Use automatic memory cleanup to get rid of the cleanup section,
and of the memory leak that happens inside the loop, because
cap, alloc and phy are only freed once per function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We didn't always save status xml after generating new taint message
which resulted in it being deleted in case of a libvirtd restart.
Some taint messages were preserved thanks to saving status xml
separately at the end of the calling functions. With this, every taint
message is saved, regardless of the calling functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1965589
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
test-lib.sh needs these to be set.
Export them so that the virsh-* tests can be run using:
builddir$ ./run srcdir/tests/virsh-snapshot
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove cleanup sections that are no longer needed, as well
as unnecessary 'ret' variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Do not use 'arg' which is later used for an allocated string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of using the same variable to store either a const pointer
or an allocated string, always make a copy.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is the preferred way to do it, but there were a few
instances in which some of the path components had embedded
slashes instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Turn 'mounts' into a proper GStrv after sorting so that automatic
cleanup can be used and shuffle around the cleanup steps so that jumps
can be avoided in favor of direct return of error code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'devMountsPath' and 'devMountsSavePath' are NULL terminated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'devMountsPath' can be converted to an auto-cleared stringlist and thus
asking for the number of entries is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller is passing a NULL terminated string list as
'devMountsPath' thus we don't need to get the count of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The value of 'next' is copied into 'item.file' so we can move the update
to the 'next' pointer earlier and move the VIR_APPEND_ELEMENT call to
where we figure out that we need to append the value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously they were stored in two separate arrays. This way it's
obvious when referencing the same one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virDomainAuthorizedSSHKeysGet and virDomainGetMessages return a
NULL-terminated string-list, so we can use g_auto(GStrv) to clear the
used memory on failures.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the 'qemuMonitorTest' object and the
list of keys so that the cleanup section can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the conversion from virPCIVirtualFunctionList which encapsulates
the list of virtual functions to two disjunct arrays.
This greatly simplifies the fetching of the parameters as well as
cleanup in the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virNetDevGetVirtualFunctions' calls 'virPCIGetVirtualFunctions' and
then re-iterates the returned list to fetch the interface names for the
returned virtual functions.
If we move the fetching of the interface name into
virPCIGetVirtualFunctions we can simplify the code and remove a bunch of
impossible error states.
To accomplish this the function is renamed to
'virPCIGetVirtualFunctionsFull' while keeping a wrapper with original
name and if the physical port ID is passed the interface name is fetched
too without the need to re-convert the address into a sysfs link.
For now 'virNetDevGetVirtualFunctions' still converts the returned data
into two lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a struct for holding the list of VFs returned by
virPCIGetVirtualFunctions so that we can employ automatic memory
clearing and also allow querying more information at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since UUID is not guaranteed to be unique by mdevctl, we may have more
than one nodedev with the same UUID. Therefore, we need to disambiguate
when looking up mdevs by specifying the UUID and parent address, which
mdevctl guarantees to be a unique combination.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, mdevctl supports defining more than one mdev with the
same UUID as long as they have different parent devices. (Only one of
these devices can be active at any given time).
This means that we can't use the UUID alone as a way to uniquely
identify mdev node devices. Append the parent address to ensure
uniqueness. For example:
Before: mdev_88a6b868_46bd_4015_8e5b_26107f82da38
After: mdev_88a6b868_46bd_4015_8e5b_26107f82da38_0000_00_02_0
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1979440
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mdevctl can report multiple defined devices with the same UUID
but different parents, including parents that don't actually exist on
the host machine. Libvirt sets the parent to the 'computer' device for
all of the mdevs that have nonexistent parents. Because of this, it's
possible that there are multiple devices with the same UUID and the same
'computer' device as their parent, so the combination of uuid and parent
nodedev name is not guaranteed to be a unique name.
We need to ensure that each nodedev has a unique name. If we can't use
the UUID as a unique nodedev name, and we can't use the combination of
UUID and nodedev parent name, we need to find another solution. By
caching and using the parent name reported by mdevctl in combination
with the UUID, we can achieve a unique name. mdevctl guarantees that its
uuid/parent combination is unique.
This value will be used to set the mdev nodedev name in a following commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path. This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.
We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.
One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a generic function that you can provide your own predicate
function to search for a particular device. It will be used in an
upcoming commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hypervisor drivers can be disabled in certain build scenarios, so
their corresponding post scripts need to match.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ján Tomko