openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/mach-omap2/prm2xxx.h

134 lines
5.1 KiB
C
Raw Normal View History

ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 15:01:10 +08:00
/*
* OMAP2xxx Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The PRM hardware modules on the OMAP2/3 are quite similar to each
* other. The PRM on OMAP4 has a new register layout, and is handled
* in a separate file.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
#include "prcm-common.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
/*
* OMAP2-specific global PRM registers
ARM: OMAP2+: raw read and write endian fix All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-16 01:37:46 +08:00
* Use {read,write}l_relaxed() with these registers.
ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 15:01:10 +08:00
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*
*/
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
* Use prm_{read,write}_mod_reg() with these registers.
*
* With a few exceptions, these are the register names beginning with
* {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
* IRQSTATUS and IRQENABLE bits.)
*/
/* Register offsets appearing on both OMAP2 and OMAP3 */
#define OMAP2_RM_RSTCTRL 0x0050
#define OMAP2_RM_RSTTIME 0x0054
#define OMAP2_RM_RSTST 0x0058
#define OMAP2_PM_PWSTCTRL 0x00e0
#define OMAP2_PM_PWSTST 0x00e4
#define PM_WKEN 0x00a0
#define PM_WKEN1 PM_WKEN
#define PM_WKST 0x00b0
#define PM_WKST1 PM_WKST
#define PM_WKDEP 0x00c8
#define PM_EVGENCTRL 0x00d4
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
/* OMAP2xxx specific register offsets */
#define OMAP24XX_PM_WKEN2 0x00a4
#define OMAP24XX_PM_WKST2 0x00b4
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 15:01:11 +08:00
#ifndef __ASSEMBLER__
/* Function prototypes */
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver The OMAP watchdog timer driver needs to determine what caused the SoC to reset for its GETBOOTSTATUS ioctl. So, define a set of standard reset sources across OMAP SoCs. For OMAP2xxx, 3xxx, and 4xxx SoCs, define mappings from the SoC-specific reset source register bits to the standardized reset source IDs. Create SoC-specific PRM functions that read the appropriate per-SoC register and use the mapping to return the standardized reset bits. Register the SoC-specific PRM functions with the common PRM code via prm_register(). Create a function in the common PRM code, prm_read_reset_sources(), that calls the SoC-specific function, registered during boot. This patch does not yet handle some SoCs, such as AM33xx. Those SoCs were not handled by the code this will replace. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 15:01:13 +08:00
ARM: OMAP24xx: PRM: add API for clearing wakeup status bits This helps to isolate the PRM into its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-26 21:31:05 +08:00
void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
ARM: OMAP2/3: PRM: add SoC reset functions (using the CORE DPLL method) Add SoC reset functions into the PRM code. These functions are based on code from mach-omap2/prcm.c. They reset the SoC using the CORE DPLL reset method (as opposed to one of the other two or three chip reset methods). Adding them here will facilitate their removal from arch/arm/mach-omap2/prcm.c. (prcm.c is deprecated.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-10-30 10:55:46 +08:00
ARM: OMAP2+: PRM: initialize some PRM functions early Some PRM functions will need to be called by the hwmod code early in kernel init. To handle this, split the PRM initialization code into early and late phases. The early init is handled via mach-omap2/io.c, while the late init is handled by subsys_initcall(). Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-11-22 07:15:16 +08:00
extern int __init omap2xxx_prm_init(void);
ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver The OMAP watchdog timer driver needs to determine what caused the SoC to reset for its GETBOOTSTATUS ioctl. So, define a set of standard reset sources across OMAP SoCs. For OMAP2xxx, 3xxx, and 4xxx SoCs, define mappings from the SoC-specific reset source register bits to the standardized reset source IDs. Create SoC-specific PRM functions that read the appropriate per-SoC register and use the mapping to return the standardized reset bits. Register the SoC-specific PRM functions with the common PRM code via prm_register(). Create a function in the common PRM code, prm_read_reset_sources(), that calls the SoC-specific function, registered during boot. This patch does not yet handle some SoCs, such as AM33xx. Those SoCs were not handled by the code this will replace. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-10-21 15:01:13 +08:00
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 15:01:11 +08:00
#endif
ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 15:01:10 +08:00
#endif