This annotation being missing resulted in virtlogd and virtlockd
being marked as "indirect" services, i.e. services that cannot
be started directly but have to be socket activated instead.
While this is our preferred configuration, we shouldn't prevent
the admin to start them at boot if they want to.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirtd, virtlog and virtlockd are enabled, we want their
admin sockets to be enabled for socket activation as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Commit 93af79fb removed a cleanup label in favor of returning error
values directly in certain cases. But the final return value was changed
from -1 to 0. If we get to the end of the function, that means that
we've waited for the process to exit but it still exists. So we should
return -1. The error message was still being set correctly, but we were
returning a success status (0).
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a modular daemon configuration, virtxend does not support the
virNetwork* APIs. It should open a connection to virtnetworkd when
using those APIs, but currently always opens a connection to
"xen:///system". Switch to using virGetConnectNetwork to obtain a
valid connection instead of using the hardcoded URI.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewing the code I found that return value of function
udev_device_get_sysattr_value() is dereferenced without a check.
udev_device_get_sysattr_value() may return NULL by number of reasons.
v2: VIR_DEBUG added, replaced STREQ(NULLSTR()) with STREQ_NULLABLE()
v3: More checks added, to skip earlier. More verbose VIR_DEBUG.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virDomainMemoryDefValidate() there's a check that
address where a virtio-mem memory device is mapped to is a
multiple of its block size. But this check is off by a couple of
bits, because the memory address is in bytes while the block size
is in kibibytes. Therefore, when checking whether address is a
multiple of the block size, the latter has to be multiplied by a
factor of 1024.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU mandates the VIRTIO_PMEM address is aligned to a pagesize.
This is a very reasonable requirement. So much so, that it
deserves to be in hypervisor agnostic validation code
(virDomainMemoryDefValidate()). Not that any other hypervisor
would support VIRTIO_PMEM yet. But even if they did, this would
surely be still valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current message can be misleading, because it seems to suggest
that no firmware of the requested type is available on the system.
What actually happens most of the time, however, is that despite
having multiple firmwares of the right type to choose from, none
of them is suitable because of lacking some specific feature or
being incompatible with some setting that the user has explicitly
enabled.
Providing an error message that describes exactly the problem is
not feasible, since we would have to list each candidate along
with the reason why we rejected it, which would get out of hand
quickly.
As a small but hopefully helpful improvement over the current
situation, reword the error message to make it clearer that the
culprit is not necessarily the firmware type, but rather the
overall domain configuration.
Suggested-by: Michael Kjörling <7d1340278307@ewoof.net>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our test driver lacks implementation for
virConnectGetDomainCapabilities(). Provide one, though a trivial
one. Mostly so that something else than VIR_ERR_NO_SUPPORT error
is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As can be seen from previous commits, it's fairly easy to pass a
different type to virReportEnumRangeError() than the actual
variable is of. So far, we have a sizeof() hack to check if some
nonsensical types are not passed, e.g. it catches cases where a
function name is passed instead of an enum. Extend the hack to
check whether proper enum was passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @backend member of _virDomainVideoDef struct is of type
virDomainVideoBackendType. Pass the proper type to
virReportEnumRangeError().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The @virtPortOp variable inside of virNetDevVPortProfileOp8021Qbh
is of type virNetDevVPortProfileLinkOp. Pass the proper type to
virReportEnumRangeError().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This allows us to declare variables without using 'enum
virNetDev....' and will become more useful in the near future
(when virReportEnumRangeError() is fixed).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Function virGetConnectSecret() can return NULL so we need to check it
since in virSecretGetSecretString() it gets dereferenced.
Reported-by: coverity
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Require libnbd-devel when building the qemu driver, recommend nbdkit
packages.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's not possible to use password-protected ssh keys directly with
libvirt because libvirt doesn't have any way to prompt a user for the
password. To accomodate password-protected key files, an administrator
can add these keys to an ssh agent and then configure the domain with
the path to the ssh-agent socket.
Note that this requires an administrator or management app to
configure the ssh-agent with an appropriate socket path and add the
necessary keys to it. In addition, it does not currently work with
selinux enabled. The ssh-agent socket would need a label that libvirt
would be allowed to access rather than unconfined_t.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the ability to specify a path to a ssh-agent socket in order to use
the ssh-agent to authenticate to remote ssh disks. Example
configuration:
<disk type='network'>
</source protocol='ssh' ...>
<identity username='myusername' agentsock='/path/to/socket'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, we can support logging in with
an ssh key file. Pass the path to the configured key file and the
username to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Authenticating via key file to an ssh server is often preferable to
logging in via password. In order to support this functionality add a
new <identity> xml element for ssh disks that allows the user to specify
a keyfile and username. Example configuration:
<disk type='network'>
<source protocol='ssh' ...>
<identity keyfile='/path/to/id_rsa' username='myusername'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, use the configured value for
knownHosts and pass it to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to make ssh disks usable, we need to be able to validate a
remote host. To do this, add a <knownHosts> xml element for ssh disks to
allow the user to specify a location for a file that contains known host
keys. Implementation to follow.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Right now, ssh network disks are not usable. There is some basic support
in libvirt that is meant to support disk chains that have backing disks
located at ssh urls, but there is no real way for a user to configure a
ssh-based disk. This commit allows users to configure an ssh disk with
password authentication. Implementation will follow.
<disk type='network'>
<source protocol='ssh' ...>
<auth username='myusername'>
<secret type='iscsi' usage='secretname'/>
</auth>
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using nbdkit to serve a network disk source, the nbdkit process
will start and wait for an nbd connection before actually attempting to
connect to the (remote) disk location. Because of this, nbdkit will not
report an error until after qemu is launched and tries to read from the
disk. This results in a fairly user-unfriendly error saying that qemu
was unable to start because "Requested export not available".
Ideally we'd like to be able to tell the user *why* the export is not
available, but this sort of information is only available to nbdkit, not
qemu. It could be because the url was incorrect, or because of an
authentication failure, or one of many other possibilities.
To make this friendlier for users and easier to detect
misconfigurations, try to connect to nbdkit immediately after starting
nbdkit and before we try to start qemu. This requires adding a
dependency on libnbd. If an error occurs when connecting to nbdkit, read
back from the nbdkit error log and provide that information in the error
report from qemuNbdkitProcessStart().
User-visible change demonstrated below:
Previous error:
$ virsh start nbdkit-test
2023-01-18 19:47:45.778+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
error: Failed to start domain 'nbdkit-test'
error: internal error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
After this change:
$ virsh start nbdkit-test
2023-01-18 19:44:36.242+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso': nbdkit: curl[1]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
error: Failed to start domain 'nbdkit-test'
error: internal error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adds the ability to monitor the nbdkit process so that we can take
action in case the child exits unexpectedly.
When the nbdkit process exits, we pause the vm, restart nbdkit, and then
resume the vm. This allows the vm to continue working in the event of a
nbdkit failure.
Eventually we may want to generalize this functionality since we may
need something similar for e.g. qemu-storage-daemon, etc.
The process is monitored with the pidfd_open() syscall if it exists
(since linux 5.3). Otherwise it resorts to checking whether the process
is alive once a second. The one-second time period was chosen somewhat
arbitrarily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the restart handler will trigger at an arbitrary time (when the
nbdkit process crashes, for instance), it's difficult to provide
feedback to the user if the restart is unsuccessful. Rather than just
relying on a warning in the log, taint the domain so that there will be
a slightly more user-visible notification.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We were testing the arguments that were being passed to qemu when a disk
was being served by nbdkit, but the arguments used to start nbdkit
itself were not testable. This adds a test to ensure that we're invoking
nbdkit correctly for various disk source definitions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add a private function to peek at the list of send buffers in virCommand
so that it is testable
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For virStorageSource objects that contain an nbdkitProcess, start that
nbdkit process to serve that network drive and then pass the nbdkit
socket to qemu rather than sending the network url to qemu directly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than passing passwords and cookies (which could contain
passwords) to nbdkit via commandline arguments, use the alternate format
that nbdkit supports where we can specify a file descriptor which nbdkit
will read to get the password or cookies.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All users of virCommandSetSendBuffer() are using it to send sensitive
data to a child process. So, since these buffers contain sensitive
information, clear it with virSecureErase().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add xml to the private data for a disk source to represent the nbdkit
process so that the state can be re-created if the libvirt daemon is
restarted. Format:
<nbdkit>
<pidfile>/path/to/nbdkit.pid</pidfile>
<socketfile>/path/to/nbdkit.socket</socketfile>
</nbdkit>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This prepares encryption secrets and authentication secrets. When we add
nbdkit-backed network storage sources, we will not need to send
authentication secrets to qemu, since they will be sent to nbdkit
instead. So split this into two different functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add new DO_TEST_CAPS_LATEST_NBDKIT macro to test xml2argv for various
nbdkit capability scenarios.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
log stderr and stdout from nbdkit into its own log so that
nbdkit-related issues can be debugged more easily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code can be used by the nbdkit implementation for reading back
filtered log data for error reporting. Move it to qemuLogContext so that
it can be shared. Renamed to qemuLogContextReadFiltered().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow us to use it for nbdkit logging in upcoming commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow to specify a basename for the log file so that
qemuDomainLogContextNew() can be used to create log contexts for
secondary loggers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add some helper functions to build a virCommand object and run the
nbdkit process for a given virStorageSource.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than hard-coding the nbdkit module directory, query the nbdkit
binary for the location to these directories. nbdkit provides a
--dump-config optiont that outputs this information and can be easily
parsed. We can also get the version from this output rather than
executing `nbdkit --version` separately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An object for storing information about a nbdkit process that is serving
a specific virStorageSource. At the moment, this information is just
stored in the private data of virStorageSource and not used at all.
Future commits will use this data to actually start a nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the virFileCache implementation for nbdkit capabilities to the qemu
driver. This allows us to determine whether nbdkit is installed and
which plugins are supported. it also has persistent caching and the
capabilities are re-queried whenever something changes.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Andrea Bolognani