In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Turn various vshPrint() informative messages into vshPrintExtra(), so
they are not printed when requesting the quiet mode; neither XML/info
outputs nor the results of commands are affected.
Also change the expected outputs of the virsh-undefine test, since virsh
is invoked in quiet mode there.
Some informative messages might still be converted (and thus silenced
when in quiet mode), but this is an improvements nonetheless.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358179
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "interface",' entries are replaced, just those that have the
common .help string of "interface name or MAC address".
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.
We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.
vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 0766783abb
Coverity complains that the EDIT_FREE definition results in DEADCODE.
As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...
Prior code to above commitid would :
vir*Ptr foo = NULL;
...
foo = vir*GetXMLDesc()
...
vir*Free(foo);
foo = vir*DefineXML()
...
And thus the free was needed. With the change to use EDIT_FREE the
same code changed to:
vir*Ptr foo = NULL;
vir*Ptr foo_edited = NULL;
...
foo = vir*GetXMLDesc()
...
if (foo_edited)
vir*Free(foo_edited);
foo_edited = vir*DefineXML()
...
However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set
All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Before:
$ virsh iface-list
Name State MAC Address
--------------------------------------------
br0 active f0🇩🇪f1:dc:b8:b0
virbr2 active 52:54:00:61:78:0c
After:
$ virsh iface-list
Name State MAC Address
---------------------------------------------------
br0 active f0🇩🇪f1:dc:b8:b0
virbr2 active 52:54:00:61:78:0c
virsh secret-list leak when no secrets are defined:
==27== 8 bytes in 1 blocks are definitely lost in loss record 6 of 726
==27== by 0x4E941DD: virAllocN (viralloc.c:183)
==27== by 0x5037F1A: remoteConnectListAllSecrets (remote_driver.c:3076)
==27== by 0x5004EC6: virConnectListAllSecrets (libvirt.c:16298)
==27== by 0x15F813: vshSecretListCollect (virsh-secret.c:397)
==27== by 0x15F0E1: cmdSecretList (virsh-secret.c:532)
And so do some other *-list commands.
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
Recent changes uncovered FORWARD_NULL and NEGATIVE_RETURNS problems with
the processing of the 'nActiveIfaces' and 'nInactiveIfaces' and their
associated allocated arrays in 'vshInterfaceListCollect' due to the
possibility of returning -1 in a call and using the return value as a
for loop index end condition.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
tools/virsh-interface.c:
* vshInterfaceSorter to sort interfaces by name
* vshInterfaceListFree to free the interface objects list.
* vshInterfaceListCollect to collect the interface objects, trying
to use new API first, fall back to older APIs if it's not supported.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
Another relatively easy split, since helper functions were fixed
in the previous patch.
* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.
* virsh.c: Remove interface commands and a few helpers.
(vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
Michal Privoznik