2015-03-18 17:52:17 +08:00
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
|
#include "tegra124.dtsi"
|
|
|
|
|
|
|
|
|
|
/ {
|
|
|
|
|
aliases {
|
|
|
|
|
rtc0 = "/i2c@0,7000d000/pmic@40";
|
|
|
|
|
rtc1 = "/rtc@0,7000e000";
|
|
|
|
|
serial0 = &uarta;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
memory {
|
|
|
|
|
reg = <0x0 0x80000000 0x0 0x80000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
host1x@0,50000000 {
|
|
|
|
|
hdmi@0,54280000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
vdd-supply = <&vdd_3v3_hdmi>;
|
|
|
|
|
pll-supply = <&vdd_hdmi_pll>;
|
|
|
|
|
hdmi-supply = <&vdd_5v0_hdmi>;
|
|
|
|
|
|
|
|
|
|
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
|
|
|
|
|
nvidia,hpd-gpio =
|
|
|
|
|
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sor@0,54540000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
nvidia,dpaux = <&dpaux>;
|
|
|
|
|
nvidia,panel = <&panel>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
dpaux@0,545c0000 {
|
|
|
|
|
vdd-supply = <&vdd_3v3_panel>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
serial@0,70006000 {
|
|
|
|
|
/* Debug connector on the bottom of the board near SD card. */
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pwm@0,7000a000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@0,7000c000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
|
|
|
|
|
acodec: audio-codec@10 {
|
|
|
|
|
compatible = "maxim,max98090";
|
|
|
|
|
reg = <0x10>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
temperature-sensor@4c {
|
|
|
|
|
compatible = "ti,tmp451";
|
|
|
|
|
reg = <0x4c>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
|
|
|
|
|
#thermal-sensor-cells = <1>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@0,7000c400 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
2015-03-18 17:52:20 +08:00
|
|
|
|
|
|
|
|
trackpad@15 {
|
|
|
|
|
compatible = "elan,ekth3000";
|
|
|
|
|
reg = <0x15>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
};
|
2015-03-18 17:52:17 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@0,7000c500 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
|
|
|
|
tpm@20 {
|
|
|
|
|
compatible = "infineon,slb9645tt";
|
|
|
|
|
reg = <0x20>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
hdmi_ddc: i2c@0,7000c700 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@0,7000d000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
|
|
|
|
pmic: pmic@40 {
|
|
|
|
|
compatible = "ams,as3722";
|
|
|
|
|
reg = <0x40>;
|
|
|
|
|
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
|
|
|
|
|
|
ams,system-power-controller;
|
|
|
|
|
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&as3722_default>;
|
|
|
|
|
|
|
|
|
|
as3722_default: pinmux {
|
|
|
|
|
gpio0 {
|
|
|
|
|
pins = "gpio0";
|
|
|
|
|
function = "gpio";
|
|
|
|
|
bias-pull-down;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio1 {
|
|
|
|
|
pins = "gpio1";
|
|
|
|
|
function = "gpio";
|
|
|
|
|
bias-pull-up;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio2_4_7 {
|
|
|
|
|
pins = "gpio2", "gpio4", "gpio7";
|
|
|
|
|
function = "gpio";
|
|
|
|
|
bias-pull-up;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio3_6 {
|
|
|
|
|
pins = "gpio3", "gpio6";
|
|
|
|
|
bias-high-impedance;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio5 {
|
|
|
|
|
pins = "gpio5";
|
|
|
|
|
function = "clk32k-out";
|
|
|
|
|
bias-pull-down;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
vsup-sd2-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vsup-sd3-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vsup-sd4-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vsup-sd5-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vin-ldo0-supply = <&vdd_1v35_lp0>;
|
|
|
|
|
vin-ldo1-6-supply = <&vdd_3v3_run>;
|
|
|
|
|
vin-ldo2-5-7-supply = <&vddio_1v8>;
|
|
|
|
|
vin-ldo3-4-supply = <&vdd_3v3_sys>;
|
|
|
|
|
vin-ldo9-10-supply = <&vdd_5v0_sys>;
|
|
|
|
|
vin-ldo11-supply = <&vdd_3v3_run>;
|
|
|
|
|
|
2015-06-03 19:43:41 +08:00
|
|
|
vdd_cpu: sd0 {
|
2015-03-18 17:52:17 +08:00
|
|
|
regulator-name = "+VDD_CPU_AP";
|
|
|
|
|
regulator-min-microvolt = <700000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-min-microamp = <3500000>;
|
|
|
|
|
regulator-max-microamp = <3500000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
ams,ext-control = <2>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sd1 {
|
|
|
|
|
regulator-name = "+VDD_CORE";
|
|
|
|
|
regulator-min-microvolt = <700000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-min-microamp = <2500000>;
|
|
|
|
|
regulator-max-microamp = <4000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
ams,ext-control = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_1v35_lp0: sd2 {
|
|
|
|
|
regulator-name = "+1.35V_LP0(sd2)";
|
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sd3 {
|
|
|
|
|
regulator-name = "+1.35V_LP0(sd3)";
|
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_1v05_run: sd4 {
|
|
|
|
|
regulator-name = "+1.05V_RUN";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vddio_1v8: sd5 {
|
|
|
|
|
regulator-name = "+1.8V_VDDIO";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sd6 {
|
|
|
|
|
regulator-name = "+VDD_GPU_AP";
|
|
|
|
|
regulator-min-microvolt = <650000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-min-microamp = <3500000>;
|
|
|
|
|
regulator-max-microamp = <3500000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo0 {
|
|
|
|
|
regulator-name = "+1.05V_RUN_AVDD";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
ams,ext-control = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo1 {
|
|
|
|
|
regulator-name = "+1.8V_RUN_CAM";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo2 {
|
|
|
|
|
regulator-name = "+1.2V_GEN_AVDD";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo3 {
|
|
|
|
|
regulator-name = "+1.00V_LP0_VDD_RTC";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
ams,enable-tracking;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_run_cam: ldo4 {
|
|
|
|
|
regulator-name = "+3.3V_RUN_CAM";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo5 {
|
|
|
|
|
regulator-name = "+1.2V_RUN_CAM_FRONT";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vddio_sdmmc3: ldo6 {
|
|
|
|
|
regulator-name = "+VDDIO_SDMMC3";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo7 {
|
|
|
|
|
regulator-name = "+1.05V_RUN_CAM_REAR";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo9 {
|
|
|
|
|
regulator-name = "+2.8V_RUN_TOUCH";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo10 {
|
|
|
|
|
regulator-name = "+2.8V_RUN_CAM_AF";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo11 {
|
|
|
|
|
regulator-name = "+1.8V_RUN_VPP_FUSE";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
spi@0,7000d400 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
cros_ec: cros-ec@0 {
|
|
|
|
|
compatible = "google,cros-ec-spi";
|
|
|
|
|
spi-max-frequency = <3000000>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
reg = <0>;
|
|
|
|
|
|
|
|
|
|
google,cros-ec-spi-msg-delay = <2000>;
|
|
|
|
|
|
|
|
|
|
i2c-tunnel {
|
|
|
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
google,remote-bus = <0>;
|
|
|
|
|
|
|
|
|
|
charger: bq24735@9 {
|
|
|
|
|
compatible = "ti,bq24735";
|
|
|
|
|
reg = <0x9>;
|
|
|
|
|
interrupt-parent = <&gpio>;
|
|
|
|
|
interrupts = <TEGRA_GPIO(J, 0)
|
|
|
|
|
GPIO_ACTIVE_HIGH>;
|
|
|
|
|
ti,ac-detect-gpios = <&gpio
|
|
|
|
|
TEGRA_GPIO(J, 0)
|
|
|
|
|
GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
battery: sbs-battery@b {
|
|
|
|
|
compatible = "sbs,sbs-battery";
|
|
|
|
|
reg = <0xb>;
|
|
|
|
|
sbs,i2c-retry-count = <2>;
|
|
|
|
|
sbs,poll-retry-count = <10>;
|
|
|
|
|
power-supplies = <&charger>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
spi@0,7000da00 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
spi-max-frequency = <25000000>;
|
|
|
|
|
|
|
|
|
|
flash@0 {
|
|
|
|
|
compatible = "winbond,w25q32dw";
|
2015-03-18 17:52:23 +08:00
|
|
|
spi-max-frequency = <25000000>;
|
2015-03-18 17:52:17 +08:00
|
|
|
reg = <0>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pmc@0,7000e400 {
|
|
|
|
|
nvidia,invert-interrupt;
|
|
|
|
|
nvidia,suspend-mode = <0>;
|
|
|
|
|
nvidia,cpu-pwr-good-time = <500>;
|
|
|
|
|
nvidia,cpu-pwr-off-time = <300>;
|
|
|
|
|
nvidia,core-pwr-good-time = <641 3845>;
|
|
|
|
|
nvidia,core-pwr-off-time = <61036>;
|
|
|
|
|
nvidia,core-power-req-active-high;
|
|
|
|
|
nvidia,sys-clock-req-active-high;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
hda@0,70030000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2015-03-18 17:52:21 +08:00
|
|
|
sdhci0_pwrseq: sdhci0_pwrseq {
|
|
|
|
|
compatible = "mmc-pwrseq-simple";
|
|
|
|
|
|
|
|
|
|
reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-03-18 17:52:17 +08:00
|
|
|
sdhci@0,700b0000 { /* WiFi/BT on this bus */
|
|
|
|
|
status = "okay";
|
|
|
|
|
bus-width = <4>;
|
|
|
|
|
no-1-8-v;
|
|
|
|
|
non-removable;
|
2015-03-18 17:52:21 +08:00
|
|
|
mmc-pwrseq = <&sdhci0_pwrseq>;
|
|
|
|
|
vmmc-supply = <&vdd_3v3_lp0>;
|
|
|
|
|
vqmmc-supply = <&vddio_1v8>;
|
2015-03-18 17:52:27 +08:00
|
|
|
keep-power-in-suspend;
|
2015-03-18 17:52:17 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdhci@0,700b0400 { /* SD Card on this bus */
|
|
|
|
|
status = "okay";
|
|
|
|
|
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
|
|
|
|
|
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
bus-width = <4>;
|
|
|
|
|
no-1-8-v;
|
|
|
|
|
vqmmc-supply = <&vddio_sdmmc3>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdhci@0,700b0600 { /* eMMC on this bus */
|
|
|
|
|
status = "okay";
|
|
|
|
|
bus-width = <8>;
|
|
|
|
|
no-1-8-v;
|
|
|
|
|
non-removable;
|
|
|
|
|
};
|
|
|
|
|
|
2015-06-03 19:43:41 +08:00
|
|
|
/* CPU DFLL clock */
|
|
|
|
|
clock@0,70110000 {
|
2015-12-08 18:26:49 +08:00
|
|
|
status = "disabled";
|
2015-06-03 19:43:41 +08:00
|
|
|
vdd-cpu-supply = <&vdd_cpu>;
|
|
|
|
|
nvidia,i2c-fs-rate = <400000>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-03-18 17:52:17 +08:00
|
|
|
ahub@0,70300000 {
|
|
|
|
|
i2s@0,70301100 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@0,7d000000 { /* Rear external USB port. */
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb-phy@0,7d000000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
vbus-supply = <&vdd_usb1_vbus>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@0,7d004000 { /* Internal webcam. */
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb-phy@0,7d004000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
vbus-supply = <&vdd_run_cam>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb@0,7d008000 { /* Left external USB port. */
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb-phy@0,7d008000 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
vbus-supply = <&vdd_usb3_vbus>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
backlight: backlight {
|
|
|
|
|
compatible = "pwm-backlight";
|
|
|
|
|
|
|
|
|
|
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
power-supply = <&vdd_led>;
|
|
|
|
|
pwms = <&pwm 1 1000000>;
|
|
|
|
|
|
|
|
|
|
default-brightness-level = <224>;
|
|
|
|
|
brightness-levels =
|
|
|
|
|
< 0 1 2 3 4 5 6 7
|
|
|
|
|
8 9 10 11 12 13 14 15
|
|
|
|
|
16 17 18 19 20 21 22 23
|
|
|
|
|
24 25 26 27 28 29 30 31
|
|
|
|
|
32 33 34 35 36 37 38 39
|
|
|
|
|
40 41 42 43 44 45 46 47
|
|
|
|
|
48 49 50 51 52 53 54 55
|
|
|
|
|
56 57 58 59 60 61 62 63
|
|
|
|
|
64 65 66 67 68 69 70 71
|
|
|
|
|
72 73 74 75 76 77 78 79
|
|
|
|
|
80 81 82 83 84 85 86 87
|
|
|
|
|
88 89 90 91 92 93 94 95
|
|
|
|
|
96 97 98 99 100 101 102 103
|
|
|
|
|
104 105 106 107 108 109 110 111
|
|
|
|
|
112 113 114 115 116 117 118 119
|
|
|
|
|
120 121 122 123 124 125 126 127
|
|
|
|
|
128 129 130 131 132 133 134 135
|
|
|
|
|
136 137 138 139 140 141 142 143
|
|
|
|
|
144 145 146 147 148 149 150 151
|
|
|
|
|
152 153 154 155 156 157 158 159
|
|
|
|
|
160 161 162 163 164 165 166 167
|
|
|
|
|
168 169 170 171 172 173 174 175
|
|
|
|
|
176 177 178 179 180 181 182 183
|
|
|
|
|
184 185 186 187 188 189 190 191
|
|
|
|
|
192 193 194 195 196 197 198 199
|
|
|
|
|
200 201 202 203 204 205 206 207
|
|
|
|
|
208 209 210 211 212 213 214 215
|
|
|
|
|
216 217 218 219 220 221 222 223
|
|
|
|
|
224 225 226 227 228 229 230 231
|
|
|
|
|
232 233 234 235 236 237 238 239
|
|
|
|
|
240 241 242 243 244 245 246 247
|
|
|
|
|
248 249 250 251 252 253 254 255
|
|
|
|
|
256>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
clocks {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
clk32k_in: clock@0 {
|
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
#clock-cells = <0>;
|
|
|
|
|
clock-frequency = <32768>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2015-06-03 19:43:41 +08:00
|
|
|
cpus {
|
|
|
|
|
cpu@0 {
|
|
|
|
|
vdd-cpu-supply = <&vdd_cpu>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2015-03-18 17:52:17 +08:00
|
|
|
gpio-keys {
|
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
|
|
lid {
|
|
|
|
|
label = "Lid";
|
|
|
|
|
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
|
|
|
|
|
linux,input-type = <5>;
|
|
|
|
|
linux,code = <KEY_RESERVED>;
|
|
|
|
|
debounce-interval = <1>;
|
|
|
|
|
gpio-key,wakeup;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
power {
|
|
|
|
|
label = "Power";
|
|
|
|
|
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
|
|
|
|
|
linux,code = <KEY_POWER>;
|
|
|
|
|
debounce-interval = <30>;
|
|
|
|
|
gpio-key,wakeup;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
vdd_mux: regulator@0 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
regulator-name = "+VDD_MUX";
|
|
|
|
|
regulator-min-microvolt = <12000000>;
|
|
|
|
|
regulator-max-microvolt = <12000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_5v0_sys: regulator@1 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <1>;
|
|
|
|
|
regulator-name = "+5V_SYS";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
vin-supply = <&vdd_mux>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_sys: regulator@2 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <2>;
|
|
|
|
|
regulator-name = "+3.3V_SYS";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
vin-supply = <&vdd_mux>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_run: regulator@3 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <3>;
|
|
|
|
|
regulator-name = "+3.3V_RUN";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_3v3_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_hdmi: regulator@4 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <4>;
|
|
|
|
|
regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
vin-supply = <&vdd_3v3_run>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_led: regulator@5 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <5>;
|
|
|
|
|
regulator-name = "+VDD_LED";
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_mux>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_5v0_ts: regulator@6 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <6>;
|
|
|
|
|
regulator-name = "+5V_VDD_TS_SW";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_usb1_vbus: regulator@7 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <7>;
|
|
|
|
|
regulator-name = "+5V_USB_HS";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio-open-drain;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_usb3_vbus: regulator@8 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <8>;
|
|
|
|
|
regulator-name = "+5V_USB_SS";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio-open-drain;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_panel: regulator@9 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <9>;
|
|
|
|
|
regulator-name = "+3.3V_PANEL";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_3v3_run>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3_lp0: regulator@10 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <10>;
|
|
|
|
|
regulator-name = "+3.3V_LP0";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
/*
|
|
|
|
|
* TODO: find a way to wire this up with the USB EHCI
|
|
|
|
|
* controllers so that it can be enabled on demand.
|
|
|
|
|
*/
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_3v3_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_hdmi_pll: regulator@11 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <11>;
|
|
|
|
|
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
|
|
|
|
|
vin-supply = <&vdd_1v05_run>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_5v0_hdmi: regulator@12 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
reg = <12>;
|
|
|
|
|
regulator-name = "+5V_HDMI_CON";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
vin-supply = <&vdd_5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sound {
|
|
|
|
|
nvidia,audio-routing =
|
|
|
|
|
"Headphones", "HPR",
|
|
|
|
|
"Headphones", "HPL",
|
|
|
|
|
"Speakers", "SPKR",
|
|
|
|
|
"Speakers", "SPKL",
|
|
|
|
|
"Mic Jack", "MICBIAS",
|
|
|
|
|
"DMICL", "Int Mic",
|
|
|
|
|
"DMICR", "Int Mic",
|
|
|
|
|
"IN34", "Mic Jack";
|
|
|
|
|
|
|
|
|
|
nvidia,i2s-controller = <&tegra_i2s1>;
|
|
|
|
|
nvidia,audio-codec = <&acodec>;
|
|
|
|
|
|
|
|
|
|
clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
|
|
|
|
|
<&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
|
|
|
|
|
<&tegra_car TEGRA124_CLK_EXTERN1>;
|
|
|
|
|
clock-names = "pll_a", "pll_a_out0", "mclk";
|
|
|
|
|
|
|
|
|
|
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
nvidia,mic-det-gpios =
|
|
|
|
|
<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
2015-03-18 17:52:26 +08:00
|
|
|
|
|
|
|
|
gpio-restart {
|
|
|
|
|
compatible = "gpio-restart";
|
|
|
|
|
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
|
|
|
|
|
priority = <200>;
|
|
|
|
|
};
|
2015-03-18 17:52:17 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#include "cros-ec-keyboard.dtsi"
|
