openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/clk/rockchip/clk.h

428 lines
12 KiB
C
Raw Normal View History

clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* based on
*
* samsung/clk.h
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* Copyright (c) 2013 Linaro Ltd.
* Author: Thomas Abraham <thomas.ab@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef CLK_ROCKCHIP_CLK_H
#define CLK_ROCKCHIP_CLK_H
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#define HIWORD_UPDATE(val, mask, shift) \
((val) << (shift) | (mask) << ((shift) + 16))
/* register positions shared by RK2928, RK3066 and RK3188 */
#define RK2928_PLL_CON(x) (x * 0x4)
#define RK2928_MODE_CON 0x40
#define RK2928_CLKSEL_CON(x) (x * 0x4 + 0x44)
#define RK2928_CLKGATE_CON(x) (x * 0x4 + 0xd0)
#define RK2928_GLB_SRST_FST 0x100
#define RK2928_GLB_SRST_SND 0x104
#define RK2928_SOFTRST_CON(x) (x * 0x4 + 0x110)
#define RK2928_MISC_CON 0x134
clk: rockchip: add clock controller for rk3288 Add the clock tree definition for the new rk3288 SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 08:02:37 +08:00
#define RK3288_PLL_CON(x) RK2928_PLL_CON(x)
#define RK3288_MODE_CON 0x50
#define RK3288_CLKSEL_CON(x) (x * 0x4 + 0x60)
#define RK3288_CLKGATE_CON(x) (x * 0x4 + 0x160)
#define RK3288_GLB_SRST_FST 0x1b0
#define RK3288_GLB_SRST_SND 0x1b4
#define RK3288_SOFTRST_CON(x) (x * 0x4 + 0x1b8)
#define RK3288_MISC_CON 0x1e8
clk: rockchip: Add support for the mmc clock phases using the framework This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-27 09:30:27 +08:00
#define RK3288_SDMMC_CON0 0x200
#define RK3288_SDMMC_CON1 0x204
#define RK3288_SDIO0_CON0 0x208
#define RK3288_SDIO0_CON1 0x20c
#define RK3288_SDIO1_CON0 0x210
#define RK3288_SDIO1_CON1 0x214
#define RK3288_EMMC_CON0 0x218
#define RK3288_EMMC_CON1 0x21c
clk: rockchip: add clock controller for rk3288 Add the clock tree definition for the new rk3288 SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 08:02:37 +08:00
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
enum rockchip_pll_type {
pll_rk3066,
};
#define RK3066_PLL_RATE(_rate, _nr, _nf, _no) \
{ \
.rate = _rate##U, \
.nr = _nr, \
.nf = _nf, \
.no = _no, \
.bwadj = (_nf >> 1), \
}
clk: rockchip: change PLL setting for better clock jitter dclk_vop0/1 is the source of HDMI TMDS clock in rk3288, usually we use 594MHz for clock source of dclk_vop0/1. HDMI CTS 7-9 require TMDS Clock jitter is lower than 0.25*Tbit: TMDS clock(MHz) CTS require jitter (ps) 297 84.2 148.5 168 74.25 336 27 1247 PLL BW and VCO frequency effects the jitter of PLL output clock, clock jitter is better if BW is lower or VCO frequency is higher. If PLL use default setting of RK3066_PLL_RATE( 594000000, 2, 198, 4), the TMDS Clock jitter is higher than 250ps, which means we can't pass the test when TMDS clock is 297MHz or 148.5MHz. If we use RK3066_PLL_RATE_BWADJ(594000000, 1, 198, 8, 1), the TMDS Clock jitter is about 60ps and we can pass all test case. So we need this patch to make hdmi si test pass. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-10 13:23:57 +08:00
#define RK3066_PLL_RATE_BWADJ(_rate, _nr, _nf, _no, _bw) \
{ \
.rate = _rate##U, \
.nr = _nr, \
.nf = _nf, \
.no = _no, \
.bwadj = _bw, \
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
struct rockchip_pll_rate_table {
unsigned long rate;
unsigned int nr;
unsigned int nf;
unsigned int no;
unsigned int bwadj;
};
/**
* struct rockchip_pll_clock: information about pll clock
* @id: platform specific id of the clock.
* @name: name of this pll clock.
* @parent_name: name of the parent clock.
* @flags: optional flags for basic clock.
* @con_offset: offset of the register for configuring the PLL.
* @mode_offset: offset of the register for configuring the PLL-mode.
* @mode_shift: offset inside the mode-register for the mode of this pll.
* @lock_shift: offset inside the lock register for the lock status.
* @type: Type of PLL to be registered.
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:50 +08:00
* @pll_flags: hardware-specific flags
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
* @rate_table: Table of usable pll rates
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:52 +08:00
*
* Flags:
* ROCKCHIP_PLL_SYNC_RATE - check rate parameters to match against the
* rate_table parameters and ajust them if necessary.
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
*/
struct rockchip_pll_clock {
unsigned int id;
const char *name;
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
const char *const *parent_names;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
u8 num_parents;
unsigned long flags;
int con_offset;
int mode_offset;
int mode_shift;
int lock_shift;
enum rockchip_pll_type type;
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:50 +08:00
u8 pll_flags;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
struct rockchip_pll_rate_table *rate_table;
};
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:52 +08:00
#define ROCKCHIP_PLL_SYNC_RATE BIT(0)
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
#define PLL(_type, _id, _name, _pnames, _flags, _con, _mode, _mshift, \
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:50 +08:00
_lshift, _pflags, _rtable) \
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
{ \
.id = _id, \
.type = _type, \
.name = _name, \
.parent_names = _pnames, \
.num_parents = ARRAY_SIZE(_pnames), \
.flags = CLK_GET_RATE_NOCACHE | _flags, \
.con_offset = _con, \
.mode_offset = _mode, \
.mode_shift = _mshift, \
.lock_shift = _lshift, \
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:50 +08:00
.pll_flags = _pflags, \
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
.rate_table = _rtable, \
}
struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
const char *name, const char *const *parent_names,
u8 num_parents, void __iomem *base, int con_offset,
int grf_lock_offset, int lock_shift, int reg_mode,
int mode_shift, struct rockchip_pll_rate_table *rate_table,
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-21 03:38:50 +08:00
u8 clk_pll_flags, spinlock_t *lock);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
clk: rockchip: add new clock-type for the cpuclk When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-05 04:10:43 +08:00
struct rockchip_cpuclk_clksel {
int reg;
u32 val;
};
#define ROCKCHIP_CPUCLK_NUM_DIVIDERS 2
struct rockchip_cpuclk_rate_table {
unsigned long prate;
struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS];
};
/**
* struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock
* @core_reg: register offset of the core settings register
* @div_core_shift: core divider offset used to divide the pll value
* @div_core_mask: core divider mask
* @mux_core_shift: offset of the core multiplexer
*/
struct rockchip_cpuclk_reg_data {
int core_reg;
u8 div_core_shift;
u32 div_core_mask;
int mux_core_reg;
u8 mux_core_shift;
};
struct clk *rockchip_clk_register_cpuclk(const char *name,
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
const char *const *parent_names, u8 num_parents,
clk: rockchip: add new clock-type for the cpuclk When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-05 04:10:43 +08:00
const struct rockchip_cpuclk_reg_data *reg_data,
const struct rockchip_cpuclk_rate_table *rates,
int nrates, void __iomem *reg_base, spinlock_t *lock);
clk: rockchip: Add support for the mmc clock phases using the framework This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-27 09:30:27 +08:00
struct clk *rockchip_clk_register_mmc(const char *name,
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
const char *const *parent_names, u8 num_parents,
clk: rockchip: Add support for the mmc clock phases using the framework This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-27 09:30:27 +08:00
void __iomem *reg, int shift);
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
#define PNAME(x) static const char *const x[] __initconst
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
enum rockchip_clk_branch_type {
branch_composite,
branch_mux,
branch_divider,
branch_fraction_divider,
branch_gate,
clk: rockchip: Add support for the mmc clock phases using the framework This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-27 09:30:27 +08:00
branch_mmc,
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
};
struct rockchip_clk_branch {
unsigned int id;
enum rockchip_clk_branch_type branch_type;
const char *name;
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
const char *const *parent_names;
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
u8 num_parents;
unsigned long flags;
int muxdiv_offset;
u8 mux_shift;
u8 mux_width;
u8 mux_flags;
u8 div_shift;
u8 div_width;
u8 div_flags;
struct clk_div_table *div_table;
int gate_offset;
u8 gate_shift;
u8 gate_flags;
};
#define COMPOSITE(_id, cname, pnames, f, mo, ms, mw, mf, ds, dw,\
df, go, gs, gf) \
{ \
.id = _id, \
.branch_type = branch_composite, \
.name = cname, \
.parent_names = pnames, \
.num_parents = ARRAY_SIZE(pnames), \
.flags = f, \
.muxdiv_offset = mo, \
.mux_shift = ms, \
.mux_width = mw, \
.mux_flags = mf, \
.div_shift = ds, \
.div_width = dw, \
.div_flags = df, \
.gate_offset = go, \
.gate_shift = gs, \
.gate_flags = gf, \
}
#define COMPOSITE_NOMUX(_id, cname, pname, f, mo, ds, dw, df, \
go, gs, gf) \
{ \
.id = _id, \
.branch_type = branch_composite, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.flags = f, \
.muxdiv_offset = mo, \
.div_shift = ds, \
.div_width = dw, \
.div_flags = df, \
.gate_offset = go, \
.gate_shift = gs, \
.gate_flags = gf, \
}
#define COMPOSITE_NOMUX_DIVTBL(_id, cname, pname, f, mo, ds, dw,\
df, dt, go, gs, gf) \
{ \
.id = _id, \
.branch_type = branch_composite, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.flags = f, \
.muxdiv_offset = mo, \
.div_shift = ds, \
.div_width = dw, \
.div_flags = df, \
.div_table = dt, \
.gate_offset = go, \
.gate_shift = gs, \
.gate_flags = gf, \
}
#define COMPOSITE_NODIV(_id, cname, pnames, f, mo, ms, mw, mf, \
go, gs, gf) \
{ \
.id = _id, \
.branch_type = branch_composite, \
.name = cname, \
.parent_names = pnames, \
.num_parents = ARRAY_SIZE(pnames), \
.flags = f, \
.muxdiv_offset = mo, \
.mux_shift = ms, \
.mux_width = mw, \
.mux_flags = mf, \
.gate_offset = go, \
.gate_shift = gs, \
.gate_flags = gf, \
}
#define COMPOSITE_NOGATE(_id, cname, pnames, f, mo, ms, mw, mf, \
ds, dw, df) \
{ \
.id = _id, \
.branch_type = branch_composite, \
.name = cname, \
.parent_names = pnames, \
.num_parents = ARRAY_SIZE(pnames), \
.flags = f, \
.muxdiv_offset = mo, \
.mux_shift = ms, \
.mux_width = mw, \
.mux_flags = mf, \
.div_shift = ds, \
.div_width = dw, \
.div_flags = df, \
.gate_offset = -1, \
}
#define COMPOSITE_FRAC(_id, cname, pname, f, mo, df, go, gs, gf)\
{ \
.id = _id, \
.branch_type = branch_fraction_divider, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.flags = f, \
.muxdiv_offset = mo, \
.div_shift = 16, \
.div_width = 16, \
.div_flags = df, \
.gate_offset = go, \
.gate_shift = gs, \
.gate_flags = gf, \
}
#define MUX(_id, cname, pnames, f, o, s, w, mf) \
{ \
.id = _id, \
.branch_type = branch_mux, \
.name = cname, \
.parent_names = pnames, \
.num_parents = ARRAY_SIZE(pnames), \
.flags = f, \
.muxdiv_offset = o, \
.mux_shift = s, \
.mux_width = w, \
.mux_flags = mf, \
.gate_offset = -1, \
}
#define DIV(_id, cname, pname, f, o, s, w, df) \
{ \
.id = _id, \
.branch_type = branch_divider, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.flags = f, \
.muxdiv_offset = o, \
.div_shift = s, \
.div_width = w, \
.div_flags = df, \
.gate_offset = -1, \
}
#define DIVTBL(_id, cname, pname, f, o, s, w, df, dt) \
{ \
.id = _id, \
.branch_type = branch_divider, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.flags = f, \
.muxdiv_offset = o, \
.div_shift = s, \
.div_width = w, \
.div_flags = df, \
.div_table = dt, \
}
#define GATE(_id, cname, pname, f, o, b, gf) \
{ \
.id = _id, \
.branch_type = branch_gate, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.flags = f, \
.gate_offset = o, \
.gate_shift = b, \
.gate_flags = gf, \
}
clk: rockchip: Add support for the mmc clock phases using the framework This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-27 09:30:27 +08:00
#define MMC(_id, cname, pname, offset, shift) \
{ \
.id = _id, \
.branch_type = branch_mmc, \
.name = cname, \
.parent_names = (const char *[]){ pname }, \
.num_parents = 1, \
.muxdiv_offset = offset, \
.div_shift = shift, \
}
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
void rockchip_clk_init(struct device_node *np, void __iomem *base,
unsigned long nr_clks);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
struct regmap *rockchip_clk_get_grf(void);
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
void rockchip_clk_add_lookup(struct clk *clk, unsigned int id);
void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list,
unsigned int nr_clk);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:10 +08:00
void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list,
unsigned int nr_pll, int grf_lock_offset);
clk: rockchip: add new clock-type for the cpuclk When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-05 04:10:43 +08:00
void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name,
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 16:45:51 +08:00
const char *const *parent_names, u8 num_parents,
clk: rockchip: add new clock-type for the cpuclk When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-05 04:10:43 +08:00
const struct rockchip_cpuclk_reg_data *reg_data,
const struct rockchip_cpuclk_rate_table *rates,
int nrates);
clk: don't use __initconst for non-const arrays The statement static const char *name[]; defines a modifiable array of pointers to constant chars. That is *name[0] = 'f'; is forbidden, but name[0] = "f"; is not. So marking an array that is defined as above with __initconst is wrong. Either an additional const must be added such that the whole definition reads: static const char *const name[] __initconst; or where this is not possible __initdata must be used. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-18 17:59:45 +08:00
void rockchip_clk_protect_critical(const char *const clocks[], int nclocks);
clk: rockchip: add restart handler Add infrastructure to write the correct value to the restart register and register the restart notifier for both rk3188 (including rk3066) and rk3288. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-20 08:45:38 +08:00
void rockchip_register_restart_notifier(unsigned int reg);
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
clk: rockchip: add reset controller All Rockchip SoCs at least down to the ARM9-based RK28xx include the reset- controller for SoC peripherals in their clock controller. While the older SoCs (ARM9 and Cortex-A8) use a regular scheme to change register values, the Cortex-A9 SoCs use a hiword-mask making locking unecessary. To be compatible with both schemes the reset controller takes a flag to decide which scheme to use, similar to the other HIWORD_MASK flags used in the clock framework. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:59:39 +08:00
#define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0)
#ifdef CONFIG_RESET_CONTROLLER
void rockchip_register_softrst(struct device_node *np,
unsigned int num_regs,
void __iomem *base, u8 flags);
#else
static inline void rockchip_register_softrst(struct device_node *np,
unsigned int num_regs,
void __iomem *base, u8 flags)
{
}
#endif
clk: rockchip: add basic infrastructure for clock branches This adds infrastructure for registering clock branches. On Rockchip SoCs most clock branches are a combination of mux,divider and gate components, thus a composite clock is used when appropriate. Clock branches are supposed to be declared in an array using the COMPOSITE* or MUX, etc makros defined in the header and then registered using rockchip_clk_register_branches. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 07:58:39 +08:00
#endif