The path to the pty of a Xen PV console is set only in
virDomainOpenConsole. But this is done too late. A call to
virDomainGetXMLDesc done before OpenConsole will not have the path to
the pty, but a call after OpenConsole will.
e.g. of the current issue.
Starting a domain with '<console type="pty"/>'
Then:
virDomainGetXMLDesc():
<devices>
<console type='pty'>
<target type='xen' port='0'/>
</console>
</devices>
virDomainOpenConsole()
virDomainGetXMLDesc():
<devices>
<console type='pty' tty='/dev/pts/30'>
<source path='/dev/pts/30'/>
<target type='xen' port='0'/>
</console>
</devices>
The patch intend to have the TTY path on the first call of GetXMLDesc.
This is done by setting up the path at domain start up instead of in
OpenConsole.
https://bugzilla.redhat.com/show_bug.cgi?id=1170743
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
It's possible to create a container with existing
disk image as root filesystem. You need to remove
existing disks from PCS VM config and then add a new
one, pointing to your image. And then call PrlVm_RegEx
with PRNVM_PRESERVE_DISK flag.
With this patch you can create such container with
something like this for new domain XML config:
<filesystem type='file' accessmode='passthrough'>
<driver type='ploop' format='ploop'/>
<source file='/path-to-image'/>
<target dir='/'/>
</filesystem>
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Handle information about filesystems in domain config
and add corresponding devices to container via
parallels sdk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
PCS removes disk image from filesystem, if you remove it
from config. There is a special flag PVCF_DETACH_HDD_BUNDLE
which allow to remove disk only from VM/CT config.
If you call virDomainDefine and remove some disk from
config it should be preserved, so call PrlVm_CommitEx
always with flag PVCF_DETACH_HDD_BUNDLE.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about container's filesystems and
store it in virDomainDef structure.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.
It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Commit id 'ca481a6f' added virNetworkRouteDefFree which may be called
in an error path from lxcAddNetworkRouteDefinition with 'route = NULL'.
So just add the (!def) at the top to resolve.
The 'virsh edit' command gets XML validation enabled by default,
with a --skip-validate option to disable it. The 'virsh define'
and 'virsh create' commands get a --validate option to enable
it, to avoid regressions for existing scripts.
The quality of error reporting from libxml2 varies depending
on the type of XML error made. Sometimes it is quite clear
and useful, other times it is obscure & inaccurate. At least
the user will see an error now, rather than having their
XML modification silently disappear.
We tested for positive return value from virDomainMaybeAddController,
but it returns 0 or -1 only resulting in a dead code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case we find out, there are more PCI devices to be connected
than there are available slots on the default PCI bus, we automatically add a
new bus and a related PCI bridge controller as well. As there are no free slots
left on the default PCI bus, PCI bridge controller gets a free slot on a
newly created PCI bus which causes qemu to refuse to start the guest.
This fix introduces a new function qemuDomainPCIBusFullyReserved which
is checked right before we possibly try to reserve a slot for PCI bridge
controller.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132900
Commit id 'aa2cc721' added calls to virSocketAddrFormat but did not
check for a NULL (error) return which could lead to bad output
in the XML file. Need to check for NULL return and cause failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Moving code for parsing and formatting network routes to
networkcommon_conf helps reusing those routes for domains. The route
definition has been hidden to help reducing the number of unnecessary
checks in the format function.
https://bugzilla.redhat.com/show_bug.cgi?id=1182486
When updating a network and adding new ip-dhcp-host entry, the deamon
may crash. The problem is, we iterate over existing <host/> entries
trying to compare MAC addresses to see if there's already an existing
rule. However, not all entries are required to have MAC address. For
instance, the following is perfectly valid entry:
<host id='00:04:58:fd:e4:15:1b:09:4c:0e:09:af:e4:d3:8c:b8:ca:1e'
name='redhatipv6.redhat.com' ip='2001:db8:ca2:2::119'/>
When the checking loop iterates over this, the entry's MAC address is
accessed directly. Well, the fix is obvious - check if the address is
defined before trying to compare it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
Every dtrace/systemd probe also include a libvirt log message.
These are logged at level DEBUG currently, which means if you
want to see all probes they are drowned by the rest of the
DEBUG messages. Since we don't really use the INFO log level
for much, it seems reasonable to suggest we log all probes at
level INFO.
When debugging libvirt it is helpful to set probes around RPC
calls. We already have probes for libvirt's native RPC layer,
so it makes sense to add them for the DBus RPC layer too.
systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.
This falls back to the old CreateMachine method when the new
one is not supported.
https://bugzilla.redhat.com/show_bug.cgi?id=1181182
When we meet error in qemuMigrationPrepareAny and goto
cleanup with rc < 0, we forget clear the priv->origname and this
will make this vm migrate fail next time because leave a wrong
origname in priv, and will Generate a wrong cookie when do
migrate next time.
This patch will make priv->origname is NULL when migrate fail
in target host.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Make local copy of the disk alias in qemuProcessInitPasswords,
instead of referencing the one in domain definition, which
might get freed if the domain crashes while we're in monitor.
Also copy the memballoon period value.
Make a local copy of the disk alias instead of pointing
to the domain definition, which might get freed if
the domain dies while we're in monitor.
Also exit early if that happens.
Exit the monitor right after we've done with it to get
the virDomainObjPtr lock back, otherwise we might be accessing
vm->def while it's being cleaned up by qemuProcessStop.
If the domain crashed while we were in the monitor, exit
early instead of changing vm->def which is now the persistent
definition.
The domain might disappear during the time in monitor when
the virDomainObjPtr is unlocked, so the caller needs to check
if it's still alive.
Since most of the callers are going to need it, put the
check inside qemuDomainObjExitMonitor and return -1 if
the domain died in the meantime.
The virsh start <domain> fails with qemu error when the hostdevices of the
same iommu group are used actively by other vms. It is not clear which
hostdev from the same iommu group is used by any of the running guests.
User has to go through every guest xml to figure out who is using the
hostdev of same iommu group.
Solution:
Iterate the iommu group of the hostdev and error our neatly in case a
device in the same iommu group is busy. Reattach code also does the same
kind of check, remove duplicate code as well.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Basically a getter function which is implemented for accessing the
address fields in virPCIDevice.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that xenconfig supports parsing and formatting Xen's
XL config format, integrate it into the libxl driver's
connectDomainXML{From,To}Native functions.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add disk and spice config tests for the xen_xl config parser
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduce a parser/formatter for the xl config format. Since the
deprecation of xm/xend, the VM config file format has diverged as
new features are added to libxl. This patch adds support for parsing
and formating the xl config format. It supports the existing xm config
format, plus adds support for spice graphics and xl disk config syntax.
Disk config is specified a bit differently in xl as compared to xm. In
xl, disk config consists of comma-separated positional parameters and
keyword/value pairs separated by commas. Positional parameters are
specified as follows
target, format, vdev, access
Supported keys for key=value options are
devtype, backendtype
The positional paramters can also be specified in key/value form. For
example the following xl disk config are equivalent
/dev/vg/guest-volume,,hda
/dev/vg/guest-volume,raw,hda,rw
format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume
See $xen_sources/docs/misc/xl-disk-configuration.txt for more details.
xl disk config is parsed with the help of xlu_disk_parse() from
libxlutil, libxl's utility library. Although the library exists
in all Xen versions supported by the libxl virt driver, only
recently has the corresponding header file been included. A check
for the header is done in configure.ac. If not found, xlu_disk_parse()
is declared externally.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
QEMU internally updates the size of video memory if the domain XML had
provided too low memory size or there are some dependencies for a QXL
devices 'vgamem' and 'ram' size. We need to know about the changes and
store them into the status XML to not break migration or managedsave
through different libvirt versions.
The values would be loaded only if the "vgamem_mb" property exists for
the device. The presence of the "vgamem_mb" also tells that the
"ram_size" and "vram_size" exists for QXL devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The search is done recursively only through QOM object that has a type
prefixed with "child<" as this indicate that the QOM is a parent for
other QOM objects.
The usage is that you give known device name with starting path where to
search.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit e3435caf fixed hot-plugging of vcpus with strict memory pinning
on NUMA hosts, but unfortunately it also broke updating number of vcpus
for offline guests using our API.
The issue is that we try to create a cpu cgroup for non-running guest
which fails as there are no cgroups for that domain. We should create
cgroups and update cpuset.mems only if we are hot-plugging.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1165993
So, there are still plenty of vNIC types that we don't know how to set
bandwidth on. Let's warn explicitly in case user has requested it
instead of pretending everything was set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When create inactive external snapshot, after update disk definitions,
virDomainSaveConfig is needed, if not after restart libvirtd the new snapshot
file definitions in xml will be lost.
Reproduce steps:
1. prepare a shut off guest
$ virsh domstate rhel7 && virsh domblklist rhel7
shut off
Target Source
------------------------------------------------
vda /var/lib/libvirt/images/rhel7.img
2. create external disk snapshot
$ virsh snapshot-create rhel7 --disk-only && virsh domblklist rhel7
Domain snapshot 1417882967 created
Target Source
------------------------------------------------
vda /var/lib/libvirt/images/rhel7.1417882967
3. restart libvirtd then check guest source file
$ service libvirtd restart && virsh domblklist rhel7
Redirecting to /bin/systemctl restart libvirtd.service
Target Source
------------------------------------------------
vda /var/lib/libvirt/images/rhel7.img
This was first reported by Eric Blake
http://www.redhat.com/archives/libvir-list/2014-December/msg00369.html
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
There's this function virNetDevBandwidthParse which parses the
bandwidth XML snippet. But it's not clever much. For the
following XML it allocates the virNetDevBandwidth structure even
though it's completely empty:
<bandwidth>
</bandwidth>
Later in the code there are some places where we check if
bandwidth was set or not. And since we obtained pointer from the
parsing function we think that it is when in fact it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
The virCPUDefFormat* methods were relying on the VIR_DOMAIN_XML_*
flag definitions. It is not desirable for low level internal
functions to be coupled to flags for the public API, since they
may need to be called from several different contexts where the
flags would not be appropriate.
Well, since the link to the virConnectGetDomainCapabilities API is in
<pre/> section we must take special care about the spaces around the
link.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Ján Tomko