mirror of https://gitee.com/openkylin/libvirt.git
1145 lines
54 KiB
ReStructuredText
1145 lines
54 KiB
ReStructuredText
.. role:: since
|
|
|
|
==================
|
|
Network XML format
|
|
==================
|
|
|
|
.. contents::
|
|
|
|
This page provides an introduction to the network XML format. For background
|
|
information on the concepts referred to here, consult the `relevant wiki
|
|
page <https://wiki.libvirt.org/page/Networking>`__.
|
|
|
|
Element and attribute overview
|
|
------------------------------
|
|
|
|
The root element required for all virtual networks is named ``network`` and has
|
|
no configurable attributes (although :since:`since 0.10.0` there is one optional
|
|
read-only attribute - when examining the live configuration of a network, the
|
|
attribute ``connections``, if present, specifies the number of guest interfaces
|
|
currently connected via this network). The network XML format is available
|
|
:since:`since 0.3.0`
|
|
|
|
General metadata
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
The first elements provide basic metadata about the virtual network.
|
|
|
|
::
|
|
|
|
<network ipv6='yes' trustGuestRxFilters='no'>
|
|
<name>default</name>
|
|
<uuid>3e3fce45-4f53-4fa7-bb32-11f34168b82b</uuid>
|
|
<metadata>
|
|
<app1:foo xmlns:app1="http://app1.org/app1/">..</app1:foo>
|
|
<app2:bar xmlns:app2="http://app1.org/app2/">..</app2:bar>
|
|
</metadata>
|
|
...
|
|
|
|
``name``
|
|
The content of the ``name`` element provides a short name for the virtual
|
|
network. This name should consist only of alphanumeric characters and is
|
|
required to be unique within the scope of a single host. It is used to form
|
|
the filename for storing the persistent configuration file. :since:`Since
|
|
0.3.0`
|
|
``uuid``
|
|
The content of the ``uuid`` element provides a globally unique identifier for
|
|
the virtual network. The format must be RFC 4122 compliant, eg
|
|
``3e3fce45-4f53-4fa7-bb32-11f34168b82b``. If omitted when defining/creating a
|
|
new network, a random UUID is generated. :since:`Since 0.3.0`
|
|
The ``metadata`` node can be used by applications to store custom metadata in
|
|
the form of XML nodes/trees. Applications must use custom namespaces on their
|
|
XML nodes/trees, with only one top-level element per namespace (if the
|
|
application needs structure, they should have sub-elements to their namespace
|
|
element). :since:`Since 2.1.0`
|
|
``ipv6``
|
|
When set to ``yes``, the optional parameter ``ipv6`` enables a network
|
|
definition with no IPv6 gateway addresses specified to have guest-to-guest
|
|
communications. For further information, see the example below for the
|
|
example with no gateway addresses. :since:`Since 1.0.1`
|
|
``trustGuestRxFilters``
|
|
The optional parameter ``trustGuestRxFilters`` can be used to set that
|
|
attribute of the same name for each domain interface connected to this
|
|
network ( :since:`since 1.2.10` ). See the `Network
|
|
interfaces <formatdomain.html#network-interfaces>`__ section of the domain XML
|
|
documentation for more details. Note that an explicit setting of this
|
|
attribute in a portgroup or the individual domain interface will override the
|
|
setting in the network.
|
|
|
|
Connectivity
|
|
~~~~~~~~~~~~
|
|
|
|
The next set of elements control how a virtual network is provided connectivity
|
|
to the physical LAN (if at all).
|
|
|
|
::
|
|
|
|
...
|
|
<bridge name="virbr0" stp="on" delay="5" macTableManager="libvirt"/>
|
|
<mtu size="9000"/>
|
|
<domain name="example.com" localOnly="no"/>
|
|
<forward mode="nat" dev="eth0"/>
|
|
...
|
|
|
|
``bridge``
|
|
The ``name`` attribute on the ``bridge`` element defines the name of a bridge
|
|
device which will be used to construct the virtual network. The virtual
|
|
machines will be connected to this bridge device allowing them to talk to
|
|
each other. The bridge device may also be connected to the LAN. When defining
|
|
a new network with a ``<forward>`` mode of "nat", "route", or "open" (or an
|
|
isolated network with no ``<forward>`` element), libvirt will automatically
|
|
generate a unique name for the bridge device if none is given, and this name
|
|
will be permanently stored in the network configuration so that that the same
|
|
name will be used every time the network is started. For these types of
|
|
networks (nat, route, open, and isolated), a bridge name beginning with the
|
|
prefix "virbr" is recommended (and that is what is auto-generated), but not
|
|
enforced. Attribute ``stp`` specifies if Spanning Tree Protocol is 'on' or
|
|
'off' (default is 'on'). Attribute ``delay`` sets the bridge's forward delay
|
|
value in seconds (default is 0). :since:`Since 0.3.0`
|
|
|
|
The ``macTableManager`` attribute of the bridge element is used to tell
|
|
libvirt how the bridge's MAC address table (used to determine the correct
|
|
egress port for packets based on destination MAC address) will be managed. In
|
|
the default ``kernel`` setting, the kernel automatically adds and removes
|
|
entries, typically using learning, flooding, and promiscuous mode on the
|
|
bridge's ports in order to determine the proper egress port for packets. When
|
|
``macTableManager`` is set to ``libvirt``, libvirt disables kernel management
|
|
of the MAC table (in the case of the Linux host bridge, this means enabling
|
|
vlan_filtering on the bridge, and disabling learning and unicast_filter for
|
|
all bridge ports), and explicitly adds/removes entries to the table according
|
|
to the MAC addresses in the domain interface configurations. Allowing libvirt
|
|
to manage the MAC table can improve performance - with a Linux host bridge,
|
|
for example, turning off learning and unicast_flood on ports has its own
|
|
performance advantage, and can also lead to an additional boost by permitting
|
|
the kernel to automatically turn off promiscuous mode on some ports of the
|
|
bridge (in particular, the port attaching the bridge to the physical
|
|
network). However, it can also cause some networking setups to stop working
|
|
(e.g. vlan tagging, multicast, guest-initiated changes to MAC address) and is
|
|
not supported by older kernels. :since:`Since 1.2.11, requires kernel 3.17 or
|
|
newer`
|
|
|
|
The optional ``zone`` attribute of the ``bridge`` element is used to specify
|
|
the `firewalld <https://firewalld.org>`__ zone for the bridge of a network
|
|
with ``forward`` mode of "nat", "route", "open", or one with no ``forward``
|
|
specified. By default, the bridges of all virtual networks with these forward
|
|
modes are placed in the firewalld zone named "libvirt", which permits
|
|
incoming DNS, DHCP, TFTP, and SSH to the host from guests on the network.
|
|
This behavior can be changed either by modifying the libvirt zone (using
|
|
firewalld management tools), or by placing the network in a different zone
|
|
(which will also be managed using firewalld tools). :since:`Since 5.1.0`
|
|
|
|
``mtu``
|
|
The ``size`` attribute of the ``mtu>`` element specifies the Maximum
|
|
Transmission Unit (MTU) for the network. :since:`Since 3.1.0` . In the case
|
|
of a libvirt-managed network (one with forward mode of ``nat``, ``route``,
|
|
``open``, or no ``forward`` element (i.e. an isolated network), this will be
|
|
the MTU assigned to the bridge device when libvirt creates it, and thereafter
|
|
also assigned to all tap devices created to connect guest interfaces. Network
|
|
types not specifically mentioned here don't support having an MTU set in the
|
|
libvirt network config. If mtu size is unspecified, the default setting for
|
|
the type of device being used is assumed (usually 1500).
|
|
``domain``
|
|
The ``name`` attribute on the ``domain`` element defines the DNS domain of
|
|
the DHCP server. This element is optional, and is only used for those
|
|
networks with a ``<forward>`` mode of "nat" or "route" (or an isolated
|
|
network with no ``<forward>`` element). :since:`Since 0.4.5`
|
|
|
|
If the optional ``localOnly`` attribute on the ``domain`` element is "yes",
|
|
then DNS requests under this domain will only be resolved by the virtual
|
|
network's own DNS server - they will not be forwarded to the host's upstream
|
|
DNS server. If ``localOnly`` is "no", and by default, unresolved requests
|
|
**will** be forwarded. :since:`Since 1.2.12`
|
|
|
|
``forward``
|
|
Inclusion of the ``forward`` element indicates that the virtual network is to
|
|
be connected to the physical LAN. :since:`Since 0.3.0.` The ``mode``
|
|
attribute determines the method of forwarding. If there is no ``forward``
|
|
element, the network will be isolated from any other network (unless a guest
|
|
connected to that network is acting as a router, of course). The following
|
|
are valid settings for ``mode`` (if there is a ``forward`` element but mode
|
|
is not specified, ``mode='nat'`` is assumed):
|
|
|
|
``nat``
|
|
All traffic between guests connected to this network and the physical
|
|
network will be forwarded to the physical network via the host's IP
|
|
routing stack, after the guest's IP address is translated to appear as the
|
|
host machine's public IP address (a.k.a. Network Address Translation, or
|
|
"NAT"). This allows multiple guests, all having access to the physical
|
|
network, on a host that is only allowed a single public IP address. If a
|
|
network has any IPv6 addresses defined, the IPv6 traffic will be forwarded
|
|
using plain routing, since IPv6 has no concept of NAT. Firewall rules will
|
|
allow outbound connections to any other network device whether ethernet,
|
|
wireless, dialup, or VPN. If the ``dev`` attribute is set, the firewall
|
|
rules will restrict forwarding to the named device only. Inbound
|
|
connections from other networks are all prohibited; all connections
|
|
between guests on the same network, and to/from the host to the guests,
|
|
are unrestricted and not NATed. :since:`Since 0.4.2`
|
|
|
|
:since:`Since 1.0.3` it is possible to specify a public IPv4 address and
|
|
port range to be used for the NAT by using the ``<nat>`` subelement. Note
|
|
that all addresses from the range are used, not just those that are in use
|
|
on the host. The address range is set with the ``<address>`` subelements
|
|
and ``start`` and ``stop`` attributes:
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='nat'>
|
|
<nat>
|
|
<address start='1.2.3.4' end='1.2.3.10'/>
|
|
</nat>
|
|
</forward>
|
|
...
|
|
|
|
A single IPv4 address can be set by setting ``start`` and ``end``
|
|
attributes to the same value.
|
|
|
|
The port range to be used for the ``<nat>`` can be set via the subelement
|
|
``<port>``:
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='nat'>
|
|
<nat>
|
|
<port start='500' end='1000'/>
|
|
</nat>
|
|
</forward>
|
|
...
|
|
|
|
:since:`Since 6.5.0` it is possible to enable NAT with IPv6 networking. As
|
|
noted above, IPv6 has historically done plain forwarding and thus to avoid
|
|
breaking historical compatibility, IPv6 NAT must be explicitly requested.
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='nat'>
|
|
<nat ipv6='yes'/>
|
|
</forward>
|
|
...
|
|
|
|
``route``
|
|
Guest network traffic will be forwarded to the physical network via the
|
|
host's IP routing stack, but without having NAT applied. Again, if the
|
|
``dev`` attribute is set, firewall rules will restrict forwarding to the
|
|
named device only. This presumes that the local LAN router has suitable
|
|
routing table entries to return traffic to this host. All incoming and
|
|
outgoing sessions to guest on these networks are unrestricted. (To
|
|
restrict incoming traffic to a guest on a routed network, you can
|
|
configure `nwfilter rules <formatnwfilter.html>`__ on the guest's
|
|
interfaces.) :since:`Since 0.4.2`
|
|
``open``
|
|
As with mode='route', guest network traffic will be forwarded to the
|
|
physical network via the host's IP routing stack, but there will be no
|
|
firewall rules added to either enable or prevent any of this traffic. When
|
|
forward='open' is set, the ``dev`` attribute cannot be set (because the
|
|
forward dev is enforced with firewall rules, and the purpose of
|
|
forward='open' is to have a forwarding mode where libvirt doesn't add any
|
|
firewall rules). This mode presumes that the local LAN router has suitable
|
|
routing table entries to return traffic to this host, and that some other
|
|
management system has been used to put in place any necessary firewall
|
|
rules. Although no firewall rules will be added for the network, it is of
|
|
course still possible to add restrictions for specific guests using
|
|
`nwfilter rules <formatnwfilter.html>`__ on the guests' interfaces.)
|
|
:since:`Since 2.2.0`
|
|
``bridge``
|
|
This network describes either 1) an existing host bridge that was
|
|
configured outside of libvirt (if a ``<bridge name='xyz'/>`` element has
|
|
been specified, :since:`Since 0.9.4` ), 2) an existing Open vSwitch bridge
|
|
that was configured outside of libvirt (if both a ``<bridge name='xyz'/>``
|
|
element **and** a ``<virtualport type='openvswitch'/>`` have
|
|
been specified :since:`Since 0.10.0` ) 3) an interface or group of
|
|
interfaces to be used for a "direct" connection via macvtap using
|
|
macvtap's "bridge" mode (if the forward element has one or more
|
|
``<interface>`` subelements, :since:`Since 0.9.4` ) (see `Direct
|
|
attachment to physical interface <formatdomain.html#direct-attachment-to-physical-interface>`__
|
|
for descriptions of the various macvtap modes). libvirt doesn't attempt to
|
|
manage the bridge interface at all, thus the ``<bridge>`` element's
|
|
``stp`` and ``delay`` attributes are not allowed; no iptables rules, IP
|
|
addresses, or DHCP/DNS services are added; at the IP level, the guest
|
|
interface appears to be directly connected to the physical interface.
|
|
:since:`Since 0.9.4`
|
|
``private``
|
|
This network uses a macvtap "direct" connection in "private" mode to
|
|
connect each guest to the network. The physical interface to be used will
|
|
be picked from among those listed in ``<interface>`` subelements of the
|
|
``<forward>`` element; when using 802.1Qbh mode (as indicated by the
|
|
``<virtualport>`` type attribute - note that this requires an
|
|
802.1Qbh-capable hardware switch), each physical interface can only be in
|
|
use by a single guest interface at a time; in modes other than 802.1Qbh,
|
|
multiple guest interfaces can share each physical interface (libvirt will
|
|
attempt to balance usage between all available interfaces). :since:`Since
|
|
0.9.4`
|
|
``vepa``
|
|
This network uses a macvtap "direct" connection in "vepa" mode to connect
|
|
each guest to the network (this requires that the physical interfaces used
|
|
be connected to a vepa-capable hardware switch. The physical interface to
|
|
be used will be picked from among those listed in ``<interface>``
|
|
subelements of the ``<forward>`` element; multiple guest interfaces can
|
|
share each physical interface (libvirt will attempt to balance usage
|
|
between all available interfaces). :since:`Since 0.9.4`
|
|
``passthrough``
|
|
This network uses a macvtap "direct" connection in "passthrough" mode to
|
|
connect each guest to the network (note that this is *not* the same thing
|
|
as "PCI passthrough"). The physical interface to be used will be picked
|
|
from among those listed in ``<interface>`` subelements of the
|
|
``<forward>`` element. Each physical interface can only be in use by a
|
|
single guest interface at a time, so libvirt will keep track of which
|
|
interfaces are currently in use, and only assign unused interfaces (if
|
|
there are no available physical interfaces when a domain interface is
|
|
being attached, an error will be logged, and the operation causing the
|
|
attach will fail (usually either a domain start, or a hotplug interface
|
|
attach to a domain). :since:`Since 0.9.4`
|
|
``hostdev``
|
|
This network facilitates PCI Passthrough of a network device. A network
|
|
device is chosen from the interface pool and directly assigned to the
|
|
guest using generic device passthrough, after first optionally setting the
|
|
device's MAC address and vlan tag to the configured value, and optionally
|
|
associating the device with an 802.1Qbh capable switch using a
|
|
``<virtualport>`` element. Note that - due to limitations in standard
|
|
single-port PCI ethernet card driver design - only SR-IOV (Single Root I/O
|
|
Virtualization) virtual function (VF) devices can be assigned in this
|
|
manner; to assign a standard single-port PCI or PCIe ethernet card to a
|
|
guest, use the traditional ``<hostdev>`` device definition. :since:` Since
|
|
0.10.0`
|
|
|
|
To force use of a particular type of device assignment, a <forward
|
|
type='hostdev'> interface can have an optional ``driver`` sub-element with
|
|
a ``name`` attribute set to either "vfio" (VFIO is a new method of device
|
|
assignment that is compatible with UEFI Secure Boot) or "kvm" (the legacy
|
|
device assignment handled directly by the KVM kernel module) :since:`Since
|
|
1.0.5 (QEMU and KVM only, requires kernel 3.6 or newer)` . When specified,
|
|
device assignment will fail if the requested method of device assignment
|
|
isn't available on the host. When not specified, the default is "vfio" on
|
|
systems where the VFIO driver is available and loaded, and "kvm" on older
|
|
systems, or those where the VFIO driver hasn't been loaded :since:`Since
|
|
1.1.3` (prior to that the default was always "kvm").
|
|
|
|
Note that this "intelligent passthrough" of network devices is very
|
|
similar to the functionality of a standard ``<hostdev>`` device, the
|
|
difference being that this method allows specifying a MAC address, vlan
|
|
tag, and ``<virtualport>`` for the passed-through device. If these
|
|
capabilities are not required, if you have a standard single-port PCI,
|
|
PCIe, or USB network card that doesn't support SR-IOV (and hence would
|
|
anyway lose the configured MAC address during reset after being assigned
|
|
to the guest domain), or if you are using a version of libvirt older than
|
|
0.10.0, you should use a standard ``<hostdev>`` device definition in the
|
|
domain's configuration to assign the device to the guest instead of
|
|
defining an ``<interface type='network'>`` pointing to a
|
|
network with ``<forward mode='hostdev'/>``.
|
|
|
|
As mentioned above, a ``<forward>`` element can have multiple ``<interface>``
|
|
subelements, each one giving the name of a physical interface that can be
|
|
used for this network :since:`Since 0.9.4` :
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='passthrough'>
|
|
<interface dev='eth10'/>
|
|
<interface dev='eth11'/>
|
|
<interface dev='eth12'/>
|
|
<interface dev='eth13'/>
|
|
<interface dev='eth14'/>
|
|
</forward>
|
|
...
|
|
|
|
:since:`since 0.10.0` , ``<interface>`` also has an optional read-only
|
|
attribute - when examining the live configuration of a network, the attribute
|
|
``connections``, if present, specifies the number of guest interfaces
|
|
currently connected via this physical interface.
|
|
|
|
Additionally, :since:`since 0.9.10` , libvirt allows a shorthand for
|
|
specifying all virtual interfaces associated with a single physical function,
|
|
by using the ``<pf>`` subelement to call out the corresponding physical
|
|
interface associated with multiple virtual interfaces:
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='passthrough'>
|
|
<pf dev='eth0'/>
|
|
</forward>
|
|
...
|
|
|
|
When a guest interface is being constructed, libvirt will pick an interface
|
|
from this list to use for the connection. In modes where physical interfaces
|
|
can be shared by multiple guest interfaces, libvirt will choose the interface
|
|
that currently has the least number of connections. For those modes that do
|
|
not allow sharing of the physical device (in particular, 'passthrough' mode,
|
|
and 'private' mode when using 802.1Qbh), libvirt will choose an unused
|
|
physical interface or, if it can't find an unused interface, fail the
|
|
operation.
|
|
|
|
:since:`since 0.10.0` When using forward mode 'hostdev', the interface pool
|
|
is specified with a list of ``<address>`` elements, each of which has
|
|
``<type>`` (must always be ``'pci'``), ``<domain>``, ``<bus>``,
|
|
``<slot>``\ and ``<function>`` attributes.
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='hostdev' managed='yes'>
|
|
<driver name='vfio'/>
|
|
<address type='pci' domain='0' bus='4' slot='0' function='1'/>
|
|
<address type='pci' domain='0' bus='4' slot='0' function='2'/>
|
|
<address type='pci' domain='0' bus='4' slot='0' function='3'/>
|
|
</forward>
|
|
...
|
|
|
|
Alternatively the interface pool can also be defined using a single physical
|
|
function ``<pf>`` subelement to call out the corresponding physical interface
|
|
associated with multiple virtual interfaces (similar to passthrough mode):
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='hostdev' managed='yes'>
|
|
<pf dev='eth0'/>
|
|
</forward>
|
|
...
|
|
|
|
Quality of service
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='nat' dev='eth0'/>
|
|
<bandwidth>
|
|
<inbound average='1000' peak='5000' burst='5120'/>
|
|
<outbound average='128' peak='256' burst='256'/>
|
|
</bandwidth>
|
|
...
|
|
|
|
The ``<bandwidth>`` element allows setting quality of service for a particular
|
|
network ( :since:`since 0.9.4` ). Setting ``bandwidth`` for a network is
|
|
supported only for networks with a ``<forward>`` mode of ``route``, ``nat``,
|
|
``bridge``, or no mode at all (i.e. an "isolated" network). Setting
|
|
``bandwidth`` is **not** supported for forward modes ``passthrough``,
|
|
``private``, or ``hostdev``. Attempts to do this will lead to a failure to
|
|
define the network or to create a transient network.
|
|
|
|
The ``<bandwidth>`` element can only be a subelement of a domain's
|
|
``<interface>``, a subelement of a ``<network>``, or a subelement of a
|
|
``<portgroup>`` in a ``<network>``.
|
|
|
|
As a subelement of a domain's ``<interface>``, the bandwidth only applies to
|
|
that one interface of the domain. As a subelement of a ``<network>``, the
|
|
bandwidth is a total aggregate bandwidth to/from all guest interfaces attached
|
|
to that network, **not** to each guest interface individually. If a domain's
|
|
``<interface>`` has ``<bandwidth>`` element values higher than the aggregate for
|
|
the entire network, then the aggregate bandwidth for the ``<network>`` takes
|
|
precedence. This is because the two choke points are independent of each other
|
|
where the domain's ``<interface>`` bandwidth control is applied on the
|
|
interface's tap device, while the ``<network>`` bandwidth control is applied on
|
|
the interface part of the bridge device created for that network.
|
|
|
|
As a subelement of a ``<portgroup>`` in a ``<network>``, if a domain's
|
|
``<interface>`` has a ``portgroup`` attribute in its ``<source>`` element
|
|
**and** if the ``<interface>`` itself has no ``<bandwidth>`` element, then the
|
|
``<bandwidth>`` element of the portgroup will be applied individually to each
|
|
guest interface defined to be a member of that portgroup. Any ``<bandwidth>``
|
|
element in the domain's ``<interface>`` definition will override the setting in
|
|
the portgroup ( :since:`since 1.0.1` ).
|
|
|
|
Incoming and outgoing traffic can be shaped independently. The ``bandwidth``
|
|
element can have at most one ``inbound`` and at most one ``outbound`` child
|
|
element. Leaving either of these children elements out results in no QoS applied
|
|
for that traffic direction. So, when you want to shape only incoming traffic,
|
|
use ``inbound`` only, and vice versa. Each of these elements have one mandatory
|
|
attribute - ``average`` (or ``floor`` as described below). The attributes are as
|
|
follows, where accepted values for each attribute is an integer number.
|
|
|
|
``average``
|
|
Specifies the desired average bit rate for the interface being shaped (in
|
|
kilobytes/second).
|
|
``peak``
|
|
Optional attribute which specifies the maximum rate at which the bridge can
|
|
send data (in kilobytes/second). Note the limitation of implementation: this
|
|
attribute in the ``outbound`` element is ignored (as Linux ingress filters
|
|
don't know it yet).
|
|
``burst``
|
|
Optional attribute which specifies the amount of kibibytes that can be
|
|
transmitted in a single burst at ``peak`` speed.
|
|
``floor``
|
|
Optional attribute available only for the ``inbound`` element. This attribute
|
|
guarantees minimal throughput for shaped interfaces. This, however, requires
|
|
that all traffic goes through one point where QoS decisions can take place,
|
|
hence why this attribute works only for virtual networks for now (that is
|
|
``<interface type='network'/>`` with a forward type of route, nat, open or no
|
|
forward at all). Moreover, the virtual network the interface is connected to
|
|
is required to have at least inbound QoS set (``average`` at least). If using
|
|
the ``floor`` attribute users don't need to specify ``average``. However,
|
|
``peak`` and ``burst`` attributes still require ``average``. Currently, the
|
|
Linux kernel doesn't allow ingress qdiscs to have any classes therefore
|
|
``floor`` can be applied only on ``inbound`` and not ``outbound``.
|
|
|
|
Attributes ``average``, ``peak``, and ``burst`` are available :since:`since
|
|
0.9.4` , while the ``floor`` attribute is available :since:`since 1.0.1` .
|
|
|
|
Setting VLAN tag (on supported network types only)
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>ovs-net</name>
|
|
<forward mode='bridge'/>
|
|
<bridge name='ovsbr0'/>
|
|
<virtualport type='openvswitch'>
|
|
<parameters interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
|
|
</virtualport>
|
|
<vlan trunk='yes'>
|
|
<tag id='42' nativeMode='untagged'/>
|
|
<tag id='47'/>
|
|
</vlan>
|
|
<portgroup name='dontpanic'>
|
|
<vlan>
|
|
<tag id='42'/>
|
|
</vlan>
|
|
</portgroup>
|
|
</network>
|
|
|
|
If (and only if) the network connection used by the guest supports VLAN tagging
|
|
transparent to the guest, an optional ``<vlan>`` element can specify one or more
|
|
VLAN tags to apply to the guest's network traffic :since:`Since 0.10.0` .
|
|
Network connections that support guest-transparent VLAN tagging include 1)
|
|
type='bridge' interfaces connected to an Open vSwitch bridge :since:`Since
|
|
0.10.0` , 2) SRIOV Virtual Functions (VF) used via type='hostdev' (direct device
|
|
assignment) :since:`Since 0.10.0` , and 3) SRIOV VFs used via type='direct' with
|
|
mode='passthrough' (macvtap "passthru" mode) :since:`Since 1.3.5` . All other
|
|
connection types, including standard linux bridges and libvirt's own virtual
|
|
networks, **do not** support it. 802.1Qbh (vn-link) and 802.1Qbg (VEPA) switches
|
|
provide their own way (outside of libvirt) to tag guest traffic onto a specific
|
|
VLAN. Each tag is given in a separate ``<tag>`` subelement of ``<vlan>`` (for
|
|
example: ``<tag id='42'/>``). For VLAN trunking of multiple tags (which is
|
|
supported only on Open vSwitch connections), multiple ``<tag>`` subelements can
|
|
be specified, which implies that the user wants to do VLAN trunking on the
|
|
interface for all the specified tags. In the case that VLAN trunking of a single
|
|
tag is desired, the optional attribute ``trunk='yes'`` can be added to the
|
|
toplevel ``<vlan>`` element to differentiate trunking of a single tag from
|
|
normal tagging.
|
|
|
|
For network connections using Open vSwitch it is also possible to configure
|
|
'native-tagged' and 'native-untagged' VLAN modes :since:`Since 1.1.0.` This is
|
|
done with the optional ``nativeMode`` attribute on the ``<tag>`` subelement:
|
|
``nativeMode`` may be set to 'tagged' or 'untagged'. The ``id`` attribute of the
|
|
``<tag>`` subelement containing ``nativeMode`` sets which VLAN is considered to
|
|
be the "native" VLAN for this interface, and the ``nativeMode`` attribute
|
|
determines whether or not traffic for that VLAN will be tagged.
|
|
|
|
``<vlan>`` elements can also be specified in a ``<portgroup>`` element, as well
|
|
as directly in a domain's ``<interface>`` element. In the case that a vlan tag
|
|
is specified in multiple locations, the setting in ``<interface>`` takes
|
|
precedence, followed by the setting in the ``<portgroup>`` selected by the
|
|
interface config. The ``<vlan>`` in ``<network>`` will be selected only if none
|
|
is given in ``<portgroup>`` or ``<interface>``.
|
|
|
|
Isolating ports from one another
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>isolated-ports</name>
|
|
<forward mode='bridge'/>
|
|
<bridge name='br0'/>
|
|
<port isolated='yes'/>
|
|
</network>
|
|
|
|
:since:`Since 6.1.0.` The ``port`` element property ``isolated``, when set to
|
|
``yes`` (default setting is ``no``) is used to isolate the network traffic of
|
|
each guest on the network from all other guests connected to the network; it
|
|
does not have an effect on communication between the guests and the host, or
|
|
between the guests and destinations beyond this network. This setting is only
|
|
supported for networks that use a Linux host bridge to connect guest interfaces
|
|
via a standard tap device (i.e. those with a forward mode of nat, route, open,
|
|
bridge, or no forward mode).
|
|
|
|
Portgroups
|
|
^^^^^^^^^^
|
|
|
|
::
|
|
|
|
...
|
|
<forward mode='private'/>
|
|
<interface dev="eth20"/>
|
|
<interface dev="eth21"/>
|
|
<interface dev="eth22"/>
|
|
<interface dev="eth23"/>
|
|
<interface dev="eth24"/>
|
|
</forward>
|
|
<portgroup name='engineering' default='yes'>
|
|
<virtualport type='802.1Qbh'>
|
|
<parameters profileid='test'/>
|
|
</virtualport>
|
|
<bandwidth>
|
|
<inbound average='1000' peak='5000' burst='5120'/>
|
|
<outbound average='1000' peak='5000' burst='5120'/>
|
|
</bandwidth>
|
|
</portgroup>
|
|
<portgroup name='sales' trustGuestRxFilters='no'>
|
|
<virtualport type='802.1Qbh'>
|
|
<parameters profileid='salestest'/>
|
|
</virtualport>
|
|
<bandwidth>
|
|
<inbound average='500' peak='2000' burst='2560'/>
|
|
<outbound average='128' peak='256' burst='256'/>
|
|
</bandwidth>
|
|
</portgroup>
|
|
...
|
|
|
|
:since:`Since 0.9.4` A portgroup provides a method of easily putting guest
|
|
connections to the network into different classes, with each class potentially
|
|
having a different level/type of service. :since:`Since 0.9.4` Each network can
|
|
have multiple portgroup elements (and one of those can optionally be designated
|
|
as the 'default' portgroup for the network), and each portgroup has a name, as
|
|
well as various attributes and subelements associated with it. The currently
|
|
supported subelements are ``<bandwidth>`` (described in `Quality of service`_)
|
|
and ``<virtualport>`` (documented
|
|
`here <formatdomain.html#direct-attachment-to-physical-interface>`__). If a domain interface
|
|
definition specifies a portgroup (by adding a ``portgroup`` attribute to the
|
|
``<source>`` subelement), that portgroup's info will be merged into the
|
|
interface's configuration. If no portgroup is given in the interface definition,
|
|
and one of the network's portgroups has ``default='yes'``, that default
|
|
portgroup will be used. If no portgroup is given in the interface definition,
|
|
and there is no default portgroup, then none will be used. Any ``<bandwidth>``
|
|
specified directly in the domain XML will take precedence over any setting in
|
|
the chosen portgroup. if a ``<virtualport>`` is specified in the portgroup
|
|
(and/or directly in the network definition), the multiple virtualports will be
|
|
merged, and any parameter that is specified in more than one virtualport, and is
|
|
not identical, will be considered an error, and will prevent the interface from
|
|
starting.
|
|
|
|
portgroups also support the optional parameter ``trustGuestRxFilters`` which can
|
|
be used to set that attribute of the same name for each domain interface using
|
|
this portgroup ( :since:`since 1.2.10` ). See the `Network
|
|
interfaces <formatdomain.html#network-interfaces>`__ section of the domain XML
|
|
documentation for more details. Note that an explicit setting of this attribute
|
|
in the portgroup overrides the network-wide setting, and an explicit setting in
|
|
the individual domain interface will override the setting in the portgroup.
|
|
|
|
Static Routes
|
|
^^^^^^^^^^^^^
|
|
|
|
Static route definitions are used to provide routing information to the
|
|
virtualization host for networks which are not directly reachable from the
|
|
virtualization host, but \*are\* reachable from a guest domain that is itself
|
|
reachable from the host :since:`since 1.0.6` .
|
|
|
|
As shown in `Network config with no gateway addresses`_ example, it is
|
|
possible to define a virtual network interface with no IPv4 or IPv6 addresses.
|
|
Such networks are useful to provide host connectivity to networks which are only
|
|
reachable via a guest. A guest with connectivity both to the guest-only network
|
|
and to another network that is directly reachable from the host can act as a
|
|
gateway between the networks. A static route added to the "host-visible" network
|
|
definition provides the routing information so that IP packets can be sent from
|
|
the virtualization host to guests on the hidden network.
|
|
|
|
Here is a fragment of a definition which shows the static route specification as
|
|
well as the IPv4 and IPv6 definitions for network addresses which are referred
|
|
to in the ``gateway`` gateway address specifications. Note that the third static
|
|
route specification includes the ``metric`` attribute specification with a value
|
|
of 2. This particular route would \*not\* be preferred if there was another
|
|
existing rout on the system with the same address and prefix but with a lower
|
|
value for the metric. If there is a route in the host system configuration that
|
|
should be overridden by a route in a virtual network whenever the virtual
|
|
network is running, the configuration for the system-defined route should be
|
|
modified to have a higher metric, and the route on the virtual network given a
|
|
lower metric (for example, the default metric of "1").
|
|
|
|
::
|
|
|
|
...
|
|
<ip address="192.168.122.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.122.128" end="192.168.122.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<route address="192.168.222.0" prefix="24" gateway="192.168.122.2"/>
|
|
<ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64"/>
|
|
<route family="ipv6" address="2001:db8:ca2:3::" prefix="64" gateway="2001:db8:ca2:2::2"/>
|
|
<route family="ipv6" address="2001:db9:4:1::" prefix="64" gateway="2001:db8:ca2:2::3" metric='2'/>
|
|
...
|
|
|
|
Addressing
|
|
~~~~~~~~~~
|
|
|
|
The final set of elements define the addresses (IPv4 and/or IPv6, as well as
|
|
MAC) to be assigned to the bridge device associated with the virtual network,
|
|
and optionally enable DHCP services. These elements are only valid for isolated
|
|
networks (no ``forward`` element specified), and for those with a forward mode
|
|
of 'route' or 'nat'.
|
|
|
|
::
|
|
|
|
...
|
|
<mac address='00:16:3E:5D:C7:9E'/>
|
|
<domain name="example.com"/>
|
|
<dns>
|
|
<txt name="example" value="example value"/>
|
|
<forwarder addr="8.8.8.8"/>
|
|
<forwarder domain='example.com' addr="8.8.4.4"/>
|
|
<forwarder domain='www.example.com'/>
|
|
<srv service='name' protocol='tcp' domain='test-domain-name' target='.'
|
|
port='1024' priority='10' weight='10'/>
|
|
<host ip='192.168.122.2'>
|
|
<hostname>myhost</hostname>
|
|
<hostname>myhostalias</hostname>
|
|
</host>
|
|
</dns>
|
|
<ip address="192.168.122.1" netmask="255.255.255.0" localPtr="yes">
|
|
<dhcp>
|
|
<range start="192.168.122.100" end="192.168.122.254">
|
|
<lease expiry='1' unit='hours'/>
|
|
</range>
|
|
<host mac="00:16:3e:77:e2:ed" name="foo.example.com" ip="192.168.122.10">
|
|
<lease expiry='30' unit='minutes'/>
|
|
</host>
|
|
<host mac="00:16:3e:3e:a9:1a" name="bar.example.com" ip="192.168.122.11"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64" localPtr="yes"/>
|
|
<route family="ipv6" address="2001:db9:ca1:1::" prefix="64" gateway="2001:db8:ca2:2::2"/>
|
|
|
|
``mac``
|
|
The ``address`` attribute defines a MAC (hardware) address formatted as 6
|
|
groups of 2-digit hexadecimal numbers, the groups separated by colons (eg,
|
|
``"52:54:00:1C:DA:2F"``). This MAC address is assigned to the bridge device
|
|
when it is created. Generally it is best to not specify a MAC address when
|
|
creating a network - in this case, if a defined MAC address is needed for
|
|
proper operation, libvirt will automatically generate a random MAC address
|
|
and save it in the config. Allowing libvirt to generate the MAC address will
|
|
assure that it is compatible with the idiosyncrasies of the platform where
|
|
libvirt is running. :since:`Since 0.8.8`
|
|
``dns``
|
|
The dns element of a network contains configuration information for the
|
|
virtual network's DNS server :since:`Since 0.9.3` .
|
|
|
|
The dns element can have an optional ``enable`` attribute :since:`Since
|
|
2.2.0` . If ``enable`` is "no", then no DNS server will be setup by libvirt
|
|
for this network (and any other configuration in ``<dns>`` will be ignored).
|
|
If ``enable`` is "yes" or unspecified (including the complete absence of any
|
|
``<dns>`` element) then a DNS server will be setup by libvirt to listen on
|
|
all IP addresses specified in the network's configuration.
|
|
|
|
The dns element can have an optional ``forwardPlainNames`` attribute
|
|
:since:`Since 1.1.2` . If ``forwardPlainNames`` is "no", then DNS resolution
|
|
requests for names that are not qualified with a domain (i.e. names with no
|
|
"." character) will not be forwarded to the host's upstream DNS server - they
|
|
will only be resolved if they are known locally within the virtual network's
|
|
own DNS server. If ``forwardPlainNames`` is "yes", unqualified names **will**
|
|
be forwarded to the upstream DNS server if they can't be resolved by the
|
|
virtual network's own DNS server.
|
|
|
|
Currently supported sub-elements of ``<dns>`` are:
|
|
|
|
``forwarder``
|
|
The dns element can have 0 or more ``<forwarder>`` elements. Each
|
|
forwarder element defines an alternate DNS server to use for some, or all,
|
|
DNS requests sent to this network's DNS server. There are two attributes -
|
|
``domain``, and ``addr``; at least one of these must be specified in any
|
|
``<forwarder>`` element. If both ``domain`` and ``addr`` are specified,
|
|
then all requests that match the given domain will be forwarded to the DNS
|
|
server at addr. If only ``domain`` is specified, then all matching domains
|
|
will be resolved locally (or via the host's standard DNS forwarding if
|
|
they can't be resolved locally). If an ``addr`` is specified by itself,
|
|
then all DNS requests to the network's DNS server will be forwarded to the
|
|
DNS server at that address with no exceptions. ``addr`` :since:`Since
|
|
1.1.3` , ``domain`` :since:`Since 2.2.0` .
|
|
``txt``
|
|
A ``dns`` element can have 0 or more ``txt`` elements. Each txt element
|
|
defines a DNS TXT record and has two attributes, both required: a name
|
|
that can be queried via dns, and a value that will be returned when that
|
|
name is queried. names cannot contain embedded spaces or commas. value is
|
|
a single string that can contain multiple values separated by commas.
|
|
:since:`Since 0.9.3`
|
|
``host``
|
|
The ``host`` element within ``dns`` is the definition of DNS hosts to be
|
|
passed to the DNS service. The IP address is identified by the ``ip``
|
|
attribute and the names for that IP address are identified in the
|
|
``hostname`` sub-elements of the ``host`` element. :since:`Since 0.9.3`
|
|
|
|
``srv``
|
|
The ``dns`` element can have also 0 or more ``srv`` record elements. Each
|
|
``srv`` record element defines a DNS SRV record and has 2 mandatory and 5
|
|
optional attributes. The mandatory attributes are ``service`` and
|
|
``protocol`` (tcp, udp) and the optional attributes are ``target``,
|
|
``port``, ``priority``, ``weight`` and ``domain`` as defined in DNS server
|
|
SRV RFC (RFC 2782). :since:`Since 0.9.9`
|
|
|
|
``ip``
|
|
The ``address`` attribute defines an IPv4 address in dotted-decimal format,
|
|
or an IPv6 address in standard colon-separated hexadecimal format, that will
|
|
be configured on the bridge device associated with the virtual network. To
|
|
the guests this IPv4 address will be their IPv4 default route. For IPv6, the
|
|
default route is established via Router Advertisement. For IPv4 addresses,
|
|
the ``netmask`` attribute defines the significant bits of the network
|
|
address, again specified in dotted-decimal format. For IPv6 addresses, and as
|
|
an alternate method for IPv4 addresses, the significant bits of the network
|
|
address can be specified with the ``prefix`` attribute, which is an integer
|
|
(for example, ``netmask='255.255.255.0'`` could also be given as
|
|
``prefix='24'``). The ``family`` attribute is used to specify the type of
|
|
address - ``ipv4`` or ``ipv6``; if no ``family`` is given, ``ipv4`` is
|
|
assumed. More than one address of each family can be defined for a network.
|
|
The optional ``localPtr`` attribute ( :since:`since 3.0.0` ) configures the
|
|
DNS server to not forward any reverse DNS requests for IP addresses from the
|
|
network configured by the ``address`` and ``netmask``/``prefix`` attributes.
|
|
For some unusual network prefixes (not divisible by 8 for IPv4 or not
|
|
divisible by 4 for IPv6) libvirt may be unable to compute the PTR domain
|
|
automatically. The ``ip`` element is supported :since:`since 0.3.0` . IPv6,
|
|
multiple addresses on a single network, ``family``, and ``prefix`` are
|
|
supported :since:`since 0.8.7` . The ``ip`` element may contain the following
|
|
elements:
|
|
|
|
``tftp``
|
|
The optional ``tftp`` element and its mandatory ``root`` attribute enable
|
|
TFTP services. The attribute specifies the path to the root directory
|
|
served via TFTP. The ``tftp`` element is not supported for IPv6 addresses,
|
|
and can only be specified on a single IPv4 address per network.
|
|
:since:`Since 0.7.1`
|
|
``dhcp``
|
|
The presence of this element enables DHCP services on the virtual network.
|
|
The ``dhcp`` element is supported for both IPv4 ( :since:`since 0.3.0` )
|
|
and IPv6 ( :since:`since 1.0.1` ), but only for one IP address of each
|
|
type per network. The following sub-elements are supported:
|
|
|
|
``range``
|
|
The ``start`` and ``end`` attributes on the ``range`` element specify
|
|
the boundaries of a pool of addresses to be provided to DHCP clients.
|
|
These two addresses must lie within the scope of the network defined on
|
|
the parent ``ip`` element. There may be zero or more ``range`` elements
|
|
specified. :since:`Since 0.3.0`
|
|
``host``
|
|
Within the ``dhcp`` element there may be zero or more ``host``
|
|
elements. These specify hosts which will be given names and predefined
|
|
IP addresses by the built-in DHCP server. Any IPv4 ``host`` element
|
|
must specify the MAC address of the host to be assigned a given name
|
|
(via the ``mac`` attribute), the IP to be assigned to that host (via
|
|
the ``ip`` attribute), and the name itself (the ``name`` attribute).
|
|
The IPv6 ``host`` element differs slightly from that for IPv4: there is
|
|
no ``mac`` attribute since a MAC address has no defined meaning in
|
|
IPv6. Instead, the ``name`` attribute is used to identify the host to
|
|
be assigned the IPv6 address. For DHCPv6, the name is the plain name of
|
|
the client host sent by the client to the server. Note that this method
|
|
of assigning a specific IP address can also be used for IPv4 instead of
|
|
the ``mac`` attribute. :since:`Since 0.4.5`
|
|
``bootp``
|
|
The optional ``bootp`` element specifies BOOTP options to be provided
|
|
by the DHCP server for IPv4 only. Two attributes are supported:
|
|
``file`` is mandatory and gives the file to be used for the boot image;
|
|
``server`` is optional and gives the address of the TFTP server from
|
|
which the boot image will be fetched. ``server`` defaults to the same
|
|
host that runs the DHCP server, as is the case when the ``tftp``
|
|
element is used. The BOOTP options currently have to be the same for
|
|
all address ranges and statically assigned addresses. :since:`Since
|
|
0.7.1` (``server`` :since:`since 0.7.3` )
|
|
|
|
Optionally, ``range`` and ``host`` elements can have ``lease`` child
|
|
element which specifies the lease time through it's attributes ``expiry``
|
|
and ``unit`` (which accepts ``seconds``, ``minutes`` and ``hours`` and
|
|
defaults to ``minutes`` if omitted). The minimal lease time is 2 minutes,
|
|
except when setting an infinite lease time (``expiry='0'``). :since:`Since
|
|
6.3.0`
|
|
|
|
Network namespaces
|
|
~~~~~~~~~~~~~~~~~~
|
|
|
|
A special XML namespace is available for passing options directly to the
|
|
underlying dnsmasq configuration file :since:`since 5.6.0` . Usage of XML
|
|
namespaces comes with no support guarantees, so use at your own risk.
|
|
|
|
This example XML will pass the option strings ``foo=bar`` and
|
|
``cname=*.foo.example.com,master.example.com`` directly to the underlying
|
|
dnsmasq instance.
|
|
|
|
::
|
|
|
|
<network xmlns:dnsmasq='http://libvirt.org/schemas/network/dnsmasq/1.0'>
|
|
...
|
|
<dnsmasq:options>
|
|
<dnsmasq:option value="foo=bar"/>
|
|
<dnsmasq:option value="cname=*.foo.example.com,master.example.com"/>
|
|
</dnsmasq:options>
|
|
</network>
|
|
|
|
Example configuration
|
|
---------------------
|
|
|
|
NAT based network
|
|
~~~~~~~~~~~~~~~~~
|
|
|
|
This example is the so called "default" virtual network. It is provided and
|
|
enabled out-of-the-box for all libvirt installations. This is a configuration
|
|
that allows guest OS to get outbound connectivity regardless of whether the host
|
|
uses ethernet, wireless, dialup, or VPN networking without requiring any
|
|
specific admin configuration. In the absence of host networking, it at least
|
|
allows guests to talk directly to each other.
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>default</name>
|
|
<bridge name="virbr0"/>
|
|
<forward mode="nat"/>
|
|
<ip address="192.168.122.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.122.2" end="192.168.122.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64"/>
|
|
</network>
|
|
|
|
Below is a variation of the above example which adds an IPv6 dhcp range
|
|
definition.
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>default6</name>
|
|
<bridge name="virbr0"/>
|
|
<forward mode="nat"/>
|
|
<ip address="192.168.122.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.122.2" end="192.168.122.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64">
|
|
<dhcp>
|
|
<range start="2001:db8:ca2:2:1::10" end="2001:db8:ca2:2:1::ff"/>
|
|
</dhcp>
|
|
</ip>
|
|
</network>
|
|
|
|
IPv6 NAT based network
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Below is a variation for also providing IPv6 NAT. This can be especially useful
|
|
when using multiple interfaces where some, such as WiFi cards, can not be
|
|
bridged (usually on a laptop), making it difficult to provide end-to-end IPv6
|
|
routing.
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>default6</name>
|
|
<bridge name="virbr0"/>
|
|
<forward mode="nat">
|
|
<nat ipv6='yes'>
|
|
<port start='1024' end='65535'/>
|
|
</nat>
|
|
</forward>
|
|
<ip address="192.168.122.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.122.2" end="192.168.122.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="fdXX:XXXX:XXXX:NNNN::" prefix="64"/>
|
|
</network>
|
|
|
|
IPv6 NAT addressing has some caveats over the more straight forward IPv4 case.
|
|
`RFC 4193 <https://tools.ietf.org/html/rfc4193>`__ defines the address range
|
|
fd00::/8 for /48 IPv6 private networks. It should be concatenated with a random
|
|
40-bit string (i.e. 10 random hexadecimal digits replacing the X values above,
|
|
RFC 4193 provides an
|
|
`algorithm <https://tools.ietf.org/html/rfc4193#section-3.2.2>`__ if you do not
|
|
have a source of sufficient randomness). This leaves 0 through ffff for subnets
|
|
(N above) which you can use at will.
|
|
|
|
Many operating systems will not consider these addresses as preferential to
|
|
IPv4, due to some practical history of these addresses being present but
|
|
unroutable and causing networking issues. On many Linux distributions, you may
|
|
need to override /etc/gai.conf with values from `RFC
|
|
3484 <https://www.ietf.org/rfc/rfc3484.txt>`__ to have your IPv6 NAT network
|
|
correctly preferenced over IPv4.
|
|
|
|
Routed network config
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
This is a variant on the default network which routes traffic from the virtual
|
|
network to the LAN without applying any NAT. It requires that the IP address
|
|
range be pre-configured in the routing tables of the router on the host network.
|
|
This example further specifies that guest traffic may only go out via the
|
|
``eth1`` host network device.
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>local</name>
|
|
<bridge name="virbr1"/>
|
|
<forward mode="route" dev="eth1"/>
|
|
<ip address="192.168.122.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.122.2" end="192.168.122.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64"/>
|
|
</network>
|
|
|
|
Below is another IPv6 variation. Instead of a dhcp range being specified, this
|
|
example has a couple of IPv6 host definitions. Note that most of the dhcp host
|
|
definitions use an "id" (client id or DUID) since this has proven to be a more
|
|
reliable way of specifying the interface and its association with an IPv6
|
|
address. The first is a DUID-LLT, the second a DUID-LL, and the third a
|
|
DUID-UUID. :since:`Since 1.0.3`
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>local6</name>
|
|
<bridge name="virbr1"/>
|
|
<forward mode="route" dev="eth1"/>
|
|
<ip address="192.168.122.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.122.2" end="192.168.122.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64">
|
|
<dhcp>
|
|
<host name="paul" ip="2001:db8:ca2:2:3::1"/>
|
|
<host id="0:1:0:1:18:aa:62:fe:0:16:3e:44:55:66" ip="2001:db8:ca2:2:3::2"/>
|
|
<host id="0:3:0:1:0:16:3e:11:22:33" name="ralph" ip="2001:db8:ca2:2:3::3"/>
|
|
<host id="0:4:7e:7d:f0:7d:a8:bc:c5:d2:13:32:11:ed:16:ea:84:63"
|
|
name="badbob" ip="2001:db8:ca2:2:3::4"/>
|
|
</dhcp>
|
|
</ip>
|
|
</network>
|
|
|
|
Below is yet another IPv6 variation. This variation has only IPv6 defined with
|
|
DHCPv6 on the primary IPv6 network. A static link if defined for a second IPv6
|
|
network which will not be directly visible on the bridge interface but there
|
|
will be a static route defined for this network via the specified gateway. Note
|
|
that the gateway address must be directly reachable via (on the same subnet as)
|
|
one of the <ip> addresses defined for this <network>. :since:`Since 1.0.6`
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>net7</name>
|
|
<bridge name="virbr7"/>
|
|
<forward mode="route"/>
|
|
<ip family="ipv6" address="2001:db8:ca2:7::1" prefix="64">
|
|
<dhcp>
|
|
<range start="2001:db8:ca2:7::100" end="2001:db8:ca2::1ff"/>
|
|
<host id="0:4:7e:7d:f0:7d:a8:bc:c5:d2:13:32:11:ed:16:ea:84:63"
|
|
name="lucas" ip="2001:db8:ca2:2:3::4"/>
|
|
</dhcp>
|
|
</ip>
|
|
<route family="ipv6" address="2001:db8:ca2:8::" prefix="64" gateway="2001:db8:ca2:7::4"/>
|
|
</network>
|
|
|
|
Isolated network config
|
|
~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
This variant provides a completely isolated private network for guests. The
|
|
guests can talk to each other, and the host OS, but cannot reach any other
|
|
machines on the LAN, due to the omission of the ``forward`` element in the XML
|
|
description.
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>private</name>
|
|
<bridge name="virbr2"/>
|
|
<ip address="192.168.152.1" netmask="255.255.255.0">
|
|
<dhcp>
|
|
<range start="192.168.152.2" end="192.168.152.254"/>
|
|
</dhcp>
|
|
</ip>
|
|
<ip family="ipv6" address="2001:db8:ca2:3::1" prefix="64"/>
|
|
</network>
|
|
|
|
Isolated IPv6 network config
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
This variation of an isolated network defines only IPv6. Note that most of the
|
|
dhcp host definitions use an "id" (client id or DUID) since this has proven to
|
|
be a more reliable way of specifying the interface and its association with an
|
|
IPv6 address. The first is a DUID-LLT, the second a DUID-LL, and the third a
|
|
DUID-UUID. :since:`Since 1.0.3`
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>sixnet</name>
|
|
<bridge name="virbr6"/>
|
|
<ip family="ipv6" address="2001:db8:ca2:6::1" prefix="64">
|
|
<dhcp>
|
|
<host name="peter" ip="2001:db8:ca2:6:6::1"/>
|
|
<host id="0:1:0:1:18:aa:62:fe:0:16:3e:44:55:66" ip="2001:db8:ca2:6:6::2"/>
|
|
<host id="0:3:0:1:0:16:3e:11:22:33" name="dariusz" ip="2001:db8:ca2:6:6::3"/>
|
|
<host id="0:4:7e:7d:f0:7d:a8:bc:c5:d2:13:32:11:ed:16:ea:84:63"
|
|
name="anita" ip="2001:db8:ca2:6:6::4"/>
|
|
</dhcp>
|
|
</ip>
|
|
</network>
|
|
|
|
Using an existing host bridge
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
:since:`Since 0.9.4` This shows how to use a pre-existing host bridge "br0". The
|
|
guests will effectively be directly connected to the physical network (i.e.
|
|
their IP addresses will all be on the subnet of the physical network, and there
|
|
will be no restrictions on inbound or outbound connections).
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>host-bridge</name>
|
|
<forward mode="bridge"/>
|
|
<bridge name="br0"/>
|
|
</network>
|
|
|
|
Using a macvtap "direct" connection
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
:since:`Since 0.9.4, QEMU and KVM only, requires Linux kernel 2.6.34 or newer`
|
|
This shows how to use macvtap to connect to the physical network directly
|
|
through one of a group of physical devices (without using a host bridge device).
|
|
As with the host bridge network, the guests will effectively be directly
|
|
connected to the physical network so their IP addresses will all be on the
|
|
subnet of the physical network, and there will be no restrictions on inbound or
|
|
outbound connections. Note that, due to a limitation in the implementation of
|
|
macvtap, these connections do not allow communication directly between the host
|
|
and the guests - if you require this you will either need the attached physical
|
|
switch to be operating in a mirroring mode (so that all traffic coming to the
|
|
switch is reflected back to the host's interface), or provide alternate means
|
|
for this communication (e.g. a second interface on each guest that is connected
|
|
to an isolated network). The other forward modes that use macvtap (private,
|
|
vepa, and passthrough) would be used in a similar fashion.
|
|
|
|
::
|
|
|
|
<network>
|
|
<name>direct-macvtap</name>
|
|
<forward mode="bridge">
|
|
<interface dev="eth20"/>
|
|
<interface dev="eth21"/>
|
|
<interface dev="eth22"/>
|
|
<interface dev="eth23"/>
|
|
<interface dev="eth24"/>
|
|
</forward>
|
|
</network>
|
|
|
|
Network config with no gateway addresses
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
A valid network definition can contain no IPv4 or IPv6 addresses. Such a
|
|
definition can be used for a "very private" or "very isolated" network since it
|
|
will not be possible to communicate with the virtualization host via this
|
|
network. However, this virtual network interface can be used for communication
|
|
between virtual guest systems. This works for IPv4 and :since:`(Since 1.0.1)`
|
|
IPv6. However, the new ipv6='yes' must be added for guest-to-guest IPv6
|
|
communication.
|
|
|
|
::
|
|
|
|
<network ipv6='yes'>
|
|
<name>nogw</name>
|
|
<uuid>7a3b7497-1ec7-8aef-6d5c-38dff9109e93</uuid>
|
|
<bridge name="virbr2" stp="on" delay="0"/>
|
|
<mac address='00:16:3E:5D:C7:9E'/>
|
|
</network>
|