openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/configs/tegra_defconfig

303 lines
6.7 KiB
Plaintext
Raw Normal View History

ARM: tegra: defconfig updates Enable: * SYSVIPC (needed for some apps, e.g. fakeroot). * Elantech touchpad (touchpad on AC100). * SCSI_MULTI_LUN (needed for some USB SD card readers). * PCI, MSI, and Tegra's PCIe driver. * USB XHCI; useful for testing PCIe. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-24 00:03:01 +08:00
CONFIG_SYSVIPC=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: tegra: Update default configuration for v5.1-rc1 Most of the changes here are just symbols that are now enabled by default, have been removed, or which have been moved around and now appear in a different spot. The only notable change here is that BACKLIGHT_CLASS_DEVICE is now built-in. This is to allow BACKLIGHT_PWM to be built-in as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 17:02:29 +08:00
CONFIG_PREEMPT=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
ARM: tegra: Update default configuration for v4.9-rc1 Regenerate the default configuration on top of v4.9-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08 18:45:34 +08:00
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_DEBUG=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_BLK_DEV_INITRD=y
# CONFIG_ELF_CORE is not set
arm/tegra: refresh defconfig for tegra30 Update the defconfig for tegra due to the addition of tegra30 and rename of t20/t30 options. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-12-18 12:45:27 +08:00
CONFIG_EMBEDDED=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_PERF_EVENTS=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_SLAB=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_ARCH_TEGRA=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_SMP=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_KEXEC=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
ARM: tegra: Update default configuration * CPU frequency scaling for Tegra124 * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:58:51 +08:00
CONFIG_CPUFREQ_DT=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_CPU_IDLE=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_VFP=y
ARM: tegra: defconfig updates ARCH_TEGRA_124_SOC: Tegra124 SoC support. CPU_FREQ_STAT_DETAILS: Enables various sysfs files that are useful when testing cpufreq. CONFIG_COMMON_CLK_DEBUG: Useful to look at the clock tree to verify that clocks for the various devices have been properly set up. PINCTRL_PALMAS: Used on Dalmore board. NEON: Enables SIMD instruction support for Tegra30 and later SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-04 04:08:27 +08:00
CONFIG_NEON=y
ARM: tegra: Enable Trusted Foundations by default Support for the Trusted Foundations firmware was recently moved outside of arch/arm and now needs to be selected explicitly. Since some 32-bit Tegra devices use this firmware, enable support for it in the default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 17:11:28 +08:00
CONFIG_TRUSTED_FOUNDATIONS=y
ARM: tegra: Update default configuration for v5.1-rc1 Most of the changes here are just symbols that are now enabled by default, have been removed, or which have been moved around and now appear in a different spot. The only notable change here is that BACKLIGHT_CLASS_DEVICE is now built-in. This is to allow BACKLIGHT_PWM to be built-in as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 17:02:29 +08:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMA=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_INET_ESP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
ARM: tegra: tegra_defconfig updates AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 07:15:14 +08:00
CONFIG_CAN=y
CONFIG_CAN_MCP251X=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HCIBTUSB=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
ARM: tegra: Update default configuration for v5.1-rc1 Most of the changes here are just symbols that are now enabled by default, have been removed, or which have been moved around and now appear in a different spot. The only notable change here is that BACKLIGHT_CLASS_DEVICE is now built-in. This is to allow BACKLIGHT_PWM to be built-in as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 17:02:29 +08:00
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_PCI_TEGRA=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: tegra: Enable GMI driver in default configuration Enable the new Tegra GMI driver for the default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08 18:49:41 +08:00
CONFIG_TEGRA_GMI=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
ARM: tegra: tegra_defconfig updates AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 07:15:14 +08:00
CONFIG_MTD_SPI_NOR=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_ICS932S401=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
ARM: tegra: tegra_defconfig updates AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 07:15:14 +08:00
CONFIG_EEPROM_AT24=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_BLK_DEV_SD=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_BLK_DEV_SR=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
# CONFIG_SCSI_LOWLEVEL is not set
ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig This adds ATA, SATA_AHCI and AHCI_TEGRA support to tegra_defconfig so that the SATA support will be automatically enabled. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-07-16 16:54:23 +08:00
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_AHCI_TEGRA=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_IGB=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_R8169=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_BRCMFMAC=m
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_RT2X00=y
CONFIG_RT2800USB=m
ARM: tegra: tegra_defconfig updates AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 07:15:14 +08:00
CONFIG_INPUT_JOYDEV=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_INPUT_EVDEV=y
ARM: tegra: defconfig updates Update tegra_defconfig to: * Enable CONFIG_ARCH_TEGRA_114_SOC. * Enable various PMIC and related options for Tegra114 platforms Dalmore and pluto: Palmas, TPS51362, TPS65090. * Enable KEYBOARD_GPIO, mainly as a suspend wakeup source. * Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various move/remove changes, and removing some entries for now-default or selected options. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 21:47:43 +08:00
CONFIG_KEYBOARD_GPIO=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_KEYBOARD_TEGRA=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_KEYBOARD_CROS_EC=y
ARM: tegra: defconfig updates Enable: * SYSVIPC (needed for some apps, e.g. fakeroot). * Elantech touchpad (touchpad on AC100). * SCSI_MULTI_LUN (needed for some USB SD card readers). * PCI, MSI, and Tegra's PCIe driver. * USB XHCI; useful for testing PCIe. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-24 00:03:01 +08:00
CONFIG_MOUSE_PS2_ELANTECH=y
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: tegra: enable Atmel touchpad in defconfig This driver is used on Venice2 for the touchpad. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-02 23:57:10 +08:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
ARM: tegra: Update default configuration Update the Tegra default configuration for the following features: - expose hardware/virtual IRQ mapping via debugfs - WM9712 audio/touch controller as found on Colibri T20 - sysfs interface for GPIOs - NFS client support for NFS version 4 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-29 05:08:15 +08:00
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9713 is not set
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_TOUCHSCREEN_STMPE=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_INPUT_MISC=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
# CONFIG_LEGACY_PTYS is not set
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: tegra: Update default configuration for v4.9-rc1 Regenerate the default configuration on top of v4.9-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08 18:45:34 +08:00
CONFIG_SERIAL_TEGRA=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
# CONFIG_HW_RANDOM is not set
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
# CONFIG_I2C_COMPAT is not set
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_I2C_CHARDEV=y
ARM: tegra: defconfig updates - ams AS3722 is used as system PMIC for Tegra124 based Venice2. - NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. - GSPCA to support the webcam on Venice2. - Allocate 64 MiB for CMA by default; the default 16MiB is not enough for the majority of use-cases. This can still be overridden by the cma command-line option. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-07 16:39:59 +08:00
CONFIG_I2C_MUX_PCA954x=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_I2C_MUX_PINCTRL=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_I2C_TEGRA=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SPI=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_SPI_TEGRA114=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_PINCTRL_AS3722=y
ARM: tegra: defconfig updates ARCH_TEGRA_124_SOC: Tegra124 SoC support. CPU_FREQ_STAT_DETAILS: Enables various sysfs files that are useful when testing cpufreq. CONFIG_COMMON_CLK_DEBUG: Useful to look at the clock tree to verify that clocks for the various devices have been properly set up. PINCTRL_PALMAS: Used on Dalmore board. NEON: Enables SIMD instruction support for Tegra30 and later SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-09-04 04:08:27 +08:00
CONFIG_PINCTRL_PALMAS=y
ARM: tegra: Update default configuration Update the Tegra default configuration for the following features: - expose hardware/virtual IRQ mapping via debugfs - WM9712 audio/touch controller as found on Colibri T20 - sysfs interface for GPIOs - NFS client support for NFS version 4 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-29 05:08:15 +08:00
CONFIG_GPIO_SYSFS=y
ARM: tegra: rebuild tegra_defconfig Run "make tegra_defconfig; make savedefconf" on v3.16-rc1. This allows other people to do the same thing to adjust the defconfig file without their patch bringing in a bunch of irrelevant diffs. All of the removed options either have been removed from Kconfig, or are now default y. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-17 01:48:13 +08:00
CONFIG_GPIO_PCA953X=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_GPIO_PCA953X_IRQ=y
ARM: tegra: defconfig updates Update tegra_defconfig to: * Enable CONFIG_ARCH_TEGRA_114_SOC. * Enable various PMIC and related options for Tegra114 platforms Dalmore and pluto: Palmas, TPS51362, TPS65090. * Enable KEYBOARD_GPIO, mainly as a suspend wakeup source. * Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various move/remove changes, and removing some entries for now-default or selected options. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 21:47:43 +08:00
CONFIG_GPIO_PALMAS=y
ARM: tegra: defconfig: Enable tps6586x gpio Enable GPIO_TPS6586X as the gpio functionality of this device moved as platform driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-25 06:39:31 +08:00
CONFIG_GPIO_TPS6586X=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_GPIO_TPS65910=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_POWER_RESET=y
ARM: tegra: defconfig updates - ams AS3722 is used as system PMIC for Tegra124 based Venice2. - NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. - GSPCA to support the webcam on Venice2. - Allocate 64 MiB for CMA by default; the default 16MiB is not enough for the majority of use-cases. This can still be overridden by the cma command-line option. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-07 16:39:59 +08:00
CONFIG_POWER_RESET_AS3722=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_POWER_RESET_GPIO=y
ARM: tegra: Update default configuration for v4.9-rc1 Regenerate the default configuration on top of v4.9-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08 18:45:34 +08:00
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_TPS65090=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_SENSORS_LM90=y
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_SENSORS_LM95245=y
ARM: tegra: Update default configuration Changes contributed by Marcel Ziswiler <marcel.ziswiler@toradex.com>: Enable HDA to support audio over HDMI and codecs connected to the HDA controller (needed by the Toradex Apalis Tegra30 Evaluation Board): - SND_HDA - SND_HDA_TEGRA - SND_HDA_INPUT_BEEP - SND_HDA_INPUT_JACK - SND_HDA_PATCH_LOADER - SND_HDA_CODEC_REALTEK - SND_HDA_CODEC_HDMI - SND_HDA_GENERIC Enable watchdog support: - WATCHDOG - TEGRA_WATCHDOG Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-05 20:20:16 +08:00
CONFIG_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_MFD_AS3722=y
CONFIG_MFD_CROS_EC=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_MFD_MAX8907=y
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_MFD_STMPE=y
ARM: tegra: defconfig updates Update tegra_defconfig to: * Enable CONFIG_ARCH_TEGRA_114_SOC. * Enable various PMIC and related options for Tegra114 platforms Dalmore and pluto: Palmas, TPS51362, TPS65090. * Enable KEYBOARD_GPIO, mainly as a suspend wakeup source. * Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various move/remove changes, and removing some entries for now-default or selected options. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 21:47:43 +08:00
CONFIG_MFD_PALMAS=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_REGULATOR=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_REGULATOR_AS3722=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_REGULATOR_GPIO=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_REGULATOR_MAX8907=y
ARM: tegra: defconfig updates Update tegra_defconfig to: * Enable CONFIG_ARCH_TEGRA_114_SOC. * Enable various PMIC and related options for Tegra114 platforms Dalmore and pluto: Palmas, TPS51362, TPS65090. * Enable KEYBOARD_GPIO, mainly as a suspend wakeup source. * Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various move/remove changes, and removing some entries for now-default or selected options. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 21:47:43 +08:00
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS51632=y
ARM: tegra: update defconfig New options enabled: * REGULATOR_TPS62360: for Cardhu's CPU core * MEMORY: dependency for TEGRA*_MC Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> # (parts) Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> # (parts) Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-11 04:38:44 +08:00
CONFIG_REGULATOR_TPS62360=y
ARM: tegra: defconfig updates Update tegra_defconfig to: * Enable CONFIG_ARCH_TEGRA_114_SOC. * Enable various PMIC and related options for Tegra114 platforms Dalmore and pluto: Palmas, TPS51362, TPS65090. * Enable KEYBOARD_GPIO, mainly as a suspend wakeup source. * Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various move/remove changes, and removing some entries for now-default or selected options. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 21:47:43 +08:00
CONFIG_REGULATOR_TPS65090=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_REGULATOR_TPS6586X=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_REGULATOR_TPS65910=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
ARM: tegra: defconfig updates - ams AS3722 is used as system PMIC for Tegra124 based Venice2. - NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. - GSPCA to support the webcam on Venice2. - Allocate 64 MiB for CMA by default; the default 16MiB is not enough for the majority of use-cases. This can still be overridden by the cma command-line option. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-07 16:39:59 +08:00
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_GSPCA=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_DRM=y
ARM: tegra: Update default configuration * CPU frequency scaling for Tegra124 * Nouveau (for GK20A GPU) support Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-13 22:58:51 +08:00
CONFIG_DRM_NOUVEAU=m
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_DRM_TEGRA=y
ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-25 11:13:28 +08:00
CONFIG_DRM_PANEL_SIMPLE=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
# CONFIG_LCD_CLASS_DEVICE is not set
ARM: tegra: Update default configuration for v5.1-rc1 Most of the changes here are just symbols that are now enabled by default, have been removed, or which have been moved around and now appear in a different spot. The only notable change here is that BACKLIGHT_CLASS_DEVICE is now built-in. This is to allow BACKLIGHT_PWM to be built-in as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 17:02:29 +08:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM: tegra: tegra_defconfig updates AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 07:15:14 +08:00
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_LOGO=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_DRIVERS is not set
ARM: tegra: Update default configuration Changes contributed by Marcel Ziswiler <marcel.ziswiler@toradex.com>: Enable HDA to support audio over HDMI and codecs connected to the HDA controller (needed by the Toradex Apalis Tegra30 Evaluation Board): - SND_HDA - SND_HDA_TEGRA - SND_HDA_INPUT_BEEP - SND_HDA_INPUT_JACK - SND_HDA_PATCH_LOADER - SND_HDA_CODEC_REALTEK - SND_HDA_CODEC_HDMI - SND_HDA_GENERIC Enable watchdog support: - WATCHDOG - TEGRA_WATCHDOG Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-05 20:20:16 +08:00
CONFIG_SND_HDA_TEGRA=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_HDMI=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
ARM: tegra: Add Tegra I2S interfaces to defconfig This selects both the Tegra20 and Tegra30 I2S interfaces (that were previously auto-selected by Kconfig but are not anymore) to tegra_defconfig, as built-ins. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-07-30 19:22:19 +08:00
CONFIG_SND_SOC_TEGRA20_I2S=y
CONFIG_SND_SOC_TEGRA30_I2S=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_SND_SOC_TEGRA_RT5640=y
ARM: tegra: defconfig updates Enable: * SND_SOC_TEGRA_WM8753 (new feature) * TPS65910 (Cardhu regulator) * CONFIG_I2C_MUX (dependency of:) * CONFIG_I2C_MUX_PINCTRL (for Seaboard) Remove some deleted options: * MACH_KAEN * MACH_VENTANA * MACH_WARIO Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-22 05:02:57 +08:00
CONFIG_SND_SOC_TEGRA_WM8753=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SND_SOC_TEGRA_WM8903=y
ARM: tegra: Update default configuration Update the Tegra default configuration for the following features: - expose hardware/virtual IRQ mapping via debugfs - WM9712 audio/touch controller as found on Colibri T20 - sysfs interface for GPIOs - NFS client support for NFS version 4 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-29 05:08:15 +08:00
CONFIG_SND_SOC_TEGRA_WM9712=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_SND_SOC_TEGRA_ALC5632=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_SND_SOC_TEGRA_MAX98090=y
ARM: tegra: Enable SGTL5000 audio The NVIDIA Tegra 3 aka T30 based Apalis T30 and Colibri T30 as well as the new Tegra K1 aka TK1 based Apalis TK1 modules contain a Freescale SGTL5000 analogue audio codec. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-19 09:00:02 +08:00
CONFIG_SND_SOC_TEGRA_SGTL5000=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB=y
ARM: tegra: defconfig updates Enable: * SYSVIPC (needed for some apps, e.g. fakeroot). * Elantech touchpad (touchpad on AC100). * SCSI_MULTI_LUN (needed for some USB SD card readers). * PCI, MSI, and Tegra's PCIe driver. * USB XHCI; useful for testing PCIe. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-24 00:03:01 +08:00
CONFIG_USB_XHCI_HCD=y
ARM: tegra: Enable XUSB controller in defconfig Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the Tegra default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-21 17:52:14 +08:00
CONFIG_USB_XHCI_TEGRA=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_USB_ACM=y
CONFIG_USB_WDM=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_USB_STORAGE=y
ARM: defconfig: tegra: Enable ChipIdea UDC driver Since NVIDIA Tegra is supported now by the ChipIdea USB driver, let's enable this driver in tegra_defconfig. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-16 18:32:41 +08:00
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_GADGET=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_MMC=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_MMC_BLOCK_MINORS=16
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_MMC_SDHCI_TEGRA=y
ARM: tegra: add LED options back into tegra_defconfig The last time tegra_defconfig was rebuilt, various LEDs options were somehow selected by other options, and hence their entries in tegra_defconfig were removed by "make savedefconfig". However, for some reason this is no longer happening, so we need to add the entries back into tegra_defconfig so the they are enabled in .config. Fixes: db079b1811d1 ("ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS)" Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-21 05:37:20 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_LEDS_GPIO=y
ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C buses and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> [swarren, dropped chunk contained in previous commit that rebuilt the defconfig file] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-10 06:52:45 +08:00
CONFIG_LEDS_PWM=y
ARM: tegra: add LED options back into tegra_defconfig The last time tegra_defconfig was rebuilt, various LEDs options were somehow selected by other options, and hence their entries in tegra_defconfig were removed by "make savedefconfig". However, for some reason this is no longer happening, so we need to add the entries back into tegra_defconfig so the they are enabled in .config. Fixes: db079b1811d1 ("ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS)" Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-21 05:37:20 +08:00
CONFIG_LEDS_TRIGGERS=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_LEDS_TRIGGER_GPIO=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_RTC_CLASS=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_RTC_DRV_AS3722=y
ARM: tegra: tegra_defconfig updates AT24C EEPROM: This is used for the board ID EEPROM on Jetson TK1, as well as likely a whole slew of other NVIDIA reference boards; we simply haven't added enabled the EEPROM in the DT files until now. MTD_SPI_NOR: This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. FRAMEBUFFER_CONSOLE_ROTATION: Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot console in the expected orientation. CAN*, RTC_DRV_DS1307: Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on this carrier board. Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two MCP251x CAN controllers. INPUT_JOYDEV: NVIDIA SHIELD embeds a USB joystick device. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-03-20 07:15:14 +08:00
CONFIG_RTC_DRV_DS1307=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_RTC_DRV_MAX8907=y
ARM: tegra: defconfig updates Update tegra_defconfig to: * Enable CONFIG_ARCH_TEGRA_114_SOC. * Enable various PMIC and related options for Tegra114 platforms Dalmore and pluto: Palmas, TPS51362, TPS65090. * Enable KEYBOARD_GPIO, mainly as a suspend wakeup source. * Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various move/remove changes, and removing some entries for now-default or selected options. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-21 21:47:43 +08:00
CONFIG_RTC_DRV_PALMAS=y
ARM: tegra: defconfig updates Add: * RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony and Ventana. * POWER_RESET_GPIO to provide a power off driver for TrimSlice. * Tegra KBC controller support, for Seaboard. * Tegra high-speed UART driver, for Cardhu Bluetooth. * kexec support. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-22 18:53:05 +08:00
CONFIG_RTC_DRV_TPS6586X=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_RTC_DRV_TPS65910=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_RTC_DRV_EM3027=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: RTC, SPI, USB and USB_STORAGE together with corresponding tegra drivers. Also enable some of the common usb ethernet adapters. Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice, and WM8903-based platforms such as Harmony and Seaboard. Finally, enable new merged boards (Ventana) and the generic devicetree board. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 01:56:59 +08:00
CONFIG_RTC_DRV_TEGRA=y
ARM: tegra: config: enable dmaengine based APB DMA driver Enable config for dmaengine based Tegra APB DMA driver and disable the legacy APB DMA driver (SYSTEM_DMA). [swarren: removed CONFIG_TEGRA_SYSTEM_DMA not set line, since the option is removed entirely in a later patch] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 12:13:13 +08:00
CONFIG_DMADEVICES=y
CONFIG_TEGRA20_APB_DMA=y
ARM: tegra: enable new drivers in defconfig Enable new platforms and tegra drivers in tegra_defconfig. Also enable some of the common devices several platforms, and GUID partition tables to make it possible to boot a tegra_defconfig kernel with a ChromiumOS filesystem. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-05 08:11:43 +08:00
CONFIG_STAGING=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-06 08:03:53 +08:00
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
ARM: tegra: Update default configuration for v4.9-rc1 Regenerate the default configuration on top of v4.9-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08 18:45:34 +08:00
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
ARM: tegra: update defconfig New options enabled: * REGULATOR_TPS62360: for Cardhu's CPU core * MEMORY: dependency for TEGRA*_MC Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> # (parts) Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> # (parts) Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-11 04:38:44 +08:00
CONFIG_MEMORY=y
ARM: tegra: update defconfig New options enabled: * RUNTIME_PM * ISL29028 (light and proximity) * INPUT_MPU3050 (gyro) * BATTERY_SBS * EM3027 RTC * INPUT_MISC (dependency) * POWER_SUPPLY (dependency) The IIO option seems to have been moved recently too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-12 00:37:02 +08:00
CONFIG_IIO=y
ARM: defconfig: tegra: switch to MPU3050 IIO driver The Tegra is currently configured to use the old input driver for the MPU-3050. Switch to the new IIO driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-27 20:05:29 +08:00
CONFIG_MPU3050_I2C=y
ARM: tegra: Update default configuration for v4.13-rc1 Regenerate the default configuration on top of v4.13-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17 22:26:14 +08:00
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
ARM: tegra: defconfig updates Enable some new features: * The Tegra114 SPI controller, for Dalmore's SPI flash. * Set all the GPIO leds triggers to their "if you don't know, say X" value, so there are some useful triggers for the gpio-leds support. * TPS65090 charger, for Dalmore. * ASoC RT5640 machine driver, for audio on Beaver and Dalmore. Also, rebuild tegra_defconfig on top of linux-next. This should make it easier to create future defconfig patches, without extraneous diffs. This should introduce no changes; simply moving entries around due to Kconfig ordering changes. The apparent exceptions are: * AUTO_ZRELADDR: Selected by ARM multi-platform support. * MTD_CHAR: Removed in Kconfig. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren, squashed various patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-10 09:48:02 +08:00
CONFIG_AK8975=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_PWM=y
CONFIG_PWM_TEGRA=y
ARM: tegra: Enable XUSB controller in defconfig Enable the XUSB pad controller and XUSB controller (implementing an XHCI interface) in the Tegra default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-21 17:52:14 +08:00
CONFIG_PHY_TEGRA_XUSB=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
ARM: tegra: defconfig updates Removed: * MACH_HARMONY * MACH_PAZ00 * MACH_TRIMSLICE These used to enable board support for individual boards. Now that we only support device tree, these options have been removed. Added: * TEGRA_PCI This used to be selected by the board options above. Select this explicitly now that the board options have been removed. * TEGRA_DEBUG_UART_AUTO_ODMDATA This makes the kernel automatically pick a UART for earlyprintk. It's likely to be a useful option for everyone. * PWM * PWM_TEGRA Enable the new PWM subsystem, and the Tegra driver within it. * GPIO_PCA953X * GPIO_PCA953X_IRQ * MFD_MAX8907 * REGULATOR_MAX8907 * RTC_DRV_MAX8907 * RTC_DRV_TPS65910 Various drivers required for the Whistler board. * RTC_INTF_SYSFS * RTC_INTF_PROC * RTC_INTF_DEV Some RTC options that Kconfig help implies should typically be enabled. * Wifi chip (rt3070) * Bluetooth (btusb) * Camera (uvcvideo) * 3G modem (acm and wdm) * rfkill * GPIO LEDs * NVEC Various devices and features found on PAZ00 boards. Some of these are enabled as modules because they are not needed for boot and will not be used on other boards. Wifi also needs to be module because of the firmware loader. The update also enabled support for the rfkill switch, the Wifi LED and the nvec power and led driver which got lost in the past. * DEVTMPFS, TMPFS_POSIX_ACL These are mandatory on modern linux distros. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-16 01:08:58 +08:00
CONFIG_TMPFS_POSIX_ACL=y
ARM: tegra: defconfig updates New options enabled: * BRCMFMAC: wlan driver, enable as module. * MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH to enable serial flash on Cardhu and TrimSlice. * PWM/backlight features for use with tegradrm. * tegradrm; Tegra's new display driver. * CMA, so that tegradrm can allocate large buffers. * SquashFS, which is used as the root filesystem on boards based on the Tamonten processor module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 16:55:00 +08:00
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_NFS_FS=y
ARM: tegra: Update default configuration Update the Tegra default configuration for the following features: - expose hardware/virtual IRQ mapping via debugfs - WM9712 audio/touch controller as found on Colibri T20 - sysfs interface for GPIOs - NFS client support for NFS version 4 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-29 05:08:15 +08:00
CONFIG_NFS_V4=y
ARM: tegra: update defconfig * Enable TPS6586x PMIC driver * Enable RealTek 8169 used on TrimSlice * Allow booting with root on NFS Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-09 22:31:19 +08:00
CONFIG_ROOT_NFS=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: tegra: Update default configuration for v5.1-rc1 Most of the changes here are just symbols that are now enabled by default, have been removed, or which have been moved around and now appear in a different spot. The only notable change here is that BACKLIGHT_CLASS_DEVICE is now built-in. This is to allow BACKLIGHT_PWM to be built-in as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 17:02:29 +08:00
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRC_CCITT=y
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_PRINTK_TIME=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_DEBUG_INFO=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_MAGIC_SYSRQ=y
ARM: tegra: tegra_defconfig updates Add some features to tegra_defconfig: * Tegra+MAX98090 audio machine driver, as used on the Venice2 board. * AMX3722 PMIC, as used on the Venice2 board. * ChromeOS embedded controller, for the Venice2 keyboard. Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to minimize irrelevant diffs showing up when people edit the file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 05:17:14 +08:00
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_VM=y
ARM: tegra: add tegra_defconfig Adding one single defconfig for the tegra family of boards, to over time cover the superset of supported platform and drivers. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@android.com>
2011-01-06 04:03:12 +08:00
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y