Note the use of g_clear_pointer(..., g_free) in ppc64DataClear and virCPUx86Baseline.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When the guest agent isn't running, we still report success on a PM
suspend action even though we logged an error correctly, this is because
we poisoned the 'ret' value a few lines above.
Fixes: a663a86081
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In v6.7.0-rc1~86 I've tried to fix a problem where we were not
detecting NUMA nodes properly because we misused behaviour of a
libnuma API and as it turned out the behaviour was correct for
hosts with 64 CPUs in one NUMA node. So I changed the code to use
nodemask_isset(&numa_all_nodes, ..) instead and it fixed the
problem on such hosts. However, what I did not realize is that
numa_all_nodes does not reflect all NUMA nodes visible to
userspace, it contains only those nodes that the process
(libvirtd) an allocate memory from, which can be only a subset of
all NUMA nodes. The bitmask that contains all NUMA nodes visible
to userspace and which one I should have used is: numa_nodes_ptr.
For curious ones:
4a22f22382
And as I was fixing virNumaGetNodeCPUs() I came to realize that
we already have a function that wraps the correct bitmask:
virNumaNodeIsAvailable().
Fixes: 24d7d85208
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1876956
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function was introduced in the 2.0.6 release which happened
in December 2010. I think it is safe to assume that all libnuma
we deal with have the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virshDomainFree handles NULL pointers gracefully, so there's no need to
check the pointer before the call.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since we no longer need to wait for IPv6 DAD to complete, we never
call this function.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
0f7436ca54 added code during virtual network startup to wait for DAD
(Duplicate Address Detection) to complete if there were any IPv6
addresses on the network. This wait was needed because (according to
the commit log) "created problems when [the "dummy" tap device] is set
to IFF_DOWN prior to DAD completing".
That commit in turn referenced commit db488c7917, which had added the
code to set the dummy tap device IFF_DOWN, commenting "DAD has
happened (dnsmasq waits for it)", and in its commit message pointed
out that if we just got rid of the dummy tap device this wouldn't be
needed.
Now that the dummy tap device has indeed been removed (commit
ee6c936fbb), there is no longer any need to set it IFF_DOWN, and thus
nothing requiring us to wait for DAD to complete. At any rate, with
the dummy tap device removed, leaving nothing else on the bridge when
it is first started, DAD never completes, leading to failure to start
any IPv6 network.
So, yes, this patch removes the wait for DAD completion, and IPv6
networks can once again start, and their associated dnsmasq process
starts successfully (this is the problem that the DAD wait was
originally intended to fix)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
#useless_use_of_cat + avoid accidental substring matches.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The previous 11.3 image provided by Cirrus did not boot, but they have
now provided a working 11.4 image
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We are currently adding -lutil and -lkvm to the linker using the
add_project_link_arguments method. On FreeBSD 11.4, this results in
build errors because the args appear too early in the command line.
We need to pass the libraries as dependencies so that they get placed
at the same point in the linker args as other dependencies.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* Add a period to the end of the page's introductory sentence.
* Correct a spelling error: "Evangalism"/"evangalise" -> "Evangelism"/"evangelize"
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The original author intended to write "different than".
"Different" is commonly followed by "from", "than", and "to".
Globally, "from" is the most common.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This wires up support for using the new virt-ssh-helper binary with the ssh,
libssh and libssh2 protocols.
The new binary will be used preferentially if it is available in $PATH,
otherwise we fall back to traditional netcat.
The "proxy" URI parameter can be used to force use of netcat e.g.
qemu+ssh://host/system?proxy=netcat
or the disable fallback e.g.
qemu+ssh://host/system?proxy=native
With use of virt-ssh-helper, we can now support remote session URIs
qemu+ssh://host/session
and this will only use virt-ssh-helper, with no fallback. This also lets
the libvirtd process be auto-started, and connect directly to the
modular daemons, avoiding use of virtproxyd back-compat tunnelling.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch keyfile and netcat parameters, since the netcat path and
socket path are a logical pair that belong together. This patches
the other constructors.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When accessing libvirtd over a SSH tunnel, the remote driver needs a way
to proxy the SSH input/output stream to a suitable libvirt daemon. This
is currently done by spawning netcat, pointing it to the libvirtd socket
path. This is problematic for a number of reasons:
- The socket path varies according to the --prefix chosen at build
time. The remote client is seeing the local prefix, but what we
need is the remote prefix
- The socket path varies according to remote env variables, such as
the XDG_RUNTIME_DIR location. Again we see the local XDG_RUNTIME_DIR
value, but what we need is the remote value (if any)
- The remote driver doesn't know whether it must connect to the legacy
libvirtd or the modular daemons, so must always assume legacy
libvirtd for back-compat. This means we'll always end up using the
virtproxyd daemon adding an extra hop in the RPC layer.
- We can not able to autospawn the libvirtd daemon for session mode
access
To address these problems this patch introduces the 'virtd-ssh-helper'
program which takes the URI for the remote driver as a CLI parameter.
It then figures out which daemon to connect to and its socket path,
using the same code that the remote driver client would on the remote
host's build of libvirt.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We'll shortly want to reuse code for determining whether to connect to
the system or session daemon from places outside the remote driver
client. Pulling it out into a self contained function facilitates reuse.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The remoteGetUNIXSocketHelper method will be needed by source files
beyond the remote driver client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We delay converting the remote transport string to enum form until
fairly late. As a result we're doing string comparisons when we
could be just doing enum comparisons.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The remoteSplitURISCheme method will be needed by source files beyond
the remote driver client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The remoteDriverTransport and remoteDriverMode enums are going to be
needed by source files beyond the remote driver client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't want to repeat the choice of default netcat binary setting in
three different places. This will also make it possible to do better
error reporting in the helper.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Three parts of the code all build up the same SSH shell script
snippet for remote tunneling the RPC protocol, but in slightly
different ways. Combine them all into one helper method in the
virNetClient code, since this logic doesn't really belong in
the virNetSocket code.
Note that the this change means the shell snippet is passed to
the SSH binary as a single arg, instead of three separate args,
but this is functionally identical, as the three separate args
were combined into one already when passed to the remote system.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The changed condition was always false because the function was always
called with boundary values 0.
Use the free extent's start value to get its start offset from the
cylinder boundary and determine if the needed size for allocation
needs to be expanded too in case the offset doesn't fit within extra
bytes for alignment.
This fixes an issue where vol-create-from will call qemu-img convert
to create a destination volume of same capacity as the source volume
and qemu-img will error 'Cannot grow device files' due to the partition
being too small for the source although both destination partition and
source volume have the same capacity.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add some expanded examples for the nat ipv6 introduced with
927acaedec.
Unfortunately while for IPv4 it's well-known what addresses ranges are
useful for NAT, with IPv6 unless you enjoy digging through RFC's going
back-and-forth over unique local addresses and the meaning of the word
"site" it's generally much less obvious. I've tried to add some
details on choosing a range inline with RFC 4193 and then some
pointers for when it maybe doesn't work in the guest as you first
expect despite you doing what the RFC's say!
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When closing client->waitDispatch in virNetClientIOEventLoopRemoveAll
or virNetClientIOEventLoopRemoveDone, VIR_FREE() is called to free
call->msg directly, resulting in leak of the memory call->msg->buffer
points to.
Use virNetMessageFree(call->msg) instead of VIR_FREE(call->msg).
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Jim Fehlig