linux/drivers/gpu/drm/exynos/exynos_mixer.c

1328 lines
33 KiB
C
Raw Normal View History

drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
/*
* Copyright (C) 2011 Samsung Electronics Co.Ltd
* Authors:
* Seung-Woo Kim <sw0312.kim@samsung.com>
* Inki Dae <inki.dae@samsung.com>
* Joonyoung Shim <jy0922.shim@samsung.com>
*
* Based on drivers/media/video/s5p-tv/mixer_reg.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <drm/drmP.h>
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
#include "regs-mixer.h"
#include "regs-vp.h"
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <drm/exynos_drm.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
#include "exynos_drm_hdmi.h"
#include "exynos_drm_iommu.h"
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
#define get_mixer_context(dev) platform_get_drvdata(to_platform_device(dev))
struct hdmi_win_data {
dma_addr_t dma_addr;
dma_addr_t chroma_dma_addr;
uint32_t pixel_format;
unsigned int bpp;
unsigned int crtc_x;
unsigned int crtc_y;
unsigned int crtc_width;
unsigned int crtc_height;
unsigned int fb_x;
unsigned int fb_y;
unsigned int fb_width;
unsigned int fb_height;
unsigned int src_width;
unsigned int src_height;
unsigned int mode_width;
unsigned int mode_height;
unsigned int scan_flags;
bool enabled;
bool resume;
};
struct mixer_resources {
int irq;
void __iomem *mixer_regs;
void __iomem *vp_regs;
spinlock_t reg_slock;
struct clk *mixer;
struct clk *vp;
struct clk *sclk_mixer;
struct clk *sclk_hdmi;
struct clk *sclk_dac;
};
enum mixer_version_id {
MXR_VER_0_0_0_16,
MXR_VER_16_0_33_0,
};
struct mixer_context {
struct device *dev;
struct drm_device *drm_dev;
int pipe;
bool interlace;
bool powered;
bool vp_enabled;
u32 int_en;
struct mutex mixer_mutex;
struct mixer_resources mixer_res;
struct hdmi_win_data win_data[MIXER_WIN_NR];
enum mixer_version_id mxr_ver;
void *parent_ctx;
wait_queue_head_t wait_vsync_queue;
atomic_t wait_vsync_event;
};
struct mixer_drv_data {
enum mixer_version_id version;
bool is_vp_enabled;
};
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
static const u8 filter_y_horiz_tap8[] = {
0, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, 0, 0, 0,
0, 2, 4, 5, 6, 6, 6, 6,
6, 5, 5, 4, 3, 2, 1, 1,
0, -6, -12, -16, -18, -20, -21, -20,
-20, -18, -16, -13, -10, -8, -5, -2,
127, 126, 125, 121, 114, 107, 99, 89,
79, 68, 57, 46, 35, 25, 16, 8,
};
static const u8 filter_y_vert_tap4[] = {
0, -3, -6, -8, -8, -8, -8, -7,
-6, -5, -4, -3, -2, -1, -1, 0,
127, 126, 124, 118, 111, 102, 92, 81,
70, 59, 48, 37, 27, 19, 11, 5,
0, 5, 11, 19, 27, 37, 48, 59,
70, 81, 92, 102, 111, 118, 124, 126,
0, 0, -1, -1, -2, -3, -4, -5,
-6, -7, -8, -8, -8, -8, -6, -3,
};
static const u8 filter_cr_horiz_tap4[] = {
0, -3, -6, -8, -8, -8, -8, -7,
-6, -5, -4, -3, -2, -1, -1, 0,
127, 126, 124, 118, 111, 102, 92, 81,
70, 59, 48, 37, 27, 19, 11, 5,
};
static inline u32 vp_reg_read(struct mixer_resources *res, u32 reg_id)
{
return readl(res->vp_regs + reg_id);
}
static inline void vp_reg_write(struct mixer_resources *res, u32 reg_id,
u32 val)
{
writel(val, res->vp_regs + reg_id);
}
static inline void vp_reg_writemask(struct mixer_resources *res, u32 reg_id,
u32 val, u32 mask)
{
u32 old = vp_reg_read(res, reg_id);
val = (val & mask) | (old & ~mask);
writel(val, res->vp_regs + reg_id);
}
static inline u32 mixer_reg_read(struct mixer_resources *res, u32 reg_id)
{
return readl(res->mixer_regs + reg_id);
}
static inline void mixer_reg_write(struct mixer_resources *res, u32 reg_id,
u32 val)
{
writel(val, res->mixer_regs + reg_id);
}
static inline void mixer_reg_writemask(struct mixer_resources *res,
u32 reg_id, u32 val, u32 mask)
{
u32 old = mixer_reg_read(res, reg_id);
val = (val & mask) | (old & ~mask);
writel(val, res->mixer_regs + reg_id);
}
static void mixer_regs_dump(struct mixer_context *ctx)
{
#define DUMPREG(reg_id) \
do { \
DRM_DEBUG_KMS(#reg_id " = %08x\n", \
(u32)readl(ctx->mixer_res.mixer_regs + reg_id)); \
} while (0)
DUMPREG(MXR_STATUS);
DUMPREG(MXR_CFG);
DUMPREG(MXR_INT_EN);
DUMPREG(MXR_INT_STATUS);
DUMPREG(MXR_LAYER_CFG);
DUMPREG(MXR_VIDEO_CFG);
DUMPREG(MXR_GRAPHIC0_CFG);
DUMPREG(MXR_GRAPHIC0_BASE);
DUMPREG(MXR_GRAPHIC0_SPAN);
DUMPREG(MXR_GRAPHIC0_WH);
DUMPREG(MXR_GRAPHIC0_SXY);
DUMPREG(MXR_GRAPHIC0_DXY);
DUMPREG(MXR_GRAPHIC1_CFG);
DUMPREG(MXR_GRAPHIC1_BASE);
DUMPREG(MXR_GRAPHIC1_SPAN);
DUMPREG(MXR_GRAPHIC1_WH);
DUMPREG(MXR_GRAPHIC1_SXY);
DUMPREG(MXR_GRAPHIC1_DXY);
#undef DUMPREG
}
static void vp_regs_dump(struct mixer_context *ctx)
{
#define DUMPREG(reg_id) \
do { \
DRM_DEBUG_KMS(#reg_id " = %08x\n", \
(u32) readl(ctx->mixer_res.vp_regs + reg_id)); \
} while (0)
DUMPREG(VP_ENABLE);
DUMPREG(VP_SRESET);
DUMPREG(VP_SHADOW_UPDATE);
DUMPREG(VP_FIELD_ID);
DUMPREG(VP_MODE);
DUMPREG(VP_IMG_SIZE_Y);
DUMPREG(VP_IMG_SIZE_C);
DUMPREG(VP_PER_RATE_CTRL);
DUMPREG(VP_TOP_Y_PTR);
DUMPREG(VP_BOT_Y_PTR);
DUMPREG(VP_TOP_C_PTR);
DUMPREG(VP_BOT_C_PTR);
DUMPREG(VP_ENDIAN_MODE);
DUMPREG(VP_SRC_H_POSITION);
DUMPREG(VP_SRC_V_POSITION);
DUMPREG(VP_SRC_WIDTH);
DUMPREG(VP_SRC_HEIGHT);
DUMPREG(VP_DST_H_POSITION);
DUMPREG(VP_DST_V_POSITION);
DUMPREG(VP_DST_WIDTH);
DUMPREG(VP_DST_HEIGHT);
DUMPREG(VP_H_RATIO);
DUMPREG(VP_V_RATIO);
#undef DUMPREG
}
static inline void vp_filter_set(struct mixer_resources *res,
int reg_id, const u8 *data, unsigned int size)
{
/* assure 4-byte align */
BUG_ON(size & 3);
for (; size; size -= 4, reg_id += 4, data += 4) {
u32 val = (data[0] << 24) | (data[1] << 16) |
(data[2] << 8) | data[3];
vp_reg_write(res, reg_id, val);
}
}
static void vp_default_filter(struct mixer_resources *res)
{
vp_filter_set(res, VP_POLY8_Y0_LL,
filter_y_horiz_tap8, sizeof(filter_y_horiz_tap8));
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
vp_filter_set(res, VP_POLY4_Y0_LL,
filter_y_vert_tap4, sizeof(filter_y_vert_tap4));
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
vp_filter_set(res, VP_POLY4_C0_LL,
filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4));
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
static void mixer_vsync_set_update(struct mixer_context *ctx, bool enable)
{
struct mixer_resources *res = &ctx->mixer_res;
/* block update on vsync */
mixer_reg_writemask(res, MXR_STATUS, enable ?
MXR_STATUS_SYNC_ENABLE : 0, MXR_STATUS_SYNC_ENABLE);
if (ctx->vp_enabled)
vp_reg_write(res, VP_SHADOW_UPDATE, enable ?
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
VP_SHADOW_UPDATE_ENABLE : 0);
}
static void mixer_cfg_scan(struct mixer_context *ctx, unsigned int height)
{
struct mixer_resources *res = &ctx->mixer_res;
u32 val;
/* choosing between interlace and progressive mode */
val = (ctx->interlace ? MXR_CFG_SCAN_INTERLACE :
MXR_CFG_SCAN_PROGRASSIVE);
/* choosing between porper HD and SD mode */
if (height == 480)
val |= MXR_CFG_SCAN_NTSC | MXR_CFG_SCAN_SD;
else if (height == 576)
val |= MXR_CFG_SCAN_PAL | MXR_CFG_SCAN_SD;
else if (height == 720)
val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
else if (height == 1080)
val |= MXR_CFG_SCAN_HD_1080 | MXR_CFG_SCAN_HD;
else
val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_SCAN_MASK);
}
static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height)
{
struct mixer_resources *res = &ctx->mixer_res;
u32 val;
if (height == 480) {
val = MXR_CFG_RGB601_0_255;
} else if (height == 576) {
val = MXR_CFG_RGB601_0_255;
} else if (height == 720) {
val = MXR_CFG_RGB709_16_235;
mixer_reg_write(res, MXR_CM_COEFF_Y,
(1 << 30) | (94 << 20) | (314 << 10) |
(32 << 0));
mixer_reg_write(res, MXR_CM_COEFF_CB,
(972 << 20) | (851 << 10) | (225 << 0));
mixer_reg_write(res, MXR_CM_COEFF_CR,
(225 << 20) | (820 << 10) | (1004 << 0));
} else if (height == 1080) {
val = MXR_CFG_RGB709_16_235;
mixer_reg_write(res, MXR_CM_COEFF_Y,
(1 << 30) | (94 << 20) | (314 << 10) |
(32 << 0));
mixer_reg_write(res, MXR_CM_COEFF_CB,
(972 << 20) | (851 << 10) | (225 << 0));
mixer_reg_write(res, MXR_CM_COEFF_CR,
(225 << 20) | (820 << 10) | (1004 << 0));
} else {
val = MXR_CFG_RGB709_16_235;
mixer_reg_write(res, MXR_CM_COEFF_Y,
(1 << 30) | (94 << 20) | (314 << 10) |
(32 << 0));
mixer_reg_write(res, MXR_CM_COEFF_CB,
(972 << 20) | (851 << 10) | (225 << 0));
mixer_reg_write(res, MXR_CM_COEFF_CR,
(225 << 20) | (820 << 10) | (1004 << 0));
}
mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_RGB_FMT_MASK);
}
static void mixer_cfg_layer(struct mixer_context *ctx, int win, bool enable)
{
struct mixer_resources *res = &ctx->mixer_res;
u32 val = enable ? ~0 : 0;
switch (win) {
case 0:
mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_GRP0_ENABLE);
break;
case 1:
mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_GRP1_ENABLE);
break;
case 2:
if (ctx->vp_enabled) {
vp_reg_writemask(res, VP_ENABLE, val, VP_ENABLE_ON);
mixer_reg_writemask(res, MXR_CFG, val,
MXR_CFG_VP_ENABLE);
}
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
break;
}
}
static void mixer_run(struct mixer_context *ctx)
{
struct mixer_resources *res = &ctx->mixer_res;
mixer_reg_writemask(res, MXR_STATUS, ~0, MXR_STATUS_REG_RUN);
mixer_regs_dump(ctx);
}
static void vp_video_buffer(struct mixer_context *ctx, int win)
{
struct mixer_resources *res = &ctx->mixer_res;
unsigned long flags;
struct hdmi_win_data *win_data;
unsigned int x_ratio, y_ratio;
unsigned int buf_num;
dma_addr_t luma_addr[2], chroma_addr[2];
bool tiled_mode = false;
bool crcb_mode = false;
u32 val;
win_data = &ctx->win_data[win];
switch (win_data->pixel_format) {
case DRM_FORMAT_NV12MT:
tiled_mode = true;
case DRM_FORMAT_NV12:
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
crcb_mode = false;
buf_num = 2;
break;
/* TODO: single buffer format NV12, NV21 */
default:
/* ignore pixel format at disable time */
if (!win_data->dma_addr)
break;
DRM_ERROR("pixel format for vp is wrong [%d].\n",
win_data->pixel_format);
return;
}
/* scaling feature: (src << 16) / dst */
x_ratio = (win_data->src_width << 16) / win_data->crtc_width;
y_ratio = (win_data->src_height << 16) / win_data->crtc_height;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (buf_num == 2) {
luma_addr[0] = win_data->dma_addr;
chroma_addr[0] = win_data->chroma_dma_addr;
} else {
luma_addr[0] = win_data->dma_addr;
chroma_addr[0] = win_data->dma_addr
+ (win_data->fb_width * win_data->fb_height);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
if (win_data->scan_flags & DRM_MODE_FLAG_INTERLACE) {
ctx->interlace = true;
if (tiled_mode) {
luma_addr[1] = luma_addr[0] + 0x40;
chroma_addr[1] = chroma_addr[0] + 0x40;
} else {
luma_addr[1] = luma_addr[0] + win_data->fb_width;
chroma_addr[1] = chroma_addr[0] + win_data->fb_width;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
} else {
ctx->interlace = false;
luma_addr[1] = 0;
chroma_addr[1] = 0;
}
spin_lock_irqsave(&res->reg_slock, flags);
mixer_vsync_set_update(ctx, false);
/* interlace or progressive scan mode */
val = (ctx->interlace ? ~0 : 0);
vp_reg_writemask(res, VP_MODE, val, VP_MODE_LINE_SKIP);
/* setup format */
val = (crcb_mode ? VP_MODE_NV21 : VP_MODE_NV12);
val |= (tiled_mode ? VP_MODE_MEM_TILED : VP_MODE_MEM_LINEAR);
vp_reg_writemask(res, VP_MODE, val, VP_MODE_FMT_MASK);
/* setting size of input image */
vp_reg_write(res, VP_IMG_SIZE_Y, VP_IMG_HSIZE(win_data->fb_width) |
VP_IMG_VSIZE(win_data->fb_height));
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
/* chroma height has to reduced by 2 to avoid chroma distorions */
vp_reg_write(res, VP_IMG_SIZE_C, VP_IMG_HSIZE(win_data->fb_width) |
VP_IMG_VSIZE(win_data->fb_height / 2));
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
vp_reg_write(res, VP_SRC_WIDTH, win_data->src_width);
vp_reg_write(res, VP_SRC_HEIGHT, win_data->src_height);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
vp_reg_write(res, VP_SRC_H_POSITION,
VP_SRC_H_POSITION_VAL(win_data->fb_x));
vp_reg_write(res, VP_SRC_V_POSITION, win_data->fb_y);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
vp_reg_write(res, VP_DST_WIDTH, win_data->crtc_width);
vp_reg_write(res, VP_DST_H_POSITION, win_data->crtc_x);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (ctx->interlace) {
vp_reg_write(res, VP_DST_HEIGHT, win_data->crtc_height / 2);
vp_reg_write(res, VP_DST_V_POSITION, win_data->crtc_y / 2);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
} else {
vp_reg_write(res, VP_DST_HEIGHT, win_data->crtc_height);
vp_reg_write(res, VP_DST_V_POSITION, win_data->crtc_y);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
vp_reg_write(res, VP_H_RATIO, x_ratio);
vp_reg_write(res, VP_V_RATIO, y_ratio);
vp_reg_write(res, VP_ENDIAN_MODE, VP_ENDIAN_MODE_LITTLE);
/* set buffer address to vp */
vp_reg_write(res, VP_TOP_Y_PTR, luma_addr[0]);
vp_reg_write(res, VP_BOT_Y_PTR, luma_addr[1]);
vp_reg_write(res, VP_TOP_C_PTR, chroma_addr[0]);
vp_reg_write(res, VP_BOT_C_PTR, chroma_addr[1]);
mixer_cfg_scan(ctx, win_data->mode_height);
mixer_cfg_rgb_fmt(ctx, win_data->mode_height);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
mixer_cfg_layer(ctx, win, true);
mixer_run(ctx);
mixer_vsync_set_update(ctx, true);
spin_unlock_irqrestore(&res->reg_slock, flags);
vp_regs_dump(ctx);
}
static void mixer_layer_update(struct mixer_context *ctx)
{
struct mixer_resources *res = &ctx->mixer_res;
u32 val;
val = mixer_reg_read(res, MXR_CFG);
/* allow one update per vsync only */
if (!(val & MXR_CFG_LAYER_UPDATE_COUNT_MASK))
mixer_reg_writemask(res, MXR_CFG, ~0, MXR_CFG_LAYER_UPDATE);
}
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
static void mixer_graph_buffer(struct mixer_context *ctx, int win)
{
struct mixer_resources *res = &ctx->mixer_res;
unsigned long flags;
struct hdmi_win_data *win_data;
unsigned int x_ratio, y_ratio;
unsigned int src_x_offset, src_y_offset, dst_x_offset, dst_y_offset;
dma_addr_t dma_addr;
unsigned int fmt;
u32 val;
win_data = &ctx->win_data[win];
#define RGB565 4
#define ARGB1555 5
#define ARGB4444 6
#define ARGB8888 7
switch (win_data->bpp) {
case 16:
fmt = ARGB4444;
break;
case 32:
fmt = ARGB8888;
break;
default:
fmt = ARGB8888;
}
/* 2x scaling feature */
x_ratio = 0;
y_ratio = 0;
dst_x_offset = win_data->crtc_x;
dst_y_offset = win_data->crtc_y;
/* converting dma address base and source offset */
dma_addr = win_data->dma_addr
+ (win_data->fb_x * win_data->bpp >> 3)
+ (win_data->fb_y * win_data->fb_width * win_data->bpp >> 3);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
src_x_offset = 0;
src_y_offset = 0;
if (win_data->scan_flags & DRM_MODE_FLAG_INTERLACE)
ctx->interlace = true;
else
ctx->interlace = false;
spin_lock_irqsave(&res->reg_slock, flags);
mixer_vsync_set_update(ctx, false);
/* setup format */
mixer_reg_writemask(res, MXR_GRAPHIC_CFG(win),
MXR_GRP_CFG_FORMAT_VAL(fmt), MXR_GRP_CFG_FORMAT_MASK);
/* setup geometry */
mixer_reg_write(res, MXR_GRAPHIC_SPAN(win), win_data->fb_width);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
val = MXR_GRP_WH_WIDTH(win_data->crtc_width);
val |= MXR_GRP_WH_HEIGHT(win_data->crtc_height);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
val |= MXR_GRP_WH_H_SCALE(x_ratio);
val |= MXR_GRP_WH_V_SCALE(y_ratio);
mixer_reg_write(res, MXR_GRAPHIC_WH(win), val);
/* setup offsets in source image */
val = MXR_GRP_SXY_SX(src_x_offset);
val |= MXR_GRP_SXY_SY(src_y_offset);
mixer_reg_write(res, MXR_GRAPHIC_SXY(win), val);
/* setup offsets in display image */
val = MXR_GRP_DXY_DX(dst_x_offset);
val |= MXR_GRP_DXY_DY(dst_y_offset);
mixer_reg_write(res, MXR_GRAPHIC_DXY(win), val);
/* set buffer address to mixer */
mixer_reg_write(res, MXR_GRAPHIC_BASE(win), dma_addr);
mixer_cfg_scan(ctx, win_data->mode_height);
mixer_cfg_rgb_fmt(ctx, win_data->mode_height);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
mixer_cfg_layer(ctx, win, true);
/* layer update mandatory for mixer 16.0.33.0 */
if (ctx->mxr_ver == MXR_VER_16_0_33_0)
mixer_layer_update(ctx);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
mixer_run(ctx);
mixer_vsync_set_update(ctx, true);
spin_unlock_irqrestore(&res->reg_slock, flags);
}
static void vp_win_reset(struct mixer_context *ctx)
{
struct mixer_resources *res = &ctx->mixer_res;
int tries = 100;
vp_reg_write(res, VP_SRESET, VP_SRESET_PROCESSING);
for (tries = 100; tries; --tries) {
/* waiting until VP_SRESET_PROCESSING is 0 */
if (~vp_reg_read(res, VP_SRESET) & VP_SRESET_PROCESSING)
break;
usleep_range(10000, 12000);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
WARN(tries == 0, "failed to reset Video Processor\n");
}
static void mixer_win_reset(struct mixer_context *ctx)
{
struct mixer_resources *res = &ctx->mixer_res;
unsigned long flags;
u32 val; /* value stored to register */
spin_lock_irqsave(&res->reg_slock, flags);
mixer_vsync_set_update(ctx, false);
mixer_reg_writemask(res, MXR_CFG, MXR_CFG_DST_HDMI, MXR_CFG_DST_MASK);
/* set output in RGB888 mode */
mixer_reg_writemask(res, MXR_CFG, MXR_CFG_OUT_RGB888, MXR_CFG_OUT_MASK);
/* 16 beat burst in DMA */
mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST,
MXR_STATUS_BURST_MASK);
/* setting default layer priority: layer1 > layer0 > video
* because typical usage scenario would be
* layer1 - OSD
* layer0 - framebuffer
* video - video overlay
*/
val = MXR_LAYER_CFG_GRP1_VAL(3);
val |= MXR_LAYER_CFG_GRP0_VAL(2);
if (ctx->vp_enabled)
val |= MXR_LAYER_CFG_VP_VAL(1);
mixer_reg_write(res, MXR_LAYER_CFG, val);
/* setting background color */
mixer_reg_write(res, MXR_BG_COLOR0, 0x008080);
mixer_reg_write(res, MXR_BG_COLOR1, 0x008080);
mixer_reg_write(res, MXR_BG_COLOR2, 0x008080);
/* setting graphical layers */
val = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */
val |= MXR_GRP_CFG_WIN_BLEND_EN;
val |= MXR_GRP_CFG_BLEND_PRE_MUL;
val |= MXR_GRP_CFG_PIXEL_BLEND_EN;
val |= MXR_GRP_CFG_ALPHA_VAL(0xff); /* non-transparent alpha */
/* the same configuration for both layers */
mixer_reg_write(res, MXR_GRAPHIC_CFG(0), val);
mixer_reg_write(res, MXR_GRAPHIC_CFG(1), val);
/* setting video layers */
val = MXR_GRP_CFG_ALPHA_VAL(0);
mixer_reg_write(res, MXR_VIDEO_CFG, val);
if (ctx->vp_enabled) {
/* configuration of Video Processor Registers */
vp_win_reset(ctx);
vp_default_filter(res);
}
/* disable all layers */
mixer_reg_writemask(res, MXR_CFG, 0, MXR_CFG_GRP0_ENABLE);
mixer_reg_writemask(res, MXR_CFG, 0, MXR_CFG_GRP1_ENABLE);
if (ctx->vp_enabled)
mixer_reg_writemask(res, MXR_CFG, 0, MXR_CFG_VP_ENABLE);
mixer_vsync_set_update(ctx, true);
spin_unlock_irqrestore(&res->reg_slock, flags);
}
static int mixer_iommu_on(void *ctx, bool enable)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx;
struct mixer_context *mdata = ctx;
struct drm_device *drm_dev;
drm_hdmi_ctx = mdata->parent_ctx;
drm_dev = drm_hdmi_ctx->drm_dev;
if (is_drm_iommu_supported(drm_dev)) {
if (enable)
return drm_iommu_attach_device(drm_dev, mdata->dev);
drm_iommu_detach_device(drm_dev, mdata->dev);
}
return 0;
}
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
static int mixer_enable_vblank(void *ctx, int pipe)
{
struct mixer_context *mixer_ctx = ctx;
struct mixer_resources *res = &mixer_ctx->mixer_res;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
mixer_ctx->pipe = pipe;
/* enable vsync interrupt */
mixer_reg_writemask(res, MXR_INT_EN, MXR_INT_EN_VSYNC,
MXR_INT_EN_VSYNC);
return 0;
}
static void mixer_disable_vblank(void *ctx)
{
struct mixer_context *mixer_ctx = ctx;
struct mixer_resources *res = &mixer_ctx->mixer_res;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
/* disable vsync interrupt */
mixer_reg_writemask(res, MXR_INT_EN, 0, MXR_INT_EN_VSYNC);
}
static void mixer_win_mode_set(void *ctx,
struct exynos_drm_overlay *overlay)
{
struct mixer_context *mixer_ctx = ctx;
struct hdmi_win_data *win_data;
int win;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
if (!overlay) {
DRM_ERROR("overlay is NULL\n");
return;
}
DRM_DEBUG_KMS("set [%d]x[%d] at (%d,%d) to [%d]x[%d] at (%d,%d)\n",
overlay->fb_width, overlay->fb_height,
overlay->fb_x, overlay->fb_y,
overlay->crtc_width, overlay->crtc_height,
overlay->crtc_x, overlay->crtc_y);
win = overlay->zpos;
if (win == DEFAULT_ZPOS)
win = MIXER_DEFAULT_WIN;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (win < 0 || win > MIXER_WIN_NR) {
DRM_ERROR("mixer window[%d] is wrong\n", win);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
return;
}
win_data = &mixer_ctx->win_data[win];
win_data->dma_addr = overlay->dma_addr[0];
win_data->chroma_dma_addr = overlay->dma_addr[1];
win_data->pixel_format = overlay->pixel_format;
win_data->bpp = overlay->bpp;
win_data->crtc_x = overlay->crtc_x;
win_data->crtc_y = overlay->crtc_y;
win_data->crtc_width = overlay->crtc_width;
win_data->crtc_height = overlay->crtc_height;
win_data->fb_x = overlay->fb_x;
win_data->fb_y = overlay->fb_y;
win_data->fb_width = overlay->fb_width;
win_data->fb_height = overlay->fb_height;
win_data->src_width = overlay->src_width;
win_data->src_height = overlay->src_height;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
win_data->mode_width = overlay->mode_width;
win_data->mode_height = overlay->mode_height;
win_data->scan_flags = overlay->scan_flag;
}
static void mixer_win_commit(void *ctx, int win)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
{
struct mixer_context *mixer_ctx = ctx;
DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win);
mutex_lock(&mixer_ctx->mixer_mutex);
if (!mixer_ctx->powered) {
mutex_unlock(&mixer_ctx->mixer_mutex);
return;
}
mutex_unlock(&mixer_ctx->mixer_mutex);
if (win > 1 && mixer_ctx->vp_enabled)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
vp_video_buffer(mixer_ctx, win);
else
mixer_graph_buffer(mixer_ctx, win);
mixer_ctx->win_data[win].enabled = true;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
static void mixer_win_disable(void *ctx, int win)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
{
struct mixer_context *mixer_ctx = ctx;
struct mixer_resources *res = &mixer_ctx->mixer_res;
unsigned long flags;
DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win);
mutex_lock(&mixer_ctx->mixer_mutex);
if (!mixer_ctx->powered) {
mutex_unlock(&mixer_ctx->mixer_mutex);
mixer_ctx->win_data[win].resume = false;
return;
}
mutex_unlock(&mixer_ctx->mixer_mutex);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
spin_lock_irqsave(&res->reg_slock, flags);
mixer_vsync_set_update(mixer_ctx, false);
mixer_cfg_layer(mixer_ctx, win, false);
mixer_vsync_set_update(mixer_ctx, true);
spin_unlock_irqrestore(&res->reg_slock, flags);
mixer_ctx->win_data[win].enabled = false;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
int mixer_check_timing(void *ctx, struct fb_videomode *timing)
{
struct mixer_context *mixer_ctx = ctx;
u32 w, h;
w = timing->xres;
h = timing->yres;
DRM_DEBUG_KMS("%s : xres=%d, yres=%d, refresh=%d, intl=%d\n",
__func__, timing->xres, timing->yres,
timing->refresh, (timing->vmode &
FB_VMODE_INTERLACED) ? true : false);
if (mixer_ctx->mxr_ver == MXR_VER_0_0_0_16)
return 0;
if ((w >= 464 && w <= 720 && h >= 261 && h <= 576) ||
(w >= 1024 && w <= 1280 && h >= 576 && h <= 720) ||
(w >= 1664 && w <= 1920 && h >= 936 && h <= 1080))
return 0;
return -EINVAL;
}
static void mixer_wait_for_vblank(void *ctx)
{
struct mixer_context *mixer_ctx = ctx;
mutex_lock(&mixer_ctx->mixer_mutex);
if (!mixer_ctx->powered) {
mutex_unlock(&mixer_ctx->mixer_mutex);
return;
}
mutex_unlock(&mixer_ctx->mixer_mutex);
atomic_set(&mixer_ctx->wait_vsync_event, 1);
/*
* wait for MIXER to signal VSYNC interrupt or return after
* timeout which is set to 50ms (refresh rate of 20).
*/
if (!wait_event_timeout(mixer_ctx->wait_vsync_queue,
!atomic_read(&mixer_ctx->wait_vsync_event),
DRM_HZ/20))
DRM_DEBUG_KMS("vblank wait timed out.\n");
}
static void mixer_window_suspend(struct mixer_context *ctx)
{
struct hdmi_win_data *win_data;
int i;
for (i = 0; i < MIXER_WIN_NR; i++) {
win_data = &ctx->win_data[i];
win_data->resume = win_data->enabled;
mixer_win_disable(ctx, i);
}
mixer_wait_for_vblank(ctx);
}
static void mixer_window_resume(struct mixer_context *ctx)
{
struct hdmi_win_data *win_data;
int i;
for (i = 0; i < MIXER_WIN_NR; i++) {
win_data = &ctx->win_data[i];
win_data->enabled = win_data->resume;
win_data->resume = false;
}
}
static void mixer_poweron(struct mixer_context *ctx)
{
struct mixer_resources *res = &ctx->mixer_res;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
mutex_lock(&ctx->mixer_mutex);
if (ctx->powered) {
mutex_unlock(&ctx->mixer_mutex);
return;
}
ctx->powered = true;
mutex_unlock(&ctx->mixer_mutex);
clk_enable(res->mixer);
if (ctx->vp_enabled) {
clk_enable(res->vp);
clk_enable(res->sclk_mixer);
}
mixer_reg_write(res, MXR_INT_EN, ctx->int_en);
mixer_win_reset(ctx);
mixer_window_resume(ctx);
}
static void mixer_poweroff(struct mixer_context *ctx)
{
struct mixer_resources *res = &ctx->mixer_res;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
mutex_lock(&ctx->mixer_mutex);
if (!ctx->powered)
goto out;
mutex_unlock(&ctx->mixer_mutex);
mixer_window_suspend(ctx);
ctx->int_en = mixer_reg_read(res, MXR_INT_EN);
clk_disable(res->mixer);
if (ctx->vp_enabled) {
clk_disable(res->vp);
clk_disable(res->sclk_mixer);
}
mutex_lock(&ctx->mixer_mutex);
ctx->powered = false;
out:
mutex_unlock(&ctx->mixer_mutex);
}
static void mixer_dpms(void *ctx, int mode)
{
struct mixer_context *mixer_ctx = ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
switch (mode) {
case DRM_MODE_DPMS_ON:
if (pm_runtime_suspended(mixer_ctx->dev))
pm_runtime_get_sync(mixer_ctx->dev);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
if (!pm_runtime_suspended(mixer_ctx->dev))
pm_runtime_put_sync(mixer_ctx->dev);
break;
default:
DRM_DEBUG_KMS("unknown dpms mode: %d\n", mode);
break;
}
}
static struct exynos_mixer_ops mixer_ops = {
/* manager */
.iommu_on = mixer_iommu_on,
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
.enable_vblank = mixer_enable_vblank,
.disable_vblank = mixer_disable_vblank,
.wait_for_vblank = mixer_wait_for_vblank,
.dpms = mixer_dpms,
/* overlay */
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
.win_mode_set = mixer_win_mode_set,
.win_commit = mixer_win_commit,
.win_disable = mixer_win_disable,
/* display */
.check_timing = mixer_check_timing,
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
};
static irqreturn_t mixer_irq_handler(int irq, void *arg)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx = arg;
struct mixer_context *ctx = drm_hdmi_ctx->ctx;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
struct mixer_resources *res = &ctx->mixer_res;
u32 val, base, shadow;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
spin_lock(&res->reg_slock);
/* read interrupt status for handling and clearing flags for VSYNC */
val = mixer_reg_read(res, MXR_INT_STATUS);
/* handling VSYNC */
if (val & MXR_INT_STATUS_VSYNC) {
/* interlace scan need to check shadow register */
if (ctx->interlace) {
base = mixer_reg_read(res, MXR_GRAPHIC_BASE(0));
shadow = mixer_reg_read(res, MXR_GRAPHIC_BASE_S(0));
if (base != shadow)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
goto out;
base = mixer_reg_read(res, MXR_GRAPHIC_BASE(1));
shadow = mixer_reg_read(res, MXR_GRAPHIC_BASE_S(1));
if (base != shadow)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
goto out;
}
drm_handle_vblank(drm_hdmi_ctx->drm_dev, ctx->pipe);
exynos_drm_crtc_finish_pageflip(drm_hdmi_ctx->drm_dev,
ctx->pipe);
/* set wait vsync event to zero and wake up queue. */
if (atomic_read(&ctx->wait_vsync_event)) {
atomic_set(&ctx->wait_vsync_event, 0);
DRM_WAKEUP(&ctx->wait_vsync_queue);
}
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
out:
/* clear interrupts */
if (~val & MXR_INT_EN_VSYNC) {
/* vsync interrupt use different bit for read and clear */
val &= ~MXR_INT_EN_VSYNC;
val |= MXR_INT_CLEAR_VSYNC;
}
mixer_reg_write(res, MXR_INT_STATUS, val);
spin_unlock(&res->reg_slock);
return IRQ_HANDLED;
}
static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx,
struct platform_device *pdev)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
{
struct mixer_context *mixer_ctx = ctx->ctx;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
struct device *dev = &pdev->dev;
struct mixer_resources *mixer_res = &mixer_ctx->mixer_res;
struct resource *res;
int ret;
spin_lock_init(&mixer_res->reg_slock);
mixer_res->mixer = devm_clk_get(dev, "mixer");
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (IS_ERR_OR_NULL(mixer_res->mixer)) {
dev_err(dev, "failed to get clock 'mixer'\n");
return -ENODEV;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
mixer_res->sclk_hdmi = devm_clk_get(dev, "sclk_hdmi");
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (IS_ERR_OR_NULL(mixer_res->sclk_hdmi)) {
dev_err(dev, "failed to get clock 'sclk_hdmi'\n");
return -ENODEV;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (res == NULL) {
dev_err(dev, "get memory resource failed.\n");
return -ENXIO;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
mixer_res->mixer_regs = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (mixer_res->mixer_regs == NULL) {
dev_err(dev, "register mapping failed.\n");
return -ENXIO;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (res == NULL) {
dev_err(dev, "get interrupt resource failed.\n");
return -ENXIO;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
ret = devm_request_irq(&pdev->dev, res->start, mixer_irq_handler,
0, "drm_mixer", ctx);
if (ret) {
dev_err(dev, "request interrupt failed.\n");
return ret;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
mixer_res->irq = res->start;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
return 0;
}
static int vp_resources_init(struct exynos_drm_hdmi_context *ctx,
struct platform_device *pdev)
{
struct mixer_context *mixer_ctx = ctx->ctx;
struct device *dev = &pdev->dev;
struct mixer_resources *mixer_res = &mixer_ctx->mixer_res;
struct resource *res;
mixer_res->vp = devm_clk_get(dev, "vp");
if (IS_ERR_OR_NULL(mixer_res->vp)) {
dev_err(dev, "failed to get clock 'vp'\n");
return -ENODEV;
}
mixer_res->sclk_mixer = devm_clk_get(dev, "sclk_mixer");
if (IS_ERR_OR_NULL(mixer_res->sclk_mixer)) {
dev_err(dev, "failed to get clock 'sclk_mixer'\n");
return -ENODEV;
}
mixer_res->sclk_dac = devm_clk_get(dev, "sclk_dac");
if (IS_ERR_OR_NULL(mixer_res->sclk_dac)) {
dev_err(dev, "failed to get clock 'sclk_dac'\n");
return -ENODEV;
}
if (mixer_res->sclk_hdmi)
clk_set_parent(mixer_res->sclk_mixer, mixer_res->sclk_hdmi);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (res == NULL) {
dev_err(dev, "get memory resource failed.\n");
return -ENXIO;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
mixer_res->vp_regs = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
if (mixer_res->vp_regs == NULL) {
dev_err(dev, "register mapping failed.\n");
return -ENXIO;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
}
return 0;
}
static struct mixer_drv_data exynos5_mxr_drv_data = {
.version = MXR_VER_16_0_33_0,
.is_vp_enabled = 0,
};
static struct mixer_drv_data exynos4_mxr_drv_data = {
.version = MXR_VER_0_0_0_16,
.is_vp_enabled = 1,
};
static struct platform_device_id mixer_driver_types[] = {
{
.name = "s5p-mixer",
.driver_data = (unsigned long)&exynos4_mxr_drv_data,
}, {
.name = "exynos5-mixer",
.driver_data = (unsigned long)&exynos5_mxr_drv_data,
}, {
/* end node */
}
};
static struct of_device_id mixer_match_types[] = {
{
.compatible = "samsung,exynos5-mixer",
.data = &exynos5_mxr_drv_data,
}, {
/* end node */
}
};
static int mixer_probe(struct platform_device *pdev)
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
{
struct device *dev = &pdev->dev;
struct exynos_drm_hdmi_context *drm_hdmi_ctx;
struct mixer_context *ctx;
struct mixer_drv_data *drv;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
int ret;
dev_info(dev, "probe start\n");
drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx),
GFP_KERNEL);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (!drm_hdmi_ctx) {
DRM_ERROR("failed to allocate common hdmi context.\n");
return -ENOMEM;
}
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
if (!ctx) {
DRM_ERROR("failed to alloc mixer context.\n");
return -ENOMEM;
}
mutex_init(&ctx->mixer_mutex);
if (dev->of_node) {
const struct of_device_id *match;
match = of_match_node(of_match_ptr(mixer_match_types),
pdev->dev.of_node);
drv = (struct mixer_drv_data *)match->data;
} else {
drv = (struct mixer_drv_data *)
platform_get_device_id(pdev)->driver_data;
}
ctx->dev = &pdev->dev;
ctx->parent_ctx = (void *)drm_hdmi_ctx;
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
drm_hdmi_ctx->ctx = (void *)ctx;
ctx->vp_enabled = drv->is_vp_enabled;
ctx->mxr_ver = drv->version;
DRM_INIT_WAITQUEUE(&ctx->wait_vsync_queue);
atomic_set(&ctx->wait_vsync_event, 0);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
platform_set_drvdata(pdev, drm_hdmi_ctx);
/* acquire resources: regs, irqs, clocks */
ret = mixer_resources_init(drm_hdmi_ctx, pdev);
if (ret) {
DRM_ERROR("mixer_resources_init failed\n");
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
goto fail;
}
if (ctx->vp_enabled) {
/* acquire vp resources: regs, irqs, clocks */
ret = vp_resources_init(drm_hdmi_ctx, pdev);
if (ret) {
DRM_ERROR("vp_resources_init failed\n");
goto fail;
}
}
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
/* attach mixer driver to common hdmi. */
exynos_mixer_drv_attach(drm_hdmi_ctx);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
/* register specific callback point to common hdmi. */
exynos_mixer_ops_register(&mixer_ops);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
pm_runtime_enable(dev);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
return 0;
fail:
dev_info(dev, "probe failed\n");
return ret;
}
static int mixer_remove(struct platform_device *pdev)
{
dev_info(&pdev->dev, "remove successful\n");
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
pm_runtime_disable(&pdev->dev);
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mixer_suspend(struct device *dev)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx = get_mixer_context(dev);
struct mixer_context *ctx = drm_hdmi_ctx->ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
if (pm_runtime_suspended(dev)) {
DRM_DEBUG_KMS("%s : Already suspended\n", __func__);
return 0;
}
mixer_poweroff(ctx);
return 0;
}
static int mixer_resume(struct device *dev)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx = get_mixer_context(dev);
struct mixer_context *ctx = drm_hdmi_ctx->ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
if (!pm_runtime_suspended(dev)) {
DRM_DEBUG_KMS("%s : Already resumed\n", __func__);
return 0;
}
mixer_poweron(ctx);
return 0;
}
#endif
#ifdef CONFIG_PM_RUNTIME
static int mixer_runtime_suspend(struct device *dev)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx = get_mixer_context(dev);
struct mixer_context *ctx = drm_hdmi_ctx->ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
mixer_poweroff(ctx);
return 0;
}
static int mixer_runtime_resume(struct device *dev)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx = get_mixer_context(dev);
struct mixer_context *ctx = drm_hdmi_ctx->ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
mixer_poweron(ctx);
return 0;
}
#endif
static const struct dev_pm_ops mixer_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mixer_suspend, mixer_resume)
SET_RUNTIME_PM_OPS(mixer_runtime_suspend, mixer_runtime_resume, NULL)
};
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
struct platform_driver mixer_driver = {
.driver = {
.name = "exynos-mixer",
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
.owner = THIS_MODULE,
.pm = &mixer_pm_ops,
.of_match_table = mixer_match_types,
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
},
.probe = mixer_probe,
.remove = mixer_remove,
.id_table = mixer_driver_types,
drm/exynos: added hdmi display support This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164 Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-12-21 16:39:39 +08:00
};