openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/s390/cio/device.h

147 lines
4.3 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef S390_DEVICE_H
#define S390_DEVICE_H
[S390] cio async subchannel reprobe. Changes in the DASD driver require an asynchronous implementation of the subchannel reprobe loop. This loop was so far only used by the blacklisting mechanism but is now available to all CCW device drivers. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 20:57:03 +08:00
#include <asm/ccwdev.h>
atomic: use <linux/atomic.h> This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 07:09:06 +08:00
#include <linux/atomic.h>
[S390] cio async subchannel reprobe. Changes in the DASD driver require an asynchronous implementation of the subchannel reprobe loop. This loop was so far only used by the blacklisting mechanism but is now available to all CCW device drivers. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 20:57:03 +08:00
#include <linux/wait.h>
[S390] ccw_device_notify: improve return codes Callers of ccw_device_notify could not distinguish between a driver who has no notifier registered and a driver who doesn't want to keep a device after a certain event. Change this by adding proper return codes. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 05:37:28 +08:00
#include <linux/notifier.h>
[S390] fix mismatch in summation of I/O IRQ statistics Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:04 +08:00
#include <linux/kernel_stat.h>
[S390] cio: Introduce subchannel->private. Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 21:10:43 +08:00
#include "io_sch.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* states of the device statemachine
*/
enum dev_state {
DEV_STATE_NOT_OPER,
DEV_STATE_SENSE_PGID,
DEV_STATE_SENSE_ID,
DEV_STATE_OFFLINE,
DEV_STATE_VERIFY,
DEV_STATE_ONLINE,
DEV_STATE_W4SENSE,
DEV_STATE_DISBAND_PGID,
DEV_STATE_BOXED,
/* states to wait for i/o completion before doing something */
DEV_STATE_TIMEOUT_KILL,
DEV_STATE_QUIESCE,
/* special states for devices gone not operational */
DEV_STATE_DISCONNECTED,
DEV_STATE_DISCONNECTED_SENSE_ID,
DEV_STATE_CMFCHANGE,
[S390] rework of channel measurement facility. Fixes for several channel measurement facility bugs: * Blocks copied from the hardware might not be consistent. Solve this by moving the copying into idle state and repeating the copying. * avg_sample_interval changed with every read, even though no new block was available. Solve this by storing a timestamp when the last new block was received. * Several locking issues. * Measurements were not reenabled after a disconnected device became available again. * Remove #defines for ioctls that were never implemented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 21:08:41 +08:00
DEV_STATE_CMFUPDATE,
[S390] cio: make steal lock procedure more robust An Unconditional Reserve + Release operation (steal lock) for a boxed device may fail when encountering special error cases (e.g. unit checks or path errors). Fix this by using the more robust ccw_request infrastructure for performing the steal lock CCW program. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 19:51:32 +08:00
DEV_STATE_STEAL_LOCK,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* last element! */
NR_DEV_STATES
};
/*
* asynchronous events of the device statemachine
*/
enum dev_event {
DEV_EVENT_NOTOPER,
DEV_EVENT_INTERRUPT,
DEV_EVENT_TIMEOUT,
DEV_EVENT_VERIFY,
/* last element! */
NR_DEV_EVENTS
};
struct ccw_device;
/*
* action called through jumptable
*/
typedef void (fsm_func_t)(struct ccw_device *, enum dev_event);
extern fsm_func_t *dev_jumptable[NR_DEV_STATES][NR_DEV_EVENTS];
static inline void
dev_fsm_event(struct ccw_device *cdev, enum dev_event dev_event)
{
[S390] fix mismatch in summation of I/O IRQ statistics Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:04 +08:00
int state = cdev->private->state;
if (dev_event == DEV_EVENT_INTERRUPT) {
if (state == DEV_STATE_ONLINE)
s390/irq: remove split irq fields from /proc/stat Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-02 22:18:18 +08:00
inc_irq_stat(cdev->private->int_class);
[S390] fix mismatch in summation of I/O IRQ statistics Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:04 +08:00
else if (state != DEV_STATE_CMFCHANGE &&
state != DEV_STATE_CMFUPDATE)
s390/irq: remove split irq fields from /proc/stat Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-02 22:18:18 +08:00
inc_irq_stat(IRQIO_CIO);
[S390] fix mismatch in summation of I/O IRQ statistics Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:04 +08:00
}
dev_jumptable[state][dev_event](cdev, dev_event);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Delivers 1 if the device state is final.
*/
static inline int
dev_fsm_final_state(struct ccw_device *cdev)
{
return (cdev->private->state == DEV_STATE_NOT_OPER ||
cdev->private->state == DEV_STATE_OFFLINE ||
cdev->private->state == DEV_STATE_ONLINE ||
cdev->private->state == DEV_STATE_BOXED);
}
[S390] cio: merge init calls Define initialization sequence of css and ccw bus init calls by merging them into a single init call. Also introduce channel_subsystem_init_sync to wait for the initialization of devices to finish. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-23 04:58:33 +08:00
int __init io_subchannel_init(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void io_subchannel_recog_done(struct ccw_device *cdev);
[S390] cio: introduce cio_commit_config To change the configuration of a subchannel we alter the modifiable bits of the subchannel's schib field and issue a modify subchannel. There can be the case that not all changes were applied -or worse- quietly overwritten by the hardware. With the next store subchannel we obtain the current state of the hardware but lose our target configuration. With this patch we introduce a subchannel_config structure which contains the target subchannel configuration. Additionally the msch wrapper cio_modify is replaced with cio_commit_config which copies the desired changes to a temporary schib. msch is then called with the temporary schib. This schib is only written back to the subchannel if all changes were applied. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 20:39:13 +08:00
void io_subchannel_init_config(struct subchannel *sch);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ccw_device_cancel_halt_clear(struct ccw_device *);
[S390] Support for disconnected devices reappearing on another subchannel. - create a 'pseudo_subchannel' per channel subsystem (the 'orphanage') - use the orphanage as a shelter for ccw_devices that can't remain on the same subchannel Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08 22:54:28 +08:00
int ccw_device_is_orphan(struct ccw_device *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[S390] cio: handle error during device recognition consistently Remove the return code from ccw_device_recognition and handle recognition errors through the existing callback ccw_device_recog_done to reduce cleanup code duplication. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 19:51:21 +08:00
void ccw_device_recognition(struct ccw_device *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ccw_device_online(struct ccw_device *);
int ccw_device_offline(struct ccw_device *);
[S390] pm: ccw bus power management callbacks Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 16:30:20 +08:00
void ccw_device_update_sense_data(struct ccw_device *);
int ccw_device_test_sense_data(struct ccw_device *);
[S390] cio: introduce ccw_device_schedule_sch_unregister Introduce ccw_device_schedule_sch_unregister as a wrapper for queuing ccw_device_call_sch_unregister on the slow_path_wq. This wrapper will be used in the next patch. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-01 01:16:04 +08:00
void ccw_device_schedule_sch_unregister(struct ccw_device *);
[S390] cio: introduce purge function for /proc/cio_ignore Allow users to remove blacklisted ccw devices by using the /proc/cio_ignore interface: echo purge > /proc/cio_ignore will remove all devices which are offline and blacklisted. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-11 03:33:06 +08:00
int ccw_purge_blacklisted(void);
[S390] cio: introduce ccw device todos Introduce a central mechanism for performing delayed ccw device work to ensure that different types of work do not overwrite each other. Prioritization ensures that the most important work is always performed while less important tasks are either obsoleted or repeated later. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 19:51:19 +08:00
void ccw_device_sched_todo(struct ccw_device *cdev, enum cdev_todo todo);
s390/ccwgroup: exploit ccwdev_by_dev_id Instead of finding devices via driver_find_device use the bus_find_device wrapper get_ccwdev_by_dev_id. This allows us to get rid of the ccw_driver argument of ccwgroup_create_dev and thus simplify the interface. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 23:52:07 +08:00
struct ccw_device *get_ccwdev_by_dev_id(struct ccw_dev_id *dev_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Function prototypes for device status and basic sense stuff. */
void ccw_device_accumulate_irb(struct ccw_device *, struct irb *);
void ccw_device_accumulate_basic_sense(struct ccw_device *, struct irb *);
int ccw_device_accumulate_and_sense(struct ccw_device *, struct irb *);
int ccw_device_do_sense(struct ccw_device *, struct irb *);
[S390] cio: consistent infrastructure for internal I/O requests Reduce code duplication by introducing a central infrastructure to perform an internal I/O operation on a CCW device. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07 19:51:25 +08:00
/* Function prototype for internal request handling. */
int lpm_adjust(int lpm, int mask);
void ccw_request_start(struct ccw_device *);
int ccw_request_cancel(struct ccw_device *cdev);
void ccw_request_handler(struct ccw_device *cdev);
void ccw_request_timeout(struct ccw_device *cdev);
void ccw_request_notoper(struct ccw_device *cdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Function prototypes for sense id stuff. */
void ccw_device_sense_id_start(struct ccw_device *);
void ccw_device_sense_id_done(struct ccw_device *, int);
/* Function prototypes for path grouping stuff. */
void ccw_device_verify_start(struct ccw_device *);
void ccw_device_verify_done(struct ccw_device *, int);
void ccw_device_disband_start(struct ccw_device *);
void ccw_device_disband_done(struct ccw_device *, int);
int ccw_device_stlck(struct ccw_device *);
[S390] cio: Rework css driver. Rework the css driver methods to provide sane callbacks for subchannels of all types. As a bonus, this cleans up and simplyfies the machine check handling for I/O subchannels a lot. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14 15:58:45 +08:00
/* Helper function for machine check handling. */
void ccw_device_trigger_reprobe(struct ccw_device *);
void ccw_device_kill_io(struct ccw_device *);
int ccw_device_notify(struct ccw_device *, int);
[S390] cio: make not operational handling consistent When a ccw device appears not operational, inform the associated device driver and act according to the response: if the driver wants to keep the device, put it into the disconnected state. If not, or if there is no driver or if the device is not online, unregister it. This approach is consistent with no-path event handling. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 16:34:02 +08:00
void ccw_device_set_disconnected(struct ccw_device *cdev);
[S390] cio: call ccw driver notify function with lock held Calling a ccw driver's notify function without the ccw device lock held opens up a race window between discovery and handling of a change in the device operational state. As a result, the device driver may encounter unexpected device malfunction, leading to out-of-retry situations or similar. Remove race by extending the ccw device lock from state change discovery to the calling of the notify function. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-22 01:46:39 +08:00
void ccw_device_set_notoper(struct ccw_device *cdev);
[S390] cio: Rework css driver. Rework the css driver methods to provide sane callbacks for subchannels of all types. As a bonus, this cleans up and simplyfies the machine check handling for I/O subchannels a lot. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14 15:58:45 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void ccw_device_set_timeout(struct ccw_device *, int);
[S390] rework of channel measurement facility. Fixes for several channel measurement facility bugs: * Blocks copied from the hardware might not be consistent. Solve this by moving the copying into idle state and repeating the copying. * avg_sample_interval changed with every read, even though no new block was available. Solve this by storing a timestamp when the last new block was received. * Several locking issues. * Measurements were not reenabled after a disconnected device became available again. * Remove #defines for ioctls that were never implemented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 21:08:41 +08:00
/* Channel measurement facility related */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void retry_set_schib(struct ccw_device *cdev);
[S390] rework of channel measurement facility. Fixes for several channel measurement facility bugs: * Blocks copied from the hardware might not be consistent. Solve this by moving the copying into idle state and repeating the copying. * avg_sample_interval changed with every read, even though no new block was available. Solve this by storing a timestamp when the last new block was received. * Several locking issues. * Measurements were not reenabled after a disconnected device became available again. * Remove #defines for ioctls that were never implemented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 21:08:41 +08:00
void cmf_retry_copy_block(struct ccw_device *);
int cmf_reenable(struct ccw_device *);
s390/cio: reactivate cmf after hibernate During resume from hibernate we already reenable measurement block updates on a per device basis. In addition to that we also need to activate channel measurement globally using the set channel monitor instruction. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-09 16:29:59 +08:00
void cmf_reactivate(void);
[S390] pm: ccw bus power management callbacks Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16 16:30:20 +08:00
int ccw_set_cmf(struct ccw_device *cdev, int enable);
[S390] Fix a lot of sparse warnings. Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17 13:46:26 +08:00
extern struct device_attribute dev_attr_cmb_enable;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif