libvirt/configure.ac

2579 lines
84 KiB
Plaintext
Raw Normal View History

2005-11-02 20:50:21 +08:00
dnl Process this file with autoconf to produce a configure script.
dnl Copyright (C) 2005-2013 Red Hat, Inc.
dnl See COPYING.LIB for the License of this software
AC_INIT([libvirt], [1.0.1], [libvir-list@redhat.com], [], [http://libvirt.org])
2008-05-22 23:34:02 +08:00
AC_CONFIG_SRCDIR([src/libvirt.c])
AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_MACRO_DIR([m4])
dnl Make automake keep quiet about wildcards & other GNUmake-isms
AM_INIT_AUTOMAKE([-Wno-portability tar-ustar])
AM_MAINTAINER_MODE([enable])
# Maintainer note - comment this line out if you plan to rerun
# GNULIB_POSIXCHECK testing to see if libvirt should be using more modules.
# Leave it uncommented for normal releases, for faster ./configure.
gl_ASSERT_NO_GNULIB_POSIXCHECK
# Use the silent-rules feature when possible.
m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])
AM_SILENT_RULES([yes])
2005-11-02 20:50:21 +08:00
AC_CANONICAL_HOST
# First extract pieces from the version number string
LIBVIRT_MAJOR_VERSION=`echo $VERSION | awk -F. '{print $1}'`
LIBVIRT_MINOR_VERSION=`echo $VERSION | awk -F. '{print $2}'`
LIBVIRT_MICRO_VERSION=`echo $VERSION | awk -F. '{print $3}'`
LIBVIRT_VERSION=$LIBVIRT_MAJOR_VERSION.$LIBVIRT_MINOR_VERSION.$LIBVIRT_MICRO_VERSION$LIBVIRT_MICRO_VERSION_SUFFIX
LIBVIRT_VERSION_NUMBER=`expr $LIBVIRT_MAJOR_VERSION \* 1000000 + $LIBVIRT_MINOR_VERSION \* 1000 + $LIBVIRT_MICRO_VERSION`
2005-11-02 20:50:21 +08:00
# In libtool terminology we need to figure out:
#
# CURRENT
# The most recent interface number that this library implements.
#
# REVISION
# The implementation number of the CURRENT interface.
#
# AGE
# The difference between the newest and oldest interfaces that this
# library implements.
#
# In other words, the library implements all the interface numbers
# in the range from number `CURRENT - AGE' to `CURRENT'.
#
# Libtool assigns the soname version from `CURRENT - AGE', and we
# don't want that to ever change in libvirt. ie it must always be
# zero, to produce libvirt.so.0.
#
# We would, however, like the libvirt version number reflected
# in the so version'd symlinks, and this is based on AGE.REVISION
# eg libvirt.so.0.AGE.REVISION
#
# Assuming we do ever want to break soname version, this can
# toggled. But seriously, don't ever touch this.
LIBVIRT_SONUM=0
# The following examples show what libtool will do
#
# Input: 0.9.14 -> libvirt.so.0.9.14
# Input: 1.0.0 -> libvirt.so.0.1000.0
# Input: 2.5.8 -> libvirt.so.0.2005.8
#
AGE=`expr $LIBVIRT_MAJOR_VERSION '*' 1000 + $LIBVIRT_MINOR_VERSION`
REVISION=$LIBVIRT_MICRO_VERSION
CURRENT=`expr $LIBVIRT_SONUM + $AGE`
LIBVIRT_VERSION_INFO=$CURRENT:$REVISION:$AGE
2008-05-22 23:34:02 +08:00
AC_SUBST([LIBVIRT_MAJOR_VERSION])
AC_SUBST([LIBVIRT_MINOR_VERSION])
AC_SUBST([LIBVIRT_MICRO_VERSION])
AC_SUBST([LIBVIRT_SONUM])
2008-05-22 23:34:02 +08:00
AC_SUBST([LIBVIRT_VERSION])
AC_SUBST([LIBVIRT_VERSION_INFO])
AC_SUBST([LIBVIRT_VERSION_NUMBER])
2005-11-02 20:50:21 +08:00
AC_ARG_WITH([packager],
[AS_HELP_STRING([--with-packager],
[Extra packager name])],
[],[with_packager=no])
AC_ARG_WITH([packager-version],
[AS_HELP_STRING([--with-packager-version],
[Extra packager version])],
[],[with_packager_version=no])
if test "x$with_packager" != "xno"
then
AC_DEFINE_UNQUOTED([PACKAGER], ["$with_packager"],
[Extra package name])
fi
if test "x$with_packager_version" != "xno"
then
AC_DEFINE_UNQUOTED([PACKAGER_VERSION], ["$with_packager_version"],
[Extra package version])
fi
dnl Required minimum versions of all libs we depend on
LIBXML_REQUIRED="2.6.0"
GNUTLS_REQUIRED="1.0.25"
2007-12-06 02:21:27 +08:00
POLKIT_REQUIRED="0.6"
PARTED_REQUIRED="1.8.0"
DEVMAPPER_REQUIRED=1.0.0
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-08 05:02:18 +08:00
LIBPCAP_REQUIRED="1.0.0"
LIBNL_REQUIRED="1.1"
dnl Checks for C compiler.
AC_PROG_CC
AC_PROG_INSTALL
AC_PROG_CPP
dnl Setting AB_VERSION makes the 'autobuild' lines of configure output
dnl slightly more useful
if test -d $srcdir/.git && git --version >/dev/null 2>&1 ; then
AB_VERSION=`cd $srcdir && git describe --match 'v[[0-9]]*' 2>/dev/null`
fi
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-06 05:31:07 +08:00
gl_EARLY
gl_INIT
AC_TYPE_UID_T
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-06 05:31:07 +08:00
dnl Support building Win32 DLLs (must appear *before* AM_PROG_LIBTOOL)
AC_LIBTOOL_WIN32_DLL
AM_PROG_LIBTOOL
AM_PROG_CC_C_O
AM_PROG_LD
AC_MSG_CHECKING([for how to mark DSO non-deletable at runtime])
LIBVIRT_NODELETE=
`$LD --help 2>&1 | grep -- "-z nodelete" >/dev/null` && \
LIBVIRT_NODELETE="-Wl,-z -Wl,nodelete"
AC_MSG_RESULT([$LIBVIRT_NODELETE])
AC_SUBST([LIBVIRT_NODELETE])
AC_MSG_CHECKING([for how to set DSO symbol versions])
VERSION_SCRIPT_FLAGS=-Wl,--version-script=
`$LD --help 2>&1 | grep -- --version-script >/dev/null` || \
VERSION_SCRIPT_FLAGS="-Wl,-M -Wl,"
AC_MSG_RESULT([$VERSION_SCRIPT_FLAGS])
LIBVIRT_COMPILE_WARNINGS
LIBVIRT_CHECK_APPARMOR
LIBVIRT_CHECK_ATTR
LIBVIRT_CHECK_AUDIT
LIBVIRT_CHECK_AVAHI
LIBVIRT_CHECK_BLKID
LIBVIRT_CHECK_CAPNG
LIBVIRT_CHECK_CURL
LIBVIRT_CHECK_DBUS
LIBVIRT_CHECK_FUSE
LIBVIRT_CHECK_HAL
LIBVIRT_CHECK_NETCF
LIBVIRT_CHECK_NUMACTL
LIBVIRT_CHECK_OPENWSMAN
LIBVIRT_CHECK_PCIACCESS
LIBVIRT_CHECK_SANLOCK
LIBVIRT_CHECK_SASL
LIBVIRT_CHECK_SELINUX
LIBVIRT_CHECK_SSH2
LIBVIRT_CHECK_UDEV
LIBVIRT_CHECK_YAJL
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 23:02:11 +08:00
AC_MSG_CHECKING([for CPUID instruction])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 23:02:11 +08:00
[[
#include <stdint.h>
]],
[[
uint32_t eax, ebx, ecx, edx;
asm volatile (
"cpuid"
: "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
: "a" (eax));
]])],
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 23:02:11 +08:00
[have_cpuid=yes],
[have_cpuid=no])
if test "x$have_cpuid" = xyes; then
AC_DEFINE_UNQUOTED([HAVE_CPUID], 1, [whether CPUID instruction is supported])
fi
AC_MSG_RESULT([$have_cpuid])
AC_CHECK_SIZEOF([long])
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 23:02:11 +08:00
dnl Availability of various common functions (non-fatal if missing),
dnl and various less common threadsafe functions
AC_CHECK_FUNCS_ONCE([cfmakeraw geteuid getgid getgrnam_r getmntent_r \
getpwuid_r getuid initgroups kill mmap newlocale posix_fallocate \
posix_memalign regexec sched_getaffinity setns])
dnl Availability of pthread functions (if missing, win32 threading is
dnl assumed). Because of $LIB_PTHREAD, we cannot use AC_CHECK_FUNCS_ONCE.
dnl LIB_PTHREAD and LIBMULTITHREAD were set during gl_INIT by gnulib.
old_LIBS=$LIBS
LIBS="$LIBS $LIB_PTHREAD $LIBMULTITHREAD"
AC_CHECK_FUNCS([pthread_mutexattr_init])
LIBS=$old_libs
dnl Availability of various common headers (non-fatal if missing).
AC_CHECK_HEADERS([pwd.h paths.h regex.h sys/un.h \
sys/poll.h syslog.h mntent.h net/ethernet.h linux/magic.h \
sys/un.h sys/syscall.h netinet/tcp.h ifaddrs.h libtasn1.h \
sys/ucred.h])
dnl Check whether endian provides handy macros.
AC_CHECK_DECLS([htole64], [], [], [[#include <endian.h>]])
dnl We need to decide at configure time if libvirt will use real atomic
dnl operations ("lock free") or emulated ones with a mutex.
dnl Note that the atomic ops are only available with GCC on x86 when
dnl using -march=i486 or higher. If we detect that the atomic ops are
dnl not available but would be available given the right flags, we want
dnl to abort and advise the user to fix their CFLAGS. It's better to do
dnl that then to silently fall back on emulated atomic ops just because
dnl the user had the wrong build environment.
atomic_ops=
AC_MSG_CHECKING([for atomic ops implementation])
AC_TRY_COMPILE([], [__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4;],[
atomic_ops=gcc
],[])
if test "$atomic_ops" = "" ; then
SAVE_CFLAGS="${CFLAGS}"
CFLAGS="-march=i486"
AC_TRY_COMPILE([],
[__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4;],
[AC_MSG_ERROR([Libvirt must be built with -march=i486 or later.])],
[])
CFLAGS="${SAVE_CFLAGS}"
case "$host" in
*-*-mingw* | *-*-msvc* )
atomic_ops=win32
;;
*)
if test "$ac_cv_header_pthread_h" = "yes" ; then
atomic_ops=pthread
else
AC_MSG_ERROR([Libvirt must be built with GCC or have pthread.h on non-Win32 platforms])
fi
;;
esac
fi
case "$atomic_ops" in
gcc)
AC_DEFINE([VIR_ATOMIC_OPS_GCC],[1],[Use GCC atomic ops])
;;
win32)
AC_DEFINE([VIR_ATOMIC_OPS_WIN32],[1],[Use Win32 atomic ops])
;;
pthread)
AC_DEFINE([VIR_ATOMIC_OPS_PTHREAD],[1],[Use pthread atomic ops emulation])
;;
esac
AM_CONDITIONAL([WITH_ATOMIC_OPS_PTHREAD],[test "$atomic_ops" = "pthread"])
AC_MSG_RESULT([$atomic_ops])
AC_CHECK_TYPE([struct ifreq],
[AC_DEFINE([HAVE_STRUCT_IFREQ],[1],
[Defined if struct ifreq exists in net/if.h])],
[], [[#include <sys/socket.h>
#include <net/if.h>
]])
dnl Our only use of libtasn1.h is in the testsuite, and can be skipped
dnl if the header is not present. Assume -ltasn1 is present if the
dnl header could be found.
AM_CONDITIONAL([HAVE_LIBTASN1], [test "x$ac_cv_header_libtasn1_h" = "xyes"])
2008-09-05 20:03:45 +08:00
AC_CHECK_LIB([intl],[gettext],[])
dnl Do we have rpcgen?
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([RPCGEN], [rpcgen], [no])
AM_CONDITIONAL([HAVE_RPCGEN], [test "x$ac_cv_path_RPCGEN" != "xno"])
dnl Is this GLIBC's buggy rpcgen?
AM_CONDITIONAL([HAVE_GLIBC_RPCGEN],
[test "x$ac_cv_path_RPCGEN" != "xno" &&
$ac_cv_path_RPCGEN -t </dev/null >/dev/null 2>&1])
dnl Miscellaneous external programs.
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([XMLLINT], [xmllint], [/usr/bin/xmllint])
AC_PATH_PROG([XMLCATALOG], [xmlcatalog], [/usr/bin/xmlcatalog])
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([XSLTPROC], [xsltproc], [/usr/bin/xsltproc])
AC_PATH_PROG([AUGPARSE], [augparse], [/usr/bin/augparse])
AC_PROG_MKDIR_P
dnl External programs that we can use if they are available.
dnl We will hard-code paths to these programs unless we cannot
dnl detect them, in which case we'll search for the program
dnl along the $PATH at runtime and fail if it's not there.
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([DNSMASQ], [dnsmasq], [dnsmasq],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([RADVD], [radvd], [radvd],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([BRCTL], [brctl], [brctl],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([TC], [tc], [tc],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([UDEVADM], [udevadm], [],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([UDEVSETTLE], [udevsettle], [],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([MODPROBE], [modprobe], [modprobe],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([OVSVSCTL], [ovs-vsctl], [ovs-vsctl],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_PATH_PROG([SCRUB], [scrub], [scrub],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
AC_DEFINE_UNQUOTED([DNSMASQ],["$DNSMASQ"],
[Location or name of the dnsmasq program])
AC_DEFINE_UNQUOTED([RADVD],["$RADVD"],
[Location or name of the radvd program])
AC_DEFINE_UNQUOTED([TC],["$TC"],
[Location or name of the tc profram (see iproute2)])
AC_DEFINE_UNQUOTED([OVSVSCTL],["$OVSVSCTL"],
[Location or name of the ovs-vsctl program])
if test -n "$UDEVADM"; then
AC_DEFINE_UNQUOTED([UDEVADM],["$UDEVADM"],
[Location or name of the udevadm program])
fi
if test -n "$UDEVSETTLE"; then
AC_DEFINE_UNQUOTED([UDEVSETTLE],["$UDEVSETTLE"],
[Location or name of the udevsettle program])
fi
if test -n "$MODPROBE"; then
AC_DEFINE_UNQUOTED([MODPROBE],["$MODPROBE"],
[Location or name of the modprobe program])
fi
AC_DEFINE_UNQUOTED([SCRUB],["$SCRUB"],
[Location or name of the scrub program (for wiping algorithms)])
dnl Specific dir for HTML output ?
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([html-dir], [AC_HELP_STRING([--with-html-dir=path],
[path to base html directory, default $datadir/doc/html])],
[HTML_DIR=$withval], [HTML_DIR='$(datadir)/doc'])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([html-subdir], [AC_HELP_STRING([--with-html-subdir=path],
[directory used under html-dir, default $PACKAGE-$VERSION/html])],
[test "x$withval" != "x" && HTML_DIR="$HTML_DIR/$withval"],
[HTML_DIR="$HTML_DIR/\$(PACKAGE)-\$(VERSION)/html"])
2008-05-22 23:34:02 +08:00
AC_SUBST([HTML_DIR])
dnl Specific XML catalog file for validation of generated html
AC_ARG_WITH([xml-catalog-file],
[AC_HELP_STRING([--with-xml-catalog-file=path],
[path to XML catalog file for validating
generated html, default /etc/xml/catalog])],
[XML_CATALOG_FILE=$withval],
[XML_CATALOG_FILE='/etc/xml/catalog'])
AC_SUBST([XML_CATALOG_FILE])
dnl if --prefix is /usr, don't use /usr/var for localstatedir
dnl or /usr/etc for sysconfdir
dnl as this makes a lot of things break in testing situations
if test "$prefix" = "/usr" && test "$localstatedir" = '${prefix}/var' ; then
localstatedir='/var'
fi
if test "$prefix" = "/usr" && test "$sysconfdir" = '${prefix}/etc' ; then
sysconfdir='/etc'
fi
dnl Make some notes about which OS we're compiling for, as the lxc and qemu
dnl drivers require linux headers, and storage_mpath, dtrace, and nwfilter
dnl are also linux specific. The "network" and storage_fs drivers are known
dnl to not work on MacOS X presently, so we also make a note if compiling
dnl for that
with_linux=no with_osx=no with_freebsd=no
case $host in
*-*-linux*) with_linux=yes ;;
*-*-darwin*) with_osx=yes ;;
*-*-freebsd*) with_freebsd=yes ;;
esac
if test $with_linux = no; then
if test "x$with_lxc" != xyes
then
with_lxc=no
fi
with_dtrace=no
fi
if test $with_freebsd = yes; then
with_firewalld=no
fi
if test $with_osx = yes; then
with_qemu=no
fi
AM_CONDITIONAL([WITH_LINUX], [test "$with_linux" = "yes"])
AM_CONDITIONAL([WITH_FREEBSD], [test "$with_freebsd" = "yes"])
dnl Allow to build without Xen, QEMU/KVM, test or remote driver
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([xen],
AC_HELP_STRING([--with-xen], [add XEN support @<:@default=check@:>@]),[],[with_xen=check])
AC_ARG_WITH([xen-inotify],
AC_HELP_STRING([--with-xen-inotify], [add XEN inotify support @<:@default=check@:>@]),[],[with_xen_inotify=check])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([qemu],
AC_HELP_STRING([--with-qemu], [add QEMU/KVM support @<:@default=yes@:>@]),[],[with_qemu=yes])
2008-11-20 00:58:23 +08:00
AC_ARG_WITH([uml],
AC_HELP_STRING([--with-uml], [add UML support @<:@default=check@:>@]),[],[with_uml=check])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([openvz],
AC_HELP_STRING([--with-openvz], [add OpenVZ support @<:@default=check@:>@]),[],[with_openvz=check])
AC_ARG_WITH([vmware],
AC_HELP_STRING([--with-vmware], [add VMware support @<:@default=yes@:>@]),[],[with_vmware=yes])
AC_ARG_WITH([phyp],
AC_HELP_STRING([--with-phyp], [add PHYP support @<:@default=check@:>@]),[],[with_phyp=check])
AC_ARG_WITH([xenapi],
AC_HELP_STRING([--with-xenapi], [add XenAPI support @<:@default=check@:>@]),[],[with_xenapi=check])
AC_ARG_WITH([libxl],
AC_HELP_STRING([--with-libxl], [add libxenlight support @<:@default=check@:>@]),[],[with_libxl=check])
AC_ARG_WITH([vbox],
AC_HELP_STRING([--with-vbox=@<:@PFX@:>@],
[VirtualBox XPCOMC location @<:@default=yes@:>@]),[],
[with_vbox=yes])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([lxc],
AC_HELP_STRING([--with-lxc], [add Linux Container support @<:@default=check@:>@]),[],[with_lxc=check])
AC_ARG_WITH([esx],
AC_HELP_STRING([--with-esx], [add ESX support @<:@default=check@:>@]),[],[with_esx=check])
AC_ARG_WITH([hyperv],
AC_HELP_STRING([--with-hyperv], [add Hyper-V support @<:@default=check@:>@]),[],[with_hyperv=check])
AC_ARG_WITH([parallels],
AC_HELP_STRING([--with-parallels], [add Parallels Cloud Server support @<:@default=check@:>@]),[],[with_parallels=check])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([test],
AC_HELP_STRING([--with-test], [add test driver support @<:@default=yes@:>@]),[],[with_test=yes])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([remote],
AC_HELP_STRING([--with-remote], [add remote driver support @<:@default=yes@:>@]),[],[with_remote=yes])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([libvirtd],
AC_HELP_STRING([--with-libvirtd], [add libvirtd support @<:@default=yes@:>@]),[],[with_libvirtd=yes])
AC_ARG_WITH([chrdev-lock-files],
AC_HELP_STRING([--with-chrdev-lock-files],
[location for UUCP style lock files for character devices
(use auto for default paths on some platforms)
@<:@default=auto@:>@]),
[],[with_chrdev_lock_files=auto])
dnl
dnl in case someone want to build static binaries
dnl STATIC_BINARIES="-static"
dnl
STATIC_BINARIES=
2008-05-22 23:34:02 +08:00
AC_SUBST([STATIC_BINARIES])
dnl --enable-debug=(yes|no)
2008-05-22 23:34:02 +08:00
AC_ARG_ENABLE([debug],
[AC_HELP_STRING([--enable-debug=@<:@no|yes@:>@],
[enable debugging output @<:@default=yes@:>@])],[],[enable_debug=yes])
AM_CONDITIONAL([ENABLE_DEBUG], test x"$enable_debug" = x"yes")
if test x"$enable_debug" = x"yes"; then
2008-05-22 23:34:02 +08:00
AC_DEFINE([ENABLE_DEBUG], [], [whether debugging is enabled])
fi
dnl
dnl init script flavor
dnl
AC_MSG_CHECKING([for init script flavor])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([init-script],
[AC_HELP_STRING([--with-init-script@<:@=STYLE@:>@],
[Style of init script to install: redhat, systemd, systemd+redhat,
upstart, check, none @<:@default=check@:>@])],[],[with_init_script=check])
init_redhat=no
init_systemd=no
init_upstart=no
case "$with_init_script" in
systemd+redhat)
init_redhat=yes
init_systemd=yes
;;
systemd)
init_systemd=yes
;;
upstart)
init_upstart=yes
;;
redhat)
init_redhat=yes
;;
none)
;;
check)
if test "$cross_compiling" != yes && test -f /etc/redhat-release; then
init_redhat=yes
with_init_script=redhat
fi
;;
*)
AC_MSG_ERROR([Unknown initscript flavour $with_init_script])
;;
esac
AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_RED_HAT], test "$init_redhat" = "yes")
AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_UPSTART], test "$init_upstart" = "yes")
AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_SYSTEMD], test "$init_systemd" = "yes")
AC_MSG_RESULT($with_init_script)
AC_MSG_CHECKING([for whether to install sysctl config])
AC_ARG_WITH([sysctl],
[AC_HELP_STRING([--with-sysctl@<:@=yes/no@:>@],
[Whether to install sysctl configs @<:@default=check@:>@])],
[],[with_sysctl=check])
if test "$with_sysctl" = "yes" || test "$with_sysctl" = "check"
then
case $host in
*-*-linux*)
with_sysctl=yes
;;
**)
if test "$with_sysctl" = "yes"; then
AC_MSG_ERROR([No sysctl configuration supported for $host])
else
with_sysctl=no
fi
;;
esac
fi
AM_CONDITIONAL([WITH_SYSCTL], test "$with_sysctl" = "yes")
AC_MSG_RESULT($with_sysctl)
dnl RHEL-5 has a peculiar version of Xen, which requires some special casing
AC_ARG_WITH([rhel5-api],
[AC_HELP_STRING([--with-rhel5-api=@<:@ARG@:>@],
[build for the RHEL-5 API @<:@default=no@:>@])])
if test x"$with_rhel5_api" = x"yes"; then
AC_DEFINE([WITH_RHEL5_API], [1], [whether building for the RHEL-5 API])
fi
AC_PATH_PROG([IP_PATH], [ip], /sbin/ip, [/usr/sbin:$PATH])
AC_DEFINE_UNQUOTED([IP_PATH], "$IP_PATH", [path to ip binary])
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([IPTABLES_PATH], [iptables], /sbin/iptables, [/usr/sbin:$PATH])
AC_DEFINE_UNQUOTED([IPTABLES_PATH], "$IPTABLES_PATH", [path to iptables binary])
AC_PATH_PROG([IP6TABLES_PATH], [ip6tables], /sbin/ip6tables, [/usr/sbin:$PATH])
AC_DEFINE_UNQUOTED([IP6TABLES_PATH], "$IP6TABLES_PATH", [path to ip6tables binary])
AC_PATH_PROG([EBTABLES_PATH], [ebtables], /sbin/ebtables, [/usr/sbin:$PATH])
AC_DEFINE_UNQUOTED([EBTABLES_PATH], "$EBTABLES_PATH", [path to ebtables binary])
dnl
dnl Checks for the OpenVZ driver
dnl
if test "$with_openvz" = "check"; then
with_openvz=$with_linux
fi
if test "$with_openvz" = "yes" && test "$with_linux" = "no"; then
AC_MSG_ERROR([The OpenVZ driver can be enabled on Linux only.])
fi
if test "$with_openvz" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_OPENVZ], 1, [whether OpenVZ driver is enabled])
fi
AM_CONDITIONAL([WITH_OPENVZ], [test "$with_openvz" = "yes"])
dnl
dnl Checks for the VMware Workstation/Player driver
dnl
if test "$with_vmware" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_VMWARE], 1, [whether VMware driver is enabled])
fi
AM_CONDITIONAL([WITH_VMWARE], [test "$with_vmware" = "yes"])
dnl
dnl check for XDR
dnl
if test x"$with_remote" = x"yes" || test x"$with_libvirtd" = x"yes"; then
dnl Where are the XDR functions?
dnl If portablexdr is installed, prefer that.
dnl Otherwise try -lrpc (Cygwin) -lxdr (some MinGW), -lnsl (Solaris)
fix xdr detection and use with recent glibc glibc 2.13.90 has obsoleted its rpc implementation in favour of the one provided by the TI-RPC library: > * The RPC implementation in libc is obsoleted. Old programs keep working > but new programs cannot be linked with the routines in libc anymore. > Programs in need of RPC functionality must be linked against TI-RPC. > The TI-RPC implemtation is IPv6 enabled and there are other benefits. > > Visible changes of this change include (obviously) the inability to > link > programs using RPC functions without referencing the TI-RPC library, > the > removal of the RPC headers from the glibc headers, and the lack of > symbols defined in <rpc/netdb.h> when <netdb.h> is installed. > Implemented by Ulrich Drepper. (from glibc NEWS) Thus with recent glibc, we need to try linking with -ltirpc when looking for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able to find the XDR headers stored in /usr/include/tirpc. When using TI-RPC, there are some warnings about redundant declarations, but the fix probably belongs in other modules: /usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of 'setrpcent' [-Wredundant-decls] /usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent' was here /usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of 'endrpcent' [-Wredundant-decls] /usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent' was here /usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of 'bindresvport' [-Wredundant-decls] /usr/include/netinet/in.h:440:12: note: previous declaration of 'bindresvport' was here
2011-05-10 23:42:06 +08:00
dnl -ltirpc (glibc 2.13.90 or newer) or none (most Unix)
AC_CHECK_LIB([portablexdr],[xdrmem_create],[],[
fix xdr detection and use with recent glibc glibc 2.13.90 has obsoleted its rpc implementation in favour of the one provided by the TI-RPC library: > * The RPC implementation in libc is obsoleted. Old programs keep working > but new programs cannot be linked with the routines in libc anymore. > Programs in need of RPC functionality must be linked against TI-RPC. > The TI-RPC implemtation is IPv6 enabled and there are other benefits. > > Visible changes of this change include (obviously) the inability to > link > programs using RPC functions without referencing the TI-RPC library, > the > removal of the RPC headers from the glibc headers, and the lack of > symbols defined in <rpc/netdb.h> when <netdb.h> is installed. > Implemented by Ulrich Drepper. (from glibc NEWS) Thus with recent glibc, we need to try linking with -ltirpc when looking for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able to find the XDR headers stored in /usr/include/tirpc. When using TI-RPC, there are some warnings about redundant declarations, but the fix probably belongs in other modules: /usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of 'setrpcent' [-Wredundant-decls] /usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent' was here /usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of 'endrpcent' [-Wredundant-decls] /usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent' was here /usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of 'bindresvport' [-Wredundant-decls] /usr/include/netinet/in.h:440:12: note: previous declaration of 'bindresvport' was here
2011-05-10 23:42:06 +08:00
AC_SEARCH_LIBS([xdrmem_create],[rpc xdr nsl tirpc],[],
[AC_MSG_ERROR([Cannot find a XDR library])])
])
dnl check for cygwin's variation in xdr function names
AC_CHECK_FUNCS([xdr_u_int64_t],[],[],[#include <rpc/xdr.h>])
fix xdr detection and use with recent glibc glibc 2.13.90 has obsoleted its rpc implementation in favour of the one provided by the TI-RPC library: > * The RPC implementation in libc is obsoleted. Old programs keep working > but new programs cannot be linked with the routines in libc anymore. > Programs in need of RPC functionality must be linked against TI-RPC. > The TI-RPC implemtation is IPv6 enabled and there are other benefits. > > Visible changes of this change include (obviously) the inability to > link > programs using RPC functions without referencing the TI-RPC library, > the > removal of the RPC headers from the glibc headers, and the lack of > symbols defined in <rpc/netdb.h> when <netdb.h> is installed. > Implemented by Ulrich Drepper. (from glibc NEWS) Thus with recent glibc, we need to try linking with -ltirpc when looking for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able to find the XDR headers stored in /usr/include/tirpc. When using TI-RPC, there are some warnings about redundant declarations, but the fix probably belongs in other modules: /usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of 'setrpcent' [-Wredundant-decls] /usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent' was here /usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of 'endrpcent' [-Wredundant-decls] /usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent' was here /usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of 'bindresvport' [-Wredundant-decls] /usr/include/netinet/in.h:440:12: note: previous declaration of 'bindresvport' was here
2011-05-10 23:42:06 +08:00
dnl Cygwin/recent glibc requires -I/usr/include/tirpc for <rpc/rpc.h>
old_CFLAGS=$CFLAGS
AC_CACHE_CHECK([where to find <rpc/rpc.h>], [lv_cv_xdr_cflags], [
for add_CFLAGS in '' '-I/usr/include/tirpc' 'missing'; do
if test x"$add_CFLAGS" = xmissing; then
lv_cv_xdr_cflags=missing; break
fi
CFLAGS="$old_CFLAGS $add_CFLAGS"
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <rpc/rpc.h>
]])], [lv_cv_xdr_cflags=${add_CFLAGS:-none}; break])
done
])
CFLAGS=$old_CFLAGS
case $lv_cv_xdr_cflags in
none) XDR_CFLAGS= ;;
missing) AC_MSG_ERROR([Unable to find <rpc/rpc.h>]) ;;
*) XDR_CFLAGS=$lv_cv_xdr_cflags ;;
esac
AC_SUBST([XDR_CFLAGS])
fi
dnl
dnl check for libdl
dnl
dlfcn_found=yes
dlopen_found=yes
AC_CHECK_HEADER([dlfcn.h],, [dlfcn_found=no])
AC_SEARCH_LIBS([dlopen], [dl],, [dlopen_found=no])
case $ac_cv_search_dlopen:$host_os in
'none required'* | *:mingw* | *:msvc*) DLOPEN_LIBS= ;;
no*) AC_MSG_ERROR([Unable to find dlopen()]) ;;
*) if test "x$dlfcn_found" != "xyes"; then
AC_MSG_ERROR([Unable to find dlfcn.h])
fi
DLOPEN_LIBS=$ac_cv_search_dlopen ;;
esac
AC_SUBST([DLOPEN_LIBS])
dnl
dnl check for VirtualBox XPCOMC location
dnl
vbox_xpcomc_dir=
if test "x$with_vbox" != "xyes" && test "x$with_vbox" != "xno"; then
# intentionally don't do any further checks here on the provided path
vbox_xpcomc_dir=$with_vbox
with_vbox=yes
fi
AC_DEFINE_UNQUOTED([VBOX_XPCOMC_DIR], ["$vbox_xpcomc_dir"],
[Location of directory containing VirtualBox XPCOMC library])
if test "x$with_vbox" = "xyes"; then
AC_DEFINE_UNQUOTED([WITH_VBOX], 1, [whether VirtualBox driver is enabled])
fi
AM_CONDITIONAL([WITH_VBOX], [test "$with_vbox" = "yes"])
if test "$with_libvirtd" = "no" ; then
with_qemu=no
fi
2007-09-19 07:36:30 +08:00
if test "$with_qemu" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_QEMU], 1, [whether QEMU driver is enabled])
fi
AM_CONDITIONAL([WITH_QEMU], [test "$with_qemu" = "yes"])
2007-09-19 07:36:30 +08:00
if test "$with_test" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_TEST], 1, [whether Test driver is enabled])
fi
AM_CONDITIONAL([WITH_TEST], [test "$with_test" = "yes"])
2007-09-19 07:36:30 +08:00
if test "$with_remote" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_REMOTE], 1, [whether Remote driver is enabled])
fi
AM_CONDITIONAL([WITH_REMOTE], [test "$with_remote" = "yes"])
if test "$with_libvirtd" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_LIBVIRTD], 1, [whether libvirtd daemon is enabled])
fi
AM_CONDITIONAL([WITH_LIBVIRTD], [test "$with_libvirtd" = "yes"])
old_LIBS="$LIBS"
old_CFLAGS="$CFLAGS"
LIBXENSERVER_LIBS=""
LIBXENSERVER_CFLAGS=""
dnl search for the XenServer library
fail=0
if test "$with_xenapi" != "no" ; then
if test "$with_xenapi" != "yes" && test "$with_xenapi" != "check" ; then
LIBXENSERVER_CFLAGS="-I$with_xenapi/include"
LIBXENSERVER_LIBS="-L$with_xenapi"
fi
CFLAGS="$CFLAGS $LIBXENSERVER_CFLAGS"
LIBS="$LIBS $LIBXENSERVER_LIBS"
AC_CHECK_LIB([xenserver], [xen_vm_start], [
LIBXENSERVER_LIBS="$LIBXENSERVER_LIBS -lxenserver"
],[
if test "$with_xenapi" = "yes"; then
fail=1
fi
with_xenapi=no
])
if test "$with_xenapi" != "no" ; then
if test "$with_curl" = "no"; then
if test "$with_xenapi" = "yes"; then
fail=1
fi
with_xenapi=no
else
with_xenapi=yes
fi
fi
fi
LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"
if test $fail = 1; then
AC_MSG_ERROR([You must install libxenserver and libcurl to compile the XenAPI driver])
fi
if test "$with_xenapi" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_XENAPI], 1, [whether XenAPI driver is enabled])
fi
AC_SUBST([LIBXENSERVER_CFLAGS])
AC_SUBST([LIBXENSERVER_LIBS])
old_LIBS="$LIBS"
old_CFLAGS="$CFLAGS"
LIBXL_LIBS=""
LIBXL_CFLAGS=""
dnl search for libxl, aka libxenlight
fail=0
if test "$with_libxl" != "no" ; then
if test "$with_libxl" != "yes" && test "$with_libxl" != "check" ; then
LIBXL_CFLAGS="-I$with_libxl/include"
LIBXL_LIBS="-L$with_libxl"
fi
CFLAGS="$CFLAGS $LIBXL_CFLAGS"
LIBS="$LIBS $LIBXL_LIBS"
AC_CHECK_LIB([xenlight], [libxl_ctx_alloc], [
with_libxl=yes
LIBXL_LIBS="$LIBXL_LIBS -lxenlight -lxenctrl"
],[
if test "$with_libxl" = "yes"; then
fail=1
fi
with_libxl=no
])
fi
LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"
if test $fail = 1; then
AC_MSG_ERROR([You must install the libxl Library from Xen >= 4.2 to compile libxenlight driver with -lxl])
fi
if test "$with_libxl" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_LIBXL], 1, [whether libxenlight driver is enabled])
fi
AM_CONDITIONAL([WITH_LIBXL], [test "$with_libxl" = "yes"])
AC_SUBST([LIBXL_CFLAGS])
AC_SUBST([LIBXL_LIBS])
old_LIBS="$LIBS"
old_CFLAGS="$CFLAGS"
XEN_LIBS=""
XEN_CFLAGS=""
dnl search for the Xen store library
if test "$with_xen" != "no" ; then
if test "$with_xen" != "yes" && test "$with_xen" != "check" ; then
XEN_CFLAGS="-I$with_xen/include"
XEN_LIBS="-L$with_xen/lib64 -L$with_xen/lib"
fi
fail=0
CFLAGS="$CFLAGS $XEN_CFLAGS"
LIBS="$LIBS $XEN_LIBS"
AC_CHECK_LIB([xenstore], [xs_read], [
with_xen=yes
XEN_LIBS="$XEN_LIBS -lxenstore"
],[
if test "$with_xen" = "yes"; then
fail=1
fi
with_xen=no
])
fi
if test "$with_xen" != "no" ; then
dnl In Xen 4.2, xs.h is deprecated in favor of xenstore.h.
AC_CHECK_HEADERS([xenstore.h])
2008-05-22 23:34:02 +08:00
AC_CHECK_HEADERS([xen/xen.h xen/version.h xen/dom0_ops.h],,[
if test "$with_xen" = "yes"; then
fail=1
fi
with_xen=no
],
[#include <stdio.h>
#include <stdint.h>
])
fi
if test "$with_xen" != "no" ; then
dnl Search for the location of <xen/{linux,sys}/privcmd.h>.
found=
AC_CHECK_HEADERS([xen/sys/privcmd.h xen/linux/privcmd.h], [found=yes; break;], [],
[#include <stdio.h>
#include <stdint.h>
#include <xen/xen.h>
])
if test "x$found" != "xyes"; then
if test "$with_xen" = "yes"; then
fail=1
fi
with_xen=no
fi
fi
LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"
if test $fail = 1; then
AC_MSG_ERROR([You must install the Xen development package to compile Xen driver with -lxenstore])
fi
if test "$with_xen" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_XEN], 1, [whether Xen driver is enabled])
fi
AM_CONDITIONAL([WITH_XEN], [test "$with_xen" = "yes"])
AC_SUBST([XEN_CFLAGS])
AC_SUBST([XEN_LIBS])
AM_CONDITIONAL([WITH_XENXS], [test "$with_libxl" = "yes" || test "$with_xen" = "yes"])
dnl
dnl check for kernel headers required by xen_inotify
dnl
if test "$with_xen" != "yes"; then
with_xen_inotify=no
fi
if test "$with_xen_inotify" != "no"; then
AC_CHECK_HEADER([sys/inotify.h], [
with_xen_inotify=yes
], [
if test "$with_xen_inotify" = "check"; then
with_xen_inotify=no
AC_MSG_NOTICE([Header file <sys/inotify.h> is required for Xen Inotify support, disabling it])
else
AC_MSG_ERROR([Header file <sys/inotify.h> is required for Xen Inotify support!])
fi
0])
fi
if test "$with_xen_inotify" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_XEN_INOTIFY], 1,[whether Xen inotify sub-driver is enabled])
fi
AM_CONDITIONAL([WITH_XEN_INOTIFY], [test "$with_xen_inotify" = "yes"])
dnl
dnl check for kvm headers
dnl
AC_CHECK_HEADERS([linux/kvm.h])
dnl
dnl check for sufficient headers for LXC
dnl
if test "$with_libvirtd" = "no" ; then
with_lxc=no
fi
if test "$with_lxc" = "yes" || test "$with_lxc" = "check"; then
AC_TRY_LINK([
#include <sched.h>
#include <linux/loop.h>
#include <sys/epoll.h>
], [
unshare (!(LO_FLAGS_AUTOCLEAR + EPOLL_CLOEXEC));
], [
with_lxc=yes
AC_DEFINE([HAVE_DECL_LO_FLAGS_AUTOCLEAR], [1],
[Define to 1 if you have the declaration of `LO_FLAGS_AUTOCLEAR',
and to 0 if you don't.])
], [
if test "$with_lxc" = "check"; then
with_lxc=no
AC_MSG_NOTICE([Required kernel features were not found, disabling LXC])
else
AC_MSG_ERROR([Required kernel features for LXC were not found])
fi
])
fi
if test "$with_lxc" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_LXC], 1, [whether LXC driver is enabled])
fi
AM_CONDITIONAL([WITH_LXC], [test "$with_lxc" = "yes"])
dnl
dnl Checks for the Parallels driver
dnl
if test "$with_parallels" = "check"; then
with_parallels=$with_linux
if test ! $host_cpu = 'x86_64'; then
with_parallels=no
fi
fi
if test "$with_parallels" = "yes" && test "$with_linux" = "no"; then
AC_MSG_ERROR([The Parallels driver can be enabled on Linux only.])
fi
if test "$with_parallels" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_PARALLELS], 1, [whether Parallels driver is enabled])
fi
AM_CONDITIONAL([WITH_PARALLELS], [test "$with_parallels" = "yes"])
dnl
dnl check for shell that understands <> redirection without truncation,
dnl needed by src/qemu/qemu_monitor_{text,json}.c.
dnl
if test "$with_qemu" = yes; then
lv_wrapper_shell=
AC_CACHE_CHECK([for shell that supports <> redirection],
[lv_cv_wrapper_shell],
[
# If cross-compiling, guess that /bin/sh is good enough except for
# Linux, where it might be dash 0.5.5 which is known broken; and on
# Linux, we have a good chance that /bin/bash will exist.
# If we guess wrong, a user can override the cache variable.
# Going through /bin/bash is a slight slowdown if /bin/sh works.
if test "$cross_compiling" = yes; then
case $host_os in
linux*) lv_cv_wrapper_shell=/bin/bash ;;
*) lv_cv_wrapper_shell=/bin/sh ;;
esac
else
for lv_cv_wrapper_shell in /bin/sh bash ksh zsh none; do
test $lv_cv_wrapper_shell = none &&
AC_MSG_ERROR([could not find decent shell])
echo a > conftest.a
($lv_cv_wrapper_shell -c ': 1<>conftest.a') 2>/dev/null &&
case `cat conftest.a`.$lv_cv_wrapper_shell in
a./*) break;; dnl /bin/sh is good enough
a.*) dnl bash, ksh, and zsh all understand 'command', use that
dnl to determine the absolute path of the shell
lv_cv_wrapper_shell=`$lv_cv_wrapper_shell -c \
"command -v $lv_cv_wrapper_shell"`
case $lv_cv_wrapper_shell in
/*) break;;
esac
;;
esac
done
rm -f conftest.a
fi
])
if test "x$lv_cv_wrapper_shell" != x/bin/sh; then
lv_wrapper_shell=$lv_cv_wrapper_shell
fi
if test "x$lv_wrapper_shell" != x; then
AC_DEFINE_UNQUOTED([VIR_WRAPPER_SHELL], ["$lv_wrapper_shell"],
[Define to the absolute path of a shell that does not truncate on
<> redirection, if /bin/sh does not fit the bill])
fi
fi
dnl
dnl check for kernel headers required by src/bridge.c
dnl
if test "$with_linux" = "yes"; then
if test "$with_qemu" = "yes" || test "$with_lxc" = "yes" ; then
AC_CHECK_HEADERS([linux/param.h linux/sockios.h linux/if_bridge.h linux/if_tun.h],,
AC_MSG_ERROR([You must install kernel-headers in order to compile libvirt with QEMU or LXC support]))
fi
fi
dnl Need to test if pkg-config exists
PKG_PROG_PKG_CONFIG
dnl ==========================================================================
dnl find libxml2 library, borrowed from xmlsec
dnl ==========================================================================
LIBXML_CONFIG="xml2-config"
LIBXML_CFLAGS=""
LIBXML_LIBS=""
LIBXML_FOUND="no"
AC_ARG_WITH([libxml], AC_HELP_STRING([--with-libxml=@<:@PFX@:>@], [libxml2 location]))
if test "x$with_libxml" = "xno" ; then
AC_MSG_CHECKING(for libxml2 libraries >= $LIBXML_REQUIRED)
2008-05-22 23:34:02 +08:00
AC_MSG_ERROR([libxml2 >= $LIBXML_REQUIRED is required for libvirt])
elif test "x$with_libxml" = "x" && test "x$PKG_CONFIG" != "x" ; then
PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= $LIBXML_REQUIRED, [LIBXML_FOUND=yes], [LIBXML_FOUND=no])
fi
if test "$LIBXML_FOUND" = "no" ; then
if test "x$with_libxml" != "x" ; then
LIBXML_CONFIG=$with_libxml/bin/$LIBXML_CONFIG
fi
AC_MSG_CHECKING(libxml2 $LIBXML_CONFIG >= $LIBXML_REQUIRED )
if ! $LIBXML_CONFIG --version > /dev/null 2>&1 ; then
2008-05-22 23:34:02 +08:00
AC_MSG_ERROR([Could not find libxml2 anywhere (see config.log for details).])
fi
vers=`$LIBXML_CONFIG --version | awk -F. '{ printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
minvers=`echo $LIBXML_REQUIRED | awk -F. '{ printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
if test "$vers" -ge "$minvers" ; then
LIBXML_LIBS="`$LIBXML_CONFIG --libs`"
LIBXML_CFLAGS="`$LIBXML_CONFIG --cflags`"
LIBXML_FOUND="yes"
AC_MSG_RESULT(yes)
else
AC_MSG_ERROR(
[You need at least libxml2 $LIBXML_REQUIRED for this version of libvirt])
fi
fi
2008-05-22 23:34:02 +08:00
AC_SUBST([LIBXML_CFLAGS])
AC_SUBST([LIBXML_LIBS])
dnl xmlURI structure has query_raw?
old_cflags="$CFLAGS"
old_libs="$LIBS"
CFLAGS="$CFLAGS $LIBXML_CFLAGS"
LIBS="$LIBS $LIBXML_LIBS"
2008-05-22 23:34:02 +08:00
AC_CHECK_MEMBER([struct _xmlURI.query_raw],
[AC_DEFINE([HAVE_XMLURI_QUERY_RAW], [], [Have query_raw field in libxml2 xmlURI structure])],,
[#include <libxml/uri.h>])
CFLAGS="$old_cflags"
LIBS="$old_libs"
dnl GnuTLS library
AC_ARG_WITH([gnutls],
AC_HELP_STRING([--with-gnutls], [use GNUTLS for encryption @<:@default=check@:>@]),
[],
[with_gnutls=check])
if test "x$with_gnutls" != "xno"; then
if test "x$with_gnutls" != "xyes" && test "x$with_gnutls" != "xcheck"; then
GNUTLS_CFLAGS="-I$with_gnutls/include"
GNUTLS_LIBS="-L$with_gnutls/lib"
fi
2008-05-22 23:40:01 +08:00
fail=0
old_cflags="$CFLAGS"
old_libs="$LIBS"
CFLAGS="$CFLAGS $GNUTLS_CFLAGS"
LIBS="$LIBS $GNUTLS_LIBS"
2008-05-22 23:40:01 +08:00
GNUTLS_FOUND=no
if test -x "$PKG_CONFIG" ; then
PKG_CHECK_MODULES(GNUTLS, gnutls >= $GNUTLS_REQUIRED,
[GNUTLS_FOUND=yes], [GNUTLS_FOUND=no])
fi
if test "$GNUTLS_FOUND" = "no"; then
fail=0
AC_CHECK_HEADER([gnutls/gnutls.h], [], [fail=1])
AC_CHECK_LIB([gnutls], [gnutls_handshake],[], [fail=1], [-lgcrypt])
test $fail = 0 && GNUTLS_FOUND=yes
GNUTLS_LIBS="$GNUTLS_LIBS -lgnutls"
fi
if test "$GNUTLS_FOUND" = "no"; then
if test "$with_gnutls" = "check"; then
with_gnutls=no
GNUTLS_LIBS=
GNUTLS_CFLAGS=
else
AC_MSG_ERROR([You must install the GnuTLS library in order to compile and run libvirt])
fi
else
dnl Not all versions of gnutls include -lgcrypt, and so we add
dnl it explicitly for the calls to gcry_control/check_version
GNUTLS_LIBS="$GNUTLS_LIBS -lgcrypt"
with_gnutls=yes
fi
2008-05-22 23:40:01 +08:00
LIBS="$old_libs"
CFLAGS="$old_CFLAGS"
fi
if test "x$with_gnutls" = "xyes" ; then
2013-01-09 05:02:05 +08:00
AC_DEFINE_UNQUOTED([WITH_GNUTLS], 1,
[whether GNUTLS is available for encryption])
fi
2013-01-09 05:02:05 +08:00
AM_CONDITIONAL([WITH_GNUTLS], [test "x$with_gnutls" = "xyes"])
2008-05-22 23:34:02 +08:00
AC_SUBST([GNUTLS_CFLAGS])
AC_SUBST([GNUTLS_LIBS])
2007-12-06 02:21:27 +08:00
dnl PolicyKit library
POLKIT_CFLAGS=
POLKIT_LIBS=
PKCHECK_PATH=
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([polkit],
AC_HELP_STRING([--with-polkit], [use PolicyKit for UNIX socket access checks @<:@default=check@:>@]),
2007-12-06 02:21:27 +08:00
[],
[with_polkit=check])
with_polkit0=no
with_polkit1=no
if test "x$with_polkit" = "xyes" || test "x$with_polkit" = "xcheck"; then
dnl Check for new polkit first - just a binary
AC_PATH_PROG([PKCHECK_PATH],[pkcheck], [], [/usr/sbin:$PATH])
if test "x$PKCHECK_PATH" != "x" ; then
AC_DEFINE_UNQUOTED([PKCHECK_PATH],["$PKCHECK_PATH"],[Location of pkcheck program])
2013-01-09 06:19:00 +08:00
AC_DEFINE_UNQUOTED([WITH_POLKIT], 1,
[use PolicyKit for UNIX socket access checks])
2013-01-09 06:19:00 +08:00
AC_DEFINE_UNQUOTED([WITH_POLKIT1], 1,
[use PolicyKit for UNIX socket access checks])
with_polkit="yes"
with_polkit1="yes"
else
dnl Check for old polkit second - library + binary
PKG_CHECK_MODULES(POLKIT, polkit-dbus >= $POLKIT_REQUIRED,
[with_polkit=yes], [
if test "x$with_polkit" = "xcheck" ; then
with_polkit=no
else
AC_MSG_ERROR(
[You must install PolicyKit >= $POLKIT_REQUIRED to compile libvirt])
fi
])
if test "x$with_polkit" = "xyes" ; then
2013-01-09 06:19:00 +08:00
AC_DEFINE_UNQUOTED([WITH_POLKIT], 1,
[use PolicyKit for UNIX socket access checks])
2013-01-09 06:19:00 +08:00
AC_DEFINE_UNQUOTED([WITH_POLKIT0], 1,
[use PolicyKit for UNIX socket access checks])
old_CFLAGS=$CFLAGS
old_LIBS=$LIBS
CFLAGS="$CFLAGS $POLKIT_CFLAGS"
LIBS="$LIBS $POLKIT_LIBS"
AC_CHECK_FUNCS([polkit_context_is_caller_authorized])
CFLAGS="$old_CFLAGS"
LIBS="$old_LIBS"
AC_PATH_PROG([POLKIT_AUTH], [polkit-auth])
if test "x$POLKIT_AUTH" != "x"; then
AC_DEFINE_UNQUOTED([POLKIT_AUTH],["$POLKIT_AUTH"],[Location of polkit-auth program])
fi
with_polkit0="yes"
fi
fi
2007-12-06 02:21:27 +08:00
fi
2013-01-09 06:19:00 +08:00
AM_CONDITIONAL([WITH_POLKIT], [test "x$with_polkit" = "xyes"])
AM_CONDITIONAL([WITH_POLKIT0], [test "x$with_polkit0" = "xyes"])
AM_CONDITIONAL([WITH_POLKIT1], [test "x$with_polkit1" = "xyes"])
2008-05-22 23:34:02 +08:00
AC_SUBST([POLKIT_CFLAGS])
AC_SUBST([POLKIT_LIBS])
network: use firewalld instead of iptables, when available * configure.ac, spec file: firewalld defaults to enabled if dbus is available, otherwise is disabled. If --with_firewalld is explicitly requested and dbus is not available, configure will fail. * bridge_driver: add dbus filters to get the FirewallD1.Reloaded signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1. When these are encountered, reload all the iptables reuls of all libvirt's virtual networks (similar to what happens when libvirtd is restarted). * iptables, ebtables: use firewall-cmd's direct passthrough interface when available, otherwise use iptables and ebtables commands. This decision is made once the first time libvirt calls iptables/ebtables, and that decision is maintained for the life of libvirtd. * Note that the nwfilter part of this patch was separated out into another patch by Stefan in V2, so that needs to be revised and re-reviewed as well. ================ All the configure.ac and specfile changes are unchanged from Thomas' V3. V3 re-ran "firewall-cmd --state" every time a new rule was added, which was extremely inefficient. V4 uses VIR_ONCE_GLOBAL_INIT to set up a one-time initialization function. The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called vir(Ip|Eb)OnceInit(), which will then be called the first time that the static function vir(Ip|Eb)TablesInitialize() is called (that function is defined for you by the macro). This is thread-safe, so there is no chance of any race. IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init functions (one for iptables, on for ebtables) as VIR_WARN so that I don't have to turn on all the other debug message just to see these. Even if this patch doesn't need any other modification, those messages need to be changed to VIR_DEBUG before pushing. This one-time initialization works well. However, I've encountered problems with testing: 1) Whenever I have enabled the firewalld service, *all* attempts to call firewall-cmd from within libvirtd end with firewall-cmd hanging internally somewhere. This is *not* the case if firewall-cmd returns non-0 in response to "firewall-cmd --state" (i.e. *that* command runs and returns to libvirt successfully.) 2) If I start libvirtd while firewalld is stopped, then start firewalld later, this triggers libvirtd to reload its iptables rules, however it also spits out a *ton* of complaints about deletion failing (I suppose because firewalld has nuked all of libvirt's rules). I guess we need to suppress those messages (which is a more annoying problem to fix than you might think, but that's another story). 3) I noticed a few times during this long line of errors that firewalld made a complaint about "Resource Temporarily unavailable. Having libvirtd access iptables commands directly at the same time as firewalld is doing so is apparently problematic. 4) In general, I'm concerned about the "set it once and never change it" method - if firewalld is disabled at libvirtd startup, causing libvirtd to always use iptables/ebtables directly, this won't cause *terrible* problems, but if libvirtd decides to use firewall-cmd and firewalld is later disabled, libvirtd will not be able to recover.
2012-08-15 02:59:52 +08:00
dnl firewalld
AC_ARG_WITH([firewalld],
AC_HELP_STRING([--with-firewalld], [enable firewalld support @<:@default=check@:>@]),
[],
[with_firewalld=check])
if test "x$with_firewalld" = "xcheck" ; then
with_firewalld=$with_dbus
fi
if test "x$with_firewalld" == "xyes" ; then
if test "x$with_dbus" != "xyes" ; then
AC_MSG_ERROR([You must have dbus enabled for firewalld support])
fi
AC_DEFINE_UNQUOTED([HAVE_FIREWALLD], [1], [whether firewalld support is enabled])
fi
AM_CONDITIONAL([HAVE_FIREWALLD], [test "x$with_firewalld" != "xno"])
dnl UUCP style file locks for character devices
if test "$with_chrdev_lock_files" != "no"; then
case $with_chrdev_lock_files in
yes | auto)
dnl Default locations for platforms, or disable if unknown
if test "$with_linux" = "yes"; then
with_chrdev_lock_files=/var/lock
elif test "$with_chrdev_lock_files" = "auto"; then
with_chrdev_lock_files=no
fi ;;
esac
if test "$with_chrdev_lock_files" = "yes"; then
AC_MSG_ERROR([You must specify path for the lock files on this
platform])
fi
AC_DEFINE_UNQUOTED([VIR_CHRDEV_LOCK_FILE_PATH], "$with_chrdev_lock_files",
[path to directory containing UUCP device lock files])
fi
AM_CONDITIONAL([VIR_CHRDEV_LOCK_FILE_PATH], [test "$with_chrdev_lock_files" != "no"])
AC_ARG_WITH([secdriver-selinux],
AC_HELP_STRING([--with-secdriver-selinux], [use SELinux security driver @<:@default=check@:>@]),
[],
[with_secdriver_selinux=check])
if test "$with_selinux" != "yes" ; then
if test "$with_secdriver_selinux" = "check" ; then
with_secdriver_selinux=no
fi
if test "$with_secdriver_selinux" != "no"; then
AC_MSG_ERROR([You must install the libselinux development package and enable SELinux with the --with-selinux=yes in order to compile libvirt --with-secdriver-selinux=yes])
fi
elif test "$with_secdriver_selinux" != "no"; then
old_cflags="$CFLAGS"
old_libs="$LIBS"
CFLAGS="$CFLAGS $SELINUX_CFLAGS"
LIBS="$CFLAGS $SELINUX_LIBS"
fail=0
AC_CHECK_FUNC([selinux_virtual_domain_context_path], [], [fail=1])
AC_CHECK_FUNC([selinux_virtual_image_context_path], [], [fail=1])
AC_CHECK_FUNCS([selinux_lxc_contexts_path])
CFLAGS="$old_cflags"
LIBS="$old_libs"
if test "$fail" = "1" ; then
if test "$with_secdriver_selinux" = "check" ; then
with_secdriver_selinux=no
else
AC_MSG_ERROR([You must install libselinux development package >= 2.0.82 in order to compile libvirt --with-secdriver-selinux=yes])
fi
else
with_secdriver_selinux=yes
AC_DEFINE_UNQUOTED([WITH_SECDRIVER_SELINUX], 1, [whether SELinux security driver is available])
fi
fi
AM_CONDITIONAL([WITH_SECDRIVER_SELINUX], [test "$with_secdriver_selinux" != "no"])
AC_ARG_WITH([secdriver-apparmor],
AC_HELP_STRING([--with-secdriver-apparmor], [use AppArmor security driver @<:@default=check@:>@]),
[],
[with_secdriver_apparmor=check])
if test "$with_apparmor" != "yes" ; then
if test "$with_secdriver_apparmor" = "check" ; then
with_secdriver_apparmor=no
fi
if test "$with_secdriver_apparmor" != "no" ; then
AC_MSG_ERROR([You must install the AppArmor development package in order to compile libvirt])
fi
elif test "with_secdriver_apparmor" != "no" ; then
with_secdriver_apparmor=yes
AC_DEFINE_UNQUOTED([WITH_SECDRIVER_APPARMOR], 1, [whether AppArmor security driver is available])
fi
AM_CONDITIONAL([WITH_SECDRIVER_APPARMOR], [test "$with_secdriver_apparmor" != "no"])
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-15 00:30:32 +08:00
dnl DTrace static probes
AC_ARG_WITH([dtrace],
AC_HELP_STRING([--with-dtrace], [use dtrace for static probing @<:@default=check@:>@]),
[],
[with_dtrace=check])
if test "$with_dtrace" != "no" ; then
AC_PATH_PROG([DTRACE], [dtrace], [], [/bin:/usr/bin])
if test -z "$DTRACE" ; then
if test "$with_dtrace" = "check"; then
with_dtrace=no
else
AC_MSG_ERROR([You must install the 'dtrace' binary to enable libvirt static probes])
fi
else
with_dtrace=yes
fi
if test "$with_dtrace" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_DTRACE_PROBES], 1, [whether DTrace static probes are available])
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-15 00:30:32 +08:00
fi
fi
AM_CONDITIONAL([WITH_DTRACE_PROBES], [test "$with_dtrace" != "no"])
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-15 00:30:32 +08:00
dnl numad
AC_ARG_WITH([numad],
AC_HELP_STRING([--with-numad], [use numad to manage CPU placement dynamically @<:@default=check@:>@]),
[],
[with_numad=check])
if test "$with_numad" != "no" ; then
fail=0
AC_PATH_PROG([NUMAD], [numad], [], [/bin:/usr/bin])
if test "$with_numad" = "check"; then
test "$with_numactl" = "yes" || fail=1
if test -z "$NUMAD" || test $fail = 1; then
with_numad="no"
else
with_numad="yes"
fi
else
test -z "$NUMAD" &&
AC_MSG_ERROR([You must install numad package to manage CPU and memory placement dynamically])
test "$with_numactl" = "yes" || fail=1
test $fail = 1 &&
AC_MSG_ERROR([You must install the numactl development package in order to compile and run libvirt])
fi
fi
if test "$with_numad" = "yes"; then
AC_DEFINE_UNQUOTED([HAVE_NUMAD], 1, [whether numad is available])
AC_DEFINE_UNQUOTED([NUMAD],["$NUMAD"], [Location or name of the numad program])
fi
AM_CONDITIONAL([HAVE_NUMAD], [test "$with_numad" != "no"])
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-08 05:02:18 +08:00
dnl pcap lib
LIBPCAP_CONFIG="pcap-config"
LIBPCAP_CFLAGS=""
LIBPCAP_LIBS=""
LIBPCAP_FOUND="no"
AC_ARG_WITH([libpcap], AC_HELP_STRING([--with-libpcap=@<:@PFX@:>@], [libpcap location]))
if test "$with_qemu" = "yes"; then
case $with_libpcap in
no) LIBPCAP_CONFIG= ;;
''|yes) LIBPCAP_CONFIG="pcap-config" ;;
*) LIBPCAP_CONFIG="$with_libpcap/bin/pcap-config" ;;
esac
AS_IF([test "x$LIBPCAP_CONFIG" != "x"], [
AC_MSG_CHECKING(libpcap $LIBPCAP_CONFIG >= $LIBPCAP_REQUIRED )
if ! $LIBPCAP_CONFIG --libs > /dev/null 2>&1 ; then
AC_MSG_RESULT(no)
else
LIBPCAP_LIBS="`$LIBPCAP_CONFIG --libs`"
LIBPCAP_CFLAGS="`$LIBPCAP_CONFIG --cflags`"
LIBPCAP_FOUND="yes"
AC_MSG_RESULT(yes)
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-08 05:02:18 +08:00
fi
])
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-08 05:02:18 +08:00
fi
if test "x$LIBPCAP_FOUND" = "xyes"; then
AC_DEFINE_UNQUOTED([HAVE_LIBPCAP], 1, [whether libpcap can be used])
fi
AC_SUBST([LIBPCAP_CFLAGS])
AC_SUBST([LIBPCAP_LIBS])
dnl
dnl Checks for the UML driver
dnl
if test "$with_libvirtd" = "no" ; then
with_uml=no
fi
if test "$with_uml" = "yes" || test "$with_uml" = "check"; then
AC_CHECK_HEADER([sys/inotify.h], [
with_uml=yes
], [
if test "$with_uml" = "check"; then
with_uml=no
AC_MSG_NOTICE([<sys/inotify.h> is required for the UML driver, disabling it])
else
AC_MSG_ERROR([The <sys/inotify.h> is required for the UML driver. Upgrade your libc6.])
fi
])
fi
if test "$with_uml" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_UML], 1, [whether UML driver is enabled])
fi
AM_CONDITIONAL([WITH_UML], [test "$with_uml" = "yes"])
dnl
dnl check for PHYP
dnl
if test "$with_phyp" != "no"; then
if test "$with_ssh2" = "no" ; then
if test "$with_phyp" = "check"; then
with_phyp=no
else
AC_MSG_ERROR([libssh2 is required for Phyp driver])
fi
else
with_phyp=yes
fi
fi
if test "$with_phyp" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_PHYP], 1, [whether IBM HMC / IVM driver is enabled])
fi
AM_CONDITIONAL([WITH_PHYP],[test "$with_phyp" = "yes"])
2005-12-08 18:23:34 +08:00
dnl virsh libraries
AC_CHECK_HEADERS([readline/readline.h])
# Check for readline.
2008-05-22 23:34:02 +08:00
AC_CHECK_LIB([readline], [readline],
[lv_use_readline=yes; VIRSH_LIBS="$VIRSH_LIBS -lreadline"],
[lv_use_readline=no])
# If the above test failed, it may simply be that -lreadline requires
# some termcap-related code, e.g., from one of the following libraries.
# See if adding one of them to LIBS helps.
if test $lv_use_readline = no; then
lv_saved_libs=$LIBS
LIBS=
2008-05-22 23:34:02 +08:00
AC_SEARCH_LIBS([tgetent], [ncurses curses termcap termlib])
case $LIBS in
no*) ;; # handle "no" and "none required"
*) # anything else is a -lLIBRARY
# Now, check for -lreadline again, also using $LIBS.
# Note: this time we use a different function, so that
# we don't get a cached "no" result.
2008-05-22 23:34:02 +08:00
AC_CHECK_LIB([readline], [rl_initialize],
[lv_use_readline=yes
VIRSH_LIBS="$VIRSH_LIBS -lreadline $LIBS"],,
[$LIBS])
;;
esac
test $lv_use_readline = no &&
AC_MSG_WARN([readline library not found])
LIBS=$lv_saved_libs
fi
if test $lv_use_readline = yes; then
AC_DEFINE_UNQUOTED([USE_READLINE], 1,
[whether virsh can use readline])
READLINE_CFLAGS=-DUSE_READLINE
else
READLINE_CFLAGS=
fi
2008-05-22 23:34:02 +08:00
AC_SUBST([READLINE_CFLAGS])
AC_SUBST([VIRSH_LIBS])
2005-12-08 18:23:34 +08:00
dnl check if the network driver should be compiled
AC_ARG_WITH([network],
AC_HELP_STRING([--with-network], [with virtual network driver @<:@default=yes@:>@]),[],[with_network=yes])
dnl there's no use compiling the network driver without the libvirt
dnl daemon, nor compiling it for MacOS X, where it breaks the compile
if test "$with_libvirtd" = "no" || test "$with_osx" = "yes"; then
with_network=no
fi
if test "$with_network" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_NETWORK], 1, [whether network driver is enabled])
fi
AM_CONDITIONAL([WITH_NETWORK], [test "$with_network" = "yes"])
with_bridge=no
if test "$with_qemu:$with_lxc:$with_network" != "no:no:no"; then
with_bridge=yes
AC_DEFINE_UNQUOTED([WITH_BRIDGE], 1, [whether bridge code is needed])
fi
AM_CONDITIONAL([WITH_BRIDGE], [test "$with_bridge" = "yes"])
AC_ARG_WITH([secrets],
AC_HELP_STRING([--with-secrets], [with local secrets management driver @<:@default=yes@:>@]),[],[with_secrets=yes])
if test "$with_libvirtd" = "no"; then
with_secrets=no
fi
if test "$with_secrets" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_SECRETS], 1, [whether local secrets management driver is available])
fi
AM_CONDITIONAL([WITH_SECRETS], [test "$with_secrets" = "yes"])
AC_ARG_WITH([storage-dir],
AC_HELP_STRING([--with-storage-dir], [with directory backend for the storage driver @<:@default=yes@:>@]),[],[with_storage_dir=yes])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([storage-fs],
AC_HELP_STRING([--with-storage-fs], [with FileSystem backend for the storage driver @<:@default=check@:>@]),[],[with_storage_fs=check])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([storage-lvm],
AC_HELP_STRING([--with-storage-lvm], [with LVM backend for the storage driver @<:@default=check@:>@]),[],[with_storage_lvm=check])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([storage-iscsi],
AC_HELP_STRING([--with-storage-iscsi], [with iSCSI backend for the storage driver @<:@default=check@:>@]),[],[with_storage_iscsi=check])
AC_ARG_WITH([storage-scsi],
AC_HELP_STRING([--with-storage-scsi], [with SCSI backend for the storage driver @<:@default=check@:>@]),[],[with_storage_scsi=check])
AC_ARG_WITH([storage-mpath],
AC_HELP_STRING([--with-storage-mpath], [with mpath backend for the storage driver @<:@default=check@:>@]),[],[with_storage_mpath=check])
2008-05-22 23:34:02 +08:00
AC_ARG_WITH([storage-disk],
AC_HELP_STRING([--with-storage-disk], [with GPartd Disk backend for the storage driver @<:@default=check@:>@]),[],[with_storage_disk=check])
AC_ARG_WITH([storage-rbd],
AC_HELP_STRING([--with-storage-rbd], [with RADOS Block Device backend for the storage driver @<:@default=check@:>@]),[],[with_storage_rbd=check])
AC_ARG_WITH([storage-sheepdog],
AC_HELP_STRING([--with-storage-sheepdog], [with Sheepdog backend for the storage driver @<:@default=check@:>@]),[],[with_storage_sheepdog=check])
2008-09-05 20:03:45 +08:00
if test "$with_libvirtd" = "no"; then
with_storage_dir=no
with_storage_fs=no
with_storage_lvm=no
with_storage_iscsi=no
with_storage_scsi=no
with_storage_mpath=no
2008-09-05 20:03:45 +08:00
with_storage_disk=no
with_storage_rbd=no
with_storage_sheepdog=no
2008-09-05 20:03:45 +08:00
fi
if test "$with_storage_dir" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_STORAGE_DIR], 1, [whether directory backend for storage driver is enabled])
fi
AM_CONDITIONAL([WITH_STORAGE_DIR], [test "$with_storage_dir" = "yes"])
dnl storage-fs does not work on MacOS X
if test "$with_osx" = "yes"; then
with_storage_fs=no
fi
2008-09-05 20:03:45 +08:00
if test "$with_storage_fs" = "yes" || test "$with_storage_fs" = "check"; then
AC_CHECK_HEADER([mntent.h],,
[
if test "$with_storage_fs" = "check"; then
with_storage_fs=no
AC_MSG_NOTICE([<mntent.h> is required for the FS storage driver, disabling it])
else
AC_MSG_ERROR([<mntent.h> is required for the FS storage driver])
fi
])
fi
if test "$with_storage_fs" = "yes" || test "$with_storage_fs" = "check"; then
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([MOUNT], [mount], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([UMOUNT], [umount], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([MKFS], [mkfs], [], [$PATH:/sbin:/usr/sbin])
if test "$with_storage_fs" = "yes" ; then
2008-05-22 23:34:02 +08:00
if test -z "$MOUNT" ; then AC_MSG_ERROR([We need mount for FS storage driver]) ; fi
2008-05-22 23:40:01 +08:00
if test -z "$UMOUNT" ; then AC_MSG_ERROR([We need umount for FS storage driver]) ; fi
if test -z "$MKFS" ; then AC_MSG_ERROR([We need mkfs for FS storage driver]) ; fi
else
if test -z "$MOUNT" ; then with_storage_fs=no ; fi
if test -z "$UMOUNT" ; then with_storage_fs=no ; fi
if test -z "$MKFS" ; then with_storage_fs=no ; fi
if test "$with_storage_fs" = "check" ; then with_storage_fs=yes ; fi
fi
if test "$with_storage_fs" = "yes" ; then
2008-05-22 23:34:02 +08:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_FS], 1, [whether FS backend for storage driver is enabled])
AC_DEFINE_UNQUOTED([MOUNT],["$MOUNT"],
[Location or name of the mount program])
AC_DEFINE_UNQUOTED([UMOUNT],["$UMOUNT"],
[Location or name of the mount program])
AC_DEFINE_UNQUOTED([MKFS],["$MKFS"],
[Location or name of the mkfs program])
fi
fi
2008-05-22 23:34:02 +08:00
AM_CONDITIONAL([WITH_STORAGE_FS], [test "$with_storage_fs" = "yes"])
if test "$with_storage_fs" = "yes"; then
AC_PATH_PROG([SHOWMOUNT], [showmount], [], [$PATH:/sbin:/usr/sbin])
AC_DEFINE_UNQUOTED([SHOWMOUNT], ["$SHOWMOUNT"],
[Location or name of the showmount program])
fi
if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([PVCREATE], [pvcreate], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGCREATE], [vgcreate], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVCREATE], [lvcreate], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([PVREMOVE], [pvremove], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGREMOVE], [vgremove], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVREMOVE], [lvremove], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVCHANGE], [lvchange], [], [$PATH:/sbin:/usr/sbin])
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([VGCHANGE], [vgchange], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGSCAN], [vgscan], [], [$PATH:/sbin:/usr/sbin])
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([PVS], [pvs], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGS], [vgs], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVS], [lvs], [], [$PATH:/sbin:/usr/sbin])
if test "$with_storage_lvm" = "yes" ; then
2008-05-22 23:34:02 +08:00
if test -z "$PVCREATE" ; then AC_MSG_ERROR([We need pvcreate for LVM storage driver]) ; fi
if test -z "$VGCREATE" ; then AC_MSG_ERROR([We need vgcreate for LVM storage driver]) ; fi
if test -z "$LVCREATE" ; then AC_MSG_ERROR([We need lvcreate for LVM storage driver]) ; fi
if test -z "$PVREMOVE" ; then AC_MSG_ERROR([We need pvremove for LVM storage driver]) ; fi
if test -z "$VGREMOVE" ; then AC_MSG_ERROR([We need vgremove for LVM storage driver]) ; fi
if test -z "$LVREMOVE" ; then AC_MSG_ERROR([We need lvremove for LVM storage driver]) ; fi
if test -z "$LVCHANGE" ; then AC_MSG_ERROR([We need lvchange for LVM storage driver]) ; fi
2008-05-22 23:34:02 +08:00
if test -z "$VGCHANGE" ; then AC_MSG_ERROR([We need vgchange for LVM storage driver]) ; fi
if test -z "$VGSCAN" ; then AC_MSG_ERROR([We need vgscan for LVM storage driver]) ; fi
2008-05-22 23:34:02 +08:00
if test -z "$PVS" ; then AC_MSG_ERROR([We need pvs for LVM storage driver]) ; fi
if test -z "$VGS" ; then AC_MSG_ERROR([We need vgs for LVM storage driver]) ; fi
if test -z "$LVS" ; then AC_MSG_ERROR([We need lvs for LVM storage driver]) ; fi
else
if test -z "$PVCREATE" ; then with_storage_lvm=no ; fi
if test -z "$VGCREATE" ; then with_storage_lvm=no ; fi
if test -z "$LVCREATE" ; then with_storage_lvm=no ; fi
if test -z "$PVREMOVE" ; then with_storage_lvm=no ; fi
if test -z "$VGREMOVE" ; then with_storage_lvm=no ; fi
if test -z "$LVREMOVE" ; then with_storage_lvm=no ; fi
if test -z "$LVCHANGE" ; then with_storage_lvm=no ; fi
if test -z "$VGCHANGE" ; then with_storage_lvm=no ; fi
if test -z "$VGSCAN" ; then with_storage_lvm=no ; fi
if test -z "$PVS" ; then with_storage_lvm=no ; fi
if test -z "$VGS" ; then with_storage_lvm=no ; fi
if test -z "$LVS" ; then with_storage_lvm=no ; fi
if test "$with_storage_lvm" = "check" ; then with_storage_lvm=yes ; fi
fi
if test "$with_storage_lvm" = "yes" ; then
2008-05-22 23:34:02 +08:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_LVM], 1, [whether LVM backend for storage driver is enabled])
AC_DEFINE_UNQUOTED([PVCREATE],["$PVCREATE"],[Location of pvcreate program])
AC_DEFINE_UNQUOTED([VGCREATE],["$VGCREATE"],[Location of vgcreate program])
AC_DEFINE_UNQUOTED([LVCREATE],["$LVCREATE"],[Location of lvcreate program])
2011-06-08 15:07:24 +08:00
AC_DEFINE_UNQUOTED([PVREMOVE],["$PVREMOVE"],[Location of pvremove program])
AC_DEFINE_UNQUOTED([VGREMOVE],["$VGREMOVE"],[Location of vgremove program])
AC_DEFINE_UNQUOTED([LVREMOVE],["$LVREMOVE"],[Location of lvremove program])
AC_DEFINE_UNQUOTED([LVCHANGE],["$LVCHANGE"],[Location of lvchange program])
AC_DEFINE_UNQUOTED([VGCHANGE],["$VGCHANGE"],[Location of vgchange program])
AC_DEFINE_UNQUOTED([VGSCAN],["$VGSCAN"],[Location of vgscan program])
AC_DEFINE_UNQUOTED([PVS],["$PVS"],[Location of pvs program])
AC_DEFINE_UNQUOTED([VGS],["$VGS"],[Location of vgs program])
AC_DEFINE_UNQUOTED([LVS],["$LVS"],[Location of lvs program])
fi
fi
2008-05-22 23:34:02 +08:00
AM_CONDITIONAL([WITH_STORAGE_LVM], [test "$with_storage_lvm" = "yes"])
2008-02-20 23:49:25 +08:00
if test "$with_storage_iscsi" = "yes" || test "$with_storage_iscsi" = "check"; then
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([ISCSIADM], [iscsiadm], [], [$PATH:/sbin:/usr/sbin])
2008-02-20 23:49:25 +08:00
if test "$with_storage_iscsi" = "yes" ; then
2008-05-22 23:34:02 +08:00
if test -z "$ISCSIADM" ; then AC_MSG_ERROR([We need iscsiadm for iSCSI storage driver]) ; fi
2008-02-20 23:49:25 +08:00
else
if test -z "$ISCSIADM" ; then with_storage_iscsi=no ; fi
if test "$with_storage_iscsi" = "check" ; then with_storage_iscsi=yes ; fi
fi
if test "$with_storage_iscsi" = "yes" ; then
2008-05-22 23:34:02 +08:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_ISCSI], 1, [whether iSCSI backend for storage driver is enabled])
2008-02-20 23:49:25 +08:00
AC_DEFINE_UNQUOTED([ISCSIADM],["$ISCSIADM"],[Location of iscsiadm program])
fi
fi
2008-05-22 23:34:02 +08:00
AM_CONDITIONAL([WITH_STORAGE_ISCSI], [test "$with_storage_iscsi" = "yes"])
2008-02-20 23:49:25 +08:00
if test "$with_storage_scsi" = "check"; then
with_storage_scsi=yes
AC_DEFINE_UNQUOTED([WITH_STORAGE_SCSI], 1,
[whether SCSI backend for storage driver is enabled])
fi
2009-04-03 02:42:33 +08:00
AM_CONDITIONAL([WITH_STORAGE_SCSI], [test "$with_storage_scsi" = "yes"])
2008-02-20 23:49:25 +08:00
if test "$with_storage_mpath" = "check"; then
if test "$with_linux" = "yes"; then
with_storage_mpath=yes
AC_DEFINE_UNQUOTED([WITH_STORAGE_MPATH], 1,
[whether mpath backend for storage driver is enabled])
else
with_storage_mpath=no
fi
fi
AM_CONDITIONAL([WITH_STORAGE_MPATH], [test "$with_storage_mpath" = "yes"])
LIBRBD_LIBS=
if test "$with_storage_rbd" = "yes" || test "$with_storage_rbd" = "check"; then
AC_CHECK_HEADER([rbd/librbd.h], [LIBRBD_FOUND=yes; break;])
if test "$LIBRBD_FOUND" = "yes"; then
with_storage_rbd=yes
LIBRBD_LIBS="-lrbd -lrados"
AC_DEFINE_UNQUOTED([WITH_STORAGE_RBD], [1],
[whether RBD backend for storage driver is enabled])
else
with_storage_rbd=no
fi
fi
AM_CONDITIONAL([WITH_STORAGE_RBD], [test "$with_storage_rbd" = "yes"])
AC_SUBST([LIBRBD_LIBS])
if test "$with_storage_sheepdog" = "yes" ||
test "$with_storage_sheepdog" = "check"; then
AC_PATH_PROG([COLLIE], [collie], [], [$PATH:/sbin:/usr/sbin])
if test "$with_storage_sheepdog" = "yes"; then
if test -z "$COLLIE"; then
AC_MSG_ERROR([We need collie for Sheepdog storage driver])
fi
else
if test -z "$COLLIE"; then
with_storage_sheepdog=no
fi
if test "$with_storage_sheepdog" = "check"; then
with_storage_sheepdog=yes
fi
fi
if test "$with_storage_sheepdog" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_STORAGE_SHEEPDOG], 1,
[whether Sheepdog backend for storage driver is enabled])
AC_DEFINE_UNQUOTED([COLLIE],["$COLLIE"],[Location of collie program])
fi
fi
AM_CONDITIONAL([WITH_STORAGE_SHEEPDOG],
[test "$with_storage_sheepdog" = "yes"])
LIBPARTED_CFLAGS=
LIBPARTED_LIBS=
if test "$with_storage_disk" = "yes" ||
test "$with_storage_disk" = "check"; then
2008-05-22 23:34:02 +08:00
AC_PATH_PROG([PARTED], [parted], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([DMSETUP], [dmsetup], [], [$PATH:/sbin:/usr/sbin])
if test -z "$PARTED" ; then
PARTED_FOUND=no
else
PARTED_FOUND=yes
fi
if test -z "$DMSETUP" ; then
DMSETUP_FOUND=no
else
DMSETUP_FOUND=yes
fi
if test "$PARTED_FOUND" = "yes" && test "x$PKG_CONFIG" != "x" ; then
PKG_CHECK_MODULES([LIBPARTED], [libparted >= $PARTED_REQUIRED], [],
[PARTED_FOUND=no])
fi
if test "$PARTED_FOUND" = "no"; then
# RHEL-5 vintage parted is missing pkg-config files
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
PARTED_FOUND=yes
2008-05-22 23:34:02 +08:00
AC_CHECK_HEADER([parted/parted.h],,[PARTED_FOUND=no])
AC_CHECK_LIB([uuid], [uuid_generate],,[PARTED_FOUND=no])
AC_CHECK_LIB([parted], [ped_device_read],,[PARTED_FOUND=no])
LIBPARTED_LIBS="-luuid -lparted"
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
fi
if test "$with_storage_disk" = "yes" &&
test "$PARTED_FOUND:$DMSETUP_FOUND" != "yes:yes"; then
AC_MSG_ERROR([Need both parted and dmsetup for disk storage driver])
fi
if test "$with_storage_disk" = "check"; then
if test "$PARTED_FOUND:$DMSETUP_FOUND" != "yes:yes"; then
with_storage_disk=no
else
with_storage_disk=yes
fi
fi
if test "$with_storage_disk" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_STORAGE_DISK], 1,
[whether Disk backend for storage driver is enabled])
AC_DEFINE_UNQUOTED([PARTED],["$PARTED"],
[Location or name of the parted program])
AC_DEFINE_UNQUOTED([DMSETUP],["$DMSETUP"],
[Location or name of the dmsetup program])
fi
fi
2008-05-22 23:34:02 +08:00
AM_CONDITIONAL([WITH_STORAGE_DISK], [test "$with_storage_disk" = "yes"])
AC_SUBST([LIBPARTED_CFLAGS])
AC_SUBST([LIBPARTED_LIBS])
if test "$with_storage_mpath" = "yes" ||
test "$with_storage_disk" = "yes"; then
DEVMAPPER_CFLAGS=
DEVMAPPER_LIBS=
PKG_CHECK_MODULES([DEVMAPPER], [devmapper >= $DEVMAPPER_REQUIRED], [], [DEVMAPPER_FOUND=no])
if test "$DEVMAPPER_FOUND" = "no"; then
# devmapper is missing pkg-config files in ubuntu, suse, etc
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
DEVMAPPER_FOUND=yes
AC_CHECK_LIB([devmapper], [dm_task_run],,[DEVMAPPER_FOUND=no])
DEVMAPPER_LIBS="-ldevmapper"
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
fi
AC_CHECK_HEADERS([libdevmapper.h],,[DEVMAPPER_FOUND=no])
if test "$DEVMAPPER_FOUND" = "no" ; then
AC_MSG_ERROR([You must install device-mapper-devel/libdevmapper >= $DEVMAPPER_REQUIRED to compile libvirt])
fi
fi
AC_SUBST([DEVMAPPER_CFLAGS])
AC_SUBST([DEVMAPPER_LIBS])
with_storage=no
for backend in dir fs lvm iscsi scsi mpath rbd disk; do
if eval test \$with_storage_$backend = yes; then
with_storage=yes
break
fi
done
if test $with_storage = yes; then
AC_DEFINE([WITH_STORAGE], [1],
[Define to 1 if at least one storage backend is in use])
fi
AM_CONDITIONAL([WITH_STORAGE], [test "$with_storage" = "yes"])
dnl
dnl check for (ESX)
dnl
if test "$with_curl" != "yes" ; then
if test "$with_esx" = "check"; then
with_esx=no
else
AC_MSG_ERROR([Curl is required for the ESX driver])
fi
else
if test "$with_esx" = "check"; then
with_esx=yes
fi
fi
if test "$with_esx" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_ESX], 1, [whether ESX driver is enabled])
fi
AM_CONDITIONAL([WITH_ESX], [test "$with_esx" = "yes"])
with_vmx=yes
if test "$with_esx" != "yes" && test "$with_vmware" != "yes"; then
with_vmx=no
fi
if test "$with_vmx" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_VMX], 1, [whether VMware VMX config handling is enabled])
fi
AM_CONDITIONAL([WITH_VMX], [test "$with_vmx" = "yes"])
if test "$with_xenapi" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_XENAPI], 1, [whether XenAPI driver is enabled])
fi
AM_CONDITIONAL([WITH_XENAPI], [test "$with_xenapi" = "yes"])
maint: turn on gcc logical-op checking This would have detected the bug in commit 38ad33931 (Aug 09), which we missed until commit f828ca35 (Jul 10); over 11 months later. However, on Fedora 13, it also triggers LOTS of warnings from the libcurl-devel header for two files: esx/esx_vi.c: In function 'esxVI_CURL_Perform': esx/esx_vi.c:232: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] esx/esx_vi.c:232: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] esx/esx_vi.c:232: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] ... xenapi/xenapi_driver.c: In function 'call_func': xenapi/xenapi_driver.c:1872: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] xenapi/xenapi_driver.c:1872: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] xenapi/xenapi_driver.c:1872: error: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] ... libcurl allows to disable the type-checking code that triggers those warnings, along with the reduction in type-safety of calls to some libcurl functions. I figure this is worth the improved compiler checking throughout the rest of libvirt. * acinclude.m4 (--enable-compile-warnings=error): Add -Wlogical-op. * configure.ac: Add -DCURL_DISABLE_TYPECHECK to LIBCURL_CFLAGS to avoid compilation warning. Suggested by Daniel P. Berrange. Tweaked by Matthias Bolte.
2010-07-24 04:28:31 +08:00
# XXX as of libcurl-devel-7.20.1-3.fc13.x86_64, curl ships a version
# of <curl/curl.h> that #defines several wrapper macros around underlying
# functions to add type safety for gcc only. However, these macros
# spuriously trip gcc's -Wlogical-op warning. Avoid the warning by
# disabling the wrappers; even if it removes some type-check safety.
LIBCURL_CFLAGS="-DCURL_DISABLE_TYPECHECK $LIBCURL_CFLAGS"
AC_SUBST([LIBCURL_CFLAGS])
AC_SUBST([LIBCURL_LIBS])
dnl
dnl check for Hyper-V
dnl
if test "$with_hyperv" != "no"; then
if test "$with_openwsman" != "yes"; then
if test "$with_hyperv" = "check"; then
with_hyperv=no
else
AC_MSG_ERROR([openwsman is required for the Hyper-V driver])
fi
else
with_hyperv=yes
fi
fi
if test "$with_hyperv" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_HYPERV], 1, [whether Hyper-V driver is enabled])
fi
AM_CONDITIONAL([WITH_HYPERV], [test "$with_hyperv" = "yes"])
dnl
dnl check for python
dnl
AC_ARG_WITH([python],
AC_HELP_STRING([--with-python], [Build python bindings @<:@default=yes@:>@]),[],[with_python=yes])
if test "$enable_shared:$with_python" = no:yes; then
AC_MSG_WARN([Disabling shared libraries is incompatible with building Python extensions.])
AC_MSG_WARN([Ignoring --with-python.])
with_python=no
fi
PYTHON_VERSION=
PYTHON_INCLUDES=
if test "$with_python" != "no" ; then
if test -x "$with_python/bin/python"
then
AC_MSG_NOTICE(Found python in $with_python/bin/python)
PYTHON="$with_python/bin/python"
with_python=yes
else
if test -x "$with_python"
then
AC_MSG_NOTICE(Found python in $with_python)
PYTHON="$with_python"
with_python=yes
else
if test -x "$PYTHON"
then
AC_MSG_NOTICE(Found python in environment PYTHON=$PYTHON)
with_python=yes
fi
fi
fi
if test "$with_python" = "yes" ; then
AM_PATH_PYTHON(,, [:])
if test "$PYTHON" != : ; then
PYTHON_CONFIG="$PYTHON-config"
if test -x "$PYTHON_CONFIG"
then
PYTHON_INCLUDES=`$PYTHON_CONFIG --includes`
else
if test -r $PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION/Python.h
then
PYTHON_INCLUDES=-I$PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION
else
if test -r $prefix/include/python$PYTHON_VERSION/Python.h
then
PYTHON_INCLUDES=-I$prefix/include/python$PYTHON_VERSION
else
if test -r /usr/include/python$PYTHON_VERSION/Python.h
then
PYTHON_INCLUDES=-I/usr/include/python$PYTHON_VERSION
else
AC_MSG_ERROR([You must install python-devel to build Python bindings])
fi
fi
fi
fi
else
AC_MSG_ERROR([You must install python to build Python bindings])
fi
else
AC_MSG_NOTICE([Could not find python in $with_python, disabling bindings])
with_python=no
fi
fi
AM_CONDITIONAL([WITH_PYTHON], [test "$with_python" = "yes"])
2008-05-22 23:34:02 +08:00
AC_SUBST([PYTHON_VERSION])
AC_SUBST([PYTHON_INCLUDES])
dnl Allow perl overrides
AC_PATH_PROG([PERL], [perl])
AC_ARG_ENABLE([with-test-suite],
AC_HELP_STRING([--with-test-suite], [build test suite by default @<:@default=check@:>@]),
[case "${withval}" in
yes|no|check) ;;
*) AC_MSG_ERROR([bad value ${withval} for tests option]) ;;
esac],
[withval=check])
AC_MSG_CHECKING([Whether to build test suite by default])
if test "$withval" = "check" ; then
if test -d $srcdir/.git ; then
withval=yes
else
withval=no
fi
fi
AC_MSG_RESULT([$withval])
AM_CONDITIONAL([WITH_TESTS], [test "$withval" = "yes"])
2008-05-22 23:34:02 +08:00
AC_ARG_ENABLE([test-coverage],
AC_HELP_STRING([--enable-test-coverage], [turn on code coverage instrumentation @<:@default=no@:>@]),
[case "${enableval}" in
yes|no) ;;
*) AC_MSG_ERROR([bad value ${enableval} for test-coverage option]) ;;
esac],
[enableval=no])
2008-05-29 23:13:07 +08:00
enable_coverage=$enableval
2008-05-29 23:13:07 +08:00
if test "${enable_coverage}" = yes; then
save_WARN_CFLAGS=$WARN_CFLAGS
WARN_CFLAGS=
gl_WARN_ADD([-fprofile-arcs])
gl_WARN_ADD([-ftest-coverage])
COVERAGE_FLAGS=$WARN_CFLAGS
AC_SUBST([COVERAGE_CFLAGS], [$COVERAGE_FLAGS])
AC_SUBST([COVERAGE_LDFLAGS], [$COVERAGE_FLAGS])
WARN_CFLAGS=$save_WARN_CFLAGS
fi
2008-05-29 23:13:07 +08:00
AC_ARG_ENABLE([test-oom],
AC_HELP_STRING([--enable-test-oom], [memory allocation failure checking @<:@default=no@:>@]),
2008-05-29 23:13:07 +08:00
[case "${enableval}" in
yes|no) ;;
*) AC_MSG_ERROR([bad value ${enableval} for test-oom option]) ;;
esac],
[enableval=no])
enable_oom=$enableval
if test "${enable_oom}" = yes; then
have_trace=yes
AC_CHECK_HEADER([execinfo.h],[],[have_trace=no])
AC_CHECK_FUNC([backtrace],[],[have_trace=no])
if test "$have_trace" = "yes"; then
AC_DEFINE([TEST_OOM_TRACE], 1, [Whether backtrace() is available])
fi
AC_DEFINE([TEST_OOM], 1, [Whether malloc OOM checking is enabled])
fi
AC_ARG_ENABLE([test-locking],
AC_HELP_STRING([--enable-test-locking], [thread locking tests using CIL @<:@default=no@:>@]),
[case "${enableval}" in
yes|no) ;;
*) AC_MSG_ERROR([bad value ${enableval} for test-locking option]) ;;
esac],
[enableval=no])
enable_locking=$enableval
if test "$enable_locking" = "yes"; then
LOCK_CHECKING_CFLAGS="-Dbool=char -D_Bool=char -save-temps"
AC_SUBST([LOCK_CHECKING_CFLAGS])
fi
AM_CONDITIONAL([WITH_CIL],[test "$enable_locking" = "yes"])
dnl Enable building libvirtd?
2008-05-22 23:34:02 +08:00
AM_CONDITIONAL([WITH_LIBVIRTD],[test "x$with_libvirtd" = "xyes"])
dnl Check for gettext - don't go any newer than what RHEL 5 supports
dnl
dnl save and restore CPPFLAGS around gettext check as the internal iconv
dnl check might leave -I/usr/local/include in CPPFLAGS on FreeBSD resulting
dnl in the build picking up previously installed libvirt/libvirt.h instead
dnl of the correct one from the source tree.
dnl compute the difference between save_CPPFLAGS and CPPFLAGS and append it
dnl to INCLUDES in order to preserve changes made by gettext but in a place
dnl that does not break the build
save_CPPFLAGS="$CPPFLAGS"
AM_GNU_GETTEXT_VERSION([0.17])
AM_GNU_GETTEXT([external])
GETTEXT_CPPFLAGS=
if test "x$save_CPPFLAGS" != "x$CPPFLAGS"; then
set dummy $CPPFLAGS; shift
for var
do
case " $var " in
" $save_CPPFLAGS ") ;;
*) GETTEXT_CPPFLAGS="$GETTEXT_CPPFLAGS $var" ;;
esac
done
fi
CPPFLAGS="$save_CPPFLAGS"
AC_SUBST([GETTEXT_CPPFLAGS])
ALL_LINGUAS=`cd "$srcdir/po" > /dev/null && ls *.po | sed 's+\.po$++'`
dnl Extra link-time flags for Cygwin.
dnl Copied from libxml2 configure.in, but I removed mingw changes
dnl for now since I'm not supporting mingw at present. - RWMJ
CYGWIN_EXTRA_LDFLAGS=
CYGWIN_EXTRA_LIBADD=
CYGWIN_EXTRA_PYTHON_LIBADD=
MINGW_EXTRA_LDFLAGS=
WIN32_EXTRA_CFLAGS=
dnl libvirt.syms is generated in builddir, but libvirt_qemu.syms is in git;
dnl hence the asymmetric naming of these two symbol files.
LIBVIRT_SYMBOL_FILE=libvirt.syms
LIBVIRT_LXC_SYMBOL_FILE='$(srcdir)/libvirt_lxc.syms'
LIBVIRT_QEMU_SYMBOL_FILE='$(srcdir)/libvirt_qemu.syms'
MSCOM_LIBS=
case "$host" in
*-*-cygwin*)
CYGWIN_EXTRA_LDFLAGS="-no-undefined"
CYGWIN_EXTRA_LIBADD="${INTLLIBS}"
MSCOM_LIBS="-lole32 -loleaut32"
if test "x$PYTHON_VERSION" != "x"; then
CYGWIN_EXTRA_PYTHON_LIBADD="-L/usr/lib/python${PYTHON_VERSION}/config -lpython${PYTHON_VERSION}"
fi
;;
*-*-mingw*)
MINGW_EXTRA_LDFLAGS="-no-undefined"
MSCOM_LIBS="-lole32 -loleaut32"
;;
*-*-msvc*)
MSCOM_LIBS="-lole32 -loleaut32"
;;
esac
case "$host" in
*-*-mingw* | *-*-cygwin* | *-*-msvc* )
# If the host is Windows, and shared libraries are disabled, we
# need to add -DLIBVIRT_STATIC to the CFLAGS for proper linking
if test "x$enable_shared" = "xno"; then
WIN32_EXTRA_CFLAGS="-DLIBVIRT_STATIC"
fi
esac
case "$host" in
*-*-mingw* | *-*-msvc* )
# Also set the symbol file to .def, so src/Makefile generates libvirt.def
# from libvirt.syms and passes libvirt.def instead of libvirt.syms to the linker
LIBVIRT_SYMBOL_FILE=libvirt.def
LIBVIRT_LXC_SYMBOL_FILE=libvirt_lxc.def
LIBVIRT_QEMU_SYMBOL_FILE=libvirt_qemu.def
# mingw's ld has the --version-script parameter, but it requires a .def file
# instead to work properly, therefore clear --version-script here and use
# -Wl, to pass the .def file to the linker
# cygwin's ld has the --version-script parameter too, but for some reason
# it's working there as expected
VERSION_SCRIPT_FLAGS="-Wl,"
;;
esac
2008-05-22 23:34:02 +08:00
AC_SUBST([CYGWIN_EXTRA_LDFLAGS])
AC_SUBST([CYGWIN_EXTRA_LIBADD])
AC_SUBST([CYGWIN_EXTRA_PYTHON_LIBADD])
AC_SUBST([MINGW_EXTRA_LDFLAGS])
AC_SUBST([WIN32_EXTRA_CFLAGS])
AC_SUBST([LIBVIRT_SYMBOL_FILE])
AC_SUBST([LIBVIRT_LXC_SYMBOL_FILE])
AC_SUBST([LIBVIRT_QEMU_SYMBOL_FILE])
AC_SUBST([VERSION_SCRIPT_FLAGS])
AC_SUBST([MSCOM_LIBS])
dnl Look for windres to build a Windows icon resource.
case "$host" in
*-*-mingw* | *-*-cygwin* | *-*-msvc* )
AC_CHECK_TOOL([WINDRES], [windres], [])
;;
esac
AM_CONDITIONAL([WITH_WIN_ICON], [test "$WINDRES" != ""])
2008-11-21 20:16:08 +08:00
dnl Driver-Modules library
AC_ARG_WITH([driver-modules],
AC_HELP_STRING([--with-driver-modules],
[build drivers as loadable modules @<:@default=check@:>@]),
2008-11-21 20:16:08 +08:00
[],
[with_driver_modules=check])
if test "$with_libvirtd" = "no" ; then
with_driver_modules=no
fi
2008-11-21 20:16:08 +08:00
DRIVER_MODULE_CFLAGS=
DRIVER_MODULE_LIBS=
if test "$with_driver_modules" = "yes" || test "$with_driver_modules" = "check"; then
if test "$dlfcn_found" != "yes" || test "$dlopen_found" != "yes"; then
if test "$with_driver_modules" = "yes" ; then
AC_MSG_ERROR([You must have dlfcn.h / dlopen() support to build driver modules])
else
with_driver_modules=no
fi
else
with_driver_modules=yes
fi
fi
if test "$with_driver_modules" = "yes" ; then
DRIVER_MODULE_CFLAGS="-export-dynamic"
case $ac_cv_search_dlopen in
no*) DRIVER_MODULE_LIBS= ;;
*) DRIVER_MODULE_LIBS=$ac_cv_search_dlopen ;;
esac
2008-11-21 20:16:08 +08:00
AC_DEFINE_UNQUOTED([WITH_DRIVER_MODULES], 1, [whether to build drivers as modules])
fi
AM_CONDITIONAL([WITH_DRIVER_MODULES], [test "$with_driver_modules" != "no"])
AC_SUBST([DRIVER_MODULE_CFLAGS])
AC_SUBST([DRIVER_MODULE_LIBS])
2008-11-21 20:16:08 +08:00
# Set LV_LIBTOOL_OBJDIR to "." or $lt_cv_objdir, depending on whether
# we're building shared libraries. This is the name of the directory
# in which .o files will be created.
test "$enable_shared" = no && lt_cv_objdir=.
LV_LIBTOOL_OBJDIR=${lt_cv_objdir-.}
2008-05-22 23:34:02 +08:00
AC_SUBST([LV_LIBTOOL_OBJDIR])
with_nodedev=no;
if test "$with_hal" = "yes" || test "$with_udev" = "yes";
then
with_nodedev=yes
AC_DEFINE_UNQUOTED([WITH_NODE_DEVICES], 1, [with node device driver])
fi
AM_CONDITIONAL([WITH_NODE_DEVICES], [test "$with_nodedev" = "yes"])
dnl nwfilter should only be compiled for linux, and only if the
dnl libvirt daemon is also being compiled
with_nwfilter=yes
if test "$with_libvirtd" = "no" || test "$with_linux" != "yes"; then
with_nwfilter=no
fi
if test "$with_nwfilter" = "yes" ; then
AC_DEFINE([WITH_NWFILTER], 1, [whether local network filter management driver is available])
fi
AM_CONDITIONAL([WITH_NWFILTER], [test "$with_nwfilter" = "yes"])
dnl check if the interface driver should be compiled
AC_ARG_WITH([interface],
AC_HELP_STRING([--with-interface],
[with host interface driver @<:@default=check@:>@]), [],
[with_interface=check])
dnl Don't compile the interface driver without libvirtd
if test "$with_libvirtd" = "no" ; then
with_interface=no
fi
dnl The interface driver depends on the netcf library or udev library
case $with_interface:$with_netcf:$with_udev in
check:*yes*) with_interface=yes ;;
check:no:no) with_interface=no ;;
yes:no:no) AC_MSG_ERROR([Requested the Interface driver without netcf or udev support]) ;;
esac
if test "$with_interface" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_INTERFACE], [1],
[whether the interface driver is enabled])
fi
AM_CONDITIONAL([WITH_INTERFACE], [test "$with_interface" = "yes"])
if test $with_freebsd = yes; then
default_qemu_user=root
default_qemu_group=wheel
else
default_qemu_user=root
default_qemu_group=root
fi
AC_ARG_WITH([qemu-user],
AC_HELP_STRING([--with-qemu-user],
[username to run QEMU system instance as @<:@default=platform dependent@:>@]),
[QEMU_USER=${withval}],
[QEMU_USER=${default_qemu_user}])
AC_ARG_WITH([qemu-group],
AC_HELP_STRING([--with-qemu-group],
[groupname to run QEMU system instance as @<:@default=platform dependent@:>@]),
[QEMU_GROUP=${withval}],
[QEMU_GROUP=${default_qemu_group}])
AC_DEFINE_UNQUOTED([QEMU_USER], ["$QEMU_USER"], [QEMU user account])
AC_DEFINE_UNQUOTED([QEMU_GROUP], ["$QEMU_GROUP"], [QEMU group account])
AC_ARG_WITH([macvtap],
AC_HELP_STRING([--with-macvtap],[enable macvtap device @<:@default=check@:>@]),
[with_macvtap=${withval}],
[with_macvtap=check])
AC_MSG_CHECKING([whether to compile with macvtap support])
if test "$with_macvtap" != "no" ; then
AC_TRY_COMPILE([ #include <sys/socket.h>
#include <linux/rtnetlink.h> ],
[ int x = MACVLAN_MODE_BRIDGE;
int y = IFLA_VF_MAX; ],
[ with_macvtap=yes ],
[ if test "$with_macvtap" = "yes" ; then
AC_MSG_ERROR([Installed linux headers don't show support for macvtap device.])
fi
with_macvtap=no ])
if test "$with_macvtap" = "yes" ; then
val=1
else
val=0
fi
AC_DEFINE_UNQUOTED([WITH_MACVTAP], $val, [whether macvtap support is enabled])
fi
AM_CONDITIONAL([WITH_MACVTAP], [test "$with_macvtap" = "yes"])
AC_MSG_RESULT([$with_macvtap])
if test "$with_macvtap" = yes; then
AC_CHECK_DECLS([MACVLAN_MODE_PASSTHRU], [], [], [[
#include <sys/socket.h>
#include <linux/if_link.h>
]])
fi
AC_ARG_WITH([virtualport],
AC_HELP_STRING([--with-virtualport],[enable virtual port support @<:@default=check@:>@]),
[with_virtualport=${withval}],
[with_virtualport=check])
dnl Warn the user and error out if they requested virtualport support with configure
dnl options, but the required macvtap support isn't available
if test "$with_virtualport" = "yes"; then
if test "$with_macvtap" = "no"; then
AC_MSG_ERROR([--with-virtualport requires --with-macvtap])
fi
fi
dnl virtualport checks
if test "$with_macvtap" != "yes"; then
with_virtualport=no
fi
if test "$with_virtualport" != "no"; then
AC_MSG_CHECKING([whether to compile with virtual port support])
AC_TRY_COMPILE([ #include <sys/socket.h>
#include <linux/rtnetlink.h> ],
[ int x = IFLA_PORT_MAX; ],
[ with_virtualport=yes ],
[ if test "$with_virtualport" = "yes" ; then
AC_MSG_ERROR([Installed linux headers don't show support for virtual port support.])
fi
with_virtualport=no ])
if test "$with_virtualport" = "yes"; then
val=1
else
val=0
fi
AC_DEFINE_UNQUOTED([WITH_VIRTUALPORT], $val,
[whether vsi vepa support is enabled])
AC_MSG_RESULT([$with_virtualport])
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 09:35:22 +08:00
fi
AM_CONDITIONAL([WITH_VIRTUALPORT], [test "$with_virtualport" = "yes"])
dnl netlink library
have_libnl=no
if test "$with_linux" = "yes"; then
# When linking with netcf, we must ensure that we pick the same version
# of libnl that netcf picked. Prefer libnl-3 unless we can prove
# netcf linked against libnl-1, or unless the user set LIBNL_CFLAGS.
# (Setting LIBNL_CFLAGS is already used by PKG_CHECK_MODULES to
# override any probing, so if it set, you know which libnl is in use.)
libnl_ldd=
for dir in /usr/lib64 /usr/lib /usr/lib/*-linux-gnu*; do
if test -f $dir/libnetcf.so; then
libnl_ldd=`(ldd $dir/libnetcf.so) 2>&1`
break
fi
done
case $libnl_ldd:${LIBNL_CFLAGS+set} in
*libnl.so.1*:) ;;
*)
PKG_CHECK_MODULES([LIBNL], [libnl-3.0], [
have_libnl=yes
AC_DEFINE([HAVE_LIBNL3], [1], [Use libnl-3.0])
AC_DEFINE([HAVE_LIBNL], [1], [whether the netlink library is available])
PKG_CHECK_MODULES([LIBNL_ROUTE3], [libnl-route-3.0])
LIBNL_CFLAGS="$LIBNL_CFLAGS $LIBNL_ROUTE3_CFLAGS"
LIBNL_LIBS="$LIBNL_LIBS $LIBNL_ROUTE3_LIBS"
], [:]) ;;
esac
if test "$have_libnl" = no; then
PKG_CHECK_MODULES([LIBNL], [libnl-1 >= $LIBNL_REQUIRED], [
have_libnl=yes
AC_DEFINE_UNQUOTED([HAVE_LIBNL], [1],
[whether the netlink library is available])
AC_DEFINE_UNQUOTED([HAVE_LIBNL1], [1],
[whether the netlink v1 library is available])
], [
if test "$with_macvtap" = "yes"; then
AC_MSG_ERROR([libnl-devel >= $LIBNL_REQUIRED is required for macvtap support])
fi
])
fi
fi
AM_CONDITIONAL([HAVE_LIBNL], [test "$have_libnl" = "yes"])
AC_SUBST([LIBNL_CFLAGS])
AC_SUBST([LIBNL_LIBS])
# Only COPYING.LIB is under version control, yet COPYING
# is included as part of the distribution tarball.
# Copy one to the other, but only if this is a srcdir-build.
# You are unlikely to be doing distribution-related things in a non-srcdir build
test "x$srcdir" = x. && ! test -f COPYING &&
cp -f COPYING.LIB COPYING
# Detect when running under the clang static analyzer's scan-build driver
# or Coverity-prevent's cov-build. Define STATIC_ANALYSIS accordingly.
AC_CACHE_CHECK([whether this build is done by a static analysis tool],
[lv_cv_static_analysis], [
lv_cv_static_analysis=no
if test -n "${CCC_ANALYZER_ANALYSIS+set}" || \
test -n "$COVERITY_BUILD_COMMAND$COVERITY_LD_PRELOAD"; then
lv_cv_static_analysis=yes
fi
])
t=0
test "x$lv_cv_static_analysis" = xyes && t=1
AC_DEFINE_UNQUOTED([STATIC_ANALYSIS], [$t],
[Define to 1 when performing static analysis.])
# Some GNULIB base64 symbols clash with a kerberos library
AC_DEFINE_UNQUOTED([isbase64],[libvirt_gl_isbase64],[Hack to avoid symbol clash])
AC_DEFINE_UNQUOTED([base64_encode],[libvirt_gl_base64_encode],[Hack to avoid symbol clash])
AC_DEFINE_UNQUOTED([base64_encode_alloc],[libvirt_gl_base64_encode_alloc],[Hack to avoid symbol clash])
AC_CONFIG_FILES([run],
[chmod +x,-w run])
AC_OUTPUT(Makefile src/Makefile include/Makefile docs/Makefile \
docs/schemas/Makefile \
gnulib/lib/Makefile \
Add gnulib-tool unit tests. * bootstrap: Re-add --with-tests, now that gnulib-tool arranges to use separate libraries for lib/ and tests/. * configure.in (AC_OUTPUT): Add gnulib/tests/Makefile.in. * Makefile.am (SUBDIRS): Add gnulib/tests. * gnulib/tests/Makefile.am: New file. * gnulib/lib/.cvsignore: Sort. * gnulib/lib/Makefile.am, gnulib/m4/getdelim.m4, gnulib/m4/getline.m4: * gnulib/m4/gnulib-cache.m4, gnulib/m4/gnulib-comp.m4: Regenerate. * gnulib/tests/test-alloca-opt.c: New file, from gnulib. * gnulib/tests/test-arpa_inet.c: Likewise. * gnulib/tests/test-fseeko.c: Likewise. * gnulib/tests/test-fseeko.sh: Likewise. * gnulib/tests/test-getaddrinfo.c: Likewise. * gnulib/tests/test-getdelim.c: Likewise. * gnulib/tests/test-getline.c: Likewise. * gnulib/tests/test-lseek.c: Likewise. * gnulib/tests/test-lseek.sh: Likewise. * gnulib/tests/test-netinet_in.c: Likewise. * gnulib/tests/test-snprintf.c: Likewise. * gnulib/tests/test-stdbool.c: Likewise. * gnulib/tests/test-stdint.c: Likewise. * gnulib/tests/test-stdio.c: Likewise. * gnulib/tests/test-stdlib.c: Likewise. * gnulib/tests/test-string.c: Likewise. * gnulib/tests/test-sys_select.c: Likewise. * gnulib/tests/test-sys_socket.c: Likewise. * gnulib/tests/test-sys_stat.c: Likewise. * gnulib/tests/test-sys_time.c: Likewise. * gnulib/tests/test-unistd.c: Likewise. * gnulib/tests/test-vasnprintf.c: Likewise. * gnulib/tests/test-vasprintf.c: Likewise. * gnulib/tests/test-wchar.c: Likewise. * gnulib/tests/dummy.c: Likewise. * gnulib/tests/intprops.h: Likewise. * gnulib/tests/verify.h: Likewise.
2007-12-11 02:26:56 +08:00
gnulib/tests/Makefile \
libvirt.pc libvirt.spec mingw-libvirt.spec \
po/Makefile.in \
include/libvirt/Makefile include/libvirt/libvirt.h \
2006-05-09 23:35:46 +08:00
python/Makefile python/tests/Makefile \
daemon/Makefile \
tools/Makefile \
tests/Makefile \
examples/apparmor/Makefile \
examples/domain-events/events-c/Makefile \
examples/domsuspend/Makefile \
examples/dominfo/Makefile \
examples/openauth/Makefile \
examples/python/Makefile \
examples/hellolibvirt/Makefile \
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-15 00:30:32 +08:00
examples/systemtap/Makefile \
examples/xml/nwfilter/Makefile)
2007-09-19 07:36:30 +08:00
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Configuration summary])
AC_MSG_NOTICE([=====================])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Drivers])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ Xen: $with_xen])
AC_MSG_NOTICE([ QEMU: $with_qemu])
AC_MSG_NOTICE([ UML: $with_uml])
AC_MSG_NOTICE([ OpenVZ: $with_openvz])
AC_MSG_NOTICE([ VMware: $with_vmware])
AC_MSG_NOTICE([ VBox: $with_vbox])
AC_MSG_NOTICE([ XenAPI: $with_xenapi])
AC_MSG_NOTICE([ xenlight: $with_libxl])
AC_MSG_NOTICE([ LXC: $with_lxc])
AC_MSG_NOTICE([ PHYP: $with_phyp])
AC_MSG_NOTICE([ ESX: $with_esx])
AC_MSG_NOTICE([ Hyper-V: $with_hyperv])
AC_MSG_NOTICE([Parallels: $with_parallels])
AC_MSG_NOTICE([ Test: $with_test])
AC_MSG_NOTICE([ Remote: $with_remote])
AC_MSG_NOTICE([ Network: $with_network])
AC_MSG_NOTICE([ Libvirtd: $with_libvirtd])
AC_MSG_NOTICE([Interface: $with_interface])
AC_MSG_NOTICE([ macvtap: $with_macvtap])
AC_MSG_NOTICE([ virtport: $with_virtualport])
2007-09-19 07:36:30 +08:00
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Storage Drivers])
AC_MSG_NOTICE([])
2008-09-05 20:03:45 +08:00
AC_MSG_NOTICE([ Dir: $with_storage_dir])
AC_MSG_NOTICE([ FS: $with_storage_fs])
AC_MSG_NOTICE([ NetFS: $with_storage_fs])
AC_MSG_NOTICE([ LVM: $with_storage_lvm])
2008-02-20 23:49:25 +08:00
AC_MSG_NOTICE([ iSCSI: $with_storage_iscsi])
AC_MSG_NOTICE([ SCSI: $with_storage_scsi])
AC_MSG_NOTICE([ mpath: $with_storage_mpath])
AC_MSG_NOTICE([ Disk: $with_storage_disk])
AC_MSG_NOTICE([ RBD: $with_storage_rbd])
AC_MSG_NOTICE([Sheepdog: $with_storage_sheepdog])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Security Drivers])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ SELinux: $with_secdriver_selinux ($SELINUX_MOUNT)])
AC_MSG_NOTICE([AppArmor: $with_secdriver_apparmor])
AC_MSG_NOTICE([])
2008-11-21 20:16:08 +08:00
AC_MSG_NOTICE([Driver Loadable Modules])
AC_MSG_NOTICE([])
if test "$with_driver_modules" != "no" ; then
AC_MSG_NOTICE([ dlopen: $DRIVER_MODULE_CFLAGS $DRIVER_MODULE_LIBS])
2008-11-21 20:16:08 +08:00
else
AC_MSG_NOTICE([ dlopen: no])
fi
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Libraries])
AC_MSG_NOTICE([])
LIBVIRT_RESULT_APPARMOR
LIBVIRT_RESULT_ATTR
LIBVIRT_RESULT_AUDIT
LIBVIRT_RESULT_AVAHI
LIBVIRT_RESULT_BLKID
LIBVIRT_RESULT_CAPNG
LIBVIRT_RESULT_CURL
LIBVIRT_RESULT_DBUS
LIBVIRT_RESULT_FUSE
LIBVIRT_RESULT_HAL
LIBVIRT_RESULT_NETCF
LIBVIRT_RESULT_NUMACTL
LIBVIRT_RESULT_OPENWSMAN
LIBVIRT_RESULT_PCIACCESS
LIBVIRT_RESULT_SANLOCK
LIBVIRT_RESULT_SASL
LIBVIRT_RESULT_SELINUX
LIBVIRT_RESULT_SSH2
LIBVIRT_RESULT_UDEV
LIBVIRT_RESULT_YAJL
AC_MSG_NOTICE([ libxml: $LIBXML_CFLAGS $LIBXML_LIBS])
AC_MSG_NOTICE([ dlopen: $DLOPEN_LIBS])
if test "$with_hyperv" = "yes" ; then
AC_MSG_NOTICE([openwsman: $OPENWSMAN_CFLAGS $OPENWSMAN_LIBS])
else
AC_MSG_NOTICE([openwsman: no])
fi
if test "$with_gnutls" != "no" ; then
AC_MSG_NOTICE([ gnutls: $GNUTLS_CFLAGS $GNUTLS_LIBS])
else
AC_MSG_NOTICE([ gnutls: no])
fi
network: use firewalld instead of iptables, when available * configure.ac, spec file: firewalld defaults to enabled if dbus is available, otherwise is disabled. If --with_firewalld is explicitly requested and dbus is not available, configure will fail. * bridge_driver: add dbus filters to get the FirewallD1.Reloaded signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1. When these are encountered, reload all the iptables reuls of all libvirt's virtual networks (similar to what happens when libvirtd is restarted). * iptables, ebtables: use firewall-cmd's direct passthrough interface when available, otherwise use iptables and ebtables commands. This decision is made once the first time libvirt calls iptables/ebtables, and that decision is maintained for the life of libvirtd. * Note that the nwfilter part of this patch was separated out into another patch by Stefan in V2, so that needs to be revised and re-reviewed as well. ================ All the configure.ac and specfile changes are unchanged from Thomas' V3. V3 re-ran "firewall-cmd --state" every time a new rule was added, which was extremely inefficient. V4 uses VIR_ONCE_GLOBAL_INIT to set up a one-time initialization function. The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called vir(Ip|Eb)OnceInit(), which will then be called the first time that the static function vir(Ip|Eb)TablesInitialize() is called (that function is defined for you by the macro). This is thread-safe, so there is no chance of any race. IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init functions (one for iptables, on for ebtables) as VIR_WARN so that I don't have to turn on all the other debug message just to see these. Even if this patch doesn't need any other modification, those messages need to be changed to VIR_DEBUG before pushing. This one-time initialization works well. However, I've encountered problems with testing: 1) Whenever I have enabled the firewalld service, *all* attempts to call firewall-cmd from within libvirtd end with firewall-cmd hanging internally somewhere. This is *not* the case if firewall-cmd returns non-0 in response to "firewall-cmd --state" (i.e. *that* command runs and returns to libvirt successfully.) 2) If I start libvirtd while firewalld is stopped, then start firewalld later, this triggers libvirtd to reload its iptables rules, however it also spits out a *ton* of complaints about deletion failing (I suppose because firewalld has nuked all of libvirt's rules). I guess we need to suppress those messages (which is a more annoying problem to fix than you might think, but that's another story). 3) I noticed a few times during this long line of errors that firewalld made a complaint about "Resource Temporarily unavailable. Having libvirtd access iptables commands directly at the same time as firewalld is doing so is apparently problematic. 4) In general, I'm concerned about the "set it once and never change it" method - if firewalld is disabled at libvirtd startup, causing libvirtd to always use iptables/ebtables directly, this won't cause *terrible* problems, but if libvirtd decides to use firewall-cmd and firewalld is later disabled, libvirtd will not be able to recover.
2012-08-15 02:59:52 +08:00
AC_MSG_NOTICE([firewalld: $with_firewalld])
2007-12-06 02:21:27 +08:00
if test "$with_polkit" = "yes" ; then
if test "$with_polkit0" = "yes" ; then
AC_MSG_NOTICE([ polkit: $POLKIT_CFLAGS $POLKIT_LIBS (version 0)])
else
AC_MSG_NOTICE([ polkit: $PKCHECK_PATH (version 1)])
fi
2007-12-06 02:21:27 +08:00
else
AC_MSG_NOTICE([ polkit: no])
fi
if test "$with_xen" = "yes" ; then
2009-01-20 20:25:40 +08:00
AC_MSG_NOTICE([ xen: $XEN_CFLAGS $XEN_LIBS])
else
2009-01-20 20:25:40 +08:00
AC_MSG_NOTICE([ xen: no])
fi
if test "$with_xenapi" = "yes" ; then
AC_MSG_NOTICE([ xenapi: $LIBXENSERVER_CFLAGS $LIBXENSERVER_LIBS])
else
AC_MSG_NOTICE([ xenapi: no])
fi
if test "$with_libxl" = "yes" ; then
AC_MSG_NOTICE([xenlight: $LIBXL_CFLAGS $LIBXL_LIBS])
else
AC_MSG_NOTICE([xenlight: no])
fi
if test "$with_qemu" = "yes" && test "$LIBPCAP_FOUND" != "no"; then
nwfilter: Support for learning a VM's IP address This patch implements support for learning a VM's IP address. It uses the pcap library to listen on the VM's backend network interface (tap) or the physical ethernet device (macvtap) and tries to capture packets with source or destination MAC address of the VM and learn from DHCP Offers, ARP traffic, or first-sent IPv4 packet what the IP address of the VM's interface is. This then allows to instantiate the network traffic filtering rules without the user having to provide the IP parameter somewhere in the filter description or in the interface description as a parameter. This only supports to detect the parameter IP, which is for the assumed single IPv4 address of a VM. There is not support for interfaces that may have multiple IP addresses (IP aliasing) or IPv6 that may then require more than one valid IP address to be detected. A VM can have multiple independent interfaces that each uses a different IP address and in that case it will be attempted to detect each one of the address independently. So, when for example an interface description in the domain XML has looked like this up to now: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'> <parameter name='IP' value='10.2.3.4'/> </filterref> </interface> you may omit the IP parameter: <interface type='bridge'> <source bridge='mybridge'/> <model type='virtio'/> <filterref filter='clean-traffic'/> </interface> Internally I am walking the 'tree' of a VM's referenced network filters and determine with the given variables which variables are missing. Now, the above IP parameter may be missing and this causes a libvirt-internal thread to be started that uses the pcap library's API to listen to the backend interface (in case of macvtap to the physical interface) in an attempt to determine the missing IP parameter. If the backend interface disappears the thread terminates assuming the VM was brought down. In case of a macvtap device a timeout is being used to wait for packets from the given VM (filtering by VM's interface MAC address). If the VM's macvtap device disappeared the thread also terminates. In all other cases it tries to determine the IP address of the VM and will then apply the rules late on the given interface, which would have happened immediately if the IP parameter had been explicitly given. In case an error happens while the firewall rules are applied, the VM's backend interface is 'down'ed preventing it to communicate. Reasons for failure for applying the network firewall rules may that an ebtables/iptables command failes or OOM errors. Essentially the same failure reasons may occur as when the firewall rules are applied immediately on VM start, except that due to the late application of the filtering rules the VM now is already running and cannot be hindered anymore from starting. Bringing down the whole VM would probably be considered too drastic. While a VM's IP address is attempted to be determined only limited updates to network filters are allowed. In particular it is prevented that filters are modified in such a way that they would introduce new variables. A caveat: The algorithm does not know which one is the appropriate IP address of a VM. If the VM spoofs an IP address in its first ARP traffic or IPv4 packets its filtering rules will be instantiated for this IP address, thus 'locking' it to the found IP address. So, it's still 'safer' to explicitly provide the IP address of a VM's interface in the filter description if it is known beforehand. * configure.ac: detect libpcap * libvirt.spec.in: require libpcap[-devel] if qemu is built * src/internal.h: add the new ATTRIBUTE_PACKED define * src/Makefile.am src/libvirt_private.syms: add the new modules and symbols * src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added * src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch] src/nwfilter/nwfilter_ebiptables_driver.[ch] src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in * tests/nwfilterxml2xmltest: extend testing
2010-04-08 05:02:18 +08:00
AC_MSG_NOTICE([ pcap: $LIBPCAP_CFLAGS $LIBPCAP_LIBS])
else
AC_MSG_NOTICE([ pcap: no])
fi
if test "$have_libnl" = "yes" ; then
AC_MSG_NOTICE([ nl: $LIBNL_CFLAGS $LIBNL_LIBS])
else
AC_MSG_NOTICE([ nl: no])
fi
if test "$with_vbox" = "yes" && test -n "$MSCOM_LIBS" ; then
AC_MSG_NOTICE([ mscom: $MSCOM_LIBS])
else
AC_MSG_NOTICE([ mscom: no])
fi
if test "$with_remote" = "yes" || test "$with_libvirtd" = "yes" ; then
AC_MSG_NOTICE([ xdr: $XDR_CFLAGS])
else
AC_MSG_NOTICE([ xdr: no])
fi
if test "$with_storage_rbd" = "yes" ; then
AC_MSG_NOTICE([ rbd: $LIBRBD_LIBS])
else
AC_MSG_NOTICE([ rbd: no])
fi
2007-09-19 07:36:30 +08:00
AC_MSG_NOTICE([])
2008-05-29 23:13:07 +08:00
AC_MSG_NOTICE([Test suite])
AC_MSG_NOTICE([])
2009-01-20 20:25:40 +08:00
AC_MSG_NOTICE([ Coverage: $enable_coverage])
2008-05-29 23:13:07 +08:00
AC_MSG_NOTICE([ Alloc OOM: $enable_oom])
AC_MSG_NOTICE([])
2007-09-19 07:36:30 +08:00
AC_MSG_NOTICE([Miscellaneous])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ Debug: $enable_debug])
AC_MSG_NOTICE([ Use -Werror: $set_werror])
AC_MSG_NOTICE([ Warning Flags: $WARN_CFLAGS])
AC_MSG_NOTICE([ Readline: $lv_use_readline])
AC_MSG_NOTICE([ Python: $with_python])
AC_MSG_NOTICE([ DTrace: $with_dtrace])
AC_MSG_NOTICE([ numad: $with_numad])
AC_MSG_NOTICE([ XML Catalog: $XML_CATALOG_FILE])
AC_MSG_NOTICE([ Init script: $with_init_script])
AC_MSG_NOTICE([Char device locks: $with_chrdev_lock_files])
2007-09-19 07:36:30 +08:00
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Privileges])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ QEMU: $QEMU_USER:$QEMU_GROUP])
AC_MSG_NOTICE([])