linux/drivers/net/wireless/ath/ath9k/channel.c

137 lines
4.2 KiB
C
Raw Normal View History

/*
* Copyright (c) 2014 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "ath9k.h"
/* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
static int ath_set_channel(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hw *hw = sc->hw;
struct ath9k_channel *hchan;
struct cfg80211_chan_def *chandef = &sc->cur_chan->chandef;
struct ieee80211_channel *chan = chandef->chan;
int pos = chan->hw_value;
int old_pos = -1;
int r;
if (test_bit(ATH_OP_INVALID, &common->op_flags))
return -EIO;
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
chan->center_freq, chandef->width);
/* update survey stats for the old channel before switching */
spin_lock_bh(&common->cc_lock);
ath_update_survey_stats(sc);
spin_unlock_bh(&common->cc_lock);
ath9k_cmn_get_channel(hw, ah, chandef);
/* If the operating channel changes, change the survey in-use flags
* along with it.
* Reset the survey data for the new channel, unless we're switching
* back to the operating channel from an off-channel operation.
*/
if (!sc->cur_chan->offchannel && sc->cur_survey != &sc->survey[pos]) {
if (sc->cur_survey)
sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
sc->cur_survey = &sc->survey[pos];
memset(sc->cur_survey, 0, sizeof(struct survey_info));
sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
} else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
memset(&sc->survey[pos], 0, sizeof(struct survey_info));
}
hchan = &sc->sc_ah->channels[pos];
r = ath_reset_internal(sc, hchan);
if (r)
return r;
/* The most recent snapshot of channel->noisefloor for the old
* channel is only available after the hardware reset. Copy it to
* the survey stats now.
*/
if (old_pos >= 0)
ath_update_survey_nf(sc, old_pos);
/* Enable radar pulse detection if on a DFS channel. Spectral
* scanning and radar detection can not be used concurrently.
*/
if (hw->conf.radar_enabled) {
u32 rxfilter;
/* set HW specific DFS configuration */
ath9k_hw_set_radar_params(ah);
rxfilter = ath9k_hw_getrxfilter(ah);
rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
ATH9K_RX_FILTER_PHYERR;
ath9k_hw_setrxfilter(ah, rxfilter);
ath_dbg(common, DFS, "DFS enabled at freq %d\n",
chan->center_freq);
} else {
/* perform spectral scan if requested. */
if (test_bit(ATH_OP_SCANNING, &common->op_flags) &&
sc->spectral_mode == SPECTRAL_CHANSCAN)
ath9k_spectral_scan_trigger(hw);
}
return 0;
}
void ath_chanctx_init(struct ath_softc *sc)
{
struct ath_chanctx *ctx;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
int i, j;
sband = &common->sbands[IEEE80211_BAND_2GHZ];
if (!sband->n_channels)
sband = &common->sbands[IEEE80211_BAND_5GHZ];
chan = &sband->channels[0];
for (i = 0; i < ATH9K_NUM_CHANCTX; i++) {
ctx = &sc->chanctx[i];
cfg80211_chandef_create(&ctx->chandef, chan, NL80211_CHAN_HT20);
INIT_LIST_HEAD(&ctx->vifs);
ctx->txpower = ATH_TXPOWER_MAX;
for (j = 0; j < ARRAY_SIZE(ctx->acq); j++)
INIT_LIST_HEAD(&ctx->acq[j]);
}
sc->cur_chan = &sc->chanctx[0];
}
int ath_chanctx_set_channel(struct ath_softc *sc, struct ath_chanctx *ctx,
struct cfg80211_chan_def *chandef)
{
memcpy(&ctx->chandef, chandef, sizeof(ctx->chandef));
if (ctx != sc->cur_chan)
return 0;
return ath_set_channel(sc);
}