openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/dma/dmatest.c

1082 lines
28 KiB
C
Raw Normal View History

dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
/*
* DMA Engine test module
*
* Copyright (C) 2007 Atmel Corporation
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
* Copyright (C) 2013 Intel Corporation
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
#include <linux/delay.h>
net: remove mm.h inclusion from netdevice.h Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-16 19:01:34 +08:00
#include <linux/dma-mapping.h>
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
#include <linux/dmaengine.h>
dmatest: make dmatest threads freezable Making dmatest threads freezable allows its use for system PM testing. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-18 22:50:51 +08:00
#include <linux/freezer.h>
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
#include <linux/init.h>
#include <linux/kthread.h>
sched/headers: Prepare to move the get_task_struct()/put_task_struct() and related APIs from <linux/sched.h> to <linux/sched/task.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-05 22:30:50 +08:00
#include <linux/sched/task.h>
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/random.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
#include <linux/wait.h>
static unsigned int test_buf_size = 16384;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(test_buf_size, uint, S_IRUGO | S_IWUSR);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer");
dmaengine: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-12 04:12:33 +08:00
static char test_channel[20];
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param_string(channel, test_channel, sizeof(test_channel),
S_IRUGO | S_IWUSR);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)");
DMA: dmatest: extend the "device" module parameter to 32 characters With Device Tree a typical DMA controller device name can look like 10000000.dma-controller, which extends the current size of the string, allocated for this parameter. This patch extends its size from 20 to 32 characters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-30 21:58:04 +08:00
static char test_device[32];
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param_string(device, test_device, sizeof(test_device),
S_IRUGO | S_IWUSR);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)");
static unsigned int threads_per_chan = 1;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(threads_per_chan, uint, S_IRUGO | S_IWUSR);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
MODULE_PARM_DESC(threads_per_chan,
"Number of threads to start per channel (default: 1)");
static unsigned int max_channels;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(max_channels, uint, S_IRUGO | S_IWUSR);
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
MODULE_PARM_DESC(max_channels,
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
"Maximum number of channels to use (default: all)");
dmaengine: dmatest: add a maximum number of test iterations The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 01:26:51 +08:00
static unsigned int iterations;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(iterations, uint, S_IRUGO | S_IWUSR);
dmaengine: dmatest: add a maximum number of test iterations The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 01:26:51 +08:00
MODULE_PARM_DESC(iterations,
"Iterations before stopping test (default: infinite)");
dmaengine: dmatest: Restore "memcpy" as default mode Commit 0d4cb44da6ca0e8 ("dmaengine: dmatest: Add support for scatter-gather DMA mode") changes default "dmatest" behavior by changing default mode from "memcpy" to "scatter-gather". Now "memcpy" gets back as default mode. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-15 01:40:38 +08:00
static unsigned int dmatest;
dmaengine: dmatest: Add support for scatter-gather DMA mode This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-09 23:40:14 +08:00
module_param(dmatest, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dmatest,
dmaengine: remove DMA_SG as it is dead code in kernel There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-22 01:23:13 +08:00
"dmatest 0-memcpy 1-memset (default: 0)");
dmaengine: dmatest: Add support for scatter-gather DMA mode This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-09 23:40:14 +08:00
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
static unsigned int xor_sources = 3;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(xor_sources, uint, S_IRUGO | S_IWUSR);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
MODULE_PARM_DESC(xor_sources,
"Number of xor source buffers (default: 3)");
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
static unsigned int pq_sources = 3;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(pq_sources, uint, S_IRUGO | S_IWUSR);
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
MODULE_PARM_DESC(pq_sources,
"Number of p+q source buffers (default: 3)");
dmaengine/dmatest: Pass timeout via module params When we try to test all channels present on our controller together, some channels of lower priority may be very slow as compared to others. If number of transfers is unlimited, some channels may timeout and will not finish within 3 seconds. Thus, while doing such regress testing we may need to have higher value of timeouts. This patch adds support for passing timeout value via module parameters. Default value is 3 msec, a negative value means max timeout possible. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-22 19:57:25 +08:00
static int timeout = 3000;
dmatest: make module parameters writable The debugfs interface brought a copy of the test case parameters. This makes different set of values under /sys/module/dmatest/parameters/ and /sys/kernel/debug/dmatest/. The user might be confused by the divergence of values. The proposed solution in this patch is to make module parameters writable and remove them from the debugfs. Though we're still using debugfs to control test runner and getting results. Documentation part is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Dan Williams <djbw@fb.com> Signed-off-by: Dan Williams <djbw@fb.com>
2013-07-23 23:36:46 +08:00
module_param(timeout, uint, S_IRUGO | S_IWUSR);
treewide: cleanup continuations and remove logging message whitespace Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-24 11:38:19 +08:00
MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), "
"Pass -1 for infinite timeout");
dmaengine/dmatest: Pass timeout via module params When we try to test all channels present on our controller together, some channels of lower priority may be very slow as compared to others. If number of transfers is unlimited, some channels may timeout and will not finish within 3 seconds. Thus, while doing such regress testing we may need to have higher value of timeouts. This patch adds support for passing timeout value via module parameters. Default value is 3 msec, a negative value means max timeout possible. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-22 19:57:25 +08:00
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
static bool noverify;
module_param(noverify, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(noverify, "Disable random data setup and verification");
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: verbose mode Verbose mode turns on test success messages, by default we only output test summaries and failure results. Also cleaned up some stray quotes, leftover from putting the result message format string all on one line. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-09 04:26:26 +08:00
static bool verbose;
module_param(verbose, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(verbose, "Enable \"success\" result messages (default: off)");
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
/**
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
* struct dmatest_params - test parameters.
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
* @buf_size: size of the memcpy test buffer
* @channel: bus ID of the channel to test
* @device: bus ID of the DMA Engine to test
* @threads_per_chan: number of threads to start per channel
* @max_channels: maximum number of channels to use
* @iterations: iterations before stopping test
* @xor_sources: number of xor source buffers
* @pq_sources: number of p+q source buffers
* @timeout: transfer timeout in msec, -1 for infinite timeout
*/
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
struct dmatest_params {
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
unsigned int buf_size;
char channel[20];
DMA: dmatest: extend the "device" module parameter to 32 characters With Device Tree a typical DMA controller device name can look like 10000000.dma-controller, which extends the current size of the string, allocated for this parameter. This patch extends its size from 20 to 32 characters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-30 21:58:04 +08:00
char device[32];
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
unsigned int threads_per_chan;
unsigned int max_channels;
unsigned int iterations;
unsigned int xor_sources;
unsigned int pq_sources;
int timeout;
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
bool noverify;
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
};
/**
* struct dmatest_info - test information.
* @params: test parameters
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
* @lock: access protection to the fields of this structure
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
*/
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
static struct dmatest_info {
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
/* Test parameters */
struct dmatest_params params;
dmatest: move dmatest_channels and nr_channels to dmatest_info We don't need to have them global and later we would like to protect access to them as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:28 +08:00
/* Internal state */
struct list_head channels;
unsigned int nr_channels;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
struct mutex lock;
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
bool did_init;
} test_info = {
.channels = LIST_HEAD_INIT(test_info.channels),
.lock = __MUTEX_INITIALIZER(test_info.lock),
};
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
static int dmatest_run_set(const char *val, const struct kernel_param *kp);
static int dmatest_run_get(char *val, const struct kernel_param *kp);
kernel/params: constify struct kernel_param_ops uses Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-27 09:39:38 +08:00
static const struct kernel_param_ops run_ops = {
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
.set = dmatest_run_set,
.get = dmatest_run_get,
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
};
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
static bool dmatest_run;
module_param_cb(run, &run_ops, &dmatest_run, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(run, "Run the test (default: false)");
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
/* Maximum amount of mismatched bytes in buffer to print */
#define MAX_ERROR_COUNT 32
/*
* Initialization patterns. All bytes in the source buffer has bit 7
* set, all bytes in the destination buffer has bit 7 cleared.
*
* Bit 6 is set for all bytes which are to be copied by the DMA
* engine. Bit 5 is set for all bytes which are to be overwritten by
* the DMA engine.
*
* The remaining bits are the inverse of a counter which increments by
* one for each byte address.
*/
#define PATTERN_SRC 0x80
#define PATTERN_DST 0x00
#define PATTERN_COPY 0x40
#define PATTERN_OVERWRITE 0x20
#define PATTERN_COUNT_MASK 0x1f
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
#define PATTERN_MEMSET_IDX 0x01
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
struct dmatest_thread {
struct list_head node;
struct dmatest_info *info;
struct task_struct *task;
struct dma_chan *chan;
u8 **srcs;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
u8 **usrcs;
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
u8 **dsts;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
u8 **udsts;
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
enum dma_transaction_type type;
bool done;
};
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
struct dmatest_chan {
struct list_head node;
struct dma_chan *chan;
struct list_head threads;
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
};
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
static DECLARE_WAIT_QUEUE_HEAD(thread_wait);
static bool wait;
static bool is_threaded_test_run(struct dmatest_info *info)
{
struct dmatest_chan *dtc;
list_for_each_entry(dtc, &info->channels, node) {
struct dmatest_thread *thread;
list_for_each_entry(thread, &dtc->threads, node) {
if (!thread->done)
return true;
}
}
return false;
}
static int dmatest_wait_get(char *val, const struct kernel_param *kp)
{
struct dmatest_info *info = &test_info;
struct dmatest_params *params = &info->params;
if (params->iterations)
wait_event(thread_wait, !is_threaded_test_run(info));
wait = true;
return param_get_bool(val, kp);
}
kernel/params: constify struct kernel_param_ops uses Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-27 09:39:38 +08:00
static const struct kernel_param_ops wait_ops = {
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
.get = dmatest_wait_get,
.set = param_set_bool,
};
module_param_cb(wait, &wait_ops, &wait, S_IRUGO);
MODULE_PARM_DESC(wait, "Wait for tests to complete (default: false)");
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
static bool dmatest_match_channel(struct dmatest_params *params,
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
struct dma_chan *chan)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
if (params->channel[0] == '\0')
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
return true;
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
return strcmp(dma_chan_name(chan), params->channel) == 0;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
static bool dmatest_match_device(struct dmatest_params *params,
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
struct dma_device *device)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
if (params->device[0] == '\0')
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
return true;
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
return strcmp(dev_name(device->dev), params->device) == 0;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
static unsigned long dmatest_random(void)
{
unsigned long buf;
dmatest: use pseudo random numbers There is no need for dmatest to drain the entropy pool. It would be nice to one day have repeatable runs, but would need a larger rework to synchronize and order calls to the rng across test threads. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:03 +08:00
prandom_bytes(&buf, sizeof(buf));
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
return buf;
}
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
static inline u8 gen_inv_idx(u8 index, bool is_memset)
{
u8 val = is_memset ? PATTERN_MEMSET_IDX : index;
return ~val & PATTERN_COUNT_MASK;
}
static inline u8 gen_src_value(u8 index, bool is_memset)
{
return PATTERN_SRC | gen_inv_idx(index, is_memset);
}
static inline u8 gen_dst_value(u8 index, bool is_memset)
{
return PATTERN_DST | gen_inv_idx(index, is_memset);
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
unsigned int buf_size, bool is_memset)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
unsigned int i;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
u8 *buf;
for (; (buf = *bufs); bufs++) {
for (i = 0; i < start; i++)
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
buf[i] = gen_src_value(i, is_memset);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
for ( ; i < start + len; i++)
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
buf[i] = gen_src_value(i, is_memset) | PATTERN_COPY;
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
for ( ; i < buf_size; i++)
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
buf[i] = gen_src_value(i, is_memset);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
buf++;
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
unsigned int buf_size, bool is_memset)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
unsigned int i;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
u8 *buf;
for (; (buf = *bufs); bufs++) {
for (i = 0; i < start; i++)
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
buf[i] = gen_dst_value(i, is_memset);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
for ( ; i < start + len; i++)
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
buf[i] = gen_dst_value(i, is_memset) |
PATTERN_OVERWRITE;
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
for ( ; i < buf_size; i++)
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
buf[i] = gen_dst_value(i, is_memset);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
static void dmatest_mismatch(u8 actual, u8 pattern, unsigned int index,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
unsigned int counter, bool is_srcbuf, bool is_memset)
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
{
u8 diff = actual ^ pattern;
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
u8 expected = pattern | gen_inv_idx(counter, is_memset);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
const char *thread_name = current->comm;
if (is_srcbuf)
pr_warn("%s: srcbuf[0x%x] overwritten! Expected %02x, got %02x\n",
thread_name, index, expected, actual);
else if ((pattern & PATTERN_COPY)
&& (diff & (PATTERN_COPY | PATTERN_OVERWRITE)))
pr_warn("%s: dstbuf[0x%x] not copied! Expected %02x, got %02x\n",
thread_name, index, expected, actual);
else if (diff & PATTERN_SRC)
pr_warn("%s: dstbuf[0x%x] was copied! Expected %02x, got %02x\n",
thread_name, index, expected, actual);
else
pr_warn("%s: dstbuf[0x%x] mismatch! Expected %02x, got %02x\n",
thread_name, index, expected, actual);
}
static unsigned int dmatest_verify(u8 **bufs, unsigned int start,
unsigned int end, unsigned int counter, u8 pattern,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
bool is_srcbuf, bool is_memset)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
unsigned int i;
unsigned int error_count = 0;
u8 actual;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
u8 expected;
u8 *buf;
unsigned int counter_orig = counter;
for (; (buf = *bufs); bufs++) {
counter = counter_orig;
for (i = start; i < end; i++) {
actual = buf[i];
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
expected = pattern | gen_inv_idx(counter, is_memset);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
if (actual != expected) {
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
if (error_count < MAX_ERROR_COUNT)
dmatest_mismatch(actual, pattern, i,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
counter, is_srcbuf,
is_memset);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
error_count++;
}
counter++;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
}
dmatest: define MAX_ERROR_COUNT constant Its meaning is to limit amount of error messages to be printed out when buffer mismatch is occured. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:32 +08:00
if (error_count > MAX_ERROR_COUNT)
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
pr_warn("%s: %u errors suppressed\n",
dmatest: define MAX_ERROR_COUNT constant Its meaning is to limit amount of error messages to be printed out when buffer mismatch is occured. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:32 +08:00
current->comm, error_count - MAX_ERROR_COUNT);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
return error_count;
}
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
/* poor man's completion - we want to use wait_event_freezable() on it */
struct dmatest_done {
bool done;
wait_queue_head_t *wait;
};
static void dmatest_callback(void *arg)
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
{
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
struct dmatest_done *done = arg;
done->done = true;
wake_up_all(done->wait);
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
dmatest: adjust invalid module parameters for number of source buffers DMA Engine test module has module parameters to set the number of source buffers for xor and pq operations. We can set these values larger than the maximum number of sources that the device can support. These values are not adjusted and the unsupported number of source buffers are passed to the device. But most drivers don't check it, so unexpected results will happen. This makes an appropriate adjustment for these module parameters before use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-27 23:49:32 +08:00
static unsigned int min_odd(unsigned int x, unsigned int y)
{
unsigned int val = min(x, y);
return val % 2 ? val : val - 1;
}
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
static void result(const char *err, unsigned int n, unsigned int src_off,
unsigned int dst_off, unsigned int len, unsigned long data)
dmatest: append verify result to results Comparison between buffers is stored to the dedicated structure. Note that the verify result is now accessible only via file 'results' in the debugfs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:34 +08:00
{
Add new line to test result strings produced in verbose mode Prevents test result strings from being output on same line. Issue will happen with verbose and multi-iteration modes enabled. Signed-off-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-04 17:38:55 +08:00
pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n",
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
current->comm, n, err, src_off, dst_off, len, data);
dmatest: append verify result to results Comparison between buffers is stored to the dedicated structure. Note that the verify result is now accessible only via file 'results' in the debugfs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:34 +08:00
}
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
static void dbg_result(const char *err, unsigned int n, unsigned int src_off,
unsigned int dst_off, unsigned int len,
unsigned long data)
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
{
Add new line to test result strings produced in verbose mode Prevents test result strings from being output on same line. Issue will happen with verbose and multi-iteration modes enabled. Signed-off-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-04 17:38:55 +08:00
pr_debug("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n",
dmatest: fix indentation Simple fixes an indentation in few places across the code. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-22 21:16:42 +08:00
current->comm, n, err, src_off, dst_off, len, data);
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
}
dmatest: fix indentation Simple fixes an indentation in few places across the code. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-22 21:16:42 +08:00
#define verbose_result(err, n, src_off, dst_off, len, data) ({ \
if (verbose) \
result(err, n, src_off, dst_off, len, data); \
else \
dbg_result(err, n, src_off, dst_off, len, data);\
dmatest: verbose mode Verbose mode turns on test success messages, by default we only output test summaries and failure results. Also cleaned up some stray quotes, leftover from putting the result message format string all on one line. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-09 04:26:26 +08:00
})
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
static unsigned long long dmatest_persec(s64 runtime, unsigned int val)
dmatest: append verify result to results Comparison between buffers is stored to the dedicated structure. Note that the verify result is now accessible only via file 'results' in the debugfs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:34 +08:00
{
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
unsigned long long per_sec = 1000000;
dmatest: append verify result to results Comparison between buffers is stored to the dedicated structure. Note that the verify result is now accessible only via file 'results' in the debugfs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:34 +08:00
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
if (runtime <= 0)
return 0;
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
/* drop precision until runtime is 32-bits */
while (runtime > UINT_MAX) {
runtime >>= 1;
per_sec <<= 1;
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
}
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
per_sec *= val;
do_div(per_sec, runtime);
return per_sec;
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
}
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
static unsigned long long dmatest_KBs(s64 runtime, unsigned long long len)
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
{
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
return dmatest_persec(runtime, len >> 10);
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
/*
* This function repeatedly tests DMA transfers of various lengths and
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
* offsets for a given operation type until it is told to exit by
* kthread_stop(). There may be multiple threads running this function
* in parallel for a single channel, and there may be multiple channels
* being tested in parallel.
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
*
* Before each test, the source and destination buffer is initialized
* with a known pattern. This pattern is different depending on
* whether it's in an area which is supposed to be copied or
* overwritten, and different in the source and destination buffers.
* So if the DMA engine doesn't copy exactly what we tell it to copy,
* we'll notice.
*/
static int dmatest_func(void *data)
{
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_wait);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
struct dmatest_thread *thread = data;
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
struct dmatest_done done = { .wait = &done_wait };
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
struct dmatest_info *info;
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
struct dmatest_params *params;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
struct dma_chan *chan;
dmatest: adjust invalid module parameters for number of source buffers DMA Engine test module has module parameters to set the number of source buffers for xor and pq operations. We can set these values larger than the maximum number of sources that the device can support. These values are not adjusted and the unsupported number of source buffers are passed to the device. But most drivers don't check it, so unexpected results will happen. This makes an appropriate adjustment for these module parameters before use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-27 23:49:32 +08:00
struct dma_device *dev;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
unsigned int error_count;
unsigned int failed_tests = 0;
unsigned int total_tests = 0;
dma_cookie_t cookie;
enum dma_status status;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
enum dma_ctrl_flags flags;
dmatest: allocate memory for pq_coefs from heap This will help in future to hide a global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:26 +08:00
u8 *pq_coefs = NULL;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
int ret;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
int src_cnt;
int dst_cnt;
int i;
dmaengine: dmatest: exclude compare and fill time during perf report Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-01 22:02:55 +08:00
ktime_t ktime, start, diff;
ktime: Cleanup ktime_set() usage ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 19:30:41 +08:00
ktime_t filltime = 0;
ktime_t comparetime = 0;
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
s64 runtime = 0;
unsigned long long total_len = 0;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
u8 align = 0;
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
bool is_memset = false;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
set_freezable();
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
ret = -ENOMEM;
smp_rmb();
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
info = thread->info;
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
params = &info->params;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
chan = thread->chan;
dmatest: adjust invalid module parameters for number of source buffers DMA Engine test module has module parameters to set the number of source buffers for xor and pq operations. We can set these values larger than the maximum number of sources that the device can support. These values are not adjusted and the unsupported number of source buffers are passed to the device. But most drivers don't check it, so unexpected results will happen. This makes an appropriate adjustment for these module parameters before use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-27 23:49:32 +08:00
dev = chan->device;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
if (thread->type == DMA_MEMCPY) {
align = dev->copy_align;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
src_cnt = dst_cnt = 1;
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
} else if (thread->type == DMA_MEMSET) {
align = dev->fill_align;
src_cnt = dst_cnt = 1;
is_memset = true;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
} else if (thread->type == DMA_XOR) {
dmatest: adjust invalid module parameters for number of source buffers DMA Engine test module has module parameters to set the number of source buffers for xor and pq operations. We can set these values larger than the maximum number of sources that the device can support. These values are not adjusted and the unsupported number of source buffers are passed to the device. But most drivers don't check it, so unexpected results will happen. This makes an appropriate adjustment for these module parameters before use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-27 23:49:32 +08:00
/* force odd to ensure dst = src */
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
src_cnt = min_odd(params->xor_sources | 1, dev->max_xor);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dst_cnt = 1;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
align = dev->xor_align;
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
} else if (thread->type == DMA_PQ) {
dmatest: adjust invalid module parameters for number of source buffers DMA Engine test module has module parameters to set the number of source buffers for xor and pq operations. We can set these values larger than the maximum number of sources that the device can support. These values are not adjusted and the unsupported number of source buffers are passed to the device. But most drivers don't check it, so unexpected results will happen. This makes an appropriate adjustment for these module parameters before use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-27 23:49:32 +08:00
/* force odd to ensure dst = src */
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
src_cnt = min_odd(params->pq_sources | 1, dma_maxpq(dev, 0));
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
dst_cnt = 2;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
align = dev->pq_align;
dmatest: allocate memory for pq_coefs from heap This will help in future to hide a global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:26 +08:00
dmaengine: fix spacing issues for dmatest Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:01 +08:00
pq_coefs = kmalloc(params->pq_sources + 1, GFP_KERNEL);
dmatest: allocate memory for pq_coefs from heap This will help in future to hide a global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:26 +08:00
if (!pq_coefs)
goto err_thread_type;
dmatest: correct raid6 PQ test The number of PQ sources specified by module parameter "pq_sources" is always forced odd to fit into dmatest's destination verificaton scheme. But number of PQ sources and coefficients as passed to the driver's prep_dma_pq() is not adjusted accordingly. Fix it now to get correct PQ testing results in the case passed "pq_sources" parameter is even. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-16 05:35:23 +08:00
for (i = 0; i < src_cnt; i++)
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
pq_coefs[i] = 1;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
} else
dmatest: allocate memory for pq_coefs from heap This will help in future to hide a global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:26 +08:00
goto err_thread_type;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dmaengine: fix spacing issues for dmatest Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:01 +08:00
thread->srcs = kcalloc(src_cnt + 1, sizeof(u8 *), GFP_KERNEL);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
if (!thread->srcs)
goto err_srcs;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
thread->usrcs = kcalloc(src_cnt + 1, sizeof(u8 *), GFP_KERNEL);
if (!thread->usrcs)
goto err_usrcs;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
for (i = 0; i < src_cnt; i++) {
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
thread->usrcs[i] = kmalloc(params->buf_size + align,
GFP_KERNEL);
if (!thread->usrcs[i])
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
goto err_srcbuf;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
/* align srcs to alignment restriction */
if (align)
thread->srcs[i] = PTR_ALIGN(thread->usrcs[i], align);
else
thread->srcs[i] = thread->usrcs[i];
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
thread->srcs[i] = NULL;
dmaengine: fix spacing issues for dmatest Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:01 +08:00
thread->dsts = kcalloc(dst_cnt + 1, sizeof(u8 *), GFP_KERNEL);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
if (!thread->dsts)
goto err_dsts;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
thread->udsts = kcalloc(dst_cnt + 1, sizeof(u8 *), GFP_KERNEL);
if (!thread->udsts)
goto err_udsts;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
for (i = 0; i < dst_cnt; i++) {
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
thread->udsts[i] = kmalloc(params->buf_size + align,
GFP_KERNEL);
if (!thread->udsts[i])
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
goto err_dstbuf;
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
/* align dsts to alignment restriction */
if (align)
thread->dsts[i] = PTR_ALIGN(thread->udsts[i], align);
else
thread->dsts[i] = thread->udsts[i];
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
thread->dsts[i] = NULL;
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
set_user_nice(current, 10);
dmatest: fix automatic buffer unmap type The dmatest code relies on the DMAEngine API to automatically call dma_unmap_single() on src buffers. The flags it passes are incorrect, fix them. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-03 15:54:53 +08:00
/*
dmatest: make driver unmap also source buffers by itself Make the driver DMA unmap also source buffers by itself (currently it DMA unmaps only destination buffers) as a preparation for introducing generic 'ummap' data. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-10-19 01:35:21 +08:00
* src and dst buffers are freed by ourselves below
dmatest: fix automatic buffer unmap type The dmatest code relies on the DMAEngine API to automatically call dma_unmap_single() on src buffers. The flags it passes are incorrect, fix them. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-03 15:54:53 +08:00
*/
dmaengine: remove DMA unmap flags Remove no longer needed DMA unmap flags: - DMA_COMPL_SKIP_SRC_UNMAP - DMA_COMPL_SKIP_DEST_UNMAP - DMA_COMPL_SRC_UNMAP_SINGLE - DMA_COMPL_DEST_UNMAP_SINGLE Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> Acked-by: Mark Brown <broonie@linaro.org> [djbw: clean up straggling skip unmap flags in ntb] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-10-19 01:35:33 +08:00
flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
ktime = ktime_get();
dmaengine: dmatest: add a maximum number of test iterations The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 01:26:51 +08:00
while (!kthread_should_stop()
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
&& !(params->iterations && total_tests >= params->iterations)) {
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
struct dma_async_tx_descriptor *tx = NULL;
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
struct dmaengine_unmap_data *um;
dma_addr_t srcs[src_cnt];
dma_addr_t *dsts;
dmatest: move src_off, dst_off, len inside loop The scope of those varsiables is in while-loop. This patch moves them there and removes duplicate code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-22 21:16:43 +08:00
unsigned int src_off, dst_off, len;
dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14 00:22:20 +08:00
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
total_tests++;
dmaengine: dmatest: Add check for supported buffer count (sg_buffers) When using dmatest with sg_buffers=128 I stumbled upon the problem, that the "map_cnt" variable of "struct dmaengine_unmap_data" was set to 0. "map_cnt" is an "u8" variable, resulting in an overrun when its value is set to src_cnt + dst_cnt, to twice the sg_buffer value. This patch adds a small check to dmatest, so that this confusing error is detected and the test is aborted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Kedareswara rao Appana <appanad@xilinx.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-04-27 20:21:41 +08:00
/* Check if buffer count fits into map count variable (u8) */
if ((src_cnt + dst_cnt) >= 255) {
pr_err("too many buffers (%d of 255 supported)\n",
src_cnt + dst_cnt);
break;
}
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
if (1 << align > params->buf_size) {
dmaengine: fix dmatest to verify minimum transfer length and test buffer size Transfers and the test buffer have to be at least align bytes long. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-05 02:44:48 +08:00
pr_err("%u-byte buffer too small for %d-byte alignment\n",
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
params->buf_size, 1 << align);
dmaengine: fix dmatest to verify minimum transfer length and test buffer size Transfers and the test buffer have to be at least align bytes long. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-05 02:44:48 +08:00
break;
}
dmatest: move src_off, dst_off, len inside loop The scope of those varsiables is in while-loop. This patch moves them there and removes duplicate code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-22 21:16:43 +08:00
if (params->noverify)
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
len = params->buf_size;
dmatest: move src_off, dst_off, len inside loop The scope of those varsiables is in while-loop. This patch moves them there and removes duplicate code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-22 21:16:43 +08:00
else
len = dmatest_random() % params->buf_size + 1;
len = (len >> align) << align;
if (!len)
len = 1 << align;
total_len += len;
if (params->noverify) {
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
src_off = 0;
dst_off = 0;
} else {
dmaengine: dmatest: exclude compare and fill time during perf report Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-01 22:02:55 +08:00
start = ktime_get();
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
src_off = dmatest_random() % (params->buf_size - len + 1);
dst_off = dmatest_random() % (params->buf_size - len + 1);
src_off = (src_off >> align) << align;
dst_off = (dst_off >> align) << align;
dmatest_init_srcs(thread->srcs, src_off, len,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
params->buf_size, is_memset);
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
dmatest_init_dsts(thread->dsts, dst_off, len,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
params->buf_size, is_memset);
dmaengine: dmatest: exclude compare and fill time during perf report Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-01 22:02:55 +08:00
diff = ktime_sub(ktime_get(), start);
filltime = ktime_add(filltime, diff);
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
}
dmaengine: fix spacing issues for dmatest Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:01 +08:00
um = dmaengine_get_unmap_data(dev->dev, src_cnt + dst_cnt,
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
GFP_KERNEL);
if (!um) {
failed_tests++;
result("unmap data NULL", total_tests,
src_off, dst_off, len, ret);
continue;
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
um->len = params->buf_size;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
for (i = 0; i < src_cnt; i++) {
dmatest: fix build warning on mips drivers/dma/dmatest.c:543:11: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default] mips expects virt_to_phys() to take a pointer. Fix up the types accordingly. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-10 03:16:01 +08:00
void *buf = thread->srcs[i];
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
struct page *pg = virt_to_page(buf);
dmaengine: dmatest: use offset_in_page() macro Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-04-22 09:18:03 +08:00
unsigned long pg_off = offset_in_page(buf);
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
um->addr[i] = dma_map_page(dev->dev, pg, pg_off,
um->len, DMA_TO_DEVICE);
srcs[i] = um->addr[i] + src_off;
ret = dma_mapping_error(dev->dev, um->addr[i]);
dmatest: check for dma mapping error The kernel emits a warning if CONFIG_DMA_API_DEBUG=y: WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac() dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x0000000035698305] [size=14365 bytes] [mapped as single] Fix this by adding the required checking of the dma_map_single() return value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:53 +08:00
if (ret) {
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result("src mapping error", total_tests,
src_off, dst_off, len, ret);
dmatest: check for dma mapping error The kernel emits a warning if CONFIG_DMA_API_DEBUG=y: WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac() dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x0000000035698305] [size=14365 bytes] [mapped as single] Fix this by adding the required checking of the dma_map_single() return value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:53 +08:00
failed_tests++;
continue;
}
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
um->to_cnt++;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14 00:22:20 +08:00
/* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dsts = &um->addr[src_cnt];
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
for (i = 0; i < dst_cnt; i++) {
dmatest: fix build warning on mips drivers/dma/dmatest.c:543:11: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default] mips expects virt_to_phys() to take a pointer. Fix up the types accordingly. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-10 03:16:01 +08:00
void *buf = thread->dsts[i];
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
struct page *pg = virt_to_page(buf);
dmaengine: dmatest: use offset_in_page() macro Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-04-22 09:18:03 +08:00
unsigned long pg_off = offset_in_page(buf);
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dsts[i] = dma_map_page(dev->dev, pg, pg_off, um->len,
DMA_BIDIRECTIONAL);
ret = dma_mapping_error(dev->dev, dsts[i]);
dmatest: check for dma mapping error The kernel emits a warning if CONFIG_DMA_API_DEBUG=y: WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac() dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x0000000035698305] [size=14365 bytes] [mapped as single] Fix this by adding the required checking of the dma_map_single() return value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:53 +08:00
if (ret) {
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result("dst mapping error", total_tests,
src_off, dst_off, len, ret);
dmatest: check for dma mapping error The kernel emits a warning if CONFIG_DMA_API_DEBUG=y: WARNING: at lib/dma-debug.c:933 check_unmap+0x5d6/0x6ac() dw_dmac dw_dmac.0: DMA-API: device driver failed to check map error[device address=0x0000000035698305] [size=14365 bytes] [mapped as single] Fix this by adding the required checking of the dma_map_single() return value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:53 +08:00
failed_tests++;
continue;
}
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
um->bidi_cnt++;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
if (thread->type == DMA_MEMCPY)
tx = dev->device_prep_dma_memcpy(chan,
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dsts[0] + dst_off,
srcs[0], len, flags);
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
else if (thread->type == DMA_MEMSET)
tx = dev->device_prep_dma_memset(chan,
dsts[0] + dst_off,
*(thread->srcs[0] + src_off),
len, flags);
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
else if (thread->type == DMA_XOR)
tx = dev->device_prep_dma_xor(chan,
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dsts[0] + dst_off,
srcs, src_cnt,
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
len, flags);
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
else if (thread->type == DMA_PQ) {
dma_addr_t dma_pq[dst_cnt];
for (i = 0; i < dst_cnt; i++)
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dma_pq[i] = dsts[i] + dst_off;
tx = dev->device_prep_dma_pq(chan, dma_pq, srcs,
dmatest: correct raid6 PQ test The number of PQ sources specified by module parameter "pq_sources" is always forced odd to fit into dmatest's destination verificaton scheme. But number of PQ sources and coefficients as passed to the driver's prep_dma_pq() is not adjusted accordingly. Fix it now to get correct PQ testing results in the case passed "pq_sources" parameter is even. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-16 05:35:23 +08:00
src_cnt, pq_coefs,
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
len, flags);
}
dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14 00:22:20 +08:00
if (!tx) {
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result("prep error", total_tests, src_off,
dst_off, len, ret);
dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14 00:22:20 +08:00
msleep(100);
failed_tests++;
continue;
}
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
done.done = false;
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
tx->callback = dmatest_callback;
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
tx->callback_param = &done;
dmatest: Use custom map/unmap for destination buffer The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer to ensure that the poison values are written to RAM and not just written to cache and discarded. Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14 00:22:20 +08:00
cookie = tx->tx_submit(tx);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
if (dma_submit_error(cookie)) {
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result("submit error", total_tests, src_off,
dst_off, len, ret);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
msleep(100);
failed_tests++;
continue;
}
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dma_async_issue_pending(chan);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: do not allow to interrupt ongoing tests When user interrupts ongoing transfers the dmatest may end up with console lockup, oops, or data mismatch. This patch prevents user to abort any ongoing test. Documentation is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-23 19:29:53 +08:00
wait_event_freezable_timeout(done_wait, done.done,
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
msecs_to_jiffies(params->timeout));
dmatest: make dmatest threads freezable Making dmatest threads freezable allows its use for system PM testing. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-18 22:50:51 +08:00
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: don't use set_freezable_with_signal() Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-24 01:28:16 +08:00
if (!done.done) {
/*
* We're leaving the timed out dma operation with
* dangling pointer to done_wait. To make this
* correct, we'll need to allocate wait_done for
* each test iteration and perform "who's gonna
* free it this time?" dancing. For now, just
* leave it dangling.
*/
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result("test timed out", total_tests, src_off, dst_off,
len, 0);
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
failed_tests++;
continue;
dmaengine: dmatest: use DMA_COMPLETE for dma completion status Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-16 16:07:27 +08:00
} else if (status != DMA_COMPLETE) {
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result(status == DMA_ERROR ?
"completion error status" :
"completion busy status", total_tests, src_off,
dst_off, len, ret);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
failed_tests++;
continue;
}
dmatest: add dma interrupts and callbacks Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dmatest: convert to dmaengine_unmap_data Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:10 +08:00
dmaengine_unmap_put(um);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
if (params->noverify) {
dmatest: verbose mode Verbose mode turns on test success messages, by default we only output test summaries and failure results. Also cleaned up some stray quotes, leftover from putting the result message format string all on one line. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-09 04:26:26 +08:00
verbose_result("test passed", total_tests, src_off,
dst_off, len, 0);
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
continue;
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmaengine: dmatest: exclude compare and fill time during perf report Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-01 22:02:55 +08:00
start = ktime_get();
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
pr_debug("%s: verifying source buffer...\n", current->comm);
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
error_count = dmatest_verify(thread->srcs, 0, src_off,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
0, PATTERN_SRC, true, is_memset);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
error_count += dmatest_verify(thread->srcs, src_off,
src_off + len, src_off,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
PATTERN_SRC | PATTERN_COPY, true, is_memset);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
error_count += dmatest_verify(thread->srcs, src_off + len,
params->buf_size, src_off + len,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
PATTERN_SRC, true, is_memset);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
pr_debug("%s: verifying dest buffer...\n", current->comm);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
error_count += dmatest_verify(thread->dsts, 0, dst_off,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
0, PATTERN_DST, false, is_memset);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
error_count += dmatest_verify(thread->dsts, dst_off,
dst_off + len, src_off,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
PATTERN_SRC | PATTERN_COPY, false, is_memset);
Revert "dmatest: append verify result to results" This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:57 +08:00
error_count += dmatest_verify(thread->dsts, dst_off + len,
params->buf_size, dst_off + len,
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
PATTERN_DST, false, is_memset);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmaengine: dmatest: exclude compare and fill time during perf report Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-01 22:02:55 +08:00
diff = ktime_sub(ktime_get(), start);
comparetime = ktime_add(comparetime, diff);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
if (error_count) {
dmatest: replace stored results mechanism, with uniform messages For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:29:58 +08:00
result("data error", total_tests, src_off, dst_off,
len, error_count);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
failed_tests++;
} else {
dmatest: verbose mode Verbose mode turns on test success messages, by default we only output test summaries and failure results. Also cleaned up some stray quotes, leftover from putting the result message format string all on one line. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-09 04:26:26 +08:00
verbose_result("test passed", total_tests, src_off,
dst_off, len, 0);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
}
dmaengine: dmatest: exclude compare and fill time during perf report Dmatest is currently including compare and fill time into the calculated performance numbers. This does not reflect the HW capability and the results vary based on the CPU speed instead of the HW speed. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-01 22:02:55 +08:00
ktime = ktime_sub(ktime_get(), ktime);
ktime = ktime_sub(ktime, comparetime);
ktime = ktime_sub(ktime, filltime);
runtime = ktime_to_us(ktime);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
ret = 0;
dmatest: prevent memory leakage on error path in thread When we fail to allocate memory for thread->srcs or thread->dsts and src_cnt or dst_cnt great than 1 we leak memory on error path. This patch fixes the issue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-08-22 20:19:44 +08:00
err_dstbuf:
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
for (i = 0; thread->udsts[i]; i++)
kfree(thread->udsts[i]);
kfree(thread->udsts);
err_udsts:
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
kfree(thread->dsts);
err_dsts:
dmatest: prevent memory leakage on error path in thread When we fail to allocate memory for thread->srcs or thread->dsts and src_cnt or dst_cnt great than 1 we leak memory on error path. This patch fixes the issue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-08-22 20:19:44 +08:00
err_srcbuf:
dmaengine: dmatest: honor alignment restriction for buffers Existing implementation does not honor the alignment restrictions imposed by the DMA engines. Allocate buffers with built in slack for honoring alignment restrictions. Creating new arrays to hold the aligned pointers and use those pointers for operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 04:22:20 +08:00
for (i = 0; thread->usrcs[i]; i++)
kfree(thread->usrcs[i]);
kfree(thread->usrcs);
err_usrcs:
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
kfree(thread->srcs);
err_srcs:
dmatest: allocate memory for pq_coefs from heap This will help in future to hide a global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:26 +08:00
kfree(pq_coefs);
err_thread_type:
dmatest: add basic performance metrics Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:07 +08:00
pr_info("%s: summary %u tests, %u failures %llu iops %llu KB/s (%d)\n",
current->comm, total_tests, failed_tests,
dmatest_persec(runtime, total_tests),
dmatest_KBs(runtime, total_len), ret);
dmaengine: dmatest: add a maximum number of test iterations The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 01:26:51 +08:00
dmaengine/dmatest: Terminate transfers on all channels in case of error or exit In case, some error occurs while doing memcpy transfers, we must terminate all transfers physically too. This is achieved by calling device_control() routine with TERMINATE_ALL as parameter. This is also required to be done in case module is removed while we are in middle of some transfers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-29 18:51:57 +08:00
/* terminate all transfers on specified channels */
dmaengine/dmatest: terminate transfers only in case of errors dmatest erroneously terminated transfers in normal cases also leading to test failures for multiple threads over a channel. Fix this and terminate transfers only in case of errors. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-11-09 23:26:29 +08:00
if (ret)
dmaengine_terminate_all(chan);
dmatest: return actual state in 'run' file The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run To wait for test done the user may perform a busy loop that checks the state. % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] > do > echo -n "." > sleep 1 > done > echo Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:31 +08:00
thread->done = true;
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
wake_up(&thread_wait);
dmaengine: dmatest: add a maximum number of test iterations The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-04 01:26:51 +08:00
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
return ret;
}
static void dmatest_cleanup_channel(struct dmatest_chan *dtc)
{
struct dmatest_thread *thread;
struct dmatest_thread *_thread;
int ret;
list_for_each_entry_safe(thread, _thread, &dtc->threads, node) {
ret = kthread_stop(thread->task);
dmatest: cleanup redundant "dmatest: " prefixes ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:00 +08:00
pr_debug("thread %s exited with status %d\n",
thread->task->comm, ret);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
list_del(&thread->node);
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
put_task_struct(thread->task);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
kfree(thread);
}
dmaengine/dmatest: Terminate transfers on all channels in case of error or exit In case, some error occurs while doing memcpy transfers, we must terminate all transfers physically too. This is achieved by calling device_control() routine with TERMINATE_ALL as parameter. This is also required to be done in case module is removed while we are in middle of some transfers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-29 18:51:57 +08:00
/* terminate all transfers on specified channels */
dmatest: Fix NULL pointer dereference on ioat device_control is an optional and not implemented in all DMA drivers. Any calls to these will result in a NULL pointer dereference. dmatest makes two of these calls when completing the kernel thread and removing the module. These are corrected by calling the dmaengine_device_control wrapper and checking for a non-existant device_control function pointer there. Signed-off-by: Jon Mason <jon.mason@intel.com> CC: Vinod Koul <vinod.koul@intel.com> CC: Dan Williams <djbw@fb.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-11-12 07:03:20 +08:00
dmaengine_terminate_all(dtc->chan);
dmaengine/dmatest: Terminate transfers on all channels in case of error or exit In case, some error occurs while doing memcpy transfers, we must terminate all transfers physically too. This is achieved by calling device_control() routine with TERMINATE_ALL as parameter. This is also required to be done in case module is removed while we are in middle of some transfers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-29 18:51:57 +08:00
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
kfree(dtc);
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
static int dmatest_add_threads(struct dmatest_info *info,
struct dmatest_chan *dtc, enum dma_transaction_type type)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
struct dmatest_params *params = &info->params;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
struct dmatest_thread *thread;
struct dma_chan *chan = dtc->chan;
char *op;
unsigned int i;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
if (type == DMA_MEMCPY)
op = "copy";
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
else if (type == DMA_MEMSET)
op = "set";
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
else if (type == DMA_XOR)
op = "xor";
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
else if (type == DMA_PQ)
op = "pq";
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
else
return -EINVAL;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
for (i = 0; i < params->threads_per_chan; i++) {
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL);
if (!thread) {
dmatest: cleanup redundant "dmatest: " prefixes ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:00 +08:00
pr_warn("No memory for %s-%s%u\n",
dma_chan_name(chan), op, i);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
break;
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
thread->info = info;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
thread->chan = dtc->chan;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
thread->type = type;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
smp_wmb();
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
thread->task = kthread_create(dmatest_func, thread, "%s-%s%u",
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dma_chan_name(chan), op, i);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
if (IS_ERR(thread->task)) {
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
pr_warn("Failed to create thread %s-%s%u\n",
dmatest: cleanup redundant "dmatest: " prefixes ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:00 +08:00
dma_chan_name(chan), op, i);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
kfree(thread);
break;
}
/* srcbuf and dstbuf are allocated by the thread itself */
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
get_task_struct(thread->task);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
list_add_tail(&thread->node, &dtc->threads);
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
wake_up_process(thread->task);
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
return i;
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
static int dmatest_add_channel(struct dmatest_info *info,
struct dma_chan *chan)
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
{
struct dmatest_chan *dtc;
struct dma_device *dma_dev = chan->device;
unsigned int thread_count = 0;
dma: dmatest: fix potential sign bug 'cnt' is unsigned, so this code may become wrong in future as dmatest_add_threads() can return error code: cnt = dmatest_add_threads(dtc, DMA_MEMCPY); thread_count += cnt > 0 ? cnt : 0; ^^^^^^^ Now it can return only -EINVAL if and only if second argument of dmatest_add_threads() is not one of DMA_MEMCPY, DMA_XOR, DMA_PQ. So, now it is not wrong but may become wrong in future. The semantic patch that finds this problem (many false-positive results): (http://coccinelle.lip6.fr/) // <smpl> @ r1 @ identifier f; @@ int f(...) { ... } @@ identifier r1.f; type T; unsigned T x; @@ *x = f(...) ... *x > 0 Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-07-17 23:19:48 +08:00
int cnt;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL);
if (!dtc) {
dmatest: cleanup redundant "dmatest: " prefixes ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:00 +08:00
pr_warn("No memory for %s\n", dma_chan_name(chan));
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
return -ENOMEM;
}
dtc->chan = chan;
INIT_LIST_HEAD(&dtc->threads);
if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
dmaengine: dmatest: Add support for scatter-gather DMA mode This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-09 23:40:14 +08:00
if (dmatest == 0) {
cnt = dmatest_add_threads(info, dtc, DMA_MEMCPY);
thread_count += cnt > 0 ? cnt : 0;
}
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
dmaengine: dmatest: Add support for scatter-gather DMA mode This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-09 23:40:14 +08:00
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) {
dmaengine: dmatest: Add support for scatter-gather DMA mode This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-09 23:40:14 +08:00
if (dmatest == 1) {
dmaengine: remove DMA_SG as it is dead code in kernel There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-22 01:23:13 +08:00
cnt = dmatest_add_threads(info, dtc, DMA_MEMSET);
dmaengine: dmatest: Add support for scatter-gather DMA mode This patch updates the dmatest client to Support scatter-gather dma mode. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-09 23:40:14 +08:00
thread_count += cnt > 0 ? cnt : 0;
}
}
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
cnt = dmatest_add_threads(info, dtc, DMA_XOR);
dmaengine: dmatest: correct thread_count while using multiple thread per channel It seems that thread_count is not properly calculated in dmatest. In fact the thread count number that is returned from dmatest_add_threads() is not correctly added to the thread_count and thus not properly printed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-07 00:19:44 +08:00
thread_count += cnt > 0 ? cnt : 0;
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
}
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
cnt = dmatest_add_threads(info, dtc, DMA_PQ);
dmaengine: fix missing 'cnt' in ?: in dmatest Hi, On the latest tree my compiler has started giving the warning: drivers/dma/dmatest.c:575:28: warning: the omitted middle operand in ?: will always be ?true?, suggest explicit middle operand [-Wparentheses] The following patch fixes the missing middle clause with the same fix that Nicolas Ferre used in the similar clauses. (There seems to have been a race between him fixing that and the extra clause going in a little later). I don't actually know the dmatest code/structures, nor do I own any hardware to test it on (assuming it needs a DMA engine); but this patch builds, the existing code is almost certainly wrong and the fix is the same as the corresponding lines above it. (WTH is x=y?:z legal C anyway?) Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-08-26 07:13:55 +08:00
thread_count += cnt > 0 ? cnt : 0;
dmatest: add pq support Test raid6 p+q operations with a simple "always multiply by 1" q calculation to fit into dmatest's current destination verification scheme. Reviewed-by: Andre Noll <maan@systemlinux.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-08-30 10:09:27 +08:00
}
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
dmatest: cleanup redundant "dmatest: " prefixes ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:00 +08:00
pr_info("Started %u threads using %s\n",
dmatest: add xor test Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-26 00:13:25 +08:00
thread_count, dma_chan_name(chan));
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: move dmatest_channels and nr_channels to dmatest_info We don't need to have them global and later we would like to protect access to them as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:28 +08:00
list_add_tail(&dtc->node, &info->channels);
info->nr_channels++;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
return 0;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmaengine: kill enum dma_state_client DMA_NAK is now useless. We can just use a bool instead. Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:19 +08:00
static bool filter(struct dma_chan *chan, void *param)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
struct dmatest_params *params = param;
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
if (!dmatest_match_channel(params, chan) ||
!dmatest_match_device(params, chan->device))
dmaengine: kill enum dma_state_client DMA_NAK is now useless. We can just use a bool instead. Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:19 +08:00
return false;
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
else
dmaengine: kill enum dma_state_client DMA_NAK is now useless. We can just use a bool instead. Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:19 +08:00
return true;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
static void request_channels(struct dmatest_info *info,
enum dma_transaction_type type)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
dma_cap_mask_t mask;
dma_cap_zero(mask);
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
dma_cap_set(type, mask);
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
for (;;) {
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
struct dmatest_params *params = &info->params;
struct dma_chan *chan;
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
chan = dma_request_channel(mask, filter, params);
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
if (chan) {
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
if (dmatest_add_channel(info, chan)) {
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
dma_release_channel(chan);
break; /* add_channel failed, punt */
}
} else
break; /* no more channels available */
dmatest: split test parameters to separate structure Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:29 +08:00
if (params->max_channels &&
info->nr_channels >= params->max_channels)
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
break; /* we have all we need */
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
static void run_threaded_test(struct dmatest_info *info)
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
{
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
struct dmatest_params *params = &info->params;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
/* Copy test parameters */
params->buf_size = test_buf_size;
strlcpy(params->channel, strim(test_channel), sizeof(params->channel));
strlcpy(params->device, strim(test_device), sizeof(params->device));
params->threads_per_chan = threads_per_chan;
params->max_channels = max_channels;
params->iterations = iterations;
params->xor_sources = xor_sources;
params->pq_sources = pq_sources;
params->timeout = timeout;
dmatest: add support for skipping verification and random data setup Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:05 +08:00
params->noverify = noverify;
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
request_channels(info, DMA_MEMCPY);
dmaengine: dmatest: add support for memset test Introducing memset test into dmatest. This change allows us to test memset capable HW using the dmatest test procedure. The new dmatest value for memset is 2 and it is not the default value. Memset support patch shares the same code path as the other dmatest code to reuse as much as we can. The first value inside the source buffer is used as a pattern to fill in the destination buffer space. Prior to running the test, source/destination buffers are initialized in the current code. "The remaining bits are the inverse of a counter which increments by one for each byte address." Memset test will fill in the upper bits of pattern with the inverse of fixed counter value 1 as opposed to an incrementing value in a loop. An example run is as follows: echo dma0chan0 > /sys/module/dmatest/parameters/channel echo 2 > /sys/module/dmatest/parameters/dmatest echo 2000 > /sys/module/dmatest/parameters/timeout echo 10 > /sys/module/dmatest/parameters/iterations echo 1 > /sys/module/dmatest/parameters/run Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-30 10:30:58 +08:00
request_channels(info, DMA_MEMSET);
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
request_channels(info, DMA_XOR);
request_channels(info, DMA_PQ);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
}
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
static void stop_threaded_test(struct dmatest_info *info)
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
{
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
struct dmatest_chan *dtc, *_dtc;
dmatest: fix use after free in dmatest_exit dmatest_cleanup_chanel will free dtc, so grab ->chan before it goes away and use it to do the release. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-05 07:06:03 +08:00
struct dma_chan *chan;
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
dmatest: move dmatest_channels and nr_channels to dmatest_info We don't need to have them global and later we would like to protect access to them as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:28 +08:00
list_for_each_entry_safe(dtc, _dtc, &info->channels, node) {
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
list_del(&dtc->node);
dmatest: fix use after free in dmatest_exit dmatest_cleanup_chanel will free dtc, so grab ->chan before it goes away and use it to do the release. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-05 07:06:03 +08:00
chan = dtc->chan;
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
dmatest_cleanup_channel(dtc);
dmatest: cleanup redundant "dmatest: " prefixes ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:00 +08:00
pr_debug("dropped channel %s\n", dma_chan_name(chan));
dmatest: fix use after free in dmatest_exit dmatest_cleanup_chanel will free dtc, so grab ->chan before it goes away and use it to do the release. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-05 07:06:03 +08:00
dma_release_channel(chan);
dmatest: convert to dma_request_channel Replace the client registration infrastructure with a custom loop to poll for channels. Once dma_request_channel returns NULL stop asking for channels. A userspace side effect of this change if that loading the dmatest module before loading a dma driver will result in no channels being found, previously dmatest would get a callback. To facilitate testing in the built-in case dmatest_init is marked as a late_initcall. Another side effect is that channels under test can not be used for any other purpose. Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-07 02:38:15 +08:00
}
dmatest: move dmatest_channels and nr_channels to dmatest_info We don't need to have them global and later we would like to protect access to them as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:28 +08:00
info->nr_channels = 0;
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
static void restart_threaded_test(struct dmatest_info *info, bool run)
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
{
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
/* we might be called early to set run=, defer running until all
* parameters have been evaluated
*/
if (!info->did_init)
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
return;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
/* Stop any running test first */
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
stop_threaded_test(info);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
/* Run test with new parameters */
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
run_threaded_test(info);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
}
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
static int dmatest_run_get(char *val, const struct kernel_param *kp)
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
{
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
struct dmatest_info *info = &test_info;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
mutex_lock(&info->lock);
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
if (is_threaded_test_run(info)) {
dmatest_run = true;
dmatest: return actual state in 'run' file The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run To wait for test done the user may perform a busy loop that checks the state. % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] > do > echo -n "." > sleep 1 > done > echo Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:31 +08:00
} else {
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
stop_threaded_test(info);
dmatest_run = false;
dmatest: return actual state in 'run' file The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run To wait for test done the user may perform a busy loop that checks the state. % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] > do > echo -n "." > sleep 1 > done > echo Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:31 +08:00
}
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
mutex_unlock(&info->lock);
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
return param_get_bool(val, kp);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
}
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
static int dmatest_run_set(const char *val, const struct kernel_param *kp)
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
{
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
struct dmatest_info *info = &test_info;
int ret;
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
mutex_lock(&info->lock);
ret = param_set_bool(val, kp);
if (ret) {
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
mutex_unlock(&info->lock);
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
return ret;
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
}
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
if (is_threaded_test_run(info))
ret = -EBUSY;
else if (dmatest_run)
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
restart_threaded_test(info, dmatest_run);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
mutex_unlock(&info->lock);
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
return ret;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
}
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
static int __init dmatest_init(void)
{
struct dmatest_info *info = &test_info;
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
struct dmatest_params *params = &info->params;
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
if (dmatest_run) {
mutex_lock(&info->lock);
dmatest: support xor-only, or pq-only channels in tests Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:02 +08:00
run_threaded_test(info);
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
mutex_unlock(&info->lock);
}
dmatest: move dmatest_channels and nr_channels to dmatest_info We don't need to have them global and later we would like to protect access to them as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:28 +08:00
dmatest: add a 'wait' parameter Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:09 +08:00
if (params->iterations && wait)
wait_event(thread_wait, !is_threaded_test_run(info));
dmatest: gather test results in the linked list The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:33 +08:00
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
/* module parameters are stable, inittime tests are started,
* let userspace take over 'run' control
*/
info->did_init = true;
dmatest: run test via debugfs Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:30 +08:00
return 0;
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
}
/* when compiled-in wait for drivers to load first */
late_initcall(dmatest_init);
static void __exit dmatest_exit(void)
{
struct dmatest_info *info = &test_info;
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
mutex_lock(&info->lock);
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
stop_threaded_test(info);
dmatest: restore ability to start test at module load and init 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-07 08:30:01 +08:00
mutex_unlock(&info->lock);
dmatest: create dmatest_info to keep test parameters The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-04 17:09:27 +08:00
}
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
module_exit(dmatest_exit);
Haavard Skinnemoen has left Atmel Haavard's e-mail address at Atmel is no longer valid. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18 22:49:24 +08:00
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:58:45 +08:00
MODULE_LICENSE("GPL v2");