Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity identified that this variable might be leaked. And it's
right. If an error occurred and we have to roll back the control
jumps to try_remove label where we save the current error (see
0e82fa4c34 for more info). However, inside the code a jump onto
other label is possible thus leaking the error object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the newly introduced close callback helpers to make the code look just a
bit cleaner and more importantly, to fix the following memleak regarding a
dangling virAdmConnect object reference caused by assigning NULL to the close
callback data once the catch-disconnect routine used the callback followed
by a comparison of NULL to the originally defined close callback (which at that
moment had already been NULL'd by remoteAdminClientCloseFunc) in
virAdmConnectCloseCallbackUnregister.
717 (88 direct, 629 indirect) bytes in 1 blocks are definitely lost record
110 of 141
at 0x4C2A988: calloc (vg_replace_malloc.c:711)
by 0x530696F: virAllocVar (viralloc.c:560)
by 0x53689E6: virObjectNew (virobject.c:193)
by 0x5368B5E: virObjectLockableNew (virobject.c:219)
by 0x4E3E7EE: virAdmConnectNew (datatypes.c:900)
by 0x4E398BB: virAdmConnectOpen (libvirt-admin.c:220)
by 0x10D3E3: vshAdmConnect (virt-admin.c:161)
by 0x10D624: vshAdmReconnect (virt-admin.c:215)
by 0x10DB0A: cmdConnect (virt-admin.c:353)
by 0x11288F: vshCommandRun (vsh.c:1313)
by 0x10FDB6: main (virt-admin.c:1439)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357358
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, there were three different spots where closeCallback->freeCallback was
called, not looking the same --> potential for bugs - and there indeed is a bug
with refcounting of the @conn object. So this patch partially follows the path
set by commit 24dbb69f by introducing some close callback helpers both to
replace all the spots where we call clean the close callback data with a
dedicated function and to be able to fix the refcounting bug causing a memleak.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The only place we change the @conn object is actually virAdmConnectOpen
routine, thus at the moment we don't really need to lock it, given the fact that
what we're trying to do here is to change the closeCallback object which is a
lockable object itself, so that should be enough to avoid races.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In particular, pull in gnulib's fix for the broken SIZE_MAX on s390.
* .gnulib: Update to latest.
* bootstrap: Resync to upstream.
Signed-off-by: Eric Blake <eblake@redhat.com>
As was suggested in an earlier review comment[1], we can
catch some additional code points by cleaning up how we use the
hostdev subsystem type in some switch statements.
[1] End of https://www.redhat.com/archives/libvir-list/2016-September/msg00399.html
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The default browser line height is fine. Overriding it
causes <pre> blocks inside a <dl> to have enourmous
spacing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XML format main page has never had any content in it,
relying on the left navbar to provide links to the XML
schema pages. Since the navbar is gone, the page needs
to have some content created, otherwise it is useless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a bunch of pages which are either outdated, have no
content, or duplicate content better described elsewhere
in the site or wiki.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A combination of the index page, top nav bar and docs.html page
provide links to all pages on the site. The left hand nav bar
is thus redundant and can be removed to provide a simpler style
for the site.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The docs page is currently completely empty. Fill it in with
links to the various documentation, categorized as to whether
it is targetting people deploying libvirt, application
developers using libvirt, or people working on libvirt
itself.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previously the download page only covered the main libvirt
module and the app dev guide. Expand it to provide direct
links to all artifacts published by the project, whether
the main library, language bindings, docs, or testing.
Tweak the top table styling to better fit in with new
branding.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The front page contains a bunch of content that is either
outdated (eg links to libvirt qpid) or not particularly
useful (links to vendor hypervisor sites).
This rewrites it to be more directly useful to visitors,
providing a updated intro to libvirt project, direct
links to key pieces of website content (new contributors
guide, security process, bug reporting, XML formats), and
feed showing recent 5 blog posts on the virt tools planet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This reverts commit 1f29f3da06.
Assuming <dt> is always used to document symbols is way too
broad, requiring far too many exemptions to be marked to
avoid syntax check rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The related links page is either horribly outdated, or duplicating
stuff already linked elsewhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add links to download, communicate and learn in the
header bar, as the main jumping off points for
navigation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the 1px border underneath all headers and make them
use black text to simplify visual appearance
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a footer to all pages containing a blurb about the
code of conduct, and links to various communication
channels / social media / user self-help sites.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Replace the old "Made with libvirt" logo with links to the
new "Libvirt powered" logos, providing various sizes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Erik Skultety