Add an element to configure the thread pool size:
...
<binary>
<thread_pool size='16'/>
</binary>
...
https://bugzilla.redhat.com/show_bug.cgi?id=2072905
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The check was historically done only for _TYPE_VOLUME disks, but
refactors to allow _TYPE_VOLUME disks in the backing chain caused a
regression where we'd reject startupPolicy also for _TYPE_BLOCK disks
which historically worked well.
Fix it by using the 'virDomainDiskDefValidateStartupPolicy' helper and
use it only when the top level image is a _TYPE_VOLUME as in other cases
it was already validated. This also allows _TYPE_BLOCK volumes to use
startup policy.
Fixes: 37f01262ee
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2095758
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our startup policy checkers work only for local paths, so disk sources
such as NVMe, or vhost-user can't be used with startup policy.
Unfortunately the validation did not catch these cases. Fix it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into 'virDomainDiskDefValidateStartupPolicy' which will be
later reused in the qemu driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove linebreak and mention the attribute name. Also prepare the error
messages for future by substituting the type of offending access.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the function to use modern XML formatting machinery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
This patch introduces the logic to format and parse remote NVRAM.
Update NVRAM element schema, and docs for supporting network backed
NVRAM. NVRAM backed over network would give the flexibility to start
the VM on any host without having to worry about where to get the latest
nvram image.
<nvram type='network'>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/0'>
<host name='example.com' port='6000'/>
</source>
</nvram>
or
<nvram type='file'>
<source file='/var/lib/libvirt/nvram/guest_VARS.fd'/>
</nvram>
In the qemu driver we will support the new definition only with qemu's
supporting -blockdev.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Introduce virDomainLoaderDefFormatNvram and extract the code to it so
that it's self-contained in upcoming patches adding more complex logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Prepare for network backed nvram by refusing the reset of nvram on boot
and don't check whether it exists. We will not support filling it from a
template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Setup all fields for use with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
We don't really use it besides when starting up the VM so when
reconnecting this step is totally pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Use the designated helpers for virStorageSource instead using the
file-based ones with a check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Since we now have a full virStorageSource for storing the nvram path we
don't need the extra dance of transferring the data into the 'pflash1'
variable which was an intermediary solution to use -blockdev.
For now we keep it functionally identical to the previous impl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Currently, libvirt allows only local filepaths to specify the location
of the 'nvram' image. Changing it to virStorageSource type will allow
supporting remote storage for nvram.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Extract the internals of qemuDomainPrepareStorageSourceBlockdev into
qemuDomainPrepareStorageSourceBlockdevNodename so that we can reuse it
when instantiating the virStorageSource for pflash backing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
This is a partial revert of 87a43a907f
The change to use g_clear_pointer() in more places was accidentally
applied to cases involving vir_g_source_unref().
In some cases, the ordering of g_source_destroy() and
vir_g_source_unref() was reversed, which resulted in the source being
marked as destroyed, after it is already unreferenced. This
use-after-free case might work in many cases, but with versions of
glib older than 2.64.0 it may defer unref to run within the main
thread to avoid a race condition, which creates a large distance
between the g_source_unref() and g_source_destroy().
In some cases, the call to vir_g_source_unref() was replaced with a
second call to g_source_destroy(), leading to a memory leak or worse.
In our experience, the symptoms were that use of libvirt-python became
slower over time, with OpenStack nova-compute initially taking around
one second to periodically query the host PCI devices, and within an
hour it was taking over a minute to complete the same operation, until
it is was eventually running this query back-to-back, resulting in the
nova-compute process consuming 100% of one CPU thread, losing its
RabbitMQ connection frequently, and showing up as down to the control
plane.
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When creating a TAP interface we can end up with multiple FDs,
each representing one queue. However, these FDs must be
relabelled as they are then passed to QEMU. In case of
qemuBuildInterfaceConnect() we allocate the array for the FDs and
then let function corresponding to the <interface/> type to fill
the array with FDs. When any of the functions meets an error,
it's also responsible for closing previously opened FDs. However,
the functions take a shortcut: iterate through each member of the
array and close it (if it's non-negative). This assumes that the
array is initialized to negative values, which use to be the case
before rewrite in v8.4.0-rc1~170 but after it it's no longer the
case. Subsequently, "random" FDs are closed (okay, not that
random since the array is allocated via g_new0(), but hey - FD 0
is still valid FD and might be valuable, actually).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383#c18
Fixes: 7a38d3946b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For some types of SRIOV interfaces we create a temporary file
where the state of the interface is saved before we start
modifying it. The file is used then to restore the original
configuration when the interface is no longer associated with any
guest. For writing the file virFileWriteStr() is used. However,
it's given wrong argument: the last argument is supposed to be
mode to create the file with but virNetDevSaveNetConfig() passes
open(2) flags (O_CREAT|O_TRUNC|O_WRONLY). We need the file to be
writable and readable by root only (0600). Therefore, pass that
mode instead of gibberish.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit v7.1.0-136-g6a6d6bb520 refactored virProcessSetMaxMemLock by
moving its part into a new virProcessSetLimit, but lost "return -1" on
error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the main-loop and iothread classes are derived from the
same class (EventLoopBaseClass) we don't need new capability and
can use QEMU_CAPS_IOTHREAD_THREAD_POOL_MAX directly to check
whether QEMU's capable of setting defaultiothread pool size.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of v7.0.0-877-g70ac26b9e5 QEMU exposes its default event loop
for devices with no IOThread assigned as an QMP object. In the
very next commit (v7.0.0-878-g71ad4713cc) it was extended for
thread-pool-min and thread-pool-max attributes. Expose them under
new <defaultiothread/> element.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in previous commit, QEMU driver needs to be taught how
to set VIR_DOMAIN_IOTHREAD_THREAD_POOL_MIN and
VIR_DOMAIN_IOTHREAD_THREAD_POOL_MAX parameters on given IOThread.
Fortunately, this is fairly trivial to do and since these two
parameters are exposed in domain XML too the update of inactive
XML can be wired up too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a capability that reflects whether QEMU is
capable of setting iothread pool size, let's introduce a
validator check to make sure users are not trying to use this
feature with QEMU that doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability reflects whether QEMU allows setting
thread-pool-min and thread-pool-max attributes on iothread
object. Since both attributes were introduced in the same commit
(v7.0.0-878-g71ad4713cc) and can't exist independently of each
other we can stick with one capability covering both of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At least in case of QEMU an IOThread is actually a pool of
threads (see iothread_set_aio_context_params() in QEMU's code
base). As such, it can have minimal and maximal number of worker
threads. Allow setting them in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, iothread configuration structure (virDomainIOThreadIDDef)
is allocated by plain g_new0(). This is perfectly okay because
all members of the struct default to value 0 anyway. But soon
this is going to change. Therefore, replace those g_new0() with a
function so that the default value can be set consistently in one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Formatting iothreads is currently open coded inside of
virDomainDefFormatInternalSetRootName(). While this works, it
makes the function needlessly long, especially if the formatting
code will expand in near future. Therefore, move it into a
separate function. At the same time, make
virDomainDefIothreadShouldFormat() accept const domain definition
so that the new function can also accept const domain definition.
Formatters shouldn't need to change definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In virDomainIOThreadIDDefArrayInit() the variable @iothrid is
used only inside a loop but is declared for whole function. Bring
the variable into the loop so that it's obvious that the variable
is not used elsewhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Using g_autoptr() for @iothrid variable inside
virDomainDefParseIOThreads() allows us to drop explicit call to
virDomainIOThreadIDDefFree() in one case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For easier attribute parsing we have virXMLProp*() family of
functions. These accept flags through which a caller can pose
some conditions onto the attribute value, for instance:
VIR_XML_PROP_NONZERO when the attribute may not be zero, etc.
What we are missing is VIR_XML_PROP_NONNEGATIVE when the
attribute value may be non-negative. Obviously, this flag makes
sense only for some members of the virXMLProp*() family.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
They were constructed from two separate strings using "%s: %s", which
is ugly and does not work well with translations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When a domain has a guest agent channel enabled and the agent is running
in the guest, we will get VSERPORT_CHANGE event on a destination host as
soon as we start vCPUs there. This is not an issue for normal migration,
but post-copy migration will remain running after we started vCPUs on
the destination. If it runs for more than 30s, the VSERPORT_CHANGE event
handler will fail to get a job and log the following error message:
Timed out during operation: cannot acquire state change lock (held
by monitor=remoteDispatchDomainMigrateFinish3Params)
and of course we will think the guest agent is not connected and thus
all APIs talking to it will fail. Until the agent or libvirt daemon is
restarted.
Luckily we only need to update the channel state (to mark it as
connected) and connect to the agent neither of which conflicts with
migration. Thus we can safely enable processing this event during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is a special job for operations that need to modify domain state
during an active migration. The modification must not affect any state
that could conflict with the migration code. This is useful mainly for
event handlers that need to be processed during migration and which
could otherwise time out on acquiring a normal MODIFY job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The original virDomainAbortJob did not support flags.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since all parts of post-copy recovery have been implemented now, it's
time to enable the corresponding flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Every single call to qemuMigrationJobContinue needs to register a
cleanup callback in case the migrating domain dies between phases or
when migration is paused due to a failure in postcopy mode.
Let's integrate registering the callback in qemuMigrationJobContinue to
make sure the current thread does not release a migration job without
setting a cleanup callback.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The callback will properly cleanup non-p2p migration job in case the
migrating domain dies between Begin and Perform while the client which
controls the migration is not cooperating (normally the API for the next
migration phase would handle this).
The same situation can happen even after Prepare and Perform phases, but
they both already register a suitable callback, so no fix is needed
there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally the structure is created once the source reports completed
migration, but with post-copy migration we can get here even after
libvirt daemon was restarted. It doesn't make sense to preserve the
structure in our status XML as we're going to rewrite almost all of it
while refreshing the stats anyway. So we just create the structure here
if it doesn't exist to make sure we can properly report statistics of a
completed migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Everything was already done in the normal Finish phase and vCPUs are
running. We just need to wait for all remaining data to be transferred.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The QEMU process is already running, all we need to do is to call
migrate-recover QMP command. Except for some checks and cookie handling,
of course.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Non-postcopy case talks to QEMU monitor and thus needs to create a
nested job. Since qemuMigrationAnyConnectionClosed is called in case
there's no thread processing a migration API, we need to make the
current thread a temporary owner of the migration job to avoid "This
thread doesn't seem to be the async job owner: 0". This is done by
starting a migration phase.
While no monitor interaction happens in postcopy case and just setting
the phase (to indicate a broken postcopy migration) would be enough,
being consistent and setting the owner does not hurt anything.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
To prepare the code for handling incoming migration too.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is now called qemuMigrationAnyConnectionClosed to make it
clear it is supposed to handle broken connection during migration. It
will soon be used on both sides of migration so the "Src" part was changed
to "Any" to avoid renaming the function twice in a row.
The original *Cleanup name could easily be confused with cleanup
callbacks called when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This command tells QEMU to start listening for an incoming post-copy
recovery connection. Just like migrate-incoming is used for starting
fresh migration on the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Offline migration jumps over a big part of qemuMigrationDstPrepareFresh.
Let's move that part into a new qemuMigrationDstPrepareActive function
to make the code easier to follow.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Moves most of the code from qemuMigrationDstPrepareAny to a new
qemuMigrationDstPrepareFresh so that qemuMigrationDstPrepareAny can be
shared with post-copy resume.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It just calls migrate QMP command with resume=true without having to
worry about migration capabilities or parameters, storage migration,
etc. since everything has already been done in the normal Perform phase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuMigrationSrcRun does a lot of thing before and after telling QEMU to
start the migration. Let's make the core reusable by moving it to a new
qemuMigrationSrcStart function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
To make the code flow a bit more sensible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Mostly we just need to check whether the domain is in a failed post-copy
migration that can be resumed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For historical reasons we automatically enabled VIR_MIGRATE_PAUSED flag
when a migration was started for a paused domain. However, when resuming
failed post-copy migration the domain on the source host will always be
paused (as it is already running on the destination host). We must avoid
enabling VIR_MIGRATE_PAUSED in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This flag can be used to restart post-copy migration once it failed
because of a broken connection.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This phase marks a migration protocol as broken in a post-copy phase.
Libvirt is no longer actively watching the migration in this phase as
the migration API that started the migration failed.
This may either happen when post-copy migration really fails (QEMU
enters postcopy-paused migration state) or when the migration still
progresses between both QEMU processes, but libvirt lost control of it
because the connection between libvirt daemons (in p2p migration) or a
daemon and client (non-p2p migration) was closed. For example, when one
of the daemons was restarted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Both qemuMigrationJobSetPhase and qemuMigrationJobStartPhase were doing
the same thing, which made little sense. Let's follow the difference
between qemuDomainObjSetJobPhase and qemuDomainObjStartJobPhase and
change job owner only in qemuMigrationJobStartPhase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We will want to update migration phase without affecting job ownership.
Either in the thread that already owns the job or from an event handler
which only changes the phase (of a job no-one owns) without assuming it.
Let's move the ownership change to a new qemuDomainObjStartJobPhase
helper and let qemuDomainObjSetJobPhase set the phase without touching
ownership.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The check can reveal a serious bug in our migration code and we should
not silently ignore it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Into a new qemuMigrationCheckPhase helper, which can be reused in other
places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When recovering from a failed post-copy migration, we need to go through
all migration phases again, but don't need to repeat all the steps in
each phase. Let's create a new set of migration phases dedicated to
post-copy recovery so that we can easily distinguish between normal and
recovery code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Turn the final part of Begin phase formatting a domain XML for migration
into a reusable helper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When libvirt daemon is restarted during an active post-copy migration,
we do not always mark the migration as broken. In this phase libvirt is
not really needed for migration to finish successfully. In fact the
migration could have even finished while libvirt was not running or it
may still be happily running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to use query-migrate QMP command to check the current migration
state when reconnecting to active domains, but the reply we get to this
command may not contain any statistics at all if called on the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far migration could only be completed while a migration API was
running and waiting for the migration to finish. In case such API could
not be called (the connection that initiated the migration is broken)
the migration would just be aborted or left in a "don't know what to do"
state. But this will change soon and we will be able to successfully
complete such migration once we get the corresponding event from QEMU.
This is specific to post-copy migration when vCPUs are already running
on the destination and we're only waiting for all memory pages to be
transferred. Such post-copy migration (which no-one is actively
watching) is called unattended migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Ján Tomko