linux/arch/x86/pci/broadcom_bus.c

/*
 * Read address ranges from a Broadcom CNB20LE Host Bridge
 *
 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 */

#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/pci_x86.h>
#include <asm/pci-direct.h>

#include "bus_numa.h"

static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
{
	struct pci_root_info *info;
	struct pci_root_res *root_res;
	struct resource res;
	u16 word1, word2;
	u8 fbus, lbus;

	/* read the PCI bus numbers */
	fbus = read_pci_config_byte(bus, slot, func, 0x44);
	lbus = read_pci_config_byte(bus, slot, func, 0x45);
	info = alloc_pci_root_info(fbus, lbus, 0, 0);

	/*
	 * Add the legacy IDE ports on bus 0
	 *
	 * These do not exist anywhere in the bridge registers, AFAICT. I do
	 * not have the datasheet, so this is the best I can do.
	 */
	if (fbus == 0) {
		update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
		update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
		update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
		update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
		update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
	}

	/* read the non-prefetchable memory window */
	word1 = read_pci_config_16(bus, slot, func, 0xc0);
	word2 = read_pci_config_16(bus, slot, func, 0xc2);
	if (word1 != word2) {
		res.start = (word1 << 16) | 0x0000;
		res.end   = (word2 << 16) | 0xffff;
		res.flags = IORESOURCE_MEM;
		update_res(info, res.start, res.end, res.flags, 0);
	}

	/* read the prefetchable memory window */
	word1 = read_pci_config_16(bus, slot, func, 0xc4);
	word2 = read_pci_config_16(bus, slot, func, 0xc6);
	if (word1 != word2) {
		res.start = ((resource_size_t) word1 << 16) | 0x0000;
		res.end   = ((resource_size_t) word2 << 16) | 0xffff;
		res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
		update_res(info, res.start, res.end, res.flags, 0);
	}

	/* read the IO port window */
	word1 = read_pci_config_16(bus, slot, func, 0xd0);
	word2 = read_pci_config_16(bus, slot, func, 0xd2);
	if (word1 != word2) {
		res.start = word1;
		res.end   = word2;
		res.flags = IORESOURCE_IO;
		update_res(info, res.start, res.end, res.flags, 0);
	}

	/* print information about this host bridge */
	res.start = fbus;
	res.end   = lbus;
	res.flags = IORESOURCE_BUS;
	printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);

	list_for_each_entry(root_res, &info->resources, list)
		printk(KERN_INFO "host bridge window %pR\n", &root_res->res);
}

static int __init broadcom_postcore_init(void)
{
	u8 bus = 0, slot = 0;
	u32 id;
	u16 vendor, device;

#ifdef CONFIG_ACPI
	/*
	 * We should get host bridge information from ACPI unless the BIOS
	 * doesn't support it.
	 */
	if (!acpi_disabled && acpi_os_get_root_pointer())
		return 0;
#endif

	id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
	vendor = id & 0xffff;
	device = (id >> 16) & 0xffff;

	if (vendor == PCI_VENDOR_ID_SERVERWORKS &&
	    device == PCI_DEVICE_ID_SERVERWORKS_LE) {
		cnb20le_res(bus, slot, 0);
		cnb20le_res(bus, slot, 1);
	}
	return 0;
}

postcore_initcall(broadcom_postcore_init);