Refactor the code to parse the vcpupin in a similar way the iothreadpin
code is now structured. This allows to get rid of some very strange
conditions and error messages.
Additionally since a existing bug
( https://bugzilla.redhat.com/show_bug.cgi?id=1208434 ) allows to add
vcpupin definitions for vcpus that don't exist, this patch makes the
parser to ignore all vcpupins that don't have a matching vCPU in the
definition rather than just offlined ones.
Defining a domain with the following config:
<domain ...>
...
<iothreads>1</iothreads>
<cputune>
<iothreadpin cpuset='1'/>
will result in the following config formatted back:
<domain type='kvm'>
...
<iothreads>1</iothreads>
<cputune>
<iothreadpin iothread='0' cpuset='1'/>
After restart the VM would vanish. Since our schema requires the
@iothread field to be present in <iothreadpin> make it required by the
code too.
When creating a snapshot with _REUSE_EXTERNAL when the pre-created image
does not directly link to the current active layer libvirt would
re-detect the backing chain incorrectly and it would not match with
qemu's view. Since the configuration is an operator mistake, document
that only the top layer image gets inserted.
Use virBitmapDataToString instead of constructing the ranges bit
by bit, remove the checking of parameters (that is already done
by the callers).
Let the callers choose the right bitmap, since there's only
one that uses this helper on a matrix-in-an-array.
Parallels Cloud Server supports block devices and virtual NIC
live attachment. I implemented that function for block devices so
OpenStack volume attachment is now works.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
On arm, we probe for virtio-*-pci devices, but use their
virtio-*-device variants.
Set the capabilities based on the -device variants as well,
to make them work with qemus with the PCI devices compiled out.
When pre-creating storage for domains, we need to find corresponding
disk in the XML on the destination (domain XML may differ there, e.g.
disk is accessible under different path). For better debugging, I'm
printing all info I received on a disk. But there was a typo when
printing the disk capacity: "%lluu" instead of "%llu".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The problem with the previous implementation is,
even when qemuMigrationUpdateJobStatus() detects a migration job
has completed, it will do a sleep for 50 ms (which is unnecessary
and only adds up to the VM pause time).
Signed-off-by: Xing Lin <xinglin@cs.utah.edu>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the adding of pindef for the vcpu and the pinning of the
thread into their own APIs.
Add static virNetDevGetifaddrsAddress to attempt to get the interface
IP address. If getifaddrs is not supported, fall back to
virNetDevGetIPv4AddressIoctl to get the IP address.
This allows IPv6 addresses to be used for <listen type='network>
with device-backed networks.
https://bugzilla.redhat.com/show_bug.cgi?id=1192318
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PCS doesn't store domain config in managed save state file.
It's forbidden to change config for VMs in this state.
It's possible to change config for containers, but after
restoring domain will have that new config, not a config,
which domain had at the moment of virDomainManagedSave.
So we need to handle this case differently from other states.
Let's forbid this operation, if config is changed and if it's
not changed - just do nothing.
Openstack/nova calls virDomainDefineXML on resume with
current domain config, so we can't forbid this operation
in managed save state.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We should add input devices with proper bus,
not VIR_DOMAIN_INPUT_BUS_XEN.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Handle input devices in virDomainDefParseXML properly
in case of parallels containers and VMs.
Parallels containers support only
VIR_DOMAIN_INPUT_BUS_PARALLELS. And if VNC is enabled
we should add implicit mouse and keyboard.
For VMs we should add implicit PS/2 mouse and
keyboard.
BTW, is it worth to refactor code and move
all this code to drivers, to *DomainDefPostParse
functions?
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add VIR_DOMAIN_INPUT_BUS_PARALLELS device type
to handle domain configuration properly for
parallels containers, when VNC is enabled.
When domain configuration has at least one
'graphics', there should be mouse and keyboard.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Fix function virDomainVideoDefaultType for
parallels VMs and containers. It should return
VGA for VMs and VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for containers.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Network adapter model has no sense for container,
so we shouldn't set it to e1000 in
parallelsDomainDeviceDefPostParse.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We handle this parameter for VMs while defining
domains, so let's get this property from PCS and
set corresponding field of virDomainNetDef in
prlsdkLoadDomains function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Call virDomainDefAddImplicitControllers to add disk
controllers, so virDomainDef, filled by this function
will look exactly like the one returned by virDomainDefParseString.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement virDomainManagedSave api function. In PCS
this feature called "suspend". You can suspend VM or
CT while it is in running or paused state. And after
resuming (or starting) it will have the same state, as
before suspend.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Split function prlsdkDomainChangeState into
prlsdkDomainChangeStateLocked and prlsdkDomainChangeState.
So it can be used from places, where virDomainObj already
found and locked.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return value of functions prlsdkStart/Kill/Stop e.t.c.
is PRL_RESULT in parallels_sdk.c and int in parallels_sdk.h.
PRL_RESULT is int, so compiler didn't report errors.
Let's fix the difference.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize a delete cgroup and pindef for the vcpu into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the add the vcpu to a cgroup into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Peter Krempa