORS: Trim Documents
"finishings.61" = "Trim Documents";
// TRANSLATORS: Trim Copies
"finishings.62" = "Trim Copies";
// TRANSLATORS: Trim Job
"finishings.63" = "Trim Job";
// TRANSLATORS: Bind
"finishings.7" = "Bind";
// TRANSLATORS: Punch Top Left
"finishings.70" = "Punch Top Left";
// TRANSLATORS: Punch Bottom Left
"finishings.71" = "Punch Bottom Left";
// TRANSLATORS: Punch Top Right
"finishings.72" = "Punch Top Right";
// TRANSLATORS: Punch Bottom Right
"finishings.73" = "Punch Bottom Right";
// TRANSLATORS: 2-hole Punch Left
"finishings.74" = "2-hole Punch Left";
// TRANSLATORS: 2-hole Punch Top
"finishings.75" = "2-hole Punch Top";
// TRANSLATORS: 2-hole Punch Right
"finishings.76" = "2-hole Punch Right";
// TRANSLATORS: 2-hole Punch Bottom
"finishings.77" = "2-hole Punch Bottom";
// TRANSLATORS: 3-hole Punch Left
"finishings.78" = "3-hole Punch Left";
// TRANSLATORS: 3-hole Punch Top
"finishings.79" = "3-hole Punch Top";
// TRANSLATORS: Saddle Stitch
"finishings.8" = "Saddle Stitch";
// TRANSLATORS: 3-hole Punch Right
"finishings.80" = "3-hole Punch Right";
// TRANSLATORS: 3-hole Punch Bottom
"finishings.81" = "3-hole Punch Bottom";
// TRANSLATORS: 4-hole Punch Left
"finishings.82" = "4-hole Punch Left";
// TRANSLATORS: 4-hole Punch Top
"finishings.83" = "4-hole Punch Top";
// TRANSLATORS: 4-hole Punch Right
"finishings.84" = "4-hole Punch Right";
// TRANSLATORS: 4-hole Punch Bottom
"finishings.85" = "4-hole Punch Bottom";
// TRANSLATORS: Multi-hole Punch Left
"finishings.86" = "Multi-hole Punch Left";
// TRANSLATORS: Multi-hole Punch Top
"finishings.87" = "Multi-hole Punch Top";
// TRANSLATORS: Multi-hole Punch Right
"finishings.88" = "Multi-hole Punch Right";
// TRANSLATORS: Multi-hole Punch Bottom
"finishings.89" = "Multi-hole Punch Bottom";
// TRANSLATORS: Edge Stitch
"finishings.9" = "Edge Stitch";
// TRANSLATORS: Accordion Fold
"finishings.90" = "Accordion Fold";
// TRANSLATORS: Double Gate Fold
"finishings.91" = "Double Gate Fold";
// TRANSLATORS: Gate Fold
"finishings.92" = "Gate Fold";
// TRANSLATORS: Half Fold
"finishings.93" = "Half Fold";
// TRANSLATORS: Half Z Fold
"finishings.94" = "Half Z Fold";
// TRANSLATORS: Left Gate Fold
"finishings.95" = "Left Gate Fold";
// TRANSLATORS: Letter Fold
"finishings.96" = "Letter Fold";
// TRANSLATORS: Parallel Fold
"finishings.97" = "Parallel Fold";
// TRANSLATORS: Poster Fold
"finishings.98" = "Poster Fold";
// TRANSLATORS: Right Gate Fold
"finishings.99" = "Right Gate Fold";
// TRANSLATORS: Fold
"folding" = "Fold";
// TRANSLATORS: Fold Direction
"folding-direction" = "Fold Direction";
// TRANSLATORS: Inward
"folding-direction.inward" = "Inward";
// TRANSLATORS: Outward
"folding-direction.outward" = "Outward";
// TRANSLATORS: Fold Position
"folding-offset" = "Fold Position";
// TRANSLATORS: Fold Edge
"folding-reference-edge" = "Fold Edge";
// TRANSLATORS: Bottom
"folding-reference-edge.bottom" = "Bottom";
// TRANSLATORS: Left
"folding-reference-edge.left" = "Left";
// TRANSLATORS: Right
"folding-reference-edge.right" = "Right";
// TRANSLATORS: Top
"folding-reference-edge.top" = "Top";
// TRANSLATORS: Font Name
"font-name-requested" = "Font Name";
// TRANSLATORS: Font Size
"font-size-requested" = "Font Size";
// TRANSLATORS: Force Front Side
"force-front-side" = "Force Front Side";
// TRANSLATORS: From Name
"from-name" = "From Name";
"held" = "held";
"help\t\tGet help on commands." = "help\t\tGet help on commands.";
"idle" = "idle";
// TRANSLATORS: Imposition Template
"imposition-template" = "Imposition Template";
// TRANSLATORS: None
"imposition-template.none" = "None";
// TRANSLATORS: Signature
"imposition-template.signature" = "Signature";
// TRANSLATORS: Insert Page Number
"insert-after-page-number" = "Insert Page Number";
// TRANSLATORS: Insert Count
"insert-count" = "Insert Count";
// TRANSLATORS: Insert Sheet
"insert-sheet" = "Insert Sheet";
"ippeveprinter: Unable to open \"%s\": %s on line %d." = "ippeveprinter: Unable to open “%s”: %s on line %d.";
"ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s";
"ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or.";
"ippfind: Expected key name after %s." = "ippfind: Expected key name after %s.";
"ippfind: Expected port range after %s." = "ippfind: Expected port range after %s.";
"ippfind: Expected program after %s." = "ippfind: Expected program after %s.";
"ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s.";
"ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution.";
"ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis.";
"ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”.";
"ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”.";
"ippfind: Missing key name after %s." = "ippfind: Missing key name after %s.";
"ippfind: Missing name after %s." = "ippfind: Missing name after %s.";
"ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis.";
"ippfind: Missing program after %s." = "ippfind: Missing program after %s.";
"ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s.";
"ippfind: Missing semi-colon after %s." = "ippfind: Missing semi-colon after %s.";
"ippfind: Out of memory." = "ippfind: Out of memory.";
"ippfind: Too many parenthesis." = "ippfind: Too many parenthesis.";
"ippfind: Unable to browse or resolve: %s" = "ippfind: Unable to browse or resolve: %s";
"ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s";
"ippfind: Unable to use Bonjour: %s" = "ippfind: Unable to use Bonjour: %s";
"ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”.";
"ipptool: \"-i\" and \"-n\" are incompatible with \"--ippserver\", \"-P\", and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “--ippserver”, “-P”, and “-X”.";
"ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”.";
"ipptool: Bad URI \"%s\"." = "ipptool: Bad URI “%s”.";
"ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”.";
"ipptool: May only specify a single URI." = "ipptool: May only specify a single URI.";
"ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”.";
"ipptool: Missing filename for \"--ippserver\"." = "ipptool: Missing filename for “--ippserver”.";
"ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”.";
"ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”.";
"ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”.";
"ipptool: URI required before test file." = "ipptool: URI required before test file.";
// TRANSLATORS: Job Account ID
"job-account-id" = "Job Account ID";
// TRANSLATORS: Job Account Type
"job-account-type" = "Job Account Type";
// TRANSLATORS: General
"job-account-type.general" = "General";
// TRANSLATORS: Group
"job-account-type.group" = "Group";
// TRANSLATORS: None
"job-account-type.none" = "None";
// TRANSLATORS: Job Accounting Output Bin
"job-accounting-output-bin" = "Job Accounting Output Bin";
// TRANSLATORS: Job Accounting Sheets
"job-accounting-sheets" = "Job Accounting Sheets";
// TRANSLATORS: Type of Job Accounting Sheets
"job-accounting-sheets-type" = "Type of Job Accounting Sheets";
// TRANSLATORS: None
"job-accounting-sheets-type.none" = "None";
// TRANSLATORS: Standard
"job-accounting-sheets-type.standard" = "Standard";
// TRANSLATORS: Job Accounting User ID
"job-accounting-user-id" = "Job Accounting User ID";
// TRANSLATORS: Job Cancel After
"job-cancel-after" = "Cancel job after";
// TRANSLATORS: Copies
"job-copies" = "Copies";
// TRANSLATORS: Back Cover
"job-cover-back" = "Back Cover";
// TRANSLATORS: Front Cover
"job-cover-front" = "Front Cover";
// TRANSLATORS: Delay Output Until
"job-delay-output-until" = "Delay Output Until";
// TRANSLATORS: Delay Output Until
"job-delay-output-until-time" = "Delay Output Until";
// TRANSLATORS: Daytime
"job-delay-output-until.day-time" = "Daytime";
// TRANSLATORS: Evening
"job-delay-output-until.evening" = "Evening";
// TRANSLATORS: Released
"job-delay-output-until.indefinite" = "Released";
// TRANSLATORS: Night
"job-delay-output-until.night" = "Night";
// TRANSLATORS: No Delay
"job-delay-output-until.no-delay-output" = "No Delay";
// TRANSLATORS: Second Shift
"job-delay-output-until.second-shift" = "Second Shift";
// TRANSLATORS: Third Shift
"job-delay-output-until.third-shift" = "Third Shift";
// TRANSLATORS: Weekend
"job-delay-output-until.weekend" = "Weekend";
// TRANSLATORS: On Error
"job-error-action" = "On Error";
// TRANSLATORS: Abort Job
"job-error-action.abort-job" = "Abort Job";
// TRANSLATORS: Cancel Job
"job-error-action.cancel-job" = "Cancel Job";
// TRANSLATORS: Continue Job
"job-error-action.continue-job" = "Continue Job";
// TRANSLATORS: Suspend Job
"job-error-action.suspend-job" = "Suspend Job";
// TRANSLATORS: Print Error Sheet
"job-error-sheet" = "Print Error Sheet";
// TRANSLATORS: Type of Error Sheet
"job-error-sheet-type" = "Type of Error Sheet";
// TRANSLATORS: None
"job-error-sheet-type.none" = "None";
// TRANSLATORS: Standard
"job-error-sheet-type.standard" = "Standard";
// TRANSLATORS: Print Error Sheet
"job-error-sheet-when" = "Print Error Sheet";
// TRANSLATORS: Always
"job-error-sheet-when.always" = "Always";
// TRANSLATORS: On Error
"job-error-sheet-when.on-error" = "On Error";
// TRANSLATORS: Job Finishings
"job-finishings" = "Job Finishings";
// TRANSLATORS: Hold Until
"job-hold-until" = "Hold Until";
// TRANSLATORS: Hold Until
"job-hold-until-time" = "Hold Until";
// TRANSLATORS: Daytime
"job-hold-until.day-time" = "Daytime";
// TRANSLATORS: Evening
"job-hold-until.evening" = "Evening";
// TRANSLATORS: Released
"job-hold-until.indefinite" = "Released";
// TRANSLATORS: Night
"job-hold-until.night" = "Night";
// TRANSLATORS: No Hold
"job-hold-until.no-hold" = "No Hold";
// TRANSLATORS: Second Shift
"job-hold-until.second-shift" = "Second Shift";
// TRANSLATORS: Third Shift
"job-hold-until.third-shift" = "Third Shift";
// TRANSLATORS: Weekend
"job-hold-until.weekend" = "Weekend";
// TRANSLATORS: Job Mandatory Attributes
"job-mandatory-attributes" = "Job Mandatory Attributes";
// TRANSLATORS: Title
"job-name" = "Title";
// TRANSLATORS: Job Pages
"job-pages" = "Job Pages";
// TRANSLATORS: Job Pages
"job-pages-col" = "Job Pages";
// TRANSLATORS: Job Phone Number
"job-phone-number" = "Job Phone Number";
"job-printer-uri attribute missing." = "job-printer-uri attribute missing.";
// TRANSLATORS: Job Priority
"job-priority" = "Job Priority";
// TRANSLATORS: Job Privacy Attributes
"job-privacy-attributes" = "Job Privacy Attributes";
// TRANSLATORS: All
"job-privacy-attributes.all" = "All";
// TRANSLATORS: Default
"job-privacy-attributes.default" = "Default";
// TRANSLATORS: Job Description
"job-privacy-attributes.job-description" = "Job Description";
// TRANSLATORS: Job Template
"job-privacy-attributes.job-template" = "Job Template";
// TRANSLATORS: None
"job-privacy-attributes.none" = "None";
// TRANSLATORS: Job Privacy Scope
"job-privacy-scope" = "Job Privacy Scope";
// TRANSLATORS: All
"job-privacy-scope.all" = "All";
// TRANSLATORS: Default
"job-privacy-scope.default" = "Default";
// TRANSLATORS: None
"job-privacy-scope.none" = "None";
// TRANSLATORS: Owner
"job-privacy-scope.owner" = "Owner";
// TRANSLATORS: Job Recipient Name
"job-recipient-name" = "Job Recipient Name";
// TRANSLATORS: Job Retain Until
"job-retain-until" = "Retain job until";
// TRANSLATORS: Job Retain Until Interval
"job-retain-until-interval" = "Retain job until interval";
// TRANSLATORS: Job Retain Until Time
"job-retain-until-time" = "Retain job until time";
// TRANSLATORS: End Of Day
"job-retain-until.end-of-day" = "End of day";
// TRANSLATORS: End Of Month
"job-retain-until.end-of-month" = "End of month";
// TRANSLATORS: End Of Week
"job-retain-until.end-of-week" = "End of week";
// TRANSLATORS: Indefinite
"job-retain-until.indefinite" = "Indefinitely";
// TRANSLATORS: None
"job-retain-until.none" = "Never";
// TRANSLATORS: Job Save Disposition
"job-save-disposition" = "Job Save Disposition";
// TRANSLATORS: Job Sheet Message
"job-sheet-message" = "Job Sheet Message";
// TRANSLATORS: Banner Page
"job-sheets" = "Banner Page";
// TRANSLATORS: Banner Page
"job-sheets-col" = "Banner Page";
// TRANSLATORS: First Page in Document
"job-sheets.first-print-stream-page" = "First Page in Document";
// TRANSLATORS: Start and End Sheets
"job-sheets.job-both-sheet" = "Start and End Sheets";
// TRANSLATORS: End Sheet
"job-sheets.job-end-sheet" = "End Sheet";
// TRANSLATORS: Start Sheet
"job-sheets.job-start-sheet" = "Start Sheet";
// TRANSLATORS: None
"job-sheets.none" = "None";
// TRANSLATORS: Standard
"job-sheets.standard" = "Standard";
// TRANSLATORS: Job State
"job-state" = "Job State";
// TRANSLATORS: Job State Message
"job-state-message" = "Job State Message";
// TRANSLATORS: Detailed Job State
"job-state-reasons" = "Detailed Job State";
// TRANSLATORS: Stopping
"job-state-reasons.aborted-by-system" = "Aborted By System";
// TRANSLATORS: Account Authorization Failed
"job-state-reasons.account-authorization-failed" = "Account Authorization Failed";
// TRANSLATORS: Account Closed
"job-state-reasons.account-closed" = "Account Closed";
// TRANSLATORS: Account Info Needed
"job-state-reasons.account-info-needed" = "Account Info Needed";
// TRANSLATORS: Account Limit Reached
"job-state-reasons.account-limit-reached" = "Account Limit Reached";
// TRANSLATORS: Decompression error
"job-state-reasons.compression-error" = "Compression Error";
// TRANSLATORS: Conflicting Attributes
"job-state-reasons.conflicting-attributes" = "Conflicting Attributes";
// TRANSLATORS: Connected To Destination
"job-state-reasons.connected-to-destination" = "Connected To Destination";
// TRANSLATORS: Connecting To Destination
"job-state-reasons.connecting-to-destination" = "Connecting To Destination";
// TRANSLATORS: Destination Uri Failed
"job-state-reasons.destination-uri-failed" = "Destination Uri Failed";
// TRANSLATORS: Digital Signature Did Not Verify
"job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
// TRANSLATORS: Digital Signature Type Not Supported
"job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
// TRANSLATORS: Document Access Error
"job-state-reasons.document-access-error" = "Document Access Error";
// TRANSLATORS: Document Format Error
"job-state-reasons.document-format-error" = "Document Format Error";
// TRANSLATORS: Document Password Error
"job-state-reasons.document-password-error" = "Document Password Error";
// TRANSLATORS: Document Permission Error
"job-state-reasons.document-permission-error" = "Document Permission Error";
// TRANSLATORS: Document Security Error
"job-state-reasons.document-security-error" = "Document Security Error";
// TRANSLATORS: Document Unprintable Error
"job-state-reasons.document-unprintable-error" = "Document Unprintable Error";
// TRANSLATORS: Errors Detected
"job-state-reasons.errors-detected" = "Errors Detected";
// TRANSLATORS: Canceled at printer
"job-state-reasons.job-canceled-at-device" = "Job Canceled At Device";
// TRANSLATORS: Canceled by operator
"job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator";
// TRANSLATORS: Canceled by user
"job-state-reasons.job-canceled-by-user" = "Job Canceled By User";
// TRANSLATORS:
"job-state-reasons.job-completed-successfully" = "Job Completed Successfully";
// TRANSLATORS: Completed with errors
"job-state-reasons.job-completed-with-errors" = "Job Completed With Errors";
// TRANSLATORS: Completed with warnings
"job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings";
// TRANSLATORS: Insufficient data
"job-state-reasons.job-data-insufficient" = "Job Data Insufficient";
// TRANSLATORS: Job Delay Output Until Specified
"job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified";
// TRANSLATORS: Job Digital Signature Wait
"job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait";
// TRANSLATORS: Job Fetchable
"job-state-reasons.job-fetchable" = "Job Fetchable";
// TRANSLATORS: Job Held For Review
"job-state-reasons.job-held-for-review" = "Job Held For Review";
// TRANSLATORS: Job held
"job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified";
// TRANSLATORS: Incoming
"job-state-reasons.job-incoming" = "Job Incoming";
// TRANSLATORS: Interpreting
"job-state-reasons.job-interpreting" = "Job Interpreting";
// TRANSLATORS: Outgoing
"job-state-reasons.job-outgoing" = "Job Outgoing";
// TRANSLATORS: Job Password Wait
"job-state-reasons.job-password-wait" = "Job Password Wait";
// TRANSLATORS: Job Printed Successfully
"job-state-reasons.job-printed-successfully" = "Job Printed Successfully";
// TRANSLATORS: Job Printed With Errors
"job-state-reasons.job-printed-with-errors" = "Job Printed With Errors";
// TRANSLATORS: Job Printed With Warnings
"job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings";
// TRANSLATORS: Printing
"job-state-reasons.job-printing" = "Job Printing";
// TRANSLATORS: Preparing to print
"job-state-reasons.job-queued" = "Job Queued";
// TRANSLATORS: Processing document
"job-state-reasons.job-queued-for-marker" = "Job Queued For Marker";
// TRANSLATORS: Job Release Wait
"job-state-reasons.job-release-wait" = "Job Release Wait";
// TRANSLATORS: Restartable
"job-state-reasons.job-restartable" = "Job Restartable";
// TRANSLATORS: Job Resuming
"job-state-reasons.job-resuming" = "Job Resuming";
// TRANSLATORS: Job Saved Successfully
"job-state-reasons.job-saved-successfully" = "Job Saved Successfully";
// TRANSLATORS: Job Saved With Errors
"job-state-reasons.job-saved-with-errors" = "Job Saved With Errors";
// TRANSLATORS: Job Saved With Warnings
"job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings";
// TRANSLATORS: Job Saving
"job-state-reasons.job-saving" = "Job Saving";
// TRANSLATORS: Job Spooling
"job-state-reasons.job-spooling" = "Job Spooling";
// TRANSLATORS: Job Streaming
"job-state-reasons.job-streaming" = "Job Streaming";
// TRANSLATORS: Suspended
"job-state-reasons.job-suspended" = "Job Suspended";
// TRANSLATORS: Job Suspended By Operator
"job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator";
// TRANSLATORS: Job Suspended By System
"job-state-reasons.job-suspended-by-system" = "Job Suspended By System";
// TRANSLATORS: Job Suspended By User
"job-state-reasons.job-suspended-by-user" = "Job Suspended By User";
// TRANSLATORS: Job Suspending
"job-state-reasons.job-suspending" = "Job Suspending";
// TRANSLATORS: Job Transferring
"job-state-reasons.job-transferring" = "Job Transferring";
// TRANSLATORS: Transforming
"job-state-reasons.job-transforming" = "Job Transforming";
// TRANSLATORS: None
"job-state-reasons.none" = "None";
// TRANSLATORS: Printer offline
"job-state-reasons.printer-stopped" = "Printer Stopped";
// TRANSLATORS: Printer partially stopped
"job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly";
// TRANSLATORS: Stopping
"job-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
// TRANSLATORS: Ready
"job-state-reasons.queued-in-device" = "Queued In Device";
// TRANSLATORS: Resources Are Not Ready
"job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
// TRANSLATORS: Resources Are Not Supported
"job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
// TRANSLATORS: Service offline
"job-state-reasons.service-off-line" = "Service Off Line";
// TRANSLATORS: Submission Interrupted
"job-state-reasons.submission-interrupted" = "Submission Interrupted";
// TRANSLATORS: Unsupported Attributes Or Values
"job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values";
// TRANSLATORS: Unsupported Compression
"job-state-reasons.unsupported-compression" = "Unsupported Compression";
// TRANSLATORS: Unsupported Document Format
"job-state-reasons.unsupported-document-format" = "Unsupported Document Format";
// TRANSLATORS: Waiting For User Action
"job-state-reasons.waiting-for-user-action" = "Waiting For User Action";
// TRANSLATORS: Warnings Detected
"job-state-reasons.warnings-detected" = "Warnings Detected";
// TRANSLATORS: Pending
"job-state.3" = "Pending";
// TRANSLATORS: Held
"job-state.4" = "Held";
// TRANSLATORS: Processing
"job-state.5" = "Processing";
// TRANSLATORS: Stopped
"job-state.6" = "Stopped";
// TRANSLATORS: Canceled
"job-state.7" = "Canceled";
// TRANSLATORS: Aborted
"job-state.8" = "Aborted";
// TRANSLATORS: Completed
"job-state.9" = "Completed";
// TRANSLATORS: Laminate Pages
"laminating" = "Laminate Pages";
// TRANSLATORS: Laminate
"laminating-sides" = "Laminate";
// TRANSLATORS: Back Only
"laminating-sides.back" = "Back Only";
// TRANSLATORS: Front and Back
"laminating-sides.both" = "Front and Back";
// TRANSLATORS: Front Only
"laminating-sides.front" = "Front Only";
// TRANSLATORS: Type of Lamination
"laminating-type" = "Type of Lamination";
// TRANSLATORS: Archival
"laminating-type.archival" = "Archival";
// TRANSLATORS: Glossy
"laminating-type.glossy" = "Glossy";
// TRANSLATORS: High Gloss
"laminating-type.high-gloss" = "High Gloss";
// TRANSLATORS: Matte
"laminating-type.matte" = "Matte";
// TRANSLATORS: Semi-gloss
"laminating-type.semi-gloss" = "Semi-gloss";
// TRANSLATORS: Translucent
"laminating-type.translucent" = "Translucent";
// TRANSLATORS: Logo
"logo" = "Logo";
"lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters.";
"lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option.";
"lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option.";
"lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option.";
"lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option.";
"lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option.";
"lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option.";
"lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option.";
"lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option.";
"lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option.";
"lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option.";
"lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option.";
"lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option.";
"lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option.";
"lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option.";
"lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option.";
"lpadmin: No member names were seen." = "lpadmin: No member names were seen.";
"lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s.";
"lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s.";
"lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS." = "lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.";
"lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters.";
"lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS." = "lpadmin: Raw queues are deprecated and will stop working in a future version of CUPS.";
"lpadmin: Raw queues are no longer supported on macOS." = "lpadmin: Raw queues are no longer supported on macOS.";
"lpadmin: System V interface scripts are no longer supported for security reasons." = "lpadmin: System V interface scripts are no longer supported for security reasons.";
"lpadmin: Unable to add a printer to the class:\n You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n You must specify a printer name first.";
"lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s";
"lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file";
"lpadmin: Unable to delete option:\n You must specify a printer name first." = "lpadmin: Unable to delete option:\n You must specify a printer name first.";
"lpadmin: Unable to open PPD \"%s\": %s" = "lpadmin: Unable to open PPD “%s”: %s";
"lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d.";
"lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n You must specify a printer name first.";
"lpadmin: Unable to set the printer options:\n You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n You must specify a printer name first.";
"lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”.";
"lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”.";
"lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”.";
"lpadmin: Use the 'everywhere' model for shared printers." = "lpadmin: Use the ‘everywhere’ model for shared printers.";
"lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored.";
"lpc> " = "lpc> ";
"lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”.";
"lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”.";
"lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”.";
"lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”.";
"lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”.";
"lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”.";
"lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”.";
"lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s";
"lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”.";
"lpoptions: No printers." = "lpoptions: No printers.";
"lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s";
"lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s";
"lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s.";
"lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class.";
"lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination \"%s\".";
// TRANSLATORS: Amount of Material
"material-amount" = "Amount of Material";
// TRANSLATORS: Amount Units
"material-amount-units" = "Amount Units";
// TRANSLATORS: Grams
"material-amount-units.g" = "Grams";
// TRANSLATORS: Kilograms
"material-amount-units.kg" = "Kilograms";
// TRANSLATORS: Liters
"material-amount-units.l" = "Liters";
// TRANSLATORS: Meters
"material-amount-units.m" = "Meters";
// TRANSLATORS: Milliliters
"material-amount-units.ml" = "Milliliters";
// TRANSLATORS: Millimeters
"material-amount-units.mm" = "Millimeters";
// TRANSLATORS: Material Color
"material-color" = "Material Color";
// TRANSLATORS: Material Diameter
"material-diameter" = "Material Diameter";
// TRANSLATORS: Material Diameter Tolerance
"material-diameter-tolerance" = "Material Diameter Tolerance";
// TRANSLATORS: Material Fill Density
"material-fill-density" = "Material Fill Density";
// TRANSLATORS: Material Name
"material-name" = "Material Name";
// TRANSLATORS: Material Nozzle Diameter
"material-nozzle-diameter" = "Material Nozzle Diameter";
// TRANSLATORS: Use Material For
"material-purpose" = "Use Material For";
// TRANSLATORS: Everything
"material-purpose.all" = "Everything";
// TRANSLATORS: Base
"material-purpose.base" = "Base";
// TRANSLATORS: In-fill
"material-purpose.in-fill" = "In-fill";
// TRANSLATORS: Shell
"material-purpose.shell" = "Shell";
// TRANSLATORS: Supports
"material-purpose.support" = "Supports";
// TRANSLATORS: Feed Rate
"material-rate" = "Feed Rate";
// TRANSLATORS: Feed Rate Units
"material-rate-units" = "Feed Rate Units";
// TRANSLATORS: Milligrams per second
"material-rate-units.mg_second" = "Milligrams per second";
// TRANSLATORS: Milliliters per second
"material-rate-units.ml_second" = "Milliliters per second";
// TRANSLATORS: Millimeters per second
"material-rate-units.mm_second" = "Millimeters per second";
// TRANSLATORS: Material Retraction
"material-retraction" = "Material Retraction";
// TRANSLATORS: Material Shell Thickness
"material-shell-thickness" = "Material Shell Thickness";
// TRANSLATORS: Material Temperature
"material-temperature" = "Material Temperature";
// TRANSLATORS: Material Type
"material-type" = "Material Type";
// TRANSLATORS: ABS
"material-type.abs" = "ABS";
// TRANSLATORS: Carbon Fiber ABS
"material-type.abs-carbon-fiber" = "Carbon Fiber ABS";
// TRANSLATORS: Carbon Nanotube ABS
"material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS";
// TRANSLATORS: Chocolate
"material-type.chocolate" = "Chocolate";
// TRANSLATORS: Gold
"material-type.gold" = "Gold";
// TRANSLATORS: Nylon
"material-type.nylon" = "Nylon";
// TRANSLATORS: Pet
"material-type.pet" = "Pet";
// TRANSLATORS: Photopolymer
"material-type.photopolymer" = "Photopolymer";
// TRANSLATORS: PLA
"material-type.pla" = "PLA";
// TRANSLATORS: Conductive PLA
"material-type.pla-conductive" = "Conductive PLA";
// TRANSLATORS: Pla Dissolvable
"material-type.pla-dissolvable" = "Pla Dissolvable";
// TRANSLATORS: Flexible PLA
"material-type.pla-flexible" = "Flexible PLA";
// TRANSLATORS: Magnetic PLA
"material-type.pla-magnetic" = "Magnetic PLA";
// TRANSLATORS: Steel PLA
"material-type.pla-steel" = "Steel PLA";
// TRANSLATORS: Stone PLA
"material-type.pla-stone" = "Stone PLA";
// TRANSLATORS: Wood PLA
"material-type.pla-wood" = "Wood PLA";
// TRANSLATORS: Polycarbonate
"material-type.polycarbonate" = "Polycarbonate";
// TRANSLATORS: Dissolvable PVA
"material-type.pva-dissolvable" = "Dissolvable PVA";
// TRANSLATORS: Silver
"material-type.silver" = "Silver";
// TRANSLATORS: Titanium
"material-type.titanium" = "Titanium";
// TRANSLATORS: Wax
"material-type.wax" = "Wax";
// TRANSLATORS: Materials
"materials-col" = "Materials";
// TRANSLATORS: Media
"media" = "Media";
// TRANSLATORS: Back Coating of Media
"media-back-coating" = "Back Coating of Media";
// TRANSLATORS: Glossy
"media-back-coating.glossy" = "Glossy";
// TRANSLATORS: High Gloss
"media-back-coating.high-gloss" = "High Gloss";
// TRANSLATORS: Matte
"media-back-coating.matte" = "Matte";
// TRANSLATORS: None
"media-back-coating.none" = "None";
// TRANSLATORS: Satin
"media-back-coating.satin" = "Satin";
// TRANSLATORS: Semi-gloss
"media-back-coating.semi-gloss" = "Semi-gloss";
// TRANSLATORS: Media Bottom Margin
"media-bottom-margin" = "Media Bottom Margin";
// TRANSLATORS: Media
"media-col" = "Media";
// TRANSLATORS: Media Color
"media-color" = "Media Color";
// TRANSLATORS: Black
"media-color.black" = "Black";
// TRANSLATORS: Blue
"media-color.blue" = "Blue";
// TRANSLATORS: Brown
"media-color.brown" = "Brown";
// TRANSLATORS: Buff
"media-color.buff" = "Buff";
// TRANSLATORS: Clear Black
"media-color.clear-black" = "Clear Black";
// TRANSLATORS: Clear Blue
"media-color.clear-blue" = "Clear Blue";
// TRANSLATORS: Clear Brown
"media-color.clear-brown" = "Clear Brown";
// TRANSLATORS: Clear Buff
"media-color.clear-buff" = "Clear Buff";
// TRANSLATORS: Clear Cyan
"media-color.clear-cyan" = "Clear Cyan";
// TRANSLATORS: Clear Gold
"media-color.clear-gold" = "Clear Gold";
// TRANSLATORS: Clear Goldenrod
"media-color.clear-goldenrod" = "Clear Goldenrod";
// TRANSLATORS: Clear Gray
"media-color.clear-gray" = "Clear Gray";
// TRANSLATORS: Clear Green
"media-color.clear-green" = "Clear Green";
// TRANSLATORS: Clear Ivory
"media-color.clear-ivory" = "Clear Ivory";
// TRANSLATORS: Clear Magenta
"media-color.clear-magenta" = "Clear Magenta";
// TRANSLATORS: Clear Multi Color
"media-color.clear-multi-color" = "Clear Multi Color";
// TRANSLATORS: Clear Mustard
"media-color.clear-mustard" = "Clear Mustard";
// TRANSLATORS: Clear Orange
"media-color.clear-orange" = "Clear Orange";
// TRANSLATORS: Clear Pink
"media-color.clear-pink" = "Clear Pink";
// TRANSLATORS: Clear Red
"media-color.clear-red" = "Clear Red";
// TRANSLATORS: Clear Silver
"media-color.clear-silver" = "Clear Silver";
// TRANSLATORS: Clear Turquoise
"media-color.clear-turquoise" = "Clear Turquoise";
// TRANSLATORS: Clear Violet
"media-color.clear-violet" = "Clear Violet";
// TRANSLATORS: Clear White
"media-color.clear-white" = "Clear White";
// TRANSLATORS: Clear Yellow
"media-color.clear-yellow" = "Clear Yellow";
// TRANSLATORS: Cyan
"media-color.cyan" = "Cyan";
// TRANSLATORS: Dark Blue
"media-color.dark-blue" = "Dark Blue";
// TRANSLATORS: Dark Brown
"media-color.dark-brown" = "Dark Brown";
// TRANSLATORS: Dark Buff
"media-color.dark-buff" = "Dark Buff";
// TRANSLATORS: Dark Cyan
"media-color.dark-cyan" = "Dark Cyan";
// TRANSLATORS: Dark Gold
"media-color.dark-gold" = "Dark Gold";
// TRANSLATORS: Dark Goldenrod
"media-color.dark-goldenrod" = "Dark Goldenrod";
// TRANSLATORS: Dark Gray
"media-color.dark-gray" = "Dark Gray";
// TRANSLATORS: Dark Green
"media-color.dark-green" = "Dark Green";
// TRANSLATORS: Dark Ivory
"media-color.dark-ivory" = "Dark Ivory";
// TRANSLATORS: Dark Magenta
"media-color.dark-magenta" = "Dark Magenta";
// TRANSLATORS: Dark Mustard
"media-color.dark-mustard" = "Dark Mustard";
// TRANSLATORS: Dark Orange
"media-color.dark-orange" = "Dark Orange";
// TRANSLATORS: Dark Pink
"media-color.dark-pink" = "Dark Pink";
// TRANSLATORS: Dark Red
"media-color.dark-red" = "Dark Red";
// TRANSLATORS: Dark Silver
"media-color.dark-silver" = "Dark Silver";
// TRANSLATORS: Dark Turquoise
"media-color.dark-turquoise" = "Dark Turquoise";
// TRANSLATORS: Dark Violet
"media-color.dark-violet" = "Dark Violet";
// TRANSLATORS: Dark Yellow
"media-color.dark-yellow" = "Dark Yellow";
// TRANSLATORS: Gold
"media-color.gold" = "Gold";
// TRANSLATORS: Goldenrod
"media-color.goldenrod" = "Goldenrod";
// TRANSLATORS: Gray
"media-color.gray" = "Gray";
// TRANSLATORS: Green
"media-color.green" = "Green";
// TRANSLATORS: Ivory
"media-color.ivory" = "Ivory";
// TRANSLATORS: Light Black
"media-color.light-black" = "Light Black";
// TRANSLATORS: Light Blue
"media-color.light-blue" = "Light Blue";
// TRANSLATORS: Light Brown
"media-color.light-brown" = "Light Brown";
// TRANSLATORS: Light Buff
"media-color.light-buff" = "Light Buff";
// TRANSLATORS: Light Cyan
"media-color.light-cyan" = "Light Cyan";
// TRANSLATORS: Light Gold
"media-color.light-gold" = "Light Gold";
// TRANSLATORS: Light Goldenrod
"media-color.light-goldenrod" = "Light Goldenrod";
// TRANSLATORS: Light Gray
"media-color.light-gray" = "Light Gray";
// TRANSLATORS: Light Green
"media-color.light-green" = "Light Green";
// TRANSLATORS: Light Ivory
"media-color.light-ivory" = "Light Ivory";
// TRANSLATORS: Light Magenta
"media-color.light-magenta" = "Light Magenta";
// TRANSLATORS: Light Mustard
"media-color.light-mustard" = "Light Mustard";
// TRANSLATORS: Light Orange
"media-color.light-orange" = "Light Orange";
// TRANSLATORS: Light Pink
"media-color.light-pink" = "Light Pink";
// TRANSLATORS: Light Red
"media-color.light-red" = "Light Red";
// TRANSLATORS: Light Silver
"media-color.light-silver" = "Light Silver";
// TRANSLATORS: Light Turquoise
"media-color.light-turquoise" = "Light Turquoise";
// TRANSLATORS: Light Violet
"media-color.light-violet" = "Light Violet";
// TRANSLATORS: Light Yellow
"media-color.light-yellow" = "Light Yellow";
// TRANSLATORS: Magenta
"media-color.magenta" = "Magenta";
// TRANSLATORS: Multi-color
"media-color.multi-color" = "Multi-color";
// TRANSLATORS: Mustard
"media-color.mustard" = "Mustard";
// TRANSLATORS: No Color
"media-color.no-color" = "No Color";
// TRANSLATORS: Orange
"media-color.orange" = "Orange";
// TRANSLATORS: Pink
"media-color.pink" = "Pink";
// TRANSLATORS: Red
"media-color.red" = "Red";
// TRANSLATORS: Silver
"media-color.silver" = "Silver";
// TRANSLATORS: Turquoise
"media-color.turquoise" = "Turquoise";
// TRANSLATORS: Violet
"media-color.violet" = "Violet";
// TRANSLATORS: White
"media-color.white" = "White";
// TRANSLATORS: Yellow
"media-color.yellow" = "Yellow";
// TRANSLATORS: Front Coating of Media
"media-front-coating" = "Front Coating of Media";
// TRANSLATORS: Media Grain
"media-grain" = "Media Grain";
// TRANSLATORS: Cross-Feed Direction
"media-grain.x-direction" = "Cross-Feed Direction";
// TRANSLATORS: Feed Direction
"media-grain.y-direction" = "Feed Direction";
// TRANSLATORS: Media Hole Count
"media-hole-count" = "Media Hole Count";
// TRANSLATORS: Media Info
"media-info" = "Media Info";
// TRANSLATORS: Force Media
"media-input-tray-check" = "Force Media";
// TRANSLATORS: Media Left Margin
"media-left-margin" = "Media Left Margin";
// TRANSLATORS: Pre-printed Media
"media-pre-printed" = "Pre-printed Media";
// TRANSLATORS: Blank
"media-pre-printed.blank" = "Blank";
// TRANSLATORS: Letterhead
"media-pre-printed.letter-head" = "Letterhead";
// TRANSLATORS: Pre-printed
"media-pre-printed.pre-printed" = "Pre-printed";
// TRANSLATORS: Recycled Media
"media-recycled" = "Recycled Media";
// TRANSLATORS: None
"media-recycled.none" = "None";
// TRANSLATORS: Standard
"media-recycled.standard" = "Standard";
// TRANSLATORS: Media Right Margin
"media-right-margin" = "Media Right Margin";
// TRANSLATORS: Media Dimensions
"media-size" = "Media Dimensions";
// TRANSLATORS: Media Name
"media-size-name" = "Media Name";
// TRANSLATORS: Media Source
"media-source" = "Media Source";
// TRANSLATORS: Alternate
"media-source.alternate" = "Alternate";
// TRANSLATORS: Alternate Roll
"media-source.alternate-roll" = "Alternate Roll";
// TRANSLATORS: Automatic
"media-source.auto" = "Automatic";
// TRANSLATORS: Bottom
"media-source.bottom" = "Bottom";
// TRANSLATORS: By-pass Tray
"media-source.by-pass-tray" = "By-pass Tray";
// TRANSLATORS: Center
"media-source.center" = "Center";
// TRANSLATORS: Disc
"media-source.disc" = "Disc";
// TRANSLATORS: Envelope
"media-source.envelope" = "Envelope";
// TRANSLATORS: Hagaki
"media-source.hagaki" = "Hagaki";
// TRANSLATORS: Large Capacity
"media-source.large-capacity" = "Large Capacity";
// TRANSLATORS: Left
"media-source.left" = "Left";
// TRANSLATORS: Main
"media-source.main" = "Main";
// TRANSLATORS: Main Roll
"media-source.main-roll" = "Main Roll";
// TRANSLATORS: Manual
"media-source.manual" = "Manual";
// TRANSLATORS: Middle
"media-source.middle" = "Middle";
// TRANSLATORS: Photo
"media-source.photo" = "Photo";
// TRANSLATORS: Rear
"media-source.rear" = "Rear";
// TRANSLATORS: Right
"media-source.right" = "Right";
// TRANSLATORS: Roll 1
"media-source.roll-1" = "Roll 1";
// TRANSLATORS: Roll 10
"media-source.roll-10" = "Roll 10";
// TRANSLATORS: Roll 2
"media-source.roll-2" = "Roll 2";
// TRANSLATORS: Roll 3
"media-source.roll-3" = "Roll 3";
// TRANSLATORS: Roll 4
"media-source.roll-4" = "Roll 4";
// TRANSLATORS: Roll 5
"media-source.roll-5" = "Roll 5";
// TRANSLATORS: Roll 6
"media-source.roll-6" = "Roll 6";
// TRANSLATORS: Roll 7
"media-source.roll-7" = "Roll 7";
// TRANSLATORS: Roll 8
"media-source.roll-8" = "Roll 8";
// TRANSLATORS: Roll 9
"media-source.roll-9" = "Roll 9";
// TRANSLATORS: Side
"media-source.side" = "Side";
// TRANSLATORS: Top
"media-source.top" = "Top";
// TRANSLATORS: Tray 1
"media-source.tray-1" = "Tray 1";
// TRANSLATORS: Tray 10
"media-source.tray-10" = "Tray 10";
// TRANSLATORS: Tray 11
"media-source.tray-11" = "Tray 11";
// TRANSLATORS: Tray 12
"media-source.tray-12" = "Tray 12";
// TRANSLATORS: Tray 13
"media-source.tray-13" = "Tray 13";
// TRANSLATORS: Tray 14
"media-source.tray-14" = "Tray 14";
// TRANSLATORS: Tray 15
"media-source.tray-15" = "Tray 15";
// TRANSLATORS: Tray 16
"media-source.tray-16" = "Tray 16";
// TRANSLATORS: Tray 17
"media-source.tray-17" = "Tray 17";
// TRANSLATORS: Tray 18
"media-source.tray-18" = "Tray 18";
// TRANSLATORS: Tray 19
"media-source.tray-19" = "Tray 19";
// TRANSLATORS: Tray 2
"media-source.tray-2" = "Tray 2";
// TRANSLATORS: Tray 20
"media-source.tray-20" = "Tray 20";
// TRANSLATORS: Tray 3
"media-source.tray-3" = "Tray 3";
// TRANSLATORS: Tray 4
"media-source.tray-4" = "Tray 4";
// TRANSLATORS: Tray 5
"media-source.tray-5" = "Tray 5";
// TRANSLATORS: Tray 6
"media-source.tray-6" = "Tray 6";
// TRANSLATORS: Tray 7
"media-source.tray-7" = "Tray 7";
// TRANSLATORS: Tray 8
"media-source.tray-8" = "Tray 8";
// TRANSLATORS: Tray 9
"media-source.tray-9" = "Tray 9";
// TRANSLATORS: Media Thickness
"media-thickness" = "Media Thickness";
// TRANSLATORS: Media Tooth (Texture)
"media-tooth" = "Media Tooth (Texture)";
// TRANSLATORS: Antique
"media-tooth.antique" = "Antique";
// TRANSLATORS: Extra Smooth
"media-tooth.calendared" = "Extra Smooth";
// TRANSLATORS: Coarse
"media-tooth.coarse" = "Coarse";
// TRANSLATORS: Fine
"media-tooth.fine" = "Fine";
// TRANSLATORS: Linen
"media-tooth.linen" = "Linen";
// TRANSLATORS: Medium
"media-tooth.medium" = "Medium";
// TRANSLATORS: Smooth
"media-tooth.smooth" = "Smooth";
// TRANSLATORS: Stipple
"media-tooth.stipple" = "Stipple";
// TRANSLATORS: Rough
"media-tooth.uncalendared" = "Rough";
// TRANSLATORS: Vellum
"media-tooth.vellum" = "Vellum";
// TRANSLATORS: Media Top Margin
"media-top-margin" = "Media Top Margin";
// TRANSLATORS: Media Type
"media-type" = "Media Type";
// TRANSLATORS: Aluminum
"media-type.aluminum" = "Aluminum";
// TRANSLATORS: Automatic
"media-type.auto" = "Automatic";
// TRANSLATORS: Back Print Film
"media-type.back-print-film" = "Back Print Film";
// TRANSLATORS: Cardboard
"media-type.cardboard" = "Cardboard";
// TRANSLATORS: Cardstock
"media-type.cardstock" = "Cardstock";
// TRANSLATORS: CD
"media-type.cd" = "CD";
// TRANSLATORS: Photo Advanced Paper
"media-type.com.hp.advanced-photo" = "Photo Advanced Paper";
// TRANSLATORS: Brochure Glossy Paper
"media-type.com.hp.brochure-glossy" = "Brochure Glossy Paper";
// TRANSLATORS: Brochure Matte Paper
"media-type.com.hp.brochure-matte" = "Brochure Matte Paper";
// TRANSLATORS: Matte Coverstock
"media-type.com.hp.cover-matte" = "Matte Coverstock";
// TRANSLATORS: EcoSMART Lite Paper
"media-type.com.hp.ecosmart-lite" = "EcoSMART Lite Paper";
// TRANSLATORS: Everyday Glossy Paper
"media-type.com.hp.everyday-glossy" = "Everyday Glossy Paper";
// TRANSLATORS: Everyday Matte Paper
"media-type.com.hp.everyday-matte" = "Everyday Matte Paper";
// TRANSLATORS: Extra Heavyweight Paper
"media-type.com.hp.extra-heavy" = "Extra Heavyweight Paper";
// TRANSLATORS: Intermediate Paper
"media-type.com.hp.intermediate" = "Intermediate Paper";
// TRANSLATORS: Mid-Weight Paper
"media-type.com.hp.mid-weight" = "Mid-Weight Paper";
// TRANSLATORS: Inkjet Premium Paper
"media-type.com.hp.premium-inkjet" = "Inkjet Premium Paper";
// TRANSLATORS: Photo Premium Paper
"media-type.com.hp.premium-photo" = "Photo Premium Paper";
// TRANSLATORS: Premium Matte Presentation Paper
"media-type.com.hp.premium-presentation-matte" = "Premium Matte Presentation Paper";
// TRANSLATORS: Continuous
"media-type.continuous" = "Continuous";
// TRANSLATORS: Continuous Long
"media-type.continuous-long" = "Continuous Long";
// TRANSLATORS: Continuous Short
"media-type.continuous-short" = "Continuous Short";
// TRANSLATORS: Corrugated Board
"media-type.corrugated-board" = "Corrugated Board";
// TRANSLATORS: Optical Disc
"media-type.disc" = "Optical Disc";
// TRANSLATORS: Glossy Optical Disc
"media-type.disc-glossy" = "Glossy Optical Disc";
// TRANSLATORS: High Gloss Optical Disc
"media-type.disc-high-gloss" = "High Gloss Optical Disc";
// TRANSLATORS: Matte Optical Disc
"media-type.disc-matte" = "Matte Optical Disc";
// TRANSLATORS: Satin Optical Disc
"media-type.disc-satin" = "Satin Optical Disc";
// TRANSLATORS: Semi-Gloss Optical Disc
"media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc";
// TRANSLATORS: Double Wall
"media-type.double-wall" = "Double Wall";
// TRANSLATORS: Dry Film
"media-type.dry-film" = "Dry Film";
// TRANSLATORS: DVD
"media-type.dvd" = "DVD";
// TRANSLATORS: Embossing Foil
"media-type.embossing-foil" = "Embossing Foil";
// TRANSLATORS: End Board
"media-type.end-board" = "End Board";
// TRANSLATORS: Envelope
"media-type.envelope" = "Envelope";
// TRANSLATORS: Archival Envelope
"media-type.envelope-archival" = "Archival Envelope";
// TRANSLATORS: Bond Envelope
"media-type.envelope-bond" = "Bond Envelope";
// TRANSLATORS: Coated Envelope
"media-type.envelope-coated" = "Coated Envelope";
// TRANSLATORS: Cotton Envelope
"media-type.envelope-cotton" = "Cotton Envelope";
// TRANSLATORS: Fine Envelope
"media-type.envelope-fine" = "Fine Envelope";
// TRANSLATORS: Heavyweight Envelope
"media-type.envelope-heavyweight" = "Heavyweight Envelope";
// TRANSLATORS: Inkjet Envelope
"media-type.envelope-inkjet" = "Inkjet Envelope";
// TRANSLATORS: Lightweight Envelope
"media-type.envelope-lightweight" = "Lightweight Envelope";
// TRANSLATORS: Plain Envelope
"media-type.envelope-plain" = "Plain Envelope";
// TRANSLATORS: Preprinted Envelope
"media-type.envelope-preprinted" = "Preprinted Envelope";
// TRANSLATORS: Windowed Envelope
"media-type.envelope-window" = "Windowed Envelope";
// TRANSLATORS: Fabric
"media-type.fabric" = "Fabric";
// TRANSLATORS: Archival Fabric
"media-type.fabric-archival" = "Archival Fabric";
// TRANSLATORS: Glossy Fabric
"media-type.fabric-glossy" = "Glossy Fabric";
// TRANSLATORS: High Gloss Fabric
"media-type.fabric-high-gloss" = "High Gloss Fabric";
// TRANSLATORS: Matte Fabric
"media-type.fabric-matte" = "Matte Fabric";
// TRANSLATORS: Semi-Gloss Fabric
"media-type.fabric-semi-gloss" = "Semi-Gloss Fabric";
// TRANSLATORS: Waterproof Fabric
"media-type.fabric-waterproof" = "Waterproof Fabric";
// TRANSLATORS: Film
"media-type.film" = "Film";
// TRANSLATORS: Flexo Base
"media-type.flexo-base" = "Flexo Base";
// TRANSLATORS: Flexo Photo Polymer
"media-type.flexo-photo-polymer" = "Flexo Photo Polymer";
// TRANSLATORS: Flute
"media-type.flute" = "Flute";
// TRANSLATORS: Foil
"media-type.foil" = "Foil";
// TRANSLATORS: Full Cut Tabs
"media-type.full-cut-tabs" = "Full Cut Tabs";
// TRANSLATORS: Glass
"media-type.glass" = "Glass";
// TRANSLATORS: Glass Colored
"media-type.glass-colored" = "Glass Colored";
// TRANSLATORS: Glass Opaque
"media-type.glass-opaque" = "Glass Opaque";
// TRANSLATORS: Glass Surfaced
"media-type.glass-surfaced" = "Glass Surfaced";
// TRANSLATORS: Glass Textured
"media-type.glass-textured" = "Glass Textured";
// TRANSLATORS: Gravure Cylinder
"media-type.gravure-cylinder" = "Gravure Cylinder";
// TRANSLATORS: Image Setter Paper
"media-type.image-setter-paper" = "Image Setter Paper";
// TRANSLATORS: Imaging Cylinder
"media-type.imaging-cylinder" = "Imaging Cylinder";
// TRANSLATORS: Photo Paper Plus Glossy II
"media-type.jp.co.canon-photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II";
// TRANSLATORS: Photo Paper Pro Platinum
"media-type.jp.co.canon-photo-paper-pro-platinum" = "Photo Paper Pro Platinum";
// TRANSLATORS: Photo Paper Plus Glossy II
"media-type.jp.co.canon_photo-paper-plus-glossy-ii" = "Photo Paper Plus Glossy II";
// TRANSLATORS: Photo Paper Pro Platinum
"media-type.jp.co.canon_photo-paper-pro-platinum" = "Photo Paper Pro Platinum";
// TRANSLATORS: Labels
"media-type.labels" = "Labels";
// TRANSLATORS: Colored Labels
"media-type.labels-colored" = "Colored Labels";
// TRANSLATORS: Glossy Labels
"media-type.labels-glossy" = "Glossy Labels";
// TRANSLATORS: High Gloss Labels
"media-type.labels-high-gloss" = "High Gloss Labels";
// TRANSLATORS: Inkjet Labels
"media-type.labels-inkjet" = "Inkjet Labels";
// TRANSLATORS: Matte Labels
"media-type.labels-matte" = "Matte Labels";
// TRANSLATORS: Permanent Labels
"media-type.labels-permanent" = "Permanent Labels";
// TRANSLATORS: Satin Labels
"media-type.labels-satin" = "Satin Labels";
// TRANSLATORS: Security Labels
"media-type.labels-security" = "Security Labels";
// TRANSLATORS: Semi-Gloss Labels
"media-type.labels-semi-gloss" = "Semi-Gloss Labels";
// TRANSLATORS: Laminating Foil
"media-type.laminating-foil" = "Laminating Foil";
// TRANSLATORS: Letterhead
"media-type.letterhead" = "Letterhead";
// TRANSLATORS: Metal
"media-type.metal" = "Metal";
// TRANSLATORS: Metal Glossy
"media-type.metal-glossy" = "Metal Glossy";
// TRANSLATORS: Metal High Gloss
"media-type.metal-high-gloss" = "Metal High Gloss";
// TRANSLATORS: Metal Matte
"media-type.metal-matte" = "Metal Matte";
// TRANSLATORS: Metal Satin
"media-type.metal-satin" = "Metal Satin";
// TRANSLATORS: Metal Semi Gloss
"media-type.metal-semi-gloss" = "Metal Semi Gloss";
// TRANSLATORS: Mounting Tape
"media-type.mounting-tape" = "Mounting Tape";
// TRANSLATORS: Multi Layer
"media-type.multi-layer" = "Multi Layer";
// TRANSLATORS: Multi Part Form
"media-type.multi-part-form" = "Multi Part Form";
// TRANSLATORS: Other
"media-type.other" = "Other";
// TRANSLATORS: Paper
"media-type.paper" = "Paper";
// TRANSLATORS: Photo Paper
"media-type.photographic" = "Photo Paper";
// TRANSLATORS: Photographic Archival
"media-type.photographic-archival" = "Photographic Archival";
// TRANSLATORS: Photo Film
"media-type.photographic-film" = "Photo Film";
// TRANSLATORS: Glossy Photo Paper
"media-type.photographic-glossy" = "Glossy Photo Paper";
// TRANSLATORS: High Gloss Photo Paper
"media-type.photographic-high-gloss" = "High Gloss Photo Paper";
// TRANSLATORS: Matte Photo Paper
"media-type.photographic-matte" = "Matte Photo Paper";
// TRANSLATORS: Satin Photo Paper
"media-type.photographic-satin" = "Satin Photo Paper";
// TRANSLATORS: Semi-Gloss Photo Paper
"media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper";
// TRANSLATORS: Plastic
"media-type.plastic" = "Plastic";
// TRANSLATORS: Plastic Archival
"media-type.plastic-archival" = "Plastic Archival";
// TRANSLATORS: Plastic Colored
"media-type.plastic-colored" = "Plastic Colored";
// TRANSLATORS: Plastic Glossy
"media-type.plastic-glossy" = "Plastic Glossy";
// TRANSLATORS: Plastic High Gloss
"media-type.plastic-high-gloss" = "Plastic High Gloss";
// TRANSLATORS: Plastic Matte
"media-type.plastic-matte" = "Plastic Matte";
// TRANSLATORS: Plastic Satin
"media-type.plastic-satin" = "Plastic Satin";
// TRANSLATORS: Plastic Semi Gloss
"media-type.plastic-semi-gloss" = "Plastic Semi Gloss";
// TRANSLATORS: Plate
"media-type.plate" = "Plate";
// TRANSLATORS: Polyester
"media-type.polyester" = "Polyester";
// TRANSLATORS: Pre Cut Tabs
"media-type.pre-cut-tabs" = "Pre Cut Tabs";
// TRANSLATORS: Roll
"media-type.roll" = "Roll";
// TRANSLATORS: Screen
"media-type.screen" = "Screen";
// TRANSLATORS: Screen Paged
"media-type.screen-paged" = "Screen Paged";
// TRANSLATORS: Self Adhesive
"media-type.self-adhesive" = "Self Adhesive";
// TRANSLATORS: Self Adhesive Film
"media-type.self-adhesive-film" = "Self Adhesive Film";
// TRANSLATORS: Shrink Foil
"media-type.shrink-foil" = "Shrink Foil";
// TRANSLATORS: Single Face
"media-type.single-face" = "Single Face";
// TRANSLATORS: Single Wall
"media-type.single-wall" = "Single Wall";
// TRANSLATORS: Sleeve
"media-type.sleeve" = "Sleeve";
// TRANSLATORS: Stationery
"media-type.stationery" = "Stationery";
// TRANSLATORS: Stationery Archival
"media-type.stationery-archival" = "Stationery Archival";
// TRANSLATORS: Coated Paper
"media-type.stationery-coated" = "Coated Paper";
// TRANSLATORS: Stationery Cotton
"media-type.stationery-cotton" = "Stationery Cotton";
// TRANSLATORS: Vellum Paper
"media-type.stationery-fine" = "Vellum Paper";
// TRANSLATORS: Heavyweight Paper
"media-type.stationery-heavyweight" = "Heavyweight Paper";
// TRANSLATORS: Stationery Heavyweight Coated
"media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated";
// TRANSLATORS: Stationery Inkjet Paper
"media-type.stationery-inkjet" = "Stationery Inkjet Paper";
// TRANSLATORS: Letterhead
"media-type.stationery-letterhead" = "Letterhead";
// TRANSLATORS: Lightweight Paper
"media-type.stationery-lightweight" = "Lightweight Paper";
// TRANSLATORS: Preprinted Paper
"media-type.stationery-preprinted" = "Preprinted Paper";
// TRANSLATORS: Punched Paper
"media-type.stationery-prepunched" = "Punched Paper";
// TRANSLATORS: Tab Stock
"media-type.tab-stock" = "Tab Stock";
// TRANSLATORS: Tractor
"media-type.tractor" = "Tractor";
// TRANSLATORS: Transfer
"media-type.transfer" = "Transfer";
// TRANSLATORS: Transparency
"media-type.transparency" = "Transparency";
// TRANSLATORS: Triple Wall
"media-type.triple-wall" = "Triple Wall";
// TRANSLATORS: Wet Film
"media-type.wet-film" = "Wet Film";
// TRANSLATORS: Media Weight (grams per m²)
"media-weight-metric" = "Media Weight (grams per m²)";
// TRANSLATORS: 28 x 40″
"media.asme_f_28x40in" = "28 x 40″";
// TRANSLATORS: A4 or US Letter
"media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter";
// TRANSLATORS: 2a0
"media.iso_2a0_1189x1682mm" = "2a0";
// TRANSLATORS: A0
"media.iso_a0_841x1189mm" = "A0";
// TRANSLATORS: A0x3
"media.iso_a0x3_1189x2523mm" = "A0x3";
// TRANSLATORS: A10
"media.iso_a10_26x37mm" = "A10";
// TRANSLATORS: A1
"media.iso_a1_594x841mm" = "A1";
// TRANSLATORS: A1x3
"media.iso_a1x3_841x1783mm" = "A1x3";
// TRANSLATORS: A1x4
"media.iso_a1x4_841x2378mm" = "A1x4";
// TRANSLATORS: A2
"media.iso_a2_420x594mm" = "A2";
// TRANSLATORS: A2x3
"media.iso_a2x3_594x1261mm" = "A2x3";
// TRANSLATORS: A2x4
"media.iso_a2x4_594x1682mm" = "A2x4";
// TRANSLATORS: A2x5
"media.iso_a2x5_594x2102mm" = "A2x5";
// TRANSLATORS: A3 (Extra)
"media.iso_a3-extra_322x445mm" = "A3 (Extra)";
// TRANSLATORS: A3
"media.iso_a3_297x420mm" = "A3";
// TRANSLATORS: A3x3
"media.iso_a3x3_420x891mm" = "A3x3";
// TRANSLATORS: A3x4
"media.iso_a3x4_420x1189mm" = "A3x4";
// TRANSLATORS: A3x5
"media.iso_a3x5_420x1486mm" = "A3x5";
// TRANSLATORS: A3x6
"media.iso_a3x6_420x1783mm" = "A3x6";
// TRANSLATORS: A3x7
"media.iso_a3x7_420x2080mm" = "A3x7";
// TRANSLATORS: A4 (Extra)
"media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)";
// TRANSLATORS: A4 (Tab)
"media.iso_a4-tab_225x297mm" = "A4 (Tab)";
// TRANSLATORS: A4
"media.iso_a4_210x297mm" = "A4";
// TRANSLATORS: A4x3
"media.iso_a4x3_297x630mm" = "A4x3";
// TRANSLATORS: A4x4
"media.iso_a4x4_297x841mm" = "A4x4";
// TRANSLATORS: A4x5
"media.iso_a4x5_297x1051mm" = "A4x5";
// TRANSLATORS: A4x6
"media.iso_a4x6_297x1261mm" = "A4x6";
// TRANSLATORS: A4x7
"media.iso_a4x7_297x1471mm" = "A4x7";
// TRANSLATORS: A4x8
"media.iso_a4x8_297x1682mm" = "A4x8";
// TRANSLATORS: A4x9
"media.iso_a4x9_297x1892mm" = "A4x9";
// TRANSLATORS: A5 (Extra)
"media.iso_a5-extra_174x235mm" = "A5 (Extra)";
// TRANSLATORS: A5
"media.iso_a5_148x210mm" = "A5";
// TRANSLATORS: A6
"media.iso_a6_105x148mm" = "A6";
// TRANSLATORS: A7
"media.iso_a7_74x105mm" = "A7";
// TRANSLATORS: A8
"media.iso_a8_52x74mm" = "A8";
// TRANSLATORS: A9
"media.iso_a9_37x52mm" = "A9";
// TRANSLATORS: B0
"media.iso_b0_1000x1414mm" = "B0";
// TRANSLATORS: B10
"media.iso_b10_31x44mm" = "B10";
// TRANSLATORS: B1
"media.iso_b1_707x1000mm" = "B1";
// TRANSLATORS: B2
"media.iso_b2_500x707mm" = "B2";
// TRANSLATORS: B3
"media.iso_b3_353x500mm" = "B3";
// TRANSLATORS: B4
"media.iso_b4_250x353mm" = "B4";
// TRANSLATORS: B5 (Extra)
"media.iso_b5-extra_201x276mm" = "B5 (Extra)";
// TRANSLATORS: Envelope B5
"media.iso_b5_176x250mm" = "Envelope B5";
// TRANSLATORS: B6
"media.iso_b6_125x176mm" = "B6";
// TRANSLATORS: Envelope B6/C4
"media.iso_b6c4_125x324mm" = "Envelope B6/C4";
// TRANSLATORS: B7
"media.iso_b7_88x125mm" = "B7";
// TRANSLATORS: B8
"media.iso_b8_62x88mm" = "B8";
// TRANSLATORS: B9
"media.iso_b9_44x62mm" = "B9";
// TRANSLATORS: CEnvelope 0
"media.iso_c0_917x1297mm" = "CEnvelope 0";
// TRANSLATORS: CEnvelope 10
"media.iso_c10_28x40mm" = "CEnvelope 10";
// TRANSLATORS: CEnvelope 1
"media.iso_c1_648x917mm" = "CEnvelope 1";
// TRANSLATORS: CEnvelope 2
"media.iso_c2_458x648mm" = "CEnvelope 2";
// TRANSLATORS: CEnvelope 3
"media.iso_c3_324x458mm" = "CEnvelope 3";
// TRANSLATORS: CEnvelope 4
"media.iso_c4_229x324mm" = "CEnvelope 4";
// TRANSLATORS: CEnvelope 5
"media.iso_c5_162x229mm" = "CEnvelope 5";
// TRANSLATORS: CEnvelope 6
"media.iso_c6_114x162mm" = "CEnvelope 6";
// TRANSLATORS: CEnvelope 6c5
"media.iso_c6c5_114x229mm" = "CEnvelope 6c5";
// TRANSLATORS: CEnvelope 7
"media.iso_c7_81x114mm" = "CEnvelope 7";
// TRANSLATORS: CEnvelope 7c6
"media.iso_c7c6_81x162mm" = "CEnvelope 7c6";
// TRANSLATORS: CEnvelope 8
"media.iso_c8_57x81mm" = "CEnvelope 8";
// TRANSLATORS: CEnvelope 9
"media.iso_c9_40x57mm" = "CEnvelope 9";
// TRANSLATORS: Envelope DL
"media.iso_dl_110x220mm" = "Envelope DL";
// TRANSLATORS: Id-1
"media.iso_id-1_53.98x85.6mm" = "Id-1";
// TRANSLATORS: Id-3
"media.iso_id-3_88x125mm" = "Id-3";
// TRANSLATORS: ISO RA0
"media.iso_ra0_860x1220mm" = "ISO RA0";
// TRANSLATORS: ISO RA1
"media.iso_ra1_610x860mm" = "ISO RA1";
// TRANSLATORS: ISO RA2
"media.iso_ra2_430x610mm" = "ISO RA2";
// TRANSLATORS: ISO RA3
"media.iso_ra3_305x430mm" = "ISO RA3";
// TRANSLATORS: ISO RA4
"media.iso_ra4_215x305mm" = "ISO RA4";
// TRANSLATORS: ISO SRA0
"media.iso_sra0_900x1280mm" = "ISO SRA0";
// TRANSLATORS: ISO SRA1
"media.iso_sra1_640x900mm" = "ISO SRA1";
// TRANSLATORS: ISO SRA2
"media.iso_sra2_450x640mm" = "ISO SRA2";
// TRANSLATORS: ISO SRA3
"media.iso_sra3_320x450mm" = "ISO SRA3";
// TRANSLATORS: ISO SRA4
"media.iso_sra4_225x320mm" = "ISO SRA4";
// TRANSLATORS: JIS B0
"media.jis_b0_1030x1456mm" = "JIS B0";
// TRANSLATORS: JIS B10
"media.jis_b10_32x45mm" = "JIS B10";
// TRANSLATORS: JIS B1
"media.jis_b1_728x1030mm" = "JIS B1";
// TRANSLATORS: JIS B2
"media.jis_b2_515x728mm" = "JIS B2";
// TRANSLATORS: JIS B3
"media.jis_b3_364x515mm" = "JIS B3";
// TRANSLATORS: JIS B4
"media.jis_b4_257x364mm" = "JIS B4";
// TRANSLATORS: JIS B5
"media.jis_b5_182x257mm" = "JIS B5";
// TRANSLATORS: JIS B6
"media.jis_b6_128x182mm" = "JIS B6";
// TRANSLATORS: JIS B7
"media.jis_b7_91x128mm" = "JIS B7";
// TRANSLATORS: JIS B8
"media.jis_b8_64x91mm" = "JIS B8";
// TRANSLATORS: JIS B9
"media.jis_b9_45x64mm" = "JIS B9";
// TRANSLATORS: JIS Executive
"media.jis_exec_216x330mm" = "JIS Executive";
// TRANSLATORS: Envelope Chou 2
"media.jpn_chou2_111.1x146mm" = "Envelope Chou 2";
// TRANSLATORS: Envelope Chou 3
"media.jpn_chou3_120x235mm" = "Envelope Chou 3";
// TRANSLATORS: Envelope Chou 40
"media.jpn_chou40_90x225mm" = "Envelope Chou 40";
// TRANSLATORS: Envelope Chou 4
"media.jpn_chou4_90x205mm" = "Envelope Chou 4";
// TRANSLATORS: Hagaki
"media.jpn_hagaki_100x148mm" = "Hagaki";
// TRANSLATORS: Envelope Kahu
"media.jpn_kahu_240x322.1mm" = "Envelope Kahu";
// TRANSLATORS: 270 x 382mm
"media.jpn_kaku1_270x382mm" = "270 x 382mm";
// TRANSLATORS: Envelope Kahu 2
"media.jpn_kaku2_240x332mm" = "Envelope Kahu 2";
// TRANSLATORS: 216 x 277mm
"media.jpn_kaku3_216x277mm" = "216 x 277mm";
// TRANSLATORS: 197 x 267mm
"media.jpn_kaku4_197x267mm" = "197 x 267mm";
// TRANSLATORS: 190 x 240mm
"media.jpn_kaku5_190x240mm" = "190 x 240mm";
// TRANSLATORS: 142 x 205mm
"media.jpn_kaku7_142x205mm" = "142 x 205mm";
// TRANSLATORS: 119 x 197mm
"media.jpn_kaku8_119x197mm" = "119 x 197mm";
// TRANSLATORS: Oufuku Reply Postcard
"media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard";
// TRANSLATORS: Envelope You 4
"media.jpn_you4_105x235mm" = "Envelope You 4";
// TRANSLATORS: 10 x 11″
"media.na_10x11_10x11in" = "10 x 11″";
// TRANSLATORS: 10 x 13″
"media.na_10x13_10x13in" = "10 x 13″";
// TRANSLATORS: 10 x 14″
"media.na_10x14_10x14in" = "10 x 14″";
// TRANSLATORS: 10 x 15″
"media.na_10x15_10x15in" = "10 x 15″";
// TRANSLATORS: 11 x 12″
"media.na_11x12_11x12in" = "11 x 12″";
// TRANSLATORS: 11 x 15″
"media.na_11x15_11x15in" = "11 x 15″";
// TRANSLATORS: 12 x 19″
"media.na_12x19_12x19in" = "12 x 19″";
// TRANSLATORS: 5 x 7″
"media.na_5x7_5x7in" = "5 x 7″";
// TRANSLATORS: 6 x 9″
"media.na_6x9_6x9in" = "6 x 9″";
// TRANSLATORS: 7 x 9″
"media.na_7x9_7x9in" = "7 x 9″";
// TRANSLATORS: 9 x 11″
"media.na_9x11_9x11in" = "9 x 11″";
// TRANSLATORS: Envelope A2
"media.na_a2_4.375x5.75in" = "Envelope A2";
// TRANSLATORS: 9 x 12″
"media.na_arch-a_9x12in" = "9 x 12″";
// TRANSLATORS: 12 x 18″
"media.na_arch-b_12x18in" = "12 x 18″";
// TRANSLATORS: 18 x 24″
"media.na_arch-c_18x24in" = "18 x 24″";
// TRANSLATORS: 24 x 36″
"media.na_arch-d_24x36in" = "24 x 36″";
// TRANSLATORS: 26 x 38″
"media.na_arch-e2_26x38in" = "26 x 38″";
// TRANSLATORS: 27 x 39″
"media.na_arch-e3_27x39in" = "27 x 39″";
// TRANSLATORS: 36 x 48″
"media.na_arch-e_36x48in" = "36 x 48″";
// TRANSLATORS: 12 x 19.17″
"media.na_b-plus_12x19.17in" = "12 x 19.17″";
// TRANSLATORS: Envelope C5
"media.na_c5_6.5x9.5in" = "Envelope C5";
// TRANSLATORS: 17 x 22″
"media.na_c_17x22in" = "17 x 22″";
// TRANSLATORS: 22 x 34″
"media.na_d_22x34in" = "22 x 34″";
// TRANSLATORS: 34 x 44″
"media.na_e_34x44in" = "34 x 44″";
// TRANSLATORS: 11 x 14″
"media.na_edp_11x14in" = "11 x 14″";
// TRANSLATORS: 12 x 14″
"media.na_eur-edp_12x14in" = "12 x 14″";
// TRANSLATORS: Executive
"media.na_executive_7.25x10.5in" = "Executive";
// TRANSLATORS: 44 x 68″
"media.na_f_44x68in" = "44 x 68″";
// TRANSLATORS: European Fanfold
"media.na_fanfold-eur_8.5x12in" = "European Fanfold";
// TRANSLATORS: US Fanfold
"media.na_fanfold-us_11x14.875in" = "US Fanfold";
// TRANSLATORS: Foolscap
"media.na_foolscap_8.5x13in" = "Foolscap";
// TRANSLATORS: 8 x 13″
"media.na_govt-legal_8x13in" = "8 x 13″";
// TRANSLATORS: 8 x 10″
"media.na_govt-letter_8x10in" = "8 x 10″";
// TRANSLATORS: 3 x 5″
"media.na_index-3x5_3x5in" = "3 x 5″";
// TRANSLATORS: 6 x 8″
"media.na_index-4x6-ext_6x8in" = "6 x 8″";
// TRANSLATORS: 4 x 6″
"media.na_index-4x6_4x6in" = "4 x 6″";
// TRANSLATORS: 5 x 8″
"media.na_index-5x8_5x8in" = "5 x 8″";
// TRANSLATORS: Statement
"media.na_invoice_5.5x8.5in" = "Statement";
// TRANSLATORS: 11 x 17″
"media.na_ledger_11x17in" = "11 x 17″";
// TRANSLATORS: US Legal (Extra)
"media.na_legal-extra_9.5x15in" = "US Legal (Extra)";
// TRANSLATORS: US Legal
"media.na_legal_8.5x14in" = "US Legal";
// TRANSLATORS: US Letter (Extra)
"media.na_letter-extra_9.5x12in" = "US Letter (Extra)";
// TRANSLATORS: US Letter (Plus)
"media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)";
// TRANSLATORS: US Letter
"media.na_letter_8.5x11in" = "US Letter";
// TRANSLATORS: Envelope Monarch
"media.na_monarch_3.875x7.5in" = "Envelope Monarch";
// TRANSLATORS: Envelope #10
"media.na_number-10_4.125x9.5in" = "Envelope #10";
// TRANSLATORS: Envelope #11
"media.na_number-11_4.5x10.375in" = "Envelope #11";
// TRANSLATORS: Envelope #12
"media.na_number-12_4.75x11in" = "Envelope #12";
// TRANSLATORS: Envelope #14
"media.na_number-14_5x11.5in" = "Envelope #14";
// TRANSLATORS: Envelope #9
"media.na_number-9_3.875x8.875in" = "Envelope #9";
// TRANSLATORS: 8.5 x 13.4″
"media.na_oficio_8.5x13.4in" = "8.5 x 13.4″";
// TRANSLATORS: Envelope Personal
"media.na_personal_3.625x6.5in" = "Envelope Personal";
// TRANSLATORS: Quarto
"media.na_quarto_8.5x10.83in" = "Quarto";
// TRANSLATORS: 8.94 x 14″
"media.na_super-a_8.94x14in" = "8.94 x 14″";
// TRANSLATORS: 13 x 19″
"media.na_super-b_13x19in" = "13 x 19″";
// TRANSLATORS: 30 x 42″
"media.na_wide-format_30x42in" = "30 x 42″";
// TRANSLATORS: 12 x 16″
"media.oe_12x16_12x16in" = "12 x 16″";
// TRANSLATORS: 14 x 17″
"media.oe_14x17_14x17in" = "14 x 17″";
// TRANSLATORS: 18 x 22″
"media.oe_18x22_18x22in" = "18 x 22″";
// TRANSLATORS: 17 x 24″
"media.oe_a2plus_17x24in" = "17 x 24″";
// TRANSLATORS: 2 x 3.5″
"media.oe_business-card_2x3.5in" = "2 x 3.5″";
// TRANSLATORS: 10 x 12″
"media.oe_photo-10r_10x12in" = "10 x 12″";
// TRANSLATORS: 20 x 24″
"media.oe_photo-20r_20x24in" = "20 x 24″";
// TRANSLATORS: 3.5 x 5″
"media.oe_photo-l_3.5x5in" = "3.5 x 5″";
// TRANSLATORS: 10 x 15″
"media.oe_photo-s10r_10x15in" = "10 x 15″";
// TRANSLATORS: 4 x 4″
"media.oe_square-photo_4x4in" = "4 x 4″";
// TRANSLATORS: 5 x 5″
"media.oe_square-photo_5x5in" = "5 x 5″";
// TRANSLATORS: 184 x 260mm
"media.om_16k_184x260mm" = "184 x 260mm";
// TRANSLATORS: 195 x 270mm
"media.om_16k_195x270mm" = "195 x 270mm";
// TRANSLATORS: 55 x 85mm
"media.om_business-card_55x85mm" = "55 x 85mm";
// TRANSLATORS: 55 x 91mm
"media.om_business-card_55x91mm" = "55 x 91mm";
// TRANSLATORS: 54 x 86mm
"media.om_card_54x86mm" = "54 x 86mm";
// TRANSLATORS: 275 x 395mm
"media.om_dai-pa-kai_275x395mm" = "275 x 395mm";
// TRANSLATORS: 89 x 119mm
"media.om_dsc-photo_89x119mm" = "89 x 119mm";
// TRANSLATORS: Folio
"media.om_folio-sp_215x315mm" = "Folio";
// TRANSLATORS: Folio (Special)
"media.om_folio_210x330mm" = "Folio (Special)";
// TRANSLATORS: Envelope Invitation
"media.om_invite_220x220mm" = "Envelope Invitation";
// TRANSLATORS: Envelope Italian
"media.om_italian_110x230mm" = "Envelope Italian";
// TRANSLATORS: 198 x 275mm
"media.om_juuro-ku-kai_198x275mm" = "198 x 275mm";
// TRANSLATORS: 200 x 300
"media.om_large-photo_200x300" = "200 x 300";
// TRANSLATORS: 130 x 180mm
"media.om_medium-photo_130x180mm" = "130 x 180mm";
// TRANSLATORS: 267 x 389mm
"media.om_pa-kai_267x389mm" = "267 x 389mm";
// TRANSLATORS: Envelope Postfix
"media.om_postfix_114x229mm" = "Envelope Postfix";
// TRANSLATORS: 100 x 150mm
"media.om_small-photo_100x150mm" = "100 x 150mm";
// TRANSLATORS: 89 x 89mm
"media.om_square-photo_89x89mm" = "89 x 89mm";
// TRANSLATORS: 100 x 200mm
"media.om_wide-photo_100x200mm" = "100 x 200mm";
// TRANSLATORS: Envelope Chinese #10
"media.prc_10_324x458mm" = "Envelope Chinese #10";
// TRANSLATORS: Chinese 16k
"media.prc_16k_146x215mm" = "Chinese 16k";
// TRANSLATORS: Envelope Chinese #1
"media.prc_1_102x165mm" = "Envelope Chinese #1";
// TRANSLATORS: Envelope Chinese #2
"media.prc_2_102x176mm" = "Envelope Chinese #2";
// TRANSLATORS: Chinese 32k
"media.prc_32k_97x151mm" = "Chinese 32k";
// TRANSLATORS: Envelope Chinese #3
"media.prc_3_125x176mm" = "Envelope Chinese #3";
// TRANSLATORS: Envelope Chinese #4
"media.prc_4_110x208mm" = "Envelope Chinese #4";
// TRANSLATORS: Envelope Chinese #5
"media.prc_5_110x220mm" = "Envelope Chinese #5";
// TRANSLATORS: Envelope Chinese #6
"media.prc_6_120x320mm" = "Envelope Chinese #6";
// TRANSLATORS: Envelope Chinese #7
"media.prc_7_160x230mm" = "Envelope Chinese #7";
// TRANSLATORS: Envelope Chinese #8
"media.prc_8_120x309mm" = "Envelope Chinese #8";
// TRANSLATORS: ROC 16k
"media.roc_16k_7.75x10.75in" = "ROC 16k";
// TRANSLATORS: ROC 8k
"media.roc_8k_10.75x15.5in" = "ROC 8k";
"members of class %s:" = "members of class %s:";
// TRANSLATORS: Multiple Document Handling
"multiple-document-handling" = "Multiple Document Handling";
// TRANSLATORS: Separate Documents Collated Copies
"multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies";
// TRANSLATORS: Separate Documents Uncollated Copies
"multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies";
// TRANSLATORS: Single Document
"multiple-document-handling.single-document" = "Single Document";
// TRANSLATORS: Single Document New Sheet
"multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet";
// TRANSLATORS: Multiple Object Handling
"multiple-object-handling" = "Multiple Object Handling";
// TRANSLATORS: Multiple Object Handling Actual
"multiple-object-handling-actual" = "Multiple Object Handling Actual";
// TRANSLATORS: Automatic
"multiple-object-handling.auto" = "Automatic";
// TRANSLATORS: Best Fit
"multiple-object-handling.best-fit" = "Best Fit";
// TRANSLATORS: Best Quality
"multiple-object-handling.best-quality" = "Best Quality";
// TRANSLATORS: Best Speed
"multiple-object-handling.best-speed" = "Best Speed";
// TRANSLATORS: One At A Time
"multiple-object-handling.one-at-a-time" = "One At A Time";
// TRANSLATORS: On Timeout
"multiple-operation-time-out-action" = "On Timeout";
// TRANSLATORS: Abort Job
"multiple-operation-time-out-action.abort-job" = "Abort Job";
// TRANSLATORS: Hold Job
"multiple-operation-time-out-action.hold-job" = "Hold Job";
// TRANSLATORS: Process Job
"multiple-operation-time-out-action.process-job" = "Process Job";
"no entries" = "no entries";
"no system default destination" = "no system default destination";
// TRANSLATORS: Noise Removal
"noise-removal" = "Noise Removal";
// TRANSLATORS: Notify Attributes
"notify-attributes" = "Notify Attributes";
// TRANSLATORS: Notify Charset
"notify-charset" = "Notify Charset";
// TRANSLATORS: Notify Events
"notify-events" = "Notify Events";
"notify-events not specified." = "notify-events not specified.";
// TRANSLATORS: Document Completed
"notify-events.document-completed" = "Document Completed";
// TRANSLATORS: Document Config Changed
"notify-events.document-config-changed" = "Document Config Changed";
// TRANSLATORS: Document Created
"notify-events.document-created" = "Document Created";
// TRANSLATORS: Document Fetchable
"notify-events.document-fetchable" = "Document Fetchable";
// TRANSLATORS: Document State Changed
"notify-events.document-state-changed" = "Document State Changed";
// TRANSLATORS: Document Stopped
"notify-events.document-stopped" = "Document Stopped";
// TRANSLATORS: Job Completed
"notify-events.job-completed" = "Job Completed";
// TRANSLATORS: Job Config Changed
"notify-events.job-config-changed" = "Job Config Changed";
// TRANSLATORS: Job Created
"notify-events.job-created" = "Job Created";
// TRANSLATORS: Job Fetchable
"notify-events.job-fetchable" = "Job Fetchable";
// TRANSLATORS: Job Progress
"notify-events.job-progress" = "Job Progress";
// TRANSLATORS: Job State Changed
"notify-events.job-state-changed" = "Job State Changed";
// TRANSLATORS: Job Stopped
"notify-events.job-stopped" = "Job Stopped";
// TRANSLATORS: None
"notify-events.none" = "None";
// TRANSLATORS: Printer Config Changed
"notify-events.printer-config-changed" = "Printer Config Changed";
// TRANSLATORS: Printer Finishings Changed
"notify-events.printer-finishings-changed" = "Printer Finishings Changed";
// TRANSLATORS: Printer Media Changed
"notify-events.printer-media-changed" = "Printer Media Changed";
// TRANSLATORS: Printer Queue Order Changed
"notify-events.printer-queue-order-changed" = "Printer Queue Order Changed";
// TRANSLATORS: Printer Restarted
"notify-events.printer-restarted" = "Printer Restarted";
// TRANSLATORS: Printer Shutdown
"notify-events.printer-shutdown" = "Printer Shutdown";
// TRANSLATORS: Printer State Changed
"notify-events.printer-state-changed" = "Printer State Changed";
// TRANSLATORS: Printer Stopped
"notify-events.printer-stopped" = "Printer Stopped";
// TRANSLATORS: Notify Get Interval
"notify-get-interval" = "Notify Get Interval";
// TRANSLATORS: Notify Lease Duration
"notify-lease-duration" = "Notify Lease Duration";
// TRANSLATORS: Notify Natural Language
"notify-natural-language" = "Notify Natural Language";
// TRANSLATORS: Notify Pull Method
"notify-pull-method" = "Notify Pull Method";
// TRANSLATORS: Notify Recipient
"notify-recipient-uri" = "Notify Recipient";
"notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used.";
"notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI \"%s\" uses unknown scheme.";
// TRANSLATORS: Notify Sequence Numbers
"notify-sequence-numbers" = "Notify Sequence Numbers";
// TRANSLATORS: Notify Subscription Ids
"notify-subscription-ids" = "Notify Subscription Ids";
// TRANSLATORS: Notify Time Interval
"notify-time-interval" = "Notify Time Interval";
// TRANSLATORS: Notify User Data
"notify-user-data" = "Notify User Data";
// TRANSLATORS: Notify Wait
"notify-wait" = "Notify Wait";
// TRANSLATORS: Number Of Retries
"number-of-retries" = "Number Of Retries";
// TRANSLATORS: Number-Up
"number-up" = "Number-Up";
// TRANSLATORS: Object Offset
"object-offset" = "Object Offset";
// TRANSLATORS: Object Size
"object-size" = "Object Size";
// TRANSLATORS: Organization Name
"organization-name" = "Organization Name";
// TRANSLATORS: Orientation
"orientation-requested" = "Orientation";
// TRANSLATORS: Portrait
"orientation-requested.3" = "Portrait";
// TRANSLATORS: Landscape
"orientation-requested.4" = "Landscape";
// TRANSLATORS: Reverse Landscape
"orientation-requested.5" = "Reverse Landscape";
// TRANSLATORS: Reverse Portrait
"orientation-requested.6" = "Reverse Portrait";
// TRANSLATORS: None
"orientation-requested.7" = "None";
// TRANSLATORS: Scanned Image Options
"output-attributes" = "Scanned Image Options";
// TRANSLATORS: Output Tray
"output-bin" = "Output Tray";
// TRANSLATORS: Automatic
"output-bin.auto" = "Automatic";
// TRANSLATORS: Bottom
"output-bin.bottom" = "Bottom";
// TRANSLATORS: Center
"output-bin.center" = "Center";
// TRANSLATORS: Face Down
"output-bin.face-down" = "Face Down";
// TRANSLATORS: Face Up
"output-bin.face-up" = "Face Up";
// TRANSLATORS: Large Capacity
"output-bin.large-capacity" = "Large Capacity";
// TRANSLATORS: Left
"output-bin.left" = "Left";
// TRANSLATORS: Mailbox 1
"output-bin.mailbox-1" = "Mailbox 1";
// TRANSLATORS: Mailbox 10
"output-bin.mailbox-10" = "Mailbox 10";
// TRANSLATORS: Mailbox 2
"output-bin.mailbox-2" = "Mailbox 2";
// TRANSLATORS: Mailbox 3
"output-bin.mailbox-3" = "Mailbox 3";
// TRANSLATORS: Mailbox 4
"output-bin.mailbox-4" = "Mailbox 4";
// TRANSLATORS: Mailbox 5
"output-bin.mailbox-5" = "Mailbox 5";
// TRANSLATORS: Mailbox 6
"output-bin.mailbox-6" = "Mailbox 6";
// TRANSLATORS: Mailbox 7
"output-bin.mailbox-7" = "Mailbox 7";
// TRANSLATORS: Mailbox 8
"output-bin.mailbox-8" = "Mailbox 8";
// TRANSLATORS: Mailbox 9
"output-bin.mailbox-9" = "Mailbox 9";
// TRANSLATORS: Middle
"output-bin.middle" = "Middle";
// TRANSLATORS: My Mailbox
"output-bin.my-mailbox" = "My Mailbox";
// TRANSLATORS: Rear
"output-bin.rear" = "Rear";
// TRANSLATORS: Right
"output-bin.right" = "Right";
// TRANSLATORS: Side
"output-bin.side" = "Side";
// TRANSLATORS: Stacker 1
"output-bin.stacker-1" = "Stacker 1";
// TRANSLATORS: Stacker 10
"output-bin.stacker-10" = "Stacker 10";
// TRANSLATORS: Stacker 2
"output-bin.stacker-2" = "Stacker 2";
// TRANSLATORS: Stacker 3
"output-bin.stacker-3" = "Stacker 3";
// TRANSLATORS: Stacker 4
"output-bin.stacker-4" = "Stacker 4";
// TRANSLATORS: Stacker 5
"output-bin.stacker-5" = "Stacker 5";
// TRANSLATORS: Stacker 6
"output-bin.stacker-6" = "Stacker 6";
// TRANSLATORS: Stacker 7
"output-bin.stacker-7" = "Stacker 7";
// TRANSLATORS: Stacker 8
"output-bin.stacker-8" = "Stacker 8";
// TRANSLATORS: Stacker 9
"output-bin.stacker-9" = "Stacker 9";
// TRANSLATORS: Top
"output-bin.top" = "Top";
// TRANSLATORS: Tray 1
"output-bin.tray-1" = "Tray 1";
// TRANSLATORS: Tray 10
"output-bin.tray-10" = "Tray 10";
// TRANSLATORS: Tray 2
"output-bin.tray-2" = "Tray 2";
// TRANSLATORS: Tray 3
"output-bin.tray-3" = "Tray 3";
// TRANSLATORS: Tray 4
"output-bin.tray-4" = "Tray 4";
// TRANSLATORS: Tray 5
"output-bin.tray-5" = "Tray 5";
// TRANSLATORS: Tray 6
"output-bin.tray-6" = "Tray 6";
// TRANSLATORS: Tray 7
"output-bin.tray-7" = "Tray 7";
// TRANSLATORS: Tray 8
"output-bin.tray-8" = "Tray 8";
// TRANSLATORS: Tray 9
"output-bin.tray-9" = "Tray 9";
// TRANSLATORS: Scanned Image Quality
"output-compression-quality-factor" = "Scanned Image Quality";
// TRANSLATORS: Page Delivery
"page-delivery" = "Page Delivery";
// TRANSLATORS: Reverse Order Face-down
"page-delivery.reverse-order-face-down" = "Reverse Order Face-down";
// TRANSLATORS: Reverse Order Face-up
"page-delivery.reverse-order-face-up" = "Reverse Order Face-up";
// TRANSLATORS: Same Order Face-down
"page-delivery.same-order-face-down" = "Same Order Face-down";
// TRANSLATORS: Same Order Face-up
"page-delivery.same-order-face-up" = "Same Order Face-up";
// TRANSLATORS: System Specified
"page-delivery.system-specified" = "System Specified";
// TRANSLATORS: Page Order Received
"page-order-received" = "Page Order Received";
// TRANSLATORS: 1 To N
"page-order-received.1-to-n-order" = "1 To N";
// TRANSLATORS: N To 1
"page-order-received.n-to-1-order" = "N To 1";
// TRANSLATORS: Page Ranges
"page-ranges" = "Page Ranges";
// TRANSLATORS: Pages
"pages" = "Pages";
// TRANSLATORS: Pages Per Subset
"pages-per-subset" = "Pages Per Subset";
// TRANSLATORS: Pclm Raster Back Side
"pclm-raster-back-side" = "Pclm Raster Back Side";
// TRANSLATORS: Flipped
"pclm-raster-back-side.flipped" = "Flipped";
// TRANSLATORS: Normal
"pclm-raster-back-side.normal" = "Normal";
// TRANSLATORS: Rotated
"pclm-raster-back-side.rotated" = "Rotated";
// TRANSLATORS: Pclm Source Resolution
"pclm-source-resolution" = "Pclm Source Resolution";
"pending" = "pending";
// TRANSLATORS: Platform Shape
"platform-shape" = "Platform Shape";
// TRANSLATORS: Round
"platform-shape.ellipse" = "Round";
// TRANSLATORS: Rectangle
"platform-shape.rectangle" = "Rectangle";
// TRANSLATORS: Platform Temperature
"platform-temperature" = "Platform Temperature";
// TRANSLATORS: Post-dial String
"post-dial-string" = "Post-dial String";
"ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”.";
"ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s.";
"ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s.";
"ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s";
"ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s.";
"ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s.";
"ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s.";
"ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option.";
"ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s.";
"ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s.";
"ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s.";
"ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s.";
"ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s.";
"ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s.";
"ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s.";
"ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s.";
"ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s.";
"ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s.";
"ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s.";
"ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s.";
"ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s.";
"ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s.";
"ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s.";
"ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s.";
"ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s.";
"ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s.";
"ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s.";
"ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s.";
"ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s.";
"ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s.";
"ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s.";
"ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s.";
"ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s.";
"ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s.";
"ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s.";
"ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s.";
"ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s.";
"ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s.";
"ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s.";
"ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s.";
"ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s.";
"ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s.";
"ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s.";
"ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s.";
"ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s.";
"ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s.";
"ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s.";
"ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s.";
"ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s.";
"ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s.";
"ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s.";
"ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s.";
"ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s.";
"ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”.";
"ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s.";
"ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s.";
"ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s.";
"ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s.";
"ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s.";
"ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”.";
"ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”.";
"ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”.";
"ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”.";
"ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s.";
"ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s.";
"ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s.";
"ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s.";
"ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s.";
"ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s.";
"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s.";
"ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s.";
"ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s";
"ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s";
"ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s";
"ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s.";
"ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s.";
"ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s";
"ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s";
"ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s";
"ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s.";
"ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s.";
"ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s.";
"ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s.";
"ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s.";
"ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”.";
"ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s.";
"ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s.";
"ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s.";
"ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”.";
"ppdc: Writing %s." = "ppdc: Writing %s.";
"ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”.";
"ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s.";
"ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s.";
"ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s";
// TRANSLATORS: Pre-dial String
"pre-dial-string" = "Pre-dial String";
// TRANSLATORS: Number-Up Layout
"presentation-direction-number-up" = "Number-Up Layout";
// TRANSLATORS: Top-bottom, Right-left
"presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left";
// TRANSLATORS: Top-bottom, Left-right
"presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right";
// TRANSLATORS: Right-left, Top-bottom
"presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom";
// TRANSLATORS: Right-left, Bottom-top
"presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top";
// TRANSLATORS: Left-right, Top-bottom
"presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom";
// TRANSLATORS: Left-right, Bottom-top
"presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top";
// TRANSLATORS: Bottom-top, Right-left
"presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left";
// TRANSLATORS: Bottom-top, Left-right
"presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right";
// TRANSLATORS: Print Accuracy
"print-accuracy" = "Print Accuracy";
// TRANSLATORS: Print Base
"print-base" = "Print Base";
// TRANSLATORS: Print Base Actual
"print-base-actual" = "Print Base Actual";
// TRANSLATORS: Brim
"print-base.brim" = "Brim";
// TRANSLATORS: None
"print-base.none" = "None";
// TRANSLATORS: Raft
"print-base.raft" = "Raft";
// TRANSLATORS: Skirt
"print-base.skirt" = "Skirt";
// TRANSLATORS: Standard
"print-base.standard" = "Standard";
// TRANSLATORS: Print Color Mode
"print-color-mode" = "Print Color Mode";
// TRANSLATORS: Automatic
"print-color-mode.auto" = "Automatic";
// TRANSLATORS: Auto Monochrome
"print-color-mode.auto-monochrome" = "Auto Monochrome";
// TRANSLATORS: Text
"print-color-mode.bi-level" = "Text";
// TRANSLATORS: Color
"print-color-mode.color" = "Color";
// TRANSLATORS: Highlight
"print-color-mode.highlight" = "Highlight";
// TRANSLATORS: Monochrome
"print-color-mode.monochrome" = "Monochrome";
// TRANSLATORS: Process Text
"print-color-mode.process-bi-level" = "Process Text";
// TRANSLATORS: Process Monochrome
"print-color-mode.process-monochrome" = "Process Monochrome";
// TRANSLATORS: Print Optimization
"print-content-optimize" = "Print Optimization";
// TRANSLATORS: Print Content Optimize Actual
"print-content-optimize-actual" = "Print Optimization";
// TRANSLATORS: Automatic
"print-content-optimize.auto" = "Automatic";
// TRANSLATORS: Graphics
"print-content-optimize.graphic" = "Graphics";
// TRANSLATORS: Graphics
"print-content-optimize.graphics" = "Graphics";
// TRANSLATORS: Photo
"print-content-optimize.photo" = "Photo";
// TRANSLATORS: Text
"print-content-optimize.text" = "Text";
// TRANSLATORS: Text and Graphics
"print-content-optimize.text-and-graphic" = "Text and Graphics";
// TRANSLATORS: Text And Graphics
"print-content-optimize.text-and-graphics" = "Text and Graphics";
// TRANSLATORS: Print Objects
"print-objects" = "Print Objects";
// TRANSLATORS: Print Quality
"print-quality" = "Print Quality";
// TRANSLATORS: Draft
"print-quality.3" = "Draft";
// TRANSLATORS: Normal
"print-quality.4" = "Normal";
// TRANSLATORS: High
"print-quality.5" = "High";
// TRANSLATORS: Print Rendering Intent
"print-rendering-intent" = "Print Rendering Intent";
// TRANSLATORS: Absolute
"print-rendering-intent.absolute" = "Absolute";
// TRANSLATORS: Automatic
"print-rendering-intent.auto" = "Automatic";
// TRANSLATORS: Perceptual
"print-rendering-intent.perceptual" = "Perceptual";
// TRANSLATORS: Relative
"print-rendering-intent.relative" = "Relative";
// TRANSLATORS: Relative w/Black Point Compensation
"print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation";
// TRANSLATORS: Saturation
"print-rendering-intent.saturation" = "Saturation";
// TRANSLATORS: Print Scaling
"print-scaling" = "Print Scaling";
// TRANSLATORS: Automatic
"print-scaling.auto" = "Automatic";
// TRANSLATORS: Auto-fit
"print-scaling.auto-fit" = "Auto-fit";
// TRANSLATORS: Fill
"print-scaling.fill" = "Fill";
// TRANSLATORS: Fit
"print-scaling.fit" = "Fit";
// TRANSLATORS: None
"print-scaling.none" = "None";
// TRANSLATORS: Print Supports
"print-supports" = "Print Supports";
// TRANSLATORS: Print Supports Actual
"print-supports-actual" = "Print Supports Actual";
// TRANSLATORS: With Specified Material
"print-supports.material" = "With Specified Material";
// TRANSLATORS: None
"print-supports.none" = "None";
// TRANSLATORS: Standard
"print-supports.standard" = "Standard";
"printer %s disabled since %s -" = "printer %s disabled since %s -";
"printer %s is holding new jobs. enabled since %s" = "printer %s is holding new jobs. enabled since %s";
"printer %s is idle. enabled since %s" = "printer %s is idle. enabled since %s";
"printer %s now printing %s-%d. enabled since %s" = "printer %s now printing %s-%d. enabled since %s";
"printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -";
"printer %s/%s is idle. enabled since %s" = "printer %s/%s is idle. enabled since %s";
"printer %s/%s now printing %s-%d. enabled since %s" = "printer %s/%s now printing %s-%d. enabled since %s";
// TRANSLATORS: Printer Kind
"printer-kind" = "Printer Kind";
// TRANSLATORS: Disc
"printer-kind.disc" = "Disc";
// TRANSLATORS: Document
"printer-kind.document" = "Document";
// TRANSLATORS: Envelope
"printer-kind.envelope" = "Envelope";
// TRANSLATORS: Label
"printer-kind.label" = "Label";
// TRANSLATORS: Large Format
"printer-kind.large-format" = "Large format";
// TRANSLATORS: Photo
"printer-kind.photo" = "Photo";
// TRANSLATORS: Postcard
"printer-kind.postcard" = "Postcard";
// TRANSLATORS: Receipt
"printer-kind.receipt" = "Receipt";
// TRANSLATORS: Roll
"printer-kind.roll" = "Roll";
// TRANSLATORS: Message From Operator
"printer-message-from-operator" = "Message From Operator";
// TRANSLATORS: Print Resolution
"printer-resolution" = "Print Resolution";
// TRANSLATORS: Printer State
"printer-state" = "Printer State";
// TRANSLATORS: Detailed Printer State
"printer-state-reasons" = "Detailed Printer State";
// TRANSLATORS: Old Alerts Have Been Removed
"printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed";
// TRANSLATORS: Bander Added
"printer-state-reasons.bander-added" = "Bander Added";
// TRANSLATORS: Bander Almost Empty
"printer-state-reasons.bander-almost-empty" = "Bander Almost Empty";
// TRANSLATORS: Bander Almost Full
"printer-state-reasons.bander-almost-full" = "Bander Almost Full";
// TRANSLATORS: Bander At Limit
"printer-state-reasons.bander-at-limit" = "Bander At Limit";
// TRANSLATORS: Bander Closed
"printer-state-reasons.bander-closed" = "Bander Closed";
// TRANSLATORS: Bander Configuration Change
"printer-state-reasons.bander-configuration-change" = "Bander Configuration Change";
// TRANSLATORS: Bander Cover Closed
"printer-state-reasons.bander-cover-closed" = "Bander Cover Closed";
// TRANSLATORS: Bander Cover Open
"printer-state-reasons.bander-cover-open" = "Bander Cover Open";
// TRANSLATORS: Bander Empty
"printer-state-reasons.bander-empty" = "Bander Empty";
// TRANSLATORS: Bander Full
"printer-state-reasons.bander-full" = "Bander Full";
// TRANSLATORS: Bander Interlock Closed
"printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed";
// TRANSLATORS: Bander Interlock Open
"printer-state-reasons.bander-interlock-open" = "Bander Interlock Open";
// TRANSLATORS: Bander Jam
"printer-state-reasons.bander-jam" = "Bander Jam";
// TRANSLATORS: Bander Life Almost Over
"printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over";
// TRANSLATORS: Bander Life Over
"printer-state-reasons.bander-life-over" = "Bander Life Over";
// TRANSLATORS: Bander Memory Exhausted
"printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted";
// TRANSLATORS: Bander Missing
"printer-state-reasons.bander-missing" = "Bander Missing";
// TRANSLATORS: Bander Motor Failure
"printer-state-reasons.bander-motor-failure" = "Bander Motor Failure";
// TRANSLATORS: Bander Near Limit
"printer-state-reasons.bander-near-limit" = "Bander Near Limit";
// TRANSLATORS: Bander Offline
"printer-state-reasons.bander-offline" = "Bander Offline";
// TRANSLATORS: Bander Opened
"printer-state-reasons.bander-opened" = "Bander Opened";
// TRANSLATORS: Bander Over Temperature
"printer-state-reasons.bander-over-temperature" = "Bander Over Temperature";
// TRANSLATORS: Bander Power Saver
"printer-state-reasons.bander-power-saver" = "Bander Power Saver";
// TRANSLATORS: Bander Recoverable Failure
"printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure";
// TRANSLATORS: Bander Recoverable Storage
"printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage";
// TRANSLATORS: Bander Removed
"printer-state-reasons.bander-removed" = "Bander Removed";
// TRANSLATORS: Bander Resource Added
"printer-state-reasons.bander-resource-added" = "Bander Resource Added";
// TRANSLATORS: Bander Resource Removed
"printer-state-reasons.bander-resource-removed" = "Bander Resource Removed";
// TRANSLATORS: Bander Thermistor Failure
"printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure";
// TRANSLATORS: Bander Timing Failure
"printer-state-reasons.bander-timing-failure" = "Bander Timing Failure";
// TRANSLATORS: Bander Turned Off
"printer-state-reasons.bander-turned-off" = "Bander Turned Off";
// TRANSLATORS: Bander Turned On
"printer-state-reasons.bander-turned-on" = "Bander Turned On";
// TRANSLATORS: Bander Under Temperature
"printer-state-reasons.bander-under-temperature" = "Bander Under Temperature";
// TRANSLATORS: Bander Unrecoverable Failure
"printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure";
// TRANSLATORS: Bander Unrecoverable Storage Error
"printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error";
// TRANSLATORS: Bander Warming Up
"printer-state-reasons.bander-warming-up" = "Bander Warming Up";
// TRANSLATORS: Binder Added
"printer-state-reasons.binder-added" = "Binder Added";
// TRANSLATORS: Binder Almost Empty
"printer-state-reasons.binder-almost-empty" = "Binder Almost Empty";
// TRANSLATORS: Binder Almost Full
"printer-state-reasons.binder-almost-full" = "Binder Almost Full";
// TRANSLATORS: Binder At Limit
"printer-state-reasons.binder-at-limit" = "Binder At Limit";
// TRANSLATORS: Binder Closed
"printer-state-reasons.binder-closed" = "Binder Closed";
// TRANSLATORS: Binder Configuration Change
"printer-state-reasons.binder-configuration-change" = "Binder Configuration Change";
// TRANSLATORS: Binder Cover Closed
"printer-state-reasons.binder-cover-closed" = "Binder Cover Closed";
// TRANSLATORS: Binder Cover Open
"printer-state-reasons.binder-cover-open" = "Binder Cover Open";
// TRANSLATORS: Binder Empty
"printer-state-reasons.binder-empty" = "Binder Empty";
// TRANSLATORS: Binder Full
"printer-state-reasons.binder-full" = "Binder Full";
// TRANSLATORS: Binder Interlock Closed
"printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed";
// TRANSLATORS: Binder Interlock Open
"printer-state-reasons.binder-interlock-open" = "Binder Interlock Open";
// TRANSLATORS: Binder Jam
"printer-state-reasons.binder-jam" = "Binder Jam";
// TRANSLATORS: Binder Life Almost Over
"printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over";
// TRANSLATORS: Binder Life Over
"printer-state-reasons.binder-life-over" = "Binder Life Over";
// TRANSLATORS: Binder Memory Exhausted
"printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted";
// TRANSLATORS: Binder Missing
"printer-state-reasons.binder-missing" = "Binder Missing";
// TRANSLATORS: Binder Motor Failure
"printer-state-reasons.binder-motor-failure" = "Binder Motor Failure";
// TRANSLATORS: Binder Near Limit
"printer-state-reasons.binder-near-limit" = "Binder Near Limit";
// TRANSLATORS: Binder Offline
"printer-state-reasons.binder-offline" = "Binder Offline";
// TRANSLATORS: Binder Opened
"printer-state-reasons.binder-opened" = "Binder Opened";
// TRANSLATORS: Binder Over Temperature
"printer-state-reasons.binder-over-temperature" = "Binder Over Temperature";
// TRANSLATORS: Binder Power Saver
"printer-state-reasons.binder-power-saver" = "Binder Power Saver";
// TRANSLATORS: Binder Recoverable Failure
"printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure";
// TRANSLATORS: Binder Recoverable Storage
"printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage";
// TRANSLATORS: Binder Removed
"printer-state-reasons.binder-removed" = "Binder Removed";
// TRANSLATORS: Binder Resource Added
"printer-state-reasons.binder-resource-added" = "Binder Resource Added";
// TRANSLATORS: Binder Resource Removed
"printer-state-reasons.binder-resource-removed" = "Binder Resource Removed";
// TRANSLATORS: Binder Thermistor Failure
"printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure";
// TRANSLATORS: Binder Timing Failure
"printer-state-reasons.binder-timing-failure" = "Binder Timing Failure";
// TRANSLATORS: Binder Turned Off
"printer-state-reasons.binder-turned-off" = "Binder Turned Off";
// TRANSLATORS: Binder Turned On
"printer-state-reasons.binder-turned-on" = "Binder Turned On";
// TRANSLATORS: Binder Under Temperature
"printer-state-reasons.binder-under-temperature" = "Binder Under Temperature";
// TRANSLATORS: Binder Unrecoverable Failure
"printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure";
// TRANSLATORS: Binder Unrecoverable Storage Error
"printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error";
// TRANSLATORS: Binder Warming Up
"printer-state-reasons.binder-warming-up" = "Binder Warming Up";
// TRANSLATORS: Camera Failure
"printer-state-reasons.camera-failure" = "Camera Failure";
// TRANSLATORS: Chamber Cooling
"printer-state-reasons.chamber-cooling" = "Chamber Cooling";
// TRANSLATORS: Chamber Failure
"printer-state-reasons.chamber-failure" = "Chamber Failure";
// TRANSLATORS: Chamber Heating
"printer-state-reasons.chamber-heating" = "Chamber Heating";
// TRANSLATORS: Chamber Temperature High
"printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High";
// TRANSLATORS: Chamber Temperature Low
"printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low";
// TRANSLATORS: Cleaner Life Almost Over
"printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over";
// TRANSLATORS: Cleaner Life Over
"printer-state-reasons.cleaner-life-over" = "Cleaner Life Over";
// TRANSLATORS: Configuration Change
"printer-state-reasons.configuration-change" = "Configuration Change";
// TRANSLATORS: Connecting To Device
"printer-state-reasons.connecting-to-device" = "Connecting To Device";
// TRANSLATORS: Cover Open
"printer-state-reasons.cover-open" = "Cover Open";
// TRANSLATORS: Deactivated
"printer-state-reasons.deactivated" = "Deactivated";
// TRANSLATORS: Developer Empty
"printer-state-reasons.developer-empty" = "Developer Empty";
// TRANSLATORS: Developer Low
"printer-state-reasons.developer-low" = "Developer Low";
// TRANSLATORS: Die Cutter Added
"printer-state-reasons.die-cutter-added" = "Die Cutter Added";
// TRANSLATORS: Die Cutter Almost Empty
"printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty";
// TRANSLATORS: Die Cutter Almost Full
"printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full";
// TRANSLATORS: Die Cutter At Limit
"printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit";
// TRANSLATORS: Die Cutter Closed
"printer-state-reasons.die-cutter-closed" = "Die Cutter Closed";
// TRANSLATORS: Die Cutter Configuration Change
"printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change";
// TRANSLATORS: Die Cutter Cover Closed
"printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed";
// TRANSLATORS: Die Cutter Cover Open
"printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open";
// TRANSLATORS: Die Cutter Empty
"printer-state-reasons.die-cutter-empty" = "Die Cutter Empty";
// TRANSLATORS: Die Cutter Full
"printer-state-reasons.die-cutter-full" = "Die Cutter Full";
// TRANSLATORS: Die Cutter Interlock Closed
"printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed";
// TRANSLATORS: Die Cutter Interlock Open
"printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open";
// TRANSLATORS: Die Cutter Jam
"printer-state-reasons.die-cutter-jam" = "Die Cutter Jam";
// TRANSLATORS: Die Cutter Life Almost Over
"printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over";
// TRANSLATORS: Die Cutter Life Over
"printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over";
// TRANSLATORS: Die Cutter Memory Exhausted
"printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted";
// TRANSLATORS: Die Cutter Missing
"printer-state-reasons.die-cutter-missing" = "Die Cutter Missing";
// TRANSLATORS: Die Cutter Motor Failure
"printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure";
// TRANSLATORS: Die Cutter Near Limit
"printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit";
// TRANSLATORS: Die Cutter Offline
"printer-state-reasons.die-cutter-offline" = "Die Cutter Offline";
// TRANSLATORS: Die Cutter Opened
"printer-state-reasons.die-cutter-opened" = "Die Cutter Opened";
// TRANSLATORS: Die Cutter Over Temperature
"printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature";
// TRANSLATORS: Die Cutter Power Saver
"printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver";
// TRANSLATORS: Die Cutter Recoverable Failure
"printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure";
// TRANSLATORS: Die Cutter Recoverable Storage
"printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage";
// TRANSLATORS: Die Cutter Removed
"printer-state-reasons.die-cutter-removed" = "Die Cutter Removed";
// TRANSLATORS: Die Cutter Resource Added
"printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added";
// TRANSLATORS: Die Cutter Resource Removed
"printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed";
// TRANSLATORS: Die Cutter Thermistor Failure
"printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure";
// TRANSLATORS: Die Cutter Timing Failure
"printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure";
// TRANSLATORS: Die Cutter Turned Off
"printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off";
// TRANSLATORS: Die Cutter Turned On
"printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On";
// TRANSLATORS: Die Cutter Under Temperature
"printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature";
// TRANSLATORS: Die Cutter Unrecoverable Failure
"printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure";
// TRANSLATORS: Die Cutter Unrecoverable Storage Error
"printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error";
// TRANSLATORS: Die Cutter Warming Up
"printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up";
// TRANSLATORS: Door Open
"printer-state-reasons.door-open" = "Door Open";
// TRANSLATORS: Extruder Cooling
"printer-state-reasons.extruder-cooling" = "Extruder Cooling";
// TRANSLATORS: Extruder Failure
"printer-state-reasons.extruder-failure" = "Extruder Failure";
// TRANSLATORS: Extruder Heating
"printer-state-reasons.extruder-heating" = "Extruder Heating";
// TRANSLATORS: Extruder Jam
"printer-state-reasons.extruder-jam" = "Extruder Jam";
// TRANSLATORS: Extruder Temperature High
"printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High";
// TRANSLATORS: Extruder Temperature Low
"printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low";
// TRANSLATORS: Fan Failure
"printer-state-reasons.fan-failure" = "Fan Failure";
// TRANSLATORS: Fax Modem Life Almost Over
"printer-state-reasons.fax-modem-life-almost-over" = "Fax Modem Life Almost Over";
// TRANSLATORS: Fax Modem Life Over
"printer-state-reasons.fax-modem-life-over" = "Fax Modem Life Over";
// TRANSLATORS: Fax Modem Missing
"printer-state-reasons.fax-modem-missing" = "Fax Modem Missing";
// TRANSLATORS: Fax Modem Turned Off
"printer-state-reasons.fax-modem-turned-off" = "Fax Modem Turned Off";
// TRANSLATORS: Fax Modem Turned On
"printer-state-reasons.fax-modem-turned-on" = "Fax Modem Turned On";
// TRANSLATORS: Folder Added
"printer-state-reasons.folder-added" = "Folder Added";
// TRANSLATORS: Folder Almost Empty
"printer-state-reasons.folder-almost-empty" = "Folder Almost Empty";
// TRANSLATORS: Folder Almost Full
"printer-state-reasons.folder-almost-full" = "Folder Almost Full";
// TRANSLATORS: Folder At Limit
"printer-state-reasons.folder-at-limit" = "Folder At Limit";
// TRANSLATORS: Folder Closed
"printer-state-reasons.folder-closed" = "Folder Closed";
// TRANSLATORS: Folder Configuration Change
"printer-state-reasons.folder-configuration-change" = "Folder Configuration Change";
// TRANSLATORS: Folder Cover Closed
"printer-state-reasons.folder-cover-closed" = "Folder Cover Closed";
// TRANSLATORS: Folder Cover Open
"printer-state-reasons.folder-cover-open" = "Folder Cover Open";
// TRANSLATORS: Folder Empty
"printer-state-reasons.folder-empty" = "Folder Empty";
// TRANSLATORS: Folder Full
"printer-state-reasons.folder-full" = "Folder Full";
// TRANSLATORS: Folder Interlock Closed
"printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed";
// TRANSLATORS: Folder Interlock Open
"printer-state-reasons.folder-interlock-open" = "Folder Interlock Open";
// TRANSLATORS: Folder Jam
"printer-state-reasons.folder-jam" = "Folder Jam";
// TRANSLATORS: Folder Life Almost Over
"printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over";
// TRANSLATORS: Folder Life Over
"printer-state-reasons.folder-life-over" = "Folder Life Over";
// TRANSLATORS: Folder Memory Exhausted
"printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted";
// TRANSLATORS: Folder Missing
"printer-state-reasons.folder-missing" = "Folder Missing";
// TRANSLATORS: Folder Motor Failure
"printer-state-reasons.folder-motor-failure" = "Folder Motor Failure";
// TRANSLATORS: Folder Near Limit
"printer-state-reasons.folder-near-limit" = "Folder Near Limit";
// TRANSLATORS: Folder Offline
"printer-state-reasons.folder-offline" = "Folder Offline";
// TRANSLATORS: Folder Opened
"printer-state-reasons.folder-opened" = "Folder Opened";
// TRANSLATORS: Folder Over Temperature
"printer-state-reasons.folder-over-temperature" = "Folder Over Temperature";
// TRANSLATORS: Folder Power Saver
"printer-state-reasons.folder-power-saver" = "Folder Power Saver";
// TRANSLATORS: Folder Recoverable Failure
"printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure";
// TRANSLATORS: Folder Recoverable Storage
"printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage";
// TRANSLATORS: Folder Removed
"printer-state-reasons.folder-removed" = "Folder Removed";
// TRANSLATORS: Folder Resource Added
"printer-state-reasons.folder-resource-added" = "Folder Resource Added";
// TRANSLATORS: Folder Resource Removed
"printer-state-reasons.folder-resource-removed" = "Folder Resource Removed";
// TRANSLATORS: Folder Thermistor Failure
"printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure";
// TRANSLATORS: Folder Timing Failure
"printer-state-reasons.folder-timing-failure" = "Folder Timing Failure";
// TRANSLATORS: Folder Turned Off
"printer-state-reasons.folder-turned-off" = "Folder Turned Off";
// TRANSLATORS: Folder Turned On
"printer-state-reasons.folder-turned-on" = "Folder Turned On";
// TRANSLATORS: Folder Under Temperature
"printer-state-reasons.folder-under-temperature" = "Folder Under Temperature";
// TRANSLATORS: Folder Unrecoverable Failure
"printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure";
// TRANSLATORS: Folder Unrecoverable Storage Error
"printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error";
// TRANSLATORS: Folder Warming Up
"printer-state-reasons.folder-warming-up" = "Folder Warming Up";
// TRANSLATORS: Fuser temperature high
"printer-state-reasons.fuser-over-temp" = "Fuser Over Temp";
// TRANSLATORS: Fuser temperature low
"printer-state-reasons.fuser-under-temp" = "Fuser Under Temp";
// TRANSLATORS: Hold New Jobs
"printer-state-reasons.hold-new-jobs" = "Hold New Jobs";
// TRANSLATORS: Identify Printer
"printer-state-reasons.identify-printer-requested" = "Identify Printer";
// TRANSLATORS: Imprinter Added
"printer-state-reasons.imprinter-added" = "Imprinter Added";
// TRANSLATORS: Imprinter Almost Empty
"printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty";
// TRANSLATORS: Imprinter Almost Full
"printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full";
// TRANSLATORS: Imprinter At Limit
"printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit";
// TRANSLATORS: Imprinter Closed
"printer-state-reasons.imprinter-closed" = "Imprinter Closed";
// TRANSLATORS: Imprinter Configuration Change
"printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change";
// TRANSLATORS: Imprinter Cover Closed
"printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed";
// TRANSLATORS: Imprinter Cover Open
"printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open";
// TRANSLATORS: Imprinter Empty
"printer-state-reasons.imprinter-empty" = "Imprinter Empty";
// TRANSLATORS: Imprinter Full
"printer-state-reasons.imprinter-full" = "Imprinter Full";
// TRANSLATORS: Imprinter Interlock Closed
"printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed";
// TRANSLATORS: Imprinter Interlock Open
"printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open";
// TRANSLATORS: Imprinter Jam
"printer-state-reasons.imprinter-jam" = "Imprinter Jam";
// TRANSLATORS: Imprinter Life Almost Over
"printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over";
// TRANSLATORS: Imprinter Life Over
"printer-state-reasons.imprinter-life-over" = "Imprinter Life Over";
// TRANSLATORS: Imprinter Memory Exhausted
"printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted";
// TRANSLATORS: Imprinter Missing
"printer-state-reasons.imprinter-missing" = "Imprinter Missing";
// TRANSLATORS: Imprinter Motor Failure
"printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure";
// TRANSLATORS: Imprinter Near Limit
"printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit";
// TRANSLATORS: Imprinter Offline
"printer-state-reasons.imprinter-offline" = "Imprinter Offline";
// TRANSLATORS: Imprinter Opened
"printer-state-reasons.imprinter-opened" = "Imprinter Opened";
// TRANSLATORS: Imprinter Over Temperature
"printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature";
// TRANSLATORS: Imprinter Power Saver
"printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver";
// TRANSLATORS: Imprinter Recoverable Failure
"printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure";
// TRANSLATORS: Imprinter Recoverable Storage
"printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage";
// TRANSLATORS: Imprinter Removed
"printer-state-reasons.imprinter-removed" = "Imprinter Removed";
// TRANSLATORS: Imprinter Resource Added
"printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added";
// TRANSLATORS: Imprinter Resource Removed
"printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed";
// TRANSLATORS: Imprinter Thermistor Failure
"printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure";
// TRANSLATORS: Imprinter Timing Failure
"printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure";
// TRANSLATORS: Imprinter Turned Off
"printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off";
// TRANSLATORS: Imprinter Turned On
"printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On";
// TRANSLATORS: Imprinter Under Temperature
"printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature";
// TRANSLATORS: Imprinter Unrecoverable Failure
"printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure";
// TRANSLATORS: Imprinter Unrecoverable Storage Error
"printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error";
// TRANSLATORS: Imprinter Warming Up
"printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up";
// TRANSLATORS: Input Cannot Feed Size Selected
"printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected";
// TRANSLATORS: Input Manual Input Request
"printer-state-reasons.input-manual-input-request" = "Input Manual Input Request";
// TRANSLATORS: Input Media Color Change
"printer-state-reasons.input-media-color-change" = "Input Media Color Change";
// TRANSLATORS: Input Media Form Parts Change
"printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change";
// TRANSLATORS: Input Media Size Change
"printer-state-reasons.input-media-size-change" = "Input Media Size Change";
// TRANSLATORS: Input Media Tray Failure
"printer-state-reasons.input-media-tray-failure" = "Input Media Tray Failure";
// TRANSLATORS: Input Media Tray Feed Error
"printer-state-reasons.input-media-tray-feed-error" = "Input Media Tray Feed Error";
// TRANSLATORS: Input Media Tray Jam
"printer-state-reasons.input-media-tray-jam" = "Input Media Tray Jam";
// TRANSLATORS: Input Media Type Change
"printer-state-reasons.input-media-type-change" = "Input Media Type Change";
// TRANSLATORS: Input Media Weight Change
"printer-state-reasons.input-media-weight-change" = "Input Media Weight Change";
// TRANSLATORS: Input Pick Roller Failure
"printer-state-reasons.input-pick-roller-failure" = "Input Pick Roller Failure";
// TRANSLATORS: Input Pick Roller Life Over
"printer-state-reasons.input-pick-roller-life-over" = "Input Pick Roller Life Over";
// TRANSLATORS: Input Pick Roller Life Warn
"printer-state-reasons.input-pick-roller-life-warn" = "Input Pick Roller Life Warn";
// TRANSLATORS: Input Pick Roller Missing
"printer-state-reasons.input-pick-roller-missing" = "Input Pick Roller Missing";
// TRANSLATORS: Input Tray Elevation Failure
"printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure";
// TRANSLATORS: Paper tray is missing
"printer-state-reasons.input-tray-missing" = "Input Tray Missing";
// TRANSLATORS: Input Tray Position Failure
"printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure";
// TRANSLATORS: Inserter Added
"printer-state-reasons.inserter-added" = "Inserter Added";
// TRANSLATORS: Inserter Almost Empty
"printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty";
// TRANSLATORS: Inserter Almost Full
"printer-state-reasons.inserter-almost-full" = "Inserter Almost Full";
// TRANSLATORS: Inserter At Limit
"printer-state-reasons.inserter-at-limit" = "Inserter At Limit";
// TRANSLATORS: Inserter Closed
"printer-state-reasons.inserter-closed" = "Inserter Closed";
// TRANSLATORS: Inserter Configuration Change
"printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change";
// TRANSLATORS: Inserter Cover Closed
"printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed";
// TRANSLATORS: Inserter Cover Open
"printer-state-reasons.inserter-cover-open" = "Inserter Cover Open";
// TRANSLATORS: Inserter Empty
"printer-state-reasons.inserter-empty" = "Inserter Empty";
// TRANSLATORS: Inserter Full
"printer-state-reasons.inserter-full" = "Inserter Full";
// TRANSLATORS: Inserter Interlock Closed
"printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed";
// TRANSLATORS: Inserter Interlock Open
"printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open";
// TRANSLATORS: Inserter Jam
"printer-state-reasons.inserter-jam" = "Inserter Jam";
// TRANSLATORS: Inserter Life Almost Over
"printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over";
// TRANSLATORS: Inserter Life Over
"printer-state-reasons.inserter-life-over" = "Inserter Life Over";
// TRANSLATORS: Inserter Memory Exhausted
"printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted";
// TRANSLATORS: Inserter Missing
"printer-state-reasons.inserter-missing" = "Inserter Missing";
// TRANSLATORS: Inserter Motor Failure
"printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure";
// TRANSLATORS: Inserter Near Limit
"printer-state-reasons.inserter-near-limit" = "Inserter Near Limit";
// TRANSLATORS: Inserter Offline
"printer-state-reasons.inserter-offline" = "Inserter Offline";
// TRANSLATORS: Inserter Opened
"printer-state-reasons.inserter-opened" = "Inserter Opened";
// TRANSLATORS: Inserter Over Temperature
"printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature";
// TRANSLATORS: Inserter Power Saver
"printer-state-reasons.inserter-power-saver" = "Inserter Power Saver";
// TRANSLATORS: Inserter Recoverable Failure
"printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure";
// TRANSLATORS: Inserter Recoverable Storage
"printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage";
// TRANSLATORS: Inserter Removed
"printer-state-reasons.inserter-removed" = "Inserter Removed";
// TRANSLATORS: Inserter Resource Added
"printer-state-reasons.inserter-resource-added" = "Inserter Resource Added";
// TRANSLATORS: Inserter Resource Removed
"printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed";
// TRANSLATORS: Inserter Thermistor Failure
"printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure";
// TRANSLATORS: Inserter Timing Failure
"printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure";
// TRANSLATORS: Inserter Turned Off
"printer-state-reasons.inserter-turned-off" = "Inserter Turned Off";
// TRANSLATORS: Inserter Turned On
"printer-state-reasons.inserter-turned-on" = "Inserter Turned On";
// TRANSLATORS: Inserter Under Temperature
"printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature";
// TRANSLATORS: Inserter Unrecoverable Failure
"printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure";
// TRANSLATORS: Inserter Unrecoverable Storage Error
"printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error";
// TRANSLATORS: Inserter Warming Up
"printer-state-reasons.inserter-warming-up" = "Inserter Warming Up";
// TRANSLATORS: Interlock Closed
"printer-state-reasons.interlock-closed" = "Interlock Closed";
// TRANSLATORS: Interlock Open
"printer-state-reasons.interlock-open" = "Interlock Open";
// TRANSLATORS: Interpreter Cartridge Added
"printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added";
// TRANSLATORS: Interpreter Cartridge Removed
"printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed";
// TRANSLATORS: Interpreter Complex Page Encountered
"printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered";
// TRANSLATORS: Interpreter Memory Decrease
"printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease";
// TRANSLATORS: Interpreter Memory Increase
"printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase";
// TRANSLATORS: Interpreter Resource Added
"printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added";
// TRANSLATORS: Interpreter Resource Deleted
"printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted";
// TRANSLATORS: Printer resource unavailable
"printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable";
// TRANSLATORS: Lamp At End of Life
"printer-state-reasons.lamp-at-eol" = "Lamp At End of Life";
// TRANSLATORS: Lamp Failure
"printer-state-reasons.lamp-failure" = "Lamp Failure";
// TRANSLATORS: Lamp Near End of Life
"printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life";
// TRANSLATORS: Laser At End of Life
"printer-state-reasons.laser-at-eol" = "Laser At End of Life";
// TRANSLATORS: Laser Failure
"printer-state-reasons.laser-failure" = "Laser Failure";
// TRANSLATORS: Laser Near End of Life
"printer-state-reasons.laser-near-eol" = "Laser Near End of Life";
// TRANSLATORS: Envelope Maker Added
"printer-state-reasons.make-envelope-added" = "Envelope Maker Added";
// TRANSLATORS: Envelope Maker Almost Empty
"printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty";
// TRANSLATORS: Envelope Maker Almost Full
"printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full";
// TRANSLATORS: Envelope Maker At Limit
"printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit";
// TRANSLATORS: Envelope Maker Closed
"printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed";
// TRANSLATORS: Envelope Maker Configuration Change
"printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change";
// TRANSLATORS: Envelope Maker Cover Closed
"printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed";
// TRANSLATORS: Envelope Maker Cover Open
"printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open";
// TRANSLATORS: Envelope Maker Empty
"printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty";
// TRANSLATORS: Envelope Maker Full
"printer-state-reasons.make-envelope-full" = "Envelope Maker Full";
// TRANSLATORS: Envelope Maker Interlock Closed
"printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed";
// TRANSLATORS: Envelope Maker Interlock Open
"printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open";
// TRANSLATORS: Envelope Maker Jam
"printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam";
// TRANSLATORS: Envelope Maker Life Almost Over
"printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over";
// TRANSLATORS: Envelope Maker Life Over
"printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over";
// TRANSLATORS: Envelope Maker Memory Exhausted
"printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted";
// TRANSLATORS: Envelope Maker Missing
"printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing";
// TRANSLATORS: Envelope Maker Motor Failure
"printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure";
// TRANSLATORS: Envelope Maker Near Limit
"printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit";
// TRANSLATORS: Envelope Maker Offline
"printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline";
// TRANSLATORS: Envelope Maker Opened
"printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened";
// TRANSLATORS: Envelope Maker Over Temperature
"printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature";
// TRANSLATORS: Envelope Maker Power Saver
"printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver";
// TRANSLATORS: Envelope Maker Recoverable Failure
"printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure";
// TRANSLATORS: Envelope Maker Recoverable Storage
"printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage";
// TRANSLATORS: Envelope Maker Removed
"printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed";
// TRANSLATORS: Envelope Maker Resource Added
"printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added";
// TRANSLATORS: Envelope Maker Resource Removed
"printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed";
// TRANSLATORS: Envelope Maker Thermistor Failure
"printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure";
// TRANSLATORS: Envelope Maker Timing Failure
"printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure";
// TRANSLATORS: Envelope Maker Turned Off
"printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off";
// TRANSLATORS: Envelope Maker Turned On
"printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On";
// TRANSLATORS: Envelope Maker Under Temperature
"printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature";
// TRANSLATORS: Envelope Maker Unrecoverable Failure
"printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure";
// TRANSLATORS: Envelope Maker Unrecoverable Storage Error
"printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error";
// TRANSLATORS: Envelope Maker Warming Up
"printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up";
// TRANSLATORS: Marker Adjusting Print Quality
"printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality";
// TRANSLATORS: Marker Cleaner Missing
"printer-state-reasons.marker-cleaner-missing" = "Marker Cleaner Missing";
// TRANSLATORS: Marker Developer Almost Empty
"printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty";
// TRANSLATORS: Marker Developer Empty
"printer-state-reasons.marker-developer-empty" = "Marker Developer Empty";
// TRANSLATORS: Marker Developer Missing
"printer-state-reasons.marker-developer-missing" = "Marker Developer Missing";
// TRANSLATORS: Marker Fuser Missing
"printer-state-reasons.marker-fuser-missing" = "Marker Fuser Missing";
// TRANSLATORS: Marker Fuser Thermistor Failure
"printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure";
// TRANSLATORS: Marker Fuser Timing Failure
"printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure";
// TRANSLATORS: Marker Ink Almost Empty
"printer-state-reasons.marker-ink-almost-empty" = "Low ink";
// TRANSLATORS: Marker Ink Empty
"printer-state-reasons.marker-ink-empty" = "Ink empty";
// TRANSLATORS: Marker Ink Missing
"printer-state-reasons.marker-ink-missing" = "Ink missing";
// TRANSLATORS: Marker Opc Missing
"printer-state-reasons.marker-opc-missing" = "OPC missing";
// TRANSLATORS: Marker Print Ribbon Almost Empty
"printer-state-reasons.marker-print-ribbon-almost-empty" = "Print ribbon Almost Empty";
// TRANSLATORS: Marker Print Ribbon Empty
"printer-state-reasons.marker-print-ribbon-empty" = "Print ribbon Empty";
// TRANSLATORS: Marker Print Ribbon Missing
"printer-state-reasons.marker-print-ribbon-missing" = "Print ribbon missing";
// TRANSLATORS: Marker Supply Almost Empty
"printer-state-reasons.marker-supply-almost-empty" = "Ink/toner almost empty";
// TRANSLATORS: Ink/toner empty
"printer-state-reasons.marker-supply-empty" = "Ink/toner empty";
// TRANSLATORS: Ink/toner low
"printer-state-reasons.marker-supply-low" = "Ink/toner low";
// TRANSLATORS: Marker Supply Missing
"printer-state-reasons.marker-supply-missing" = "Ink/toner missing";
// TRANSLATORS: Marker Toner Cartridge Missing
"printer-state-reasons.marker-toner-cartridge-missing" = "Toner cartridge missing";
// TRANSLATORS: Marker Toner Missing
"printer-state-reasons.marker-toner-missing" = "Toner missing";
// TRANSLATORS: Ink/toner waste bin almost full
"printer-state-reasons.marker-waste-almost-full" = "Ink/toner waste bin almost full";
// TRANSLATORS: Ink/toner waste bin full
"printer-state-reasons.marker-waste-full" = "Ink/toner waste bin full";
// TRANSLATORS: Marker Waste Ink Receptacle Almost Full
"printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full";
// TRANSLATORS: Marker Waste Ink Receptacle Full
"printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full";
// TRANSLATORS: Marker Waste Ink Receptacle Missing
"printer-state-reasons.marker-waste-ink-receptacle-missing" = "Marker Waste Ink Receptacle Missing";
// TRANSLATORS: Marker Waste Missing
"printer-state-reasons.marker-waste-missing" = "Ink/toner waste bin missing";
// TRANSLATORS: Marker Waste Toner Receptacle Almost Full
"printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full";
// TRANSLATORS: Marker Waste Toner Receptacle Full
"printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full";
// TRANSLATORS: Marker Waste Toner Receptacle Missing
"printer-state-reasons.marker-waste-toner-receptacle-missing" = "Marker Waste Toner Receptacle Missing";
// TRANSLATORS: Material Empty
"printer-state-reasons.material-empty" = "Material Empty";
// TRANSLATORS: Material Low
"printer-state-reasons.material-low" = "Material Low";
// TRANSLATORS: Material Needed
"printer-state-reasons.material-needed" = "Material Needed";
// TRANSLATORS: Media Drying
"printer-state-reasons.media-drying" = "Media Drying";
// TRANSLATORS: Paper tray is empty
"printer-state-reasons.media-empty" = "Media Empty";
// TRANSLATORS: Paper jam
"printer-state-reasons.media-jam" = "Media Jam";
// TRANSLATORS: Paper tray is almost empty
"printer-state-reasons.media-low" = "Paper tray is almost empty";
// TRANSLATORS: Load paper
"printer-state-reasons.media-needed" = "Load paper";
// TRANSLATORS: Media Path Cannot Do 2-Sided Printing
"printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing";
// TRANSLATORS: Media Path Failure
"printer-state-reasons.media-path-failure" = "Media Path Failure";
// TRANSLATORS: Media Path Input Empty
"printer-state-reasons.media-path-input-empty" = "Media Path Input Empty";
// TRANSLATORS: Media Path Input Feed Error
"printer-state-reasons.media-path-input-feed-error" = "Media Path Input Feed Error";
// TRANSLATORS: Media Path Input Jam
"printer-state-reasons.media-path-input-jam" = "Media Path Input Jam";
// TRANSLATORS: Media Path Input Request
"printer-state-reasons.media-path-input-request" = "Media Path Input Request";
// TRANSLATORS: Media Path Jam
"printer-state-reasons.media-path-jam" = "Media Path Jam";
// TRANSLATORS: Media Path Media Tray Almost Full
"printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full";
// TRANSLATORS: Media Path Media Tray Full
"printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full";
// TRANSLATORS: Media Path Media Tray Missing
"printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing";
// TRANSLATORS: Media Path Output Feed Error
"printer-state-reasons.media-path-output-feed-error" = "Media Path Output Feed Error";
// TRANSLATORS: Media Path Output Full
"printer-state-reasons.media-path-output-full" = "Media Path Output Full";
// TRANSLATORS: Media Path Output Jam
"printer-state-reasons.media-path-output-jam" = "Media Path Output Jam";
// TRANSLATORS: Media Path Pick Roller Failure
"printer-state-reasons.media-path-pick-roller-failure" = "Media Path Pick Roller Failure";
// TRANSLATORS: Media Path Pick Roller Life Over
"printer-state-reasons.media-path-pick-roller-life-over" = "Media Path Pick Roller Life Over";
// TRANSLATORS: Media Path Pick Roller Life Warn
"printer-state-reasons.media-path-pick-roller-life-warn" = "Media Path Pick Roller Life Warn";
// TRANSLATORS: Media Path Pick Roller Missing
"printer-state-reasons.media-path-pick-roller-missing" = "Media Path Pick Roller Missing";
// TRANSLATORS: Motor Failure
"printer-state-reasons.motor-failure" = "Motor Failure";
// TRANSLATORS: Printer going offline
"printer-state-reasons.moving-to-paused" = "Moving To Paused";
// TRANSLATORS: None
"printer-state-reasons.none" = "None";
// TRANSLATORS: Optical Photoconductor Life Over
"printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over";
// TRANSLATORS: OPC almost at end-of-life
"printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life";
// TRANSLATORS: Check the printer for errors
"printer-state-reasons.other" = "Other";
// TRANSLATORS: Output bin is almost full
"printer-state-reasons.output-area-almost-full" = "Output Area Almost Full";
// TRANSLATORS: Output bin is full
"printer-state-reasons.output-area-full" = "Output Area Full";
// TRANSLATORS: Output Mailbox Select Failure
"printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure";
// TRANSLATORS: Output Media Tray Failure
"printer-state-reasons.output-media-tray-failure" = "Output Media Tray Failure";
// TRANSLATORS: Output Media Tray Feed Error
"printer-state-reasons.output-media-tray-feed-error" = "Output Media Tray Feed Error";
// TRANSLATORS: Output Media Tray Jam
"printer-state-reasons.output-media-tray-jam" = "Output Media Tray Jam";
// TRANSLATORS: Output tray is missing
"printer-state-reasons.output-tray-missing" = "Output Tray Missing";
// TRANSLATORS: Paused
"printer-state-reasons.paused" = "Paused";
// TRANSLATORS: Perforater Added
"printer-state-reasons.perforater-added" = "Perforater Added";
// TRANSLATORS: Perforater Almost Empty
"printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty";
// TRANSLATORS: Perforater Almost Full
"printer-state-reasons.perforater-almost-full" = "Perforater Almost Full";
// TRANSLATORS: Perforater At Limit
"printer-state-reasons.perforater-at-limit" = "Perforater At Limit";
// TRANSLATORS: Perforater Closed
"printer-state-reasons.perforater-closed" = "Perforater Closed";
// TRANSLATORS: Perforater Configuration Change
"printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change";
// TRANSLATORS: Perforater Cover Closed
"printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed";
// TRANSLATORS: Perforater Cover Open
"printer-state-reasons.perforater-cover-open" = "Perforater Cover Open";
// TRANSLATORS: Perforater Empty
"printer-state-reasons.perforater-empty" = "Perforater Empty";
// TRANSLATORS: Perforater Full
"printer-state-reasons.perforater-full" = "Perforater Full";
// TRANSLATORS: Perforater Interlock Closed
"printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed";
// TRANSLATORS: Perforater Interlock Open
"printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open";
// TRANSLATORS: Perforater Jam
"printer-state-reasons.perforater-jam" = "Perforater Jam";
// TRANSLATORS: Perforater Life Almost Over
"printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over";
// TRANSLATORS: Perforater Life Over
"printer-state-reasons.perforater-life-over" = "Perforater Life Over";
// TRANSLATORS: Perforater Memory Exhausted
"printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted";
// TRANSLATORS: Perforater Missing
"printer-state-reasons.perforater-missing" = "Perforater Missing";
// TRANSLATORS: Perforater Motor Failure
"printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure";
// TRANSLATORS: Perforater Near Limit
"printer-state-reasons.perforater-near-limit" = "Perforater Near Limit";
// TRANSLATORS: Perforater Offline
"printer-state-reasons.perforater-offline" = "Perforater Offline";
// TRANSLATORS: Perforater Opened
"printer-state-reasons.perforater-opened" = "Perforater Opened";
// TRANSLATORS: Perforater Over Temperature
"printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature";
// TRANSLATORS: Perforater Power Saver
"printer-state-reasons.perforater-power-saver" = "Perforater Power Saver";
// TRANSLATORS: Perforater Recoverable Failure
"printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure";
// TRANSLATORS: Perforater Recoverable Storage
"printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage";
// TRANSLATORS: Perforater Removed
"printer-state-reasons.perforater-removed" = "Perforater Removed";
// TRANSLATORS: Perforater Resource Added
"printer-state-reasons.perforater-resource-added" = "Perforater Resource Added";
// TRANSLATORS: Perforater Resource Removed
"printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed";
// TRANSLATORS: Perforater Thermistor Failure
"printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure";
// TRANSLATORS: Perforater Timing Failure
"printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure";
// TRANSLATORS: Perforater Turned Off
"printer-state-reasons.perforater-turned-off" = "Perforater Turned Off";
// TRANSLATORS: Perforater Turned On
"printer-state-reasons.perforater-turned-on" = "Perforater Turned On";
// TRANSLATORS: Perforater Under Temperature
"printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature";
// TRANSLATORS: Perforater Unrecoverable Failure
"printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure";
// TRANSLATORS: Perforater Unrecoverable Storage Error
"printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error";
// TRANSLATORS: Perforater Warming Up
"printer-state-reasons.perforater-warming-up" = "Perforater Warming Up";
// TRANSLATORS: Platform Cooling
"printer-state-reasons.platform-cooling" = "Platform Cooling";
// TRANSLATORS: Platform Failure
"printer-state-reasons.platform-failure" = "Platform Failure";
// TRANSLATORS: Platform Heating
"printer-state-reasons.platform-heating" = "Platform Heating";
// TRANSLATORS: Platform Temperature High
"printer-state-reasons.platform-temperature-high" = "Platform Temperature High";
// TRANSLATORS: Platform Temperature Low
"printer-state-reasons.platform-temperature-low" = "Platform Temperature Low";
// TRANSLATORS: Power Down
"printer-state-reasons.power-down" = "Power Down";
// TRANSLATORS: Power Up
"printer-state-reasons.power-up" = "Power Up";
// TRANSLATORS: Printer Reset Manually
"printer-state-reasons.printer-manual-reset" = "Printer Reset Manually";
// TRANSLATORS: Printer Reset Remotely
"printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely";
// TRANSLATORS: Printer Ready To Print
"printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print";
// TRANSLATORS: Puncher Added
"printer-state-reasons.puncher-added" = "Puncher Added";
// TRANSLATORS: Puncher Almost Empty
"printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty";
// TRANSLATORS: Puncher Almost Full
"printer-state-reasons.puncher-almost-full" = "Puncher Almost Full";
// TRANSLATORS: Puncher At Limit
"printer-state-reasons.puncher-at-limit" = "Puncher At Limit";
// TRANSLATORS: Puncher Closed
"printer-state-reasons.puncher-closed" = "Puncher Closed";
// TRANSLATORS: Puncher Configuration Change
"printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change";
// TRANSLATORS: Puncher Cover Closed
"printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed";
// TRANSLATORS: Puncher Cover Open
"printer-state-reasons.puncher-cover-open" = "Puncher Cover Open";
// TRANSLATORS: Puncher Empty
"printer-state-reasons.puncher-empty" = "Puncher Empty";
// TRANSLATORS: Puncher Full
"printer-state-reasons.puncher-full" = "Puncher Full";
// TRANSLATORS: Puncher Interlock Closed
"printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed";
// TRANSLATORS: Puncher Interlock Open
"printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open";
// TRANSLATORS: Puncher Jam
"printer-state-reasons.puncher-jam" = "Puncher Jam";
// TRANSLATORS: Puncher Life Almost Over
"printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over";
// TRANSLATORS: Puncher Life Over
"printer-state-reasons.puncher-life-over" = "Puncher Life Over";
// TRANSLATORS: Puncher Memory Exhausted
"printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted";
// TRANSLATORS: Puncher Missing
"printer-state-reasons.puncher-missing" = "Puncher Missing";
// TRANSLATORS: Puncher Motor Failure
"printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure";
// TRANSLATORS: Puncher Near Limit
"printer-state-reasons.puncher-near-limit" = "Puncher Near Limit";
// TRANSLATORS: Puncher Offline
"printer-state-reasons.puncher-offline" = "Puncher Offline";
// TRANSLATORS: Puncher Opened
"printer-state-reasons.puncher-opened" = "Puncher Opened";
// TRANSLATORS: Puncher Over Temperature
"printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature";
// TRANSLATORS: Puncher Power Saver
"printer-state-reasons.puncher-power-saver" = "Puncher Power Saver";
// TRANSLATORS: Puncher Recoverable Failure
"printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure";
// TRANSLATORS: Puncher Recoverable Storage
"printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage";
// TRANSLATORS: Puncher Removed
"printer-state-reasons.puncher-removed" = "Puncher Removed";
// TRANSLATORS: Puncher Resource Added
"printer-state-reasons.puncher-resource-added" = "Puncher Resource Added";
// TRANSLATORS: Puncher Resource Removed
"printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed";
// TRANSLATORS: Puncher Thermistor Failure
"printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure";
// TRANSLATORS: Puncher Timing Failure
"printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure";
// TRANSLATORS: Puncher Turned Off
"printer-state-reasons.puncher-turned-off" = "Puncher Turned Off";
// TRANSLATORS: Puncher Turned On
"printer-state-reasons.puncher-turned-on" = "Puncher Turned On";
// TRANSLATORS: Puncher Under Temperature
"printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature";
// TRANSLATORS: Puncher Unrecoverable Failure
"printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure";
// TRANSLATORS: Puncher Unrecoverable Storage Error
"printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error";
// TRANSLATORS: Puncher Warming Up
"printer-state-reasons.puncher-warming-up" = "Puncher Warming Up";
// TRANSLATORS: Separation Cutter Added
"printer-state-reasons.separation-cutter-added" = "Separation Cutter Added";
// TRANSLATORS: Separation Cutter Almost Empty
"printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty";
// TRANSLATORS: Separation Cutter Almost Full
"printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full";
// TRANSLATORS: Separation Cutter At Limit
"printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit";
// TRANSLATORS: Separation Cutter Closed
"printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed";
// TRANSLATORS: Separation Cutter Configuration Change
"printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change";
// TRANSLATORS: Separation Cutter Cover Closed
"printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed";
// TRANSLATORS: Separation Cutter Cover Open
"printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open";
// TRANSLATORS: Separation Cutter Empty
"printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty";
// TRANSLATORS: Separation Cutter Full
"printer-state-reasons.separation-cutter-full" = "Separation Cutter Full";
// TRANSLATORS: Separation Cutter Interlock Closed
"printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed";
// TRANSLATORS: Separation Cutter Interlock Open
"printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open";
// TRANSLATORS: Separation Cutter Jam
"printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam";
// TRANSLATORS: Separation Cutter Life Almost Over
"printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over";
// TRANSLATORS: Separation Cutter Life Over
"printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over";
// TRANSLATORS: Separation Cutter Memory Exhausted
"printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted";
// TRANSLATORS: Separation Cutter Missing
"printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing";
// TRANSLATORS: Separation Cutter Motor Failure
"printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure";
// TRANSLATORS: Separation Cutter Near Limit
"printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit";
// TRANSLATORS: Separation Cutter Offline
"printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline";
// TRANSLATORS: Separation Cutter Opened
"printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened";
// TRANSLATORS: Separation Cutter Over Temperature
"printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature";
// TRANSLATORS: Separation Cutter Power Saver
"printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver";
// TRANSLATORS: Separation Cutter Recoverable Failure
"printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure";
// TRANSLATORS: Separation Cutter Recoverable Storage
"printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage";
// TRANSLATORS: Separation Cutter Removed
"printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed";
// TRANSLATORS: Separation Cutter Resource Added
"printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added";
// TRANSLATORS: Separation Cutter Resource Removed
"printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed";
// TRANSLATORS: Separation Cutter Thermistor Failure
"printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure";
// TRANSLATORS: Separation Cutter Timing Failure
"printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure";
// TRANSLATORS: Separation Cutter Turned Off
"printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off";
// TRANSLATORS: Separation Cutter Turned On
"printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On";
// TRANSLATORS: Separation Cutter Under Temperature
"printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature";
// TRANSLATORS: Separation Cutter Unrecoverable Failure
"printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure";
// TRANSLATORS: Separation Cutter Unrecoverable Storage Error
"printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error";
// TRANSLATORS: Separation Cutter Warming Up
"printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up";
// TRANSLATORS: Sheet Rotator Added
"printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added";
// TRANSLATORS: Sheet Rotator Almost Empty
"printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty";
// TRANSLATORS: Sheet Rotator Almost Full
"printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full";
// TRANSLATORS: Sheet Rotator At Limit
"printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit";
// TRANSLATORS: Sheet Rotator Closed
"printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed";
// TRANSLATORS: Sheet Rotator Configuration Change
"printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change";
// TRANSLATORS: Sheet Rotator Cover Closed
"printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed";
// TRANSLATORS: Sheet Rotator Cover Open
"printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open";
// TRANSLATORS: Sheet Rotator Empty
"printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty";
// TRANSLATORS: Sheet Rotator Full
"printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full";
// TRANSLATORS: Sheet Rotator Interlock Closed
"printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed";
// TRANSLATORS: Sheet Rotator Interlock Open
"printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open";
// TRANSLATORS: Sheet Rotator Jam
"printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam";
// TRANSLATORS: Sheet Rotator Life Almost Over
"printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over";
// TRANSLATORS: Sheet Rotator Life Over
"printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over";
// TRANSLATORS: Sheet Rotator Memory Exhausted
"printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted";
// TRANSLATORS: Sheet Rotator Missing
"printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing";
// TRANSLATORS: Sheet Rotator Motor Failure
"printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure";
// TRANSLATORS: Sheet Rotator Near Limit
"printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit";
// TRANSLATORS: Sheet Rotator Offline
"printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline";
// TRANSLATORS: Sheet Rotator Opened
"printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened";
// TRANSLATORS: Sheet Rotator Over Temperature
"printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature";
// TRANSLATORS: Sheet Rotator Power Saver
"printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver";
// TRANSLATORS: Sheet Rotator Recoverable Failure
"printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure";
// TRANSLATORS: Sheet Rotator Recoverable Storage
"printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage";
// TRANSLATORS: Sheet Rotator Removed
"printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed";
// TRANSLATORS: Sheet Rotator Resource Added
"printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added";
// TRANSLATORS: Sheet Rotator Resource Removed
"printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed";
// TRANSLATORS: Sheet Rotator Thermistor Failure
"printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure";
// TRANSLATORS: Sheet Rotator Timing Failure
"printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure";
// TRANSLATORS: Sheet Rotator Turned Off
"printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off";
// TRANSLATORS: Sheet Rotator Turned On
"printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On";
// TRANSLATORS: Sheet Rotator Under Temperature
"printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature";
// TRANSLATORS: Sheet Rotator Unrecoverable Failure
"printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure";
// TRANSLATORS: Sheet Rotator Unrecoverable Storage Error
"printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error";
// TRANSLATORS: Sheet Rotator Warming Up
"printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up";
// TRANSLATORS: Printer offline
"printer-state-reasons.shutdown" = "Shutdown";
// TRANSLATORS: Slitter Added
"printer-state-reasons.slitter-added" = "Slitter Added";
// TRANSLATORS: Slitter Almost Empty
"printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty";
// TRANSLATORS: Slitter Almost Full
"printer-state-reasons.slitter-almost-full" = "Slitter Almost Full";
// TRANSLATORS: Slitter At Limit
"printer-state-reasons.slitter-at-limit" = "Slitter At Limit";
// TRANSLATORS: Slitter Closed
"printer-state-reasons.slitter-closed" = "Slitter Closed";
// TRANSLATORS: Slitter Configuration Change
"printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change";
// TRANSLATORS: Slitter Cover Closed
"printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed";
// TRANSLATORS: Slitter Cover Open
"printer-state-reasons.slitter-cover-open" = "Slitter Cover Open";
// TRANSLATORS: Slitter Empty
"printer-state-reasons.slitter-empty" = "Slitter Empty";
// TRANSLATORS: Slitter Full
"printer-state-reasons.slitter-full" = "Slitter Full";
// TRANSLATORS: Slitter Interlock Closed
"printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed";
// TRANSLATORS: Slitter Interlock Open
"printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open";
// TRANSLATORS: Slitter Jam
"printer-state-reasons.slitter-jam" = "Slitter Jam";
// TRANSLATORS: Slitter Life Almost Over
"printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over";
// TRANSLATORS: Slitter Life Over
"printer-state-reasons.slitter-life-over" = "Slitter Life Over";
// TRANSLATORS: Slitter Memory Exhausted
"printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted";
// TRANSLATORS: Slitter Missing
"printer-state-reasons.slitter-missing" = "Slitter Missing";
// TRANSLATORS: Slitter Motor Failure
"printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure";
// TRANSLATORS: Slitter Near Limit
"printer-state-reasons.slitter-near-limit" = "Slitter Near Limit";
// TRANSLATORS: Slitter Offline
"printer-state-reasons.slitter-offline" = "Slitter Offline";
// TRANSLATORS: Slitter Opened
"printer-state-reasons.slitter-opened" = "Slitter Opened";
// TRANSLATORS: Slitter Over Temperature
"printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature";
// TRANSLATORS: Slitter Power Saver
"printer-state-reasons.slitter-power-saver" = "Slitter Power Saver";
// TRANSLATORS: Slitter Recoverable Failure
"printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure";
// TRANSLATORS: Slitter Recoverable Storage
"printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage";
// TRANSLATORS: Slitter Removed
"printer-state-reasons.slitter-removed" = "Slitter Removed";
// TRANSLATORS: Slitter Resource Added
"printer-state-reasons.slitter-resource-added" = "Slitter Resource Added";
// TRANSLATORS: Slitter Resource Removed
"printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed";
// TRANSLATORS: Slitter Thermistor Failure
"printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure";
// TRANSLATORS: Slitter Timing Failure
"printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure";
// TRANSLATORS: Slitter Turned Off
"printer-state-reasons.slitter-turned-off" = "Slitter Turned Off";
// TRANSLATORS: Slitter Turned On
"printer-state-reasons.slitter-turned-on" = "Slitter Turned On";
// TRANSLATORS: Slitter Under Temperature
"printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature";
// TRANSLATORS: Slitter Unrecoverable Failure
"printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure";
// TRANSLATORS: Slitter Unrecoverable Storage Error
"printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error";
// TRANSLATORS: Slitter Warming Up
"printer-state-reasons.slitter-warming-up" = "Slitter Warming Up";
// TRANSLATORS: Spool Area Full
"printer-state-reasons.spool-area-full" = "Spool Area Full";
// TRANSLATORS: Stacker Added
"printer-state-reasons.stacker-added" = "Stacker Added";
// TRANSLATORS: Stacker Almost Empty
"printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty";
// TRANSLATORS: Stacker Almost Full
"printer-state-reasons.stacker-almost-full" = "Stacker Almost Full";
// TRANSLATORS: Stacker At Limit
"printer-state-reasons.stacker-at-limit" = "Stacker At Limit";
// TRANSLATORS: Stacker Closed
"printer-state-reasons.stacker-closed" = "Stacker Closed";
// TRANSLATORS: Stacker Configuration Change
"printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change";
// TRANSLATORS: Stacker Cover Closed
"printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed";
// TRANSLATORS: Stacker Cover Open
"printer-state-reasons.stacker-cover-open" = "Stacker Cover Open";
// TRANSLATORS: Stacker Empty
"printer-state-reasons.stacker-empty" = "Stacker Empty";
// TRANSLATORS: Stacker Full
"printer-state-reasons.stacker-full" = "Stacker Full";
// TRANSLATORS: Stacker Interlock Closed
"printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed";
// TRANSLATORS: Stacker Interlock Open
"printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open";
// TRANSLATORS: Stacker Jam
"printer-state-reasons.stacker-jam" = "Stacker Jam";
// TRANSLATORS: Stacker Life Almost Over
"printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over";
// TRANSLATORS: Stacker Life Over
"printer-state-reasons.stacker-life-over" = "Stacker Life Over";
// TRANSLATORS: Stacker Memory Exhausted
"printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted";
// TRANSLATORS: Stacker Missing
"printer-state-reasons.stacker-missing" = "Stacker Missing";
// TRANSLATORS: Stacker Motor Failure
"printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure";
// TRANSLATORS: Stacker Near Limit
"printer-state-reasons.stacker-near-limit" = "Stacker Near Limit";
// TRANSLATORS: Stacker Offline
"printer-state-reasons.stacker-offline" = "Stacker Offline";
// TRANSLATORS: Stacker Opened
"printer-state-reasons.stacker-opened" = "Stacker Opened";
// TRANSLATORS: Stacker Over Temperature
"printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature";
// TRANSLATORS: Stacker Power Saver
"printer-state-reasons.stacker-power-saver" = "Stacker Power Saver";
// TRANSLATORS: Stacker Recoverable Failure
"printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure";
// TRANSLATORS: Stacker Recoverable Storage
"printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage";
// TRANSLATORS: Stacker Removed
"printer-state-reasons.stacker-removed" = "Stacker Removed";
// TRANSLATORS: Stacker Resource Added
"printer-state-reasons.stacker-resource-added" = "Stacker Resource Added";
// TRANSLATORS: Stacker Resource Removed
"printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed";
// TRANSLATORS: Stacker Thermistor Failure
"printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure";
// TRANSLATORS: Stacker Timing Failure
"printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure";
// TRANSLATORS: Stacker Turned Off
"printer-state-reasons.stacker-turned-off" = "Stacker Turned Off";
// TRANSLATORS: Stacker Turned On
"printer-state-reasons.stacker-turned-on" = "Stacker Turned On";
// TRANSLATORS: Stacker Under Temperature
"printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature";
// TRANSLATORS: Stacker Unrecoverable Failure
"printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure";
// TRANSLATORS: Stacker Unrecoverable Storage Error
"printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error";
// TRANSLATORS: Stacker Warming Up
"printer-state-reasons.stacker-warming-up" = "Stacker Warming Up";
// TRANSLATORS: Stapler Added
"printer-state-reasons.stapler-added" = "Stapler Added";
// TRANSLATORS: Stapler Almost Empty
"printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty";
// TRANSLATORS: Stapler Almost Full
"printer-state-reasons.stapler-almost-full" = "Stapler Almost Full";
// TRANSLATORS: Stapler At Limit
"printer-state-reasons.stapler-at-limit" = "Stapler At Limit";
// TRANSLATORS: Stapler Closed
"printer-state-reasons.stapler-closed" = "Stapler Closed";
// TRANSLATORS: Stapler Configuration Change
"printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change";
// TRANSLATORS: Stapler Cover Closed
"printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed";
// TRANSLATORS: Stapler Cover Open
"printer-state-reasons.stapler-cover-open" = "Stapler Cover Open";
// TRANSLATORS: Stapler Empty
"printer-state-reasons.stapler-empty" = "Stapler Empty";
// TRANSLATORS: Stapler Full
"printer-state-reasons.stapler-full" = "Stapler Full";
// TRANSLATORS: Stapler Interlock Closed
"printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed";
// TRANSLATORS: Stapler Interlock Open
"printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open";
// TRANSLATORS: Stapler Jam
"printer-state-reasons.stapler-jam" = "Stapler Jam";
// TRANSLATORS: Stapler Life Almost Over
"printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over";
// TRANSLATORS: Stapler Life Over
"printer-state-reasons.stapler-life-over" = "Stapler Life Over";
// TRANSLATORS: Stapler Memory Exhausted
"printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted";
// TRANSLATORS: Stapler Missing
"printer-state-reasons.stapler-missing" = "Stapler Missing";
// TRANSLATORS: Stapler Motor Failure
"printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure";
// TRANSLATORS: Stapler Near Limit
"printer-state-reasons.stapler-near-limit" = "Stapler Near Limit";
// TRANSLATORS: Stapler Offline
"printer-state-reasons.stapler-offline" = "Stapler Offline";
// TRANSLATORS: Stapler Opened
"printer-state-reasons.stapler-opened" = "Stapler Opened";
// TRANSLATORS: Stapler Over Temperature
"printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature";
// TRANSLATORS: Stapler Power Saver
"printer-state-reasons.stapler-power-saver" = "Stapler Power Saver";
// TRANSLATORS: Stapler Recoverable Failure
"printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure";
// TRANSLATORS: Stapler Recoverable Storage
"printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage";
// TRANSLATORS: Stapler Removed
"printer-state-reasons.stapler-removed" = "Stapler Removed";
// TRANSLATORS: Stapler Resource Added
"printer-state-reasons.stapler-resource-added" = "Stapler Resource Added";
// TRANSLATORS: Stapler Resource Removed
"printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed";
// TRANSLATORS: Stapler Thermistor Failure
"printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure";
// TRANSLATORS: Stapler Timing Failure
"printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure";
// TRANSLATORS: Stapler Turned Off
"printer-state-reasons.stapler-turned-off" = "Stapler Turned Off";
// TRANSLATORS: Stapler Turned On
"printer-state-reasons.stapler-turned-on" = "Stapler Turned On";
// TRANSLATORS: Stapler Under Temperature
"printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature";
// TRANSLATORS: Stapler Unrecoverable Failure
"printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure";
// TRANSLATORS: Stapler Unrecoverable Storage Error
"printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error";
// TRANSLATORS: Stapler Warming Up
"printer-state-reasons.stapler-warming-up" = "Stapler Warming Up";
// TRANSLATORS: Stitcher Added
"printer-state-reasons.stitcher-added" = "Stitcher Added";
// TRANSLATORS: Stitcher Almost Empty
"printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty";
// TRANSLATORS: Stitcher Almost Full
"printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full";
// TRANSLATORS: Stitcher At Limit
"printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit";
// TRANSLATORS: Stitcher Closed
"printer-state-reasons.stitcher-closed" = "Stitcher Closed";
// TRANSLATORS: Stitcher Configuration Change
"printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change";
// TRANSLATORS: Stitcher Cover Closed
"printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed";
// TRANSLATORS: Stitcher Cover Open
"printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open";
// TRANSLATORS: Stitcher Empty
"printer-state-reasons.stitcher-empty" = "Stitcher Empty";
// TRANSLATORS: Stitcher Full
"printer-state-reasons.stitcher-full" = "Stitcher Full";
// TRANSLATORS: Stitcher Interlock Closed
"printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed";
// TRANSLATORS: Stitcher Interlock Open
"printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open";
// TRANSLATORS: Stitcher Jam
"printer-state-reasons.stitcher-jam" = "Stitcher Jam";
// TRANSLATORS: Stitcher Life Almost Over
"printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over";
// TRANSLATORS: Stitcher Life Over
"printer-state-reasons.stitcher-life-over" = "Stitcher Life Over";
// TRANSLATORS: Stitcher Memory Exhausted
"printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted";
// TRANSLATORS: Stitcher Missing
"printer-state-reasons.stitcher-missing" = "Stitcher Missing";
// TRANSLATORS: Stitcher Motor Failure
"printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure";
// TRANSLATORS: Stitcher Near Limit
"printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit";
// TRANSLATORS: Stitcher Offline
"printer-state-reasons.stitcher-offline" = "Stitcher Offline";
// TRANSLATORS: Stitcher Opened
"printer-state-reasons.stitcher-opened" = "Stitcher Opened";
// TRANSLATORS: Stitcher Over Temperature
"printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature";
// TRANSLATORS: Stitcher Power Saver
"printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver";
// TRANSLATORS: Stitcher Recoverable Failure
"printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure";
// TRANSLATORS: Stitcher Recoverable Storage
"printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage";
// TRANSLATORS: Stitcher Removed
"printer-state-reasons.stitcher-removed" = "Stitcher Removed";
// TRANSLATORS: Stitcher Resource Added
"printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added";
// TRANSLATORS: Stitcher Resource Removed
"printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed";
// TRANSLATORS: Stitcher Thermistor Failure
"printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure";
// TRANSLATORS: Stitcher Timing Failure
"printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure";
// TRANSLATORS: Stitcher Turned Off
"printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off";
// TRANSLATORS: Stitcher Turned On
"printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On";
// TRANSLATORS: Stitcher Under Temperature
"printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature";
// TRANSLATORS: Stitcher Unrecoverable Failure
"printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure";
// TRANSLATORS: Stitcher Unrecoverable Storage Error
"printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error";
// TRANSLATORS: Stitcher Warming Up
"printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up";
// TRANSLATORS: Partially stopped
"printer-state-reasons.stopped-partly" = "Stopped Partly";
// TRANSLATORS: Stopping
"printer-state-reasons.stopping" = "Stopping";
// TRANSLATORS: Subunit Added
"printer-state-reasons.subunit-added" = "Subunit Added";
// TRANSLATORS: Subunit Almost Empty
"printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty";
// TRANSLATORS: Subunit Almost Full
"printer-state-reasons.subunit-almost-full" = "Subunit Almost Full";
// TRANSLATORS: Subunit At Limit
"printer-state-reasons.subunit-at-limit" = "Subunit At Limit";
// TRANSLATORS: Subunit Closed
"printer-state-reasons.subunit-closed" = "Subunit Closed";
// TRANSLATORS: Subunit Cooling Down
"printer-state-reasons.subunit-cooling-down" = "Subunit Cooling Down";
// TRANSLATORS: Subunit Empty
"printer-state-reasons.subunit-empty" = "Subunit Empty";
// TRANSLATORS: Subunit Full
"printer-state-reasons.subunit-full" = "Subunit Full";
// TRANSLATORS: Subunit Life Almost Over
"printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over";
// TRANSLATORS: Subunit Life Over
"printer-state-reasons.subunit-life-over" = "Subunit Life Over";
// TRANSLATORS: Subunit Memory Exhausted
"printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted";
// TRANSLATORS: Subunit Missing
"printer-state-reasons.subunit-missing" = "Subunit Missing";
// TRANSLATORS: Subunit Motor Failure
"printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure";
// TRANSLATORS: Subunit Near Limit
"printer-state-reasons.subunit-near-limit" = "Subunit Near Limit";
// TRANSLATORS: Subunit Offline
"printer-state-reasons.subunit-offline" = "Subunit Offline";
// TRANSLATORS: Subunit Opened
"printer-state-reasons.subunit-opened" = "Subunit Opened";
// TRANSLATORS: Subunit Over Temperature
"printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature";
// TRANSLATORS: Subunit Power Saver
"printer-state-reasons.subunit-power-saver" = "Subunit Power Saver";
// TRANSLATORS: Subunit Recoverable Failure
"printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure";
// TRANSLATORS: Subunit Recoverable Storage
"printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage";
// TRANSLATORS: Subunit Removed
"printer-state-reasons.subunit-removed" = "Subunit Removed";
// TRANSLATORS: Subunit Resource Added
"printer-state-reasons.subunit-resource-added" = "Subunit Resource Added";
// TRANSLATORS: Subunit Resource Removed
"printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed";
// TRANSLATORS: Subunit Thermistor Failure
"printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure";
// TRANSLATORS: Subunit Timing Failure
"printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure";
// TRANSLATORS: Subunit Turned Off
"printer-state-reasons.subunit-turned-off" = "Subunit Turned Off";
// TRANSLATORS: Subunit Turned On
"printer-state-reasons.subunit-turned-on" = "Subunit Turned On";
// TRANSLATORS: Subunit Under Temperature
"printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature";
// TRANSLATORS: Subunit Unrecoverable Failure
"printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure";
// TRANSLATORS: Subunit Unrecoverable Storage
"printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage";
// TRANSLATORS: Subunit Warming Up
"printer-state-reasons.subunit-warming-up" = "Subunit Warming Up";
// TRANSLATORS: Printer stopped responding
"printer-state-reasons.timed-out" = "Timed Out";
// TRANSLATORS: Out of toner
"printer-state-reasons.toner-empty" = "Toner Empty";
// TRANSLATORS: Toner low
"printer-state-reasons.toner-low" = "Toner Low";
// TRANSLATORS: Trimmer Added
"printer-state-reasons.trimmer-added" = "Trimmer Added";
// TRANSLATORS: Trimmer Almost Empty
"printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty";
// TRANSLATORS: Trimmer Almost Full
"printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full";
// TRANSLATORS: Trimmer At Limit
"printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit";
// TRANSLATORS: Trimmer Closed
"printer-state-reasons.trimmer-closed" = "Trimmer Closed";
// TRANSLATORS: Trimmer Configuration Change
"printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change";
// TRANSLATORS: Trimmer Cover Closed
"printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed";
// TRANSLATORS: Trimmer Cover Open
"printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open";
// TRANSLATORS: Trimmer Empty
"printer-state-reasons.trimmer-empty" = "Trimmer Empty";
// TRANSLATORS: Trimmer Full
"printer-state-reasons.trimmer-full" = "Trimmer Full";
// TRANSLATORS: Trimmer Interlock Closed
"printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed";
// TRANSLATORS: Trimmer Interlock Open
"printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open";
// TRANSLATORS: Trimmer Jam
"printer-state-reasons.trimmer-jam" = "Trimmer Jam";
// TRANSLATORS: Trimmer Life Almost Over
"printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over";
// TRANSLATORS: Trimmer Life Over
"printer-state-reasons.trimmer-life-over" = "Trimmer Life Over";
// TRANSLATORS: Trimmer Memory Exhausted
"printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted";
// TRANSLATORS: Trimmer Missing
"printer-state-reasons.trimmer-missing" = "Trimmer Missing";
// TRANSLATORS: Trimmer Motor Failure
"printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure";
// TRANSLATORS: Trimmer Near Limit
"printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit";
// TRANSLATORS: Trimmer Offline
"printer-state-reasons.trimmer-offline" = "Trimmer Offline";
// TRANSLATORS: Trimmer Opened
"printer-state-reasons.trimmer-opened" = "Trimmer Opened";
// TRANSLATORS: Trimmer Over Temperature
"printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature";
// TRANSLATORS: Trimmer Power Saver
"printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver";
// TRANSLATORS: Trimmer Recoverable Failure
"printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure";
// TRANSLATORS: Trimmer Recoverable Storage
"printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage";
// TRANSLATORS: Trimmer Removed
"printer-state-reasons.trimmer-removed" = "Trimmer Removed";
// TRANSLATORS: Trimmer Resource Added
"printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added";
// TRANSLATORS: Trimmer Resource Removed
"printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed";
// TRANSLATORS: Trimmer Thermistor Failure
"printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure";
// TRANSLATORS: Trimmer Timing Failure
"printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure";
// TRANSLATORS: Trimmer Turned Off
"printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off";
// TRANSLATORS: Trimmer Turned On
"printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On";
// TRANSLATORS: Trimmer Under Temperature
"printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature";
// TRANSLATORS: Trimmer Unrecoverable Failure
"printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure";
// TRANSLATORS: Trimmer Unrecoverable Storage Error
"printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error";
// TRANSLATORS: Trimmer Warming Up
"printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up";
// TRANSLATORS: Unknown
"printer-state-reasons.unknown" = "Unknown";
// TRANSLATORS: Wrapper Added
"printer-state-reasons.wrapper-added" = "Wrapper Added";
// TRANSLATORS: Wrapper Almost Empty
"printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty";
// TRANSLATORS: Wrapper Almost Full
"printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full";
// TRANSLATORS: Wrapper At Limit
"printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit";
// TRANSLATORS: Wrapper Closed
"printer-state-reasons.wrapper-closed" = "Wrapper Closed";
// TRANSLATORS: Wrapper Configuration Change
"printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change";
// TRANSLATORS: Wrapper Cover Closed
"printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed";
// TRANSLATORS: Wrapper Cover Open
"printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open";
// TRANSLATORS: Wrapper Empty
"printer-state-reasons.wrapper-empty" = "Wrapper Empty";
// TRANSLATORS: Wrapper Full
"printer-state-reasons.wrapper-full" = "Wrapper Full";
// TRANSLATORS: Wrapper Interlock Closed
"printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed";
// TRANSLATORS: Wrapper Interlock Open
"printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open";
// TRANSLATORS: Wrapper Jam
"printer-state-reasons.wrapper-jam" = "Wrapper Jam";
// TRANSLATORS: Wrapper Life Almost Over
"printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over";
// TRANSLATORS: Wrapper Life Over
"printer-state-reasons.wrapper-life-over" = "Wrapper Life Over";
// TRANSLATORS: Wrapper Memory Exhausted
"printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted";
// TRANSLATORS: Wrapper Missing
"printer-state-reasons.wrapper-missing" = "Wrapper Missing";
// TRANSLATORS: Wrapper Motor Failure
"printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure";
// TRANSLATORS: Wrapper Near Limit
"printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit";
// TRANSLATORS: Wrapper Offline
"printer-state-reasons.wrapper-offline" = "Wrapper Offline";
// TRANSLATORS: Wrapper Opened
"printer-state-reasons.wrapper-opened" = "Wrapper Opened";
// TRANSLATORS: Wrapper Over Temperature
"printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature";
// TRANSLATORS: Wrapper Power Saver
"printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver";
// TRANSLATORS: Wrapper Recoverable Failure
"printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure";
// TRANSLATORS: Wrapper Recoverable Storage
"printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage";
// TRANSLATORS: Wrapper Removed
"printer-state-reasons.wrapper-removed" = "Wrapper Removed";
// TRANSLATORS: Wrapper Resource Added
"printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added";
// TRANSLATORS: Wrapper Resource Removed
"printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed";
// TRANSLATORS: Wrapper Thermistor Failure
"printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure";
// TRANSLATORS: Wrapper Timing Failure
"printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure";
// TRANSLATORS: Wrapper Turned Off
"printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off";
// TRANSLATORS: Wrapper Turned On
"printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On";
// TRANSLATORS: Wrapper Under Temperature
"printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature";
// TRANSLATORS: Wrapper Unrecoverable Failure
"printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure";
// TRANSLATORS: Wrapper Unrecoverable Storage Error
"printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error";
// TRANSLATORS: Wrapper Warming Up
"printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up";
// TRANSLATORS: Idle
"printer-state.3" = "Idle";
// TRANSLATORS: Processing
"printer-state.4" = "Processing";
// TRANSLATORS: Stopped
"printer-state.5" = "Stopped";
// TRANSLATORS: Printer Uptime
"printer-up-time" = "Printer Uptime";
"processing" = "processing";
// TRANSLATORS: Proof Print
"proof-print" = "Proof Print";
// TRANSLATORS: Proof Print Copies
"proof-print-copies" = "Proof Print Copies";
// TRANSLATORS: Punching
"punching" = "Punching";
// TRANSLATORS: Punching Locations
"punching-locations" = "Punching Locations";
// TRANSLATORS: Punching Offset
"punching-offset" = "Punching Offset";
// TRANSLATORS: Punch Edge
"punching-reference-edge" = "Punch Edge";
// TRANSLATORS: Bottom
"punching-reference-edge.bottom" = "Bottom";
// TRANSLATORS: Left
"punching-reference-edge.left" = "Left";
// TRANSLATORS: Right
"punching-reference-edge.right" = "Right";
// TRANSLATORS: Top
"punching-reference-edge.top" = "Top";
"request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))";
"request-id uses indefinite length" = "request-id uses indefinite length";
// TRANSLATORS: Requested Attributes
"requested-attributes" = "Requested Attributes";
// TRANSLATORS: Retry Interval
"retry-interval" = "Retry Interval";
// TRANSLATORS: Retry Timeout
"retry-time-out" = "Retry Timeout";
// TRANSLATORS: Save Disposition
"save-disposition" = "Save Disposition";
// TRANSLATORS: None
"save-disposition.none" = "None";
// TRANSLATORS: Print and Save
"save-disposition.print-save" = "Print and Save";
// TRANSLATORS: Save Only
"save-disposition.save-only" = "Save Only";
// TRANSLATORS: Save Document Format
"save-document-format" = "Save Document Format";
// TRANSLATORS: Save Info
"save-info" = "Save Info";
// TRANSLATORS: Save Location
"save-location" = "Save Location";
// TRANSLATORS: Save Name
"save-name" = "Save Name";
"scheduler is not running" = "scheduler is not running";
"scheduler is running" = "scheduler is running";
// TRANSLATORS: Separator Sheets
"separator-sheets" = "Separator Sheets";
// TRANSLATORS: Type of Separator Sheets
"separator-sheets-type" = "Type of Separator Sheets";
// TRANSLATORS: Start and End Sheets
"separator-sheets-type.both-sheets" = "Start and End Sheets";
// TRANSLATORS: End Sheet
"separator-sheets-type.end-sheet" = "End Sheet";
// TRANSLATORS: None
"separator-sheets-type.none" = "None";
// TRANSLATORS: Slip Sheets
"separator-sheets-type.slip-sheets" = "Slip Sheets";
// TRANSLATORS: Start Sheet
"separator-sheets-type.start-sheet" = "Start Sheet";
// TRANSLATORS: 2-Sided Printing
"sides" = "2-Sided Printing";
// TRANSLATORS: Off
"sides.one-sided" = "Off";
// TRANSLATORS: On (Portrait)
"sides.two-sided-long-edge" = "On (Portrait)";
// TRANSLATORS: On (Landscape)
"sides.two-sided-short-edge" = "On (Landscape)";
"stat of %s failed: %s" = "stat of %s failed: %s";
"status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue.";
// TRANSLATORS: Status Message
"status-message" = "Status Message";
// TRANSLATORS: Staple
"stitching" = "Staple";
// TRANSLATORS: Stitching Angle
"stitching-angle" = "Stitching Angle";
// TRANSLATORS: Stitching Locations
"stitching-locations" = "Stitching Locations";
// TRANSLATORS: Staple Method
"stitching-method" = "Staple Method";
// TRANSLATORS: Automatic
"stitching-method.auto" = "Automatic";
// TRANSLATORS: Crimp
"stitching-method.crimp" = "Crimp";
// TRANSLATORS: Wire
"stitching-method.wire" = "Wire";
// TRANSLATORS: Stitching Offset
"stitching-offset" = "Stitching Offset";
// TRANSLATORS: Staple Edge
"stitching-reference-edge" = "Staple Edge";
// TRANSLATORS: Bottom
"stitching-reference-edge.bottom" = "Bottom";
// TRANSLATORS: Left
"stitching-reference-edge.left" = "Left";
// TRANSLATORS: Right
"stitching-reference-edge.right" = "Right";
// TRANSLATORS: Top
"stitching-reference-edge.top" = "Top";
"stopped" = "stopped";
// TRANSLATORS: Subject
"subject" = "Subject";
// TRANSLATORS: Subscription Privacy Attributes
"subscription-privacy-attributes" = "Subscription Privacy Attributes";
// TRANSLATORS: All
"subscription-privacy-attributes.all" = "All";
// TRANSLATORS: Default
"subscription-privacy-attributes.default" = "Default";
// TRANSLATORS: None
"subscription-privacy-attributes.none" = "None";
// TRANSLATORS: Subscription Description
"subscription-privacy-attributes.subscription-description" = "Subscription Description";
// TRANSLATORS: Subscription Template
"subscription-privacy-attributes.subscription-template" = "Subscription Template";
// TRANSLATORS: Subscription Privacy Scope
"subscription-privacy-scope" = "Subscription Privacy Scope";
// TRANSLATORS: All
"subscription-privacy-scope.all" = "All";
// TRANSLATORS: Default
"subscription-privacy-scope.default" = "Default";
// TRANSLATORS: None
"subscription-privacy-scope.none" = "None";
// TRANSLATORS: Owner
"subscription-privacy-scope.owner" = "Owner";
"system default destination: %s" = "system default destination: %s";
"system default destination: %s/%s" = "system default destination: %s/%s";
// TRANSLATORS: T33 Subaddress
"t33-subaddress" = "T33 Subaddress";
// TRANSLATORS: To Name
"to-name" = "To Name";
// TRANSLATORS: Transmission Status
"transmission-status" = "Transmission Status";
// TRANSLATORS: Pending
"transmission-status.3" = "Pending";
// TRANSLATORS: Pending Retry
"transmission-status.4" = "Pending Retry";
// TRANSLATORS: Processing
"transmission-status.5" = "Processing";
// TRANSLATORS: Canceled
"transmission-status.7" = "Canceled";
// TRANSLATORS: Aborted
"transmission-status.8" = "Aborted";
// TRANSLATORS: Completed
"transmission-status.9" = "Completed";
// TRANSLATORS: Cut
"trimming" = "Cut";
// TRANSLATORS: Cut Position
"trimming-offset" = "Cut Position";
// TRANSLATORS: Cut Edge
"trimming-reference-edge" = "Cut Edge";
// TRANSLATORS: Bottom
"trimming-reference-edge.bottom" = "Bottom";
// TRANSLATORS: Left
"trimming-reference-edge.left" = "Left";
// TRANSLATORS: Right
"trimming-reference-edge.right" = "Right";
// TRANSLATORS: Top
"trimming-reference-edge.top" = "Top";
// TRANSLATORS: Type of Cut
"trimming-type" = "Type of Cut";
// TRANSLATORS: Draw Line
"trimming-type.draw-line" = "Draw Line";
// TRANSLATORS: Full
"trimming-type.full" = "Full";
// TRANSLATORS: Partial
"trimming-type.partial" = "Partial";
// TRANSLATORS: Perforate
"trimming-type.perforate" = "Perforate";
// TRANSLATORS: Score
"trimming-type.score" = "Score";
// TRANSLATORS: Tab
"trimming-type.tab" = "Tab";
// TRANSLATORS: Cut After
"trimming-when" = "Cut After";
// TRANSLATORS: Every Document
"trimming-when.after-documents" = "Every Document";
// TRANSLATORS: Job
"trimming-when.after-job" = "Job";
// TRANSLATORS: Every Set
"trimming-when.after-sets" = "Every Set";
// TRANSLATORS: Every Page
"trimming-when.after-sheets" = "Every Page";
"unknown" = "unknown";
"untitled" = "untitled";
"variable-bindings uses indefinite length" = "variable-bindings uses indefinite length";
// TRANSLATORS: X Accuracy
"x-accuracy" = "X Accuracy";
// TRANSLATORS: X Dimension
"x-dimension" = "X Dimension";
// TRANSLATORS: X Offset
"x-offset" = "X Offset";
// TRANSLATORS: X Origin
"x-origin" = "X Origin";
// TRANSLATORS: Y Accuracy
"y-accuracy" = "Y Accuracy";
// TRANSLATORS: Y Dimension
"y-dimension" = "Y Dimension";
// TRANSLATORS: Y Offset
"y-offset" = "Y Offset";
// TRANSLATORS: Y Origin
"y-origin" = "Y Origin";
// TRANSLATORS: Z Accuracy
"z-accuracy" = "Z Accuracy";
// TRANSLATORS: Z Dimension
"z-dimension" = "Z Dimension";
// TRANSLATORS: Z Offset
"z-offset" = "Z Offset";
"{service_domain} Domain name" = "{service_domain} Domain name";
"{service_hostname} Fully-qualified domain name" = "{service_hostname} Fully-qualified domain name";
"{service_name} Service instance name" = "{service_name} Service instance name";
"{service_port} Port number" = "{service_port} Port number";
"{service_regtype} DNS-SD registration type" = "{service_regtype} DNS-SD registration type";
"{service_scheme} URI scheme" = "{service_scheme} URI scheme";
"{service_uri} URI" = "{service_uri} URI";
"{txt_*} Value of TXT record key" = "{txt_*} Value of TXT record key";
"{} URI" = "{} URI";
"~/.cups/lpoptions file names default destination that does not exist." = "~/.cups/lpoptions file names default destination that does not exist.";
Reference in New Issue View Git Blame Copy Permalink