linux/arch/alpha/kernel/irq_i8259.c

168 lines
3.9 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/irq_i8259.c
*
* This is the 'legacy' 8259A Programmable Interrupt Controller,
* present in the majority of PC/AT boxes.
*
* Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
*/
#include <linux/init.h>
#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include "proto.h"
#include "irq_impl.h"
/* Note mask bit is true for DISABLED irqs. */
static unsigned int cached_irq_mask = 0xffff;
static DEFINE_SPINLOCK(i8259_irq_lock);
static inline void
i8259_update_irq_hw(unsigned int irq, unsigned long mask)
{
int port = 0x21;
if (irq & 8) mask >>= 8;
if (irq & 8) port = 0xA1;
outb(mask, port);
}
inline void
i8259a_enable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
spin_unlock(&i8259_irq_lock);
}
static inline void
__i8259a_disable_irq(unsigned int irq)
{
i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
}
void
i8259a_disable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(d->irq);
spin_unlock(&i8259_irq_lock);
}
void
i8259a_mask_and_ack_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
/* Ack the interrupt making it the lowest priority. */
if (irq >= 8) {
outb(0xE0 | (irq - 8), 0xa0); /* ack the slave */
irq = 2;
}
outb(0xE0 | irq, 0x20); /* ack the master */
spin_unlock(&i8259_irq_lock);
}
struct irq_chip i8259a_irq_type = {
.name = "XT-PIC",
.irq_unmask = i8259a_enable_irq,
.irq_mask = i8259a_disable_irq,
.irq_mask_ack = i8259a_mask_and_ack_irq,
};
void __init
init_i8259a_irqs(void)
{
static struct irqaction cascade = {
.handler = no_action,
.name = "cascade",
};
long i;
outb(0xff, 0x21); /* mask all of 8259A-1 */
outb(0xff, 0xA1); /* mask all of 8259A-2 */
for (i = 0; i < 16; i++) {
irq_set_chip_and_handler(i, &i8259a_irq_type, handle_level_irq);
}
setup_irq(2, &cascade);
}
#if defined(CONFIG_ALPHA_GENERIC)
# define IACK_SC alpha_mv.iack_sc
#elif defined(CONFIG_ALPHA_APECS)
# define IACK_SC APECS_IACK_SC
#elif defined(CONFIG_ALPHA_LCA)
# define IACK_SC LCA_IACK_SC
#elif defined(CONFIG_ALPHA_CIA)
# define IACK_SC CIA_IACK_SC
#elif defined(CONFIG_ALPHA_PYXIS)
# define IACK_SC PYXIS_IACK_SC
#elif defined(CONFIG_ALPHA_TITAN)
# define IACK_SC TITAN_IACK_SC
#elif defined(CONFIG_ALPHA_TSUNAMI)
# define IACK_SC TSUNAMI_IACK_SC
#elif defined(CONFIG_ALPHA_IRONGATE)
# define IACK_SC IRONGATE_IACK_SC
#endif
/* Note that CONFIG_ALPHA_POLARIS is intentionally left out here, since
sys_rx164 wants to use isa_no_iack_sc_device_interrupt for some reason. */
#if defined(IACK_SC)
void
isa_device_interrupt(unsigned long vector)
{
/*
* Generate a PCI interrupt acknowledge cycle. The PIC will
* respond with the interrupt vector of the highest priority
* interrupt that is pending. The PALcode sets up the
* interrupts vectors such that irq level L generates vector L.
*/
int j = *(vuip) IACK_SC;
j &= 0xff;
handle_irq(j);
}
#endif
#if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC)
void
isa_no_iack_sc_device_interrupt(unsigned long vector)
{
unsigned long pic;
/*
* It seems to me that the probability of two or more *device*
* interrupts occurring at almost exactly the same time is
* pretty low. So why pay the price of checking for
* additional interrupts here if the common case can be
* handled so much easier?
*/
/*
* The first read of gives you *all* interrupting lines.
* Therefore, read the mask register and and out those lines
* not enabled. Note that some documentation has 21 and a1
* write only. This is not true.
*/
pic = inb(0x20) | (inb(0xA0) << 8); /* read isr */
pic &= 0xFFFB; /* mask out cascade & hibits */
while (pic) {
int j = ffz(~pic);
pic &= pic - 1;
handle_irq(j);
}
}
#endif