openkylin
/
libvirt
mirror of https://gitee.com/openkylin/libvirt.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
libvirt/tests/qemuxml2xmloutdata/balloon-device-auto.xml

37 lines
1.3 KiB
XML
Raw Normal View History

tests: Test qemuxml2xml when expected xml changes Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-25 06:18:18 +08:00
<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 08:48:38 +08:00
<memory unit='KiB'>219100</memory>
<currentMemory unit='KiB'>219100</currentMemory>
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
2012-05-09 00:04:36 +08:00
<vcpu placement='static'>1</vcpu>
tests: Test qemuxml2xml when expected xml changes Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-25 06:18:18 +08:00
<os>
<type arch='i686' machine='pc'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
tests: fix name of 32-bit x86 QEMU binary The 32-bit x86 binary is called qemu-system-i386, not qemu-system-i686. This mistake across many test XML files was not noticed because the mistake was also made in testutilsqemu.c when mocking the capabilities. Reviewed-by: Erik Skultety <eskultet@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-30 00:33:37 +08:00
<emulator>/usr/bin/qemu-system-i386</emulator>
tests: Test qemuxml2xml when expected xml changes Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-25 06:18:18 +08:00
<disk type='block' device='disk'>
tests: qemuxml2xml: Remove testing with allowed format detection Nobody should use format detection due to security implications. The result of the change is that 'raw' format will be printed unless specified explicitly. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-03-02 22:43:55 +08:00
<driver name='qemu' type='raw'/>
tests: Test qemuxml2xml when expected xml changes Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-25 06:18:18 +08:00
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='hda' bus='ide'/>
conf: Introduce new attribute for device address format * src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type.
2012-02-27 18:19:54 +08:00
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
tests: Test qemuxml2xml when expected xml changes Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-25 06:18:18 +08:00
</disk>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-28 05:03:52 +08:00
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
qemu: auto-add pci-root controller for pc machine types <controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
2013-04-22 20:16:13 +08:00
<controller type='pci' index='0' model='pci-root'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-28 05:03:52 +08:00
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
device: cleanup input device code The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-11 19:40:32 +08:00
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-28 05:03:52 +08:00
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</memballoon>
tests: Test qemuxml2xml when expected xml changes Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: Cole Robinson <crobinso@redhat.com>
2010-07-25 06:18:18 +08:00
</devices>
</domain>