linux/drivers/media/usb/au0828/au0828-core.c

/*
 *  Driver for the Auvitek USB bridge
 *
 *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include "au0828.h"
#include "au8522.h"

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/mutex.h>

/* Due to enum tuner_pad_index */
#include <media/tuner.h>

/*
 * 1 = General debug messages
 * 2 = USB handling
 * 4 = I2C related
 * 8 = Bridge related
 * 16 = IR related
 */
int au0828_debug;
module_param_named(debug, au0828_debug, int, 0644);
MODULE_PARM_DESC(debug,
		 "set debug bitmask: 1=general, 2=USB, 4=I2C, 8=bridge, 16=IR");

static unsigned int disable_usb_speed_check;
module_param(disable_usb_speed_check, int, 0444);
MODULE_PARM_DESC(disable_usb_speed_check,
		 "override min bandwidth requirement of 480M bps");

#define _AU0828_BULKPIPE 0x03
#define _BULKPIPESIZE 0xffff

static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value,
			    u16 index);
static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
	u16 index, unsigned char *cp, u16 size);

/* USB Direction */
#define CMD_REQUEST_IN		0x00
#define CMD_REQUEST_OUT		0x01

u32 au0828_readreg(struct au0828_dev *dev, u16 reg)
{
	u8 result = 0;

	recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, &result, 1);
	dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, result);

	return result;
}

u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val)
{
	dprintk(8, "%s(0x%04x, 0x%02x)\n", __func__, reg, val);
	return send_control_msg(dev, CMD_REQUEST_OUT, val, reg);
}

static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value,
	u16 index)
{
	int status = -ENODEV;

	if (dev->usbdev) {

		/* cp must be memory that has been allocated by kmalloc */
		status = usb_control_msg(dev->usbdev,
				usb_sndctrlpipe(dev->usbdev, 0),
				request,
				USB_DIR_OUT | USB_TYPE_VENDOR |
					USB_RECIP_DEVICE,
				value, index, NULL, 0, 1000);

		status = min(status, 0);

		if (status < 0) {
			pr_err("%s() Failed sending control message, error %d.\n",
				__func__, status);
		}

	}

	return status;
}

static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
	u16 index, unsigned char *cp, u16 size)
{
	int status = -ENODEV;
	mutex_lock(&dev->mutex);
	if (dev->usbdev) {
		status = usb_control_msg(dev->usbdev,
				usb_rcvctrlpipe(dev->usbdev, 0),
				request,
				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
				value, index,
				dev->ctrlmsg, size, 1000);

		status = min(status, 0);

		if (status < 0) {
			pr_err("%s() Failed receiving control message, error %d.\n",
				__func__, status);
		}

		/* the host controller requires heap allocated memory, which
		   is why we didn't just pass "cp" into usb_control_msg */
		memcpy(cp, dev->ctrlmsg, size);
	}
	mutex_unlock(&dev->mutex);
	return status;
}

static void au0828_unregister_media_device(struct au0828_dev *dev)
{

#ifdef CONFIG_MEDIA_CONTROLLER
	if (dev->media_dev &&
		media_devnode_is_registered(&dev->media_dev->devnode)) {
		media_device_unregister(dev->media_dev);
		media_device_cleanup(dev->media_dev);
		dev->media_dev = NULL;
	}
#endif
}

void au0828_usb_release(struct au0828_dev *dev)
{
	au0828_unregister_media_device(dev);

	/* I2C */
	au0828_i2c_unregister(dev);

	kfree(dev);
}

static void au0828_usb_disconnect(struct usb_interface *interface)
{
	struct au0828_dev *dev = usb_get_intfdata(interface);

	dprintk(1, "%s()\n", __func__);

	/* there is a small window after disconnect, before
	   dev->usbdev is NULL, for poll (e.g: IR) try to access
	   the device and fill the dmesg with error messages.
	   Set the status so poll routines can check and avoid
	   access after disconnect.
	*/
	dev->dev_state = DEV_DISCONNECTED;

	au0828_rc_unregister(dev);
	/* Digital TV */
	au0828_dvb_unregister(dev);

	usb_set_intfdata(interface, NULL);
	mutex_lock(&dev->mutex);
	dev->usbdev = NULL;
	mutex_unlock(&dev->mutex);
	if (au0828_analog_unregister(dev)) {
		/*
		 * No need to call au0828_usb_release() if V4L2 is enabled,
		 * as this is already called via au0828_usb_v4l2_release()
		 */
		return;
	}
	au0828_usb_release(dev);
}

static int au0828_media_device_init(struct au0828_dev *dev,
				    struct usb_device *udev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
	struct media_device *mdev;

	mdev = media_device_get_devres(&udev->dev);
	if (!mdev)
		return -ENOMEM;

	/* check if media device is already initialized */
	if (!mdev->dev)
		media_device_usb_init(mdev, udev, udev->product);

	dev->media_dev = mdev;
#endif
	return 0;
}

static void au0828_media_graph_notify(struct media_entity *new,
				      void *notify_data)
{
#ifdef CONFIG_MEDIA_CONTROLLER
	struct au0828_dev *dev = (struct au0828_dev *) notify_data;
	int ret;

	if (!dev->decoder)
		return;

	switch (new->function) {
	case MEDIA_ENT_F_AUDIO_MIXER:
		ret = media_create_pad_link(dev->decoder,
					    AU8522_PAD_AUDIO_OUT,
					    new, 0,
					    MEDIA_LNK_FL_ENABLED);
		if (ret)
			dev_err(&dev->usbdev->dev,
				"Mixer Pad Link Create Error: %d\n",
				ret);
		break;
	default:
		break;
	}
#endif
}

static int au0828_enable_source(struct media_entity *entity,
				struct media_pipeline *pipe)
{
#ifdef CONFIG_MEDIA_CONTROLLER
	struct media_entity  *source, *find_source;
	struct media_entity *sink;
	struct media_link *link, *found_link = NULL;
	int ret = 0;
	struct media_device *mdev = entity->graph_obj.mdev;
	struct au0828_dev *dev;

	if (!mdev)
		return -ENODEV;

	mutex_lock(&mdev->graph_mutex);

	dev = mdev->source_priv;

	/*
	 * For Audio and V4L2 entity, find the link to which decoder
	 * is the sink. Look for an active link between decoder and
	 * source (tuner/s-video/Composite), if one exists, nothing
	 * to do. If not, look for any  active links between source
	 * and any other entity. If one exists, source is busy. If
	 * source is free, setup link and start pipeline from source.
	 * For DVB FE entity, the source for the link is the tuner.
	 * Check if tuner is available and setup link and start
	 * pipeline.
	*/
	if (entity->function == MEDIA_ENT_F_DTV_DEMOD) {
		sink = entity;
		find_source = dev->tuner;
	} else {
		/* Analog isn't configured or register failed */
		if (!dev->decoder) {
			ret = -ENODEV;
			goto end;
		}

		sink = dev->decoder;

		/*
		 * Default input is tuner and default input_type
		 * is AU0828_VMUX_TELEVISION.
		 * FIXME:
		 * There is a problem when s_input is called to
		 * change the default input. s_input will try to
		 * enable_source before attempting to change the
		 * input on the device, and will end up enabling
		 * default source which is tuner.
		 *
		 * Additional logic is necessary in au0828
		 * to detect that the input has changed and
		 * enable the right source.
		*/

		if (dev->input_type == AU0828_VMUX_TELEVISION)
			find_source = dev->tuner;
		else if (dev->input_type == AU0828_VMUX_SVIDEO ||
			 dev->input_type == AU0828_VMUX_COMPOSITE)
			find_source = &dev->input_ent[dev->input_type];
		else {
			/* unknown input - let user select input */
			ret = 0;
			goto end;
		}
	}

	/* Is an active link between sink and source */
	if (dev->active_link) {
		/*
		 * If DVB is using the tuner and calling entity is
		 * audio/video, the following check will be false,
		 * since sink is different. Result is Busy.
		 */
		if (dev->active_link->sink->entity == sink &&
		    dev->active_link->source->entity == find_source) {
			/*
			 * Either ALSA or Video own tuner. sink is
			 * the same for both. Prevent Video stepping
			 * on ALSA when ALSA owns the source.
			*/
			if (dev->active_link_owner != entity &&
			    dev->active_link_owner->function ==
						MEDIA_ENT_F_AUDIO_CAPTURE) {
				pr_debug("ALSA has the tuner\n");
				ret = -EBUSY;
				goto end;
			}
			ret = 0;
			goto end;
		} else {
			ret = -EBUSY;
			goto end;
		}
	}

	list_for_each_entry(link, &sink->links, list) {
		/* Check sink, and source */
		if (link->sink->entity == sink &&
		    link->source->entity == find_source) {
			found_link = link;
			break;
		}
	}

	if (!found_link) {
		ret = -ENODEV;
		goto end;
	}

	/* activate link between source and sink and start pipeline */
	source = found_link->source->entity;
	ret = __media_entity_setup_link(found_link, MEDIA_LNK_FL_ENABLED);
	if (ret) {
		pr_err("Activate tuner link %s->%s. Error %d\n",
			source->name, sink->name, ret);
		goto end;
	}

	ret = __media_entity_pipeline_start(entity, pipe);
	if (ret) {
		pr_err("Start Pipeline: %s->%s Error %d\n",
			source->name, entity->name, ret);
		ret = __media_entity_setup_link(found_link, 0);
		pr_err("Deactivate link Error %d\n", ret);
		goto end;
	}
	/*
	 * save active link and active link owner to avoid audio
	 * deactivating video owned link from disable_source and
	 * vice versa
	*/
	dev->active_link = found_link;
	dev->active_link_owner = entity;
	dev->active_source = source;
	dev->active_sink = sink;

	pr_debug("Enabled Source: %s->%s->%s Ret %d\n",
		 dev->active_source->name, dev->active_sink->name,
		 dev->active_link_owner->name, ret);
end:
	mutex_unlock(&mdev->graph_mutex);
	pr_debug("au0828_enable_source() end %s %d %d\n",
		 entity->name, entity->function, ret);
	return ret;
#endif
	return 0;
}

static void au0828_disable_source(struct media_entity *entity)
{
#ifdef CONFIG_MEDIA_CONTROLLER
	int ret = 0;
	struct media_device *mdev = entity->graph_obj.mdev;
	struct au0828_dev *dev;

	if (!mdev)
		return;

	mutex_lock(&mdev->graph_mutex);
	dev = mdev->source_priv;

	if (!dev->active_link) {
		ret = -ENODEV;
		goto end;
	}

	/* link is active - stop pipeline from source (tuner) */
	if (dev->active_link->sink->entity == dev->active_sink &&
	    dev->active_link->source->entity == dev->active_source) {
		/*
		 * prevent video from deactivating link when audio
		 * has active pipeline
		*/
		if (dev->active_link_owner != entity)
			goto end;
		__media_entity_pipeline_stop(entity);
		ret = __media_entity_setup_link(dev->active_link, 0);
		if (ret)
			pr_err("Deactivate link Error %d\n", ret);

		pr_debug("Disabled Source: %s->%s->%s Ret %d\n",
			 dev->active_source->name, dev->active_sink->name,
			 dev->active_link_owner->name, ret);

		dev->active_link = NULL;
		dev->active_link_owner = NULL;
		dev->active_source = NULL;
		dev->active_sink = NULL;
	}

end:
	mutex_unlock(&mdev->graph_mutex);
#endif
}

static int au0828_media_device_register(struct au0828_dev *dev,
					struct usb_device *udev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
	int ret;

	if (!dev->media_dev)
		return 0;

	if (!media_devnode_is_registered(&dev->media_dev->devnode)) {

		/* register media device */
		ret = media_device_register(dev->media_dev);
		if (ret) {
			dev_err(&udev->dev,
				"Media Device Register Error: %d\n", ret);
			return ret;
		}
	}
	/* register entity_notify callback */
	dev->entity_notify.notify_data = (void *) dev;
	dev->entity_notify.notify = (void *) au0828_media_graph_notify;
	ret = media_device_register_entity_notify(dev->media_dev,
						  &dev->entity_notify);
	if (ret) {
		dev_err(&udev->dev,
			"Media Device register entity_notify Error: %d\n",
			ret);
		return ret;
	}
	/* set enable_source */
	dev->media_dev->source_priv = (void *) dev;
	dev->media_dev->enable_source = au0828_enable_source;
	dev->media_dev->disable_source = au0828_disable_source;
#endif
	return 0;
}

static int au0828_usb_probe(struct usb_interface *interface,
	const struct usb_device_id *id)
{
	int ifnum;
	int retval = 0;

	struct au0828_dev *dev;
	struct usb_device *usbdev = interface_to_usbdev(interface);

	ifnum = interface->altsetting->desc.bInterfaceNumber;

	if (ifnum != 0)
		return -ENODEV;

	dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__,
		le16_to_cpu(usbdev->descriptor.idVendor),
		le16_to_cpu(usbdev->descriptor.idProduct),
		ifnum);

	/*
	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
	 * video stream wouldn't likely work, since 12 Mbps is generally
	 * not enough even for most Digital TV streams.
	 */
	if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
		pr_err("au0828: Device initialization failed.\n");
		pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n");
		return -ENODEV;
	}

	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
	if (dev == NULL) {
		pr_err("%s() Unable to allocate memory\n", __func__);
		return -ENOMEM;
	}

	mutex_init(&dev->lock);
	mutex_lock(&dev->lock);
	mutex_init(&dev->mutex);
	mutex_init(&dev->dvb.lock);
	dev->usbdev = usbdev;
	dev->boardnr = id->driver_info;
	dev->board = au0828_boards[dev->boardnr];

	/* Initialize the media controller */
	retval = au0828_media_device_init(dev, usbdev);
	if (retval) {
		pr_err("%s() au0828_media_device_init failed\n",
		       __func__);
		mutex_unlock(&dev->lock);
		kfree(dev);
		return retval;
	}

	retval = au0828_v4l2_device_register(interface, dev);
	if (retval) {
		au0828_usb_v4l2_media_release(dev);
		mutex_unlock(&dev->lock);
		kfree(dev);
		return retval;
	}

	/* Power Up the bridge */
	au0828_write(dev, REG_600, 1 << 4);

	/* Bring up the GPIO's and supporting devices */
	au0828_gpio_setup(dev);

	/* I2C */
	au0828_i2c_register(dev);

	/* Setup */
	au0828_card_setup(dev);

	/* Analog TV */
	retval = au0828_analog_register(dev, interface);
	if (retval) {
		pr_err("%s() au0282_dev_register failed to register on V4L2\n",
			__func__);
		goto done;
	}

	/* Digital TV */
	retval = au0828_dvb_register(dev);
	if (retval)
		pr_err("%s() au0282_dev_register failed\n",
		       __func__);

	/* Remote controller */
	au0828_rc_register(dev);

	/*
	 * Store the pointer to the au0828_dev so it can be accessed in
	 * au0828_usb_disconnect
	 */
	usb_set_intfdata(interface, dev);

	pr_info("Registered device AU0828 [%s]\n",
		dev->board.name == NULL ? "Unset" : dev->board.name);

	mutex_unlock(&dev->lock);

	retval = au0828_media_device_register(dev, usbdev);

done:
	if (retval < 0)
		au0828_usb_disconnect(interface);

	return retval;
}

static int au0828_suspend(struct usb_interface *interface,
				pm_message_t message)
{
	struct au0828_dev *dev = usb_get_intfdata(interface);

	if (!dev)
		return 0;

	pr_info("Suspend\n");

	au0828_rc_suspend(dev);
	au0828_v4l2_suspend(dev);
	au0828_dvb_suspend(dev);

	/* FIXME: should suspend also ATV/DTV */

	return 0;
}

static int au0828_resume(struct usb_interface *interface)
{
	struct au0828_dev *dev = usb_get_intfdata(interface);
	if (!dev)
		return 0;

	pr_info("Resume\n");

	/* Power Up the bridge */
	au0828_write(dev, REG_600, 1 << 4);

	/* Bring up the GPIO's and supporting devices */
	au0828_gpio_setup(dev);

	au0828_rc_resume(dev);
	au0828_v4l2_resume(dev);
	au0828_dvb_resume(dev);

	/* FIXME: should resume also ATV/DTV */

	return 0;
}

static struct usb_driver au0828_usb_driver = {
	.name		= KBUILD_MODNAME,
	.probe		= au0828_usb_probe,
	.disconnect	= au0828_usb_disconnect,
	.id_table	= au0828_usb_id_table,
	.suspend	= au0828_suspend,
	.resume		= au0828_resume,
	.reset_resume	= au0828_resume,
};

static int __init au0828_init(void)
{
	int ret;

	if (au0828_debug & 1)
		pr_info("%s() Debugging is enabled\n", __func__);

	if (au0828_debug & 2)
		pr_info("%s() USB Debugging is enabled\n", __func__);

	if (au0828_debug & 4)
		pr_info("%s() I2C Debugging is enabled\n", __func__);

	if (au0828_debug & 8)
		pr_info("%s() Bridge Debugging is enabled\n",
		       __func__);

	if (au0828_debug & 16)
		pr_info("%s() IR Debugging is enabled\n",
		       __func__);

	pr_info("au0828 driver loaded\n");

	ret = usb_register(&au0828_usb_driver);
	if (ret)
		pr_err("usb_register failed, error = %d\n", ret);

	return ret;
}

static void __exit au0828_exit(void)
{
	usb_deregister(&au0828_usb_driver);
}

module_init(au0828_init);
module_exit(au0828_exit);

MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.0.3");