openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/sound/firewire/tascam/tascam.h

146 lines
4.3 KiB
C
Raw Normal View History

ALSA: firewire-tascam: add skeleton for TASCAM FireWire series This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:11 +08:00
/*
* tascam.h - a part of driver for TASCAM FireWire series
*
* Copyright (c) 2015 Takashi Sakamoto
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
#ifndef SOUND_TASCAM_H_INCLUDED
#define SOUND_TASCAM_H_INCLUDED
#include <linux/device.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/compat.h>
#include <sound/core.h>
#include <sound/initval.h>
ALSA: firewire-tascam: add proc node to show firmware information TASCAM FireWire series has certain registers for firmware information. This commit adds proc node to show the information. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:13 +08:00
#include <sound/info.h>
ALSA: firewire-tascam: add data block processing layer TASCAM FireWire series uses non-blocking transmission for AMDTP packet streaming, while the format of data blocks is unique. The CIP headers includes specific value in FMT field and no SYT information. In transmitted packets, the first data channel represents event counter, and the last data channel has status and control information. The rest has 24bit PCM samples with right padding. In received packets, all of data channels include 16, 24, 32bit PCM samples. There's no other kind of information. This commit adds support for this protocol. For convenience, the size of PCM samples in outgoing packet is limited by 16 and 24bit. The status and control information will be supported in future commits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:14 +08:00
#include <sound/pcm.h>
#include <sound/pcm_params.h>
ALSA: firewire-tascam: add hwdep interface This commit adds hwdep interface so as the other IEEE 1394 sound devices has. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:17 +08:00
#include <sound/firewire.h>
#include <sound/hwdep.h>
ALSA: firewire-tascam: add support for incoming MIDI messages by asynchronous transaction TASCAM FireWire series use asynchronous transaction to transfer MIDI messages. The transaction is sent to a registered address. This commit supports the incoming MIDI messages. The messages in the transaction include some quirks: * Two quadlets are used for one MIDI message and one timestamp. * Usually, the first byte of the first quadlet includes MIDI port and MSB 4 bit of MIDI status. For system exclusive message, the first byte includes MIDI port and 0x04, or 0x07 in the end of the message. * The rest of the first quadlet includes MIDI bytes up to 3. * Several set of MIDI messages and timestamp can be transferred in one block transaction, up to 8 sets. I note that TASCAM FireWire series ignores ID bytes of system exclusive message. When receiving system exclusive messages with ID bytes on physical MIDI bus, the series transfers the messages without ID bytes on IEEE 1394 bus, and vice versa. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:21 +08:00
#include <sound/rawmidi.h>
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:11 +08:00
#include "../lib.h"
ALSA: firewire-tascam: add data block processing layer TASCAM FireWire series uses non-blocking transmission for AMDTP packet streaming, while the format of data blocks is unique. The CIP headers includes specific value in FMT field and no SYT information. In transmitted packets, the first data channel represents event counter, and the last data channel has status and control information. The rest has 24bit PCM samples with right padding. In received packets, all of data channels include 16, 24, 32bit PCM samples. There's no other kind of information. This commit adds support for this protocol. For convenience, the size of PCM samples in outgoing packet is limited by 16 and 24bit. The status and control information will be supported in future commits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:14 +08:00
#include "../amdtp-stream.h"
ALSA: firewire-tascam: add streaming functionality This commit adds streaming functionality for both direction. To utilize the sequence of the number of data blocks in packets, full duplex with synchronization is applied. Besides, TASCAM FireWire series allows drivers to decide which PCM data channels are enabled. For convenience, this driver always enable whole the data channels. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:15 +08:00
#include "../iso-resources.h"
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:11 +08:00
ALSA: firewire-tascam: add a structure for model-dependent parameters. TASCAM FireWire series doesn't tell drivers their capabilities, thus the drivers should have model-dependent parameters and apply it to detected devices. This commit adds a structure to represent such parameters. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:12 +08:00
struct snd_tscm_spec {
const char *const name;
bool has_adat;
bool has_spdif;
unsigned int pcm_capture_analog_channels;
unsigned int pcm_playback_analog_channels;
unsigned int midi_capture_ports;
unsigned int midi_playback_ports;
bool is_controller;
};
ALSA: firewire-tascam: add support for incoming MIDI messages by asynchronous transaction TASCAM FireWire series use asynchronous transaction to transfer MIDI messages. The transaction is sent to a registered address. This commit supports the incoming MIDI messages. The messages in the transaction include some quirks: * Two quadlets are used for one MIDI message and one timestamp. * Usually, the first byte of the first quadlet includes MIDI port and MSB 4 bit of MIDI status. For system exclusive message, the first byte includes MIDI port and 0x04, or 0x07 in the end of the message. * The rest of the first quadlet includes MIDI bytes up to 3. * Several set of MIDI messages and timestamp can be transferred in one block transaction, up to 8 sets. I note that TASCAM FireWire series ignores ID bytes of system exclusive message. When receiving system exclusive messages with ID bytes on physical MIDI bus, the series transfers the messages without ID bytes on IEEE 1394 bus, and vice versa. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:21 +08:00
#define TSCM_MIDI_IN_PORT_MAX 4
#define TSCM_MIDI_OUT_PORT_MAX 4
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:11 +08:00
struct snd_tscm {
struct snd_card *card;
struct fw_unit *unit;
struct mutex mutex;
ALSA: firewire-tascam: add hwdep interface This commit adds hwdep interface so as the other IEEE 1394 sound devices has. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:17 +08:00
spinlock_t lock;
ALSA: firewire-tascam: add a structure for model-dependent parameters. TASCAM FireWire series doesn't tell drivers their capabilities, thus the drivers should have model-dependent parameters and apply it to detected devices. This commit adds a structure to represent such parameters. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:12 +08:00
const struct snd_tscm_spec *spec;
ALSA: firewire-tascam: add streaming functionality This commit adds streaming functionality for both direction. To utilize the sequence of the number of data blocks in packets, full duplex with synchronization is applied. Besides, TASCAM FireWire series allows drivers to decide which PCM data channels are enabled. For convenience, this driver always enable whole the data channels. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:15 +08:00
struct fw_iso_resources tx_resources;
struct fw_iso_resources rx_resources;
struct amdtp_stream tx_stream;
struct amdtp_stream rx_stream;
unsigned int substreams_counter;
ALSA: firewire-tascam: add hwdep interface This commit adds hwdep interface so as the other IEEE 1394 sound devices has. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:17 +08:00
int dev_lock_count;
bool dev_lock_changed;
wait_queue_head_t hwdep_wait;
ALSA: firewire-tascam: add support for incoming MIDI messages by asynchronous transaction TASCAM FireWire series use asynchronous transaction to transfer MIDI messages. The transaction is sent to a registered address. This commit supports the incoming MIDI messages. The messages in the transaction include some quirks: * Two quadlets are used for one MIDI message and one timestamp. * Usually, the first byte of the first quadlet includes MIDI port and MSB 4 bit of MIDI status. For system exclusive message, the first byte includes MIDI port and 0x04, or 0x07 in the end of the message. * The rest of the first quadlet includes MIDI bytes up to 3. * Several set of MIDI messages and timestamp can be transferred in one block transaction, up to 8 sets. I note that TASCAM FireWire series ignores ID bytes of system exclusive message. When receiving system exclusive messages with ID bytes on physical MIDI bus, the series transfers the messages without ID bytes on IEEE 1394 bus, and vice versa. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:21 +08:00
/* For MIDI message incoming transactions. */
struct fw_address_handler async_handler;
struct snd_rawmidi_substream *tx_midi_substreams[TSCM_MIDI_IN_PORT_MAX];
ALSA: firewire-tascam: add support for outgoing MIDI messages by asynchronous transaction TASCAM FireWire series use asynchronous transaction to receive MIDI messages. The transaction should be sent to a certain address. This commit supports the outgoing MIDI messages. The messages in the transaction includes some quirks: * One MIDI message is transferred in one quadlet transaction, except for system exclusives. * MIDI running status is not allowed, thus transactions always include status byte. * The basic data format is the same as transferring MIDI messages supported in previous commit. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:22 +08:00
/* For MIDI message outgoing transactions. */
struct snd_fw_async_midi_port out_ports[TSCM_MIDI_OUT_PORT_MAX];
u8 running_status[TSCM_MIDI_OUT_PORT_MAX];
bool on_sysex[TSCM_MIDI_OUT_PORT_MAX];
/* For control messages. */
struct snd_firewire_tascam_status *status;
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:11 +08:00
};
ALSA: firewire-tascam: add proc node to show firmware information TASCAM FireWire series has certain registers for firmware information. This commit adds proc node to show the information. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:13 +08:00
#define TSCM_ADDR_BASE 0xffff00000000ull
#define TSCM_OFFSET_FIRMWARE_REGISTER 0x0000
#define TSCM_OFFSET_FIRMWARE_FPGA 0x0004
#define TSCM_OFFSET_FIRMWARE_ARM 0x0008
#define TSCM_OFFSET_FIRMWARE_HW 0x000c
ALSA: firewire-tascam: add streaming functionality This commit adds streaming functionality for both direction. To utilize the sequence of the number of data blocks in packets, full duplex with synchronization is applied. Besides, TASCAM FireWire series allows drivers to decide which PCM data channels are enabled. For convenience, this driver always enable whole the data channels. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:15 +08:00
#define TSCM_OFFSET_ISOC_TX_CH 0x0200
#define TSCM_OFFSET_UNKNOWN 0x0204
#define TSCM_OFFSET_START_STREAMING 0x0208
#define TSCM_OFFSET_ISOC_RX_CH 0x020c
#define TSCM_OFFSET_ISOC_RX_ON 0x0210 /* Little conviction. */
#define TSCM_OFFSET_TX_PCM_CHANNELS 0x0214
#define TSCM_OFFSET_RX_PCM_CHANNELS 0x0218
#define TSCM_OFFSET_MULTIPLEX_MODE 0x021c
#define TSCM_OFFSET_ISOC_TX_ON 0x0220
/* Unknown 0x0224 */
#define TSCM_OFFSET_CLOCK_STATUS 0x0228
#define TSCM_OFFSET_SET_OPTION 0x022c
ALSA: firewire-tascam: add support for incoming MIDI messages by asynchronous transaction TASCAM FireWire series use asynchronous transaction to transfer MIDI messages. The transaction is sent to a registered address. This commit supports the incoming MIDI messages. The messages in the transaction include some quirks: * Two quadlets are used for one MIDI message and one timestamp. * Usually, the first byte of the first quadlet includes MIDI port and MSB 4 bit of MIDI status. For system exclusive message, the first byte includes MIDI port and 0x04, or 0x07 in the end of the message. * The rest of the first quadlet includes MIDI bytes up to 3. * Several set of MIDI messages and timestamp can be transferred in one block transaction, up to 8 sets. I note that TASCAM FireWire series ignores ID bytes of system exclusive message. When receiving system exclusive messages with ID bytes on physical MIDI bus, the series transfers the messages without ID bytes on IEEE 1394 bus, and vice versa. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:21 +08:00
#define TSCM_OFFSET_MIDI_TX_ON 0x0300
#define TSCM_OFFSET_MIDI_TX_ADDR_HI 0x0304
#define TSCM_OFFSET_MIDI_TX_ADDR_LO 0x0308
#define TSCM_OFFSET_MIDI_RX_QUAD 0x4000
ALSA: firewire-tascam: add streaming functionality This commit adds streaming functionality for both direction. To utilize the sequence of the number of data blocks in packets, full duplex with synchronization is applied. Besides, TASCAM FireWire series allows drivers to decide which PCM data channels are enabled. For convenience, this driver always enable whole the data channels. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:15 +08:00
enum snd_tscm_clock {
SND_TSCM_CLOCK_INTERNAL = 0,
SND_TSCM_CLOCK_WORD = 1,
SND_TSCM_CLOCK_SPDIF = 2,
SND_TSCM_CLOCK_ADAT = 3,
};
ALSA: firewire-tascam: add data block processing layer TASCAM FireWire series uses non-blocking transmission for AMDTP packet streaming, while the format of data blocks is unique. The CIP headers includes specific value in FMT field and no SYT information. In transmitted packets, the first data channel represents event counter, and the last data channel has status and control information. The rest has 24bit PCM samples with right padding. In received packets, all of data channels include 16, 24, 32bit PCM samples. There's no other kind of information. This commit adds support for this protocol. For convenience, the size of PCM samples in outgoing packet is limited by 16 and 24bit. The status and control information will be supported in future commits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:14 +08:00
int amdtp_tscm_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir, unsigned int pcm_channels);
int amdtp_tscm_set_parameters(struct amdtp_stream *s, unsigned int rate);
int amdtp_tscm_add_pcm_hw_constraints(struct amdtp_stream *s,
struct snd_pcm_runtime *runtime);
void amdtp_tscm_set_pcm_format(struct amdtp_stream *s, snd_pcm_format_t format);
ALSA: firewire-tascam: add streaming functionality This commit adds streaming functionality for both direction. To utilize the sequence of the number of data blocks in packets, full duplex with synchronization is applied. Besides, TASCAM FireWire series allows drivers to decide which PCM data channels are enabled. For convenience, this driver always enable whole the data channels. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:15 +08:00
int snd_tscm_stream_get_rate(struct snd_tscm *tscm, unsigned int *rate);
int snd_tscm_stream_get_clock(struct snd_tscm *tscm,
enum snd_tscm_clock *clock);
int snd_tscm_stream_init_duplex(struct snd_tscm *tscm);
void snd_tscm_stream_update_duplex(struct snd_tscm *tscm);
void snd_tscm_stream_destroy_duplex(struct snd_tscm *tscm);
int snd_tscm_stream_start_duplex(struct snd_tscm *tscm, unsigned int rate);
void snd_tscm_stream_stop_duplex(struct snd_tscm *tscm);
ALSA: firewire-tascam: add hwdep interface This commit adds hwdep interface so as the other IEEE 1394 sound devices has. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:17 +08:00
void snd_tscm_stream_lock_changed(struct snd_tscm *tscm);
int snd_tscm_stream_lock_try(struct snd_tscm *tscm);
void snd_tscm_stream_lock_release(struct snd_tscm *tscm);
ALSA: firewire-tascam: add support for incoming MIDI messages by asynchronous transaction TASCAM FireWire series use asynchronous transaction to transfer MIDI messages. The transaction is sent to a registered address. This commit supports the incoming MIDI messages. The messages in the transaction include some quirks: * Two quadlets are used for one MIDI message and one timestamp. * Usually, the first byte of the first quadlet includes MIDI port and MSB 4 bit of MIDI status. For system exclusive message, the first byte includes MIDI port and 0x04, or 0x07 in the end of the message. * The rest of the first quadlet includes MIDI bytes up to 3. * Several set of MIDI messages and timestamp can be transferred in one block transaction, up to 8 sets. I note that TASCAM FireWire series ignores ID bytes of system exclusive message. When receiving system exclusive messages with ID bytes on physical MIDI bus, the series transfers the messages without ID bytes on IEEE 1394 bus, and vice versa. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:21 +08:00
int snd_tscm_transaction_register(struct snd_tscm *tscm);
int snd_tscm_transaction_reregister(struct snd_tscm *tscm);
void snd_tscm_transaction_unregister(struct snd_tscm *tscm);
ALSA: firewire-tascam: add proc node to show firmware information TASCAM FireWire series has certain registers for firmware information. This commit adds proc node to show the information. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:13 +08:00
void snd_tscm_proc_init(struct snd_tscm *tscm);
ALSA: firewire-tascam: add PCM functionality This commit adds PCM functionality to transmit/receive PCM samples. When one of PCM substreams are running or external clock source is selected, current sampling rate is used. Else, the sampling rate is changed as an userspace application requests. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:16 +08:00
int snd_tscm_create_pcm_devices(struct snd_tscm *tscm);
ALSA: firewire-tascam: add support for MIDI functionality In former commits, this driver got functionalities to transfer/receive MIDI messages to/from TASCAM FireWire series. This commit adds some ALSA MIDI ports to enable userspace applications to use the functionalities. I note that this commit doesn't support virtual MIDI ports which console models support. A physical controls can be assigned to a certain MIDI ports including physical and virtual. But the way is not clear. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-12 18:10:23 +08:00
int snd_tscm_create_midi_devices(struct snd_tscm *tscm);
ALSA: firewire-tascam: add hwdep interface This commit adds hwdep interface so as the other IEEE 1394 sound devices has. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:17 +08:00
int snd_tscm_create_hwdep_device(struct snd_tscm *tscm);
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-01 21:02:11 +08:00
#endif