Setup the chardev similarly to how we do it on startup so that virtlogd
is properly used with chardevs which are hotplugged to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When hotplugging a chardev we need the same form of setup for the
character device. Export a version which takes a 'virDomainDeviceDef'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
FD passing and TLS is normally setup via private data for the chardev
source. The monitor implementation didn't support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code uses fdsets for the pipe passed from virtlogd to qemu, but the
chardev hot-unplug code neglected to detach the fdset after the chardev
was removed. This kept the FDs open by qemu even after they were not
used any more.
After the refactor to use qemuFDPass for chardevs we now configure the
'opaque' field for fdsets used for chardevs so we can use
qemuHotplugRemoveFDSet to remove the unused fdset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the parts which already pass FDs via fdset or directly to use
the new infrastructure.
Apart from simpler code this also adds the appropriate names to the fds
in the fdsets which will allow us to properly remove the fdsets won
hot-unplug of chardevs, which we didn't do for now and resulted in
leaking the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefix the file descriptor name with the alias of the network device so
that it's similar to other upcoming use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For now we have only one code path ('vdpa' interface) which actually
cleans up the fdset after it's done, but there are more device types
using fdsets.
In order to unify the handling of fdsets the removal code will now be
able to remove fdsets based on a prefix of the 'opaque' field, which
we'll always prefix with a device alias or e.g. node name once fdsets
are also used for disk backing.
To keep compatibility with old QEMUs, retain the possibility for the
VDPA interface to use the path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code unplugging the fdset for a 'vdpa' network device can be later
reused. Extract it into 'qemuHotplugRemoveFDSet'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helpers for passing of the file descriptor needed for 'vdpa'
interfaces.
Apart from the simplification in this case it will allow further changes
to unify all fdset handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The existing helpers we have are very clumsy and there's no integration
with the monitor.
This patch introduces new helpers to bridge the gap and simplify handing
of fdsets and classic FD passing when generating commandline/hotplug
arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM we must assign unique IDs for fdsets we add via
'-add-fd'. For now it was done by using the index of the filedescriptor
passed to the virCommand. That approach is not very flexible, because
you need to have already passed the 'fd' to virCommand before generating
the fdset path, and also won't nicely work with fdsets containing two or
more fds.
This patch introduces a counter into the private data of a qemu domain
so that we can allocate unique ids without relying on virCommand.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the 'qemuMonitorRemoveFdset', it doesn't make sense
to store it as signed when only unsigned values are expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorRemoveFdset' validates that the 'fdset' argument isn't less
than 0. We can turn it to unsigned and thus avoid the error message
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Caller passes 'driver->securityManager', and 'priv->qemuCaps' as
arguments along with 'vm', but both aforementioned objects are
accessible directly from 'vm'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code paths which don't wish to use FD passing are supposed to not call
the function which sets up the chardev for FD passing.
This is ensured by calling it only in the host prepare step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a patch adding similarly named APIs I was asked to use 'ID' instead
of 'Id'. Since the code is being put together fix
qemuDomainStorageIdNew/Reset first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They're used only inside qemu_domain.c. Move it before their usage,
and unexport them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can exit early when the input is an empty string, and we can
avoid storing the string length in a variable since we only use
that information once.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hw.cpufrequency sysctl, which we use to obtain the CPU
frequency on macOS, is not available when running on Apple
Silicon, and as a consequence we currently report an error
whenever such information is requested.
The virNodeInfo.mhz field, where the CPU frequency gets stored,
is documented as being zero when the information could not be
obtained, and we already do that for Linux on aarch64. Extend
this behavior to macOS on Apple Silicon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the mutex is part of the `driver` object, it cannot guard that
object's creation and destruction perfectly.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers currently guarantee flags passed to virDomainObjGetMessages
are either zero or contain at least one of the supported flags. But it
doesn't mean we should not check for the possibility an unknown flag was
the only one passed to virDomainObjGetMessages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If 1024 was not enough to fit the DN, gnutls_x509_crt_get_dn would store
the required size in subjectlen. And since we're not checking the return
value of this function, we would happily overwrite some random memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We use 'ret' for storing values to be returned from a function. Return
values from called functions that are not supposed to be returned
further are usually called 'rv' (or 'rc').
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few places where a virPCIDeviceAddress typed variable
is allocated on the stack but it's not initialized. This can lead
to random values of its members which in turn can lead to a
random behaviour.
Generated with help of the following spatch:
@@
identifier I;
@@
- virPCIDeviceAddress I;
+ virPCIDeviceAddress I = { 0 };
And then fixing bhyveAssignDevicePCISlots() which does declare
the variable and then explicitly zero it by calling memset() only
to set a specific member afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After previous commits, the cleanup label shrank to plain
'return' statement. There's no point in having such label, so
drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Nothing inside the qemuPrepareNVRAM function relies on @srcFD
being closed early and nothing closes it early. It's okay then to
close it automatically when leaving the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After previous commits there is no need for qemuPrepareNVRAM() to
open code virFileRewrite(). Deduplicate the code by calling the
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When rewriting a file using virFileRewrite() and error occurs
while writing into a temporary file it's actually the callback
that can report the most accurate error. Move error reporting
into very few callback we have currently. Those callbacks are
trivial so the benefit of this change is not obvious, but this
will change shortly when slightly more complicated callback is
introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, due to the way virFileRewrite() works, the rewritten
file is owned by user and group that the daemon runs under. So
far, this is not a problem, because the function is used to write
XML files or secrets for persistent objects (domains, networks,
etc.) and we don't need other users to read/write those files.
But shortly, this function is going to be used for creating files
for QEMU domains. There we want the QEMU process (i.e. different
user) to read the file.
Therefore, introduce two new arguments: @uid and @gid that allow
setting desired owner of the file. Pass -1 to preserve current
behaviour (i.e. create the file owned by the user running the
daemon).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even though the CH driver doesn't implement virNetworkUpdate()
API, when it does it will see the arguments in correct order.
This is similar to other drivers that don't implement the API,
like ESX, libxl, LXC, etc. Enabling this driver feature stops
clients from swapping the arguments (see comment in the API for
more info).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
No functional change intended. This change makes the refactoring to
automatic mutex management easier to follow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
No functional change intended. This change makes the recfatoring to
automatic mutex management easier to follow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two places where a domain can be started in CH driver:
chDomainCreateXML() and chDomainCreateWithFlags(). Both acquire a
job (good), but neither of them checks whether the domain isn't
already running. This is wrong. Fortunately, both function call
the very same virCHProcessStart() rendering it the best place for
such check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are few places where a call to virDomainObjListRemove() is
guarded with !vm->persistent check. And there are some places
which are missing this check completely (leading us to losing a
domain). To prevent such mistakes introduce
virCHDomainRemoveInactive() which does the check for us. Also
replace all occurrences of virDomainObjListRemove() with the call
to the new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
When creating a domain failed, then the virCHDomainObjEndJob()
would be jumped over. Fix this by creating enjob label and fixing
one goto.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Inside chDomainCreateXML(), towards the end, the driver is
unlocked even though there is no corresponding driver lock call
before that. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There is no need to lock whole driver when accessing
virDomainObjList. Those APIs were specifically tailored to be
thread safe (when we were dropping QEMU driver lock). Don't
resurrect old history.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In chConnectGetVersion() the CH driver is locked in order to read
driver->version. This is needless, because not only is the
version set with driver unlocked (chStateInitialize() calls
chExtractVersion() which sets the version), but the version is
practically immutable. Once driver initialized itself it's never
changed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
If VIR_QEMU_PROCESS_START_RESET_NVRAM flag is passed when
starting a domain, then user requested to overwrite the domain
specific NVRAM with the one from template. But it is very likely
that the path to the template is not stored in the domain
definition, which in turn makes the copy function
(qemuPrepareNVRAM()) fail.
The solution is simple - when preparing domain, specifically when
deciding whether the path to the template should be autofilled,
ignore any existing NVRAM file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In one of my previous commits I've fixed the value of
VIR_QEMU_PROCESS_START_RESET_NVRAM flag (which was masking
another value). But what I forgot to do is update virCheckFlags()
calls in two places where the flag is passed: qemuProcessLaunch()
and qemuProcessStart().
Fixes: 1b636593c7
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use VIR_AUTOFREE for the temp socket so that the 'error:' label can be
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We try to update vlan tag by running virsh update-device command,
libvirtd will report ovs-vsctl arguments error. Vlan tag update
funtion does't consider the xml with no vlan configured circumstances.
The steps to reproduce the problem:
1 define and start domain with its vlan configured as:
<interface type='bridge'>
<mac address='52:54:00:9e:bb:ac'/>
<source bridge='ovs-br0'/>
<vlan>
<tag id='10'/>
</vlan>
<virtualport type='openvswitch'>
</virtualport>
<target dev='vnet4.0'/>
<model type='virtio'/>
<driver name='vhost'/>
</interface>
2 define and run virsh update-device command with no vlan configured as:
<interface type='bridge'>
<mac address='52:54:00:9e:bb:ac'/>
<source bridge='ovs-br0'/>
<virtualport type='openvswitch'>
</virtualport>
<target dev='vnet4.0'/>
<model type='virtio'/>
<driver name='vhost'/>
</interface>
#virsh update-device dom-id novlan.xml
3 virsh command returned error, and we got an error in libvirtd.log:
error : virCommandWait:2584 : internal error: exit status 1: ovs-vsctl: 'set' command requires at least 3 arguments
. Child process (ovs-vsctl --timeout=5 -- --if-exists clear Port vnet4.0 tag -- --if-exists clear Port vnet4.0 trunk
-- --if-exists clear Port vnet4.0 vlan_mode -- --if-exists set Port vnet4.0) unexpected
error : virNetDevOpenvswitchUpdateVlan:540 : internal error: Unable to set vlan configuration on port vnet4.0
Signed-off-by: Tu Qiang <tu.qiang35@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Older kernels did not support this sysctl, but they did not restrict
userfaultfd in any way so everything worked as if
vm.unprivileged_userfaultfd was set to 1. Thus we can safely ignore
errors when setting the value.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuPrepareNVRAM() function accepts three arguments and the
last one being a boolean type. However, when the function is
called from qemuProcessPrepareHost() the argument passed is a
result of logical and of @flags (unsigned int) and
VIR_QEMU_PROCESS_START_RESET_NVRAM value. In theory this is
unsafe to do because if the value of the flag is ever changed
then this expression might overflow. Do what we do elsewhere:
double negation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In one of recent commits qemuProcessStartFlags enum gained new
value: VIR_QEMU_PROCESS_START_RESET_NVRAM but due to a typo it
has the same value as another member of the enum. Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While VNC ports auto-allocated by the libxl driver are released in
libxlDomainCleanup, spice ports are overlooked. Rework the existing
logic to release any auto-allocated graphics ports, not just the VNC
port of the first graphics device.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the <loader> had an explicit readonly='no' attribute we
accidentally still marked the plfash as readonly due to the
bad conversion from virTristateBool to bool. This was missed
because the test cases run with no capabilities set and thus
are validated the -drive approach for pflash configuration,
not the -blockdev approach.
This affected the following config:
<os>
<loader readonly='no' type='pflash'>/var/lib/libvirt/qemu/nvram/test-bios.fd</loader>
</os>
for the sake of completeness, we also add a test XML config
with no readonly attribute at all, to demonstrate that the
default for pflash is intended to be r/w.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We can now replace the existing NVRAM file on startup when
the API requests this.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a guest with pflash based firmware, we will initialize
NVRAM from a template if it does not already exist. In theory if the
firmware code file is updated, the existing NVRAM variables should
continue to work correctly. It is inevitable that this could break
accidentally one day. Or a bug in the firmware might corrupt the
NVRAM storage. Or user might make bad changes to the settings that
prevent booting. Or the user might have re-configured the XML to
point to a different firmware file incompatible with the current
variables.
In all these cases it would be useful to delete the existing NVRAM
and initialize it from the pristine template.
To support this introduce a VIR_DOMAIN_START_RESET_NVRAM constant
for use with virDomainCreate / virDomainCreateXML, along with
VIR_DOMAIN_SAVE_RESET_NVRAM for use with virDomainRestore and
VIR_DOMAIN_SNAPSHOT_REVERT_RESET_NVRAM for use with
virDomainSnapshotRevert.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we crash part way through writing the NVRAM file we end up with an
unusable NVRAM on file. To avoid this we need to write to a temporary
file and fsync(2) at the end, then rename to the real NVRAM file path.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In one of my previous commits, I've changed an XPath in
virCPUDefParseXML() from "boolean(./counter...)" to
"./counter...)". Notice the dangling closing bracket? Well, I
didn't back then.
Fixes: 0fe2d8dd33
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two places where a variable passed to VBOX_RELEASE()
macro is set to NULL explicitly. There is no need for that
because the macro sets the variable to NULL already.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libxl driver reconnects to all running VMs when libvirtd is restarted,
but it failed to mark auto-allocated graphics ports as set in the port
allocator. If many VMs are running that use port auto-allocation and
libvirtd is restarted, the port allocator is likely to hand out a port
already in use when a new VM is created that uses auto-allocation. VM
creation will fail due to the port clash.
When reconnecting to running VMs after a libvirtd restart, let the port
allocator know about previously allocated ports.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify 'qemuProcessGetVCPUQOMPath' to take the detected QOM path of the
first vCPU which is always present as the QOM path used our code probing
CPU flags via 'qom-get'.
This is needed as upcoming qemu will change it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/272
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2051451
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit we need to probe the vcpus first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming changes will require that we have a proper QOM path for cpus
when querying the flags as qemu is going to change it.
By moving the flag probing code later we'll already probe the QOM paths
so no re-query will be needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QOM path will be needed by code which is querying the cpu flags via
'qom-get' and thus needs a valid QOM path to the vCPU.
Add it into the private data and transfer from the queried data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all code using the 'QOM_CPU_PATH' macro to accept the QOM path
as an argument.
For now the new helper for fetching the path 'qemuProcessGetVCPUQOMPath'
will always return the same hard-coded value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing and remove the 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is used only as a helper in src/qemu/qemu_monitor_json.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This directory contains runtime state, not persistent state.
The latter goes into swtpmStorageDir.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When looping over TPM devices for a domain, we can avoid calling
this function for each iteration and call it once per domain
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Using the word "create" can give users the impression that disk
operations will be performed, when in reality all these functions
do is string formatting.
Follow the naming convention established by virBuildPath(),
virFileBuildPath() and virPidFileBuildPath().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This leaves qemuExtTPMCleanupHost() to only deal with looping
over TPM devices, same as other qemuExtTPMDoThing() functions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This leaves qemuExtTPMSetupCgroup() to only deal with looping
over TPM devices, same as other qemuExtTPMDoThing() functions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Other functions that operate on a single TPM emulator follow
the qemuTPMEmulatorDoThing() naming convention.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
As the parent address is part of the mdev nodedev name lets expose the
internally available parent address in the XML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we are about to spawn QEMU, we validate the domain
definition against qemuCaps. Except when domain is/was already
running before (i.e. on incoming migration, snapshots, resume
from a file). However, especially on incoming migration it may
happen that the destination QEMU is different to the source
QEMU, e.g. the destination QEMU may have some devices disabled.
And we have a function that validates devices/features requested
in domain XML against the desired QEMU capabilities (aka
qemuCaps) - it's virDomainDefValidate() which calls
qemuValidateDomainDef() and qemuValidateDomainDeviceDef()
subsequently.
But the problem here is that the validation function is
explicitly skipped over in specific scenarios (like incoming
migration, restore from a snapshot or previously saved file).
This in turn means that we may spawn QEMU and request
device/features it doesn't support. When that happens QEMU fails
to load migration stream:
qemu-kvm: ... 'virtio-mem-pci' is not a valid device model name
(NB, while the example shows one particular device, the problem
is paramount)
This problem is easier to run into since we are slowly moving
validation from qemu_command.c into said validation functions.
The solution is simple: do the validation in all cases. And while
it may happen that users would be unable to migrate/restore a
guest due to a bug in our validator, spawning QEMU without
validation is worse (especially when you consider that users can
supply their own XMLs for migrate/restore operations - these were
never validated).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2048435
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The binary validation in virPidFileReadPathIfAlive may fail with EACCES
if the calling process does not have CAP_SYS_PTRACE capability.
Therefore instead do only the check that the pidfile is locked by the
correct process.
Fixes the same issue as with swtpm.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Access to /proc/[pid]/exe may be restricted in certain environments (e.g.
in containers) and any attempt to stat(2) or readlink(2) the file will
result in 'permission denied' error if the calling process does not have
CAP_SYS_PTRACE capability. According to proc(5) manpage:
Permission to dereference or read (readlink(2)) this symbolic link is
governed by a ptrace access mode PTRACE_MODE_READ_FSCREDS check; see
ptrace(2).
The binary validation in virPidFileReadPathIfAlive may fail with EACCES.
Therefore instead do only the check that the pidfile is locked by the
correct process. To ensure this is always the case the daemonization and
pidfile handling of the swtpm command is now controlled by libvirt.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function will attempt to read a pid from @path, and store it in
@pid. The @pid will only be set, however, if @path is locked by
virFileLock() at byte 0 and the pid in @path is running.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @unique argument didn't exist even when the function was
introduced in a042275a39, and the @vm argument was not renamed
when the function was changed to take a virDomainDef* instead of
a virDomainObj* in 7ed6934f3b.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
SmartNIC DPUs may not expose some privileged eswitch operations
to the hypervisor hosts. For example, this happens with Bluefield
devices running in the ECPF (default) mode for security reasons. While
VF MAC address programming is possible via an RTM_SETLINK operation,
trying to set a VLAN ID in the same operation will fail with EPERM.
The equivalent ip link commands below provide an illustration:
1. This works:
sudo ip link set enp130s0f0 vf 2 mac de:ad:be:ef:ca:fe
2. Setting (or clearing) a VLAN fails with EPERM:
sudo ip link set enp130s0f0 vf 2 vlan 0
RTNETLINK answers: Operation not permitted
3. This is what Libvirt attempts to do today (when trying to clear a
VF VLAN at the same time as programming a VF MAC).
sudo ip link set enp130s0f0 vf 2 vlan 0 mac de:ad:be:ef:ca:fe
RTNETLINK answers: Operation not permitted
If setting an explicit VLAN ID results in an EPERM, clearing a VLAN
(setting a VLAN ID to 0) can be handled gracefully by ignoring the
EPERM error with the rationale being that if we cannot set this state
in the first place, we cannot clear it either.
In order to keep explicit clearing of VLAN ID working as it used to
be passing a NULL pointer for VLAN ID is used.
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa