openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/clk/sunxi-ng/ccu-sun8i-h3.c

1177 lines
38 KiB
C
Raw Normal View History

clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
/*
* Copyright (c) 2016 Maxime Ripard. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu_phase.h"
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
#include "ccu_sdm.h"
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
#include "ccu-sun8i-h3.h"
static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
"osc24M", 0x000,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
16, 2, /* P */
BIT(31), /* gate */
BIT(28), /* lock */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
/*
* The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
* the base (2x, 4x and 8x), and one variable divider (the one true
* pll audio).
*
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
* With sigma-delta modulation for fractional-N on the audio PLL,
* we have to use specific dividers. This means the variable divider
* can no longer be used, as the audio codec requests the exact clock
* rates we support through this mechanism. So we now hard code the
* variable divider to 1. This means the clock rates will no longer
* match the clock names.
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
*/
#define SUN8I_H3_PLL_AUDIO_REG 0x008
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 },
{ .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 },
};
static SUNXI_CCU_NM_WITH_SDM_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
"osc24M", 0x008,
8, 7, /* N */
0, 5, /* M */
pll_audio_sdm_table, BIT(24),
0x284, BIT(31),
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
clk: sunxi-ng: h3/h5: Add max. rate constraint to pll-video As it turns out, pll-video can be set to higher rate that it is really supported by HW. For example, one monitor requested 185.58 MHz pixel clock. Clock framework calculated that minimum rate error would be when pll-video is set to 2040 MHz. This is clearly out of specs. Both H3 and H5 user manuals specify 600 MHz as maximum supported rate. However, BSP clock drivers allow up to 912 MHz and 1008 MHz respectively. Here 912 MHz is chosen because user manuals were already proven wrong once for lower limits. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-08-10 00:52:14 +08:00
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video_clk, "pll-video",
"osc24M", 0x0010,
192000000, /* Minimum rate */
912000000, /* Maximum rate */
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
"osc24M", 0x0018,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
"osc24M", 0x020,
8, 5, /* N */
4, 2, /* K */
0, 2, /* M */
BIT(31), /* gate */
BIT(28), /* lock */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
"osc24M", 0x028,
8, 5, /* N */
4, 2, /* K */
BIT(31), /* gate */
BIT(28), /* lock */
2, /* post-div */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
"osc24M", 0x0038,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
"osc24M", 0x044,
8, 5, /* N */
4, 2, /* K */
BIT(31), /* gate */
BIT(28), /* lock */
2, /* post-div */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
"osc24M", 0x0048,
8, 7, /* N */
0, 4, /* M */
BIT(24), /* frac enable */
BIT(25), /* frac select */
270000000, /* frac rate 0 */
297000000, /* frac rate 1 */
BIT(31), /* gate */
BIT(28), /* lock */
clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs The PLLs on H3 have a lock bit, which will only be set to 1 when the PLL is really working. Add CLK_SET_RATE_UNGATE to the PLLs, otherwise it will timeout when trying to set PLL clock frequency without enabling it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:05 +08:00
CLK_SET_RATE_UNGATE);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static const char * const cpux_parents[] = { "osc32k", "osc24M",
"pll-cpux" , "pll-cpux" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3 The CPUX clock, which is the main clock of the ARM core on Allwinner H3, can be adjusted by changing the frequency of the PLL_CPUX clock. Allowing setting parent clock for the CPUX clock, thus the PLL_CPUX clock can be adjusted when adjusting the CPUX clock. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-07-23 18:27:45 +08:00
0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
static const char * const ahb1_parents[] = { "osc32k", "osc24M",
"axi" , "pll-periph0" };
clk: sunxi-ng: Support multiple variable pre-dividers On the A83T, the AHB1 clock has a shared pre-divider on the two PLL-PERIPH clock parents. To support such instances of shared pre-dividers, this patch extends the mux clock type to support multiple variable pre-dividers. As the pre-dividers are only used to calculate the rate, but do not participate in the factorization process, this is fairly straightforward. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-19 15:06:08 +08:00
static const struct ccu_mux_var_prediv ahb1_predivs[] = {
{ .index = 3, .shift = 6, .width = 2 },
};
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = {
.shift = 12,
.width = 2,
clk: sunxi-ng: Support multiple variable pre-dividers On the A83T, the AHB1 clock has a shared pre-divider on the two PLL-PERIPH clock parents. To support such instances of shared pre-dividers, this patch extends the mux clock type to support multiple variable pre-dividers. As the pre-dividers are only used to calculate the rate, but do not participate in the factorization process, this is fairly straightforward. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-19 15:06:08 +08:00
.var_predivs = ahb1_predivs,
.n_var_predivs = ARRAY_SIZE(ahb1_predivs),
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
},
.common = {
.reg = 0x054,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb1",
ahb1_parents,
&ccu_div_ops,
0),
},
};
static struct clk_div_table apb1_div_table[] = {
{ .val = 0, .div = 2 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 8 },
{ /* Sentinel */ },
};
static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
0x054, 8, 2, apb1_div_table, 0);
static const char * const apb2_parents[] = { "osc32k", "osc24M",
"pll-periph0" , "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
0, 5, /* M */
16, 2, /* P */
24, 2, /* mux */
0);
static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents Some clocks on the A31 have fixed pre-dividers on multiple parents. Add support for them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-25 14:21:57 +08:00
static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
{ .index = 1, .div = 2 },
};
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static struct ccu_mux ahb2_clk = {
.mux = {
.shift = 0,
.width = 1,
clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents Some clocks on the A31 have fixed pre-dividers on multiple parents. Add support for them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-25 14:21:57 +08:00
.fixed_predivs = ahb2_fixed_predivs,
.n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
},
.common = {
.reg = 0x05c,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ahb2",
ahb2_parents,
&ccu_mux_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
0x060, BIT(5), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
0x060, BIT(6), 0);
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
0x060, BIT(8), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
0x060, BIT(9), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
0x060, BIT(10), 0);
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
0x060, BIT(13), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
0x060, BIT(14), 0);
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
0x060, BIT(17), 0);
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
0x060, BIT(18), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
0x060, BIT(19), 0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
0x060, BIT(20), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
0x060, BIT(21), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
0x060, BIT(23), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
0x060, BIT(24), 0);
static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
0x060, BIT(25), 0);
static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb2",
0x060, BIT(26), 0);
static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb2",
0x060, BIT(27), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
0x060, BIT(28), 0);
static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
0x060, BIT(29), 0);
static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb2",
0x060, BIT(30), 0);
static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb2",
0x060, BIT(31), 0);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
0x064, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
0x064, BIT(3), 0);
static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
0x064, BIT(4), 0);
static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
0x064, BIT(5), 0);
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
0x064, BIT(8), 0);
static SUNXI_CCU_GATE(bus_tve_clk, "bus-tve", "ahb1",
0x064, BIT(9), 0);
static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
0x064, BIT(11), 0);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
0x064, BIT(12), 0);
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
0x064, BIT(20), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
0x064, BIT(21), 0);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x064, BIT(22), 0);
static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
0x068, BIT(1), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
0x068, BIT(8), 0);
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
0x068, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
0x068, BIT(13), 0);
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
0x068, BIT(14), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
0x06c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
0x06c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
0x06c, BIT(16), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
0x06c, BIT(17), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
0x06c, BIT(18), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
0x06c, BIT(19), 0);
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2",
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
0x06c, BIT(20), 0);
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2",
0x06c, BIT(21), 0);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1",
0x070, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
0x070, BIT(7), 0);
static struct clk_div_table ths_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 4 },
{ .val = 3, .div = 6 },
};
static SUNXI_CCU_DIV_TABLE_WITH_GATE(ths_clk, "ths", "osc24M",
0x074, 0, 2, ths_div_table, BIT(31), 0);
static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
"pll-periph1" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
0x088, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
0x088, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
0x08c, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
0x08c, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
0x090, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
0x090, 8, 3, 0);
static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mod0_default_parents, 0x09c,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
0, 4, /* M */
16, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
0);
static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
"pll-audio-2x", "pll-audio" };
static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks The audio module clocks are supposed to be set according to the sample rate of the audio stream. The audio PLL provides the clock signal for these module clocks, and only it is freely tunable. Set CLK_SET_RATE_PARENT for the audio module clocks so their users can properly tune the clock rate. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-11 18:05:58 +08:00
0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks The audio module clocks are supposed to be set according to the sample rate of the audio stream. The audio PLL provides the clock signal for these module clocks, and only it is freely tunable. Set CLK_SET_RATE_PARENT for the audio module clocks so their users can properly tune the clock rate. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-11 18:05:58 +08:00
0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks The audio module clocks are supposed to be set according to the sample rate of the audio stream. The audio PLL provides the clock signal for these module clocks, and only it is freely tunable. Set CLK_SET_RATE_PARENT for the audio module clocks so their users can properly tune the clock rate. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-11 18:05:58 +08:00
0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks The audio module clocks are supposed to be set according to the sample rate of the audio stream. The audio PLL provides the clock signal for these module clocks, and only it is freely tunable. Set CLK_SET_RATE_PARENT for the audio module clocks so their users can properly tune the clock rate. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-11 18:05:58 +08:00
0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
0x0cc, BIT(9), 0);
static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M",
0x0cc, BIT(10), 0);
static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M",
0x0cc, BIT(11), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
0x0cc, BIT(16), 0);
static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc24M",
0x0cc, BIT(17), 0);
static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M",
0x0cc, BIT(18), 0);
static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc24M",
0x0cc, BIT(19), 0);
static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
0x100, BIT(0), 0);
static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
0x100, BIT(1), 0);
static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
0x100, BIT(2), 0);
static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
0x100, BIT(3), 0);
static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate Some units have to be able to set it's own clock precisely to work correctly. Allow them to do so by adding CLK_SET_RATE_PARENT flag. Add this flag to DE, TCON and HDMI clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-02 05:34:29 +08:00
0x104, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static const char * const tcon_parents[] = { "pll-video" };
static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate Some units have to be able to set it's own clock precisely to work correctly. Allow them to do so by adding CLK_SET_RATE_PARENT flag. Add this flag to DE, TCON and HDMI clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-02 05:34:29 +08:00
0x118, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
0x120, 0, 4, 24, 3, BIT(31), 0);
static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
0x124, 0, 4, 24, 3, BIT(31), 0);
static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
0x130, BIT(31), 0);
static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
0x134, 16, 4, 24, 3, BIT(31), 0);
clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent The third parent of CSI_MCLK is PLL_PERIPH1, not PLL_PERIPH0. Fix it. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-30 13:33:28 +08:00
static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph1" };
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
0x134, 0, 5, 8, 3, BIT(15), 0);
static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
0x13c, 16, 3, BIT(31), 0);
static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks The audio module clocks are supposed to be set according to the sample rate of the audio stream. The audio PLL provides the clock signal for these module clocks, and only it is freely tunable. Set CLK_SET_RATE_PARENT for the audio module clocks so their users can properly tune the clock rate. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-11 18:05:58 +08:00
0x140, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
0x144, BIT(31), 0);
static const char * const hdmi_parents[] = { "pll-video" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate Some units have to be able to set it's own clock precisely to work correctly. Allow them to do so by adding CLK_SET_RATE_PARENT flag. Add this flag to DE, TCON and HDMI clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-02 05:34:29 +08:00
0x150, 0, 4, 24, 2, BIT(31),
CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
0x154, BIT(31), 0);
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
clk: sunxi-ng: add CLK_SET_RATE_PARENT flag to H3 GPU clock The GPU clock on H3 has only one parent, PLL-GPU, and the PLL is only the parent of the GPU clock. The GPU clock can be tweaked by tweaking the PLL-GPU clock. Add CLK_SET_RATE_PARENT flag to allow tweaking the GPU clock via tweaking PLL-CPU. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-10 20:40:06 +08:00
0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static struct ccu_common *sun8i_h3_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_audio_base_clk.common,
&pll_video_clk.common,
&pll_ve_clk.common,
&pll_ddr_clk.common,
&pll_periph0_clk.common,
&pll_gpu_clk.common,
&pll_periph1_clk.common,
&pll_de_clk.common,
&cpux_clk.common,
&axi_clk.common,
&ahb1_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&ahb2_clk.common,
&bus_ce_clk.common,
&bus_dma_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_nand_clk.common,
&bus_dram_clk.common,
&bus_emac_clk.common,
&bus_ts_clk.common,
&bus_hstimer_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_otg_clk.common,
&bus_ehci0_clk.common,
&bus_ehci1_clk.common,
&bus_ehci2_clk.common,
&bus_ehci3_clk.common,
&bus_ohci0_clk.common,
&bus_ohci1_clk.common,
&bus_ohci2_clk.common,
&bus_ohci3_clk.common,
&bus_ve_clk.common,
&bus_tcon0_clk.common,
&bus_tcon1_clk.common,
&bus_deinterlace_clk.common,
&bus_csi_clk.common,
&bus_tve_clk.common,
&bus_hdmi_clk.common,
&bus_de_clk.common,
&bus_gpu_clk.common,
&bus_msgbox_clk.common,
&bus_spinlock_clk.common,
&bus_codec_clk.common,
&bus_spdif_clk.common,
&bus_pio_clk.common,
&bus_ths_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_i2s2_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
&bus_scr0_clk.common,
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
&bus_ephy_clk.common,
&bus_dbg_clk.common,
&ths_clk.common,
&nand_clk.common,
&mmc0_clk.common,
&mmc0_sample_clk.common,
&mmc0_output_clk.common,
&mmc1_clk.common,
&mmc1_sample_clk.common,
&mmc1_output_clk.common,
&mmc2_clk.common,
&mmc2_sample_clk.common,
&mmc2_output_clk.common,
&ts_clk.common,
&ce_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&i2s2_clk.common,
&spdif_clk.common,
&usb_phy0_clk.common,
&usb_phy1_clk.common,
&usb_phy2_clk.common,
&usb_phy3_clk.common,
&usb_ohci0_clk.common,
&usb_ohci1_clk.common,
&usb_ohci2_clk.common,
&usb_ohci3_clk.common,
&dram_clk.common,
&dram_ve_clk.common,
&dram_csi_clk.common,
&dram_deinterlace_clk.common,
&dram_ts_clk.common,
&de_clk.common,
&tcon_clk.common,
&tve_clk.common,
&deinterlace_clk.common,
&csi_misc_clk.common,
&csi_sclk_clk.common,
&csi_mclk_clk.common,
&ve_clk.common,
&ac_dig_clk.common,
&avs_clk.common,
&hdmi_clk.common,
&hdmi_ddc_clk.common,
&mbus_clk.common,
&gpu_clk.common,
};
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static struct ccu_common *sun50i_h5_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_audio_base_clk.common,
&pll_video_clk.common,
&pll_ve_clk.common,
&pll_ddr_clk.common,
&pll_periph0_clk.common,
&pll_gpu_clk.common,
&pll_periph1_clk.common,
&pll_de_clk.common,
&cpux_clk.common,
&axi_clk.common,
&ahb1_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&ahb2_clk.common,
&bus_ce_clk.common,
&bus_dma_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_nand_clk.common,
&bus_dram_clk.common,
&bus_emac_clk.common,
&bus_ts_clk.common,
&bus_hstimer_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_otg_clk.common,
&bus_ehci0_clk.common,
&bus_ehci1_clk.common,
&bus_ehci2_clk.common,
&bus_ehci3_clk.common,
&bus_ohci0_clk.common,
&bus_ohci1_clk.common,
&bus_ohci2_clk.common,
&bus_ohci3_clk.common,
&bus_ve_clk.common,
&bus_tcon0_clk.common,
&bus_tcon1_clk.common,
&bus_deinterlace_clk.common,
&bus_csi_clk.common,
&bus_tve_clk.common,
&bus_hdmi_clk.common,
&bus_de_clk.common,
&bus_gpu_clk.common,
&bus_msgbox_clk.common,
&bus_spinlock_clk.common,
&bus_codec_clk.common,
&bus_spdif_clk.common,
&bus_pio_clk.common,
&bus_ths_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_i2s2_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_scr0_clk.common,
&bus_scr1_clk.common,
&bus_ephy_clk.common,
&bus_dbg_clk.common,
&ths_clk.common,
&nand_clk.common,
&mmc0_clk.common,
&mmc1_clk.common,
&mmc2_clk.common,
&ts_clk.common,
&ce_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&i2s2_clk.common,
&spdif_clk.common,
&usb_phy0_clk.common,
&usb_phy1_clk.common,
&usb_phy2_clk.common,
&usb_phy3_clk.common,
&usb_ohci0_clk.common,
&usb_ohci1_clk.common,
&usb_ohci2_clk.common,
&usb_ohci3_clk.common,
&dram_clk.common,
&dram_ve_clk.common,
&dram_csi_clk.common,
&dram_deinterlace_clk.common,
&dram_ts_clk.common,
&de_clk.common,
&tcon_clk.common,
&tve_clk.common,
&deinterlace_clk.common,
&csi_misc_clk.common,
&csi_sclk_clk.common,
&csi_mclk_clk.common,
&ve_clk.common,
&ac_dig_clk.common,
&avs_clk.common,
&hdmi_clk.common,
&hdmi_ddc_clk.common,
&mbus_clk.common,
&gpu_clk.common,
};
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
/* We hardcode the divider to 1 for now */
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
"pll-periph0", 1, 2, 0);
static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
.hws = {
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
[CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_CPUX] = &cpux_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_AHB2] = &ahb2_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
[CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
[CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
[CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
[CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
[CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_BUS_TVE] = &bus_tve_clk.common.hw,
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
[CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
[CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
[CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_THS] = &ths_clk.common.hw,
[CLK_NAND] = &nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
[CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
[CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
[CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_I2S2] = &i2s2_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
[CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
[CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
[CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_DRAM_VE] = &dram_ve_clk.common.hw,
[CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
[CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
[CLK_DRAM_TS] = &dram_ts_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_TCON0] = &tcon_clk.common.hw,
[CLK_TVE] = &tve_clk.common.hw,
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
[CLK_CSI_MISC] = &csi_misc_clk.common.hw,
[CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
[CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_AC_DIG] = &ac_dig_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
[CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_GPU] = &gpu_clk.common.hw,
},
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
.num = CLK_NUMBER_H3,
};
static struct clk_hw_onecell_data sun50i_h5_hw_clks = {
.hws = {
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
[CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_CPUX] = &cpux_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_AHB2] = &ahb2_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
[CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
[CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
[CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
[CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
[CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_BUS_TVE] = &bus_tve_clk.common.hw,
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
[CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
[CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
[CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_THS] = &ths_clk.common.hw,
[CLK_NAND] = &nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_I2S2] = &i2s2_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
[CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
[CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
[CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_DRAM_VE] = &dram_ve_clk.common.hw,
[CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
[CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
[CLK_DRAM_TS] = &dram_ts_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_TCON0] = &tcon_clk.common.hw,
[CLK_TVE] = &tve_clk.common.hw,
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
[CLK_CSI_MISC] = &csi_misc_clk.common.hw,
[CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
[CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_AC_DIG] = &ac_dig_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
[CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_GPU] = &gpu_clk.common.hw,
},
.num = CLK_NUMBER_H5,
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
};
static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_USB_PHY1] = { 0x0cc, BIT(1) },
[RST_USB_PHY2] = { 0x0cc, BIT(2) },
[RST_USB_PHY3] = { 0x0cc, BIT(3) },
[RST_MBUS] = { 0x0fc, BIT(31) },
[RST_BUS_CE] = { 0x2c0, BIT(5) },
[RST_BUS_DMA] = { 0x2c0, BIT(6) },
[RST_BUS_MMC0] = { 0x2c0, BIT(8) },
[RST_BUS_MMC1] = { 0x2c0, BIT(9) },
[RST_BUS_MMC2] = { 0x2c0, BIT(10) },
[RST_BUS_NAND] = { 0x2c0, BIT(13) },
[RST_BUS_DRAM] = { 0x2c0, BIT(14) },
[RST_BUS_EMAC] = { 0x2c0, BIT(17) },
[RST_BUS_TS] = { 0x2c0, BIT(18) },
[RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
[RST_BUS_SPI0] = { 0x2c0, BIT(20) },
[RST_BUS_SPI1] = { 0x2c0, BIT(21) },
[RST_BUS_OTG] = { 0x2c0, BIT(23) },
[RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
[RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
[RST_BUS_EHCI2] = { 0x2c0, BIT(26) },
[RST_BUS_EHCI3] = { 0x2c0, BIT(27) },
[RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
[RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
[RST_BUS_OHCI2] = { 0x2c0, BIT(30) },
[RST_BUS_OHCI3] = { 0x2c0, BIT(31) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
[RST_BUS_TCON0] = { 0x2c4, BIT(3) },
[RST_BUS_TCON1] = { 0x2c4, BIT(4) },
[RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
[RST_BUS_CSI] = { 0x2c4, BIT(8) },
[RST_BUS_TVE] = { 0x2c4, BIT(9) },
[RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
[RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_GPU] = { 0x2c4, BIT(20) },
[RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
[RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
[RST_BUS_EPHY] = { 0x2c8, BIT(2) },
[RST_BUS_CODEC] = { 0x2d0, BIT(0) },
[RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
[RST_BUS_THS] = { 0x2d0, BIT(8) },
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2S1] = { 0x2d0, BIT(13) },
[RST_BUS_I2S2] = { 0x2d0, BIT(14) },
clk: sunxi-ng: Fix wrong reset register offsets The reset register offsets for UART*, I2C* and SCR were off by a few bytes. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-28 03:04:33 +08:00
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_I2C2] = { 0x2d8, BIT(2) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
[RST_BUS_SCR0] = { 0x2d8, BIT(20) },
};
static struct ccu_reset_map sun50i_h5_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
[RST_USB_PHY1] = { 0x0cc, BIT(1) },
[RST_USB_PHY2] = { 0x0cc, BIT(2) },
[RST_USB_PHY3] = { 0x0cc, BIT(3) },
[RST_MBUS] = { 0x0fc, BIT(31) },
[RST_BUS_CE] = { 0x2c0, BIT(5) },
[RST_BUS_DMA] = { 0x2c0, BIT(6) },
[RST_BUS_MMC0] = { 0x2c0, BIT(8) },
[RST_BUS_MMC1] = { 0x2c0, BIT(9) },
[RST_BUS_MMC2] = { 0x2c0, BIT(10) },
[RST_BUS_NAND] = { 0x2c0, BIT(13) },
[RST_BUS_DRAM] = { 0x2c0, BIT(14) },
[RST_BUS_EMAC] = { 0x2c0, BIT(17) },
[RST_BUS_TS] = { 0x2c0, BIT(18) },
[RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
[RST_BUS_SPI0] = { 0x2c0, BIT(20) },
[RST_BUS_SPI1] = { 0x2c0, BIT(21) },
[RST_BUS_OTG] = { 0x2c0, BIT(23) },
[RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
[RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
[RST_BUS_EHCI2] = { 0x2c0, BIT(26) },
[RST_BUS_EHCI3] = { 0x2c0, BIT(27) },
[RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
[RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
[RST_BUS_OHCI2] = { 0x2c0, BIT(30) },
[RST_BUS_OHCI3] = { 0x2c0, BIT(31) },
[RST_BUS_VE] = { 0x2c4, BIT(0) },
[RST_BUS_TCON0] = { 0x2c4, BIT(3) },
[RST_BUS_TCON1] = { 0x2c4, BIT(4) },
[RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
[RST_BUS_CSI] = { 0x2c4, BIT(8) },
[RST_BUS_TVE] = { 0x2c4, BIT(9) },
[RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
[RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
[RST_BUS_DE] = { 0x2c4, BIT(12) },
[RST_BUS_GPU] = { 0x2c4, BIT(20) },
[RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
[RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
[RST_BUS_DBG] = { 0x2c4, BIT(31) },
[RST_BUS_EPHY] = { 0x2c8, BIT(2) },
[RST_BUS_CODEC] = { 0x2d0, BIT(0) },
[RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
[RST_BUS_THS] = { 0x2d0, BIT(8) },
[RST_BUS_I2S0] = { 0x2d0, BIT(12) },
[RST_BUS_I2S1] = { 0x2d0, BIT(13) },
[RST_BUS_I2S2] = { 0x2d0, BIT(14) },
[RST_BUS_I2C0] = { 0x2d8, BIT(0) },
[RST_BUS_I2C1] = { 0x2d8, BIT(1) },
[RST_BUS_I2C2] = { 0x2d8, BIT(2) },
[RST_BUS_UART0] = { 0x2d8, BIT(16) },
[RST_BUS_UART1] = { 0x2d8, BIT(17) },
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
[RST_BUS_UART3] = { 0x2d8, BIT(19) },
[RST_BUS_SCR0] = { 0x2d8, BIT(20) },
[RST_BUS_SCR1] = { 0x2d8, BIT(20) },
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
};
static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
.ccu_clks = sun8i_h3_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_h3_ccu_clks),
.hw_clks = &sun8i_h3_hw_clks,
.resets = sun8i_h3_ccu_resets,
.num_resets = ARRAY_SIZE(sun8i_h3_ccu_resets),
};
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = {
.ccu_clks = sun50i_h5_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun50i_h5_ccu_clks),
.hw_clks = &sun50i_h5_hw_clks,
.resets = sun50i_h5_ccu_resets,
.num_resets = ARRAY_SIZE(sun50i_h5_ccu_resets),
};
clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change This patch utilizes the new PLL clk notifier to gate then ungate the PLL CPU clock after rate changes. This should prevent any system hangs resulting from cpufreq changes to the clk. Reported-by: Ondrej Jirman <megous@megous.com> Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-23 18:27:44 +08:00
static struct ccu_pll_nb sun8i_h3_pll_cpu_nb = {
.common = &pll_cpux_clk.common,
/* copy from pll_cpux_clk */
.enable = BIT(31),
.lock = BIT(28),
};
clk: sunxi-ng: fix PLL_CPUX adjusting on H3 When adjusting PLL_CPUX on H3, the PLL is temporarily driven too high, and the system becomes unstable (oopses or hangs). Add a notifier to avoid this situation by temporarily switching to a known stable 24 MHz oscillator. Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Lutz Sammer <johns98@gmx.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-25 08:28:47 +08:00
static struct ccu_mux_nb sun8i_h3_cpu_nb = {
.common = &cpux_clk.common,
.cm = &cpux_clk.mux,
.delay_us = 1, /* > 8 clock cycles at 24 MHz */
.bypass_index = 1, /* index of 24 MHz oscillator */
};
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static void __init sunxi_h3_h5_ccu_init(struct device_node *node,
const struct sunxi_ccu_desc *desc)
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
{
void __iomem *reg;
u32 val;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg)) {
clk: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-19 05:42:52 +08:00
pr_err("%pOF: Could not map the clock registers\n", node);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
return;
}
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
/* Force the PLL-Audio-1x divider to 1 */
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
val = readl(reg + SUN8I_H3_PLL_AUDIO_REG);
clk: sunxi-ng: h3: Fix audio clock divider offset The code had a typo and got the wrong offset for the hardcoded divider, fix that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Jean-Francois Moine <moinejf@free.fr> Reported-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160711203448.18062-1-maxime.ripard@free-electrons.com
2016-07-12 04:34:47 +08:00
val &= ~GENMASK(19, 16);
clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-12 16:37:01 +08:00
writel(val | (0 << 16), reg + SUN8I_H3_PLL_AUDIO_REG);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
sunxi_ccu_probe(node, reg, desc);
clk: sunxi-ng: fix PLL_CPUX adjusting on H3 When adjusting PLL_CPUX on H3, the PLL is temporarily driven too high, and the system becomes unstable (oopses or hangs). Add a notifier to avoid this situation by temporarily switching to a known stable 24 MHz oscillator. Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Lutz Sammer <johns98@gmx.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-25 08:28:47 +08:00
clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change This patch utilizes the new PLL clk notifier to gate then ungate the PLL CPU clock after rate changes. This should prevent any system hangs resulting from cpufreq changes to the clk. Reported-by: Ondrej Jirman <megous@megous.com> Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-23 18:27:44 +08:00
/* Gate then ungate PLL CPU after any rate changes */
ccu_pll_notifier_register(&sun8i_h3_pll_cpu_nb);
/* Reparent CPU during PLL CPU rate changes */
clk: sunxi-ng: fix PLL_CPUX adjusting on H3 When adjusting PLL_CPUX on H3, the PLL is temporarily driven too high, and the system becomes unstable (oopses or hangs). Add a notifier to avoid this situation by temporarily switching to a known stable 24 MHz oscillator. Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Lutz Sammer <johns98@gmx.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-25 08:28:47 +08:00
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
&sun8i_h3_cpu_nb);
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
}
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static void __init sun8i_h3_ccu_setup(struct device_node *node)
{
sunxi_h3_h5_ccu_init(node, &sun8i_h3_ccu_desc);
}
clk: sunxi-ng: Add H3 clocks Add the list of clocks and resets found in the H3 CCU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-14-maxime.ripard@free-electrons.com
2016-06-30 03:05:34 +08:00
CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
sun8i_h3_ccu_setup);
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver Allwinner H5 is a SoC that features a design which keeps the peripheral compatible with H3, so that it have also a CCU like the one on H3 -- only one bus gate/reset is added, and the mmc sample/output phases are removed because of MMC controller update. Add its support in our existing H3 CCU driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02 04:13:39 +08:00
static void __init sun50i_h5_ccu_setup(struct device_node *node)
{
sunxi_h3_h5_ccu_init(node, &sun50i_h5_ccu_desc);
}
CLK_OF_DECLARE(sun50i_h5_ccu, "allwinner,sun50i-h5-ccu",
sun50i_h5_ccu_setup);