linux/drivers/infiniband/ulp/iser/iscsi_iser.c

1090 lines
30 KiB
C
Raw Normal View History

/*
* iSCSI Initiator over iSER Data-Path
*
* Copyright (C) 2004 Dmitry Yusupov
* Copyright (C) 2004 Alex Aizman
* Copyright (C) 2005 Mike Christie
* Copyright (c) 2005, 2006 Voltaire, Inc. All rights reserved.
* Copyright (c) 2013-2014 Mellanox Technologies. All rights reserved.
* maintained by openib-general@openib.org
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Credits:
* Christoph Hellwig
* FUJITA Tomonori
* Arne Redlich
* Zhenyu Wang
* Modified by:
* Erez Zilber
*/
#include <linux/types.h>
#include <linux/list.h>
#include <linux/hardirq.h>
#include <linux/kfifo.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/in.h>
#include <linux/net.h>
#include <linux/scatterlist.h>
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/module.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi.h>
#include <scsi/scsi_transport_iscsi.h>
#include "iscsi_iser.h"
MODULE_DESCRIPTION("iSER (iSCSI Extensions for RDMA) Datamover");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Alex Nezhinsky, Dan Bar Dov, Or Gerlitz");
MODULE_VERSION(DRV_VER);
static struct scsi_host_template iscsi_iser_sht;
static struct iscsi_transport iscsi_iser_transport;
static struct scsi_transport_template *iscsi_iser_scsi_transport;
static struct workqueue_struct *release_wq;
struct iser_global ig;
int iser_debug_level = 0;
module_param_named(debug_level, iser_debug_level, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0 (default:disabled)");
static unsigned int iscsi_max_lun = 512;
module_param_named(max_lun, iscsi_max_lun, uint, S_IRUGO);
MODULE_PARM_DESC(max_lun, "Max LUNs to allow per session (default:512");
bool iser_pi_enable = false;
module_param_named(pi_enable, iser_pi_enable, bool, S_IRUGO);
MODULE_PARM_DESC(pi_enable, "Enable T10-PI offload support (default:disabled)");
int iser_pi_guard;
module_param_named(pi_guard, iser_pi_guard, int, S_IRUGO);
MODULE_PARM_DESC(pi_guard, "T10-PI guard_type [deprecated]");
/*
* iscsi_iser_recv() - Process a successfull recv completion
* @conn: iscsi connection
* @hdr: iscsi header
* @rx_data: buffer containing receive data payload
* @rx_data_len: length of rx_data
*
* Notes: In case of data length errors or iscsi PDU completion failures
* this routine will signal iscsi layer of connection failure.
*/
void
iscsi_iser_recv(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
char *rx_data, int rx_data_len)
{
int rc = 0;
int datalen;
int ahslen;
/* verify PDU length */
datalen = ntoh24(hdr->dlength);
if (datalen > rx_data_len || (datalen + 4) < rx_data_len) {
iser_err("wrong datalen %d (hdr), %d (IB)\n",
datalen, rx_data_len);
rc = ISCSI_ERR_DATALEN;
goto error;
}
if (datalen != rx_data_len)
iser_dbg("aligned datalen (%d) hdr, %d (IB)\n",
datalen, rx_data_len);
/* read AHS */
ahslen = hdr->hlength * 4;
rc = iscsi_complete_pdu(conn, hdr, rx_data, rx_data_len);
if (rc && rc != ISCSI_ERR_NO_SCSI_CMD)
goto error;
return;
error:
iscsi_conn_failure(conn, rc);
}
/**
* iscsi_iser_pdu_alloc() - allocate an iscsi-iser PDU
* @task: iscsi task
* @opcode: iscsi command opcode
*
* Netes: This routine can't fail, just assign iscsi task
* hdr and max hdr size.
*/
static int
iscsi_iser_pdu_alloc(struct iscsi_task *task, uint8_t opcode)
{
struct iscsi_iser_task *iser_task = task->dd_data;
task->hdr = (struct iscsi_hdr *)&iser_task->desc.iscsi_header;
task->hdr_max = sizeof(iser_task->desc.iscsi_header);
return 0;
}
/**
* iser_initialize_task_headers() - Initialize task headers
* @task: iscsi task
* @tx_desc: iser tx descriptor
*
* Notes:
* This routine may race with iser teardown flow for scsi
* error handling TMFs. So for TMF we should acquire the
* state mutex to avoid dereferencing the IB device which
* may have already been terminated.
*/
int
iser_initialize_task_headers(struct iscsi_task *task,
struct iser_tx_desc *tx_desc)
{
struct iser_conn *iser_conn = task->conn->dd_data;
struct iser_device *device = iser_conn->ib_conn.device;
struct iscsi_iser_task *iser_task = task->dd_data;
u64 dma_addr;
const bool mgmt_task = !task->sc && !in_interrupt();
int ret = 0;
if (unlikely(mgmt_task))
mutex_lock(&iser_conn->state_mutex);
if (unlikely(iser_conn->state != ISER_CONN_UP)) {
ret = -ENODEV;
goto out;
}
dma_addr = ib_dma_map_single(device->ib_device, (void *)tx_desc,
ISER_HEADERS_LEN, DMA_TO_DEVICE);
if (ib_dma_mapping_error(device->ib_device, dma_addr)) {
ret = -ENOMEM;
goto out;
}
tx_desc->dma_addr = dma_addr;
tx_desc->tx_sg[0].addr = tx_desc->dma_addr;
tx_desc->tx_sg[0].length = ISER_HEADERS_LEN;
tx_desc->tx_sg[0].lkey = device->mr->lkey;
iser_task->iser_conn = iser_conn;
out:
if (unlikely(mgmt_task))
mutex_unlock(&iser_conn->state_mutex);
return ret;
}
/**
* iscsi_iser_task_init() - Initialize iscsi-iser task
* @task: iscsi task
*
* Initialize the task for the scsi command or mgmt command.
*
* Return: Returns zero on success or -ENOMEM when failing
* to init task headers (dma mapping error).
*/
static int
iscsi_iser_task_init(struct iscsi_task *task)
{
struct iscsi_iser_task *iser_task = task->dd_data;
int ret;
ret = iser_initialize_task_headers(task, &iser_task->desc);
if (ret) {
iser_err("Failed to init task %p, err = %d\n",
iser_task, ret);
return ret;
}
/* mgmt task */
if (!task->sc)
return 0;
iser_task->command_sent = 0;
iser_task_rdma_init(iser_task);
iser_task->sc = task->sc;
return 0;
}
/**
* iscsi_iser_mtask_xmit() - xmit management (immediate) task
* @conn: iscsi connection
* @task: task management task
*
* Notes:
* The function can return -EAGAIN in which case caller must
* call it again later, or recover. '0' return code means successful
* xmit.
*
**/
static int
iscsi_iser_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task)
{
int error = 0;
iser_dbg("mtask xmit [cid %d itt 0x%x]\n", conn->id, task->itt);
error = iser_send_control(conn, task);
/* since iser xmits control with zero copy, tasks can not be recycled
* right after sending them.
* The recycling scheme is based on whether a response is expected
* - if yes, the task is recycled at iscsi_complete_pdu
* - if no, the task is recycled at iser_snd_completion
*/
return error;
}
static int
iscsi_iser_task_xmit_unsol_data(struct iscsi_conn *conn,
struct iscsi_task *task)
{
struct iscsi_r2t_info *r2t = &task->unsol_r2t;
struct iscsi_data hdr;
int error = 0;
/* Send data-out PDUs while there's still unsolicited data to send */
while (iscsi_task_has_unsol_data(task)) {
iscsi_prep_data_out_pdu(task, r2t, &hdr);
iser_dbg("Sending data-out: itt 0x%x, data count %d\n",
hdr.itt, r2t->data_count);
/* the buffer description has been passed with the command */
/* Send the command */
error = iser_send_data_out(conn, task, &hdr);
if (error) {
r2t->datasn--;
goto iscsi_iser_task_xmit_unsol_data_exit;
}
r2t->sent += r2t->data_count;
iser_dbg("Need to send %d more as data-out PDUs\n",
r2t->data_length - r2t->sent);
}
iscsi_iser_task_xmit_unsol_data_exit:
return error;
}
/**
* iscsi_iser_task_xmit() - xmit iscsi-iser task
* @task: iscsi task
*
* Return: zero on success or escalates $error on failure.
*/
static int
iscsi_iser_task_xmit(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
struct iscsi_iser_task *iser_task = task->dd_data;
int error = 0;
if (!task->sc)
return iscsi_iser_mtask_xmit(conn, task);
if (task->sc->sc_data_direction == DMA_TO_DEVICE) {
BUG_ON(scsi_bufflen(task->sc) == 0);
iser_dbg("cmd [itt %x total %d imm %d unsol_data %d\n",
task->itt, scsi_bufflen(task->sc),
task->imm_count, task->unsol_r2t.data_length);
}
iser_dbg("ctask xmit [cid %d itt 0x%x]\n",
conn->id, task->itt);
/* Send the cmd PDU */
if (!iser_task->command_sent) {
error = iser_send_command(conn, task);
if (error)
goto iscsi_iser_task_xmit_exit;
iser_task->command_sent = 1;
}
/* Send unsolicited data-out PDU(s) if necessary */
if (iscsi_task_has_unsol_data(task))
error = iscsi_iser_task_xmit_unsol_data(conn, task);
iscsi_iser_task_xmit_exit:
return error;
}
/**
* iscsi_iser_cleanup_task() - cleanup an iscsi-iser task
* @task: iscsi task
*
* Notes: In case the RDMA device is already NULL (might have
* been removed in DEVICE_REMOVAL CM event it will bail-out
* without doing dma unmapping.
*/
static void iscsi_iser_cleanup_task(struct iscsi_task *task)
{
struct iscsi_iser_task *iser_task = task->dd_data;
struct iser_tx_desc *tx_desc = &iser_task->desc;
struct iser_conn *iser_conn = task->conn->dd_data;
struct iser_device *device = iser_conn->ib_conn.device;
/* DEVICE_REMOVAL event might have already released the device */
if (!device)
return;
ib_dma_unmap_single(device->ib_device,
tx_desc->dma_addr, ISER_HEADERS_LEN, DMA_TO_DEVICE);
/* mgmt tasks do not need special cleanup */
if (!task->sc)
return;
if (iser_task->status == ISER_TASK_STATUS_STARTED) {
iser_task->status = ISER_TASK_STATUS_COMPLETED;
iser_task_rdma_finalize(iser_task);
}
}
/**
* iscsi_iser_check_protection() - check protection information status of task.
* @task: iscsi task
* @sector: error sector if exsists (output)
*
* Return: zero if no data-integrity errors have occured
* 0x1: data-integrity error occured in the guard-block
* 0x2: data-integrity error occured in the reference tag
* 0x3: data-integrity error occured in the application tag
*
* In addition the error sector is marked.
*/
static u8
iscsi_iser_check_protection(struct iscsi_task *task, sector_t *sector)
{
struct iscsi_iser_task *iser_task = task->dd_data;
if (iser_task->dir[ISER_DIR_IN])
return iser_check_task_pi_status(iser_task, ISER_DIR_IN,
sector);
else
return iser_check_task_pi_status(iser_task, ISER_DIR_OUT,
sector);
}
/**
* iscsi_iser_conn_create() - create a new iscsi-iser connection
* @cls_session: iscsi class connection
* @conn_idx: connection index within the session (for MCS)
*
* Return: iscsi_cls_conn when iscsi_conn_setup succeeds or NULL
* otherwise.
*/
static struct iscsi_cls_conn *
iscsi_iser_conn_create(struct iscsi_cls_session *cls_session,
uint32_t conn_idx)
{
struct iscsi_conn *conn;
struct iscsi_cls_conn *cls_conn;
cls_conn = iscsi_conn_setup(cls_session, 0, conn_idx);
if (!cls_conn)
return NULL;
conn = cls_conn->dd_data;
/*
* due to issues with the login code re iser sematics
* this not set in iscsi_conn_setup - FIXME
*/
conn->max_recv_dlength = ISER_RECV_DATA_SEG_LEN;
return cls_conn;
}
/**
* iscsi_iser_conn_bind() - bind iscsi and iser connection structures
* @cls_session: iscsi class session
* @cls_conn: iscsi class connection
* @transport_eph: transport end-point handle
* @is_leading: indicate if this is the session leading connection (MCS)
*
* Return: zero on success, $error if iscsi_conn_bind fails and
* -EINVAL in case end-point doesn't exsits anymore or iser connection
* state is not UP (teardown already started).
*/
static int
iscsi_iser_conn_bind(struct iscsi_cls_session *cls_session,
struct iscsi_cls_conn *cls_conn,
uint64_t transport_eph,
int is_leading)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iser_conn *iser_conn;
struct iscsi_endpoint *ep;
int error;
error = iscsi_conn_bind(cls_session, cls_conn, is_leading);
if (error)
return error;
/* the transport ep handle comes from user space so it must be
* verified against the global ib connections list */
ep = iscsi_lookup_endpoint(transport_eph);
if (!ep) {
iser_err("can't bind eph %llx\n",
(unsigned long long)transport_eph);
return -EINVAL;
}
iser_conn = ep->dd_data;
mutex_lock(&iser_conn->state_mutex);
if (iser_conn->state != ISER_CONN_UP) {
error = -EINVAL;
iser_err("iser_conn %p state is %d, teardown started\n",
iser_conn, iser_conn->state);
goto out;
}
error = iser_alloc_rx_descriptors(iser_conn, conn->session);
if (error)
goto out;
/* binds the iSER connection retrieved from the previously
* connected ep_handle to the iSCSI layer connection. exchanges
* connection pointers */
iser_info("binding iscsi conn %p to iser_conn %p\n", conn, iser_conn);
conn->dd_data = iser_conn;
iser_conn->iscsi_conn = conn;
out:
mutex_unlock(&iser_conn->state_mutex);
return error;
}
/**
* iscsi_iser_conn_start() - start iscsi-iser connection
* @cls_conn: iscsi class connection
*
* Notes: Here iser intialize (or re-initialize) stop_completion as
* from this point iscsi must call conn_stop in session/connection
* teardown so iser transport must wait for it.
*/
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
static int
iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *iscsi_conn;
struct iser_conn *iser_conn;
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
iscsi_conn = cls_conn->dd_data;
iser_conn = iscsi_conn->dd_data;
reinit_completion(&iser_conn->stop_completion);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
return iscsi_conn_start(cls_conn);
}
/**
* iscsi_iser_conn_stop() - stop iscsi-iser connection
* @cls_conn: iscsi class connection
* @flag: indicate if recover or terminate (passed as is)
*
* Notes: Calling iscsi_conn_stop might theoretically race with
* DEVICE_REMOVAL event and dereference a previously freed RDMA device
* handle, so we call it under iser the state lock to protect against
* this kind of race.
*/
static void
iscsi_iser_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iser_conn *iser_conn = conn->dd_data;
iser_info("stopping iscsi_conn: %p, iser_conn: %p\n", conn, iser_conn);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
/*
* Userspace may have goofed up and not bound the connection or
* might have only partially setup the connection.
*/
if (iser_conn) {
mutex_lock(&iser_conn->state_mutex);
iser_conn_terminate(iser_conn);
iscsi_conn_stop(cls_conn, flag);
/* unbind */
iser_conn->iscsi_conn = NULL;
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
conn->dd_data = NULL;
complete(&iser_conn->stop_completion);
mutex_unlock(&iser_conn->state_mutex);
} else {
iscsi_conn_stop(cls_conn, flag);
}
}
/**
* iscsi_iser_session_destroy() - destroy iscsi-iser session
* @cls_session: iscsi class session
*
* Removes and free iscsi host.
*/
static void
iscsi_iser_session_destroy(struct iscsi_cls_session *cls_session)
{
struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
iscsi_session_teardown(cls_session);
iscsi_host_remove(shost);
iscsi_host_free(shost);
}
static inline unsigned int
iser_dif_prot_caps(int prot_caps)
{
return ((prot_caps & IB_PROT_T10DIF_TYPE_1) ?
SHOST_DIF_TYPE1_PROTECTION | SHOST_DIX_TYPE0_PROTECTION |
SHOST_DIX_TYPE1_PROTECTION : 0) |
((prot_caps & IB_PROT_T10DIF_TYPE_2) ?
SHOST_DIF_TYPE2_PROTECTION | SHOST_DIX_TYPE2_PROTECTION : 0) |
((prot_caps & IB_PROT_T10DIF_TYPE_3) ?
SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE3_PROTECTION : 0);
}
/**
* iscsi_iser_session_create() - create an iscsi-iser session
* @ep: iscsi end-point handle
* @cmds_max: maximum commands in this session
* @qdepth: session command queue depth
* @initial_cmdsn: initiator command sequnce number
*
* Allocates and adds a scsi host, expose DIF supprot if
* exists, and sets up an iscsi session.
*/
static struct iscsi_cls_session *
iscsi_iser_session_create(struct iscsi_endpoint *ep,
uint16_t cmds_max, uint16_t qdepth,
uint32_t initial_cmdsn)
{
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct Scsi_Host *shost;
struct iser_conn *iser_conn = NULL;
struct ib_conn *ib_conn;
u16 max_cmds;
shost = iscsi_host_alloc(&iscsi_iser_sht, 0, 0);
if (!shost)
return NULL;
shost->transportt = iscsi_iser_scsi_transport;
shost->cmd_per_lun = qdepth;
shost->max_lun = iscsi_max_lun;
shost->max_id = 0;
shost->max_channel = 0;
shost->max_cmd_len = 16;
/*
* older userspace tools (before 2.0-870) did not pass us
* the leading conn's ep so this will be NULL;
*/
if (ep) {
iser_conn = ep->dd_data;
max_cmds = iser_conn->max_cmds;
mutex_lock(&iser_conn->state_mutex);
if (iser_conn->state != ISER_CONN_UP) {
iser_err("iser conn %p already started teardown\n",
iser_conn);
mutex_unlock(&iser_conn->state_mutex);
goto free_host;
}
ib_conn = &iser_conn->ib_conn;
if (ib_conn->pi_support) {
u32 sig_caps = ib_conn->device->dev_attr.sig_prot_cap;
scsi_host_set_prot(shost, iser_dif_prot_caps(sig_caps));
scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP |
SHOST_DIX_GUARD_CRC);
}
/*
* Limit the sg_tablesize and max_sectors based on the device
* max fastreg page list length.
*/
shost->sg_tablesize = min_t(unsigned short, shost->sg_tablesize,
ib_conn->device->dev_attr.max_fast_reg_page_list_len);
shost->max_sectors = min_t(unsigned int,
1024, (shost->sg_tablesize * PAGE_SIZE) >> 9);
if (iscsi_host_add(shost,
ib_conn->device->ib_device->dma_device)) {
mutex_unlock(&iser_conn->state_mutex);
goto free_host;
}
mutex_unlock(&iser_conn->state_mutex);
} else {
max_cmds = ISER_DEF_XMIT_CMDS_MAX;
if (iscsi_host_add(shost, NULL))
goto free_host;
}
if (cmds_max > max_cmds) {
iser_info("cmds_max changed from %u to %u\n",
cmds_max, max_cmds);
cmds_max = max_cmds;
}
cls_session = iscsi_session_setup(&iscsi_iser_transport, shost,
cmds_max, 0,
sizeof(struct iscsi_iser_task),
initial_cmdsn, 0);
if (!cls_session)
goto remove_host;
session = cls_session->dd_data;
shost->can_queue = session->scsi_cmds_max;
return cls_session;
remove_host:
iscsi_host_remove(shost);
free_host:
iscsi_host_free(shost);
return NULL;
}
static int
iscsi_iser_set_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf, int buflen)
{
int value;
switch (param) {
case ISCSI_PARAM_MAX_RECV_DLENGTH:
/* TBD */
break;
case ISCSI_PARAM_HDRDGST_EN:
sscanf(buf, "%d", &value);
if (value) {
iser_err("DataDigest wasn't negotiated to None\n");
return -EPROTO;
}
break;
case ISCSI_PARAM_DATADGST_EN:
sscanf(buf, "%d", &value);
if (value) {
iser_err("DataDigest wasn't negotiated to None\n");
return -EPROTO;
}
break;
case ISCSI_PARAM_IFMARKER_EN:
sscanf(buf, "%d", &value);
if (value) {
iser_err("IFMarker wasn't negotiated to No\n");
return -EPROTO;
}
break;
case ISCSI_PARAM_OFMARKER_EN:
sscanf(buf, "%d", &value);
if (value) {
iser_err("OFMarker wasn't negotiated to No\n");
return -EPROTO;
}
break;
default:
return iscsi_set_param(cls_conn, param, buf, buflen);
}
return 0;
}
/**
* iscsi_iser_set_param() - set class connection parameter
* @cls_conn: iscsi class connection
* @stats: iscsi stats to output
*
* Output connection statistics.
*/
static void
iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats)
{
struct iscsi_conn *conn = cls_conn->dd_data;
stats->txdata_octets = conn->txdata_octets;
stats->rxdata_octets = conn->rxdata_octets;
stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
stats->dataout_pdus = conn->dataout_pdus_cnt;
stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
stats->datain_pdus = conn->datain_pdus_cnt; /* always 0 */
stats->r2t_pdus = conn->r2t_pdus_cnt; /* always 0 */
stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
stats->custom_length = 1;
strcpy(stats->custom[0].desc, "fmr_unalign_cnt");
stats->custom[0].value = conn->fmr_unalign_cnt;
}
static int iscsi_iser_get_ep_param(struct iscsi_endpoint *ep,
enum iscsi_param param, char *buf)
{
struct iser_conn *iser_conn = ep->dd_data;
int len;
switch (param) {
case ISCSI_PARAM_CONN_PORT:
case ISCSI_PARAM_CONN_ADDRESS:
if (!iser_conn || !iser_conn->ib_conn.cma_id)
return -ENOTCONN;
return iscsi_conn_get_addr_param((struct sockaddr_storage *)
&iser_conn->ib_conn.cma_id->route.addr.dst_addr,
param, buf);
break;
default:
return -ENOSYS;
}
return len;
}
/**
* iscsi_iser_ep_connect() - Initiate iSER connection establishment
* @shost: scsi_host
* @dst_addr: destination address
* @non-blocking: indicate if routine can block
*
* Allocate an iscsi endpoint, an iser_conn structure and bind them.
* After that start RDMA connection establishment via rdma_cm. We
* don't allocate iser_conn embedded in iscsi_endpoint since in teardown
* the endpoint will be destroyed at ep_disconnect while iser_conn will
* cleanup its resources asynchronuously.
*
* Return: iscsi_endpoint created by iscsi layer or ERR_PTR(error)
* if fails.
*/
static struct iscsi_endpoint *
iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
int non_blocking)
{
int err;
struct iser_conn *iser_conn;
struct iscsi_endpoint *ep;
ep = iscsi_create_endpoint(0);
if (!ep)
return ERR_PTR(-ENOMEM);
iser_conn = kzalloc(sizeof(*iser_conn), GFP_KERNEL);
if (!iser_conn) {
err = -ENOMEM;
goto failure;
}
ep->dd_data = iser_conn;
iser_conn->ep = ep;
iser_conn_init(iser_conn);
err = iser_connect(iser_conn, NULL, dst_addr, non_blocking);
if (err)
goto failure;
return ep;
failure:
iscsi_destroy_endpoint(ep);
return ERR_PTR(err);
}
/**
* iscsi_iser_ep_poll() - poll for iser connection establishment to complete
* @ep: iscsi endpoint (created at ep_connect)
* @timeout_ms: polling timeout allowed in ms.
*
* This routine boils down to waiting for up_completion signaling
* that cma_id got CONNECTED event.
*
* Return: 1 if succeeded in connection establishment, 0 if timeout expired
* (libiscsi will retry will kick in) or -1 if interrupted by signal
* or more likely iser connection state transitioned to TEMINATING or
* DOWN during the wait period.
*/
static int
iscsi_iser_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
{
struct iser_conn *iser_conn = ep->dd_data;
int rc;
rc = wait_for_completion_interruptible_timeout(&iser_conn->up_completion,
msecs_to_jiffies(timeout_ms));
/* if conn establishment failed, return error code to iscsi */
if (rc == 0) {
mutex_lock(&iser_conn->state_mutex);
if (iser_conn->state == ISER_CONN_TERMINATING ||
iser_conn->state == ISER_CONN_DOWN)
rc = -1;
mutex_unlock(&iser_conn->state_mutex);
}
iser_info("iser conn %p rc = %d\n", iser_conn, rc);
if (rc > 0)
return 1; /* success, this is the equivalent of POLLOUT */
else if (!rc)
return 0; /* timeout */
else
return rc; /* signal */
}
/**
* iscsi_iser_ep_disconnect() - Initiate connection teardown process
* @ep: iscsi endpoint handle
*
* This routine is not blocked by iser and RDMA termination process
* completion as we queue a deffered work for iser/RDMA destruction
* and cleanup or actually call it immediately in case we didn't pass
* iscsi conn bind/start stage, thus it is safe.
*/
static void
iscsi_iser_ep_disconnect(struct iscsi_endpoint *ep)
{
struct iser_conn *iser_conn = ep->dd_data;
iser_info("ep %p iser conn %p\n", ep, iser_conn);
mutex_lock(&iser_conn->state_mutex);
iser_conn_terminate(iser_conn);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
/*
* if iser_conn and iscsi_conn are bound, we must wait for
* iscsi_conn_stop and flush errors completion before freeing
* the iser resources. Otherwise we are safe to free resources
* immediately.
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
*/
if (iser_conn->iscsi_conn) {
INIT_WORK(&iser_conn->release_work, iser_release_work);
queue_work(release_wq, &iser_conn->release_work);
mutex_unlock(&iser_conn->state_mutex);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
} else {
iser_conn->state = ISER_CONN_DOWN;
mutex_unlock(&iser_conn->state_mutex);
iser_conn_release(iser_conn);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
}
iscsi_destroy_endpoint(ep);
}
static umode_t iser_attr_is_visible(int param_type, int param)
{
switch (param_type) {
case ISCSI_HOST_PARAM:
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
case ISCSI_HOST_PARAM_HWADDRESS:
case ISCSI_HOST_PARAM_INITIATOR_NAME:
return S_IRUGO;
default:
return 0;
}
case ISCSI_PARAM:
switch (param) {
case ISCSI_PARAM_MAX_RECV_DLENGTH:
case ISCSI_PARAM_MAX_XMIT_DLENGTH:
case ISCSI_PARAM_HDRDGST_EN:
case ISCSI_PARAM_DATADGST_EN:
case ISCSI_PARAM_CONN_ADDRESS:
case ISCSI_PARAM_CONN_PORT:
case ISCSI_PARAM_EXP_STATSN:
case ISCSI_PARAM_PERSISTENT_ADDRESS:
case ISCSI_PARAM_PERSISTENT_PORT:
case ISCSI_PARAM_PING_TMO:
case ISCSI_PARAM_RECV_TMO:
case ISCSI_PARAM_INITIAL_R2T_EN:
case ISCSI_PARAM_MAX_R2T:
case ISCSI_PARAM_IMM_DATA_EN:
case ISCSI_PARAM_FIRST_BURST:
case ISCSI_PARAM_MAX_BURST:
case ISCSI_PARAM_PDU_INORDER_EN:
case ISCSI_PARAM_DATASEQ_INORDER_EN:
case ISCSI_PARAM_TARGET_NAME:
case ISCSI_PARAM_TPGT:
case ISCSI_PARAM_USERNAME:
case ISCSI_PARAM_PASSWORD:
case ISCSI_PARAM_USERNAME_IN:
case ISCSI_PARAM_PASSWORD_IN:
case ISCSI_PARAM_FAST_ABORT:
case ISCSI_PARAM_ABORT_TMO:
case ISCSI_PARAM_LU_RESET_TMO:
case ISCSI_PARAM_TGT_RESET_TMO:
case ISCSI_PARAM_IFACE_NAME:
case ISCSI_PARAM_INITIATOR_NAME:
case ISCSI_PARAM_DISCOVERY_SESS:
return S_IRUGO;
default:
return 0;
}
}
return 0;
}
static struct scsi_host_template iscsi_iser_sht = {
.module = THIS_MODULE,
.name = "iSCSI Initiator over iSER",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = scsi_change_queue_depth,
.sg_tablesize = ISCSI_ISER_SG_TABLESIZE,
.max_sectors = 1024,
.cmd_per_lun = ISER_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler= iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_recover_target,
.target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "iscsi_iser",
.this_id = -1,
.track_queue_depth = 1,
};
static struct iscsi_transport iscsi_iser_transport = {
.owner = THIS_MODULE,
.name = "iser",
.caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_TEXT_NEGO,
/* session management */
.create_session = iscsi_iser_session_create,
.destroy_session = iscsi_iser_session_destroy,
/* connection management */
.create_conn = iscsi_iser_conn_create,
.bind_conn = iscsi_iser_conn_bind,
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
.destroy_conn = iscsi_conn_teardown,
.attr_is_visible = iser_attr_is_visible,
.set_param = iscsi_iser_set_param,
.get_conn_param = iscsi_conn_get_param,
.get_ep_param = iscsi_iser_get_ep_param,
.get_session_param = iscsi_session_get_param,
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
.start_conn = iscsi_iser_conn_start,
.stop_conn = iscsi_iser_conn_stop,
/* iscsi host params */
.get_host_param = iscsi_host_get_param,
.set_host_param = iscsi_host_set_param,
/* IO */
.send_pdu = iscsi_conn_send_pdu,
.get_stats = iscsi_iser_conn_get_stats,
.init_task = iscsi_iser_task_init,
.xmit_task = iscsi_iser_task_xmit,
.cleanup_task = iscsi_iser_cleanup_task,
.alloc_pdu = iscsi_iser_pdu_alloc,
.check_protection = iscsi_iser_check_protection,
/* recovery */
.session_recovery_timedout = iscsi_session_recovery_timedout,
.ep_connect = iscsi_iser_ep_connect,
.ep_poll = iscsi_iser_ep_poll,
.ep_disconnect = iscsi_iser_ep_disconnect
};
static int __init iser_init(void)
{
int err;
iser_dbg("Starting iSER datamover...\n");
if (iscsi_max_lun < 1) {
iser_err("Invalid max_lun value of %u\n", iscsi_max_lun);
return -EINVAL;
}
memset(&ig, 0, sizeof(struct iser_global));
ig.desc_cache = kmem_cache_create("iser_descriptors",
sizeof(struct iser_tx_desc),
0, SLAB_HWCACHE_ALIGN,
NULL);
if (ig.desc_cache == NULL)
return -ENOMEM;
/* device init is called only after the first addr resolution */
mutex_init(&ig.device_list_mutex);
INIT_LIST_HEAD(&ig.device_list);
mutex_init(&ig.connlist_mutex);
INIT_LIST_HEAD(&ig.connlist);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
release_wq = alloc_workqueue("release workqueue", 0, 0);
if (!release_wq) {
iser_err("failed to allocate release workqueue\n");
return -ENOMEM;
}
iscsi_iser_scsi_transport = iscsi_register_transport(
&iscsi_iser_transport);
if (!iscsi_iser_scsi_transport) {
iser_err("iscsi_register_transport failed\n");
err = -EINVAL;
goto register_transport_failure;
}
return 0;
register_transport_failure:
kmem_cache_destroy(ig.desc_cache);
return err;
}
static void __exit iser_exit(void)
{
struct iser_conn *iser_conn, *n;
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
int connlist_empty;
iser_dbg("Removing iSER datamover...\n");
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
destroy_workqueue(release_wq);
mutex_lock(&ig.connlist_mutex);
connlist_empty = list_empty(&ig.connlist);
mutex_unlock(&ig.connlist_mutex);
if (!connlist_empty) {
iser_err("Error cleanup stage completed but we still have iser "
"connections, destroying them anyway\n");
list_for_each_entry_safe(iser_conn, n, &ig.connlist,
conn_list) {
iser_conn_release(iser_conn);
IB/iser: Simplify connection management iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-22 16:00:18 +08:00
}
}
iscsi_unregister_transport(&iscsi_iser_transport);
kmem_cache_destroy(ig.desc_cache);
}
module_init(iser_init);
module_exit(iser_exit);