bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:
- Introducr 'gop' video device type
- Add capabilities probing for the 'fbuf' device that's
responsible for graphics
- Update command builder routines to let users configure
domain's VNC via gop graphics.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.
It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.
Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.
Take the opporunity to also change the function names and in one case
the parameters slightly
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.
Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.
While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
As bhyve for a long time didn't have a notion of the explicit SATA
controller and created a controller for each drive, the bhyve driver
in libvirt acted in a similar way and didn't care about the SATA
controllers and assigned PCI addresses to drives directly, as
the generated command will look like this anyway:
2:0,ahci-hd,somedisk.img
This no longer makes sense because:
1. After commit c07d1c1c4f it's not possible to assign
PCI addresses to disks
2. Bhyve now supports multiple disk drives for a controller,
so it's going away from 1:1 controller:disk mapping, so
the controller object starts to make more sense now
So, this patch does the following:
- Assign PCI address to SATA controllers (previously we didn't do this)
- Assign disk addresses instead of PCI addresses for disks. Now, when
building a bhyve command, we take PCI address not from the disk
itself but from its controller
- Assign addresses at XML parsing time using the
assignAddressesCallback. This is done mainly for being able to
verify address allocation via xml2xml tests
- Adjust existing bhyvexml2{xml,argv} tests to chase the new
address allocation
This patch is largely based on work of Fabian Freyer.
Added create/define/etc pool operations for vstorage backend.
Used the common/local pool API's from storage_util for operations
that are not specific to vstorage. In particular Refresh and Delete
Pool operations as well as all the Volume operations.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The file became a garbage dump for all kinds of utility functions over
time. Move them to a separate file so that the files can become a clean
interface for the storage backends.
Implement compare for s390. Required to test the guest against the host for
guest cpu model runnability checking. We always return IDENTICAL to bypass
Libvirt's checking. s390 will rely on Qemu to perform the runnability checking.
Implement update for s390. required to support use of cpu "host-model" mode.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Jiri Denemark <jdenemar@redhat.com>
This module will be used to track:
<domain, mac address list>
pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests. Provide the basic infrastructure
for these tasks.
The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Implement a new libssh transport, which uses libssh to communicate with
remote hosts, and add all the build system stuff (search of libssh,
private symbols, etc) to built it.
This new transport supports all the common ssh authentication methods,
making use of libvirt's auth callbacks for interaction with the user.
Well, there were three different spots where closeCallback->freeCallback was
called, not looking the same --> potential for bugs - and there indeed is a bug
with refcounting of the @conn object. So this patch partially follows the path
set by commit 24dbb69f by introducing some close callback helpers both to
replace all the spots where we call clean the close callback data with a
dedicated function and to be able to fix the refcounting bug causing a memleak.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The reworked API is now called virCPUUpdate and it should change the
provided CPU definition into a one which can be consumed by the QEMU
command line builder:
- host-passthrough remains unchanged
- host-model is turned into custom CPU with a model and features
copied from host
- custom CPU with minimum match is converted similarly to host-model
- optional features are updated according to host's CPU
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Node device lifecycle event API entry points for registering and
deregistering node deivce events, as well as types of events
associated with node device.
These entry points will be used for implementing asynchronous
lifecycle events.
Node device API:
virConnectNodeDeviceEventRegisterAny
virConnectNodeDeviceEventDeregisterAny
virNodeDeviceEventLifecycleType which has events CREATED and DELETED
First, remove escaped newlines and split up the string into an argv-list for
the bhyve and loader commands, respectively. This is done by iterating over the
string splitting it by newlines, and then re-iterating over each line,
splitting it by spaces.
Since this code reuses part of the code of qemu_parse_command.c
(in bhyveCommandLine2argv), add the appropriate copyright notices.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Unconditionally use gnulib's getopt module. This is needed by the bhyve driver
to provide a reentrant interface for getopt.
Several gnulib headers rely on features.h being included by ctype.h to provide
__GNUC_PREREQ, but on systems without glibc, this is not provided. In these
cases __GNUC_PREREQ gets redefined to 0, which causes build errors from checks
in src/internal.h.
Therefore, define __GNUC_PREREQ as early as possible. config-post.h is probably
the first header that is included, before any other headers.
Pretending (partial) support for something we don't understand is risky.
Reporting a failure is much better.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
Move to virsecret.c and rename to virSecretLookupParseSecret. Also convert
to usage xmlNodePtr and virXMLPropString rather than virXPathString.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.
To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move all APIs with a virHostMEM name prefix out into new
util/virhostmem.h & util/virhostmem.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.
This API will then be shareable with qemu-img and the need to build
a security object for luks support.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Call the internal driver callbacks rather than the public APIs to avoid
calling unnecessarily the error dispatching code and don't overwrite
the error messages provided by the APIs. They are good enough to
describe which secret is missing either by UUID or the usage (basically
name).
Add the functions to add/remove elements from the hashed secret obj list.
These will replace secret_driver functions secretAssignDef and secretObjRemove.
The virSecretObjListAddLocked will perform the necessary lookups and
decide whether to replace an existing hash entry or create a new one.
This includes setting up the configPath and base64Path as well as being
able to support the caller's need to restore from a previous definition
in case something goes wrong in the caller.
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit e72667bd tried to fix the incorrect file ordering in po/POTFILES.in
except it didn't, since the sort was run using locale en_US instead of
using locale C which is the default in libvirt. So this patch hopefully fixes
it for good.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When it comes to a situation that a new translatable file needs to be added
into the list of files, an automatically generated patch is proposed during
syntax-check. However, the diff was made against a sorted list of files and
the same sorted list of files + the new file that actually needs to be added
into the list. Since we do not keep POTFILES sorted, the proposed patch thus
can't be applied...most of the time - depending on the context.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
These functions are going to be reused very shortly. So instead
of duplicating the code, lets move them into utils module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The problem with the original virLogParseOutputs method was that the way it
parsed the input, walking the string char by char and using absolute jumps
depending on the virLogDestination type, was rather complicated to read.
This patch utilizes virStringSplit method twice, first time to filter out any
spaces and split the input to individual log outputs and then for each
individual output to tokenize it by to the parts according to our
PRIORITY:DESTINATION?(:DATA) format. Also, to STREQLEN for matching destination
was replaced with virDestinationTypeFromString call.
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This change is merely because admin_server would contain all the code
from dispatchers and helpers to the actual APIs. Admin should have
similar structure to the daemon-side remote driver - dispatchers and
helpers in a separate module, APIs in a separate module.
Best viewed with -M.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.
Make qemuDomainSupportsPCI non static.
Also, move and rename the following:
qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceBridgeConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.
Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.
Narrowed down the list of #include's in the split out module to
those that are necessary for build.
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a new API to get libvirt version. It is worth noting, that
libvirt-admin and libvirt share the same version number. Unfortunately,
our existing API isn't generic enough to be used with virAdmConnectPtr
as well. Also this patch wires up this API to the virt-admin client
as a generic cmdVersion command.
John Ferlan