linux/drivers/s390/char/sclp_early_core.c

349 lines
8.7 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 2015
* Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
#include <linux/kernel.h>
#include <asm/processor.h>
#include <asm/lowcore.h>
#include <asm/ebcdic.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/mem_detect.h>
#include <asm/facility.h>
#include "sclp.h"
#include "sclp_rw.h"
static struct read_info_sccb __bootdata(sclp_info_sccb);
static int __bootdata(sclp_info_sccb_valid);
char *sclp_early_sccb = (char *) EARLY_SCCB_OFFSET;
int sclp_init_state = sclp_init_state_uninitialized;
/*
* Used to keep track of the size of the event masks. Qemu until version 2.11
* only supports 4 and needs a workaround.
*/
bool sclp_mask_compat_mode;
void sclp_early_wait_irq(void)
{
unsigned long psw_mask, addr;
psw_t psw_ext_save, psw_wait;
union ctlreg0 cr0, cr0_new;
__ctl_store(cr0.val, 0, 0);
cr0_new.val = cr0.val & ~CR0_IRQ_SUBCLASS_MASK;
cr0_new.lap = 0;
cr0_new.sssm = 1;
__ctl_load(cr0_new.val, 0, 0);
psw_ext_save = S390_lowcore.external_new_psw;
psw_mask = __extract_psw();
S390_lowcore.external_new_psw.mask = psw_mask;
psw_wait.mask = psw_mask | PSW_MASK_EXT | PSW_MASK_WAIT;
S390_lowcore.ext_int_code = 0;
do {
asm volatile(
" larl %[addr],0f\n"
" stg %[addr],%[psw_wait_addr]\n"
" stg %[addr],%[psw_ext_addr]\n"
" lpswe %[psw_wait]\n"
"0:\n"
: [addr] "=&d" (addr),
[psw_wait_addr] "=Q" (psw_wait.addr),
[psw_ext_addr] "=Q" (S390_lowcore.external_new_psw.addr)
: [psw_wait] "Q" (psw_wait)
: "cc", "memory");
} while (S390_lowcore.ext_int_code != EXT_IRQ_SERVICE_SIG);
S390_lowcore.external_new_psw = psw_ext_save;
__ctl_load(cr0.val, 0, 0);
}
int sclp_early_cmd(sclp_cmdw_t cmd, void *sccb)
{
unsigned long flags;
int rc;
raw_local_irq_save(flags);
rc = sclp_service_call(cmd, sccb);
if (rc)
goto out;
sclp_early_wait_irq();
out:
raw_local_irq_restore(flags);
return rc;
}
struct write_sccb {
struct sccb_header header;
struct msg_buf msg;
} __packed;
/* Output multi-line text using SCLP Message interface. */
static void sclp_early_print_lm(const char *str, unsigned int len)
{
unsigned char *ptr, *end, ch;
unsigned int count, offset;
struct write_sccb *sccb;
struct msg_buf *msg;
struct mdb *mdb;
struct mto *mto;
struct go *go;
sccb = (struct write_sccb *) sclp_early_sccb;
end = (unsigned char *) sccb + EARLY_SCCB_SIZE - 1;
memset(sccb, 0, sizeof(*sccb));
ptr = (unsigned char *) &sccb->msg.mdb.mto;
offset = 0;
do {
for (count = sizeof(*mto); offset < len; count++) {
ch = str[offset++];
if ((ch == 0x0a) || (ptr + count > end))
break;
ptr[count] = _ascebc[ch];
}
mto = (struct mto *) ptr;
memset(mto, 0, sizeof(*mto));
mto->length = count;
mto->type = 4;
mto->line_type_flags = LNTPFLGS_ENDTEXT;
ptr += count;
} while ((offset < len) && (ptr + sizeof(*mto) <= end));
len = ptr - (unsigned char *) sccb;
sccb->header.length = len - offsetof(struct write_sccb, header);
msg = &sccb->msg;
msg->header.type = EVTYP_MSG;
msg->header.length = len - offsetof(struct write_sccb, msg.header);
mdb = &msg->mdb;
mdb->header.type = 1;
mdb->header.tag = 0xD4C4C240;
mdb->header.revision_code = 1;
mdb->header.length = len - offsetof(struct write_sccb, msg.mdb.header);
go = &mdb->go;
go->length = sizeof(*go);
go->type = 1;
sclp_early_cmd(SCLP_CMDW_WRITE_EVENT_DATA, sccb);
}
struct vt220_sccb {
struct sccb_header header;
struct {
struct evbuf_header header;
char data[];
} msg;
} __packed;
/* Output multi-line text using SCLP VT220 interface. */
static void sclp_early_print_vt220(const char *str, unsigned int len)
{
struct vt220_sccb *sccb;
sccb = (struct vt220_sccb *) sclp_early_sccb;
if (sizeof(*sccb) + len >= EARLY_SCCB_SIZE)
len = EARLY_SCCB_SIZE - sizeof(*sccb);
memset(sccb, 0, sizeof(*sccb));
memcpy(&sccb->msg.data, str, len);
sccb->header.length = sizeof(*sccb) + len;
sccb->msg.header.length = sizeof(sccb->msg) + len;
sccb->msg.header.type = EVTYP_VT220MSG;
sclp_early_cmd(SCLP_CMDW_WRITE_EVENT_DATA, sccb);
}
int sclp_early_set_event_mask(struct init_sccb *sccb,
sccb_mask_t receive_mask,
sccb_mask_t send_mask)
{
retry:
memset(sccb, 0, sizeof(*sccb));
sccb->header.length = sizeof(*sccb);
if (sclp_mask_compat_mode)
sccb->mask_length = SCLP_MASK_SIZE_COMPAT;
else
sccb->mask_length = sizeof(sccb_mask_t);
sccb_set_recv_mask(sccb, receive_mask);
sccb_set_send_mask(sccb, send_mask);
if (sclp_early_cmd(SCLP_CMDW_WRITE_EVENT_MASK, sccb))
return -EIO;
if ((sccb->header.response_code == 0x74f0) && !sclp_mask_compat_mode) {
sclp_mask_compat_mode = true;
goto retry;
}
if (sccb->header.response_code != 0x20)
return -EIO;
return 0;
}
unsigned int sclp_early_con_check_linemode(struct init_sccb *sccb)
{
if (!(sccb_get_sclp_send_mask(sccb) & EVTYP_OPCMD_MASK))
return 0;
if (!(sccb_get_sclp_recv_mask(sccb) & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK)))
return 0;
return 1;
}
unsigned int sclp_early_con_check_vt220(struct init_sccb *sccb)
{
if (sccb_get_sclp_send_mask(sccb) & EVTYP_VT220MSG_MASK)
return 1;
return 0;
}
static int sclp_early_setup(int disable, int *have_linemode, int *have_vt220)
{
unsigned long receive_mask, send_mask;
struct init_sccb *sccb;
int rc;
BUILD_BUG_ON(sizeof(struct init_sccb) > PAGE_SIZE);
*have_linemode = *have_vt220 = 0;
sccb = (struct init_sccb *) sclp_early_sccb;
receive_mask = disable ? 0 : EVTYP_OPCMD_MASK;
send_mask = disable ? 0 : EVTYP_VT220MSG_MASK | EVTYP_MSG_MASK;
rc = sclp_early_set_event_mask(sccb, receive_mask, send_mask);
if (rc)
return rc;
*have_linemode = sclp_early_con_check_linemode(sccb);
*have_vt220 = !!(sccb_get_send_mask(sccb) & EVTYP_VT220MSG_MASK);
return rc;
}
/*
* Output one or more lines of text on the SCLP console (VT220 and /
* or line-mode).
*/
void __sclp_early_printk(const char *str, unsigned int len)
{
int have_linemode, have_vt220;
if (sclp_init_state != sclp_init_state_uninitialized)
return;
if (sclp_early_setup(0, &have_linemode, &have_vt220) != 0)
return;
if (have_linemode)
sclp_early_print_lm(str, len);
if (have_vt220)
sclp_early_print_vt220(str, len);
sclp_early_setup(1, &have_linemode, &have_vt220);
}
void sclp_early_printk(const char *str)
{
__sclp_early_printk(str, strlen(str));
}
int __init sclp_early_read_info(void)
{
int i;
int length = test_facility(140) ? EXT_SCCB_READ_SCP : PAGE_SIZE;
struct read_info_sccb *sccb = &sclp_info_sccb;
sclp_cmdw_t commands[] = {SCLP_CMDW_READ_SCP_INFO_FORCED,
SCLP_CMDW_READ_SCP_INFO};
for (i = 0; i < ARRAY_SIZE(commands); i++) {
memset(sccb, 0, length);
sccb->header.length = length;
sccb->header.function_code = 0x80;
sccb->header.control_mask[2] = 0x80;
if (sclp_early_cmd(commands[i], sccb))
break;
if (sccb->header.response_code == 0x10) {
sclp_info_sccb_valid = 1;
return 0;
}
if (sccb->header.response_code != 0x1f0)
break;
}
return -EIO;
}
struct read_info_sccb * __init sclp_early_get_info(void)
{
if (!sclp_info_sccb_valid)
return NULL;
return &sclp_info_sccb;
}
int __init sclp_early_get_memsize(unsigned long *mem)
{
unsigned long rnmax;
unsigned long rnsize;
struct read_info_sccb *sccb = &sclp_info_sccb;
if (!sclp_info_sccb_valid)
return -EIO;
rnmax = sccb->rnmax ? sccb->rnmax : sccb->rnmax2;
rnsize = sccb->rnsize ? sccb->rnsize : sccb->rnsize2;
rnsize <<= 20;
*mem = rnsize * rnmax;
return 0;
}
int __init sclp_early_get_hsa_size(unsigned long *hsa_size)
{
if (!sclp_info_sccb_valid)
return -EIO;
*hsa_size = 0;
if (sclp_info_sccb.hsa_size)
*hsa_size = (sclp_info_sccb.hsa_size - 1) * PAGE_SIZE;
return 0;
}
#define SCLP_STORAGE_INFO_FACILITY 0x0000400000000000UL
void __weak __init add_mem_detect_block(u64 start, u64 end) {}
int __init sclp_early_read_storage_info(void)
{
struct read_storage_sccb *sccb = (struct read_storage_sccb *)sclp_early_sccb;
int rc, id, max_id = 0;
unsigned long rn, rzm;
sclp_cmdw_t command;
u16 sn;
if (!sclp_info_sccb_valid)
return -EIO;
if (!(sclp_info_sccb.facilities & SCLP_STORAGE_INFO_FACILITY))
return -EOPNOTSUPP;
rzm = sclp_info_sccb.rnsize ?: sclp_info_sccb.rnsize2;
rzm <<= 20;
for (id = 0; id <= max_id; id++) {
memset(sclp_early_sccb, 0, EARLY_SCCB_SIZE);
sccb->header.length = EARLY_SCCB_SIZE;
command = SCLP_CMDW_READ_STORAGE_INFO | (id << 8);
rc = sclp_early_cmd(command, sccb);
if (rc)
goto fail;
max_id = sccb->max_id;
switch (sccb->header.response_code) {
case 0x0010:
for (sn = 0; sn < sccb->assigned; sn++) {
if (!sccb->entries[sn])
continue;
rn = sccb->entries[sn] >> 16;
add_mem_detect_block((rn - 1) * rzm, rn * rzm);
}
break;
case 0x0310:
case 0x0410:
break;
default:
goto fail;
}
}
return 0;
fail:
mem_detect.count = 0;
return -EIO;
}