Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.
However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The JSON property generator should not escape commas as we do on the
command line. The JSON->commandline generator already does that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have to escape commas when formatting them on the command line. Add a
test case of a TLS path containing a comma.
Note that the output is wrong, this test case is to prove there's a bug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of v2.12.0-rc0~32^2 QEMU is capable specifying which display
device and head should the screendump be taken from. Track this
capability so that we can use it later in our virDomainScreenshot
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let us update the existing xml and replies files for QEMU 2.12.0 on
s390x.
Used a z14 using a QEMU 2.12 GA build and the following sequence:
tests/qemucapsprobe /usr/bin/qemu-system-s390x > \
tests/qemucapabilitiesdata/caps_2.12.0.s390x.replies
VIR_TEST_REGENERATE_OUTPUT=1 tests/qemucapabilitiestest
VIR_TEST_REGENERATE_OUTPUT=1 tests/domaincapstest
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.
Drop the attribute and adjust the code accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk source definition should be validated in
qemuDomainValidateStorageSource rather than in individual generators of
command line arguments.
Change to the XML2XML test is required since now the definition is
actually validated at define time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In a lot of our mocks (if not all of them) we use our internal
APIs (e.g. VIR_ALLOC). So far, we're relying on test binary that
links with the mock to drag in libvirt.so. Well, this works only
partially. Firstly, whatever binary we execute from tests will
fail (e.g. as Martin reported on the list ./qemucapsprobe fails
to execute qemu). Secondly, if there's a program that tries to
validate linking (like valgrind is doing) it fails because of
unresolved symbols.
Because of that we have to link our mocks with libvirt.so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability vfio-ccw for supporting the basic
channel I/O passthrough, which have been introduced in QEMU 2.10. The
current focus is to support dasd-eckd (cu_type/dev_type = 0x3990/0x3390)
as the target device.
Let us also introduce the capability QEMU_CAPS_CCW_CSSID_UNRESTRICTED
for virtual-css-bridge. This capability is based on the
cssid-unrestricted property which exists if QEMU no longer enforces
cssid restrictions based on ccw device types.
Vfio-ccw capability is dependent on the hidden virtual-css-bridge, so
that we are able to probe for the cssid-unrestriced property to make
sure the devices are visible to non-mcss-e enabled guests.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.
The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.
Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if memory-backend-file has discard-data
attribute or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if qemu has "qom-list-properties" monitor
command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure that 'host_device' is generated for type='block'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The test cases would correspond to the following -drive command lines:
file-backing_basic-detect.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,detect-zeroes=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap-detect.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap,detect-zeroes=unmap
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap-ignore.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=ignore,detect-zeroes=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-backing_basic-unmap.xml:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
iscsi and rbd support authentication of the connection. Combine it with
encryption of qcow2.
The top level disk image would generate the following '-drive' cmdline:
-drive file=rbd:rbdpool/rbdimg:id=testuser-rbd:auth_supported=cephx\;none:
mon_host=host1.example.com\;host2.example.com,
file.password-secret=node-a-s-secalias,encrypt.format=luks,
encrypt.key-secret=node-b-f-encalias,format=qcow2,
if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add tests for backing chain handling, including a very long chain which
is fully specified in the XML and an unterminated chain.
The top level disk image would generate the following '-drive':
file-qcow2-backing-chain-encryption.xml:
-drive file=/var/lib/libvirt/images/a,encrypt.format=luks,
encrypt.key-secret=node-b-f-encalias,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-qcow2-backing-chain-noopts.xml:
-drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-qcow2-backing-chain-unterminated.xml:
-drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Apart from adding test data add a function which sets up fake secrets
for the test.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/path/luks.img,key-secret=test1-encalias,format=luks,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test that the 'aio' option is applied correctly for the 'file' protocol
backend and across the backing chain.
The top level disk image would generate the following '-drive' cmdline:
file-backing_basic-aio_threads:
-drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,aio=threads
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-raw-aio_native:
-drive file=/path/to/i.img,format=raw,if=none,id=drive-dummy,cache=none,aio=native
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test mapping of the 'FAT' disk format to 'vvfat' in qemu.
The top level disk image would generate the following '-drive' cmdline:
dir-fat-readonly.xml:
-drive file=fat:/var/somefiles,if=none,id=drive-dummy,readonly=on
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
dir-fat-floppy.xml
-drive file=fat:floppy:/var/somefiles,if=none,id=drive-dummy,readonly=on
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Formats supporting backing chain such as qed, vmdk, don't have any other
parameters than the backing store and 'qcow' has only encryption params
which will be tested extra. Add this test case so they are covered since
any further test cases will mainly care about 'qcow2' and 'raw'.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/var/lib/libvirt/images/a,format=qed,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to the 'raw' case add tests for bochs, cloop, dmg, ploop, vdi
vhd, and vpc. Covering all supported non-backing formats.
Note that the JSON name for 'ploop' maps to 'parallels' and 'vhd' maps
to 'vhdx'.
Files added here would result in the followint configs:
file-bochs-noopts.xml:
-drive file=/path/to/i.img,format=bochs,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-cloop-noopts.xml:
-drive file=/path/to/i.img,format=cloop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-dmg-noopts.xml:
-drive file=/path/to/i.img,format=dmg,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-ploop-noopts.xml:
-drive file=/path/to/i.img,format=ploop,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vdi-noopts.xml:
-drive file=/path/to/i.img,format=vdi,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vhd-noopts.xml:
-drive file=/path/to/i.img,format=vhd,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
file-vpc-noopts.xml:
-drive file=/path/to/i.img,format=vpc,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Test the JSON props generator with a very simple 'raw' image with no
other options. The node-names for the image are 31 bytes long so that we
validate our node name detector.
The top level disk image would generate the following '-drive' cmdline:
-drive file=/var/lib/libvirt/images/i.img,format=raw,if=none,id=drive-dummy
-device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a test infrastructure that will allow testing the JSON object
generator used for generating data to use with blockdev-add.
The resulting disk including the backing chain is validated to conform
to the QAPI schema and the expected output files.
The first test cases make sure that libvirt will not allow nodenames
exceeding 31 chars.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove gnulib from _LDADD and move LDADDS to replace it. Also reformat
the _SOURCES so that they can be easily extended.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
New tests will add new data structures so rename the 'data' structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.
To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Save and restore node names if we know them or when we will be
generating them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have been checking whether qemu-img supports the -o compat
option by scraping the -help output.
Since we require QEMU 1.5.0 now and this option was introduced in 1.1,
assume we support it and ditch the help parsing code along with the
extra qemu-img invocation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have two leftover "capabilites" for qemu-img:
QEMU_IMG_BACKING_FORMAT_OPTIONS
QEMU_IMG_BACKING_FORMAT_OPTIONS_COMPAT
The former says we are able to specify the backing format via -o
(which has been the case for a long time now) and the second one
says we can use -o compat to specify the qcow2 version.
Since we require QEMU 1.5.0, we can always assume -o compat,
which was introduced in QEMU 1.1.
Drop the test cases using FMT_OPTIONS which have a FMT_COMPAT
counterpart to prepare for deprecating FMT_OPTIONS (and these flags)
completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.
Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.
For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Now that mocking NUMA information works on FreeBSD, there are
no longer any test cases that need to be restricted to Linux
only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the current amount of mocking works just fine on most of
our target platforms, it somehow causes issues when using Clang
on FreeBSD.
Work around the issue by mocking a couple more functions. It's
not pretty, but it makes qemuxml2argvtest pass on FreeBSD at
long last.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are only a couple remaining issues preventing it from
working on FreeBSD. Let's fix them.
With the mocking in place, qemumemlocktest and qemuxml2xmltest
can finally succeed on FreeBSD.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Clang complains about it:
error: second argument to 'va_arg' is of promotable type
'mode_t' (aka 'unsigned short'); this va_arg has undefined
behavior because arguments will be promoted to 'int'
[-Werror,-Wvarargs]
mode = va_arg(ap, mode_t);
^~~~~~
Work around the issue by passing int to va_arg() and casting
its return value to mode_t afterwards.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're using virFileCanonicalizePath() everywhere now, so
mocking this function has become entirely pointless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latter is impossible to mock on platforms that use the
gnulib implementation, such as FreeBSD, while the former
doesn't suffer from this limitation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All the code now just uses the virHashTablePtr type directly.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the virNWFilterHashTableFree, virNWFilterHashTablePut
and virNWFilterHashTableRemove methods, in favour of just calling
the virHash APIs directly.
The virNWFilterHashTablePut method was unreasonably complex because
the virHashUpdateEntry already knows how to create the entry if it
does not currently exist.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterHashTable struct only contains a single virHashTable
member since
commit 293d4fe2f1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Mar 24 16:35:23 2014 +0000
Remove pointless storage of var names in virNWFilterHashTable
Thus, this struct wrapper adds no real value over just using the
virHashTable directly, but brings the complexity of needing to derefence
the hashtable to call virHash* APIs, and adds extra memory allocation
step.
To minimize code churn this just turns virNWFilterHashTable into a
typedef aliases virHashTable.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alter qemuBuildTPMDevStr to format the tpm-crb on the command line
and use the enum range checking for valid model.
Add a test case for the formation of the tpm-crb QEMU device
command line. The qemuxml2argvtest changes cannot use the newer
DO_TEST_CAPS_LATEST since building of the command line involves
calling qemuBuildTPMBackendStr which attempts to open the
path to the device (e.g. /dev/tmp0).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU on x86_64 (since v2.12) can support tpm-crb devices.
Introduce qemu capabilities for this device.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:
<tpm model='tpm-crb'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The libxlxml2domconfigtest causes a libxl-driver.log file to be created
which breaks make distchck if libxl is enabled. Delete the log file at
the end of the test.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To allow encryption of the non-shared storage migration NBD connection
we will need to instantiated the NBD server with the TLS env.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NBD server in qemu supports TLS transport. Detect this capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The script assumed to be run in the source directory.
Pass top_srcdir as the argument to fix VPATH builds.
My commit 81a7571 broke this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce a perl script that is able to regroup both
the QEMU_CAPS constants and the capability strings.
Check correct grouping as a part of syntax check.
For in-place regrouping after a rebase, just run:
tests/group-qemu-caps.pl
without any parameters.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently the driver module loading code does not report an error if the
driver module is physically missing on disk. This is useful for distro
packaging optional pieces. When the daemons are split up into one daemon
per driver, we will expect module loading to always succeed. If a driver
is not desired, the entire daemon should not be installed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1569678
On some large systems (with ~400GB of RAM) it is possible for
unsigned int to overflow in which case we report invalid number
of 4K pages pool size. Switch to unsigned long long.
We hit overflow in virNumaGetPages when doing:
huge_page_sum += 1024 * page_size * page_avail;
because although 'huge_page_sum' is an unsigned long long, the
page_size and page_avail are both unsigned int, so the promotion
to unsigned long long doesn't happen until the sum has been
calculated, by which time we've already overflowed.
Turning page_avail into a unsigned long long is not strictly
needed until we need ability to represent more than 2^32
4k pages, which equates to 16 TB of RAM. That's not
outside the realm of possibility, so makes sense that we
change it to unsigned long long to avoid future problems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even though we just introduced the rom.enabled attribute to
properly cover the use case, there might be guests out there
that use the only previously available way of disabling PCI
ROM loading by not opting in to schema validation.
To make sure such guests will keep working going forward,
introduce a test case covering the legacy workaround.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Many of the old xm and sexpr test files used qemu-dm as the emulator.
Modern Xen systems no longer use the old, forked qemu-dm, instead
preferring the distro provided qemu or an "upstream" qemu that is
built when the Xen tools are built. This qemu is typically installed
in /usr/lib/xen/bin/qemu-system-i386.
The libxl test files already use /usr/lib/xen/bin/qemu-system-i386.
For consistency, change the old test files to use the same emulator
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When writing the VMX file from the domain XML, write
cpuid.coresPerSocket if there is a specified CPU topology in the guest.
Use the domain XML of esx-in-the-wild-9 in vmx2xml as testcase for
xml2vmxtest.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Convert the cpuid.coresPerSocket key as both number of CPU sockets, and
cores per socket.
Add the VMX file attached to RHBZ#1568148 as testcase esx-in-the-wild-9;
adapt the resulting XML of testcase esx-in-the-wild-8 to the CPU
topology present in that VMX.
https://bugzilla.redhat.com/show_bug.cgi?id=1568148
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If @client hasn't been opened, then don't call virNetServerClientClose
since that'll cause certain failure.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
If @log is not fopen'd then, going to cleanup and calling fclose
will make for an unhappy callee. So just fail immediately instead
since there's nothing to clean up.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
The current private XML parsing code relies on the assumption
that NUMA node IDs start from 0 and are densely allocated,
neither of which is necessarily the case.
Change it so that the bitmap size is dynamically calculated by
looking at NUMA node IDs instead, which ensures all nodes will
be able to fit and thus the bitmap will be parsed successfully.
Update one of the test cases so that it would fail with the
previous approach, but passes with the new one.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1490158
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
vircapstest has code to add a full host NUMA topology, that
is, one that includes all information about nodes and CPUs
including IDs; testQemuCapsInit(), which is used to create a
mock virCapsPtr for QEMU tests, however, just fakes it by
setting nnumaCell_max to some number.
While the latter approach has served us well so far, we're
going to need all the information to be filled in soon. In
order to do that, we can just move the existing code from
vircapstest to testutils and, with some renaming and
trivial tweaking, use it as-is.
Interestingly, the NUMA topology generated by the function
is rigged up so that the NUMA nodes aren't (necessarily)
numbered starting from 0, which is a nice way to spot
mistaken assumptions in our codebase.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk cache mode translates to various frontend and backend
attributes for the qemu block layer. For the frontend device the
'writeback' parameter is used and provided as 'write-cache'. Implement
this so that we can later switch to using -blockdev where we will not
pass the cachemode directly any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU translates the cache mode of a disk internally into 3 flags.
'write-cache' is a flag of the frontend while others are flag of the
backing storage. Add capability which will allow expressing it via the
frontend attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Prepare the tests for adding the new parameter. The parameter was
introduced in qemu-2.7.0, so add a forked version of the test case to
see that it is formatted properly.
This test is also an example how the new testing macros should be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow testing of XML->argv conversion with using a real capability map
as used in the qemucapabilitiestest. This allows specifying the required
qemu version with the test rather than having to enumerate all the
required capabilities or allows to use the newest capabilities present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To allow having more than one output file in the qemuxml2argvtest add a
suffix member to the testInfo struct which will allow testing the same
XML file with multiple capabilities files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The helper iterates the directory with files for the capability test and
looks up the most recent one for the given architecture. This will allow
testing against the newest qemu capabilities so that we can catch
regressions in behaviour more easily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Whenever we declare a new object the first member of the struct
has to be virObject (or any other member of that family). Now, up
until now we did not care about the name of the struct member.
But lets unify it so that we can do some checks at compile time
later.
The unified name is 'parent'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, this isn't supposed to be in angle brackets because it's
not a system header file (not that gcc distinguishes these two,
it's just guide for us developers).
Secondly, no need to use util/ path prefix because CFLAGS already
contain -I$(srcdir)/util.
The include is needed because virmocklibxl is mocking
virFileMakePath() and even when VIR_MOCK_IMPL_RET_ARGS() does
forward declaration to shut up compiler we need real
virFileMakePath() declaration so that when it changes compiler
catches mismatching declarations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Check conversion of "cpuid" setting, check all supported policy settings
("1", "0", "x"). Also, check interaction with "nestedhvm" - should not
be included as "vmx=1" in "cpuid" setting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test enabling/disabling individual CPU features and also setting
nested HVM support, which is also controlled by CPU features node.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce global libxl option for enabling nested HVM feature, similar
to kvm module parameter. This will prevent enabling experimental feature
by mere presence of <cpu mode='host-passthrough'> element in domain
config, unless explicitly enabled. <cpu mode='host-passthrough'> element
may be used to configure other features, like NUMA, or CPUID.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Preparation for global nestedhvm configuration - libxlMakeDomBuildInfo
needs access to libxlDriverConfig.
No functional change.
Adjusting tests require slightly more mockup functions, because of
libxlDriverConfigNew() call.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The s390 testcase verifies that the s390-specific cpu-state
field is correctly mapped to the halted property.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extended the json monitor test program with support for query-cpus-fast
and added a sample file set for x86 data obtained using the it.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use query-cpus-fast instead of query-cpus if supported by QEMU.
Based on the QEMU_CAPS_QUERY_CPUS_FAST capability.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Print out the halted property in the test output.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Detect whether QEMU supports the QMP query-cpus-fast API
and set QEMU_CAPS_QUERY_CPUS_FAST in this case.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
If QEMU uses a seccomp blacklist (since 2.11), -sandbox on
no longer tries to whitelist all the calls, but uses sets
of blacklists:
default (always blacklisted with -sandbox on)
obsolete (defaults to deny)
elevateprivileges (setuid & co, default: allow)
spawn (fork & execve, default: allow)
resourcecontrol (setaffinity, setscheduler, default: allow)
If these are supported, default to sandbox with all four
categories blacklisted.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU commit 1bd6152 changed the default behavior from whitelist
to blacklist and introduced a few sets of system calls.
Use the 'elevateprivileges' parameter of -sandbox as a witness
of this change.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virCaps was used only to propagate the host architecture, so the
function can be extracted in a way which does not require it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Implied by QEMU >= 1.2.0.
Delete the negative test cases now that they always pass.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This functions contains logic that tries to use vhost for virtio
interfaces, even if <driver name='vhost'/> was not supplied.
In this case, a failure is non-fatal.
On my system, /dev/vhost-net was not accessible to the user running
'make check', but we should not depend on that.
Mock it to prevent accessing /dev/vhost-net and return some predictable
file descriptor numbers instead.
Introduced by commit c1f684e - deprecate QEMU_CAPS_VHOST_NET.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jiří Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Due to conditional execution of virTestRun(), the testCounter was incremented
only if all the cases were run. When using VIR_TEST_RANGE=x-y, first x/2 of the
increments were skipped and that made figuring out a precise case a PITA.
Moving the condition into the test function makes it way nicer to find out the
test numbers to use in VIR_TEST_RANGE.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Implied by QEMU >= 1.2.0.
Also delete the now redundant disk-drive-copy-on-read test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This will help us decide what to do when libvirtd is restarted while an
async job is running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an enhanced replacement for the original test from
qemumonitorjsontest which was dropped earlier in this series. More data
files with some real data will be added in the following patches.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration capabilities parsing and formatting at one
place, i.e., in qemu_migration_params.c. The parsing is already there in
qemuMigrationCapsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is mostly useless and we want to refactor migration parameters
even further. The refactoring will allow us to introduce enhanced tests
for migration parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally QEMU provided query-migrate-cache-size and
migrate-set-cache-size QMP commands for querying/setting XBZRLE cache
size. In version 2.11 QEMU added support for XBZRLE cache size to the
general migration paramaters commands.
This patch adds support for this parameter to libvirt to make sure it is
properly restored to its original value after a failed or aborted
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rework all remaining callers of qemuMonitorSetMigrationCapability to use
the new qemuMonitorSetMigrationCapabilities API.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The (now assumed) QEMU_CAPS_CHARDEV_SPICEVMC is preferred.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Last use was removed by commit 0586cf98 deprecating
QEMU_CAPS_DEVICE.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixed-up-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All Xen PV and HVM with PV driver support a memory balloon device,
which cannot be disabled through the toolstack. Model the device
in the libxl driver, similar to the recently removed xend-based
driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Up until now we have only formatted non-default GIC versions on
the command line, in order to maintain compatibility with older
QEMU versions that didn't implement the gic-version option to
begin with; however, doing so is entirely unnecessary for newer
QEMU versions, where the option is available. Moreover, having
the GIC version formatted on the command line at all times
ensures that QEMU changing its own defaults doesn't affect the
ABI of libvirt guests.
A few test cases are removed to avoid extra churn. It doesn't
matter for coverage, as those scenarios are already covered by
other parts of the test suite.
This patch is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is the responsability of the caller to apply the correct lock
before using these functions. Moreover, the use of a simple boolean
was still racy: two threads may check the boolean and "lock" it
simultaneously.
Users of functions from src/util/virhash.c have to be checked for
correctness. Lookups and iteration should hold a RO
lock. Modifications should hold a RW lock.
Most important uses seem to be covered. Callers have now a greater
responsability, notably the ability to execute some operations while
iterating were reliably forbidden before are now accepted.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
This patch adds support to qcow2 formatted filesystem object storage by
instructing qemu-img to build them with preallocation=falloc whenever the
XML described storage <allocation> matches its <capacity>. For all other
cases the filesystem stored objects are built with preallocation=metadata.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the policy described on https://libvirt.org/platforms.html
the QEMU versions in the oldest relevant releses are:
SLES 12: 2.0.0
RHEL 7: 1.5.3
Ubuntu 14.04: 2.0.0
Set the minimum to 1.5.0 and drop support for RHEL 6.
This will let us assume lots of capabilities.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove the qmpOnly argument of virQEMUCapsNewForBinaryInternal
and instead always assume it's true.
This effectively sets the minimum QEMU version to 1.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We test the same XML for a type='kvm' domain twice, once with
QEMU_CAPS_KVM (expecting success), once without (expecting failure).
The failure case relies on QEMU_CAPS_MACHINE_OPT not being set,
failing in qemuBuildObsoleteAccelArg.
Checking a domain-type error message in a cpu test is strange.
Delete the negative test to allow assuming QEMU_CAPS_MACHINE_OPT by
default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Use QEMU_CAPS_MACHINE_OPT and QEMU_CAPS_MACHINE_VMPORT_OPT
since it specifies <vmport state=off/>.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In preparation of removing the legacy Xen driver, move the
xmconfig tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert xm config to XML. Requires fixing up the tests to account
for different behavior of Xen vs libxl post parse functions. For
consistency with other Xen config tests, change the <os> arch to
x86_64.
There is some test file fallout due to differences in handling of
default values between xend and libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation of removing the legacy Xen driver, move the
sexpr2xml tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert sexpr to XML. Requires fixing up the tests to account
for different behavior of Xen vs libxl post parse functions.
There is some test file fallout due to differences in handling
of default values between xend and libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation of removing the legacy Xen driver, move the
xml2sexpr tests from WITH_XEN to WITH_LIBXL. Even though the
legacy driver will be removed, we'll want to maintain the ability
to convert sexpr <-> XML.
There is some test file fallout due to differences in handling
of default values between xend and libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When virDomainObjParseFile runs, it returns a locked @obj with
one reference. Rather than just use virObjectUnref to clean that
up, use virObjectEndAPI.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability will be set when the pcie-pci-bridge device
is available in the QEMU binary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We store all JSON numbers as strings. To allow using json libraries
that store them in numeric types, use a more predictable and normalized
value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Similarly to 3506f1ecfd, the contents of 'cmpcontent' may be an empty
string so the following code would access memory out of the array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The qemu command line generator code set disk caching of shareable disks
to 'none' when formatting the command line silently. Move this code to a
common place when preparing the domain definition for startup so that it
does not have to be duplicated.
The new test case shows that the actual cache mode will now be recorded
in the live XML definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add a new kind of XML output test for the files in qemuxml2argvtest
where we can validate setup and defaults applied when starting up the
VM.
This is achieved by formatting of the definition processed by the
qemuxml2argvtest into a XML and it's compared against files in
qemuxml2startupxmloutdata. This test is automatically executed if the
output file is present and it's skipped otherwise.
The first example test case is created from 'disk-drive-shared' test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The function docs state that 'strcontent' may be NULL. This was added in
8b3a0b28ba but that commit neglected to fix rest of the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It was not possible to determine whether virJSONValueObjectAddVArgs and
the functions using it would consume a virJSONValue or not when used
with the 'a' or 'A' modifier depending on when the loop failed.
Fix this by passing in a pointer to the pointer so that it can be
cleared once it's successfully consumed and the callers don't have to
second-guess leaving a chance of leaking or double freeing the value
depending on the ordering.
Fix all callers to pass a double pointer too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Scan the parsed VMX file, and gather the biggest index of the network
interfaces there: this way, it is possible to parse all the available
network interfaces, instead of just 4 maximum.
Add the VMX file attached to RHBZ#1560917 as testcase esx-in-the-wild-8.
https://bugzilla.redhat.com/show_bug.cgi?id=1560917
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
When GIC support was introduced (QEMU 2.6 timeframe) we needed
to make sure both GICv2 hardware and GICv3 hardware were handled
correctly, and that was achieved by having separate capabilities
data for each.
Now that we have capabilities data for several QEMU versions we
can stop storing data for GICv2 and GICv3 hardware separately,
and instead have GICv2 data for QEMU <= 2.10 and GICv3 data for
QEMU >= 2.12, without losing any coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Test cases in qemucapabilitiestest are ordered by architecture
first, then by QEMU version. Use the same order here.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
Introduce qemu capabilities for these devices.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support the virtio-gpu-ccw device,
which can be used as a video device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1558317
Similarly to b133fac356 we need to look up alias of CCID
controller when constructing smartcard command line instead of
relying on broken assumption it will always be 'ccid0'. After
user aliases it can be anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'simple' monitor tests were quite useless, since the code did not
even check whether the correct command was called.
This patch uses the QAPI schema validator to validate that the arguments
are in format according to the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add infrastructure that will allow testing schema of the commands we
pass to the fake monitor object, so that we can make sure that it
actually does something.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Prepare for testing of the schema of used commands by changing few
arguments to values which will not be rejected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Ján Tomko