Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
dnl
|
|
|
|
dnl virt-lib.m4: Helper macros for checking for libraries
|
|
|
|
dnl
|
2014-02-26 00:42:29 +08:00
|
|
|
dnl Copyright (C) 2012-2014 Red Hat, Inc.
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
dnl
|
|
|
|
dnl This library is free software; you can redistribute it and/or
|
|
|
|
dnl modify it under the terms of the GNU Lesser General Public
|
|
|
|
dnl License as published by the Free Software Foundation; either
|
|
|
|
dnl version 2.1 of the License, or (at your option) any later version.
|
|
|
|
dnl
|
|
|
|
dnl This library is distributed in the hope that it will be useful,
|
|
|
|
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
dnl Lesser General Public License for more details.
|
|
|
|
dnl
|
|
|
|
dnl You should have received a copy of the GNU Lesser General Public
|
|
|
|
dnl License along with this library. If not, see
|
|
|
|
dnl <http://www.gnu.org/licenses/>.
|
|
|
|
dnl
|
|
|
|
|
|
|
|
|
|
|
|
dnl Probe for existence of libXXXX and set WITH_XXX
|
|
|
|
dnl config header var, WITH_XXXX make conditional and
|
|
|
|
dnl with_XXX configure shell var.
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_CHECK_LIB([CHECK_NAME], [LIBRARY_NAME],
|
|
|
|
dnl [FUNCTION_NAME], [HEADER_NAME])
|
|
|
|
dnl
|
|
|
|
dnl CHECK_NAME: Suffix/prefix used for variables / flags, in uppercase.
|
|
|
|
dnl Used to set
|
|
|
|
dnl config.h: WITH_XXX macro
|
|
|
|
dnl Makefile: WITH_XXX conditional
|
|
|
|
dnl Makefile: XXX_CFLAGS, XXX_LIBS variables
|
|
|
|
dnl configure: --with-xxx argument
|
|
|
|
dnl configure: with_xxx variable
|
|
|
|
dnl
|
|
|
|
dnl LIBRARY_NAME: base name of library to check for eg libXXX.so
|
|
|
|
dnl FUNCTION_NAME: function to check for in libXXX.so
|
|
|
|
dnl HEADER_NAME: header file to check for
|
|
|
|
dnl
|
|
|
|
dnl e.g.
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_CHECK_LIB([SELINUX], [selinux],
|
|
|
|
dnl [getfilecon], [selinux/selinux.h])
|
|
|
|
dnl LIBVIRT_CHECK_LIB([SANLOCK], [sanlock_client],
|
|
|
|
dnl [sanlock_init], [sanlock.h])
|
|
|
|
dnl LIBVIRT_CHECK_LIB([LIBATTR], [attr],
|
|
|
|
dnl [getxattr], [attr/attr.h])
|
|
|
|
dnl
|
|
|
|
AC_DEFUN([LIBVIRT_CHECK_LIB],[
|
|
|
|
m4_pushdef([check_name], [$1])
|
|
|
|
m4_pushdef([library_name], [$2])
|
|
|
|
m4_pushdef([function_name], [$3])
|
|
|
|
m4_pushdef([header_name], [$4])
|
|
|
|
|
|
|
|
m4_pushdef([check_name_lc], m4_tolower(check_name))
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_pushdef([check_name_dash], m4_translit(check_name_lc, [_], [-]))
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
m4_pushdef([config_var], [WITH_]check_name)
|
|
|
|
m4_pushdef([make_var], [WITH_]check_name)
|
|
|
|
m4_pushdef([cflags_var], check_name[_CFLAGS])
|
|
|
|
m4_pushdef([libs_var], check_name[_LIBS])
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_pushdef([arg_var], [with-]check_name_dash)
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
m4_pushdef([with_var], [with_]check_name_lc)
|
|
|
|
|
2013-09-06 04:32:25 +08:00
|
|
|
m4_divert_text([DEFAULTS], [with_var][=check])
|
2014-02-26 00:42:29 +08:00
|
|
|
AC_ARG_WITH(check_name_dash,
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
[AS_HELP_STRING([--arg_var],
|
2013-09-06 04:32:25 +08:00
|
|
|
[with lib]]m4_dquote(library_name)[[ support @<:@default=check@:>@])])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
old_LIBS=$LIBS
|
|
|
|
old_CFLAGS=$CFLAGS
|
|
|
|
cflags_var=
|
|
|
|
libs_var=
|
|
|
|
|
|
|
|
fail=0
|
|
|
|
if test "x$with_var" != "xno" ; then
|
|
|
|
if test "x$with_var" != "xyes" && test "x$with_var" != "xcheck" ; then
|
|
|
|
cflags_var="-I$with_var/include"
|
|
|
|
libs_var="-L$with_var/lib"
|
|
|
|
fi
|
|
|
|
CFLAGS="$CFLAGS $cflags_var"
|
|
|
|
LIBS="$LIBS $libs_var"
|
|
|
|
AC_CHECK_LIB(library_name, function_name, [],[
|
|
|
|
if test "x$with_var" != "xcheck"; then
|
|
|
|
fail=1
|
|
|
|
fi
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=no
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
])
|
|
|
|
if test "$fail" = "0" && test "x$with_var" != "xno" ; then
|
|
|
|
AC_CHECK_HEADER([header_name], [
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=yes
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
],[
|
|
|
|
if test "x$with_var" != "xcheck"; then
|
|
|
|
fail=1
|
|
|
|
fi
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=no
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
])
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
|
|
|
|
LIBS=$old_LIBS
|
|
|
|
CFLAGS=$old_CFLAGS
|
|
|
|
|
|
|
|
if test $fail = 1; then
|
|
|
|
AC_MSG_ERROR([You must install the lib]library_name[ library & headers to compile libvirt])
|
|
|
|
else
|
|
|
|
if test "x$with_var" = "xyes" ; then
|
|
|
|
if test "x$libs_var" = 'x' ; then
|
|
|
|
libs_var="-l[]library_name"
|
|
|
|
else
|
|
|
|
libs_var="$libs_var -l[]library_name"
|
|
|
|
fi
|
|
|
|
AC_DEFINE_UNQUOTED(config_var, 1, [whether lib]library_name[ is available])
|
|
|
|
fi
|
|
|
|
|
|
|
|
AM_CONDITIONAL(make_var, [test "x$with_var" = "xyes"])
|
|
|
|
|
|
|
|
AC_SUBST(cflags_var)
|
|
|
|
AC_SUBST(libs_var)
|
|
|
|
fi
|
|
|
|
|
|
|
|
m4_popdef([with_var])
|
|
|
|
m4_popdef([arg_var])
|
|
|
|
m4_popdef([libs_var])
|
|
|
|
m4_popdef([cflags_var])
|
|
|
|
m4_popdef([make_var])
|
|
|
|
m4_popdef([config_var])
|
|
|
|
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_popdef([check_name_dash])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
m4_popdef([check_name_lc])
|
|
|
|
|
|
|
|
m4_popdef([header_name])
|
|
|
|
m4_popdef([function_name])
|
|
|
|
m4_popdef([library_name])
|
|
|
|
m4_popdef([check_name])
|
|
|
|
])
|
|
|
|
|
|
|
|
dnl Probe for existence of libXXXX and set WITH_XXX
|
|
|
|
dnl config header var, WITH_XXXX make conditional and
|
|
|
|
dnl with_XXX configure shell var.
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_CHECK_LIB_ALT([CHECK_NAME], [LIBRARY_NAME],
|
|
|
|
dnl [FUNCTION_NAME], [HEADER_NAME],
|
|
|
|
dnl [CHECK_NAME_ALT, [LIBRARY_NAME_ALT],
|
|
|
|
dnl [FUNCTION_NAME_ALT], [HEADER_NAME_ALT])
|
|
|
|
dnl
|
|
|
|
dnl CHECK_NAME: Suffix/prefix used for variables / flags, in uppercase.
|
|
|
|
dnl Used to set
|
|
|
|
dnl config.h: WITH_XXX macro
|
|
|
|
dnl Makefile: WITH_XXX conditional
|
|
|
|
dnl Makefile: XXX_CFLAGS, XXX_LIBS variables
|
|
|
|
dnl configure: --with-xxx argument
|
|
|
|
dnl configure: with_xxx variable
|
|
|
|
dnl
|
|
|
|
dnl LIBRARY_NAME: base name of library to check for eg libXXX.so
|
|
|
|
dnl FUNCTION_NAME: function to check for in libXXX.so
|
|
|
|
dnl HEADER_NAME: header file to check for
|
|
|
|
dnl
|
|
|
|
dnl CHECK_NAME_ALT: Suffix/prefix used to set additional
|
|
|
|
dnl variables if alternative check succeeds
|
|
|
|
dnl config.h: WITH_XXX macro
|
|
|
|
dnl Makefile: WITH_XXX conditional
|
|
|
|
dnl NB all vars for CHECK_NAME are also set
|
|
|
|
dnl LIBRARY_NAME_ALT: alternative library name to check for
|
|
|
|
dnl FUNCTION_NAME_ALT: alternative function name to check for
|
|
|
|
dnl HEADER_NAME_ALT: alternative header file to check for
|
|
|
|
dnl
|
|
|
|
dnl e.g.
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_CHECK_LIB([YAJL], [yajl],
|
|
|
|
dnl [yajl_parse_complete], [yajl/yajl_common.h],
|
|
|
|
dnl [YAJL2], [yajl],
|
|
|
|
dnl [yajl_tree_parse], [yajl/yajl_common.h])
|
|
|
|
dnl
|
|
|
|
AC_DEFUN([LIBVIRT_CHECK_LIB_ALT],[
|
|
|
|
m4_pushdef([check_name], [$1])
|
|
|
|
m4_pushdef([library_name], [$2])
|
|
|
|
m4_pushdef([function_name], [$3])
|
|
|
|
m4_pushdef([header_name], [$4])
|
|
|
|
m4_pushdef([check_name_alt], [$5])
|
|
|
|
m4_pushdef([library_name_alt], [$6])
|
|
|
|
m4_pushdef([function_name_alt], [$7])
|
|
|
|
m4_pushdef([header_name_alt], [$8])
|
|
|
|
|
|
|
|
m4_pushdef([check_name_lc], m4_tolower(check_name))
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_pushdef([check_name_dash], m4_translit(check_name_lc, [_], [-]))
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
m4_pushdef([config_var], [WITH_]check_name)
|
|
|
|
m4_pushdef([make_var], [WITH_]check_name)
|
|
|
|
m4_pushdef([cflags_var], check_name[_CFLAGS])
|
|
|
|
m4_pushdef([libs_var], check_name[_LIBS])
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_pushdef([arg_var], [with-]check_name_dash)
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
m4_pushdef([with_var], [with_]check_name_lc)
|
|
|
|
m4_pushdef([config_var_alt], [WITH_]check_name_alt)
|
|
|
|
m4_pushdef([make_var_alt], [WITH_]check_name_alt)
|
|
|
|
|
2013-09-06 04:32:25 +08:00
|
|
|
m4_divert_text([DEFAULTS], [with_var][=check])
|
2014-02-26 00:42:29 +08:00
|
|
|
AC_ARG_WITH(check_name_dash,
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
[AS_HELP_STRING([--arg_var],
|
2013-09-06 04:32:25 +08:00
|
|
|
[with lib]]m4_dquote(library_name)[[ support @<:@default=check@:>@])])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
old_LIBS=$LIBS
|
|
|
|
old_CFLAGS=$CFLAGS
|
|
|
|
cflags_var=
|
|
|
|
libs_var=
|
|
|
|
|
|
|
|
fail=0
|
|
|
|
alt=0
|
|
|
|
if test "x$with_var" != "xno" ; then
|
|
|
|
if test "x$with_var" != "xyes" && test "x$with_var" != "xcheck" ; then
|
|
|
|
cflags_var="-I$with_var/include"
|
|
|
|
libs_var="-L$with_var/lib"
|
|
|
|
fi
|
|
|
|
CFLAGS="$CFLAGS $cflags_var"
|
|
|
|
LIBS="$LIBS $libs_var"
|
|
|
|
AC_CHECK_LIB(library_name, function_name, [],[
|
|
|
|
AC_CHECK_LIB(library_name_alt, function_name_alt, [
|
|
|
|
alt=1
|
|
|
|
],[
|
|
|
|
if test "x$with_var" != "xcheck"; then
|
|
|
|
fail=1
|
|
|
|
fi
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=no
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
])
|
|
|
|
])
|
|
|
|
if test "$fail" = "0" && test "x$with_var" != "xno" ; then
|
|
|
|
AC_CHECK_HEADER([header_name], [
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=yes
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
],[
|
|
|
|
AC_CHECK_HEADER([header_name_alt], [
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=yes
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
],[
|
|
|
|
if test "x$with_var" != "xcheck"; then
|
|
|
|
fail=1
|
|
|
|
fi
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=no
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
])
|
|
|
|
])
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
|
|
|
|
LIBS=$old_LIBS
|
|
|
|
CFLAGS=$old_CFLAGS
|
|
|
|
|
|
|
|
if test $fail = 1; then
|
|
|
|
AC_MSG_ERROR([You must install the lib]library_name[ library & headers to compile libvirt])
|
|
|
|
else
|
|
|
|
if test "x$with_var" = "xyes" ; then
|
|
|
|
if test "x$libs_var" = 'x' ; then
|
|
|
|
libs_var="-l[]library_name"
|
|
|
|
else
|
|
|
|
libs_var="$libs_var -l[]library_name"
|
|
|
|
fi
|
|
|
|
|
|
|
|
AC_DEFINE_UNQUOTED(config_var, 1, [whether lib]library_name[ is available])
|
|
|
|
if test "$alt" = "1" ; then
|
|
|
|
AC_DEFINE_UNQUOTED(config_var_alt, 1, [whether lib]library_name[ is available])
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
|
|
|
|
AM_CONDITIONAL(make_var, [test "x$with_var" = "xyes"])
|
|
|
|
AM_CONDITIONAL(make_var_alt, [test "x$with_var" = "xyes" && test "$alt" = "1"])
|
|
|
|
|
|
|
|
AC_SUBST(cflags_var)
|
|
|
|
AC_SUBST(libs_var)
|
|
|
|
fi
|
|
|
|
|
|
|
|
m4_popdef([make_var_alt])
|
|
|
|
m4_popdef([config_var_alt])
|
|
|
|
m4_popdef([with_var])
|
|
|
|
m4_popdef([arg_var])
|
|
|
|
m4_popdef([libs_var])
|
|
|
|
m4_popdef([cflags_var])
|
|
|
|
m4_popdef([make_var])
|
|
|
|
m4_popdef([config_var])
|
|
|
|
|
|
|
|
m4_popdef([check_name_lc])
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_popdef([check_name_dash])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
m4_popdef([header_name_alt])
|
|
|
|
m4_popdef([function_name_alt])
|
|
|
|
m4_popdef([library_name_alt])
|
|
|
|
m4_popdef([header_name])
|
|
|
|
m4_popdef([function_name])
|
|
|
|
m4_popdef([library_name])
|
|
|
|
m4_popdef([check_name])
|
|
|
|
])
|
|
|
|
|
|
|
|
dnl
|
|
|
|
dnl Probe for existence of libXXXX and set WITH_XXX
|
|
|
|
dnl config header var, WITH_XXXX make conditional and
|
|
|
|
dnl with_XXX configure shell var.
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_CHECK_PKG([CHECK_NAME], [PC_NAME], [PC_VERSION])
|
|
|
|
dnl
|
|
|
|
dnl CHECK_NAME: Suffix/prefix used for variables / flags, in uppercase.
|
|
|
|
dnl Used to set
|
|
|
|
dnl config.h: WITH_XXX macro
|
|
|
|
dnl Makefile: WITH_XXX conditional
|
|
|
|
dnl Makefile: XXX_CFLAGS, XXX_LIBS variables
|
|
|
|
dnl configure: --with-xxx argument
|
|
|
|
dnl configure: with_xxx variable
|
|
|
|
dnl PC_NAME: Name of the pkg-config module
|
|
|
|
dnl PC_VERSION: Version of the pkg-config module
|
|
|
|
dnl
|
|
|
|
dnl eg
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_CHECK_PKG([NETCF], [netcf], [0.1.4])
|
|
|
|
dnl
|
|
|
|
AC_DEFUN([LIBVIRT_CHECK_PKG],[
|
|
|
|
m4_pushdef([check_name], [$1])
|
|
|
|
m4_pushdef([pc_name], [$2])
|
|
|
|
m4_pushdef([pc_version], [$3])
|
|
|
|
|
|
|
|
m4_pushdef([check_name_lc], m4_tolower(check_name))
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_pushdef([check_name_dash], m4_translit(check_name_lc, [_], [-]))
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
m4_pushdef([config_var], [WITH_]check_name)
|
|
|
|
m4_pushdef([make_var], [WITH_]check_name)
|
|
|
|
m4_pushdef([cflags_var], check_name[_CFLAGS])
|
|
|
|
m4_pushdef([libs_var], check_name[_LIBS])
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_pushdef([arg_var], [with-]check_name_dash)
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
m4_pushdef([with_var], [with_]check_name_lc)
|
|
|
|
|
2013-09-06 04:32:25 +08:00
|
|
|
m4_divert_text([DEFAULTS], [with_var][=check])
|
2014-02-26 00:42:29 +08:00
|
|
|
AC_ARG_WITH(check_name_dash,
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
[AS_HELP_STRING([--arg_var],
|
2013-09-06 04:32:25 +08:00
|
|
|
[with ]]m4_dquote(pc_name)[[ (>= ]]m4_dquote(pc_version)[[) support @<:@default=check@:>@])])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
fail=0
|
|
|
|
if test "x$with_var" != "xno" ; then
|
|
|
|
PKG_CHECK_MODULES(check_name, pc_name[ >= ]pc_version, [
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=yes
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
],[
|
|
|
|
if test "x$with_var" != "xcheck"; then
|
|
|
|
fail=1
|
|
|
|
fi
|
2013-01-12 02:30:55 +08:00
|
|
|
with_var=no
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
])
|
|
|
|
fi
|
|
|
|
|
|
|
|
if test $fail = 1; then
|
2013-08-08 22:56:59 +08:00
|
|
|
AC_MSG_ERROR([You must install the ]pc_name[ >= ]pc_version[ pkg-config module to compile libvirt])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
fi
|
|
|
|
|
|
|
|
if test "x$with_var" = "xyes" ; then
|
|
|
|
AC_DEFINE_UNQUOTED(config_var, 1, [whether ]pc_name[ >= ]pc_version[ is available])
|
|
|
|
fi
|
|
|
|
|
|
|
|
AM_CONDITIONAL(make_var, [test "x$with_var" = "xyes"])
|
|
|
|
|
|
|
|
m4_popdef([with_var])
|
|
|
|
m4_popdef([arg_var])
|
|
|
|
m4_popdef([libs_var])
|
|
|
|
m4_popdef([cflags_var])
|
|
|
|
m4_popdef([make_var])
|
|
|
|
m4_popdef([config_var])
|
|
|
|
|
|
|
|
m4_popdef([check_name_lc])
|
2014-02-26 00:42:29 +08:00
|
|
|
m4_popdef([check_name_dash])
|
Add some autoconf helper macros for checking for libraries
Most checks for libraries take the same format
* --with-libFOO=yes|no|check|/some/path argument
* check for a function NNN in libFOO.so
* check for a header file DDD/HHH.h
* Define a WITH_FOO config.h symbol
* Define a WITH_FOO make conditional
* Substitute FOO_CFLAGS and FOO_LIBS make variables
* Print CFLAGS & LIBS summary at the end
Doing all this correctly is rather difficult, typically
done by copy+paste of a previous usage. Further small
improvements people make are not applied to all previous
usages.
Improve this by creating some helper macros to apply
good practice. First, to perform the actual checks:
LIBVIRT_CHECK_LIB([SELINUX], [selinux],
[getfilecon], [selinux/selinux.h])
This checks for 'getfilecon' in -lselinux, and the
existence of 'selinux/selinux.h' header file. If successful
it sets SELINUX_CFLAGS and SELINUX_LIBS. The WITH_SELINUX
config.h macro and WITH_SELINUX make conditional are also
defined.
In some cases we need to check two variants of the same
library
LIBVIRT_CHECK_LIB_ALT([SASL], [sasl2],
[sasl_client_init], [sasl/sasl.h],
[SASL1], [sasl],
[sasl_client_init], [sasl/sasl.h])
This checks for sasl_client_init in libsasl2, and if that
is not found, checks sasl_client_init in libsasl. If the
first check succeeds WITH_SASL is set, while if the second
check succeeds *both* WITH_SASL and WITH_SASL1 are set.
If the library supports pkg-config, then another variant
is available
LIBVIRT_CHECK_PKG([AVAHI], [avahi-client], [0.6.0])
This checks for avahi-client >= 0.6.0 via pkg-config
and sets WITH_AVAHI if found.
Finally to print a summary of CFLAGS & LIBs found (if any):
LIBVIRT_RESULT_LIB([SELINUX])
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-20 01:46:30 +08:00
|
|
|
|
|
|
|
m4_popdef([pc_version])
|
|
|
|
m4_popdef([pc_name])
|
|
|
|
m4_popdef([check_name])
|
|
|
|
])
|
|
|
|
|
|
|
|
dnl
|
|
|
|
dnl To be used after a call to LIBVIRT_CHECK_LIB,
|
|
|
|
dnl LIBVIRT_CHECK_LIB_ALT or LIBVIRT_CHECK_PKG
|
|
|
|
dnl to print the result status
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_RESULT_LIB([CHECK_NAME])
|
|
|
|
dnl
|
|
|
|
dnl CHECK_NAME: Suffix/prefix used for variables / flags, in uppercase.
|
|
|
|
dnl
|
|
|
|
dnl LIBVIRT_RESULT_LIB([SELINUX])
|
|
|
|
dnl
|
|
|
|
AC_DEFUN([LIBVIRT_RESULT_LIB],[
|
|
|
|
m4_pushdef([check_name], [$1])
|
|
|
|
|
|
|
|
m4_pushdef([check_name_lc], m4_tolower(check_name))
|
|
|
|
|
|
|
|
m4_pushdef([cflags_var], check_name[_CFLAGS])
|
|
|
|
m4_pushdef([libs_var], check_name[_LIBS])
|
|
|
|
m4_pushdef([with_var], [with_]check_name_lc)
|
|
|
|
|
|
|
|
LIBVIRT_RESULT(check_name_lc, [$with_var], [CFLAGS='$cflags_var' LIBS='$libs_var'])
|
|
|
|
|
|
|
|
m4_popdef([with_var])
|
|
|
|
m4_popdef([libs_var])
|
|
|
|
m4_popdef([cflags_var])
|
|
|
|
|
|
|
|
m4_popdef([check_name_lc])
|
|
|
|
|
|
|
|
m4_popdef([check_name])
|
|
|
|
])
|