https://bugzilla.redhat.com/show_bug.cgi?id=1044806
Currently, sending the ANSI_A keycode from os_x codepage doesn't work as
it has a special value of 0x0. Our internal code handles that no
different to other not defined keycodes. Hence, in order to allow it we
must change all the undefined keycodes from 0 to -1 and adapt some code
too.
# virsh send-key guestname --codeset os_x ANSI_A
error: invalid keycode: 'ANSI_A'
# virsh send-key guestname --codeset os_x ANSI_B
# virsh send-key guestname --codeset os_x ANSI_C
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the @flags usage is a bit unclear at first sight to say the
least. There's no need for such unclear code especially when we can
borrow the working code from qemuDomainShutdownFlags().
In addition, this fixes one bug too. If user requested both
VIR_DOMAIN_SHUTDOWN_INITCTL and VIR_DOMAIN_SHUTDOWN_SIGNAL at the same
time, he is basically saying: 'Use the force Luke! If initctl fails try
sending a signal.' But with the current code we don't do that. If
initctl fails for some reason (e.g. inability to write to /dev/initctl)
we don't try sending any signal but fail immediately. To make things
worse, making a domain shutdown with bare _SIGNAL was working by blind
chance of a @rc variable being placed at correct place on the stack so
its initial value was zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=956994
Currently, it is possible to start an interface that is already running:
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
Same applies for destroying a dead interface. We should not allow such
state transitions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When registering a close callback, the connection refcount is increased
as the connection object is passed to the callback and hence we must
prevent deleting it too soon. However, when closing the connection, the
connection object is just unrefed. So whenever a connection with a close
callback is closed, we end up with the connection object which has
exactly one reference. Leaving the code as-is doesn't mean the end of
the world as we know it, but why give a bad example?
==14531== 288 bytes in 1 blocks are still reachable in loss record 695 of 762
==14531== at 0x4C2BDE4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==14531== by 0x4E9FE09: virAllocVar (viralloc.c:558)
==14531== by 0x4EDBE45: virObjectNew (virobject.c:190)
==14531== by 0x4F71AAC: virGetConnect (datatypes.c:116)
==14531== by 0x4F78511: do_open (libvirt.c:1136)
==14531== by 0x4F7B3AC: virConnectOpenAuth (libvirt.c:1481)
==14531== by 0x4011D2: main (event-test.c:499)
(and other leaks tied to virGetConnect())
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This partially reverts 5eb4b04211 and 62774afb6b.
Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By actually removing the <vcpupin> element (from within the
<cputune> section) from the XML, rather than jus update it with
a fully set vcpu affinity mask.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
And use it to implement libxlDomainPinVcpu(), similarly to what
happens in the QEMU driver. This way, it is possible to both
query and change the vcpu affinity of a persistent but not
running domain.
In face, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpupin fedora20_64 0 2-4 --current
error: this function is not supported by the connection driver: virDomainPinVcpuFlags
After (same situation as above):
# virsh vcpupin fedora20_64 0 2-4 --current
# virsh vcpupin fedora20_64 0
VCPU: CPU Affinity
----------------------------------
0: 2-4
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
So that it is possible to query vcpu related information of
a persistent but not running domain, like it is for the QEMU
driver.
In fact, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpuinfo fedora20_64
error: this function is not supported by the connection driver: virDomainGetVcpuPinInfo
After (same situation as above, i.e., fedora20_64 not running):
# virsh vcpuinfo fedora20_64
VCPU: 0
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
VCPU: 1
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
I noticed a few odd things in 'virt-login-shell --help' output.
* tools/virt-login-shell.c (usage): At most one option accepted,
drop trailing colon.
Signed-off-by: Eric Blake <eblake@redhat.com>
On openSUSE 12.x with GNUTLS 3.0.28, virnettlscontexttest fails. It has
been reported to work from GNUTLS 3.1.11 on Fedora 19. Changed the
constraints on gnutls to 3.1+ for unit test cacert4req.
Signed-off-by: Eric Blake <eblake@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1045002
If a domain has an <interface type='hostdev'> or an <interface
type='network'> where the network itself is a pool of hostdev devices,
then libvirt will internally keep that device on both the interface
list *and* the hostdev list for the domain. One of the places this
comes in handy is when a new device is being added and libvirt wants
to find a unique "alias" name for it - it just scans through the
hostdev array and makes sure it picks a name that doesn't match the
alias of any device in that array.
However, when libvirtd was restarted, if there was an <interface
type='network'> with the network being a hostdev pool, the device
would not be added to the reconstructed internal hostdev array, so its
alias would not be found during a scan of the hostdev array, thus
attempts to add a new hostdev (or <interface type='hostdev'> or
<interface type='network'>) would result in a message like this:
internal error: unable to execute QEMU command 'device_add':
Duplicate ID 'hostdev0' for device
This patch simply fixes the existing code in the domain XML parser
that fixes up the hostdev array in the case of <interface
type='hostdev'> to do the same thing in the case of <interface
type='network'> with a hostdev network.
This bug has existed since the very first addition of hostdev networks
to libvirt (0.10.0).
This eliminates the misleading error message that was being logged
when a vfio hostdev hotplug failed:
error: unable to set user and group to '107:107' on '/dev/vfio/22':
No such file or directory
as documented in:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
Commit ee414b5d (pushed as a fix for Bug 1016511 and part of Bug
1025108) replaced the single call to
virSecurityManagerSetHostdevLabel() in qemuDomainAttachHostDevice()
with individual calls to that same function in each
device-type-specific attach function (for PCI, USB, and SCSI). It also
added a corresponding call to virSecurityManagerRestoreHostdevLabel()
in the error handling of the device-type-specific functions, but
forgot to remove the common call to that from
qemuDomainAttachHostDevice() - this resulted in a duplicate call to
virSecurityManagerRestoreHostdevLabel(), with the second occurrence
being after (e.g.) a PCI device has already been re-attached to the
host driver, thus destroying some of the device nodes / links that we
then attempted to re-label (e.f. /dev/vfio/22) and generating an error
log that obscured the original error.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
virProcessSetMaxMemLock() (which is a wrapper over prlimit(3)) expects
the memory size in bytes, but libvirt's domain definition (which was
being used by qemuDomainAttachHostPciDevice()) stores all memory
tuning parameters in KiB. This was being accounted for when setting
MaxMemLock at domain startup time (so cold-plugged devices would
work), but not for hotplug.
This patch simplifies the few lines that call
virProcessSetMemMaxLock(), and multiply the amount * 1024 so that
we're locking the correct amount of memory.
What remains a mystery to me is why hot-plug of a managed='no' device
would succeed (at least on my system) while managed='yes' would
fail. I guess in one case the memory was coincidentally already
resident and in the other it wasn't.
there is a segfault in libxl logging in libxl_ctx_free when domain
create fail. because the log output handler vmessage is freed by
xtl_logger_destroy before libxl_ctx_free in virDomainObjListRemove.
move xtl_logger_destroy after libxl_ctx_free could fix this bug.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:
# ./daemon/libvirtd -v
*** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
/lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
/home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
/home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
/lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
/lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: Dario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain> --hard-limit 133T'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
#1 0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
at util/vircgroup.c:669
#2 0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
#3 0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
#4 0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
at util/vircgroup.c:1944
#5 0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
#6 0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
#7 0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
at remote_dispatch.h:7621
#8 0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
ret=0x7fffe40b84f0) at remote_dispatch.h:7591
#9 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:435
#10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:305
#11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
#12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain>'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
#1 0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
#2 0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
#3 0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
at util/vircgroup.c:1962
#4 0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
#5 0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
#6 0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote.c:1895
#7 0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote_dispatch.h:4050
#8 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:435
#9 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:305
#10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
#11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While looking at event code, I noticed that the documentation was
trying to refer me to functions that don't exist. Also fix some
typos and poor formatting.
* src/libvirt.c (virConnectDomainEventDeregister)
(virConnectDomainEventRegisterAny)
(virConnectDomainEventDeregisterAny)
(virConnectNetworkEventRegisterAny)
(virConnectNetworkEventDeregisterAny): Link to correct function.
* include/libvirt.h.in (VIR_DOMAIN_EVENT_CALLBACK)
(VIR_NETWORK_EVENT_CALLBACK): Likewise.
(virDomainEventID, virConnectDomainEventGenericCallback)
(virNetworkEventID, virConnectNetworkEventGenericCallback):
Improve docs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 6cd60b6 was flat out broken - it tried to print into the
wrong variable. My testing was obviously too cursory (did the
name get a slash added?); valgrind would have caught the error.
Thankfully it didn't hit any release.
Reported by Peter Krempa.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Fix bogus code.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_WARNINGS_NO_CAST_ALIGN / VIR_WARNINGS_RESET should
not have any trailing ';' since they are pragmas. The use
of a ';' results in an empty statement which confuses CIL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
D-bus introduced some changes in its locking code. Overriding the init
function skips the new locking init and thus crashes later in libvirt
test. Removing the function makes the test pass again.
Move the code around so that the forward declaration isn't needed. Also
fix code style of the opening brace of the function by moving it to a
separate line.
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.
This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
Old versions of CIL did not understand the 'bool' data type,
but at least 1.7.3 does now cope. We can remove the old hack
which redefined bool and no longer compiles successfully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virDBusAddWatch does
virEventAddHandle(fd, flags,
virDBusWatchCallback,
watch, NULL);
dbus_watch_set_data(watch, info, virDBusWatchFree);
Unfortunately this is racy - since the event loop is in a
different thread, the virDBusWatchCallback method may be
run before we get to calling dbus_watch_set_data. We must
reverse the order of these calls
See https://bugzilla.redhat.com/show_bug.cgi?id=885445
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Starting from commit 2e82c18c in Xen (will be included in Xen 4.4)
both libxl_get_max_cpus() and libxl_get_max_nodes() start returning
a proper libxl error code, in case of failure. This patch fixes
this in the libxl driver.
Note that, although it is now basically impossible for them to return
0, that would, theoretically, still be wrong. Also, checking that the
returned value is '<= 0' makes the code correct for both Xen 4.4 and
Xen 4.3 (and 4.2), and that is why we go for it (rather than
just '< 0').
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1044445
When undefining a VM with storage the man page doesn't explicitly
mention that the volumes need to be a part of the storage pool otherwise
it won't work.
On a system that is enforcing FIPS, most libraries honor the
current mode by default. Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux. So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting. Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).
The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our option '--with-test-suite' could have never worked since it was
defined as AC_ARG_ENABLE([with-test-suite], ...), thus working only as
'--enable-with-test-suite', but documented in configure.ac as
AC_HELP_STRING([--with-test-suite], ...).
In my opinion, the help string is as it should be, but the option is
wrong.
The option has been broken since the introduction in commit 3a2fc27.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.
http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, 'vol-resize --allocate' allocates new space at the
vol->capacity offset. But the vol->capacity is not necessarily the same
as vol->allocation. For instance:.
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 1.00 GiB 1.00 GiB
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 2G
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 2.00 GiB 1.00 GiB
So, if we want to allocate more bytes, so the file is say 3G big, the
real allocated size is 2G actually:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 2.00 GiB
This commit uses the correct vol->allocation instead of incorrect
vol->capacity, so the output of the commands above looks like this:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 3.00 GiB
Moreover, if the '--alocate' flag was used, we must update the
vol->allocation member in storageVolResize API too, not just
vol->capacity.
Reported-by: Wang Sen <wangsen@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
vmx/vmx.c ignores the transient attribute on the disk xml format. This patch
adds a 1-1 relationship between it and [disk].mode = "independent-nonpersistent".
The other modes are ignored as before. It works in my testing.
https://bugzilla.redhat.com/show_bug.cgi?id=1044023
Signed-off-by: Eric Blake <eblake@redhat.com>
As the python generator scripts are written in python2,
the ./configure script must check for python2 before checking for python
otherwise, on platforms where both python2 and python3 are available and
on which the default python points to python3, ./configure will try to use
the wrong one.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr.eu.org>
Commit ff76566 moved around things in the specfiles to put
driver-specific files into their appropriate sub-packages (when
with_driver_modules == 1), but accidentally changed things so that the
deamon-driver-network and daemon-config-network files were only
included in a package when with_driver_modules == 0. This broke "make
rpm" on fedora (where with_driver_modules == 1).
This patch follows the pattern (already used for the files in other
sub-modules) of duplicating the files for the main package
(!with_driver_modules) and the sub-package (with_driver_modules).
The event namespace concept is mostly redundant information.
With the re-written dispatcher, the namespace is only used
for equality comparisons between event IDs. This can be solved
by just comparing virClassPtr instances instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of having the object event code have to know about each
type of event and their dispatch functions, associate a dispatch
function with the object instance. The dispatch code can thus be
significantly simplified.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Inject a virNetworkEvent class between virObjectEvent
and virNetworkEventLifecycle to mirror virDomainEvent.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While the public API & wire protocol included the 'detail'
arg for network lifecycle events, the internal event handling
code did not process it. This meant that if a future libvirtd
server starts sending non-0 'detail' args, the current libvirt
client will not process them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The domain events demo program isn't really tied to domain
events anymore, so rename it to object events.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While running objecteventtest, it was found that valgrind pointed out the
following memory leak:
==13464== 5 bytes in 1 blocks are definitely lost in loss record 7 of 134
==13464== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==13464== by 0x341F485E21: strdup (strdup.c:42)
==13464== by 0x4CAE28F: virStrdup (virstring.c:554)
==13464== by 0x4CF3CBE: virObjectEventCallbackListAddID (object_event.c:286)
==13464== by 0x4CF49CA: virObjectEventStateRegisterID (object_event.c:729)
==13464== by 0x4CF73FE: virDomainEventStateRegisterID (domain_event.c:1424)
==13464== by 0x4D7358F: testConnectDomainEventRegisterAny (test_driver.c:6032)
==13464== by 0x4D600C8: virConnectDomainEventRegisterAny (libvirt.c:19128)
==13464== by 0x402409: testDomainStartStopEvent (objecteventtest.c:232)
==13464== by 0x403451: virtTestRun (testutils.c:138)
==13464== by 0x402012: mymain (objecteventtest.c:395)
==13464== by 0x403AF2: virtTestMain (testutils.c:593)
==13464==
Michal Privoznik