Implement in virtNetClient and VirNetSocket the needed functions to
expose a new libssh transport, providing all the options that the
libssh2 transport supports.
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The default browser line height is fine. Overriding it
causes <pre> blocks inside a <dl> to have enourmous
spacing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XML format main page has never had any content in it,
relying on the left navbar to provide links to the XML
schema pages. Since the navbar is gone, the page needs
to have some content created, otherwise it is useless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a bunch of pages which are either outdated, have no
content, or duplicate content better described elsewhere
in the site or wiki.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A combination of the index page, top nav bar and docs.html page
provide links to all pages on the site. The left hand nav bar
is thus redundant and can be removed to provide a simpler style
for the site.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The docs page is currently completely empty. Fill it in with
links to the various documentation, categorized as to whether
it is targetting people deploying libvirt, application
developers using libvirt, or people working on libvirt
itself.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previously the download page only covered the main libvirt
module and the app dev guide. Expand it to provide direct
links to all artifacts published by the project, whether
the main library, language bindings, docs, or testing.
Tweak the top table styling to better fit in with new
branding.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The front page contains a bunch of content that is either
outdated (eg links to libvirt qpid) or not particularly
useful (links to vendor hypervisor sites).
This rewrites it to be more directly useful to visitors,
providing a updated intro to libvirt project, direct
links to key pieces of website content (new contributors
guide, security process, bug reporting, XML formats), and
feed showing recent 5 blog posts on the virt tools planet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This reverts commit 1f29f3da06.
Assuming <dt> is always used to document symbols is way too
broad, requiring far too many exemptions to be marked to
avoid syntax check rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The related links page is either horribly outdated, or duplicating
stuff already linked elsewhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add links to download, communicate and learn in the
header bar, as the main jumping off points for
navigation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the 1px border underneath all headers and make them
use black text to simplify visual appearance
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a footer to all pages containing a blurb about the
code of conduct, and links to various communication
channels / social media / user self-help sites.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Replace the old "Made with libvirt" logo with links to the
new "Libvirt powered" logos, providing various sizes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use a dark banner whose color matches the dark green used in
the logo. Introduce a newly rendered version of the header
logo derived from new SVG file, instead of old one from
(now lost) Adobe Illustrator file.
The top banner logo now links to the front page as is common
practice for most websites.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add the SVG files for the libvirt logo, along with corresponding
pre-rendered PNG bitmaps at key sizes. Also add a README file
describing how to modify the logos and their intended usages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The original libvirt logo was built using what appears to be
either Overpass font, or one stylistically very similar (the
slanted top of letters like 'l', 't', etc). The newly recreated
libvirt logo will use Overpass. Use this font for the website
text too, to provide a consistent style.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Release tarballs ship the include/libvirt/libvirt-common.h.
when srcdir != builddir we end up including libvirt-common.h twice: from
$top_srcdir/include/libvirt-common.h and from
$builddir/include/libvirt-common.h leading to
function virTypedParamsGetUInt from /tmp/buildd/libvirt-2.4.0/debian/build/docs/../include/libvirt/libvirt-common.h redeclared in /tmp/buildd/libvirt-2.4.0/docs/../include/libvirt/libvirt-common.h
function virTypedParamsAddBoolean from /tmp/buildd/libvirt-2.4.0/debian/build/docs/../include/libvirt/libvirt-common.h redeclared in /tmp/buildd/libvirt-2.4.0/docs/../include/libvirt/libvirt-common.h
…
Only add the builddir to the search list if there is no pregenerated
libvirt-common.h.
Reuse the existing check that predates the libvirt.h → libvirt-common.h
split and that probably was meant for exactly that.
References: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=842452
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The library.xen file contains a braindump of thoughts dating
from the very first days of libvirt, when it was briefly
called libxen. This is not useful and potentially misleading
or confusing for people.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.
All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357
When support was added for the kvm hidden='on' attribute in commit
d07116, the version requirement was listed as "2.1.0 (QEMU
only)". However, this was added when libvirt was at version 1.2.8 - it
is *QEMU* that must be at version 2.1.0 or later.
This went unnoticed for a very long time (over 2 years). Then a week
or two ago a new Windows convert in the #virt channel on OFTC was told
he needed to use this feature (to prevent nvidia drivers in a guest
from refusing to work due to being run in a virtual machine). There
was some problem with it being recognized and "someone" (it may have
been me, or may have been someone else, I don't remember) pointed out
that the documentation at
http://www.libvirt.org/formatdomain.html
says that it requires libvirt 2.1.0. The next several days were filled
with agony as a new convert to Linux first tried to upgrade a Linux
Mint host running their "LTS" version to something newer, then tried
to install a libvirt build built for Ubuntu onto this, and later back
to the old LTS Linux Mint. After this he tried building his own
libvirt from source (with all the expected problems), and finally
switched to Fedora. In the end it was hours and hours of everybody's
lives that they will never get back. To now learn that he didn't need
to do this (his original libvirt version was 1.3.3, so whatever his
problem was, it was elsewhere) makes the pain all that much worse.
To prevent this from happening again, this simple patch changes the
version requirement for the kvm hidden attribute from "2.1.0 (QEMU
only)" to "1.2.8 (QEMU 2.1.0)".
So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The domain capabilities XML is capable of showing whether each guest CPU
mode is supported or not with a possibility to provide additional
details. This patch enhances host-model capability to advertise the
exact CPU model which will be used as a host-model:
<cpu>
...
<mode name='host-model' supported='yes'>
<model fallback='allow'>Broadwell</model>
<vendor>Intel</vendor>
<feature policy='disable' name='aes'/>
<feature policy='require' name='vmx'/>
</mode>
...
</cpu>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The patch adds <cpu> element to domain capabilities XML:
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'/>
<mode name='custom' supported='yes'>
<model>Broadwell</model>
<model>Broadwell-noTSX</model>
...
</mode>
</cpu>
Applications can use it to inspect what CPU configuration modes are
supported for a specific combination of domain type, emulator binary,
guest architecture and machine type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1322717
During offline migration, no storage is copied. Nor disks, nor
NVRAM file, nor anything. We use qemu for that and because domain
is not running there's nobody to copy that for us.
We should document this to avoid confusing users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new secret usage type known as "tls" - it will handle adding the
secret objects for various TLS objects that need to provide some sort
of passphrase in order to access the credentials.
The format is:
<secret ephemeral='no' private='no'>
<description>Sample TLS secret</description>
<usage type='tls'>
<name>mumblyfratz</name>
</usage>
</secret>
Once defined and a passphrase set, future patches will allow the UUID
to be set in the qemu.conf file and thus used as a secret for various
TLS options such as a chardev serial TCP connection, a NBD client/server
connection, and migration.
Signed-off-by: John Ferlan <jferlan@redhat.com>
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Add support for using the new approach to hotplug vcpus using device_add
during startup of qemu to allow sparse vcpu topologies.
There are a few limitations imposed by qemu on the supported
configuration:
- vcpu0 needs to be always present and not hotpluggable
- non-hotpluggable cpus need to be ordered at the beginning
- order of the vcpus needs to be unique for every single hotpluggable
entity
Qemu also doesn't really allow to query the information necessary to
start a VM with the vcpus directly on the commandline. Fortunately they
can be hotplugged during startup.
The new hotplug code uses the following approach:
- non-hotpluggable vcpus are counted and put to the -smp option
- qemu is started
- qemu is queried for the necessary information
- the configuration is checked
- the hotpluggable vcpus are hotplugged
- vcpus are started
This patch adds a lot of checking code and enables the support to
specify the individual vcpu element with qemu.
Individual vCPU hotplug requires us to track the state of any vCPU. To
allow this add the following XML:
<domain>
...
<vcpu current='2'>3</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
<vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
<vcpu id='1' enabled='no' hotpluggable='yes'/>
</vcpus>
...
The 'enabled' attribute allows to control the state of the vcpu.
'hotpluggable' controls whether given vcpu can be hotplugged and 'order'
allows to specify the order to add the vcpus.
For some unknown reason the original implementation of the <forwarder>
element only took advantage of part of the functionality in the
dnsmasq feature it exposes - it allowed specifying the ip address of a
DNS server which *all* DNS requests would be forwarded to, like this:
<forwarder addr='192.168.123.25'/>
This is a frontend for dnsmasq's "server" option, which also allows
you to specify a domain that must be matched in order for a request to
be forwarded to a particular server. This patch adds support for
specifying the domain. For example:
<forwarder domain='example.com' addr='192.168.1.1'/>
<forwarder domain='www.example.com'/>
<forwarder domain='travesty.org' addr='10.0.0.1'/>
would forward requests for bob.example.com, ftp.example.com and
joe.corp.example.com all to the DNS server at 192.168.1.1, but would
forward requests for travesty.org and www.travesty.org to
10.0.0.1. And due to the second line, requests for www.example.com,
and odd.www.example.com would be resolved by the libvirt network's own
DNS server (i.e. thery wouldn't be immediately forwarded) even though
they also match 'example.com' - the match is given to the entry with
the longest matching domain. DNS requests not matching any of the
entries would be resolved by the libvirt network's own DNS server.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1331796
If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.
This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:
<dns enable='no'/>
to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).
The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
https://bugzilla.redhat.com/show_bug.cgi?id=1353296
On UNIX like systems there are no constraints on what characters
can be in file/dir names (except for NULL, obviously). Moreover,
some values that we think of as paths (e.g. disk source) are not
necessarily paths at all. For instance, some hypervisors take
that as an arbitrary identifier and corresponding file is then
looked up by hypervisor in its table. Instead of trying to fix
our regular expressions (and forgetting to include yet another
character there), lets drop the validation completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I apparently misunderstood Marcel's description of what could and
couldn't be plugged into qemu's pxb-pcie controller (known as
pcie-expander-bus in libvirt) - I specifically allowed directly
connecting a pcie-switch-upstream-port, and it turns out that causes
the guest kernel to crash.
This patch forbids such a connection, and updates the xml docs
appropriately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1361172
So, I've ran into very interesting problem lately. When doing the
following, I've encountered an error:
libvirt.git $ make dist && tar -xJf libvirt-2.2.0.tar.xz && \
cd libvirt-2.2.0 && ./configure && \
rm docs/formatdomain.html && make -C docs
make: Entering directory 'docs'
make: *** No rule to make target 'formatdomain.html', needed by 'web'. Stop.
make: Leaving directory 'docs'
I had no idea what was going on, so I've nailed down the commit
that "broke it" via running git-bisect. It was this one:
7659bd9221. But that shed no more light until I realized
that the commit might actually just exposed a problem we had. And
guess what - I've nailed it down. Of course we are not
distributing subsite.xsl that's why make prints error message.
Very misleading one I must say.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.
To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: Chunyan Liu <cyliu@suse.com>
This patch reflects cases when <interface> element and its <source>
subelement for network type are formated based on actual type resolved
from referenced network instead of original one. networkAllocateActualDevice
and virDomainActualNetDefContentsFormat are taken as reference.
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Kimchi is a open-source interface to kvm. It runs with HTML5, simple and
easy to manage kvm guests.
Signed-off-by: Ramon Medeiros <ramonn@linux.vnet.ibm.com>
Most of the lines we look at are not going to match one of the
driver types contained in $groups_regex.
Move on to the next line if it does not contain any of them early.
This speeds up the script execution by 50%, since this simple regex
does not have any capture groups.
The %groups hash contains all the driver types (e.g.
virHypervisorDriver or virSecretDriver).
When searching for all the APIs that are implemented by a driver
of that specific driver type, we keep iterating over the %groups
hash on every line we look at, then matching against the driver type.
This is inefficient because it prevents perl from caching the regex
and it executes the regex once for every driver type, even though
one regex matching excludes all the others, since all the driver types
are different.
Construct the regex containing all the driver types upfront to save
about 6.4s (~98%) of the script execution time.
When generating the hvsupport.html.in file, we parse the -api.xml
files generated by apibuild.py to know in which HTML file the API
function is.
Doing an XPath query for every single 'function' element in the
file is inefficient.
Since the XML file is generated by another of our build scripts
(apibuild.py, using Python's standard 'output.write' XML library),
just find the function name->file mapping by a regex upfront.
Also add a note about this next to the line that generates it
in apibuild.py and do not check if XML::XPath is installed in
bootstrap since we no longer use it.
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Commit id's 'c8438010', '9bbf0d7e', and '2552fec24' altered the documentation
to describe adding a 'passphrase' type secret usage model in order to reference
the secret for a luks volume. After commit, it was deemed that a 'volume'
usage model should be used, so adjust the various documents in order rephrase
descriptions in order to follow the correct usage model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types if needed, and 2) we can retain the info
when set to an invalid interface type all the way through to
validation and report a proper error, rather than just ignoring it
(which is currently what happens for many other type-specific
settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
(This patch had been pushed earlier in
commit fe6a77898a, but was reverted in
commit d658456530 because it had been
accidentally pushed during the freeze for release 2.0.0)
The peer attribute is used to set the property of the same name in the
interface IP info:
<interface type='ethernet'>
...
<ip family='ipv4' address='192.168.122.5'
prefix='32' peer='192.168.122.6'/>
...
</interface>
Note that this element is used to set the IP information on the
*guest* side interface, not the host side interface - that will be
supported in an upcoming patch.
(This patch now has quite a history: it was originally pushed in
commit 690969af, which was subsequently reverted in commit 1d14b13f,
then reworked and pushed (along with a lot of other related/supporting
patches) in commit 93135abf1; however *that* commit had been
accidentally pushed during dev. freeze for release 2.0.0, so it was
again reverted in commit f6acf039f0).
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.
This code will make use of the virSecretLookup{Parse|Format}Secret common code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new secret type known as "passphrase" - it will handle adding the
secret objects that need a passphrase without a specific username.
The format is:
<secret ...>
<uuid>...</uuid>
...
<usage type='passphrase'>
<name>mumblyfratz</name>
</usage>
</secret>
Signed-off-by: John Ferlan <jferlan@redhat.com>
I can't think of any good reason to do either of those, and having the
examples there will just lead to unusable patch emails from people who
can't be bothered to read the entire page.
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
The peer attribute is used to set the property of the same name in the
interface IP info:
<interface type='ethernet'>
...
<ip family='ipv4' address='192.168.122.5'
prefix='32' peer='192.168.122.6'/>
...
</interface>
Note that this element is used to set the IP information on the
*guest* side interface, not the host side interface - that will be
supported in an upcoming patch.
(This is an updated *re*-commit of commit 690969af, which was
subsequently reverted in commit 1d14b13f).
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
a.k.a. <hostdev mode='capabilities' type='net'>.
This replaces the existing nips, ips, nroutes, and routes with a
single virNetDevIPInfo, and simplifies the code by calling that
object's parse/format/clear functions instead of open coding.
There are currently two places in the domain where this combination is
used, and there is about to be another. This patch puts them together
for brevity and uniformity.
As with the newly-renamed virNetDevIPAddr and virNetDevIPRoute
objects, the new virNetDevIPInfo object will need to be accessed by a
utility function that calls low level Netlink functions (so we don't
want it to be in the conf directory) and will be called from multiple
hypervisor drivers (so it can't be in any hypervisor directory); the
most appropriate place is thus once again the util directory.
The parse and format functions are in conf/domain_conf.c because only
the domain XML (i.e. *not* the network XML) has this exact combination
of IP addresses plus routes. Note that virDomainNetIPInfoFormat() will
end up being the only caller to virDomainNetRoutesFormat() and
virDomainNetIPsFormat(), so it will just subsume those functions in a
later patch, but we can't do that until they are no longer called.
(It would have been nice to include the interface name within the
virNetDevIPInfo object (with a slight name change), but that can't
be done cleanly, because in each case the interface name is provided
in a different place in the XML relative to the routes and IP
addresses, so putting it in this object would actually make the code
more confused rather than simpler).
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).
When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.
In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.
This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.
NB: I decided on this course of action after mentioning the
inconsistency here:
https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html
and getting encouragement do eliminate it in a later IRC discussion
with danpb.
This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Many moons ago, commit id '8d7800a55' adjusted the format of the output
to add a space on the HEADER and the DATA... the docs weren't updated to
reflect that... This makes that adjustment.
In the case of chassisNr (used to set chassis_nr of a pci-bridge
controller), 0 is reserved for / used by the pci[e]-root bus. In the
base of busNr, a value of 0 would mean that the root bus had no places
available to plug in new buses, including the pxb itself (the
documentation I wrote for pxb even noted the limit of busNr as 1.254).
NB: oddly, the "chassis" attribute, which is used for pcie-root-port
and pcie-switch-downstream-port *can* be set to 0, since it's the
combination of {chassis, slot} that needs to be unique, not chassis by
itself (and slot 0 of pcie-root is reserved, while pcie-*-port can use
*only* slot 0).
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1342962
There was no documentation at all for the XML part. I added at least
some. The 2.0.0 introduction date is deliberate as the parser for the
XML is broken.
The schema file was missing entries for 'mbml' and 'mbmt'.
This allows us to produce releases that are roughly a third in
size, have no limitation on path length, and are still readable
by all supported platforms.
I screwed up by accidentally pushing incomplete version of the
renumbering commit. This patch just fixes the rest so the tree matches
changes in v2.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This bumps the release number of 2.0.0, to reflect the switch to
a new time based release versioning scheme. The downloads page
is updated to describe our policies for release schedules and
release version numbering
The stable release docs are changed to reflect the fact that
the stable version numbers are now just 3 digits long instead
of 4.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively. It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This new listen type is currently supported only by spice graphics.
It's introduced to make it easier and clearer specify to not listen
anywhere in order to start a guest with OpenGL support.
The old way to do this was set spice graphics autoport='no' and don't
specify any ports. The new way is to use <listen type='none'/>. In
order to be able to migrate to old libvirt the migratable XML will be
generated without the listen element and with autoport='no'. Also the
old configuration will be automatically converted to the this listen
type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add support for a "tls_priority" URI parameter in remote
driver URIs. eg
qemu+tls://localhost/session?tls_priority=NORMAL:-VERS-SSL3.0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I was asked the other day what's event loop and how libvirt uses
it. Well, I haven't found any good sources on the Internet so I
thought of writing the documentation on my own.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 38df47c9af I've tried to prepare our apibuild.py script for
change made in 0628f3498c (1U << 31). What I've done in the
former commit was to replace \d+U in parsed tokens with \d.
Problem was, my regular expression there was not quite right as
it also translated VIR_123U_VAL into VIR_123_VAL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The apibuild script is a terrifying beast that parses some source
files of ours and produces an XML representation of them. When it
comes to parsing enums we have in some header files, it tries to
be clever and detect a value that an enum member has (or if it is
an alias for a different member). Whilst doing that it has to
deal with values we give to the members in many formats. At some
places we just pass the value in decimal:
VIR_DOMAIN_BLOCK_JOB_TYPE_PULL = 1,
in other places, we use the aliasing:
VIR_CONNECT_GET_ALL_DOMAINS_STATS_ACTIVE = VIR_CONNECT_LIST_DOMAINS_ACTIVE,
and in other places bitwise shifts are used:
VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS = 1 << 31, /* enforce requested stats */
The script tries to parse all of these resulting in the following
tokens: "1", "VIR_CONNECT_LIST_DOMAINS_ACTIVE", "1<<31"; Then, the
script tries to turn these into integers using python's eval()
function. This function succeeds on the first and the last
tokens. But, if we were to modify the last example so that it's
of the following form:
VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS = 1U << 31, /* enforce requested stats */
the token representing enum's member value will then be "1U<<31".
So our parsing is good. Unfortunately, python is not aware of the
difference between signed and unsigned C types, therefore eval()
fails over this token and the parser falls back thinking it's an
alias to another enum member. Well it's not.
The solution is to transform [0-9]U into [0-9] as for our
purposes here it's the same thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.
The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.
With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-switch-upstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
...
These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
Add a new element to <domain> XML:
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
To supply a path to a SLIC (Software Licensing) ACPI
table blob.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
Prior to this, <address type='pci'/> wasn't allowed when parsing
(domain+bus+slot+function needed to be a "valid" PCI address, meaning
that at least one of domain/bus/slot had to be non-0), the RNG
required bus to be specified, and if type was set to PCI when
formatting, domain+bus+slot+function would always be output.
This makes all the address attributes optional during parse and RNG
validation, and suppresses domain+bus+slot+function if domain+bus+slot
are all 0 (NB: if d+b+s are all 0, any value for function is
nonsensical as that will never happen in the real world, and after
the next patch we will always assign a real working address to any
empty PCI address before it is ever output to anywhere).
Note that explicitly setting all attributes to 0 is equivalent to
setting none of them, which is okay, since 0000:00:00 is reserved in
any PCI bus setup, and can't be used anyway.
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element. This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All the accesses to files outside our build or source directories
are now identified and appended into a file for later processing.
The location of the file that contains all the records can be
controlled via VIR_TEST_FILE_ACCESS env variable and defaults to
abs_builddir "/test_file_access.txt".
The script that will process the access file is to be added in
next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1265694
Commit id '020135dc' didn't quite get the algorithm correct when a
device mapper source ended with a non numeric value (e.g. ends with
an alphabet value).
This patch modifies the 'part_separator' logic to add the "p" separator
to the attempted target path name only when specified as part_separator='yes'.
For a source name that already ends with a number, the logic doesn't change
as the part separator would need to be there.
For a source name that ends with something other than a number, this allows
the possibility that a "p" separator can be added. The default for one of
these source devices is to not add the separator.
The key for device mapper and the need for a partition separator "p" is
the presence of a number in the last character of the device name link
in /dev/mapper. A name such as "/dev/mapper/mpatha1" would generate
a "/dev/mapper/mpatha1p1" partition, while "/dev/mapper/mpatha" would
generate partition "/dev/mapper/mpatha1". Similarly for a device
mapper entry not using friendly names or an alias, a device such as
"/dev/mapper/3600a0b80005b10ca00005ad656fd8d93" would generate a
paritition "/dev/mapper/3600a0b80005b10ca00005ad656fd8d93p1", while
a device such as "/dev/mapper/3600a0b80005b10ca00005e115729093f" would
generate a partition "/dev/mapper/3600a0b80005b10ca00005e115729093f1".
The long number is the WWID of the device. It's also possible to assign
an alias for a device mapper entry, that alias follows the same rules
with respect to ending with a number or not when adding a "p" to create
the target device path.
SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.
This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.
Requires adding the plumbing for <device><video>
The value is <enum name='modelType'> to match the associated domain
XML of <video><model type='XXX'/>
Wire it up for qemu too
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.
Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
Rather than be specific about which devices in the <iothreads> description,
let's leave that for the <disk> description for it's <iothread> value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This adds a ports= attribute to usb controller XML, like
<controller type='usb' model='nec-xhci' ports='8'/>
This maps to:
qemu -device nec-usb-xhci,p2=8,p3=8
Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.
https://bugzilla.redhat.com/show_bug.cgi?id=1271408
If a panic device is being defined without a model in a domain
the default value is always overwritten with model ISA. An ISA
bus does not exist on S390 and therefore specifying a panic device
results in an unsupported configuration.
Since the S390 architecture inherently provides a crash detection
capability the panic device should be defined in the domain xml.
This patch adds an s390 panic device model and prevents setting a
device address on it.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There were few things done in the nodedev code but we were lacking tests
for it. And because of that we missed that the schema was not updated
either. Fix the schema and add various test files to show the schema
is correct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit 690969af9c, which
added the domain config parts to support a "peer" attribute in domain
interface <ip> elements.
It's being removed temporarily for the release of libvirt 1.3.4
because the feature doesn't work, and there are concerns that it may
need to be modified in an externally visible manner which could create
backward compatibility problems.
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45
However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:
http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html
Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely
https://bugzilla.redhat.com/show_bug.cgi?id=1074464
All top-level functions have been moved to this class.
On top of that, the app.warning() method has been defined,
so that calls to it - already present in rebuild() - can
actually succeed.
Since commit d195cffa2e, both $(srcdir) and $(abs_builddir)
are passed to the apibuild.py script; however, since the
former is a relative path and the latter an absolute one, the
script might not be able to detect whether they point to the
same location.
Pass both as relative paths to avoid the issue.
When describing attributes and elements, we mostly stick to
a certain pattern; however, there are a few cases when the
information is not presented in the usual way.
Since there doesn't seem to be any reason not to follow the
tried and true formula, rework those bits to fit the rest of
the documentation.
Commit 61b070cf20 cleaned up a number of cases where the <dt>
element was used to document symbols, but the symbol itself was
not inside a <code> element.
To make sure we don't end up having to clean up again a few
months from now, introduce a syntax-check rule that can spot
such mistakes.
All existing exceptions are marked as such, with either file
or line granularity depending on the case.
libvirt-common.h is generated into builddir/include/libvirt. apibuild.py
only operated on srcdir/inlcude/libvirt. With VPATH build
srcdir/docs/libvirt-libvirt-common.html would not get generated and make
RPM failed.
Add bolding for <dt><code> elements to make them "stick out" on the
page rather that just a stream of text where the elements only differ
by slightly different font style.
IGMP is used on IPv4 networks tp setup multicast group memberships. On
IPv6, this job is done by Multicast Listener Discovery (MLD), which
uses ICMPv6 packets rather than its own IP protocol number like IGMP.
The nwfilter documentation lists "igmp-ipv6" as one of the possible
protocols, but this is ignored (and stripped from the xml). This patch
removes that erroneous reference.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1038888
Since commit f5d9c5d00c moved the virTypedParam stuff into
libvirt-common we did not generate any docs for them and neither did we
populate them into libvirt-api.xml. This broke the sanity check in
libvirt python. Fix it by generating docs for libvirt-common.h too.
Some macros don't make sense to be documented at all. Add infrastructure
to the web/api generator and add VIR_DEPRECATED and VIR_EXPORT_VAR as
macros we should not document.
Our uninstall script is not exact counterpart of install one.
Therefore we are leaving couple of files behind. This should not
happen.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While we could leave it behind as an indelible sign that libvirt
has been running on host, other users might not be that fond of
it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
This is especially useful for "bus", since the bus of a device's pci
address is matched to the "index" of a controller to determine which
bus it will be connected to, and "index" is always specified in
decimal - being able to specify both in decimal at least makes it
easier to assure a device is being assigned to the correct bus when it
is added. For the other attributes, it is just a convenience.
(MB: the parser already allows for any of these attributes to be given
in decimal, and there are even examples floating around on the
internet that give them in decimal rather than hex (written in the
days before virsh did schema validation on all XML). This only updates
the schema to match the parser.)
Pino Toscano