mirror of https://gitee.com/openkylin/linux.git
661 lines
16 KiB
C
661 lines
16 KiB
C
|
/*
|
||
|
* Generic driver for memory-mapped GPIO controllers.
|
||
|
*
|
||
|
* Copyright 2008 MontaVista Software, Inc.
|
||
|
* Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify it
|
||
|
* under the terms of the GNU General Public License as published by the
|
||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||
|
* option) any later version.
|
||
|
*
|
||
|
* ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`.......
|
||
|
* ...`` ```````..
|
||
|
* ..The simplest form of a GPIO controller that the driver supports is``
|
||
|
* `.just a single "data" register, where GPIO state can be read and/or `
|
||
|
* `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.```````
|
||
|
* `````````
|
||
|
___
|
||
|
_/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,...
|
||
|
__________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO .
|
||
|
o ` ~~~~\___/~~~~ ` controller in FPGA is ,.`
|
||
|
`....trivial..'~`.```.```
|
||
|
* ```````
|
||
|
* .```````~~~~`..`.``.``.
|
||
|
* . The driver supports `... ,..```.`~~~```````````````....````.``,,
|
||
|
* . big-endian notation, just`. .. A bit more sophisticated controllers ,
|
||
|
* . register the device with -be`. .with a pair of set/clear-bit registers ,
|
||
|
* `.. suffix. ```~~`````....`.` . affecting the data register and the .`
|
||
|
* ``.`.``...``` ```.. output pins are also supported.`
|
||
|
* ^^ `````.`````````.,``~``~``~~``````
|
||
|
* . ^^
|
||
|
* ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`..
|
||
|
* .. The expectation is that in at least some cases . ,-~~~-,
|
||
|
* .this will be used with roll-your-own ASIC/FPGA .` \ /
|
||
|
* .logic in Verilog or VHDL. ~~~`````````..`````~~` \ /
|
||
|
* ..````````......``````````` \o_
|
||
|
* |
|
||
|
* ^^ / \
|
||
|
*
|
||
|
* ...`````~~`.....``.`..........``````.`.``.```........``.
|
||
|
* ` 8, 16, 32 and 64 bits registers are supported, and``.
|
||
|
* . the number of GPIOs is determined by the width of ~
|
||
|
* .. the registers. ,............```.`.`..`.`.~~~.`.`.`~
|
||
|
* `.......````.```
|
||
|
*/
|
||
|
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/bug.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/spinlock.h>
|
||
|
#include <linux/compiler.h>
|
||
|
#include <linux/types.h>
|
||
|
#include <linux/errno.h>
|
||
|
#include <linux/log2.h>
|
||
|
#include <linux/ioport.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/gpio/driver.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/bitops.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/mod_devicetable.h>
|
||
|
|
||
|
static void bgpio_write8(void __iomem *reg, unsigned long data)
|
||
|
{
|
||
|
writeb(data, reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_read8(void __iomem *reg)
|
||
|
{
|
||
|
return readb(reg);
|
||
|
}
|
||
|
|
||
|
static void bgpio_write16(void __iomem *reg, unsigned long data)
|
||
|
{
|
||
|
writew(data, reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_read16(void __iomem *reg)
|
||
|
{
|
||
|
return readw(reg);
|
||
|
}
|
||
|
|
||
|
static void bgpio_write32(void __iomem *reg, unsigned long data)
|
||
|
{
|
||
|
writel(data, reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_read32(void __iomem *reg)
|
||
|
{
|
||
|
return readl(reg);
|
||
|
}
|
||
|
|
||
|
#if BITS_PER_LONG >= 64
|
||
|
static void bgpio_write64(void __iomem *reg, unsigned long data)
|
||
|
{
|
||
|
writeq(data, reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_read64(void __iomem *reg)
|
||
|
{
|
||
|
return readq(reg);
|
||
|
}
|
||
|
#endif /* BITS_PER_LONG >= 64 */
|
||
|
|
||
|
static void bgpio_write16be(void __iomem *reg, unsigned long data)
|
||
|
{
|
||
|
iowrite16be(data, reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_read16be(void __iomem *reg)
|
||
|
{
|
||
|
return ioread16be(reg);
|
||
|
}
|
||
|
|
||
|
static void bgpio_write32be(void __iomem *reg, unsigned long data)
|
||
|
{
|
||
|
iowrite32be(data, reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_read32be(void __iomem *reg)
|
||
|
{
|
||
|
return ioread32be(reg);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_pin2mask(struct gpio_chip *gc, unsigned int pin)
|
||
|
{
|
||
|
return BIT(pin);
|
||
|
}
|
||
|
|
||
|
static unsigned long bgpio_pin2mask_be(struct gpio_chip *gc,
|
||
|
unsigned int pin)
|
||
|
{
|
||
|
return BIT(gc->bgpio_bits - 1 - pin);
|
||
|
}
|
||
|
|
||
|
static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
unsigned long pinmask = gc->pin2mask(gc, gpio);
|
||
|
|
||
|
if (gc->bgpio_dir & pinmask)
|
||
|
return !!(gc->read_reg(gc->reg_set) & pinmask);
|
||
|
else
|
||
|
return !!(gc->read_reg(gc->reg_dat) & pinmask);
|
||
|
}
|
||
|
|
||
|
static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
return !!(gc->read_reg(gc->reg_dat) & gc->pin2mask(gc, gpio));
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_none(struct gpio_chip *gc, unsigned int gpio, int val)
|
||
|
{
|
||
|
}
|
||
|
|
||
|
static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
|
||
|
{
|
||
|
unsigned long mask = gc->pin2mask(gc, gpio);
|
||
|
unsigned long flags;
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
if (val)
|
||
|
gc->bgpio_data |= mask;
|
||
|
else
|
||
|
gc->bgpio_data &= ~mask;
|
||
|
|
||
|
gc->write_reg(gc->reg_dat, gc->bgpio_data);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio,
|
||
|
int val)
|
||
|
{
|
||
|
unsigned long mask = gc->pin2mask(gc, gpio);
|
||
|
|
||
|
if (val)
|
||
|
gc->write_reg(gc->reg_set, mask);
|
||
|
else
|
||
|
gc->write_reg(gc->reg_clr, mask);
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val)
|
||
|
{
|
||
|
unsigned long mask = gc->pin2mask(gc, gpio);
|
||
|
unsigned long flags;
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
if (val)
|
||
|
gc->bgpio_data |= mask;
|
||
|
else
|
||
|
gc->bgpio_data &= ~mask;
|
||
|
|
||
|
gc->write_reg(gc->reg_set, gc->bgpio_data);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
}
|
||
|
|
||
|
static void bgpio_multiple_get_masks(struct gpio_chip *gc,
|
||
|
unsigned long *mask, unsigned long *bits,
|
||
|
unsigned long *set_mask,
|
||
|
unsigned long *clear_mask)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
*set_mask = 0;
|
||
|
*clear_mask = 0;
|
||
|
|
||
|
for (i = 0; i < gc->bgpio_bits; i++) {
|
||
|
if (*mask == 0)
|
||
|
break;
|
||
|
if (__test_and_clear_bit(i, mask)) {
|
||
|
if (test_bit(i, bits))
|
||
|
*set_mask |= gc->pin2mask(gc, i);
|
||
|
else
|
||
|
*clear_mask |= gc->pin2mask(gc, i);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_multiple_single_reg(struct gpio_chip *gc,
|
||
|
unsigned long *mask,
|
||
|
unsigned long *bits,
|
||
|
void __iomem *reg)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
unsigned long set_mask, clear_mask;
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
|
||
|
|
||
|
gc->bgpio_data |= set_mask;
|
||
|
gc->bgpio_data &= ~clear_mask;
|
||
|
|
||
|
gc->write_reg(reg, gc->bgpio_data);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
|
||
|
unsigned long *bits)
|
||
|
{
|
||
|
bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_dat);
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_multiple_set(struct gpio_chip *gc, unsigned long *mask,
|
||
|
unsigned long *bits)
|
||
|
{
|
||
|
bgpio_set_multiple_single_reg(gc, mask, bits, gc->reg_set);
|
||
|
}
|
||
|
|
||
|
static void bgpio_set_multiple_with_clear(struct gpio_chip *gc,
|
||
|
unsigned long *mask,
|
||
|
unsigned long *bits)
|
||
|
{
|
||
|
unsigned long set_mask, clear_mask;
|
||
|
|
||
|
bgpio_multiple_get_masks(gc, mask, bits, &set_mask, &clear_mask);
|
||
|
|
||
|
if (set_mask)
|
||
|
gc->write_reg(gc->reg_set, set_mask);
|
||
|
if (clear_mask)
|
||
|
gc->write_reg(gc->reg_clr, clear_mask);
|
||
|
}
|
||
|
|
||
|
static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_dir_out_err(struct gpio_chip *gc, unsigned int gpio,
|
||
|
int val)
|
||
|
{
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio,
|
||
|
int val)
|
||
|
{
|
||
|
gc->set(gc, gpio, val);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
gc->bgpio_dir &= ~gc->pin2mask(gc, gpio);
|
||
|
gc->write_reg(gc->reg_dir, gc->bgpio_dir);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
/* Return 0 if output, 1 of input */
|
||
|
return !(gc->read_reg(gc->reg_dir) & gc->pin2mask(gc, gpio));
|
||
|
}
|
||
|
|
||
|
static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
|
||
|
gc->set(gc, gpio, val);
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
gc->bgpio_dir |= gc->pin2mask(gc, gpio);
|
||
|
gc->write_reg(gc->reg_dir, gc->bgpio_dir);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_dir_in_inv(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
gc->bgpio_dir |= gc->pin2mask(gc, gpio);
|
||
|
gc->write_reg(gc->reg_dir, gc->bgpio_dir);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
|
||
|
gc->set(gc, gpio, val);
|
||
|
|
||
|
spin_lock_irqsave(&gc->bgpio_lock, flags);
|
||
|
|
||
|
gc->bgpio_dir &= ~gc->pin2mask(gc, gpio);
|
||
|
gc->write_reg(gc->reg_dir, gc->bgpio_dir);
|
||
|
|
||
|
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_get_dir_inv(struct gpio_chip *gc, unsigned int gpio)
|
||
|
{
|
||
|
/* Return 0 if output, 1 if input */
|
||
|
return !!(gc->read_reg(gc->reg_dir) & gc->pin2mask(gc, gpio));
|
||
|
}
|
||
|
|
||
|
static int bgpio_setup_accessors(struct device *dev,
|
||
|
struct gpio_chip *gc,
|
||
|
bool bit_be,
|
||
|
bool byte_be)
|
||
|
{
|
||
|
|
||
|
switch (gc->bgpio_bits) {
|
||
|
case 8:
|
||
|
gc->read_reg = bgpio_read8;
|
||
|
gc->write_reg = bgpio_write8;
|
||
|
break;
|
||
|
case 16:
|
||
|
if (byte_be) {
|
||
|
gc->read_reg = bgpio_read16be;
|
||
|
gc->write_reg = bgpio_write16be;
|
||
|
} else {
|
||
|
gc->read_reg = bgpio_read16;
|
||
|
gc->write_reg = bgpio_write16;
|
||
|
}
|
||
|
break;
|
||
|
case 32:
|
||
|
if (byte_be) {
|
||
|
gc->read_reg = bgpio_read32be;
|
||
|
gc->write_reg = bgpio_write32be;
|
||
|
} else {
|
||
|
gc->read_reg = bgpio_read32;
|
||
|
gc->write_reg = bgpio_write32;
|
||
|
}
|
||
|
break;
|
||
|
#if BITS_PER_LONG >= 64
|
||
|
case 64:
|
||
|
if (byte_be) {
|
||
|
dev_err(dev,
|
||
|
"64 bit big endian byte order unsupported\n");
|
||
|
return -EINVAL;
|
||
|
} else {
|
||
|
gc->read_reg = bgpio_read64;
|
||
|
gc->write_reg = bgpio_write64;
|
||
|
}
|
||
|
break;
|
||
|
#endif /* BITS_PER_LONG >= 64 */
|
||
|
default:
|
||
|
dev_err(dev, "unsupported data width %u bits\n", gc->bgpio_bits);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
gc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Create the device and allocate the resources. For setting GPIO's there are
|
||
|
* three supported configurations:
|
||
|
*
|
||
|
* - single input/output register resource (named "dat").
|
||
|
* - set/clear pair (named "set" and "clr").
|
||
|
* - single output register resource and single input resource ("set" and
|
||
|
* dat").
|
||
|
*
|
||
|
* For the single output register, this drives a 1 by setting a bit and a zero
|
||
|
* by clearing a bit. For the set clr pair, this drives a 1 by setting a bit
|
||
|
* in the set register and clears it by setting a bit in the clear register.
|
||
|
* The configuration is detected by which resources are present.
|
||
|
*
|
||
|
* For setting the GPIO direction, there are three supported configurations:
|
||
|
*
|
||
|
* - simple bidirection GPIO that requires no configuration.
|
||
|
* - an output direction register (named "dirout") where a 1 bit
|
||
|
* indicates the GPIO is an output.
|
||
|
* - an input direction register (named "dirin") where a 1 bit indicates
|
||
|
* the GPIO is an input.
|
||
|
*/
|
||
|
static int bgpio_setup_io(struct gpio_chip *gc,
|
||
|
void __iomem *dat,
|
||
|
void __iomem *set,
|
||
|
void __iomem *clr,
|
||
|
unsigned long flags)
|
||
|
{
|
||
|
|
||
|
gc->reg_dat = dat;
|
||
|
if (!gc->reg_dat)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (set && clr) {
|
||
|
gc->reg_set = set;
|
||
|
gc->reg_clr = clr;
|
||
|
gc->set = bgpio_set_with_clear;
|
||
|
gc->set_multiple = bgpio_set_multiple_with_clear;
|
||
|
} else if (set && !clr) {
|
||
|
gc->reg_set = set;
|
||
|
gc->set = bgpio_set_set;
|
||
|
gc->set_multiple = bgpio_set_multiple_set;
|
||
|
} else if (flags & BGPIOF_NO_OUTPUT) {
|
||
|
gc->set = bgpio_set_none;
|
||
|
gc->set_multiple = NULL;
|
||
|
} else {
|
||
|
gc->set = bgpio_set;
|
||
|
gc->set_multiple = bgpio_set_multiple;
|
||
|
}
|
||
|
|
||
|
if (!(flags & BGPIOF_UNREADABLE_REG_SET) &&
|
||
|
(flags & BGPIOF_READ_OUTPUT_REG_SET))
|
||
|
gc->get = bgpio_get_set;
|
||
|
else
|
||
|
gc->get = bgpio_get;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_setup_direction(struct gpio_chip *gc,
|
||
|
void __iomem *dirout,
|
||
|
void __iomem *dirin,
|
||
|
unsigned long flags)
|
||
|
{
|
||
|
if (dirout && dirin) {
|
||
|
return -EINVAL;
|
||
|
} else if (dirout) {
|
||
|
gc->reg_dir = dirout;
|
||
|
gc->direction_output = bgpio_dir_out;
|
||
|
gc->direction_input = bgpio_dir_in;
|
||
|
gc->get_direction = bgpio_get_dir;
|
||
|
} else if (dirin) {
|
||
|
gc->reg_dir = dirin;
|
||
|
gc->direction_output = bgpio_dir_out_inv;
|
||
|
gc->direction_input = bgpio_dir_in_inv;
|
||
|
gc->get_direction = bgpio_get_dir_inv;
|
||
|
} else {
|
||
|
if (flags & BGPIOF_NO_OUTPUT)
|
||
|
gc->direction_output = bgpio_dir_out_err;
|
||
|
else
|
||
|
gc->direction_output = bgpio_simple_dir_out;
|
||
|
gc->direction_input = bgpio_simple_dir_in;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin)
|
||
|
{
|
||
|
if (gpio_pin < chip->ngpio)
|
||
|
return 0;
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
int bgpio_init(struct gpio_chip *gc, struct device *dev,
|
||
|
unsigned long sz, void __iomem *dat, void __iomem *set,
|
||
|
void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
|
||
|
unsigned long flags)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
if (!is_power_of_2(sz))
|
||
|
return -EINVAL;
|
||
|
|
||
|
gc->bgpio_bits = sz * 8;
|
||
|
if (gc->bgpio_bits > BITS_PER_LONG)
|
||
|
return -EINVAL;
|
||
|
|
||
|
spin_lock_init(&gc->bgpio_lock);
|
||
|
gc->parent = dev;
|
||
|
gc->label = dev_name(dev);
|
||
|
gc->base = -1;
|
||
|
gc->ngpio = gc->bgpio_bits;
|
||
|
gc->request = bgpio_request;
|
||
|
|
||
|
ret = bgpio_setup_io(gc, dat, set, clr, flags);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = bgpio_setup_accessors(dev, gc, flags & BGPIOF_BIG_ENDIAN,
|
||
|
flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = bgpio_setup_direction(gc, dirout, dirin, flags);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
gc->bgpio_data = gc->read_reg(gc->reg_dat);
|
||
|
if (gc->set == bgpio_set_set &&
|
||
|
!(flags & BGPIOF_UNREADABLE_REG_SET))
|
||
|
gc->bgpio_data = gc->read_reg(gc->reg_set);
|
||
|
if (gc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR))
|
||
|
gc->bgpio_dir = gc->read_reg(gc->reg_dir);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
EXPORT_SYMBOL_GPL(bgpio_init);
|
||
|
|
||
|
#if IS_ENABLED(CONFIG_GPIO_GENERIC_PLATFORM)
|
||
|
|
||
|
static void __iomem *bgpio_map(struct platform_device *pdev,
|
||
|
const char *name,
|
||
|
resource_size_t sane_sz)
|
||
|
{
|
||
|
struct resource *r;
|
||
|
resource_size_t sz;
|
||
|
|
||
|
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
|
||
|
if (!r)
|
||
|
return NULL;
|
||
|
|
||
|
sz = resource_size(r);
|
||
|
if (sz != sane_sz)
|
||
|
return IOMEM_ERR_PTR(-EINVAL);
|
||
|
|
||
|
return devm_ioremap_resource(&pdev->dev, r);
|
||
|
}
|
||
|
|
||
|
static int bgpio_pdev_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct resource *r;
|
||
|
void __iomem *dat;
|
||
|
void __iomem *set;
|
||
|
void __iomem *clr;
|
||
|
void __iomem *dirout;
|
||
|
void __iomem *dirin;
|
||
|
unsigned long sz;
|
||
|
unsigned long flags = pdev->id_entry->driver_data;
|
||
|
int err;
|
||
|
struct gpio_chip *gc;
|
||
|
struct bgpio_pdata *pdata = dev_get_platdata(dev);
|
||
|
|
||
|
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat");
|
||
|
if (!r)
|
||
|
return -EINVAL;
|
||
|
|
||
|
sz = resource_size(r);
|
||
|
|
||
|
dat = bgpio_map(pdev, "dat", sz);
|
||
|
if (IS_ERR(dat))
|
||
|
return PTR_ERR(dat);
|
||
|
|
||
|
set = bgpio_map(pdev, "set", sz);
|
||
|
if (IS_ERR(set))
|
||
|
return PTR_ERR(set);
|
||
|
|
||
|
clr = bgpio_map(pdev, "clr", sz);
|
||
|
if (IS_ERR(clr))
|
||
|
return PTR_ERR(clr);
|
||
|
|
||
|
dirout = bgpio_map(pdev, "dirout", sz);
|
||
|
if (IS_ERR(dirout))
|
||
|
return PTR_ERR(dirout);
|
||
|
|
||
|
dirin = bgpio_map(pdev, "dirin", sz);
|
||
|
if (IS_ERR(dirin))
|
||
|
return PTR_ERR(dirin);
|
||
|
|
||
|
gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
|
||
|
if (!gc)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
err = bgpio_init(gc, dev, sz, dat, set, clr, dirout, dirin, flags);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
if (pdata) {
|
||
|
if (pdata->label)
|
||
|
gc->label = pdata->label;
|
||
|
gc->base = pdata->base;
|
||
|
if (pdata->ngpio > 0)
|
||
|
gc->ngpio = pdata->ngpio;
|
||
|
}
|
||
|
|
||
|
platform_set_drvdata(pdev, gc);
|
||
|
|
||
|
return devm_gpiochip_add_data(&pdev->dev, gc, NULL);
|
||
|
}
|
||
|
|
||
|
static const struct platform_device_id bgpio_id_table[] = {
|
||
|
{
|
||
|
.name = "basic-mmio-gpio",
|
||
|
.driver_data = 0,
|
||
|
}, {
|
||
|
.name = "basic-mmio-gpio-be",
|
||
|
.driver_data = BGPIOF_BIG_ENDIAN,
|
||
|
},
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(platform, bgpio_id_table);
|
||
|
|
||
|
static struct platform_driver bgpio_driver = {
|
||
|
.driver = {
|
||
|
.name = "basic-mmio-gpio",
|
||
|
},
|
||
|
.id_table = bgpio_id_table,
|
||
|
.probe = bgpio_pdev_probe,
|
||
|
};
|
||
|
|
||
|
module_platform_driver(bgpio_driver);
|
||
|
|
||
|
#endif /* CONFIG_GPIO_GENERIC_PLATFORM */
|
||
|
|
||
|
MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
|
||
|
MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
|
||
|
MODULE_LICENSE("GPL");
|