Export 'virDomainMomentObjNew' and 'virDomainMomentObjFree' and define
the latter as autoptr cleanup function for 'virDomainMomentObj'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format the function prototypes the same way as in the .c file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently virProcessGetStatInfo() always returns success and only logs error
when it is unable to parse the data. Make this function actually report the
error and return a negative value in this error scenario.
Fix the callers so that they do not override the error generated.
Also fix non-linux implementation of this function so as to report error.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virConnectOpenAuth() calls virConnectOpenInternal(). This later function
generates fine grained errors arising from various failure conditions that are
more accurate than a "catch all" broader VIR_ERR_OPERATION_FAILED error that
the callers of this function generates. Remove the broader error so that more
specific errors can be caught and processed.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a few glib functions that abort on OOM and thus there's
no point in checking their retval against NULL. Nevertheless, we
do have those checks in a few places. Remove them.
Generated using the following spatch:
@@
expression x;
identifier n;
expression r;
@@
(
x = g_strdup_printf(...);
| x = g_strdup_vprintf(...);
| x = g_strdup(...);
| x = g_strndup(...);
| x = g_new0(...);
| x = g_realloc(...);
)
... when != x
- if(!x)
(
- return r;
|
- goto n;
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virProcessGetStatInfo() and virProcessGetSchedInfo() are
Linux centric. Provide stubs for non-Linux platforms.
Fixes: d73852c499
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c7f3a1f787 turned qemuDomainMachineNeedsFDC() effectively into
qemuDomainIsQ35. Use it instead as it also matches the non-canonicalized
'q35'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the fd-passing setup of chardevs which this hack meant to disable
was moved to the host-preparation phase which is skipped for formatting
of non-real commandlines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virURIParamAppend() unconditionally returns 0. Simplify and make the return type
as void type.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add domainGetVcpuPinInfo and nodeGetCPUMap callbacks to ch driver
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move qemuGetProcessInfo and qemuGetSchedInfo methods to util and share them
with ch driver.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This change adds the domain name in the error and debug logs during
monitor IO processing so that we may infer which VM experienced
errors such as IO or socket hangup. This may help in debugging
monitor IO errors.
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
DEBUG_IO and DEBUG_RAW_IO are disabled and hence the code #defined under them
are useless. Remove them.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places (e.g. device attach/detach/update) we are given a
device XML, parse it but then need a copy of parsed data so that
the original can be passed to function handling the request over
inactive XML and the copy is then passed to function handling the
operation over live XML. Note, both functions consume passed
device on success, hence the need for copy.
The problem is in combination of how the copy is obtained and
where is passed. The copy is done by calling
virDomainDeviceDefCopy() which does only inactive copy, i.e. no
live information is copied over (e.g. no aliases).
Then, this copy (inactive XML effectively) is passed to function
handling live part of the operation (e.g.
qemuDomainUpdateDeviceLive()) and the definition containing all
the juicy, live bits is passed to function handling inactive part
of the operation (e.g. qemuDomainUpdateDeviceConfig()).
This is rather incorrect, and XML copies should be passed to
their respective functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2036895
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There is no need to do that since both fallible functions do that already.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Callers that already do this anyway can be cleaned up thanks to this and the one
that does not (daemon startup) gains the benefit of the error being printed to
standard error output changing:
LIBVIRT_LOG_OUTPUTS=1:invalid libvirtd
/home/nert/dev/libvirt/upstream/build/src/libvirtd: initialisation failed
into:
LIBVIRT_LOG_OUTPUTS=1:invalid libvirtd
libvirt: error : invalid argument: Invalid destination 'invalid' for output '1:invalid'
/home/nert/dev/libvirt/upstream/build/src/libvirtd: initialisation failed
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
And make callers check the return value as well. This helps error out early for
invalid environment variables.
That is desirable because it could lead to deadlocks. This can happen when
resetting logging after fork() reports translated errors because gettext
functions are not reentrant. Well, it is not limited to resetting logging after
fork(), it can be any translation at that phase, but parsing environment
variables is easy to make fail on purpose to show the result, it can also happen
just due to a typo.
Before this commit it is possible to deadlock the daemon on startup
with something like:
LIBVIRT_LOG_FILTERS='1:*' LIBVIRT_LOG_OUTPUTS=1:stdout libvirtd
where filters are used to enable more logging and hence make the race less rare
and outputs are set to invalid
Combined with the previous patches this changes
the following from:
...
<deadlock>
to:
...
libvirtd: initialisation failed
The error message is improved in future commits and is also possible thanks to
this patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This prevents starting any daemons with improper logging settings. This is
desirable on its own, but will be even more beneficial when more functions start
reporting errors and failing on them, coming up in following patches
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The only difference is that we are not going to be guaranteed that the mutex is
normal (as opposed to recursive, although there is no system known to me that
would default to recursive mutexes), but that was done only to find occasional
errors (during runtime, back in 2010, commit 336fd879c0). Functions using
this mutex are mostly stable and unchanging, and it makes the virLogOnceInit()
function only return 0 (or possibly abort in glib calls). On top of that we can
assume that the virLogMutex is always initialized which enables us to be more
consistent in some early error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'sev-inject-launch-secret' qmp command is only available with
qemu >= 6.0.0. Introduce a capability for sev-inject-launch-secret.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This API allows setting a launch secret within a guests's memory. The
launch secret is created by the guest owner after retrieving and
verifying the launch measurement with virDomainGetLaunchSecurityInfo.
The API uses virTypedParameter for input, allowing it to be expanded
to support other confidential computing technologies. In the case of
SEV, a basic guest launch workflow is described in the SEV API spec
in section "1.3.1 Launch"
https://www.amd.com/system/files/TechDocs/55766_SEV-KM_API_Specification.pdf
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As described in the previous commit, the units for 'burst' are
kibibytes and not kilobytes, i.e. multiples of 1024 not 1000.
Therefore, when constructing ovs-vsctl command the burst value
must be multiplied by 1024 and not just 1000. And because ovs
expects this size in bits the value has to be multiplied again by
8.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1510237#c26
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The burst attribute for bandwidth specifies how much bytes can be
transmitted in a single burst. Therefore, the unit is in
multiples of 1024 (thus kibibytes) not SI-like 1000. It has
always been like that.
The 'tc' output is still confusing though, for instance:
# tc class add dev $DEV parent 1: classid 1:1 htb rate 1000kbps burst 2097152
# tc class show dev vnet2
class htb 1:1 root rate 8Mbit ceil 8Mbit burst 2Mb cburst 1600b
Please note that 2097152 = 2*1024*1024. Even the man page is
confusing. From tc(8):
kb or k Kilobytes
mb or m Megabytes
But I guess this is because 'tc' predates IEC standardisation of
binary multiples and thus can't change without breaking scripts
parsing its output.
And while at it, adjust _virNetDevBandwidthRate struct member
description, to make it obvious which members use SI/IEC units.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are few places in virDomainDefFormatFeatures() which can
use virXMLFormatElement() or virXMLFormatElementEmpty() instead
of writing directly into the output buffer.
After this, there are still a lot of places left, but that is
much bigger task.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
According to ioctl_ficlonerange(2)
These ioctl operations [FICLONE and FICLONERANGE] first
appeared in Linux 4.5. They were previously known as
BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE, and were private
to Btrfs.
We no longer target any distro that comes with a kernel older
than 4.5, so we can stop looking for the btrfs and xfs
specific versions of the constant and just use the generic
version directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virt_socket_lib is built from virnetsocket.c (among others).
But this file includes virprobe.h which includes libvirt_probes.h
which is a generated file. But this dependency is not recorded in
meson which may lead to a failed build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainTPMDefFormat() function can't fail really. There's
no point in it returning an integer then. Make it return void and
fix both places which check for its retval.
And while at it, turn @def into a const pointer to make it
obvious the function does not modify passed struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <tpm/> element formatting is handled in
virDomainTPMDefFormat() which uses the "old style" - appending
strings directly into the output buffer. With this, it's easy to
get conditions that tell when an element has ended wrong. In this
particular case, if both <encryption/> and <active_pcr_banks/>
are to be formatted the current code puts a stray '>' into the
output buffer, resulting in invalid XML.
Rewrite the function to use virXMLFormatElement() which is more
clever.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2016599#c15
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Changing <active_pcr_banks/> means changing the guest ABI and as
such must be prevented on both restoring from a file or
migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035888
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new helper replaces the 'value' part of the key-value tuple in an
object. The advantage of this new helper is that it preserves the
ordering of the key in the object when compared to a combination of
stealing the old key and adding a new value. This will be needed for a
new test/helper for validating and modifying qemu capabilities data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need libparted to be available at build time otherwise we
can't link against it; we don't, however, need the parted
command to be present until runtime and, just as is the case
for other commands, we already perform a lookup through the
virCommand API so making sure it's available at build time
is unnecessary.
This doesn't make any difference for platform such as Fedora
and CentOS, where both the library and the command are in the
same package, but others like Debian, Ubuntu and openSUSE
have separate packages for the two components and this change
means that we can install one less package at build time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As encryption norms get more strict it's easy to fall on the
insecure side. For instance, so far we are generating 2048 bits
long prime for Diffie-Hellman keys. Some systems consider this
not long enough. While we may just keep increasing the value
passed to the corresponding gnutls_* function, that is not well
maintainable. Instead, we may do what's recommended in the
gnutls_* manpage. From gnutls_dh_params_generate2(3):
It is recommended not to set the number of bits directly, but
use gnutls_sec_param_to_pk_bits() instead.
Looking into the gnutls_sec_param_to_pk_bits() then [1], 2048
bits corresponds to parameter MEDIUM.
1: https://www.gnutls.org/manual/gnutls.html#tab_003akey_002dsizes
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to the gnutls_dh_set_prime_bits() manpage:
The function has no effect in server side.
Therefore, don't call it when creating server side context.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If needed 'virJSONValueIsNull' can be easily replaced by
'virJSONValueGetType(obj) == VIR_JSON_TYPE_NULL'.
'virJSONValueObjectIsNull' has confusing name because it checks that a
virJSONValue of OBJECT type has a key which is NULL, not that the object
itself is NULL. This can be replaced according to the needs e.g. by
virJSONValueObjectHasKey or the above check.
Both are unused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Peter Krempa