mirror of https://gitee.com/openkylin/libvirt.git
288 lines
9.5 KiB
ReStructuredText
288 lines
9.5 KiB
ReStructuredText
========================================
|
|
PCI addresses in domain XML and guest OS
|
|
========================================
|
|
|
|
.. contents::
|
|
|
|
Looking at the configuration for a guest, it would be reasonable
|
|
to expect that each PCI device would show up in the guest OS with
|
|
a PCI address that matches the one present in the corresponding
|
|
``<address>`` element of the domain XML, but that's not guaranteed
|
|
to happen and will in fact not be the case in all but the simplest
|
|
scenarios.
|
|
|
|
|
|
Simple cases
|
|
============
|
|
|
|
When the PCI topology of the VM is very simple, the PCI addresses
|
|
will usually match.
|
|
|
|
For example, the domain XML snippet
|
|
|
|
::
|
|
|
|
<controller type='pci' index='0' model='pcie-root'/>
|
|
<controller type='pci' index='1' model='pcie-root-port'>
|
|
<model name='pcie-root-port'/>
|
|
<target chassis='1' port='0x8'/>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
|
|
</controller>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<model type='virtio'/>
|
|
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
|
|
</interface>
|
|
|
|
will result in the PCI topology
|
|
|
|
::
|
|
|
|
0000:00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
|
|
0000:00:01.0 PCI bridge: Red Hat, Inc. QEMU PCIe Root port
|
|
0000:01:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01)
|
|
|
|
showing up in the guest OS.
|
|
|
|
The PCI address of the ``virtio-net`` adapter, ``0000:01:00.0``, is
|
|
the same in both cases, so there's no confusion.
|
|
|
|
|
|
More complex cases
|
|
==================
|
|
|
|
In more complex cases, the PCI address visible in the domain XML will
|
|
correlate to the one seen by the guest OS in a less obvious way.
|
|
|
|
pcie-expander-bus
|
|
-----------------
|
|
|
|
This fairly uncommon device, which can be used with ``x86_64/q35``
|
|
guests, will help illustrate one such scenario.
|
|
|
|
For example, the domain XML snippet
|
|
|
|
::
|
|
|
|
<controller type='pci' index='0' model='pcie-root'/>
|
|
<controller type='pci' index='1' model='pcie-expander-bus'>
|
|
<model name='pxb-pcie'/>
|
|
<target busNr='254'/>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
|
|
</controller>
|
|
<controller type='pci' index='2' model='pcie-root-port'>
|
|
<model name='pcie-root-port'/>
|
|
<target chassis='2' port='0x0'/>
|
|
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
|
|
</controller>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<model type='virtio'/>
|
|
<address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
|
|
</interface>
|
|
|
|
will result in the PCI topology
|
|
|
|
::
|
|
|
|
0000:00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
|
|
0000:00:01.0 Host bridge: Red Hat, Inc. QEMU PCIe Expander bridge
|
|
0000:fe:00.0 PCI bridge: Red Hat, Inc. QEMU PCIe Root port
|
|
0000:ff:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01)
|
|
|
|
showing up in the guest OS.
|
|
|
|
This time the addresses don't match: this is because the ``busNr``
|
|
property for the ``pcie-expander-bus`` controller causes it to show
|
|
up as bus 254 (``0xfe`` in hexadecimal) instead of bus 1 as one might
|
|
expect based on its ``index`` property.
|
|
|
|
How can the domain XML shown above work at all, then? Surely the
|
|
``pcie-root-port`` controller and the ``virtio-net`` adapter should
|
|
use ``bus=0xfe`` and ``bus=0xff`` respectively for the configuration
|
|
to be accepted by libvirt?
|
|
|
|
As it turns out, that's not the case. The reason for this is that
|
|
QEMU, and consequently libvirt, uses the ``bus`` property of a
|
|
device's PCI address only to match it with the PCI controller that
|
|
has the same ``index`` property, and not to set the actual PCI
|
|
address, which is decided by the guest OS.
|
|
|
|
So, by looking at the XML snippet above, we can see that the
|
|
``virtio-net`` adapter plugs into the ``pcie-root-port`` controller,
|
|
which plugs into the ``pcie-expander-bus`` controller, which plugs
|
|
into ``pcie-root``: the guest OS sees the same topology, but assigns
|
|
different PCI addresses to some of its component.
|
|
|
|
The takeaway is that the *relationship* between controllers are the
|
|
very same whether you look at the domain XML or at the guest OS, but
|
|
the *actual PCI addresses* are not guaranteed to match and in fact,
|
|
except for the very simplest cases, they usually will not.
|
|
|
|
spapr-pci-host-bridge
|
|
---------------------
|
|
|
|
This device, which is unique to ``ppc64/pseries`` guests, will help
|
|
illustrate another scenario.
|
|
|
|
For example, the domain XML snippet
|
|
|
|
::
|
|
|
|
<controller type='pci' index='0' model='pci-root'>
|
|
<model name='spapr-pci-host-bridge'/>
|
|
<target index='0'/>
|
|
</controller>
|
|
<controller type='pci' index='1' model='pci-root'>
|
|
<model name='spapr-pci-host-bridge'/>
|
|
<target index='1'/>
|
|
</controller>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<model type='virtio'/>
|
|
<address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/>
|
|
</interface>
|
|
|
|
will result in the PCI topology
|
|
|
|
::
|
|
|
|
0001:00:01.0 Ethernet controller: Red Hat, Inc. Virtio network device
|
|
|
|
showing up in the guest OS. Note that the two
|
|
``spapr-pci-host-bridge`` controllers are not listed.
|
|
|
|
This time, in addition to the bus not matching just like in the
|
|
previous example, the interesting part is that the domain doesn't
|
|
match either: this is because each ``spapr-pci-host-bridge``
|
|
controller creates a separate PCI domain.
|
|
|
|
Once again, while the PCI addresses seen in the domain XML and those
|
|
seen by the guest OS do not match, the relationships between the
|
|
various devices are preserved.
|
|
|
|
zPCI addresses
|
|
--------------
|
|
|
|
For s390x machines, PCI addresses are handled yet differently. No
|
|
topology information is relayed in the PCI addresses; instead, the
|
|
``fid`` and ``uid`` elements of the ``zpci`` device convey information.
|
|
In the simplest case, the following XML snippet
|
|
|
|
::
|
|
|
|
<controller type='pci' index='0' model='pci-root'/>
|
|
<controller type='pci' index='1' model='pci-bridge'>
|
|
<model name='pci-bridge'/>
|
|
<target chassisNr='1'/>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'>
|
|
<zpci uid='0x0001' fid='0x00000000'/>
|
|
</address>
|
|
</controller>
|
|
<interface type='bridge'>
|
|
<source bridge='virbr0'/>
|
|
<model type='virtio'/>
|
|
<address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'>
|
|
<zpci uid='0x0007' fid='0x00000003'/>
|
|
</address>
|
|
</interface>
|
|
|
|
will result in the following in a Linux guest:
|
|
|
|
::
|
|
|
|
0007:00:00.0 Ethernet controller: Red Hat, Inc. Virtio network device
|
|
|
|
Note that the PCI bridge is not visible in the guest; s390x always has a flat
|
|
topology. The PCI address in the guest is generated from the information
|
|
provided via the ``zpci`` element: more specifically, ``uid`` is used as the
|
|
PCI domain. ``fid`` doesn't appear in the PCI address itself, but it will be
|
|
used in sysfs (``/sys/bus/pci/slots/$fid/...``).
|
|
|
|
Any changes in the PCI address are not visible in the guest; replacing the PCI
|
|
address for the ``virtio-net`` device with
|
|
|
|
::
|
|
|
|
<address type='pci' domain='0x0000' bus='0x01' slot='0x06' function='0x4'>
|
|
|
|
will result in the exactly same view in the guest, as the ``fid`` and ``uid``
|
|
values in the ``zpci`` element remain unchanged.
|
|
|
|
|
|
Device assignment
|
|
=================
|
|
|
|
When using VFIO to assign host devices to a guest, an additional
|
|
caveat to keep in mind that the guest OS will base its decisions upon
|
|
the *target address* (guest side) rather than the *source address*
|
|
(host side).
|
|
|
|
For example, the domain XML snippet
|
|
|
|
::
|
|
|
|
<hostdev mode='subsystem' type='pci' managed='yes'>
|
|
<driver name='vfio'/>
|
|
<source>
|
|
<address domain='0x0001' bus='0x08' slot='0x00' function='0x0'/>
|
|
</source>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
|
|
</hostdev>
|
|
|
|
will result in the device showing up as ``0000:00:01.0`` in the
|
|
guest OS rather than as ``0001:08:00.1``, which is the address of the
|
|
device on the host.
|
|
|
|
Of course, all the rules and behaviors described above still apply.
|
|
|
|
|
|
Reserved addresses
|
|
==================
|
|
|
|
Due to some historical reasons hypervisors might expect some PCI
|
|
devices to appear at certain addresses instead of 'random' ones.
|
|
For QEMU this is machine type and guest architecture dependant.
|
|
But to give you at least a gist here is list of reserved PCI
|
|
addresses:
|
|
|
|
For the x86_64 architecture's ``I440FX``-based machine types the following
|
|
devices are hard coded into QEMU and can't be moved or eliminated:
|
|
|
|
============ ======================
|
|
0000:00:00.0 Host bridge
|
|
0000:00:01.0 ISA bridge
|
|
0000:00:01.1 primary IDE controller
|
|
0000:00:01.2 PIIX3 USB controller
|
|
0000:00:01.3 ACPI (power management) and SMBus controller
|
|
============ ======================
|
|
|
|
The following addresses will be used as default ones for the corresponding
|
|
devices (if the address is free or a different address wasn't provided for the
|
|
device). It is okay to use this address for any other device.
|
|
|
|
============ ==================
|
|
0000:00:02.0 primary video card
|
|
============ ==================
|
|
|
|
|
|
For the x86_64 architecture's ``Q35``-based machine types the following
|
|
devices are hard coded into QEMU and can't be moved or eliminated:
|
|
|
|
============ =======================
|
|
0000:00:00.0 Host bridge
|
|
0000:00:1f.2 primary SATA controller
|
|
0000:00:1f.0 ISA bridge
|
|
0000:00:1f.3 SMBus
|
|
============ =======================
|
|
|
|
The following addresses will be used as default ones for the corresponding
|
|
devices (if the address is free or a different address wasn't provided for the
|
|
device) because that's how real ``Q35`` would do it:
|
|
|
|
============ ===============
|
|
0000:00:1a.0 USB2 controller
|
|
0000:00:1b.0 ICH9 sound chip
|
|
0000:00:1d.0 USB2 controller
|
|
============ ===============
|