Commit Graph

385 Commits

Author SHA1 Message Date
Daniel P. Berrange f7ee34114d qemu: assume -no-reboot is always available
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Daniel P. Berrange 9cd0fe69cd qemu: assume -vnc arg always takes a ':'
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-10 10:38:01 +00:00
Andrea Bolognani fedbb015a9 qemu: Introduce QEMU_CAPS_DEVICE_VIRTIO_NET
This capability can be used to detect whether or not the QEMU
binary supports the virtio-net-* network device.
2015-09-10 09:25:02 +02:00
Andrea Bolognani fb58318d7f qemu: Introduce QEMU_CAPS_DEVICE_E1000
This capability can be used to detect whether or not the QEMU
binary supports the e1000 network device.
2015-09-10 09:25:01 +02:00
Andrea Bolognani b8d545a8b8 qemu: Introduce QEMU_CAPS_DEVICE_RTL8139
This capability can be used to detect whether or not the QEMU
binary supports the rtl8139 network device.
2015-09-10 09:25:01 +02:00
Laine Stump ad1748a1aa qemu: add capabilities bit for device xio3130-downstream
The downstream ports of an x3130-upstream switch can each have one of
these plugged into them (and that is the only place they can be
connected). Each xio3130-downstream provides a single PCIe port that
can have PCI or PCIe devices hotplugged into it. Apparently an entire
set of x3130-upstream + several xio3130-downstreams can be hotplugged
as a unit, but it's not clear to me yet how that would be done, since
qemu only allows attaching a single device at a time.

This device will be used to implement the
"pcie-switch-downstream-port" model of pci controller.
2015-08-09 22:29:25 -04:00
Laine Stump 4cde758808 qemu: add capabilities bit for device x3130-upstream
This is the upstream part of a PCIe switch. It connects to a PCIe port
(but not PCI) on the upstream side, and can have up to 31
xio3130-downstream controllers (but no other types of devices)
connected to its downstream side.

This device will be used to implement the "pcie-switch-upstream-port"
model of pci controller.
2015-08-09 22:02:16 -04:00
Laine Stump 408b100a06 qemu: add capabilities bit for device ioh3420
This is a PCIE "root port". It connects only to a port of the
integrated pcie.0 bus of a Q35 machine (can't be hotplugged), and
provides a single PCIe port that can have PCI or PCIe devices
hotplugged into it.

This device will be used to implement the "pcie-root-port" model of
pci controller.
2015-08-09 21:44:11 -04:00
Michal Privoznik 8e33cb41f3 qemu: Implement pci-serial
https://bugzilla.redhat.com/show_bug.cgi?id=998813

Implementation is pretty straight-forward. Of course, not all qemus
out there supports the device, so new capability is introduced and
checked prior each use of the device.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-05-21 17:49:02 +02:00
Peter Krempa 103707d4b7 qemu: caps: Add capability bit for the "pc-dimm" device
The pc-dimm device represents a RAM memory module.
2015-02-20 19:25:09 +01:00
Pavel Hrdina f480a87aa6 caps: introduce new QEMU capability for vgamem_mb device property
Allow setting vgamem size for video devices.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:05:56 +01:00
Matthias Gatto c5b71619bd qemu: Add Qemu capability for bps_max and friends
Add the capability to detect if the qemu binary have the capability
to use bps_max and friends
Add a value in the enum virQEMUCapsFlags for the qemu capability.
Set it with virQEMUCapsSet if the binary suport bps_max and they friends.

Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
2014-11-10 15:48:59 +01:00
Maxime Leroy e3d478eb51 qemu: add capability probing for ivshmem device
Ivshmem is supported by QEMU since 0.13 release.

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-10-03 22:43:08 +02:00
Jiri Denemark b3fd95e368 qemu: Add RDMA migration capabilities 2014-09-23 08:11:49 +02:00
Pavel Hrdina da7799d879 Move the FIPS detection from capabilities
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.

This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-09-19 09:08:23 +02:00
Martin Kletzander 9e1af156af qemu: add capability probing for splash-timeout
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:10:54 +02:00
Peter Krempa e260a0e60a conf: Add USB sound card support and implement it for qemu 2014-08-08 14:34:20 +02:00
Martin Kletzander 1a324c2f88 qemu: newer -numa parameter capability probing
When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch.  One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification.  This
will be used in later patch.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:46 +02:00
Eric Blake 40ad7160a2 blockjob: turn on qemu capability bit for active commit
Use the probing functionality added in the last patch to turn on
a capability bit when active commit is present, and gate active
commit on that capability.

For my own reference: the difference between BLOCKJOB_SYNC and
BLOCKJOB_ASYNC is whether qemu generated an event at the
conclusion of blockpull; basically, RHEL 6.2 was the only release
of qemu that has the sync semantics and lacks the event.  RHEL
6.3 added blockcopy, but also picked up on the upstream style
of qemu generating events.  As no one is likely to backport
active commit to RHEL 6.2, it's safe for blockcommit to always
require async blockjob support.

Modifying qemucapabilitiestest is painful; the .replies files would
be so much easier if they had comments correlating which command
generated the given reply.  Maybe I'll fix that up later...

* src/qemu/qemu_capabilities.h (QEMU_CAPS_ACTIVE_COMMIT): New
capability.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Use the new bit
* src/qemu/qemu_capabilities.c (virQEMUCaps): Name the new bit.
(virQEMUCapsProbeQMPCommands): Set it.
* tests/qemucapabilitiesdata/caps_1.3.1-1.replies: Update.
* tests/qemucapabilitiesdata/caps_1.4.2-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.5.3-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.0-1.replies: Likewise.
* tests/qemucapabilitiesdata/caps_1.6.50-1.replies: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-03 14:19:53 -06:00
Ján Tomko f3be5f0c50 Add support for timestamping QEMU logs
QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory

Enable this timestamp if the QEMU binary supports it.

Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
2014-05-07 10:27:50 +02:00
Laine Stump 17133e3702 qemu: add host-pci-multidomain capability
Quite a long time ago, (apparently between qemu 0.12 and 0.13) qemu
quietly began supporting the optional specification of a domain in the
host-side address of all pci passthrough commands (by simply
prepending it to the bus:slot.function format, as
"dddd:bb:ss.f"). Since machines with multiple PCI domains are very
rare, this never came up in practice, so libvirt was never updated to
support it.

This patch takes the first step to supporting specification of a non-0
domain in the host-side address of PCI devices being assigned to a
domain, by adding a capability bit to indicate support
"QEMU_CAPS_HOST_PCI_MULTIDOMAIN", and detect it. Since this support
was added in a version prior to the minimum version required for
QMP-style capabilities detection, the capability is always enabled for
any qemu that uses QMP for capabilities detection. For older qemus,
the only clue that a domain can be specified in the host pci address
is the presence of the string "[seg:]" in the help string for
-pcidevice. (Ironically, libvirt will not be modified to support
specification of domain for -pcidevice, since any qemu new enough for
us to care about also supports "-device pci-assign" or "-device
vfio-pci", which are greatly preferred).
2014-05-06 14:32:33 +03:00
Li Zhang f5ffd45f4c qemu: Add USB keyboard capability
Add USB keyboard capability probing and test cases.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Martin Kletzander d27e6bc40f qemu: introduce spiceport chardev backend
Add a new backend for any character device.  This backend uses channel
in spice connection.  This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.

Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well).  For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-02-11 13:43:55 +01:00
Francesco Romani 19bbc81276 spice: detect if qemu can disable file transfer
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch detects if QEMU supports this option, and add
a capability if does.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-21 11:35:40 +01:00
Eric Blake a21cfb0f48 qemu: ask for -enable-fips when FIPS is required
On a system that is enforcing FIPS, most libraries honor the
current mode by default.  Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux.  So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting.  Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).

The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474

* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-18 07:05:29 -07:00
Martin Kletzander 15275f2edb qemu: check for reboot-timeout on monitor
The support for <boot rebootTimeout="12345"/> was added before we were
checking for qemu command line options in QMP, so we haven't properly
adapted virQEMUCaps when using it and thus we report unsupported
option with new enough qemu.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2013-12-13 15:20:09 +01:00
Hu Tao 4d18758df8 qemu: add support for -device pvpanic
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu.  Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-13 05:53:33 -07:00
Laine Stump 96fddee322 qemu: add "-boot strict" to commandline whenever possible
This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=888635

(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).

Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.

The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
2013-12-03 11:58:26 +02:00
Ján Tomko 1569fa14d8 qemu: don't use deprecated -no-kvm-pit-reinjection
Since qemu-kvm 1.1 [1] (since 1.3. in upstream QEMU [2])
'-no-kvm-pit-reinjection' has been deprecated.
Use -global kvm-pit.lost_tick_policy=discard instead.

https://bugzilla.redhat.com/show_bug.cgi?id=978719

[1] http://git.kernel.org/cgit/virt/kvm/qemu-kvm.git/commit/?id=4e4fa39
[2] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=c21fb4f
2013-11-05 16:04:06 +01:00
Michal Privoznik 50c5818c0d qemucapabilitiesdata: Add qemu-1.6.50 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik 3e17d7956f qemucapabilitiesdata: Add qemu-1.6.0 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik 47674a2241 qemucapabilitiesdata: Add qemu-1.4.2 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik 37819287f8 qemucapabilitiesdata: Add qemu-1.3.1 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik f44cea7374 qemucapabilitiesdata: Add qemu-1.2.2 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik 63857eb4a0 tests: Introduce qemucapabilitiestest
This test is there to ensure that our capabilities detection code isn't
broken somehow.

How to gather test data:

Firstly, the data is split into two separate files. The former (with
suffix .replies) contains all the qemu replies. This is very fragile as
introducing a new device can mean yet another monitor command and hence
edit of this file in the future. But there's no better way of doing
this. To get this data simply turn on debug logs and copy all the
QEMU_MONITOR_IO_PROCESS lines. But be careful to not copy incomplete
ones (yeah, we report some incomplete lines too). Long story short, at
the libvirtd startup, a dummy qemu is spawn to get all the capabilities.

The latter (with suffix .caps) contains capabilities XML. Just start a
domain and copy the corresponding part from its state XML file.
Including <qemuCaps> tag.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-01 11:13:36 +02:00