The wireshark-2.4.0 is almost 2 years old now. Assuming anybody
interested in running latest libvirt doesn't run old wireshark,
it is safe to do this. It also simplifies the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since wirshark-2.5.0 toplevel plugins are no longer loaded. Only
plugins from epan/, wiretap/ or codecs/ subdirs are. Update the
plugin dir we generate. This is safe to do even for older
wiresharks, since they load plugins from there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past (when both libvirt and firewalld used iptables), if either
libvirt's rules *OR* firewalld's rules accepted a packet, it would
be accepted. This was because libvirt and firewalld rules were
processed during the same kernel hook, and a single ACCEPT result
would terminate the rule traversal and cause the packet to be
accepted.
But now firewalld can use nftables for its backend, while libvirt's
firewall rules are still using iptables; iptables rules are still
processed, but at a different time during packet processing
(i.e. during a different hook) than the firewalld nftables rules. The
result is that a packet must be accepted by *BOTH* the libvirt
iptables rules *AND* the firewalld nftable rules in order to be
accepted.
This causes pain because
1) libvirt always adds rules to permit DNS and DHCP (and sometimes
TFTP) from guests to the host network's bridge interface. But
libvirt's bridges are in firewalld's "default" zone (which is usually
the zone called "public"). The public zone allows ssh, but doesn't
allow DNS, DHCP, or TFTP. So even though libvirt's rules allow the
DHCP and DNS traffic, the firewalld rules (now processed during a
different hook) dont, thus guests connected to libvirt's bridges can't
acquire an IP address from DHCP, nor can they make DNS queries to the
DNS server libvirt has setup on the host. (This could be solved by
modifying the default firewalld zone to allow DNS and DHCP, but that
would open *all* interfaces in the default zone to those services,
which is most likely not what the host's admin wants.)
2) Even though libvirt adds iptables rules to allow forwarded traffic
to pass the iptables hook, firewalld's higher level "rich rules" don't
yet have the ability to configure the acceptance of forwarded traffic
(traffic that is going somewhere beyond the host), so any traffic that
needs to be forwarded from guests to the network beyond the host is
rejected during the nftables hook by the default zone's "default
reject" policy (which rejects all traffic in the zone not specifically
allowed by the rules in the zone, whether that traffic is destined to
be forwarded or locally received by the host).
libvirt can't send "direct" nftables rules (firewalld only supports
direct/passthrough rules for iptables), so we can't solve this problem
by just sending explicit nftables rules instead of explicit iptables
rules (which, if it could be done, would place libvirt's rules in the
same hook as firewalld's native rules, and thus eliminate the need for
packets to be accepted by both libvirt's and firewalld's own rules).
However, we can take advantage of a quirk in firewalld zones that have
a default policy of "accept" (meaning any packet that doesn't match a
specific rule in the zone will be *accepted*) - this default accept will
also accept forwarded traffic (not just traffic destined for the host).
Of course we don't want to modify firewalld's default zone in that
way, because that would affect the filtering of traffic coming into
the host from other interfaces using that zone. Instead, we will
create a new zone called "libvirt". The libvirt zone will have a
default policy of accept so that forwarded traffic can pass and list
specific services that will be allowed into the host from guests (DNS,
DHCP, SSH, and TFTP).
But the same default accept policy that fixes forwarded traffic also
causes *all* traffic from guest to host to be accepted. To close this
new hole, the libvirt zone can take advantage of a new feature in
firewalld (currently slated for firewalld-0.7.0) - priorities for rich
rules - to add a low priority rule that rejects all local traffic (but
leaves alone all forwarded traffic).
So, our new zone will start with a list of services that are allowed
(dhcp, dns, tftp, and ssh to start, but configurable via any firewalld
management application, or direct editing of the zone file in
/etc/firewalld/zones/libvirt.xml), followed by a low priority
<reject/> rule (to reject all other traffic from guest to host), and
finally with a default policy of accept (to allow forwarded traffic).
This patch only creates the zonefile for the new zone, and implements
a configure.ac option to selectively enable/disable installation of
the new zone. A separate patch contains the necessary code to actually
place bridge interfaces in the libvirt zone.
Why do we need a configure option to disable installation of the new
libvirt zone? It uses a new firewalld attribute that sets the priority
of a rich rule; this feature first appears in firewalld-0.7.0 (unless
it has been backported to am earlier firewalld by a downstream
maintainer). If the file were installed on a system with firewalld
that didn't support rule priorities, firewalld would log an error
every time it restarted, causing confusion and lots of extra bug
reports.
So we add two new configure.ac switches to avoid polluting the system
logs with this error on systems that don't support rule priorities -
"--with-firewalld-zone" and "--without-firewalld-zone". A package
builder can use these to include/exclude the libvirt zone file in the
installation. If firewalld is enabled (--with-firewalld), the default
is --with-firewalld-zone, but it can be disabled during configure
(using --without-firewalld-zone). Targets that are using a firewalld
version too old to support the rule priority setting in the libvirt
zone file can simply add --without-firewalld-zone to their configure
commandline.
These switches only affect whether or not the libvirt zone file is
*installed* in /usr/lib/firewalld/zones, but have no effect on whether
or not libvirt looks for a zone called libvirt and tries to use it.
NB: firewalld zones can only be added to the permanent config of
firewalld, and won't be loaded/enabled until firewalld is restarted,
so at package install/upgrade time we have to restart firewalld. For
rpm-based distros, this is done in the libvirt.spec file by calling
the %firewalld_restart rpm macro, which is a part of the
firewalld-filesystem package. (For distros that don't use rpm
packages, the command "firewalld-cmd --reload" will have the same
effect).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The %{extra_release} field was previously populated by data from the old
autobuild.sh file but is no longer used.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ceph in upstream and Fedora has dropped support for building on host
architectures which are 32-bit.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In accordance with our platform support policy, now that
Fedora 29 is out we no longer support building on Fedora 27.
This allows us to remove a few version checks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Both ceph and gluster have been built on RHEL on all architectures for
some time, there's no need to limit them to x86_64.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
RHEL-7 is the only system where gnutls is too old to support @LIBVIRT
specifier.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In preparation for splitting up the CPU map data file, move it into a
dedicated directory of its own.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most distributions we build RPMs on don't ship a
recent enough version of libiscsi, so we can't enable
the driver unconditionally. Add an explicit dependency
on the runtime package while at it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit 34a6962c41 added a BuildRequires for the
iscsi-direct backend, but we need the headers rather
than the runtime package to be available in order to
link against the library.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit ce3c6ef684.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The distros we support for RPM builds all have %autosetup support so we
can ditch the convoluted code for running git manually and use the RPM
defaults.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It's on RHEL7, saves a bit of typing, and lets us drop the comment
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The jansson and json-glib libraries both export symbols with a json_
name prefix and json_object_iter_next() clashes between them.
Unfortunately json-glib is linked in by GTK, so any app using GTK and
libvirt will get a clash, resulting in SEGV. This also affects the NSS
module provided by libvirt
Instead of directly linking to jansson, use dlopen() with the RTLD_LOCAL
flag which allows us to hide the symbols from the application that loads
libvirt or the NSS module.
Some preprocessor black magic and wrapper functions are used to redirect
calls into the dlopen resolved symbols.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All our supported RHEL and Fedora versions include systemd, so we can
assume it is always present in the spec.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We no longer build on RHEL-6, so can bump min required RHEL to 7
removing many conditions.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.
All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versionshttps://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson
Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.
Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.
Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
RHEL-6/CentOS-6 is no longer supported, let's remove dependency on
libcgroup and code that enables/starts cgconfig service.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1602407
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All drivers now link directly to libvirt.so rather than getting the
symbols from the daemon. Let's explicitly mention this dependency in the
spec file instead of relying on transitive dependency from
libvirt-daemon.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit <41d619e99c2015eab2d56bea874e23ba9f52f829> introduced new RNG
schema files for nwfilter but forgot to update spec file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
SASL authentication is configured server-side, so the sample
configuration file should be shipped along with the daemon
rather than with the libraries.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Extend qemu_conf with user and group for running the tpm-emulator
and add directories to the configuration for the locations of the
log, state, and socket of the tpm-emulator.
Also add these new directories to the QEMU Makefile.inc.am and
the RPM spec file libvirt.spec.in.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At least since Fedora 26 (maybe earlier, but we don't support older
Fedora releases), the "tc" tool is provided by a separate iproute-tc
package.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The nwfilter XMLs in /etc are defined as %ghost in the spec file, which
means rpm will not install them, but it will record its existence and
permissions in the database. During installation the files are copied in
a %post scriptlet from /usr/share/libvirt/nwfilter, but once libvirtd is
restarted, it will rewrite the files to add generated UUIDs.
While RPM recorded 644 mode for the XMLs, libvirt saves them with 600
and thus any future attempt to verify the libvirt-daemon-config-nwfilter
package would fail. We need to tell RPM the ghost files are supposed to
have 600 permissions.
https://bugzilla.redhat.com/show_bug.cgi?id=1559284
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It's only required on el5 which we don't support anymore. Everywhere
else it's not used for anything useful
https://fedoraproject.org/wiki/RPMGroups
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of currently supported distributions need that.
Last one was EL5 which is EOL for a while.
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of currently supported distributions need that.
It was needed last for EL5 which is EOL now
Signed-off-by: Igor Gnatenko <ignatenkobrain@fedoraproject.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The storage file drivers are currently loaded as a side effect of
loading the storage driver. This is a bogus dependancy because the
storage file code has no interaction with the storage drivers, and
even ultimately be running in a completely separate daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The wireshark plugin directory moved again in Fedora 29, and will
move again every time wireshark do a new minor release. Call out
to pkg-config to find the right directory to use in the RPM file
list.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Snce the xen driver was deleted we need to ensure that the old
libvirt-daemon-driver-xen sub-RPM gets removed on upgrade. We
achieve this my making libvirt-daemon-driver-libxl obsolete it.
We don't add a Provides: too, because libvirt-daemon-driver-libxl
is not a functionally identical replacement, since we don't want
to satisfy deps for 3rd party apps that have a Requires on the
libvirt-daemon-driver-xen RPM.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since RPC support moved out of glibc we need to have explicit deps on
the new packages providing this functionality
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Macros in RPMs are expanded before line continuations, so when we write
%systemd_preun foo \
bar
What happens is that it expands to
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
systemctl --no-reload disable --now foo \ > /dev/null 2>&1 || :
fi
bar
which is obviously complete garbage and not what we expected. It is
simply not safe to ever use line continuations in combination with
macros.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While RHEL / CentOS are still using Python 2 for the time being,
Fedora has already switched to Python 3 as the default Python
interpreter a while ago, so on that OS it doesn't make sense to
drag in Python 2 anymore; the same applies to future RHEL versions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fedora requires packages to depend on "python2" RPM, not the unversioned
"python" name. Fortunately even though RHEL-6 ships a "python" RPM, it
has a virtual Provides for the "python2" name, so we don't need to
conditionalize this.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As of 2499d1a095 we don't link against libpolkit anymore, so
we only need the polkit package to be available during build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, for rpm we are building libvirt with
--init-script=systemd or --init-script=redhat. So upstart is
never enabled. And only due to a bug we installed
libvirtd.upstart file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fuse was recently enabled whereever LXC is enabled:
commit 34783a9e6b
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Fri Feb 9 13:42:50 2018 +0100
spec: Enable fuse only if LXC is enabled
Unfortunately the version of Fuse in RHEL-6 is too old for libvirt's
needs, but we still have LXC enabled there.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The postun trigger for libvirt-daemon was defined twice for overlapping
ranges of package verions if systemd support was switched off (which
happens when building on something ancient, such as RHEL-6).
Let's combine the two triggers into the one which is called when
libvirt-daemon < 1.3.0 is uninstalled. As a side effect, virtlockd and
virtlogd might be reloaded twice after an upgrade from libvirt newer
than 1.2.1 and older than 1.3.0 (by postun script from the old libvirt
and postun trigger from the new libvirt).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The oldest Fedora release supported by the spec file is 26. Checking for
anything older makes no sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Building virt-login-shell doesn't really make any sense without LXC and
doing so even breaks "make rpm" since the associated files are installed
but unpackaged (the login-shell sub package already depends on LXC).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enabling fuse without LXC does not make a lot of sense because fuse is
used only by LXC.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit id 'ce7ae55e' added support for the lockd admin socket, but
forgot to add the socket to the make and spec files for installation
purposes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Commit id '85d45ff0' added support for the logd admin socket, but
forgot to add the socket to the make and spec files for installation
purposes.
NB: Includes breaking up the long %systemd_ lists across multiple lines
for ease of reading
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Update the min fedora to 26. Use a macro to record the min versions so that the
later error message is always in sync with the earlier version check. Clarify
the comment that refers to guessing of dist which does not actually happen.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RHEL-6 doesn't have bash-completion package by default, it has to be
installed from EPEL.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The only purpose of this file is to be sourced. After that one
can use completion even for their bash:
# virsh list --<TAB><TAB>
--all --inactive ...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the spec file applies a patch which touches any file in the API XMLs
dependency tree, we need to regenerate the XMLs and consequently
recreate hvsupport.html. The file will contain a time stamp in a comment
which means it will be different every time the package is built. The
commit a54c962286 which added the time stamp also added support for
SOURCE_DATE_EPOCH environment variable. Let's set it to the time stamp
of the spec file itself to make the build reproducible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
When building a package in a build system, such as koji or cbs, logs are
the only thing which can be used to diagnose failures. Make them verbose
since human friendly output of V=0 build doesn't really help when a
build fails.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
When upgrading libvirt packages, there's no strict ordering for the
installation or removal of the individual libvirt sub packages. Thus
libvirt-daemon may be upgraded (and its %postun scriptlet) started
before all sub packages with driver libraries are upgraded. When
libvirt-daemon's %postun scriptlet restarts the daemon old drivers may
still be laying around and the daemon may crash when it tries to use
them.
Let's restart the daemon in %posttrans to make sure libvirtd is
restarted only after all sub packages are at the same version.
https://bugzilla.redhat.com/show_bug.cgi?id=1464300
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Installing dead README symlink only is pretty useless.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Building RPM should only be allowed on a supported platform, but
unpacking the source and applying all patches can be done anywhere.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The HTML pages are currently validated against an XHTML 1.0 DTD.
This makes it impossible to take advantage of features that are
introduced in HTML 5, because they'll fail validation.
There is intentionally no DTD defined for HTML 5, so there's no
alternative to XHTML 1.0 DTD that we could switch to. The only
options are to stick with XHTML 1.0 forever, or drop the DTD
validation, and we pick the latter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New maint release version numbers of just A.B.C format, not the old
A.B.C.D format. Adjust the check that dynamically changes the Source
URL for maint releases
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
A previous commit changed the spec to use librbd1-devel on
RHEL-7, since this replaces ceph-devel from RHEL-6:
commit 6cfc8834c8
Author: Peter Krempa <pkrempa@redhat.com>
Date: Thu Mar 5 11:40:54 2015 +0100
spec: Enable RBD storage driver in RHEL-7
Use correct package names too as they differ.
RHEL-7 inherited this rename from Fedora though, so it should
have also made Fedora use the new names.
This was missed, because Fedora still provides a (deprecated)
back-compat RPM for ceph-devel that just pulls in librbd1-devel
(and others).
Fixing this stops libvirt pulling Java into the build root in
Fedora.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
/etc/libvirt/nwfilter/*.xml files are installed with no UUID, which
means libvirtd will automatically alter all of them once it starts. Thus
RPM verification will always fail on them. Let's use a trick similar to
the default network XML and store nwfilter XMLs in /usr/share. They will
be copied into /etc in %post. Additionally the /etc files are marked as
%ghost so that they are uninstalled if the RPM package is removed.
Note that the %post script overwrites existing files with new ones on
upgrade, which is what has always been happening.
https://bugzilla.redhat.com/show_bug.cgi?id=1431581https://bugzilla.redhat.com/show_bug.cgi?id=1378774
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
RFC 6331 documents a number of serious security weaknesses in
the SASL DIGEST-MD5 mechanism. As such, libvirtd should not
by using it as a default mechanism. GSSAPI is the only other
viable SASL mechanism that can provide secure session encryption
so enable that by defalt as the replacement.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Create a new set of sub-packages containing the new storage driver
modules so that certain heavy-weight backends (gluster, rbd) can be
installed separately only if required.
To keep backward compatibility the 'libvirt-driver-storage' package
will be turned into a virtual package pulling in all the new storage
backend sub-packages. The storage driver module will be moved into
libvirt-driver-storage-core including the filesystem backend which is
mandatory.
This then allows to make libvirt-daemon-driver-qemu depend only on the
core of the storage driver.
All other meta-packages still depend on the full storage driver and thus
pull in all the backends.
If driver modules are enabled turn storage driver backends into
dynamically loadable objects. This will allow greater modularity for
binary distributions, where heavyweight dependencies as rbd and gluster
can be avoided by selecting only a subset of drivers if the rest is not
necessary.
The storage modules are installed into 'LIBDIR/libvirt/storage-backend/'
and users can override the location by using
'LIBVIRT_STORAGE_BACKEND_DIR' environment variable.
rpm based distros will at this point install all the backends when
libvirt-daemon-driver-storage package is installed.
Explicitly enable --with-storage-scsi and disable --without-storage-zfs
and --without-storage-vstorage so that the configure script doesn't
check for them.
Note that --with-storage-dir is enabled by default.
For the namespaces feature to work properly we need to be able
to make a perfect copy of the original /dev, including ACLs.
By adding a BuildRequires on libacl-devel we ensure that ACL
support will be enabled at configure time and made available
to the QEMU driver.
When redoing the website we deleted the libvirtLogo.png file
not remembering that the test driver screenshot API impl
relied on it.
Rather than having the test driver use the logo as a side
effect, give it its own dedicated image to use. This is
installed in /usr/share/libvirt/test-screenshot.png and
is taken from a NeXT Cube running WorldWideWeb[1]. The
very first web browser in existance, running on the
hardware it was originally written on.
[1] https://en.wikipedia.org/wiki/WorldWideWeb
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].
Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:
libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.
This way domains are decoupled from specific shutdown service via intermediate
target.
[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
Commit e8861f6971 changed our spec file to compile and run
tests in parallel. That's a very good step forward, but why
stop there? Let's run *all* make jobs in parallel and really
put those expensive cores to use!
On my laptop, this shaves ~10s off 'make rpm'.
So far, the main code is built in parallel, which makes it pretty
fast. But with a lots of tests we have now I've noticed this part
takes too much time to build. The problem was that tests were
build and run in a single job.
Also, 'make' in the first hunk is useless. The test suite is not
built due to 'make all' because there's no .git in the sources
unpacked from a tar.xz archive. It's 'make check' which triggers
tests build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We only claim support for OSs that are still supported by the
respective vendors, which means anything older than Fedora 23
is out. Reword the comment a bit to highlight the criteria.
With newest gnutls available in Fedora 25/rawhide, it is
possible to have TLS priority fallbacks, so we can finally
use --tls-priority=@LIBVIRT,SYSTEM
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This previous commit
commit cd9fcc8be7
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Wed Jul 27 16:58:32 2016 +0200
libvirt.spec.in: Adapt to newest wireshark plugindir
Adapted the libvirt spec for wireshark >= 2.1.0 but
this ignored the fact that we enable wireshark from
Fedora 21 and 2.1.0 was only added in Fedora 24
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the old days, when wireshark plugin was introduced it was
installed under /usr/lib64/wireshark/plugins/$VERSION/ while with
wireshark-2.1.0 this path has changed just to
/usr/lib64/wireshark/plugins. We should teach our spec file about
this change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit ffc49e579c broke syntax-check:
cppi: libvirt.spec.in: line 622: not properly indented
cppi: libvirt.spec.in: line 624: not properly indented
cppi: libvirt.spec.in: line 640: not properly indented
cppi: libvirt.spec.in: line 642: not properly indented
maint.mk: incorrect preprocessor indentation
cfg.mk:697: recipe for target 'sc_spec_indentation' failed
Indent the new conditionals properly.
The systemd-machined tools libvirt uses were split into a
systemd-container RPM. Without depending on this, libvirt
may silently fallback to the non-systemd cgroup impl which
is not desirable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, we have libvirt-client library which serves as a
collection point for all the libraries and client binaries we
have. Therefore we have couple of silly dependencies, for
instance libvirt-daemon depends on libvirt-client. Only because
the shared library is in the client package.
To solve this, new package libvirt-libs is introduced where all
the libraries are going to live. The client package is then set
to depend on this new package, just like the rest of packages
that suffer the same problem.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
RHEL-6 still needs to use libnl instead of libnl3, so re-add
the spec conditional mistakenly removed in
commit 3694e038fd
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 4 15:43:08 2016 +0100
libvirt.spec.in: drop Fedora < 20 and RHEL < 6
With respect to to the following thread
https://www.redhat.com/archives/libvir-list/2016-June/msg01822.html, until we
introduce a new rpm package '-libs' that would allow us to drop daemon's
dependency on the client package, distribute admin API related stuff within
the client package (since it's the best analogy to the virsh client).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Without that we might get similar messages in the log:
error : virDriverLoadModule:73 : failed to load module
/usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so
/usr/lib64/libvirt/connection-driver/libvirt_driver_qemu.so: undefined
symbol: virStorageFileCreate
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This allows us to produce releases that are roughly a third in
size, have no limitation on path length, and are still readable
by all supported platforms.
In Fedora >= 21, there is a new crypto priority framework
that sets TLS policies globally for all apps. To activate
this with GNUTLS we must request "@SYSTEM" instead of
the traditional "NORMAL" string. The '@' causes gnutls todo
a lookup in its config file for the 'SYSTEM' keyword entry.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The sd_notify method is used to tell systemd when libvirtd
has finished starting up. All it does is send a datagram
containing the string parameter to systemd on a UNIX socket
named in the NOTIFY_SOCKET environment variable. Rather than
pulling in the systemd libraries for this, just code the
notification directly in libvirt as this is a stable ABI
from systemd's POV which explicitly allows independant
implementations:
See "Reimplementable Independently" column in the
"$NOTIFY_SOCKET Daemon Notifications" row:
https://www.freedesktop.org/wiki/Software/systemd/InterfacePortabilityAndStabilityChart/
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1314881
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Fedora now ships edk2 firmware in its official repos, so adapt
the nvram path list to match. Eventually we can remove the nightly
links as well once some integration kinks have been worked out,
and documentation updated.
Move the macro building into the %build target, which lets us
build up a shell variable and make things a bit more readable
https://bugzilla.redhat.com/show_bug.cgi?id=1335395
It was only needed for rpm versions that are much older than our
minimally supported distro
Some more details here: https://fedorahosted.org/fpc/ticket/77
syntax-check complained about broken indentation in libvirt.spec.in which was
broken by commit 3694e038
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We were adding a sheepdog requirement at runtime, but forgetting
to turn it on at build time, so the underlying code was never
built.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The %changelog entries in the RPM are just a poor immitation
of the release notes, which is not what %changelog section
is for. It should be reflecting changes in the RPM packaging,
not changes in the application releases. Further, this bogus
list of changes has to be manually deleted every time we sync
the RPM with Fedora. Remove them, since they serve no useful
purpose.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rather than letting the configure script auto-detect features
we expect, use --with-xxx to explicitly mandate them. This
ensures that we get an error upfront when running configure,
rather than a failure later during build or RPM file packaging
time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Both RHEL and Fedora build with the storage driver and
most of its sub-drivers enabled at all times.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Both RHEL and Fedora build with driver modules enabled by
default, so there is no need for any conditional.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A client only build dates back to RHEL5 where some architectures
did not build the libvirtd daemon, only the clients. Since RHEL5
was dropped this is no longer required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Simplify conditionals to assume Fedora >= 20 or RHEL >= 6
The %prep section will explicitly check the version and
refuse to run if insufficient.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previous commit moved some lists out of the -devel package
and into the -docs package
commit feffcc03a0
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Apr 13 10:37:42 2016 -0400
spec: Only pull in API docs with -devel package
What was not realized is that the rule 'libvirt-docs/*'
and ' docs/*.html docs/html docs/*.gif' actually point
to the exact same content. ie, we had previously included
the website HTML in *both* the -docs and -devel packages.
So this change ended up listing the files twice, which
caused RPM to print a load of warnings:
warning: File listed twice: /usr/share/doc/libvirt-docs/html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/32favicon.png
warning: File listed twice: /usr/share/doc/libvirt-docs/html/404.html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/acl.html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/aclpolkit.html
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If libvirt-daemon-config-network is installed while libvirtd is already
running, the daemon doesn't notice the network. Users then have to
manually restart libvirtd (or reboot) to pick up the network.
Instead let's trigger a daemon restart when the package is first installed.
Then the default network is available immediately if libvirtd was already
running.
https://bugzilla.redhat.com/show_bug.cgi?id=867546
This reverts commit 1e9808d3a1.
We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.
We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]
Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136
Move some API specific documentation out of -docs package and into
-devel, and some end user docs out of -devel and into -docs, then
drop the -devel dep on -docs. This is more in line with the suggested
Fedora guidelines.
https://bugzilla.redhat.com/show_bug.cgi?id=1310155
Using one Makefile per example subdirectory essentially serializes 'make'
calls. Convert to one example/Makefile that builds and distributes
all the subdir files. This reduces example/ rebuild time from about 5.8
seconds to 1.5 seconds on my machine.
One slight difference is that we no longer ship Makefile.am with the
examples in the rpm. This was virtually useless anyways since the Makefile
was very specific to libvirt infrastructure, so wasn't generically
reusable anyways.
Tested with 'make distcheck' and 'make rpm'
When installing the libvirt-daemon RPM, we have a %post rule to
enable the libvirtd.service, virtlockd.socket and virtlogd.socket
files. This is only done, however, when the RPM is first installed,
not when upgrading RPMs. So virtlogd will not get activated on
upgrading, which is a problem as libvirt qemu driver will expect
it to be available by default.
This adds a trigger that is run when uninstalling libvirt-daemon
older than 1.3.0 that will enable & start virtlogd.socket if
libvirtd is enabled and/or started. Using the trigger rather
than %post ensures that it only runs once, allowing admins to
disable it explicitly thereafter without future upgrades
re-enabling it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 48cd3dfa66 introduced configuration
file for libvirt-admin but forgot to distribute it. Also the change
made to libvirt.conf in commit dbecb87f94
should've been removed thanks to introduction of separate config file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virt-admin binary and its man page should not yet be distributed,
but we need libvirt-common.h. RPM build fails without specifying these.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There has been a report on the list [1] that we are not
installing the wireshark dissector into the correct plugin
directory. And in fact we are not. The problem is, the plugin
directory path is constructed at compile time. However, it's
dependent on the wireshark version, e.g.
/usr/lib/wireshark/plugins/1.12.6
This is rather unfortunate, because if libvirt RPMs were built
with one version, but installed on a system with newer one, the
plugins are not really loaded. This problem lead fedora packagers
to unify plugin path to:
/usr/lib/wireshark/plugins/
Cool! But this was enabled just in wireshark-1.12.6-4. Therefore,
we must require at least that version.
And while at it, on some distributions, the wireshark.pc file
already has a variable that defines where plugin dir is. Use that
if possible.
1: https://www.redhat.com/archives/libvirt-users/2015-October/msg00063.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I'm hitting this little annoyance in fedora's package repo:
$ fedpkg prep
Downloading libvirt-1.2.20.tar.gz
...
+ /usr/bin/gzip -dc /home/crobinso/src/fedora/libvirt/libvirt-1.2.20.tar.gz
$ git clean -xdf
Removing libvirt-1.2.20.tar.gz
Skipping repository libvirt-1.2.20/
We git-ify the libvirt directory as part of applying patches in the spec
file, but 'git clean' will ignore subfolders that appear to be standalone
git repos.
Let's just delete the .git directory after we're done with it.
In previous change:
commit 29b5167417
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Tue Aug 4 14:05:52 2015 +0200
examples: Add example polkit ACL rules
The polkit examples were accidentally added to the spec inside
a %if %{with_network} conditional.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
$ rpmbuild -ba libvirt.spec
warning: Macro expanded in comment on line 5: # If neither fedora nor rhel was defined, try to guess them from %{dist}
warning: Macro %enable_autotools defined but not used within scope
warning: Macro %client_only defined but not used within scope
...
Commit f1f68ca334 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.
The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.
Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit e755186c5c added the rename example, but forgot to build some
essential files in there as well as add it to the spec file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Creating ACL rules is not exactly easy and existing examples are pretty
simple. This patch adds a somewhat complex example which defines several
roles. Admins can do everything, operators can do basic operations
on any domain and several groups of users who act as operators but only
on a limited set of domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of fedora polkit-0.113-2, polkit-devel only pulls in polkit-libs, not
full polkit, but we need the latter for pkcheck otherwise our configure
test fails.
Don't listen on the admin socket in the daemon and comment out the
admin devel files out of specfile.
Library is still being compiled and installed in order to link easily
without any disturbing modifications to the daemon code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Its only file must be included in the daemon package anyway, since the
daemon is linked with the admin library and so then it's just an empty
package until we have virt-admin binary which we can decide later on
whether to just move it to clients or create a new package for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While Martin introduced the binary (and its manpage) in commit
4e7ccf8713 it was pushed by mistake. Therefore it was reverted in
220393bfb0. The problem is, the original commit was not quite right
as the binary was added into the spec file in a different commit:
55e0c840af. So as long as the binary does not exist, we must remove it
from the spec file too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
No online docs are build from it since it doesn't really fit into our
document structure and new page will need to be created for it, but this
is at least a heads-up commit for easier parsing in order to build some
documentation (or python bindings) later on.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Initial scratch of the admin library. It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.
There's pkg-config file added and spec-file adjusted as well.
Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it. Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 198cc1d3 introduced libxl-lockd and libxl-sanlock config
files but forgot to add them to the spec file. Follow-up commit
62b18d98 added the files to daemon-driver-libxl, but missed adding
them to the daemon package when configuring libvirt
--without-driver-modules. In addition, commit 62b18d98 added
libxl-sanlock to daemon-driver-libxl, but it should be included
in lock-sanlock when libvirt is configured --with-sanlock.
Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.
Let's finally add official support for this.
Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install
https://bugzilla.redhat.com/show_bug.cgi?id=957300
Recent commit 198cc1d3 introduced integration of lockd and sanlock into
libxl, but forget to update libvirt.spec.in to also list new files
distributed via package.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos
Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 55ea7be7 removed separated modules for vbox_network and
vbox_storage drivers but forget to update libvirt.spec.in file. This
patch will fix rpm build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since we switched to using GIT to apply patches in the RPM spec,
we automagically also turned on -Werror, since the .git directory
now exists. We don't want this on in Fedora, since changing
header files often lead to new warnings being issued. Explicitly
turn off -Werror for non-RHEL platforms, instead of relying on
the defaults
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Partially reverts commit 5754dbd.
The code in the specfile adds a MAC address to every <bridge>,
even for <forward mode='bridge'> for which we don't support
changing MAC addresses.
Remove it completely. For new networks, we have been adding
MAC addresses on definition/creation since the commit mentioned above.
For existing networks (pre-0.9.0), the MAC is added by this commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1156367
Since libvirt.h was split into multiple files and similarly
docs/libvirt-libvirt.html, docs/hvsupport.html have bad hyperlinks. The
same happens for all the html.in files that used <code class='docref'>
tag, because page.xsl has no idea where to point the link that's found.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With this change, any patch declared in libvirt.spec with Patch[0-9]* is
automatically applied in %prep. Unlike with the standard %patch[0-9]*,
patches are applied with "git am" to avoid some unexpected results.
However, as a result of this, all patches must be in the right format
for "git am" to be able to apply them; they should ideally be generated
from git using "git format-patch".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Create a new libvirt-host.h file to hold the public
API definitions for the virConnect type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-event.h file to hold the public
API definitions for the virEvent type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-storage.h file to hold the public
API definitions for the virStorage/Vol type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-stream.h file to hold the public
API definitions for the virStream type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Note the definition of virStreamPtr is not moved, since that
must be declared early for all other libvirt APIs to be able
to reference it.
Create a new libvirt-secret.h file to hold the public
API definitions for the virSecret type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nodedev.h file to hold the public
API definitions for the virNodeDevice type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nwfilter.h file to hold the public
API definitions for the virNWFilter type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-interface.h file to hold the public
API definitions for the virInterface type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-network.h file to hold the public
API definitions for the virNetwork type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain-snapshot.h file to hold the public
API definitions for the virDomainSnapshot type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
This is a folloup to commit 5f719596, which checks for a route
conflicting with the standard libvirt default network subnet
(192.168.122.0/24). It turns out that $() strips the trailing newline
from the output of "ip route show", so there would be no match if the
route we were looking for was the final line of output. This can be
solved by adding ${nl} to the end of the output (just as we were
already adding it at the beginning of the output).
Sometimes libvirt is installed on a host that is already using the
network 192.168.122.0/24. If the libvirt-daemon-config-network package
is installed, this creates a conflict, since that package has been
hard-coded to create a virtual network that also uses
192.168.122.0/24. In the past libvirt has attempted to warn of /
remediate this situation by checking for conflicting routes when the
network is started, but it turns out that isn't always useful (for
example in the case that the *other* interface/network creating the
conflict hasn't yet been started at the time libvirtd start its own
networks).
This patch attempts to catch the problem earlier - at install
time. During the %post install script for
libvirt-daemon-config-network, we use a case statement to look through
the output of "ip route show" for a route that exactly matches
192.168.122.0/24, and if found we search for a similar route that
*doesn't* match (e.g. 192.168.124.0/24) (note that the search starts
with "124" instead of 123 because of reports of people already
modifying their L1 host's network to 192.168.123.0/24 in an attempt to
solve exactly the problem we are also trying to solve). When we find
an available route, we just replace all occurrences of "122" in the
default.xml that is being created with the newly found 192.168
subnet. This could obviously be made more complicated - examine the
template defaul.xml to automatically determine the existing network
address and mask rather than hard coding it in the specfile, etc, but
this scripting is simpler and gets the job done as long as we continue
to use 192.168.122.0/24 in the template. (If anyone with mad bash
skillz wants to suggest something to do that, by all means please do).
This is intended to at least "further reduce" occurrence of the
problems detailed in:
https://bugzilla.redhat.com/show_bug.cgi?id=811967
In my previous patch (37d8c75fad) I've tried to fix permissions
for nvram store path. The aim was to give the nvram directory
execute permission so that domain running under other users
than qemu:qemu can access their nvram file. However, my fix
was incomplete as the path belongs to libvirt-driver-qemu
package too and I've fixed it only for the libvirt-daemon
package.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed two problem with the automatically created NVRAM varstore
file. The first, even though I run qemu as root:root for some reason I
get Permission denied when trying to open the _VARS.fd file. The
problem is, the upper directory misses execute permissions, which in
combination with us dropping some capabilities result in EPERM.
The next thing is, that if I switch SELinux to enforcing mode, I get
another EPERM because the vars file is not labeled correctly. It is
passed to qemu as disk and hence should be labelled as disk. QEMU may
write to it eventually, so this is different to kernel or initrd.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553f3 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
RHEL 5 is based on libvirt 0.8.2, as was Fedora 13. RHEL 5 also
happens to be the oldest box that we actively support with a
buildbot, so it is time to clean up some crufty conditionals in
the spec file that no longer are necessary for modern Fedora.
Although it is probably okay to make further simplifications to
a newer minimum Fedora version, that can be done as a later patch.
This patch just focuses on cleaning any comparison of %{?fedora}
that will always be true or false once we assume a minimum of F13.
* libvirt.spec.in: Make with_audit default to on. Move other
conditionals to a single RHEL-5 block. Simplify any fedora
comparison older than 13. Document our assumptions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html
So need to enhance configure script to handle this negative case.
Reported-by: Hongbin Lu <hongbin@savinetwork.ca>
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?
It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.
Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Decisions whether qemu driver and libvirt-daemon-{qemu,kvm} packages
should be built on various OS/arch combinations were scattered around
the spec file. Let's make it easier to see where qemu driver is going to
be built.
Commit 20e01504 broke 'make rpm':
error: line 540: Unknown tag: %elif 020 >= 12 || 0 >= 6
Apparently, even though shell has elif so that you can do a chain
of conditionals, the rpm spec file does not, and you have to nest
things instead.
* libvirt.spec.in: Convert %elif to proper nested %if.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use secured polkit on distros which provide it. However, RHEL-6 will
still allow for older polkit-0.93 rather than forcing polkit-0.96-5
which is not available in all RHEL-6 releases.
This new module holds and formats capabilities for emulator. If you
are about to create a new domain, you may want to know what is the
host or hypervisor capable of. To make sure we don't regress on the
XML, the formatting is not something left for each driver to
implement, rather there's general format function.
The domain capabilities is a lockable object (even though the locking
is not necessary yet) which uses reference counter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce helper program to catch events from dnsmasq and maintain a custom
lease file per network. It supports dhcpv4 and dhcpv6. The file is saved as
"<interface-name>.status".
Each lease contains the following info:
<expiry-time (epoch time)> <mac> <iaid> <ip-address> <hostname> <clientid>
Example of custom leases file content:
[
{
"iaid": "1221229",
"ip-address": "2001:db8:ca2:2:1::95",
"mac-address": "52:54:00:12:a2:6d",
"hostname": "Fedora20",
"client-id": "00:04:1a:c1:d9:6b:5a:0a:e2:bc:f8:4b:1e:37:2e:38:22:55",
"expiry-time": 1393244216
},
{
"ip-address": "192.168.150.208",
"mac-address": "52:54:00:11:56:b3",
"hostname": "Wani-PC",
"client-id": "01:52:54:00:11:56:b3",
"expiry-time": 1393244248
}
]
src/Makefile.am:
* Add options to compile the helper program
src/network/bridge_driver.c:
* Introduce networkDnsmasqLeaseFileNameCustom()
* Invoke helper program along with dnsmasq
* Delete the .status file when corresponding n/w is destroyed.
src/network/leaseshelper.c
* Helper program to create the custom lease file
Michal Privoznik