linux/drivers/usb/misc/rio500.c

537 lines
13 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/* -*- linux-c -*- */
/*
* Driver for USB Rio 500
*
* Cesar Miquel (miquel@df.uba.ar)
*
* based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
*
* Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
*
* Changelog:
* 30/05/2003 replaced lock/unlock kernel with up/down
* Daniele Bellucci bellucda@tiscali.it
* */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched/signal.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/wait.h>
#include "rio500_usb.h"
#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>"
#define DRIVER_DESC "USB Rio 500 driver"
#define RIO_MINOR 64
/* stall/wait timeout for rio */
#define NAK_TIMEOUT (HZ)
#define IBUF_SIZE 0x1000
/* Size of the rio buffer */
#define OBUF_SIZE 0x10000
struct rio_usb_data {
struct usb_device *rio_dev; /* init: probe_rio */
unsigned int ifnum; /* Interface number of the USB device */
int isopen; /* nz if open */
int present; /* Device is present on the bus */
char *obuf, *ibuf; /* transfer buffers */
char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
wait_queue_head_t wait_q; /* for timeouts */
struct mutex lock; /* general race avoidance */
};
static DEFINE_MUTEX(rio500_mutex);
static struct rio_usb_data rio_instance;
static int open_rio(struct inode *inode, struct file *file)
{
struct rio_usb_data *rio = &rio_instance;
/* against disconnect() */
mutex_lock(&rio500_mutex);
mutex_lock(&(rio->lock));
if (rio->isopen || !rio->present) {
mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return -EBUSY;
}
rio->isopen = 1;
init_waitqueue_head(&rio->wait_q);
mutex_unlock(&(rio->lock));
dev_info(&rio->rio_dev->dev, "Rio opened.\n");
mutex_unlock(&rio500_mutex);
return 0;
}
static int close_rio(struct inode *inode, struct file *file)
{
struct rio_usb_data *rio = &rio_instance;
rio->isopen = 0;
dev_info(&rio->rio_dev->dev, "Rio closed.\n");
return 0;
}
static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
{
struct RioCommand rio_cmd;
struct rio_usb_data *rio = &rio_instance;
void __user *data;
unsigned char *buffer;
int result, requesttype;
int retries;
int retval=0;
mutex_lock(&(rio->lock));
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
retval = -ENODEV;
goto err_out;
}
switch (cmd) {
case RIO_RECV_COMMAND:
data = (void __user *) arg;
if (data == NULL)
break;
if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
retval = -EFAULT;
goto err_out;
}
if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
retval = -EINVAL;
goto err_out;
}
buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
if (buffer == NULL) {
retval = -ENOMEM;
goto err_out;
}
if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
retval = -EFAULT;
free_page((unsigned long) buffer);
goto err_out;
}
requesttype = rio_cmd.requesttype | USB_DIR_IN |
USB_TYPE_VENDOR | USB_RECIP_DEVICE;
dev_dbg(&rio->rio_dev->dev,
"sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
requesttype, rio_cmd.request, rio_cmd.value,
rio_cmd.index, rio_cmd.length);
/* Send rio control message */
retries = 3;
while (retries) {
result = usb_control_msg(rio->rio_dev,
usb_rcvctrlpipe(rio-> rio_dev, 0),
rio_cmd.request,
requesttype,
rio_cmd.value,
rio_cmd.index, buffer,
rio_cmd.length,
jiffies_to_msecs(rio_cmd.timeout));
if (result == -ETIMEDOUT)
retries--;
else if (result < 0) {
dev_err(&rio->rio_dev->dev,
"Error executing ioctrl. code = %d\n",
result);
retries = 0;
} else {
dev_dbg(&rio->rio_dev->dev,
"Executed ioctl. Result = %d (data=%02x)\n",
result, buffer[0]);
if (copy_to_user(rio_cmd.buffer, buffer,
rio_cmd.length)) {
free_page((unsigned long) buffer);
retval = -EFAULT;
goto err_out;
}
retries = 0;
}
/* rio_cmd.buffer contains a raw stream of single byte
data which has been returned from rio. Data is
interpreted at application level. For data that
will be cast to data types longer than 1 byte, data
will be little_endian and will potentially need to
be swapped at the app level */
}
free_page((unsigned long) buffer);
break;
case RIO_SEND_COMMAND:
data = (void __user *) arg;
if (data == NULL)
break;
if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
retval = -EFAULT;
goto err_out;
}
if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
retval = -EINVAL;
goto err_out;
}
buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
if (buffer == NULL) {
retval = -ENOMEM;
goto err_out;
}
if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
free_page((unsigned long)buffer);
retval = -EFAULT;
goto err_out;
}
requesttype = rio_cmd.requesttype | USB_DIR_OUT |
USB_TYPE_VENDOR | USB_RECIP_DEVICE;
dev_dbg(&rio->rio_dev->dev,
"sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
requesttype, rio_cmd.request, rio_cmd.value,
rio_cmd.index, rio_cmd.length);
/* Send rio control message */
retries = 3;
while (retries) {
result = usb_control_msg(rio->rio_dev,
usb_sndctrlpipe(rio-> rio_dev, 0),
rio_cmd.request,
requesttype,
rio_cmd.value,
rio_cmd.index, buffer,
rio_cmd.length,
jiffies_to_msecs(rio_cmd.timeout));
if (result == -ETIMEDOUT)
retries--;
else if (result < 0) {
dev_err(&rio->rio_dev->dev,
"Error executing ioctrl. code = %d\n",
result);
retries = 0;
} else {
dev_dbg(&rio->rio_dev->dev,
"Executed ioctl. Result = %d\n", result);
retries = 0;
}
}
free_page((unsigned long) buffer);
break;
default:
retval = -ENOTTY;
break;
}
err_out:
mutex_unlock(&(rio->lock));
return retval;
}
static ssize_t
write_rio(struct file *file, const char __user *buffer,
size_t count, loff_t * ppos)
{
DEFINE_WAIT(wait);
struct rio_usb_data *rio = &rio_instance;
unsigned long copy_size;
unsigned long bytes_written = 0;
unsigned int partial;
int result = 0;
int maxretry;
int errn = 0;
int intr;
intr = mutex_lock_interruptible(&(rio->lock));
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&(rio->lock));
return -ENODEV;
}
do {
unsigned long thistime;
char *obuf = rio->obuf;
thistime = copy_size =
(count >= OBUF_SIZE) ? OBUF_SIZE : count;
if (copy_from_user(rio->obuf, buffer, copy_size)) {
errn = -EFAULT;
goto error;
}
maxretry = 5;
while (thistime) {
if (!rio->rio_dev) {
errn = -ENODEV;
goto error;
}
if (signal_pending(current)) {
mutex_unlock(&(rio->lock));
return bytes_written ? bytes_written : -EINTR;
}
result = usb_bulk_msg(rio->rio_dev,
usb_sndbulkpipe(rio->rio_dev, 2),
obuf, thistime, &partial, 5000);
dev_dbg(&rio->rio_dev->dev,
"write stats: result:%d thistime:%lu partial:%u\n",
result, thistime, partial);
if (result == -ETIMEDOUT) { /* NAK - so hold for a while */
if (!maxretry--) {
errn = -ETIME;
goto error;
}
prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
schedule_timeout(NAK_TIMEOUT);
finish_wait(&rio->wait_q, &wait);
continue;
} else if (!result && partial) {
obuf += partial;
thistime -= partial;
} else
break;
}
if (result) {
dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
result);
errn = -EIO;
goto error;
}
bytes_written += copy_size;
count -= copy_size;
buffer += copy_size;
} while (count > 0);
mutex_unlock(&(rio->lock));
return bytes_written ? bytes_written : -EIO;
error:
mutex_unlock(&(rio->lock));
return errn;
}
static ssize_t
read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
{
DEFINE_WAIT(wait);
struct rio_usb_data *rio = &rio_instance;
ssize_t read_count;
unsigned int partial;
int this_read;
int result;
int maxretry = 10;
char *ibuf;
int intr;
intr = mutex_lock_interruptible(&(rio->lock));
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&(rio->lock));
return -ENODEV;
}
ibuf = rio->ibuf;
read_count = 0;
while (count > 0) {
if (signal_pending(current)) {
mutex_unlock(&(rio->lock));
return read_count ? read_count : -EINTR;
}
if (!rio->rio_dev) {
mutex_unlock(&(rio->lock));
return -ENODEV;
}
this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
result = usb_bulk_msg(rio->rio_dev,
usb_rcvbulkpipe(rio->rio_dev, 1),
ibuf, this_read, &partial,
8000);
dev_dbg(&rio->rio_dev->dev,
"read stats: result:%d this_read:%u partial:%u\n",
result, this_read, partial);
if (partial) {
count = this_read = partial;
} else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
if (!maxretry--) {
mutex_unlock(&(rio->lock));
dev_err(&rio->rio_dev->dev,
"read_rio: maxretry timeout\n");
return -ETIME;
}
prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
schedule_timeout(NAK_TIMEOUT);
finish_wait(&rio->wait_q, &wait);
continue;
} else if (result != -EREMOTEIO) {
mutex_unlock(&(rio->lock));
dev_err(&rio->rio_dev->dev,
"Read Whoops - result:%d partial:%u this_read:%u\n",
result, partial, this_read);
return -EIO;
} else {
mutex_unlock(&(rio->lock));
return (0);
}
if (this_read) {
if (copy_to_user(buffer, ibuf, this_read)) {
mutex_unlock(&(rio->lock));
return -EFAULT;
}
count -= this_read;
read_count += this_read;
buffer += this_read;
}
}
mutex_unlock(&(rio->lock));
return read_count;
}
static const struct file_operations usb_rio_fops = {
.owner = THIS_MODULE,
.read = read_rio,
.write = write_rio,
.unlocked_ioctl = ioctl_rio,
.open = open_rio,
.release = close_rio,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = noop_llseek,
};
static struct usb_class_driver usb_rio_class = {
.name = "rio500%d",
.fops = &usb_rio_fops,
.minor_base = RIO_MINOR,
};
static int probe_rio(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct rio_usb_data *rio = &rio_instance;
int retval;
dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
retval = usb_register_dev(intf, &usb_rio_class);
if (retval) {
dev_err(&dev->dev,
"Not able to get a minor for this device.\n");
return -ENOMEM;
}
rio->rio_dev = dev;
if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
dev_err(&dev->dev,
"probe_rio: Not enough memory for the output buffer\n");
usb_deregister_dev(intf, &usb_rio_class);
return -ENOMEM;
}
dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
dev_err(&dev->dev,
"probe_rio: Not enough memory for the input buffer\n");
usb_deregister_dev(intf, &usb_rio_class);
kfree(rio->obuf);
return -ENOMEM;
}
dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
mutex_init(&(rio->lock));
usb_set_intfdata (intf, rio);
rio->present = 1;
return 0;
}
static void disconnect_rio(struct usb_interface *intf)
{
struct rio_usb_data *rio = usb_get_intfdata (intf);
usb_set_intfdata (intf, NULL);
mutex_lock(&rio500_mutex);
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
mutex_lock(&(rio->lock));
if (rio->isopen) {
rio->isopen = 0;
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return;
}
kfree(rio->ibuf);
kfree(rio->obuf);
dev_info(&intf->dev, "USB Rio disconnected.\n");
rio->present = 0;
mutex_unlock(&(rio->lock));
}
mutex_unlock(&rio500_mutex);
}
static const struct usb_device_id rio_table[] = {
{ USB_DEVICE(0x0841, 1) }, /* Rio 500 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, rio_table);
static struct usb_driver rio_driver = {
.name = "rio500",
.probe = probe_rio,
.disconnect = disconnect_rio,
.id_table = rio_table,
};
module_usb_driver(rio_driver);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");