The argument will be used for testing the command/option completer
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the 'complete' command is meant to be hidden and used only for
the completion script, there's nothing preventing it being used in all
virsh modes.
This poses a problem as the command tries to close 'stdin' to avoid the
possibility that an auth callback would want to read the password.
In interactive mode this immediately terminates virsh and in
non-interactive mode it attempts to close it multiple times if you use
virsh in batch mode.
Fix the issues by using virOnce() to close it exactly once and do so
only in non-interactive mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Shorten the function name as there isn't any vshCommandOptString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'vshReadlineInit' is called when interactive virsh is started but also
on each call to 'cmdComplete'. Calling it repeatedly (using the
'complete' command interactively, or multiple times in batch mode) leaks
the buffers for history file configuration.
Avoid multiple setups of this function by returning success in case the
history file config is already present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The buffer which we assign to the 'rl_line_buffer' variable of readline
would be overwritten and thus leaked on multiple invocations of
cmdComplete in one session.
Free/clear it after it's used.
Hitting this leak was until recenly possible only in non-interactive
batch mode and recently also in interactive mode as 'complete' can be
used multiple times now interactively.
Fixes: a0e1ada63c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The "quantum" attribute of HTB is documented as:
Number of bytes to serve from this class before the scheduler
moves to the next class.
Since v1.3.2-rc1~225 we compute what we think is the appropriate
value and pass it on the TC command line. But kernel and
subsequently TC use uint32_t to store this value. If we compute
value outside of this type then TC fails and prints usage which
we then interpret as an error message. Needlessly long error
message. While there's not much we can do about the latter, we
can put a cap on the value and stop tickling this behavior of TC.
Fixes: 065054daa7
Resolves: https://issues.redhat.com/browse/RHEL-34112
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit v10.0.0-265-ge67bca23e4 added a `active_config` and
`defined_config` to nodedev mdev internal XML handling.
`defined_config` can be filled at XML parse time, but `active_config`
must be filled in by nodedev driver. This wasn't implemented for the
test driver however, which caused virt-manager test suite regressions.
Working example:
```
$ virsh --connect test:///home/crobinso/src/virt-manager/tests/data/testdriver/testdriver.xml nodedev-dumpxml mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110
<device>
<name>mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110</name>
<path>/sys/devices/css0/0.0.0023/8e37ee90-2b51-45e3-9b25-bf8283c03110</path>
<parent>css_0_0_0023</parent>
<capability type='mdev'>
<type id='vfio_ccw-io'/>
<iommuGroup number='0'/>
</capability>
</device>
```
Broken example:
```
$ virsh --connect test:///home/crobinso/src/virt-manager/tests/data/testdriver/testdriver.xml nodedev-dumpxml mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110
<device>
<name>mdev_8e37ee90_2b51_45e3_9b25_bf8283c03110</name>
<path>/sys/devices/css0/0.0.0023/8e37ee90-2b51-45e3-9b25-bf8283c03110</path>
<parent>css_0_0_0023</parent>
<capability type='mdev'>
<iommuGroup number='0'/>
</capability>
</device>
```
There's already code that does what we want in the test suite.
Move it to a shared function, and call it in test driver when
creating a nodedev from driver startup XML.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Error if INACTIVE requested for transient object
- Force dumping INACTIVE XML when object is inactive
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was the implied default before nodedevs gained a notion of
being inactive and transient. It also matches the implied default
when parsing other object types
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rework 'virDomainUSBDeviceDefForeach' to use virDomainDeviceInfoIterate
instead of open-coding all iterators. To achieve this
'virDomainDeviceIsUSB' needs to be fixed as it didn't properly handle
'sound', 'fs', 'chr', 'ccid', and 'net' usb devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Since libvirt now tries to interpret network device models (unless an
unknow model is used) the documentation didn't make a good job
specifying what is supported.
Rewrite the docs to explicitly list the models which we do parse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
qemu-9.0 was released so update the capability dump to the final
version.
Notable changes:
- the 'vdpa' simulator support was reverted for now
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Prior to commit eac646ea49 VIR_TEST_MOCK included the path to the
build directory, but the code was not fixed after VIR_TEST_MOCK was
changed resulting in the following failure when attempting to probe
capaibilities:
$ ./tests/qemucapsprobe /path/to/qemu/qemu-system-x86_64 > out
libqemucapsprobemock.so: No such file or directory
Fix the construction of the path to the mock library by concatenating it
back with the absolute path to the build directory.
Fixes: eac646ea49
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While QEMU accepts and interprets an empty string in the tls-hostname
field in migration parametes as if it's unset, the same does not apply
for the 'tls-hostname' field when 'blockdev-add'-ing a NBD backend for
non-shared storage migration.
When libvirt sets up migation with TLS in 'qemuMigrationParamsEnableTLS'
the QEMU_MIGRATION_PARAM_TLS_HOSTNAME migration parameter will be set to
empty string in case when the 'hostname' argument is passed as NULL.
Later on when setting up the NBD connections for non-shared storage
migration 'qemuMigrationParamsGetTLSHostname', which fetches the value
of the aforementioned TLS parameter.
This bug was mostly latent until recently as libvirt used
MIGRATION_DEST_CONNECT_HOST mode in most cases which required the
hostname to be passed, thus the parameter was set properly.
This changed with 8d693d79c4 for post-copy migration, where libvirt now
instructs qemu to connect and thus passes NULL hostname to
qemuMigrationParamsEnableTLS, which in turn causes libvirt to try to
add NBD connection with empty string as tls-hostname resulting in:
error: internal error: unable to execute QEMU command 'blockdev-add': Certificate does not match the hostname
To address this modify 'qemuMigrationParamsGetTLSHostname' to undo the
weird semantics the migration code uses to handle TLS hostname and make
it return NULL if the hostname is an empty string.
Fixes: e8fa09d66b
Resolves: https://issues.redhat.com/browse/RHEL-32880
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since OVS keeps desired state in a DB, upon sudden crash of the
host we may leave a port behind. There's no problem on VM
shutdown or NIC hotunplug as we call corresponding del-port
function (virNetDevOpenvswitchRemovePort()). But if the host
suddenly crashes we won't ever do that. What happens next, is
when OVS starts it finds desired state in its DB and creates a
stale port.
OVS added support for transient ports in v2.5.0 (Feb 2016) and
since its v2.9.0 it even installs a systemd service
(ovs-delete-transient-ports) that automatically deletes transient
ports on system startup. If we mark a port as transient then OVS
won't restore its state on restart after crash.
This change may render "--may-exist" argument redundant, but I'm
not sure about all the implications if it was removed. Let's keep
it for now.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/615
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The CCW variant of the 'vhost-user-fs' device in qemu doesn't
deliberately support the 'bootindex' attribute as the machine is unable
to boot from such device.
Reject '<boot order' on non-PCI virtiofs, add tests validating that it's
rejected as well as that virtiofs on PCI-based hosts but without address
specified will be accepted.
Resolves: https://issues.redhat.com/browse/RHEL-22728
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Replace symlink by a real output file so that we can also test updates
to input file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Pretty straightforward. Just put mem-reserve attribute whenever
it's set. Previous commit ensures it's set only for valid
controller models.
Resolves: https://issues.redhat.com/browse/RHEL-7461
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only two controller models allow setting mem-reserve:
pcie-root-port and pci-bridge. Reflect this fact during
validation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are PCI devices with pretty large non-prefetchable memory,
for instance:
Memory at 9d800000 (64-bit, non-prefetchable) [size=8M]
Memory at a6800000 (64-bit, non-prefetchable) [size=16K]
For cold plugged devices this is not a problem, because firmware
sets PCI controllers in a way that make devices behind them just
work. Problem arises if such PCI device is to be hot plugged.
Since the PCI device wasn't present at cold boot, firmware could
not take it into calculations and the amount of reserved memory
is not sufficient.
Introduce a know that allows users overriding value computed by
FW and thus allow hot plug of such PCI devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The purpose of ERROR() macro in our NSS module is to print error
message provided as arguments followed by error string
corresponding to errno. Historically, we've used strerror_r() for
that (please note, we want our NSS module to be free of libvirt
internal functions, or glib even - hence, g_strerror() is off the
table).
Now strerror_r() is documented as:
Returns ... a pointer to a string that the function stores in
buf, or a pointer to some (immutable) static string (in which
case buf is unused).
Therefore, we can't rely the string being stored in the buf and
really need to store the retval and print that instead.
While touching this area, decrease the ebuf size, since its
current size (1KiB) is triggering our stack limit (2KiB) in some
cases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Ages ago origCPU in domain private data was introduced to provide
backward compatibility when migrating to an old libvirt, which did not
support fetching updated CPU definition from QEMU. Thus origCPU will
contain the original CPU definition before such update. But only if the
update actually changed anything. Let's always fill origCPU with the
original definition when starting a domain so that we can rely on it
being always set, even if it matches the updated definition.
This fixes migration or save operations with custom domain XML after
commit v10.1.0-88-g14d3517410, which expected origCPU to be always set
to the CPU definition from inactive XML to check features explicitly
requested by a user.
https://issues.redhat.com/browse/RHEL-30622
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
$ virsh --connect test:///default nodedev-list
error: Failed to list node devices
error: unsupported flags (0x80000000) in function testConnectListAllNodeDevices
The test driver handles the nodedev state flags, we just need to
allow them
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The typed parameter array length must be non-NULL and either 0, or a
positive number.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only thing we need to free in the cleanup code is virCPUDef and for
that we already have g_autoptr handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virt-aa-helper bash script constructs a path to itself when
it runs. But it isn't prepared for the case when there is a space
in the path leading to the script (something, something, double
quotes, something).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If path to the build directory contains spaces (e.g. meson setup
'a b') then our mocks don't work. The problem is in glibc where
not just a colon but also a space character is a delimiter for
LD_PRELOAD [1]. Hence, a test using mock tries to preload
something like libvirt.git/a b/libsomethingmock.so which is
interpreted by glibc as two separate strings: "libvirt.git/a",
"b/libsomethingmock.so".
One trick to get around this is to set LD_PRELOAD to just the
shared object file (without path) and let glibc find the mock in
paths specified in LD_LIBRARY_PATH (where only a colon or a
semicolon are valid separators [1]). This can be seen in action
by running say:
LD_DEBUG=libs ./virpcitest
1: https://man7.org/linux/man-pages/man8/ld.so.8.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of my recent commits I've chopped just too much and moved
a variable declaration into a function not realizing it's still
used on FreeBSD. Bring it back but only for the FreeBSD case.
Fixes: f8b5bd855f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
clang on Fedora started to complain about some calls to g_new0()
we're making in vbox_snapshot_conf.c. Specifically, we're passing
zero as number of elements to allocate. And while usually SA
tools are not clever, in this specific case clang is right.
There are three cases where such call is made, but all of them
later use VIR_EXPAND_N() to allocate more memory (if needed). But
VIR_EXPAND_N() accepts a variable set to NULL happily.
Therefore, just drop those three calls to g_new0(..., 0) and let
VIR_EXPAND_N() allocate memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In QEMU and LXC drivers in a few places only
virNetDevBandwidthClear() is called. This means that if an
interface is of openvswitch vport profile, its QoS is not
removed. And to make matters worse - OVS is designed to remember
state even when corresponding interface is gone. This leads to
stale QoS settings piling up in OVS database.
To resolve this, introduce virDomainInterfaceClearQoS() which
looks at given interface and calls corresponding QoS clear
function. Then, basically replace virNetDevBandwidthClear() calls
in those hypervisor drivers with this new function.
Resolves: https://issues.redhat.com/browse/RHEL-30373
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The reason virDomainClearNetBandwidth() exists in src/conf/ is
that at the time its introduction we did not have a better place.
But now we do. Firstly, virDomainClearNetBandwidth() is
hypervisor agnostic code, but really has nothing to do with
domain configuration (it doesn't parse/format XML). Secondly, in
near future it'll call another function from src/hypervisor/ and
that's not really allowed from src/conf/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The @brname argument of virNetDevOpenvswitchRemovePort() is and
was unused ever since its introduction in v0.9.11-rc1~257. Just
remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Both LXC and QEMU drivers have the same code to remove vport when
removing a domain's interface. Instead of repeating the same
pattern in both drivers, move the code into hypervisor agnostic
location (src/hypervisor/) and switch to calling this new
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The comment to virNetDevOpenvswitchInterfaceGetMaster() contains
wrong function name. Fix this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Peter Krempa