linux/sound/usb/line6/toneport.c

577 lines
14 KiB
C
Raw Normal View History

/*
* Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
* Emil Myhrman (emil.myhrman@gmail.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
*/
#include <linux/wait.h>
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <sound/core.h>
#include <sound/control.h>
#include "capture.h"
#include "driver.h"
#include "playback.h"
#include "usbdefs.h"
enum line6_device_type {
LINE6_GUITARPORT,
LINE6_PODSTUDIO_GX,
LINE6_PODSTUDIO_UX1,
LINE6_PODSTUDIO_UX2,
LINE6_TONEPORT_GX,
LINE6_TONEPORT_UX1,
LINE6_TONEPORT_UX2,
};
struct usb_line6_toneport {
/**
Generic Line6 USB data.
*/
struct usb_line6 line6;
/**
Source selector.
*/
int source;
/**
Serial number of device.
*/
int serial_number;
/**
Firmware version (x 100).
*/
int firmware_version;
/**
Timer for delayed PCM startup.
*/
struct timer_list timer;
/**
Device type.
*/
enum line6_device_type type;
};
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2);
#define TONEPORT_PCM_DELAY 1
static struct snd_ratden toneport_ratden = {
.num_min = 44100,
.num_max = 44100,
.num_step = 1,
.den = 1
};
static struct line6_pcm_properties toneport_pcm_properties = {
.snd_line6_playback_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = 44100,
.rate_max = 44100,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 60000,
.period_bytes_min = 64,
.period_bytes_max = 8192,
.periods_min = 1,
.periods_max = 1024},
.snd_line6_capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_SYNC_START),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = 44100,
.rate_max = 44100,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 60000,
.period_bytes_min = 64,
.period_bytes_max = 8192,
.periods_min = 1,
.periods_max = 1024},
.snd_line6_rates = {
.nrats = 1,
.rats = &toneport_ratden},
.bytes_per_frame = 4
};
/*
For the led on Guitarport.
Brightness goes from 0x00 to 0x26. Set a value above this to have led
blink.
(void cmd_0x02(byte red, byte green)
*/
static int led_red = 0x00;
static int led_green = 0x26;
static const struct {
const char *name;
int code;
} toneport_source_info[] = {
{"Microphone", 0x0a01},
{"Line", 0x0801},
{"Instrument", 0x0b01},
{"Inst & Mic", 0x0901}
};
static bool toneport_has_led(enum line6_device_type type)
{
return
(type == LINE6_GUITARPORT) ||
(type == LINE6_TONEPORT_GX);
/* add your device here if you are missing support for the LEDs */
}
static void toneport_update_led(struct device *dev)
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_toneport *tp = usb_get_intfdata(interface);
struct usb_line6 *line6;
if (!tp)
return;
line6 = &tp->line6;
if (line6)
toneport_send_cmd(line6->usbdev, (led_red << 8) | 0x0002,
led_green);
}
static ssize_t toneport_set_led_red(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int retval;
retval = kstrtoint(buf, 10, &led_red);
if (retval)
return retval;
toneport_update_led(dev);
return count;
}
static ssize_t toneport_set_led_green(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int retval;
retval = kstrtoint(buf, 10, &led_green);
if (retval)
return retval;
toneport_update_led(dev);
return count;
}
static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_red);
static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_green);
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
{
int ret;
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
return ret;
}
return 0;
}
/* monitor info callback */
static int snd_toneport_monitor_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 256;
return 0;
}
/* monitor get callback */
static int snd_toneport_monitor_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
ucontrol->value.integer.value[0] = line6pcm->volume_monitor;
return 0;
}
/* monitor put callback */
static int snd_toneport_monitor_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
if (ucontrol->value.integer.value[0] == line6pcm->volume_monitor)
return 0;
line6pcm->volume_monitor = ucontrol->value.integer.value[0];
if (line6pcm->volume_monitor > 0)
staging: line6: separate handling of buffer allocation and stream startup There are several features of the Line6 USB driver which require PCM data to be exchanged with the device: *) PCM playback and capture via ALSA *) software monitoring (for devices without hardware monitoring) *) optional impulse response measurement However, from the device's point of view, there is just a single capture and playback stream, which must be shared between these subsystems. It is therefore necessary to maintain the state of the subsystems with respect to PCM usage. We define several constants of the form LINE6_BIT_PCM_<subsystem>_<direction>_<resource> with the following meanings: *) <subsystem> is one of -) ALSA: PCM playback and capture via ALSA -) MONITOR: software monitoring -) IMPULSE: optional impulse response measurement *) <direction> is one of -) PLAYBACK: audio output (from host to device) -) CAPTURE: audio input (from device to host) *) <resource> is one of -) BUFFER: buffer required by PCM data stream -) STREAM: actual PCM data stream The subsystems call line6_pcm_acquire() to acquire the (shared) resources needed for a particular operation (e.g., allocate the buffer for ALSA playback or start the capture stream for software monitoring). When a resource is no longer needed, it is released by calling line6_pcm_release(). Buffer allocation and stream startup are handled separately to allow the ALSA kernel driver to perform them at appropriate places (since the callback which starts a PCM stream is not allowed to sleep). Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-20 07:09:09 +08:00
line6_pcm_acquire(line6pcm, LINE6_BITS_PCM_MONITOR);
else
staging: line6: separate handling of buffer allocation and stream startup There are several features of the Line6 USB driver which require PCM data to be exchanged with the device: *) PCM playback and capture via ALSA *) software monitoring (for devices without hardware monitoring) *) optional impulse response measurement However, from the device's point of view, there is just a single capture and playback stream, which must be shared between these subsystems. It is therefore necessary to maintain the state of the subsystems with respect to PCM usage. We define several constants of the form LINE6_BIT_PCM_<subsystem>_<direction>_<resource> with the following meanings: *) <subsystem> is one of -) ALSA: PCM playback and capture via ALSA -) MONITOR: software monitoring -) IMPULSE: optional impulse response measurement *) <direction> is one of -) PLAYBACK: audio output (from host to device) -) CAPTURE: audio input (from device to host) *) <resource> is one of -) BUFFER: buffer required by PCM data stream -) STREAM: actual PCM data stream The subsystems call line6_pcm_acquire() to acquire the (shared) resources needed for a particular operation (e.g., allocate the buffer for ALSA playback or start the capture stream for software monitoring). When a resource is no longer needed, it is released by calling line6_pcm_release(). Buffer allocation and stream startup are handled separately to allow the ALSA kernel driver to perform them at appropriate places (since the callback which starts a PCM stream is not allowed to sleep). Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-20 07:09:09 +08:00
line6_pcm_release(line6pcm, LINE6_BITS_PCM_MONITOR);
return 1;
}
/* source info callback */
static int snd_toneport_source_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
const int size = ARRAY_SIZE(toneport_source_info);
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = size;
if (uinfo->value.enumerated.item >= size)
uinfo->value.enumerated.item = size - 1;
strcpy(uinfo->value.enumerated.name,
toneport_source_info[uinfo->value.enumerated.item].name);
return 0;
}
/* source get callback */
static int snd_toneport_source_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
struct usb_line6_toneport *toneport =
(struct usb_line6_toneport *)line6pcm->line6;
ucontrol->value.enumerated.item[0] = toneport->source;
return 0;
}
/* source put callback */
static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
struct usb_line6_toneport *toneport =
(struct usb_line6_toneport *)line6pcm->line6;
unsigned int source;
source = ucontrol->value.enumerated.item[0];
if (source >= ARRAY_SIZE(toneport_source_info))
return -EINVAL;
if (source == toneport->source)
return 0;
toneport->source = source;
toneport_send_cmd(toneport->line6.usbdev,
toneport_source_info[source].code, 0x0000);
return 1;
}
static void toneport_start_pcm(unsigned long arg)
{
struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)arg;
struct usb_line6 *line6 = &toneport->line6;
staging: line6: separate handling of buffer allocation and stream startup There are several features of the Line6 USB driver which require PCM data to be exchanged with the device: *) PCM playback and capture via ALSA *) software monitoring (for devices without hardware monitoring) *) optional impulse response measurement However, from the device's point of view, there is just a single capture and playback stream, which must be shared between these subsystems. It is therefore necessary to maintain the state of the subsystems with respect to PCM usage. We define several constants of the form LINE6_BIT_PCM_<subsystem>_<direction>_<resource> with the following meanings: *) <subsystem> is one of -) ALSA: PCM playback and capture via ALSA -) MONITOR: software monitoring -) IMPULSE: optional impulse response measurement *) <direction> is one of -) PLAYBACK: audio output (from host to device) -) CAPTURE: audio input (from device to host) *) <resource> is one of -) BUFFER: buffer required by PCM data stream -) STREAM: actual PCM data stream The subsystems call line6_pcm_acquire() to acquire the (shared) resources needed for a particular operation (e.g., allocate the buffer for ALSA playback or start the capture stream for software monitoring). When a resource is no longer needed, it is released by calling line6_pcm_release(). Buffer allocation and stream startup are handled separately to allow the ALSA kernel driver to perform them at appropriate places (since the callback which starts a PCM stream is not allowed to sleep). Signed-off-by: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-20 07:09:09 +08:00
line6_pcm_acquire(line6->line6pcm, LINE6_BITS_PCM_MONITOR);
}
/* control definition */
static struct snd_kcontrol_new toneport_control_monitor = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Monitor Playback Volume",
.index = 0,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.info = snd_toneport_monitor_info,
.get = snd_toneport_monitor_get,
.put = snd_toneport_monitor_put
};
/* source selector definition */
static struct snd_kcontrol_new toneport_control_source = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "PCM Capture Source",
.index = 0,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
.info = snd_toneport_source_info,
.get = snd_toneport_source_get,
.put = snd_toneport_source_put
};
/*
Setup Toneport device.
*/
static void toneport_setup(struct usb_line6_toneport *toneport)
{
int ticks;
struct usb_line6 *line6 = &toneport->line6;
struct usb_device *usbdev = line6->usbdev;
/* sync time on device with host: */
ticks = (int)get_seconds();
line6_write_data(line6, 0x80c6, &ticks, 4);
/* enable device: */
toneport_send_cmd(usbdev, 0x0301, 0x0000);
/* initialize source select: */
switch (toneport->type) {
case LINE6_TONEPORT_UX1:
case LINE6_TONEPORT_UX2:
case LINE6_PODSTUDIO_UX1:
case LINE6_PODSTUDIO_UX2:
toneport_send_cmd(usbdev,
toneport_source_info[toneport->source].code,
0x0000);
default:
break;
}
if (toneport_has_led(toneport->type))
toneport_update_led(&usbdev->dev);
}
/*
Toneport device disconnected.
*/
static void line6_toneport_disconnect(struct usb_interface *interface)
{
struct usb_line6_toneport *toneport;
u16 idProduct;
if (interface == NULL)
return;
toneport = usb_get_intfdata(interface);
del_timer_sync(&toneport->timer);
idProduct = le16_to_cpu(toneport->line6.usbdev->descriptor.idProduct);
if (toneport_has_led(idProduct)) {
device_remove_file(&interface->dev, &dev_attr_led_red);
device_remove_file(&interface->dev, &dev_attr_led_green);
}
}
/*
Try to init Toneport device.
*/
static int toneport_init(struct usb_interface *interface,
struct usb_line6 *line6)
{
int err;
struct usb_line6_toneport *toneport = (struct usb_line6_toneport *) line6;
if ((interface == NULL) || (toneport == NULL))
return -ENODEV;
line6->disconnect = line6_toneport_disconnect;
/* initialize PCM subsystem: */
err = line6_init_pcm(line6, &toneport_pcm_properties);
if (err < 0)
return err;
/* register monitor control: */
err = snd_ctl_add(line6->card,
snd_ctl_new1(&toneport_control_monitor,
line6->line6pcm));
if (err < 0)
return err;
/* register source select control: */
switch (toneport->type) {
case LINE6_TONEPORT_UX1:
case LINE6_TONEPORT_UX2:
case LINE6_PODSTUDIO_UX1:
case LINE6_PODSTUDIO_UX2:
err =
snd_ctl_add(line6->card,
snd_ctl_new1(&toneport_control_source,
line6->line6pcm));
if (err < 0)
return err;
default:
break;
}
line6_read_serial_number(line6, &toneport->serial_number);
line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
if (toneport_has_led(toneport->type)) {
CHECK_RETURN(device_create_file
(&interface->dev, &dev_attr_led_red));
CHECK_RETURN(device_create_file
(&interface->dev, &dev_attr_led_green));
}
toneport_setup(toneport);
setup_timer(&toneport->timer, toneport_start_pcm,
(unsigned long)toneport);
mod_timer(&toneport->timer, jiffies + TONEPORT_PCM_DELAY * HZ);
/* register audio system: */
return snd_card_register(line6->card);
}
#ifdef CONFIG_PM
/*
Resume Toneport device after reset.
*/
static int toneport_reset_resume(struct usb_interface *interface)
{
toneport_setup(usb_get_intfdata(interface));
return line6_resume(interface);
}
#endif
#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
/* table of devices that work with this driver */
static const struct usb_device_id toneport_id_table[] = {
{ LINE6_DEVICE(0x4750), .driver_info = LINE6_GUITARPORT },
{ LINE6_DEVICE(0x4153), .driver_info = LINE6_PODSTUDIO_GX },
{ LINE6_DEVICE(0x4150), .driver_info = LINE6_PODSTUDIO_UX1 },
{ LINE6_IF_NUM(0x4151, 0), .driver_info = LINE6_PODSTUDIO_UX2 },
{ LINE6_DEVICE(0x4147), .driver_info = LINE6_TONEPORT_GX },
{ LINE6_DEVICE(0x4141), .driver_info = LINE6_TONEPORT_UX1 },
{ LINE6_IF_NUM(0x4142, 0), .driver_info = LINE6_TONEPORT_UX2 },
{}
};
MODULE_DEVICE_TABLE(usb, toneport_id_table);
static const struct line6_properties toneport_properties_table[] = {
[LINE6_GUITARPORT] = {
.id = "GuitarPort",
.name = "GuitarPort",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* 1..4 seem to be ok */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
[LINE6_PODSTUDIO_GX] = {
.id = "PODStudioGX",
.name = "POD Studio GX",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* 1..4 seem to be ok */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
[LINE6_PODSTUDIO_UX1] = {
.id = "PODStudioUX1",
.name = "POD Studio UX1",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* 1..4 seem to be ok */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
[LINE6_PODSTUDIO_UX2] = {
.id = "PODStudioUX2",
.name = "POD Studio UX2",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* defaults to 44.1kHz, 16-bit */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
[LINE6_TONEPORT_GX] = {
.id = "TonePortGX",
.name = "TonePort GX",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* 1..4 seem to be ok */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
[LINE6_TONEPORT_UX1] = {
.id = "TonePortUX1",
.name = "TonePort UX1",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* 1..4 seem to be ok */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
[LINE6_TONEPORT_UX2] = {
.id = "TonePortUX2",
.name = "TonePort UX2",
.capabilities = LINE6_CAP_PCM,
.altsetting = 2, /* defaults to 44.1kHz, 16-bit */
/* no control channel */
.ep_audio_r = 0x82,
.ep_audio_w = 0x01,
},
};
/*
Probe USB device.
*/
static int toneport_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_line6_toneport *toneport;
toneport = kzalloc(sizeof(*toneport), GFP_KERNEL);
if (!toneport)
return -ENODEV;
toneport->type = id->driver_info;
return line6_probe(interface, &toneport->line6,
&toneport_properties_table[id->driver_info],
toneport_init);
}
static struct usb_driver toneport_driver = {
.name = KBUILD_MODNAME,
.probe = toneport_probe,
.disconnect = line6_disconnect,
#ifdef CONFIG_PM
.suspend = line6_suspend,
.resume = line6_resume,
.reset_resume = toneport_reset_resume,
#endif
.id_table = toneport_id_table,
};
module_usb_driver(toneport_driver);
MODULE_DESCRIPTION("TonePort USB driver");
MODULE_LICENSE("GPL");