linux/net/batman-adv/types.h

1281 lines
46 KiB
C
Raw Normal View History

/* Copyright (C) 2007-2015 B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _NET_BATMAN_ADV_TYPES_H_
#define _NET_BATMAN_ADV_TYPES_H_
2015-04-18 01:40:28 +08:00
#ifndef _NET_BATMAN_ADV_MAIN_H_
#error only "main.h" can be included directly
#endif
#include <linux/bitops.h>
#include <linux/compiler.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
#include <linux/sched.h> /* for linux/wait.h */
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include "packet.h"
2015-04-18 01:40:28 +08:00
struct seq_file;
#ifdef CONFIG_BATMAN_ADV_DAT
/**
* batadv_dat_addr_t - it is the type used for all DHT addresses. If it is
* changed, BATADV_DAT_ADDR_MAX is changed as well.
*
* *Please be careful: batadv_dat_addr_t must be UNSIGNED*
*/
#define batadv_dat_addr_t u16
#endif /* CONFIG_BATMAN_ADV_DAT */
/**
* enum batadv_dhcp_recipient - dhcp destination
* @BATADV_DHCP_NO: packet is not a dhcp message
* @BATADV_DHCP_TO_SERVER: dhcp message is directed to a server
* @BATADV_DHCP_TO_CLIENT: dhcp message is directed to a client
*/
enum batadv_dhcp_recipient {
BATADV_DHCP_NO = 0,
BATADV_DHCP_TO_SERVER,
BATADV_DHCP_TO_CLIENT,
};
/**
* BATADV_TT_REMOTE_MASK - bitmask selecting the flags that are sent over the
* wire only
*/
#define BATADV_TT_REMOTE_MASK 0x00FF
/**
* BATADV_TT_SYNC_MASK - bitmask of the flags that need to be kept in sync
* among the nodes. These flags are used to compute the global/local CRC
*/
#define BATADV_TT_SYNC_MASK 0x00F0
/**
* struct batadv_hard_iface_bat_iv - per hard interface B.A.T.M.A.N. IV data
* @ogm_buff: buffer holding the OGM packet
* @ogm_buff_len: length of the OGM packet buffer
* @ogm_seqno: OGM sequence number - used to identify each OGM
*/
struct batadv_hard_iface_bat_iv {
unsigned char *ogm_buff;
int ogm_buff_len;
atomic_t ogm_seqno;
};
/**
* struct batadv_hard_iface - network device known to batman-adv
* @list: list node for batadv_hardif_list
* @if_num: identificator of the interface
* @if_status: status of the interface for batman-adv
* @net_dev: pointer to the net_device
* @num_bcasts: number of payload re-broadcasts on this interface (ARQ)
* @hardif_obj: kobject of the per interface sysfs "mesh" directory
* @refcount: number of contexts the object is used
* @batman_adv_ptype: packet type describing packets that should be processed by
* batman-adv for this interface
* @soft_iface: the batman-adv interface which uses this network interface
* @rcu: struct used for freeing in an RCU-safe manner
* @bat_iv: BATMAN IV specific per hard interface data
* @cleanup_work: work queue callback item for hard interface deinit
* @debug_dir: dentry for nc subdir in batman-adv directory in debugfs
*/
struct batadv_hard_iface {
struct list_head list;
s16 if_num;
char if_status;
struct net_device *net_dev;
u8 num_bcasts;
struct kobject *hardif_obj;
atomic_t refcount;
struct packet_type batman_adv_ptype;
struct net_device *soft_iface;
struct rcu_head rcu;
struct batadv_hard_iface_bat_iv bat_iv;
struct work_struct cleanup_work;
struct dentry *debug_dir;
};
/**
* struct batadv_orig_ifinfo - originator info per outgoing interface
* @list: list node for orig_node::ifinfo_list
* @if_outgoing: pointer to outgoing hard interface
* @router: router that should be used to reach this originator
* @last_real_seqno: last and best known sequence number
* @last_ttl: ttl of last received packet
* @batman_seqno_reset: time when the batman seqno window was reset
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_orig_ifinfo {
struct hlist_node list;
struct batadv_hard_iface *if_outgoing;
struct batadv_neigh_node __rcu *router; /* rcu protected pointer */
u32 last_real_seqno;
u8 last_ttl;
unsigned long batman_seqno_reset;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_frag_table_entry - head in the fragment buffer table
* @head: head of list with fragments
* @lock: lock to protect the list of fragments
* @timestamp: time (jiffie) of last received fragment
* @seqno: sequence number of the fragments in the list
* @size: accumulated size of packets in list
* @total_size: expected size of the assembled packet
*/
struct batadv_frag_table_entry {
struct hlist_head head;
spinlock_t lock; /* protects head */
unsigned long timestamp;
u16 seqno;
u16 size;
u16 total_size;
};
/**
* struct batadv_frag_list_entry - entry in a list of fragments
* @list: list node information
* @skb: fragment
* @no: fragment number in the set
*/
struct batadv_frag_list_entry {
struct hlist_node list;
struct sk_buff *skb;
u8 no;
};
/**
* struct batadv_vlan_tt - VLAN specific TT attributes
* @crc: CRC32 checksum of the entries belonging to this vlan
* @num_entries: number of TT entries for this VLAN
*/
struct batadv_vlan_tt {
u32 crc;
atomic_t num_entries;
};
/**
* struct batadv_orig_node_vlan - VLAN specific data per orig_node
* @vid: the VLAN identifier
* @tt: VLAN specific TT attributes
* @list: list node for orig_node::vlan_list
* @refcount: number of context where this object is currently in use
* @rcu: struct used for freeing in a RCU-safe manner
*/
struct batadv_orig_node_vlan {
unsigned short vid;
struct batadv_vlan_tt tt;
struct hlist_node list;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_orig_bat_iv - B.A.T.M.A.N. IV private orig_node members
* @bcast_own: set of bitfields (one per hard interface) where each one counts
* the number of our OGMs this orig_node rebroadcasted "back" to us (relative
* to last_real_seqno). Every bitfield is BATADV_TQ_LOCAL_WINDOW_SIZE bits long.
* @bcast_own_sum: sum of bcast_own
* @ogm_cnt_lock: lock protecting bcast_own, bcast_own_sum,
* neigh_node->bat_iv.real_bits & neigh_node->bat_iv.real_packet_count
*/
struct batadv_orig_bat_iv {
unsigned long *bcast_own;
u8 *bcast_own_sum;
/* ogm_cnt_lock protects: bcast_own, bcast_own_sum,
* neigh_node->bat_iv.real_bits & neigh_node->bat_iv.real_packet_count
*/
spinlock_t ogm_cnt_lock;
};
/**
* struct batadv_orig_node - structure for orig_list maintaining nodes of mesh
* @orig: originator ethernet address
* @ifinfo_list: list for routers per outgoing interface
* @last_bonding_candidate: pointer to last ifinfo of last used router
* @batadv_dat_addr_t: address of the orig node in the distributed hash
* @last_seen: time when last packet from this node was received
* @bcast_seqno_reset: time when the broadcast seqno window was reset
* @mcast_handler_lock: synchronizes mcast-capability and -flag changes
* @mcast_flags: multicast flags announced by the orig node
* @mcast_want_all_unsnoop_node: a list node for the
* mcast.want_all_unsnoopables list
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @mcast_want_all_ipv4_node: a list node for the mcast.want_all_ipv4 list
* @mcast_want_all_ipv6_node: a list node for the mcast.want_all_ipv6 list
* @capabilities: announced capabilities of this originator
* @capa_initialized: bitfield to remember whether a capability was initialized
* @last_ttvn: last seen translation table version number
* @tt_buff: last tt changeset this node received from the orig node
* @tt_buff_len: length of the last tt changeset this node received from the
* orig node
* @tt_buff_lock: lock that protects tt_buff and tt_buff_len
* @tt_lock: prevents from updating the table while reading it. Table update is
* made up by two operations (data structure update and metdata -CRC/TTVN-
* recalculation) and they have to be executed atomically in order to avoid
* another thread to read the table/metadata between those.
* @bcast_bits: bitfield containing the info which payload broadcast originated
* from this orig node this host already has seen (relative to
* last_bcast_seqno)
* @last_bcast_seqno: last broadcast sequence number received by this host
* @neigh_list: list of potential next hop neighbor towards this orig node
* @neigh_list_lock: lock protecting neigh_list and router
* @hash_entry: hlist node for batadv_priv::orig_hash
* @bat_priv: pointer to soft_iface this orig node belongs to
* @bcast_seqno_lock: lock protecting bcast_bits & last_bcast_seqno
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
* @in_coding_list: list of nodes this orig can hear
* @out_coding_list: list of nodes that can hear this orig
* @in_coding_list_lock: protects in_coding_list
* @out_coding_list_lock: protects out_coding_list
* @fragments: array with heads for fragment chains
* @vlan_list: a list of orig_node_vlan structs, one per VLAN served by the
* originator represented by this object
* @vlan_list_lock: lock protecting vlan_list
* @bat_iv: B.A.T.M.A.N. IV private structure
*/
struct batadv_orig_node {
u8 orig[ETH_ALEN];
struct hlist_head ifinfo_list;
struct batadv_orig_ifinfo *last_bonding_candidate;
#ifdef CONFIG_BATMAN_ADV_DAT
batadv_dat_addr_t dat_addr;
#endif
unsigned long last_seen;
unsigned long bcast_seqno_reset;
#ifdef CONFIG_BATMAN_ADV_MCAST
/* synchronizes mcast tvlv specific orig changes */
spinlock_t mcast_handler_lock;
u8 mcast_flags;
struct hlist_node mcast_want_all_unsnoopables_node;
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
struct hlist_node mcast_want_all_ipv4_node;
struct hlist_node mcast_want_all_ipv6_node;
#endif
unsigned long capabilities;
unsigned long capa_initialized;
atomic_t last_ttvn;
unsigned char *tt_buff;
s16 tt_buff_len;
spinlock_t tt_buff_lock; /* protects tt_buff & tt_buff_len */
/* prevents from changing the table while reading it */
spinlock_t tt_lock;
DECLARE_BITMAP(bcast_bits, BATADV_TQ_LOCAL_WINDOW_SIZE);
u32 last_bcast_seqno;
struct hlist_head neigh_list;
/* neigh_list_lock protects: neigh_list and router */
spinlock_t neigh_list_lock;
struct hlist_node hash_entry;
struct batadv_priv *bat_priv;
/* bcast_seqno_lock protects: bcast_bits & last_bcast_seqno */
spinlock_t bcast_seqno_lock;
atomic_t refcount;
struct rcu_head rcu;
#ifdef CONFIG_BATMAN_ADV_NC
struct list_head in_coding_list;
struct list_head out_coding_list;
spinlock_t in_coding_list_lock; /* Protects in_coding_list */
spinlock_t out_coding_list_lock; /* Protects out_coding_list */
#endif
struct batadv_frag_table_entry fragments[BATADV_FRAG_BUFFER_COUNT];
struct hlist_head vlan_list;
spinlock_t vlan_list_lock; /* protects vlan_list */
struct batadv_orig_bat_iv bat_iv;
};
/**
* enum batadv_orig_capabilities - orig node capabilities
* @BATADV_ORIG_CAPA_HAS_DAT: orig node has distributed arp table enabled
* @BATADV_ORIG_CAPA_HAS_NC: orig node has network coding enabled
* @BATADV_ORIG_CAPA_HAS_TT: orig node has tt capability
* @BATADV_ORIG_CAPA_HAS_MCAST: orig node has some multicast capability
* (= orig node announces a tvlv of type BATADV_TVLV_MCAST)
*/
enum batadv_orig_capabilities {
BATADV_ORIG_CAPA_HAS_DAT,
BATADV_ORIG_CAPA_HAS_NC,
BATADV_ORIG_CAPA_HAS_TT,
BATADV_ORIG_CAPA_HAS_MCAST,
};
/**
* struct batadv_gw_node - structure for orig nodes announcing gw capabilities
* @list: list node for batadv_priv_gw::list
* @orig_node: pointer to corresponding orig node
* @bandwidth_down: advertised uplink download bandwidth
* @bandwidth_up: advertised uplink upload bandwidth
* @deleted: this struct is scheduled for deletion
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_gw_node {
struct hlist_node list;
struct batadv_orig_node *orig_node;
u32 bandwidth_down;
u32 bandwidth_up;
unsigned long deleted;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_neigh_node - structure for single hops neighbors
* @list: list node for batadv_orig_node::neigh_list
* @orig_node: pointer to corresponding orig_node
* @addr: the MAC address of the neighboring interface
* @ifinfo_list: list for routing metrics per outgoing interface
* @ifinfo_lock: lock protecting private ifinfo members and list
* @if_incoming: pointer to incoming hard interface
* @last_seen: when last packet via this neighbor was received
* @last_ttl: last received ttl from this neigh node
* @rcu: struct used for freeing in an RCU-safe manner
* @bat_iv: B.A.T.M.A.N. IV private structure
*/
struct batadv_neigh_node {
struct hlist_node list;
struct batadv_orig_node *orig_node;
u8 addr[ETH_ALEN];
struct hlist_head ifinfo_list;
spinlock_t ifinfo_lock; /* protects ifinfo_list and its members */
struct batadv_hard_iface *if_incoming;
unsigned long last_seen;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_neigh_ifinfo_bat_iv - neighbor information per outgoing
* interface for BATMAN IV
* @tq_recv: ring buffer of received TQ values from this neigh node
* @tq_index: ring buffer index
* @tq_avg: averaged tq of all tq values in the ring buffer (tq_recv)
* @real_bits: bitfield containing the number of OGMs received from this neigh
* node (relative to orig_node->last_real_seqno)
* @real_packet_count: counted result of real_bits
*/
struct batadv_neigh_ifinfo_bat_iv {
u8 tq_recv[BATADV_TQ_GLOBAL_WINDOW_SIZE];
u8 tq_index;
u8 tq_avg;
DECLARE_BITMAP(real_bits, BATADV_TQ_LOCAL_WINDOW_SIZE);
u8 real_packet_count;
};
/**
* struct batadv_neigh_ifinfo - neighbor information per outgoing interface
* @list: list node for batadv_neigh_node::ifinfo_list
* @if_outgoing: pointer to outgoing hard interface
* @bat_iv: B.A.T.M.A.N. IV private structure
* @last_ttl: last received ttl from this neigh node
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in a RCU-safe manner
*/
struct batadv_neigh_ifinfo {
struct hlist_node list;
struct batadv_hard_iface *if_outgoing;
struct batadv_neigh_ifinfo_bat_iv bat_iv;
u8 last_ttl;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_bcast_duplist_entry - structure for LAN broadcast suppression
* @orig[ETH_ALEN]: mac address of orig node orginating the broadcast
* @crc: crc32 checksum of broadcast payload
* @entrytime: time when the broadcast packet was received
*/
#ifdef CONFIG_BATMAN_ADV_BLA
struct batadv_bcast_duplist_entry {
u8 orig[ETH_ALEN];
__be32 crc;
unsigned long entrytime;
};
#endif
/**
* enum batadv_counters - indices for traffic counters
* @BATADV_CNT_TX: transmitted payload traffic packet counter
* @BATADV_CNT_TX_BYTES: transmitted payload traffic bytes counter
* @BATADV_CNT_TX_DROPPED: dropped transmission payload traffic packet counter
* @BATADV_CNT_RX: received payload traffic packet counter
* @BATADV_CNT_RX_BYTES: received payload traffic bytes counter
* @BATADV_CNT_FORWARD: forwarded payload traffic packet counter
* @BATADV_CNT_FORWARD_BYTES: forwarded payload traffic bytes counter
* @BATADV_CNT_MGMT_TX: transmitted routing protocol traffic packet counter
* @BATADV_CNT_MGMT_TX_BYTES: transmitted routing protocol traffic bytes counter
* @BATADV_CNT_MGMT_RX: received routing protocol traffic packet counter
* @BATADV_CNT_MGMT_RX_BYTES: received routing protocol traffic bytes counter
* @BATADV_CNT_FRAG_TX: transmitted fragment traffic packet counter
* @BATADV_CNT_FRAG_TX_BYTES: transmitted fragment traffic bytes counter
* @BATADV_CNT_FRAG_RX: received fragment traffic packet counter
* @BATADV_CNT_FRAG_RX_BYTES: received fragment traffic bytes counter
* @BATADV_CNT_FRAG_FWD: forwarded fragment traffic packet counter
* @BATADV_CNT_FRAG_FWD_BYTES: forwarded fragment traffic bytes counter
* @BATADV_CNT_TT_REQUEST_TX: transmitted tt req traffic packet counter
* @BATADV_CNT_TT_REQUEST_RX: received tt req traffic packet counter
* @BATADV_CNT_TT_RESPONSE_TX: transmitted tt resp traffic packet counter
* @BATADV_CNT_TT_RESPONSE_RX: received tt resp traffic packet counter
* @BATADV_CNT_TT_ROAM_ADV_TX: transmitted tt roam traffic packet counter
* @BATADV_CNT_TT_ROAM_ADV_RX: received tt roam traffic packet counter
* @BATADV_CNT_DAT_GET_TX: transmitted dht GET traffic packet counter
* @BATADV_CNT_DAT_GET_RX: received dht GET traffic packet counter
* @BATADV_CNT_DAT_PUT_TX: transmitted dht PUT traffic packet counter
* @BATADV_CNT_DAT_PUT_RX: received dht PUT traffic packet counter
* @BATADV_CNT_DAT_CACHED_REPLY_TX: transmitted dat cache reply traffic packet
* counter
* @BATADV_CNT_NC_CODE: transmitted nc-combined traffic packet counter
* @BATADV_CNT_NC_CODE_BYTES: transmitted nc-combined traffic bytes counter
* @BATADV_CNT_NC_RECODE: transmitted nc-recombined traffic packet counter
* @BATADV_CNT_NC_RECODE_BYTES: transmitted nc-recombined traffic bytes counter
* @BATADV_CNT_NC_BUFFER: counter for packets buffered for later nc decoding
* @BATADV_CNT_NC_DECODE: received and nc-decoded traffic packet counter
* @BATADV_CNT_NC_DECODE_BYTES: received and nc-decoded traffic bytes counter
* @BATADV_CNT_NC_DECODE_FAILED: received and decode-failed traffic packet
* counter
* @BATADV_CNT_NC_SNIFFED: counter for nc-decoded packets received in promisc
* mode.
* @BATADV_CNT_NUM: number of traffic counters
*/
enum batadv_counters {
BATADV_CNT_TX,
BATADV_CNT_TX_BYTES,
BATADV_CNT_TX_DROPPED,
BATADV_CNT_RX,
BATADV_CNT_RX_BYTES,
BATADV_CNT_FORWARD,
BATADV_CNT_FORWARD_BYTES,
BATADV_CNT_MGMT_TX,
BATADV_CNT_MGMT_TX_BYTES,
BATADV_CNT_MGMT_RX,
BATADV_CNT_MGMT_RX_BYTES,
BATADV_CNT_FRAG_TX,
BATADV_CNT_FRAG_TX_BYTES,
BATADV_CNT_FRAG_RX,
BATADV_CNT_FRAG_RX_BYTES,
BATADV_CNT_FRAG_FWD,
BATADV_CNT_FRAG_FWD_BYTES,
BATADV_CNT_TT_REQUEST_TX,
BATADV_CNT_TT_REQUEST_RX,
BATADV_CNT_TT_RESPONSE_TX,
BATADV_CNT_TT_RESPONSE_RX,
BATADV_CNT_TT_ROAM_ADV_TX,
BATADV_CNT_TT_ROAM_ADV_RX,
#ifdef CONFIG_BATMAN_ADV_DAT
BATADV_CNT_DAT_GET_TX,
BATADV_CNT_DAT_GET_RX,
BATADV_CNT_DAT_PUT_TX,
BATADV_CNT_DAT_PUT_RX,
BATADV_CNT_DAT_CACHED_REPLY_TX,
#endif
#ifdef CONFIG_BATMAN_ADV_NC
BATADV_CNT_NC_CODE,
BATADV_CNT_NC_CODE_BYTES,
BATADV_CNT_NC_RECODE,
BATADV_CNT_NC_RECODE_BYTES,
BATADV_CNT_NC_BUFFER,
BATADV_CNT_NC_DECODE,
BATADV_CNT_NC_DECODE_BYTES,
BATADV_CNT_NC_DECODE_FAILED,
BATADV_CNT_NC_SNIFFED,
#endif
BATADV_CNT_NUM,
};
/**
* struct batadv_priv_tt - per mesh interface translation table data
* @vn: translation table version number
* @ogm_append_cnt: counter of number of OGMs containing the local tt diff
* @local_changes: changes registered in an originator interval
* @changes_list: tracks tt local changes within an originator interval
* @local_hash: local translation table hash table
* @global_hash: global translation table hash table
* @req_list: list of pending & unanswered tt_requests
* @roam_list: list of the last roaming events of each client limiting the
* number of roaming events to avoid route flapping
* @changes_list_lock: lock protecting changes_list
* @req_list_lock: lock protecting req_list
* @roam_list_lock: lock protecting roam_list
* @last_changeset: last tt changeset this host has generated
* @last_changeset_len: length of last tt changeset this host has generated
* @last_changeset_lock: lock protecting last_changeset & last_changeset_len
* @commit_lock: prevents from executing a local TT commit while reading the
* local table. The local TT commit is made up by two operations (data
* structure update and metdata -CRC/TTVN- recalculation) and they have to be
* executed atomically in order to avoid another thread to read the
* table/metadata between those.
* @work: work queue callback item for translation table purging
*/
struct batadv_priv_tt {
atomic_t vn;
atomic_t ogm_append_cnt;
atomic_t local_changes;
struct list_head changes_list;
struct batadv_hashtable *local_hash;
struct batadv_hashtable *global_hash;
struct list_head req_list;
struct list_head roam_list;
spinlock_t changes_list_lock; /* protects changes */
spinlock_t req_list_lock; /* protects req_list */
spinlock_t roam_list_lock; /* protects roam_list */
unsigned char *last_changeset;
s16 last_changeset_len;
/* protects last_changeset & last_changeset_len */
spinlock_t last_changeset_lock;
/* prevents from executing a commit while reading the table */
spinlock_t commit_lock;
struct delayed_work work;
};
/**
* struct batadv_priv_bla - per mesh interface bridge loope avoidance data
* @num_requests; number of bla requests in flight
* @claim_hash: hash table containing mesh nodes this host has claimed
* @backbone_hash: hash table containing all detected backbone gateways
* @bcast_duplist: recently received broadcast packets array (for broadcast
* duplicate suppression)
* @bcast_duplist_curr: index of last broadcast packet added to bcast_duplist
* @bcast_duplist_lock: lock protecting bcast_duplist & bcast_duplist_curr
* @claim_dest: local claim data (e.g. claim group)
* @work: work queue callback item for cleanups & bla announcements
*/
#ifdef CONFIG_BATMAN_ADV_BLA
struct batadv_priv_bla {
atomic_t num_requests;
struct batadv_hashtable *claim_hash;
struct batadv_hashtable *backbone_hash;
struct batadv_bcast_duplist_entry bcast_duplist[BATADV_DUPLIST_SIZE];
int bcast_duplist_curr;
/* protects bcast_duplist & bcast_duplist_curr */
spinlock_t bcast_duplist_lock;
struct batadv_bla_claim_dst claim_dest;
struct delayed_work work;
};
#endif
/**
* struct batadv_priv_debug_log - debug logging data
* @log_buff: buffer holding the logs (ring bufer)
* @log_start: index of next character to read
* @log_end: index of next character to write
* @lock: lock protecting log_buff, log_start & log_end
* @queue_wait: log reader's wait queue
*/
#ifdef CONFIG_BATMAN_ADV_DEBUG
struct batadv_priv_debug_log {
char log_buff[BATADV_LOG_BUF_LEN];
unsigned long log_start;
unsigned long log_end;
spinlock_t lock; /* protects log_buff, log_start and log_end */
wait_queue_head_t queue_wait;
};
#endif
/**
* struct batadv_priv_gw - per mesh interface gateway data
* @list: list of available gateway nodes
* @list_lock: lock protecting gw_list & curr_gw
* @curr_gw: pointer to currently selected gateway node
* @bandwidth_down: advertised uplink download bandwidth (if gw_mode server)
* @bandwidth_up: advertised uplink upload bandwidth (if gw_mode server)
* @reselect: bool indicating a gateway re-selection is in progress
*/
struct batadv_priv_gw {
struct hlist_head list;
spinlock_t list_lock; /* protects gw_list & curr_gw */
struct batadv_gw_node __rcu *curr_gw; /* rcu protected pointer */
atomic_t bandwidth_down;
atomic_t bandwidth_up;
atomic_t reselect;
};
/**
* struct batadv_priv_tvlv - per mesh interface tvlv data
* @container_list: list of registered tvlv containers to be sent with each OGM
* @handler_list: list of the various tvlv content handlers
* @container_list_lock: protects tvlv container list access
* @handler_list_lock: protects handler list access
*/
struct batadv_priv_tvlv {
struct hlist_head container_list;
struct hlist_head handler_list;
spinlock_t container_list_lock; /* protects container_list */
spinlock_t handler_list_lock; /* protects handler_list */
};
/**
* struct batadv_priv_dat - per mesh interface DAT private data
* @addr: node DAT address
* @hash: hashtable representing the local ARP cache
* @work: work queue callback item for cache purging
*/
#ifdef CONFIG_BATMAN_ADV_DAT
struct batadv_priv_dat {
batadv_dat_addr_t addr;
struct batadv_hashtable *hash;
struct delayed_work work;
};
#endif
#ifdef CONFIG_BATMAN_ADV_MCAST
/**
* struct batadv_priv_mcast - per mesh interface mcast data
* @mla_list: list of multicast addresses we are currently announcing via TT
* @want_all_unsnoopables_list: a list of orig_nodes wanting all unsnoopable
* multicast traffic
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @want_all_ipv4_list: a list of orig_nodes wanting all IPv4 multicast traffic
* @want_all_ipv6_list: a list of orig_nodes wanting all IPv6 multicast traffic
* @flags: the flags we have last sent in our mcast tvlv
* @enabled: whether the multicast tvlv is currently enabled
* @num_disabled: number of nodes that have no mcast tvlv
* @num_want_all_unsnoopables: number of nodes wanting unsnoopable IP traffic
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
* @num_want_all_ipv4: counter for items in want_all_ipv4_list
* @num_want_all_ipv6: counter for items in want_all_ipv6_list
* @want_lists_lock: lock for protecting modifications to mcast want lists
* (traversals are rcu-locked)
*/
struct batadv_priv_mcast {
struct hlist_head mla_list;
struct hlist_head want_all_unsnoopables_list;
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
struct hlist_head want_all_ipv4_list;
struct hlist_head want_all_ipv6_list;
u8 flags;
bool enabled;
atomic_t num_disabled;
atomic_t num_want_all_unsnoopables;
batman-adv: Send multicast packets to nodes with a WANT_ALL flag With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-16 00:47:54 +08:00
atomic_t num_want_all_ipv4;
atomic_t num_want_all_ipv6;
/* protects want_all_{unsnoopables,ipv4,ipv6}_list */
spinlock_t want_lists_lock;
};
#endif
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
/**
* struct batadv_priv_nc - per mesh interface network coding private data
* @work: work queue callback item for cleanup
* @debug_dir: dentry for nc subdir in batman-adv directory in debugfs
* @min_tq: only consider neighbors for encoding if neigh_tq > min_tq
* @max_fwd_delay: maximum packet forward delay to allow coding of packets
* @max_buffer_time: buffer time for sniffed packets used to decoding
* @timestamp_fwd_flush: timestamp of last forward packet queue flush
* @timestamp_sniffed_purge: timestamp of last sniffed packet queue purge
* @coding_hash: Hash table used to buffer skbs while waiting for another
* incoming skb to code it with. Skbs are added to the buffer just before being
* forwarded in routing.c
* @decoding_hash: Hash table used to buffer skbs that might be needed to decode
* a received coded skb. The buffer is used for 1) skbs arriving on the
* soft-interface; 2) skbs overheard on the hard-interface; and 3) skbs
* forwarded by batman-adv.
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
*/
struct batadv_priv_nc {
struct delayed_work work;
struct dentry *debug_dir;
u8 min_tq;
u32 max_fwd_delay;
u32 max_buffer_time;
unsigned long timestamp_fwd_flush;
unsigned long timestamp_sniffed_purge;
struct batadv_hashtable *coding_hash;
struct batadv_hashtable *decoding_hash;
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
};
/**
* struct batadv_softif_vlan - per VLAN attributes set
* @bat_priv: pointer to the mesh object
* @vid: VLAN identifier
* @kobj: kobject for sysfs vlan subdirectory
* @ap_isolation: AP isolation state
* @tt: TT private attributes (VLAN specific)
* @list: list node for bat_priv::softif_vlan_list
* @refcount: number of context where this object is currently in use
* @rcu: struct used for freeing in a RCU-safe manner
*/
struct batadv_softif_vlan {
struct batadv_priv *bat_priv;
unsigned short vid;
struct kobject *kobj;
atomic_t ap_isolation; /* boolean */
struct batadv_vlan_tt tt;
struct hlist_node list;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_priv - per mesh interface data
* @mesh_state: current status of the mesh (inactive/active/deactivating)
* @soft_iface: net device which holds this struct as private data
* @stats: structure holding the data for the ndo_get_stats() call
* @bat_counters: mesh internal traffic statistic counters (see batadv_counters)
* @aggregated_ogms: bool indicating whether OGM aggregation is enabled
* @bonding: bool indicating whether traffic bonding is enabled
* @fragmentation: bool indicating whether traffic fragmentation is enabled
* @packet_size_max: max packet size that can be transmitted via
* multiple fragmented skbs or a single frame if fragmentation is disabled
* @frag_seqno: incremental counter to identify chains of egress fragments
* @bridge_loop_avoidance: bool indicating whether bridge loop avoidance is
* enabled
* @distributed_arp_table: bool indicating whether distributed ARP table is
* enabled
* @multicast_mode: Enable or disable multicast optimizations on this node's
* sender/originating side
* @gw_mode: gateway operation: off, client or server (see batadv_gw_modes)
* @gw_sel_class: gateway selection class (applies if gw_mode client)
* @orig_interval: OGM broadcast interval in milliseconds
* @hop_penalty: penalty which will be applied to an OGM's tq-field on every hop
* @log_level: configured log level (see batadv_dbg_level)
* @bcast_seqno: last sent broadcast packet sequence number
* @bcast_queue_left: number of remaining buffered broadcast packet slots
* @batman_queue_left: number of remaining OGM packet slots
* @num_ifaces: number of interfaces assigned to this mesh interface
* @mesh_obj: kobject for sysfs mesh subdirectory
* @debug_dir: dentry for debugfs batman-adv subdirectory
* @forw_bat_list: list of aggregated OGMs that will be forwarded
* @forw_bcast_list: list of broadcast packets that will be rebroadcasted
* @orig_hash: hash table containing mesh participants (orig nodes)
* @forw_bat_list_lock: lock protecting forw_bat_list
* @forw_bcast_list_lock: lock protecting forw_bcast_list
* @orig_work: work queue callback item for orig node purging
* @cleanup_work: work queue callback item for soft interface deinit
* @primary_if: one of the hard interfaces assigned to this mesh interface
* becomes the primary interface
* @bat_algo_ops: routing algorithm used by this mesh interface
* @softif_vlan_list: a list of softif_vlan structs, one per VLAN created on top
* of the mesh interface represented by this object
* @softif_vlan_list_lock: lock protecting softif_vlan_list
* @bla: bridge loope avoidance data
* @debug_log: holding debug logging relevant data
* @gw: gateway data
* @tt: translation table data
* @tvlv: type-version-length-value data
* @dat: distributed arp table data
* @mcast: multicast data
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
* @network_coding: bool indicating whether network coding is enabled
* @batadv_priv_nc: network coding data
*/
struct batadv_priv {
atomic_t mesh_state;
struct net_device *soft_iface;
struct net_device_stats stats;
u64 __percpu *bat_counters; /* Per cpu counters */
atomic_t aggregated_ogms;
atomic_t bonding;
atomic_t fragmentation;
atomic_t packet_size_max;
atomic_t frag_seqno;
#ifdef CONFIG_BATMAN_ADV_BLA
atomic_t bridge_loop_avoidance;
#endif
#ifdef CONFIG_BATMAN_ADV_DAT
atomic_t distributed_arp_table;
#endif
#ifdef CONFIG_BATMAN_ADV_MCAST
atomic_t multicast_mode;
#endif
atomic_t gw_mode;
atomic_t gw_sel_class;
atomic_t orig_interval;
atomic_t hop_penalty;
#ifdef CONFIG_BATMAN_ADV_DEBUG
atomic_t log_level;
#endif
u32 isolation_mark;
u32 isolation_mark_mask;
atomic_t bcast_seqno;
atomic_t bcast_queue_left;
atomic_t batman_queue_left;
char num_ifaces;
struct kobject *mesh_obj;
struct dentry *debug_dir;
struct hlist_head forw_bat_list;
struct hlist_head forw_bcast_list;
struct batadv_hashtable *orig_hash;
spinlock_t forw_bat_list_lock; /* protects forw_bat_list */
spinlock_t forw_bcast_list_lock; /* protects forw_bcast_list */
struct delayed_work orig_work;
struct work_struct cleanup_work;
struct batadv_hard_iface __rcu *primary_if; /* rcu protected pointer */
struct batadv_algo_ops *bat_algo_ops;
struct hlist_head softif_vlan_list;
spinlock_t softif_vlan_list_lock; /* protects softif_vlan_list */
#ifdef CONFIG_BATMAN_ADV_BLA
struct batadv_priv_bla bla;
#endif
#ifdef CONFIG_BATMAN_ADV_DEBUG
struct batadv_priv_debug_log *debug_log;
#endif
struct batadv_priv_gw gw;
struct batadv_priv_tt tt;
struct batadv_priv_tvlv tvlv;
#ifdef CONFIG_BATMAN_ADV_DAT
struct batadv_priv_dat dat;
#endif
#ifdef CONFIG_BATMAN_ADV_MCAST
struct batadv_priv_mcast mcast;
#endif
batman-adv: network coding - add the initial infrastructure code Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-25 18:12:38 +08:00
#ifdef CONFIG_BATMAN_ADV_NC
atomic_t network_coding;
struct batadv_priv_nc nc;
#endif /* CONFIG_BATMAN_ADV_NC */
};
/**
* struct batadv_socket_client - layer2 icmp socket client data
* @queue_list: packet queue for packets destined for this socket client
* @queue_len: number of packets in the packet queue (queue_list)
* @index: socket client's index in the batadv_socket_client_hash
* @lock: lock protecting queue_list, queue_len & index
* @queue_wait: socket client's wait queue
* @bat_priv: pointer to soft_iface this client belongs to
*/
struct batadv_socket_client {
struct list_head queue_list;
unsigned int queue_len;
unsigned char index;
spinlock_t lock; /* protects queue_list, queue_len & index */
wait_queue_head_t queue_wait;
struct batadv_priv *bat_priv;
};
/**
* struct batadv_socket_packet - layer2 icmp packet for socket client
* @list: list node for batadv_socket_client::queue_list
* @icmp_len: size of the layer2 icmp packet
* @icmp_packet: layer2 icmp packet
*/
struct batadv_socket_packet {
struct list_head list;
size_t icmp_len;
u8 icmp_packet[BATADV_ICMP_MAX_PACKET_SIZE];
};
/**
* struct batadv_bla_backbone_gw - batman-adv gateway bridged into the LAN
* @orig: originator address of backbone node (mac address of primary iface)
* @vid: vlan id this gateway was detected on
* @hash_entry: hlist node for batadv_priv_bla::backbone_hash
* @bat_priv: pointer to soft_iface this backbone gateway belongs to
* @lasttime: last time we heard of this backbone gw
* @wait_periods: grace time for bridge forward delays and bla group forming at
* bootup phase - no bcast traffic is formwared until it has elapsed
* @request_sent: if this bool is set to true we are out of sync with this
* backbone gateway - no bcast traffic is formwared until the situation was
* resolved
* @crc: crc16 checksum over all claims
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
#ifdef CONFIG_BATMAN_ADV_BLA
struct batadv_bla_backbone_gw {
u8 orig[ETH_ALEN];
unsigned short vid;
struct hlist_node hash_entry;
struct batadv_priv *bat_priv;
unsigned long lasttime;
atomic_t wait_periods;
atomic_t request_sent;
u16 crc;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_bla_claim - claimed non-mesh client structure
* @addr: mac address of claimed non-mesh client
* @vid: vlan id this client was detected on
* @batadv_bla_backbone_gw: pointer to backbone gw claiming this client
* @lasttime: last time we heard of claim (locals only)
* @hash_entry: hlist node for batadv_priv_bla::claim_hash
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_bla_claim {
u8 addr[ETH_ALEN];
unsigned short vid;
struct batadv_bla_backbone_gw *backbone_gw;
unsigned long lasttime;
struct hlist_node hash_entry;
struct rcu_head rcu;
atomic_t refcount;
};
#endif
/**
* struct batadv_tt_common_entry - tt local & tt global common data
* @addr: mac address of non-mesh client
* @vid: VLAN identifier
* @hash_entry: hlist node for batadv_priv_tt::local_hash or for
* batadv_priv_tt::global_hash
* @flags: various state handling flags (see batadv_tt_client_flags)
* @added_at: timestamp used for purging stale tt common entries
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_tt_common_entry {
u8 addr[ETH_ALEN];
unsigned short vid;
struct hlist_node hash_entry;
u16 flags;
unsigned long added_at;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_tt_local_entry - translation table local entry data
* @common: general translation table data
* @last_seen: timestamp used for purging stale tt local entries
*/
struct batadv_tt_local_entry {
struct batadv_tt_common_entry common;
unsigned long last_seen;
};
/**
* struct batadv_tt_global_entry - translation table global entry data
* @common: general translation table data
* @orig_list: list of orig nodes announcing this non-mesh client
* @orig_list_count: number of items in the orig_list
* @list_lock: lock protecting orig_list
* @roam_at: time at which TT_GLOBAL_ROAM was set
*/
struct batadv_tt_global_entry {
struct batadv_tt_common_entry common;
struct hlist_head orig_list;
atomic_t orig_list_count;
spinlock_t list_lock; /* protects orig_list */
unsigned long roam_at;
};
/**
* struct batadv_tt_orig_list_entry - orig node announcing a non-mesh client
* @orig_node: pointer to orig node announcing this non-mesh client
* @ttvn: translation table version number which added the non-mesh client
* @list: list node for batadv_tt_global_entry::orig_list
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_tt_orig_list_entry {
struct batadv_orig_node *orig_node;
u8 ttvn;
struct hlist_node list;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_tt_change_node - structure for tt changes occurred
* @list: list node for batadv_priv_tt::changes_list
* @change: holds the actual translation table diff data
*/
struct batadv_tt_change_node {
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
struct list_head list;
struct batadv_tvlv_tt_change change;
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
};
/**
* struct batadv_tt_req_node - data to keep track of the tt requests in flight
* @addr: mac address address of the originator this request was sent to
* @issued_at: timestamp used for purging stale tt requests
* @list: list node for batadv_priv_tt::req_list
*/
struct batadv_tt_req_node {
u8 addr[ETH_ALEN];
batman-adv: improved client announcement mechanism The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-27 20:27:44 +08:00
unsigned long issued_at;
struct list_head list;
};
/**
* struct batadv_tt_roam_node - roaming client data
* @addr: mac address of the client in the roaming phase
* @counter: number of allowed roaming events per client within a single
* OGM interval (changes are committed with each OGM)
* @first_time: timestamp used for purging stale roaming node entries
* @list: list node for batadv_priv_tt::roam_list
*/
struct batadv_tt_roam_node {
u8 addr[ETH_ALEN];
atomic_t counter;
unsigned long first_time;
struct list_head list;
};
/**
* struct batadv_nc_node - network coding node
* @list: next and prev pointer for the list handling
* @addr: the node's mac address
* @refcount: number of contexts the object is used by
* @rcu: struct used for freeing in an RCU-safe manner
* @orig_node: pointer to corresponding orig node struct
* @last_seen: timestamp of last ogm received from this node
*/
struct batadv_nc_node {
struct list_head list;
u8 addr[ETH_ALEN];
atomic_t refcount;
struct rcu_head rcu;
struct batadv_orig_node *orig_node;
unsigned long last_seen;
};
/**
* struct batadv_nc_path - network coding path
* @hash_entry: next and prev pointer for the list handling
* @rcu: struct used for freeing in an RCU-safe manner
* @refcount: number of contexts the object is used by
* @packet_list: list of buffered packets for this path
* @packet_list_lock: access lock for packet list
* @next_hop: next hop (destination) of path
* @prev_hop: previous hop (source) of path
* @last_valid: timestamp for last validation of path
*/
struct batadv_nc_path {
struct hlist_node hash_entry;
struct rcu_head rcu;
atomic_t refcount;
struct list_head packet_list;
spinlock_t packet_list_lock; /* Protects packet_list */
u8 next_hop[ETH_ALEN];
u8 prev_hop[ETH_ALEN];
unsigned long last_valid;
};
/**
* struct batadv_nc_packet - network coding packet used when coding and
* decoding packets
* @list: next and prev pointer for the list handling
* @packet_id: crc32 checksum of skb data
* @timestamp: field containing the info when the packet was added to path
* @neigh_node: pointer to original next hop neighbor of skb
* @skb: skb which can be encoded or used for decoding
* @nc_path: pointer to path this nc packet is attached to
*/
struct batadv_nc_packet {
struct list_head list;
__be32 packet_id;
unsigned long timestamp;
struct batadv_neigh_node *neigh_node;
struct sk_buff *skb;
struct batadv_nc_path *nc_path;
};
/**
* struct batadv_skb_cb - control buffer structure used to store private data
* relevant to batman-adv in the skb->cb buffer in skbs.
* @decoded: Marks a skb as decoded, which is checked when searching for coding
* opportunities in network-coding.c
*/
struct batadv_skb_cb {
bool decoded;
};
/**
* struct batadv_forw_packet - structure for bcast packets to be sent/forwarded
* @list: list node for batadv_socket_client::queue_list
* @send_time: execution time for delayed_work (packet sending)
* @own: bool for locally generated packets (local OGMs are re-scheduled after
* sending)
* @skb: bcast packet's skb buffer
* @packet_len: size of aggregated OGM packet inside the skb buffer
* @direct_link_flags: direct link flags for aggregated OGM packets
* @num_packets: counter for bcast packet retransmission
* @delayed_work: work queue callback item for packet sending
* @if_incoming: pointer to incoming hard-iface or primary iface if
* locally generated packet
* @if_outgoing: packet where the packet should be sent to, or NULL if
* unspecified
*/
struct batadv_forw_packet {
struct hlist_node list;
unsigned long send_time;
u8 own;
struct sk_buff *skb;
u16 packet_len;
u32 direct_link_flags;
u8 num_packets;
struct delayed_work delayed_work;
struct batadv_hard_iface *if_incoming;
struct batadv_hard_iface *if_outgoing;
};
/**
* struct batadv_algo_ops - mesh algorithm callbacks
* @list: list node for the batadv_algo_list
* @name: name of the algorithm
* @bat_iface_enable: init routing info when hard-interface is enabled
* @bat_iface_disable: de-init routing info when hard-interface is disabled
* @bat_iface_update_mac: (re-)init mac addresses of the protocol information
* belonging to this hard-interface
* @bat_primary_iface_set: called when primary interface is selected / changed
* @bat_ogm_schedule: prepare a new outgoing OGM for the send queue
* @bat_ogm_emit: send scheduled OGM
* @bat_neigh_cmp: compare the metrics of two neighbors for their respective
* outgoing interfaces
* @bat_neigh_is_equiv_or_better: check if neigh1 is equally good or better
* than neigh2 for their respective outgoing interface from the metric
* prospective
* @bat_neigh_free: free the resources allocated by the routing algorithm for a
* neigh_node object
* @bat_orig_print: print the originator table (optional)
* @bat_orig_free: free the resources allocated by the routing algorithm for an
* orig_node object
* @bat_orig_add_if: ask the routing algorithm to apply the needed changes to
* the orig_node due to a new hard-interface being added into the mesh
* @bat_orig_del_if: ask the routing algorithm to apply the needed changes to
* the orig_node due to an hard-interface being removed from the mesh
*/
struct batadv_algo_ops {
struct hlist_node list;
char *name;
int (*bat_iface_enable)(struct batadv_hard_iface *hard_iface);
void (*bat_iface_disable)(struct batadv_hard_iface *hard_iface);
void (*bat_iface_update_mac)(struct batadv_hard_iface *hard_iface);
void (*bat_primary_iface_set)(struct batadv_hard_iface *hard_iface);
void (*bat_ogm_schedule)(struct batadv_hard_iface *hard_iface);
void (*bat_ogm_emit)(struct batadv_forw_packet *forw_packet);
/* neigh_node handling API */
int (*bat_neigh_cmp)(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2);
bool (*bat_neigh_is_equiv_or_better)
(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2);
void (*bat_neigh_free)(struct batadv_neigh_node *neigh);
/* orig_node handling API */
void (*bat_orig_print)(struct batadv_priv *priv, struct seq_file *seq,
struct batadv_hard_iface *hard_iface);
void (*bat_orig_free)(struct batadv_orig_node *orig_node);
int (*bat_orig_add_if)(struct batadv_orig_node *orig_node,
int max_if_num);
int (*bat_orig_del_if)(struct batadv_orig_node *orig_node,
int max_if_num, int del_if_num);
};
/**
* struct batadv_dat_entry - it is a single entry of batman-adv ARP backend. It
* is used to stored ARP entries needed for the global DAT cache
* @ip: the IPv4 corresponding to this DAT/ARP entry
* @mac_addr: the MAC address associated to the stored IPv4
* @vid: the vlan ID associated to this entry
* @last_update: time in jiffies when this entry was refreshed last time
* @hash_entry: hlist node for batadv_priv_dat::hash
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_dat_entry {
__be32 ip;
u8 mac_addr[ETH_ALEN];
unsigned short vid;
unsigned long last_update;
struct hlist_node hash_entry;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* struct batadv_hw_addr - a list entry for a MAC address
* @list: list node for the linking of entries
* @addr: the MAC address of this list entry
*/
struct batadv_hw_addr {
struct hlist_node list;
unsigned char addr[ETH_ALEN];
};
/**
* struct batadv_dat_candidate - candidate destination for DAT operations
* @type: the type of the selected candidate. It can one of the following:
* - BATADV_DAT_CANDIDATE_NOT_FOUND
* - BATADV_DAT_CANDIDATE_ORIG
* @orig_node: if type is BATADV_DAT_CANDIDATE_ORIG this field points to the
* corresponding originator node structure
*/
struct batadv_dat_candidate {
int type;
struct batadv_orig_node *orig_node;
};
/**
* struct batadv_tvlv_container - container for tvlv appended to OGMs
* @list: hlist node for batadv_priv_tvlv::container_list
* @tvlv_hdr: tvlv header information needed to construct the tvlv
* @value_len: length of the buffer following this struct which contains
* the actual tvlv payload
* @refcount: number of contexts the object is used
*/
struct batadv_tvlv_container {
struct hlist_node list;
struct batadv_tvlv_hdr tvlv_hdr;
atomic_t refcount;
};
/**
* struct batadv_tvlv_handler - handler for specific tvlv type and version
* @list: hlist node for batadv_priv_tvlv::handler_list
* @ogm_handler: handler callback which is given the tvlv payload to process on
* incoming OGM packets
* @unicast_handler: handler callback which is given the tvlv payload to process
* on incoming unicast tvlv packets
* @type: tvlv type this handler feels responsible for
* @version: tvlv version this handler feels responsible for
* @flags: tvlv handler flags
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
struct batadv_tvlv_handler {
struct hlist_node list;
void (*ogm_handler)(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig,
u8 flags, void *tvlv_value, u16 tvlv_value_len);
int (*unicast_handler)(struct batadv_priv *bat_priv,
u8 *src, u8 *dst,
void *tvlv_value, u16 tvlv_value_len);
u8 type;
u8 version;
u8 flags;
atomic_t refcount;
struct rcu_head rcu;
};
/**
* enum batadv_tvlv_handler_flags - tvlv handler flags definitions
* @BATADV_TVLV_HANDLER_OGM_CIFNOTFND: tvlv ogm processing function will call
* this handler even if its type was not found (with no data)
* @BATADV_TVLV_HANDLER_OGM_CALLED: interval tvlv handling flag - the API marks
* a handler as being called, so it won't be called if the
* BATADV_TVLV_HANDLER_OGM_CIFNOTFND flag was set
*/
enum batadv_tvlv_handler_flags {
BATADV_TVLV_HANDLER_OGM_CIFNOTFND = BIT(1),
BATADV_TVLV_HANDLER_OGM_CALLED = BIT(2),
};
#endif /* _NET_BATMAN_ADV_TYPES_H_ */