Since the NPIV machine is not easy to get, it's very likely to
introduce regressions when doing changes on the existing code.
This patch dumps part of the sysfs files (the necessary ones)
of fc_host as test input data, to test the related util functions.
It could be extended for more fc_host related testing in future.
Add a test case which exercises the virFDStreamOpenFile
and virFDStreamCreateFile methods. Ensure that both the
synchronous and non-blocking iohelper code paths work.
This validates the regression recently fixed which
broke reading in non-blocking mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.
Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To prevent confusion with configure's popular name
for a file, rename conftest.c to test_conf.c which
is consistent with the invoking test_conf.sh
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On RHEL 5, 'make check' included failures such as:
TEST: virstoragetest
unable to create directory /virstoragedata/sub
unable to return to correct directory, refusing to clean up /virstoragedata
It turns out that with automake 1.9.x, $(abs_builddir) is not
automatically provided. We have previously worked around this
by using `pwd` before, but because we did not do it everywhere,
we had a number of broken tests.
This patch brings RHEL 5 from 8 failed tests down to 5 (the
remaining failures may be due to bugs in the older libxml2 and
RNG schema validation available in RHEL 5, so I'm not sure if
they can be fixed in libvirt, but I'm still investigating).
* tests/Makefile.am (AM_CFLAGS): Reliably set abs_builddir.
(*_la_CFLAGS): Factor out common settings; delete when nothing
remains to be added.
Testing our backing chain handling will make it much easier to
ensure that we avoid issues in the future. If only I had written
this test before I first caused several regressions...
* tests/virstoragetest.c: New test.
* tests/Makefile.am (test_programs): Build it.
* .gitignore: Ignore new files.
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.
The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed. Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later. But for now, a macro worked.
* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Test cases for virSysinfoRead. Initially, there are tests for
x86 (DMI based) and s390 (/proc/... based).
In lack of PPC data, I have stubbed out the test for it, but it
can be added with a minimal effort.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch changes how parameters are passed to dnsmasq. Instead of
being on the command line, the parameters are put into a file (one
parameter per line) and a commandline --conf-file= specifies the
location of the file. The file is located in the same directory as
the leases file.
Putting the dnsmasq parameters into a configuration file
allows them to be examined and more easily understood than
examining the command lines displayed by "ps ax". This is
especially true when a number of networks have been started.
When the use of dnsmasq was originally done, the required command line
was simple, but it has gotten more complicated over time and will
likely become even more complicated in the future.
Note: The test conf files have all been renamed .conf instead of
.argv, and tests/networkxml2xmlargvdata was moved to
tests/networkxml2xmlconfdata.
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **
There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.
Make has a builtin operator 'undefine', and coupled with latest
automake.git, this test name ended up confusing make into thinking
the file name was meant to be used as the make operator. Renaming
the file avoids the confusion.
* tests/undefine: Rename...
* tests/virsh-undefine: ...to this.
* tests/Makefile.am (test_scripts): Use new name.
Reported by Jim Meyering.
Take advantage of the previously added monitor helpers to
create a test suite for the QEMU JSON monitor impl. As a
proof of concept, this tests the 'qemuMonitorGetStatus'
implementation
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able to test the QEMU monitor code, we need to have a fake
QEMU monitor server. This introduces a simple (dumb) framework
that can do this. The test case registers a series of items to
be sent back as replies to commands that will be executed. A
thread runs the event loop looking for incoming replies and
sending back this pre-registered data. This allows testing all
QEMU monitor code that deals with parsing responses and errors
from QEMU, without needing QEMU around
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:
CCLD storagebackendsheepdogtest
*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!
* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.
This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Occasionally some test cases will (accidentally) try to spawn
libvirtd. Set the LIBVIRT_AUTOSTART=0 environment variable to
ensure the remote driver never tries autostart.
make rpm was failing with the following error:
Entering directory `/home/laine/devel/libvirt/tests'
make[2]: *** No rule to make target `viratomicdata.h',
needed by `distdir'. Stop.
viratomicdata.h is listed in tests/Makefile.am as a dependency of
viratomictest, but doesn't exist, is never referenced, and removing
that dependency permits make rpm to complete successfully.
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.
This reverts commit ec5b7bd2ec and most of
aae5cfb699.
This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
There are a few issues with the current virAtomic APIs
- They require use of a virAtomicInt struct instead of a plain
int type
- Several of the methods do not implement memory barriers
- The methods do not implement compiler re-ordering barriers
- There is no Win32 native impl
The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.
* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
ops
* tests/viratomictest.c: Test validate to validate safety
of atomic ops.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The nwfilter and secrets drivers are both stateful and are already
linked directly to libvirtd. Linking them to libvirt.so is thus
wrong, likewise exporting their symbols in libvirt.so is wrong
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:
CCLD networkxml2argvtest
*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!
Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.
Based on a suggestion by Daniel P. Berrange.
* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.
Libtool supports linking directly against .o files on some platforms
(such as Linux), which happens to be the only place where we are
actually doing that (for the dtrace-generated probes.o files). However,
it raises a big stink about the non-portability, even though we don't
attempt it on platforms where it would actually fail:
CCLD libvirt_driver_qemu.la
*** Warning: Linking the shared library libvirt_driver_qemu.la against
the non-libtool
*** objects libvirt_qemu_probes.o is not portable!
This shuts libtool up by creating a proper .lo file that matches
what libtool normally expects.
* src/Makefile.am (%_probes.lo): New rule.
(libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into...
(%_probes.stp): ...shorter rule.
(CLEANFILES): Clean new .lo files.
(libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD)
(libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file.
* tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.
To ensure all symbols used by loadable driver modules are
exported in libvirt.so, add a test suite that simply loads
each driver in turn
* tests/Makefile.am, tests/virdrivermoduletest.c: Add
a test case for loading drivers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it
* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
in probes.d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist
* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
by test suite
We only know -lpthread exists on platforms where we build
threads-pthread.c; but when we build threads-win32.c, LIB_PTHREAD
is empty.
* tests/Makefile.am (shunloadtest_LDADD): Use correct library.
On cygwin, <rpc/rpc.h> lives in a different directory than
/usr/include, so anything that uses it must modify CFLAGS. This
previously tripped up just 'make check', but now that we build
all test programs unconditionally, it also trips up 'make'.
* tests/Makefile.am (virnetmessagetest_CFLAGS): Find rpc headers.
The daemon-conf test script continues to be very fragile to
changes in libvirt. It currently fails 1 time in 3/4 due
to race conditions in startup/shutdown of the test script.
Replace it with a proper test case tailored to the code
being tested
* tests/Makefile.am: Remove daemon-conf, add libvirtdconftest
* tests/daemon-conf: Delete obsolete test
* tests/libvirtdconftest.c: Test config file handling
Add a new flag '--with-test-suite' to configure to control whether
the test suite binaries are built by default. ie built with a
plain 'make', as opposed to delayed until 'make check'
For builds from tar.gz tests will not be built by default. For
builds from GIT, tests with be on by default, to try and ensure
that patch developers don't accidentally break the test suites
without noticing.
* configure.ac: Add --with-test-suite
* tests/Makefile.am: Use noinst_PROGRAMS instead of check_PROGRAMS
if building tests by default. Consolidate setting of TESTS and
{noinst,check}_PROGRAMS to avoid duplication
Pass argv to the init binary of LXC, using a new <initarg> element.
* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
tests/lxcxml2xmltest.c, tests/testutilslxc.c,
tests/testutilslxc.h: Test parsing/formatting of LXC related
XML parts
Otherwise, 'make check' breaks since commit bc1ff160 deleted
qparams.h. A later patch will ensure that viruri takes over
what qparams used to do.
* tests/qparamtest.c (mymain): Delete, now that we have viruri.
* tests/Makefile.am (check_PROGRAMS, TESTS, qparamtest_SOURCES):
Delete old test.
* .gitignore: Add recent test additions.
Ján Tomko