linux/drivers/firewire/core-device.c

1229 lines
32 KiB
C
Raw Normal View History

/*
* Device probing and sysfs code.
*
* Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
#include <linux/idr.h>
#include <linux/jiffies.h>
#include <linux/kobject.h>
#include <linux/list.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
#include <linux/semaphore.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/workqueue.h>
#include <asm/atomic.h>
#include <asm/byteorder.h>
#include <asm/system.h>
#include "core.h"
void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p)
{
ci->p = p + 1;
ci->end = ci->p + (p[0] >> 16);
}
EXPORT_SYMBOL(fw_csr_iterator_init);
int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value)
{
*key = *ci->p >> 24;
*value = *ci->p & 0xffffff;
return ci->p++ < ci->end;
}
EXPORT_SYMBOL(fw_csr_iterator_next);
static bool is_fw_unit(struct device *dev);
static int match_unit_directory(u32 *directory, u32 match_flags,
const struct ieee1394_device_id *id)
{
struct fw_csr_iterator ci;
int key, value, match;
match = 0;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (key == CSR_VENDOR && value == id->vendor_id)
match |= IEEE1394_MATCH_VENDOR_ID;
if (key == CSR_MODEL && value == id->model_id)
match |= IEEE1394_MATCH_MODEL_ID;
if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
match |= IEEE1394_MATCH_SPECIFIER_ID;
if (key == CSR_VERSION && value == id->version)
match |= IEEE1394_MATCH_VERSION;
}
return (match & match_flags) == match_flags;
}
static int fw_unit_match(struct device *dev, struct device_driver *drv)
{
struct fw_unit *unit = fw_unit(dev);
struct fw_device *device;
const struct ieee1394_device_id *id;
/* We only allow binding to fw_units. */
if (!is_fw_unit(dev))
return 0;
device = fw_parent_device(unit);
id = container_of(drv, struct fw_driver, driver)->id_table;
for (; id->match_flags != 0; id++) {
if (match_unit_directory(unit->directory, id->match_flags, id))
return 1;
/* Also check vendor ID in the root directory. */
if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) &&
match_unit_directory(&device->config_rom[5],
IEEE1394_MATCH_VENDOR_ID, id) &&
match_unit_directory(unit->directory, id->match_flags
& ~IEEE1394_MATCH_VENDOR_ID, id))
return 1;
}
return 0;
}
static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
{
struct fw_device *device = fw_parent_device(unit);
struct fw_csr_iterator ci;
int key, value;
int vendor = 0;
int model = 0;
int specifier_id = 0;
int version = 0;
fw_csr_iterator_init(&ci, &device->config_rom[5]);
while (fw_csr_iterator_next(&ci, &key, &value)) {
switch (key) {
case CSR_VENDOR:
vendor = value;
break;
case CSR_MODEL:
model = value;
break;
}
}
fw_csr_iterator_init(&ci, unit->directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
switch (key) {
case CSR_SPECIFIER_ID:
specifier_id = value;
break;
case CSR_VERSION:
version = value;
break;
}
}
return snprintf(buffer, buffer_size,
"ieee1394:ven%08Xmo%08Xsp%08Xver%08X",
vendor, model, specifier_id, version);
}
static int fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct fw_unit *unit = fw_unit(dev);
char modalias[64];
get_modalias(unit, modalias, sizeof(modalias));
if (add_uevent_var(env, "MODALIAS=%s", modalias))
return -ENOMEM;
return 0;
}
struct bus_type fw_bus_type = {
.name = "firewire",
.match = fw_unit_match,
};
EXPORT_SYMBOL(fw_bus_type);
int fw_device_enable_phys_dma(struct fw_device *device)
{
int generation = device->generation;
/* device->node_id, accessed below, must not be older than generation */
smp_rmb();
return device->card->driver->enable_phys_dma(device->card,
device->node_id,
generation);
}
EXPORT_SYMBOL(fw_device_enable_phys_dma);
struct config_rom_attribute {
struct device_attribute attr;
u32 key;
};
static ssize_t show_immediate(struct device *dev,
struct device_attribute *dattr, char *buf)
{
struct config_rom_attribute *attr =
container_of(dattr, struct config_rom_attribute, attr);
struct fw_csr_iterator ci;
u32 *dir;
int key, value, ret = -ENOENT;
down_read(&fw_device_rwsem);
if (is_fw_unit(dev))
dir = fw_unit(dev)->directory;
else
dir = fw_device(dev)->config_rom + 5;
fw_csr_iterator_init(&ci, dir);
while (fw_csr_iterator_next(&ci, &key, &value))
if (attr->key == key) {
ret = snprintf(buf, buf ? PAGE_SIZE : 0,
"0x%06x\n", value);
break;
}
up_read(&fw_device_rwsem);
return ret;
}
#define IMMEDIATE_ATTR(name, key) \
{ __ATTR(name, S_IRUGO, show_immediate, NULL), key }
static ssize_t show_text_leaf(struct device *dev,
struct device_attribute *dattr, char *buf)
{
struct config_rom_attribute *attr =
container_of(dattr, struct config_rom_attribute, attr);
struct fw_csr_iterator ci;
u32 *dir, *block = NULL, *p, *end;
int length, key, value, last_key = 0, ret = -ENOENT;
char *b;
down_read(&fw_device_rwsem);
if (is_fw_unit(dev))
dir = fw_unit(dev)->directory;
else
dir = fw_device(dev)->config_rom + 5;
fw_csr_iterator_init(&ci, dir);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (attr->key == last_key &&
key == (CSR_DESCRIPTOR | CSR_LEAF))
block = ci.p - 1 + value;
last_key = key;
}
if (block == NULL)
goto out;
length = min(block[0] >> 16, 256U);
if (length < 3)
goto out;
if (block[1] != 0 || block[2] != 0)
/* Unknown encoding. */
goto out;
if (buf == NULL) {
ret = length * 4;
goto out;
}
b = buf;
end = &block[length + 1];
for (p = &block[3]; p < end; p++, b += 4)
* (u32 *) b = (__force u32) __cpu_to_be32(*p);
/* Strip trailing whitespace and add newline. */
while (b--, (isspace(*b) || *b == '\0') && b > buf);
strcpy(b + 1, "\n");
ret = b + 2 - buf;
out:
up_read(&fw_device_rwsem);
return ret;
}
#define TEXT_LEAF_ATTR(name, key) \
{ __ATTR(name, S_IRUGO, show_text_leaf, NULL), key }
static struct config_rom_attribute config_rom_attributes[] = {
IMMEDIATE_ATTR(vendor, CSR_VENDOR),
IMMEDIATE_ATTR(hardware_version, CSR_HARDWARE_VERSION),
IMMEDIATE_ATTR(specifier_id, CSR_SPECIFIER_ID),
IMMEDIATE_ATTR(version, CSR_VERSION),
IMMEDIATE_ATTR(model, CSR_MODEL),
TEXT_LEAF_ATTR(vendor_name, CSR_VENDOR),
TEXT_LEAF_ATTR(model_name, CSR_MODEL),
TEXT_LEAF_ATTR(hardware_version_name, CSR_HARDWARE_VERSION),
};
static void init_fw_attribute_group(struct device *dev,
struct device_attribute *attrs,
struct fw_attribute_group *group)
{
struct device_attribute *attr;
int i, j;
for (j = 0; attrs[j].attr.name != NULL; j++)
group->attrs[j] = &attrs[j].attr;
for (i = 0; i < ARRAY_SIZE(config_rom_attributes); i++) {
attr = &config_rom_attributes[i].attr;
if (attr->show(dev, attr, NULL) < 0)
continue;
group->attrs[j++] = &attr->attr;
}
group->attrs[j] = NULL;
group->groups[0] = &group->group;
group->groups[1] = NULL;
group->group.attrs = group->attrs;
dev->groups = (const struct attribute_group **) group->groups;
}
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_unit *unit = fw_unit(dev);
int length;
length = get_modalias(unit, buf, PAGE_SIZE);
strcpy(buf + length, "\n");
return length + 1;
}
static ssize_t rom_index_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev->parent);
struct fw_unit *unit = fw_unit(dev);
return snprintf(buf, PAGE_SIZE, "%d\n",
(int)(unit->directory - device->config_rom));
}
static struct device_attribute fw_unit_attributes[] = {
__ATTR_RO(modalias),
__ATTR_RO(rom_index),
__ATTR_NULL,
};
static ssize_t config_rom_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev);
size_t length;
down_read(&fw_device_rwsem);
length = device->config_rom_length * 4;
memcpy(buf, device->config_rom, length);
up_read(&fw_device_rwsem);
return length;
}
static ssize_t guid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev);
int ret;
down_read(&fw_device_rwsem);
ret = snprintf(buf, PAGE_SIZE, "0x%08x%08x\n",
device->config_rom[3], device->config_rom[4]);
up_read(&fw_device_rwsem);
return ret;
}
firewire: core: add sysfs attribute for easier udev rules This adds the attribute /sys/bus/firewire/devices/fw[0-9]+/units. It can be used in udev rules like the following ones: # IIDC devices: industrial cameras and some webcams SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010?*", GROUP="video" # AV/C devices: camcorders, set-top boxes, TV sets, audio devices, ... SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video" Background: firewire-core manages two device types: - fw_device is a FireWire node. A character device file is associated with it. - fw_unit is a unit directory on a node. Each fw_device may have 0..n children of type fw_unit. The units tell us what kinds of protocols a node implements. We want to set ownership or ACLs or permissions of the character device file of an fw_device, or/and create symlinks to it, based on available protocols. Until now udev rules had to look at the fw_unit devices and then modify their parent's character device file accordingly. This is problematic for two reasons: 1) It happens sometime after the creation of the fw_device, 2) an access policy may require that information from all children is evaluated before a decision about the parent is made. Problem 1) can ultimately not be avoided since this is the nature of FireWire nodes: They may add or remove unit directories at any point in time. However, we can still help userland a lot by providing the protocol type information of all units in a summary sysfs attribute directly at the fw_device. This way, - the information is immediately available at the affected device when userspace goes about to handle an ADD or CHANGE event of the fw_device, - with most policies, it won't be necessary anymore to dig through child attributes. The new attribute is called "units". It contains space-separated tuples of specifier_id and version of each present unit. The delimiter within tuples is a colon. Specifier_id and version are printed as 0x%06x. Here is an example of a node which implements an IPv4 unit and an IPv6 unit: $ cat /sys/bus/firewire/devices/fw2/units 0x00005e:0x000001 0x00005e:0x000002 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-05-23 06:03:29 +08:00
static int units_sprintf(char *buf, u32 *directory)
{
struct fw_csr_iterator ci;
int key, value;
int specifier_id = 0;
int version = 0;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
switch (key) {
case CSR_SPECIFIER_ID:
specifier_id = value;
break;
case CSR_VERSION:
version = value;
break;
}
}
return sprintf(buf, "0x%06x:0x%06x ", specifier_id, version);
}
static ssize_t units_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fw_device *device = fw_device(dev);
struct fw_csr_iterator ci;
int key, value, i = 0;
down_read(&fw_device_rwsem);
fw_csr_iterator_init(&ci, &device->config_rom[5]);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (key != (CSR_UNIT | CSR_DIRECTORY))
continue;
i += units_sprintf(&buf[i], ci.p + value - 1);
if (i >= PAGE_SIZE - (8 + 1 + 8 + 1))
break;
}
up_read(&fw_device_rwsem);
if (i)
buf[i - 1] = '\n';
return i;
}
static struct device_attribute fw_device_attributes[] = {
__ATTR_RO(config_rom),
__ATTR_RO(guid),
firewire: core: add sysfs attribute for easier udev rules This adds the attribute /sys/bus/firewire/devices/fw[0-9]+/units. It can be used in udev rules like the following ones: # IIDC devices: industrial cameras and some webcams SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010?*", GROUP="video" # AV/C devices: camcorders, set-top boxes, TV sets, audio devices, ... SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video" Background: firewire-core manages two device types: - fw_device is a FireWire node. A character device file is associated with it. - fw_unit is a unit directory on a node. Each fw_device may have 0..n children of type fw_unit. The units tell us what kinds of protocols a node implements. We want to set ownership or ACLs or permissions of the character device file of an fw_device, or/and create symlinks to it, based on available protocols. Until now udev rules had to look at the fw_unit devices and then modify their parent's character device file accordingly. This is problematic for two reasons: 1) It happens sometime after the creation of the fw_device, 2) an access policy may require that information from all children is evaluated before a decision about the parent is made. Problem 1) can ultimately not be avoided since this is the nature of FireWire nodes: They may add or remove unit directories at any point in time. However, we can still help userland a lot by providing the protocol type information of all units in a summary sysfs attribute directly at the fw_device. This way, - the information is immediately available at the affected device when userspace goes about to handle an ADD or CHANGE event of the fw_device, - with most policies, it won't be necessary anymore to dig through child attributes. The new attribute is called "units". It contains space-separated tuples of specifier_id and version of each present unit. The delimiter within tuples is a colon. Specifier_id and version are printed as 0x%06x. Here is an example of a node which implements an IPv4 unit and an IPv6 unit: $ cat /sys/bus/firewire/devices/fw2/units 0x00005e:0x000001 0x00005e:0x000002 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-05-23 06:03:29 +08:00
__ATTR_RO(units),
__ATTR_NULL,
};
static int read_rom(struct fw_device *device,
int generation, int index, u32 *data)
{
int rcode;
/* device->node_id, accessed below, must not be older than generation */
smp_rmb();
rcode = fw_run_transaction(device->card, TCODE_READ_QUADLET_REQUEST,
device->node_id, generation, device->max_speed,
(CSR_REGISTER_BASE | CSR_CONFIG_ROM) + index * 4,
data, 4);
be32_to_cpus(data);
return rcode;
}
#define READ_BIB_ROM_SIZE 256
#define READ_BIB_STACK_SIZE 16
/*
* Read the bus info block, perform a speed probe, and read all of the rest of
* the config ROM. We do all this with a cached bus generation. If the bus
* generation changes under us, read_bus_info_block will fail and get retried.
* It's better to start all over in this case because the node from which we
* are reading the ROM may have changed the ROM during the reset.
*/
static int read_bus_info_block(struct fw_device *device, int generation)
{
u32 *rom, *stack, *old_rom, *new_rom;
u32 sp, key;
int i, end, length, ret = -1;
rom = kmalloc(sizeof(*rom) * READ_BIB_ROM_SIZE +
sizeof(*stack) * READ_BIB_STACK_SIZE, GFP_KERNEL);
if (rom == NULL)
return -ENOMEM;
stack = &rom[READ_BIB_ROM_SIZE];
device->max_speed = SCODE_100;
/* First read the bus info block. */
for (i = 0; i < 5; i++) {
if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE)
goto out;
/*
* As per IEEE1212 7.2, during power-up, devices can
* reply with a 0 for the first quadlet of the config
* rom to indicate that they are booting (for example,
* if the firmware is on the disk of a external
* harddisk). In that case we just fail, and the
* retry mechanism will try again later.
*/
if (i == 0 && rom[i] == 0)
goto out;
}
device->max_speed = device->node->max_speed;
/*
* Determine the speed of
* - devices with link speed less than PHY speed,
* - devices with 1394b PHY (unless only connected to 1394a PHYs),
* - all devices if there are 1394b repeaters.
* Note, we cannot use the bus info block's link_spd as starting point
* because some buggy firmwares set it lower than necessary and because
* 1394-1995 nodes do not have the field.
*/
if ((rom[2] & 0x7) < device->max_speed ||
device->max_speed == SCODE_BETA ||
device->card->beta_repeaters_present) {
u32 dummy;
/* for S1600 and S3200 */
if (device->max_speed == SCODE_BETA)
device->max_speed = device->card->link_speed;
while (device->max_speed > SCODE_100) {
if (read_rom(device, generation, 0, &dummy) ==
RCODE_COMPLETE)
break;
device->max_speed--;
}
}
/*
* Now parse the config rom. The config rom is a recursive
* directory structure so we parse it using a stack of
* references to the blocks that make up the structure. We
* push a reference to the root directory on the stack to
* start things off.
*/
length = i;
sp = 0;
stack[sp++] = 0xc0000005;
while (sp > 0) {
/*
* Pop the next block reference of the stack. The
* lower 24 bits is the offset into the config rom,
* the upper 8 bits are the type of the reference the
* block.
*/
key = stack[--sp];
i = key & 0xffffff;
if (i >= READ_BIB_ROM_SIZE)
/*
* The reference points outside the standard
* config rom area, something's fishy.
*/
goto out;
/* Read header quadlet for the block to get the length. */
if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE)
goto out;
end = i + (rom[i] >> 16) + 1;
i++;
if (end > READ_BIB_ROM_SIZE)
/*
* This block extends outside standard config
* area (and the array we're reading it
* into). That's broken, so ignore this
* device.
*/
goto out;
/*
* Now read in the block. If this is a directory
* block, check the entries as we read them to see if
* it references another block, and push it in that case.
*/
while (i < end) {
if (read_rom(device, generation, i, &rom[i]) !=
RCODE_COMPLETE)
goto out;
if ((key >> 30) == 3 && (rom[i] >> 30) > 1 &&
sp < READ_BIB_STACK_SIZE)
stack[sp++] = i + rom[i];
i++;
}
if (length < i)
length = i;
}
old_rom = device->config_rom;
new_rom = kmemdup(rom, length * 4, GFP_KERNEL);
if (new_rom == NULL)
goto out;
down_write(&fw_device_rwsem);
device->config_rom = new_rom;
device->config_rom_length = length;
up_write(&fw_device_rwsem);
kfree(old_rom);
ret = 0;
device->max_rec = rom[2] >> 12 & 0xf;
device->cmc = rom[2] >> 30 & 1;
device->irmc = rom[2] >> 31 & 1;
out:
kfree(rom);
return ret;
}
static void fw_unit_release(struct device *dev)
{
struct fw_unit *unit = fw_unit(dev);
kfree(unit);
}
static struct device_type fw_unit_type = {
.uevent = fw_unit_uevent,
.release = fw_unit_release,
};
static bool is_fw_unit(struct device *dev)
{
return dev->type == &fw_unit_type;
}
static void create_units(struct fw_device *device)
{
struct fw_csr_iterator ci;
struct fw_unit *unit;
int key, value, i;
i = 0;
fw_csr_iterator_init(&ci, &device->config_rom[5]);
while (fw_csr_iterator_next(&ci, &key, &value)) {
if (key != (CSR_UNIT | CSR_DIRECTORY))
continue;
/*
* Get the address of the unit directory and try to
* match the drivers id_tables against it.
*/
unit = kzalloc(sizeof(*unit), GFP_KERNEL);
if (unit == NULL) {
fw_error("failed to allocate memory for unit\n");
continue;
}
unit->directory = ci.p + value - 1;
unit->device.bus = &fw_bus_type;
unit->device.type = &fw_unit_type;
unit->device.parent = &device->device;
dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
BUILD_BUG_ON(ARRAY_SIZE(unit->attribute_group.attrs) <
ARRAY_SIZE(fw_unit_attributes) +
ARRAY_SIZE(config_rom_attributes));
init_fw_attribute_group(&unit->device,
fw_unit_attributes,
&unit->attribute_group);
if (device_register(&unit->device) < 0)
goto skip_unit;
continue;
skip_unit:
kfree(unit);
}
}
static int shutdown_unit(struct device *device, void *data)
{
device_unregister(device);
return 0;
}
/*
* fw_device_rwsem acts as dual purpose mutex:
* - serializes accesses to fw_device_idr,
* - serializes accesses to fw_device.config_rom/.config_rom_length and
* fw_unit.directory, unless those accesses happen at safe occasions
*/
DECLARE_RWSEM(fw_device_rwsem);
DEFINE_IDR(fw_device_idr);
int fw_cdev_major;
struct fw_device *fw_device_get_by_devt(dev_t devt)
{
struct fw_device *device;
down_read(&fw_device_rwsem);
device = idr_find(&fw_device_idr, MINOR(devt));
if (device)
fw_device_get(device);
up_read(&fw_device_rwsem);
return device;
}
/*
* These defines control the retry behavior for reading the config
* rom. It shouldn't be necessary to tweak these; if the device
* doesn't respond to a config rom read within 10 seconds, it's not
* going to respond at all. As for the initial delay, a lot of
* devices will be able to respond within half a second after bus
* reset. On the other hand, it's not really worth being more
* aggressive than that, since it scales pretty well; if 10 devices
* are plugged in, they're all getting read within one second.
*/
#define MAX_RETRIES 10
#define RETRY_DELAY (3 * HZ)
#define INITIAL_DELAY (HZ / 2)
#define SHUTDOWN_DELAY (2 * HZ)
static void fw_device_shutdown(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
int minor = MINOR(device->device.devt);
if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
&& !list_empty(&device->card->link)) {
schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
return;
}
if (atomic_cmpxchg(&device->state,
FW_DEVICE_GONE,
FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
return;
fw_device_cdev_remove(device);
device_for_each_child(&device->device, NULL, shutdown_unit);
device_unregister(&device->device);
down_write(&fw_device_rwsem);
idr_remove(&fw_device_idr, minor);
up_write(&fw_device_rwsem);
fw_device_put(device);
}
static void fw_device_release(struct device *dev)
{
struct fw_device *device = fw_device(dev);
struct fw_card *card = device->card;
unsigned long flags;
/*
* Take the card lock so we don't set this to NULL while a
* FW_NODE_UPDATED callback is being handled or while the
* bus manager work looks at this node.
*/
spin_lock_irqsave(&card->lock, flags);
device->node->data = NULL;
spin_unlock_irqrestore(&card->lock, flags);
fw_node_put(device->node);
kfree(device->config_rom);
kfree(device);
fw_card_put(card);
}
static struct device_type fw_device_type = {
.release = fw_device_release,
};
static bool is_fw_device(struct device *dev)
{
return dev->type == &fw_device_type;
}
static int update_unit(struct device *dev, void *data)
{
struct fw_unit *unit = fw_unit(dev);
struct fw_driver *driver = (struct fw_driver *)dev->driver;
if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
down(&dev->sem);
driver->update(unit);
up(&dev->sem);
}
return 0;
}
static void fw_device_update(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
fw_device_cdev_update(device);
device_for_each_child(&device->device, NULL, update_unit);
}
/*
* If a device was pending for deletion because its node went away but its
* bus info block and root directory header matches that of a newly discovered
* device, revive the existing fw_device.
* The newly allocated fw_device becomes obsolete instead.
*/
static int lookup_existing_device(struct device *dev, void *data)
{
struct fw_device *old = fw_device(dev);
struct fw_device *new = data;
struct fw_card *card = new->card;
int match = 0;
if (!is_fw_device(dev))
return 0;
down_read(&fw_device_rwsem); /* serialize config_rom access */
spin_lock_irq(&card->lock); /* serialize node access */
if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
atomic_cmpxchg(&old->state,
FW_DEVICE_GONE,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
struct fw_node *current_node = new->node;
struct fw_node *obsolete_node = old->node;
new->node = obsolete_node;
new->node->data = new;
old->node = current_node;
old->node->data = old;
old->max_speed = new->max_speed;
old->node_id = current_node->node_id;
smp_wmb(); /* update node_id before generation */
old->generation = card->generation;
old->config_rom_retries = 0;
fw_notify("rediscovered device %s\n", dev_name(dev));
PREPARE_DELAYED_WORK(&old->work, fw_device_update);
schedule_delayed_work(&old->work, 0);
if (current_node == card->root_node)
fw_schedule_bm_work(card, 0);
match = 1;
}
spin_unlock_irq(&card->lock);
up_read(&fw_device_rwsem);
return match;
}
enum { BC_UNKNOWN = 0, BC_UNIMPLEMENTED, BC_IMPLEMENTED, };
static void set_broadcast_channel(struct fw_device *device, int generation)
{
struct fw_card *card = device->card;
__be32 data;
int rcode;
if (!card->broadcast_channel_allocated)
return;
/*
* The Broadcast_Channel Valid bit is required by nodes which want to
* transmit on this channel. Such transmissions are practically
* exclusive to IP over 1394 (RFC 2734). IP capable nodes are required
* to be IRM capable and have a max_rec of 8 or more. We use this fact
* to narrow down to which nodes we send Broadcast_Channel updates.
*/
if (!device->irmc || device->max_rec < 8)
return;
/*
* Some 1394-1995 nodes crash if this 1394a-2000 register is written.
* Perform a read test first.
*/
if (device->bc_implemented == BC_UNKNOWN) {
rcode = fw_run_transaction(card, TCODE_READ_QUADLET_REQUEST,
device->node_id, generation, device->max_speed,
CSR_REGISTER_BASE + CSR_BROADCAST_CHANNEL,
&data, 4);
switch (rcode) {
case RCODE_COMPLETE:
if (data & cpu_to_be32(1 << 31)) {
device->bc_implemented = BC_IMPLEMENTED;
break;
}
/* else fall through to case address error */
case RCODE_ADDRESS_ERROR:
device->bc_implemented = BC_UNIMPLEMENTED;
}
}
if (device->bc_implemented == BC_IMPLEMENTED) {
data = cpu_to_be32(BROADCAST_CHANNEL_INITIAL |
BROADCAST_CHANNEL_VALID);
fw_run_transaction(card, TCODE_WRITE_QUADLET_REQUEST,
device->node_id, generation, device->max_speed,
CSR_REGISTER_BASE + CSR_BROADCAST_CHANNEL,
&data, 4);
}
}
int fw_device_set_broadcast_channel(struct device *dev, void *gen)
{
if (is_fw_device(dev))
set_broadcast_channel(fw_device(dev), (long)gen);
return 0;
}
static void fw_device_init(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
struct device *revived_dev;
int minor, ret;
/*
* All failure paths here set node->data to NULL, so that we
* don't try to do device_for_each_child() on a kfree()'d
* device.
*/
if (read_bus_info_block(device, device->generation) < 0) {
firewire: fix crash in automatic module unloading "modprobe firewire-ohci; sleep .1; modprobe -r firewire-ohci" used to result in crashes like this: BUG: unable to handle kernel paging request at ffffffff8807b455 IP: [<ffffffff8807b455>] PGD 203067 PUD 207063 PMD 7c170067 PTE 0 Oops: 0010 [1] PREEMPT SMP CPU 0 Modules linked in: i915 drm cpufreq_ondemand acpi_cpufreq freq_table applesmc input_polldev led_class coretemp hwmon eeprom snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss button thermal processor sg snd_hda_intel snd_pcm snd_timer snd snd_page_alloc sky2 i2c_i801 rtc [last unloaded: crc_itu_t] Pid: 9, comm: events/0 Not tainted 2.6.25-rc2 #3 RIP: 0010:[<ffffffff8807b455>] [<ffffffff8807b455>] RSP: 0018:ffff81007dcdde88 EFLAGS: 00010246 RAX: ffff81007dc95040 RBX: ffff81007dee5390 RCX: 0000000000005e13 RDX: 0000000000008c8b RSI: 0000000000000001 RDI: ffff81007dee5388 RBP: ffff81007dc5eb40 R08: 0000000000000002 R09: ffffffff8022d05c R10: ffffffff8023b34c R11: ffffffff8041a353 R12: ffff81007dee5388 R13: ffffffff8807b455 R14: ffffffff80593bc0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff8055a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffffff8807b455 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/0 (pid: 9, threadinfo ffff81007dcdc000, task ffff81007dc95040) Stack: ffffffff8023b396 ffffffff88082524 0000000000000000 ffffffff8807d9ae ffff81007dc5eb40 ffff81007dc9dce0 ffff81007dc5eb40 ffff81007dc5eb80 ffff81007dc9dce0 ffffffffffffffff ffffffff8023be87 0000000000000000 Call Trace: [<ffffffff8023b396>] ? run_workqueue+0xdf/0x1df [<ffffffff8023be87>] ? worker_thread+0xd8/0xe3 [<ffffffff8023e917>] ? autoremove_wake_function+0x0/0x2e [<ffffffff8023bdaf>] ? worker_thread+0x0/0xe3 [<ffffffff8023e813>] ? kthread+0x47/0x74 [<ffffffff804198e0>] ? trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8020c008>] ? child_rip+0xa/0x12 [<ffffffff8020b6e3>] ? restore_args+0x0/0x3d [<ffffffff8023e68a>] ? kthreadd+0x14c/0x171 [<ffffffff8023e68a>] ? kthreadd+0x14c/0x171 [<ffffffff8023e7cc>] ? kthread+0x0/0x74 [<ffffffff8020bffe>] ? child_rip+0x0/0x12 Code: Bad RIP value. RIP [<ffffffff8807b455>] RSP <ffff81007dcdde88> CR2: ffffffff8807b455 ---[ end trace c7366c6657fe5bed ]--- Note that this crash happened _after_ firewire-core was unloaded. The shared workqueue tried to run firewire-core's device initialization jobs or similar jobs. The fix makes sure that firewire-ohci and hence firewire-core is not unloaded before all device shutdown jobs have been completed. This is determined by the count of device initializations minus device releases. Also skip useless retries in the node initialization job if the node is to be shut down. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-02-28 05:14:27 +08:00
if (device->config_rom_retries < MAX_RETRIES &&
atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
schedule_delayed_work(&device->work, RETRY_DELAY);
} else {
fw_notify("giving up on config rom for node id %x\n",
device->node_id);
if (device->node == device->card->root_node)
fw_schedule_bm_work(device->card, 0);
fw_device_release(&device->device);
}
return;
}
revived_dev = device_find_child(device->card->device,
device, lookup_existing_device);
if (revived_dev) {
put_device(revived_dev);
fw_device_release(&device->device);
return;
}
device_initialize(&device->device);
fw_device_get(device);
down_write(&fw_device_rwsem);
ret = idr_pre_get(&fw_device_idr, GFP_KERNEL) ?
idr_get_new(&fw_device_idr, device, &minor) :
-ENOMEM;
up_write(&fw_device_rwsem);
if (ret < 0)
goto error;
device->device.bus = &fw_bus_type;
device->device.type = &fw_device_type;
device->device.parent = device->card->device;
device->device.devt = MKDEV(fw_cdev_major, minor);
dev_set_name(&device->device, "fw%d", minor);
BUILD_BUG_ON(ARRAY_SIZE(device->attribute_group.attrs) <
ARRAY_SIZE(fw_device_attributes) +
ARRAY_SIZE(config_rom_attributes));
init_fw_attribute_group(&device->device,
fw_device_attributes,
&device->attribute_group);
if (device_add(&device->device)) {
fw_error("Failed to add device.\n");
goto error_with_cdev;
}
create_units(device);
/*
* Transition the device to running state. If it got pulled
* out from under us while we did the intialization work, we
* have to shut down the device again here. Normally, though,
* fw_node_event will be responsible for shutting it down when
* necessary. We have to use the atomic cmpxchg here to avoid
* racing with the FW_NODE_DESTROYED case in
* fw_node_event().
*/
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
} else {
if (device->config_rom_retries)
fw_notify("created device %s: GUID %08x%08x, S%d00, "
"%d config ROM retries\n",
dev_name(&device->device),
device->config_rom[3], device->config_rom[4],
1 << device->max_speed,
device->config_rom_retries);
else
fw_notify("created device %s: GUID %08x%08x, S%d00\n",
dev_name(&device->device),
device->config_rom[3], device->config_rom[4],
1 << device->max_speed);
device->config_rom_retries = 0;
set_broadcast_channel(device, device->generation);
}
/*
* Reschedule the IRM work if we just finished reading the
* root node config rom. If this races with a bus reset we
* just end up running the IRM work a couple of extra times -
* pretty harmless.
*/
if (device->node == device->card->root_node)
fw_schedule_bm_work(device->card, 0);
return;
error_with_cdev:
down_write(&fw_device_rwsem);
idr_remove(&fw_device_idr, minor);
up_write(&fw_device_rwsem);
error:
fw_device_put(device); /* fw_device_idr's reference */
put_device(&device->device); /* our reference */
}
enum {
REREAD_BIB_ERROR,
REREAD_BIB_GONE,
REREAD_BIB_UNCHANGED,
REREAD_BIB_CHANGED,
};
/* Reread and compare bus info block and header of root directory */
static int reread_bus_info_block(struct fw_device *device, int generation)
{
u32 q;
int i;
for (i = 0; i < 6; i++) {
if (read_rom(device, generation, i, &q) != RCODE_COMPLETE)
return REREAD_BIB_ERROR;
if (i == 0 && q == 0)
return REREAD_BIB_GONE;
if (q != device->config_rom[i])
return REREAD_BIB_CHANGED;
}
return REREAD_BIB_UNCHANGED;
}
static void fw_device_refresh(struct work_struct *work)
{
struct fw_device *device =
container_of(work, struct fw_device, work.work);
struct fw_card *card = device->card;
int node_id = device->node_id;
switch (reread_bus_info_block(device, device->generation)) {
case REREAD_BIB_ERROR:
if (device->config_rom_retries < MAX_RETRIES / 2 &&
atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
schedule_delayed_work(&device->work, RETRY_DELAY / 2);
return;
}
goto give_up;
case REREAD_BIB_GONE:
goto gone;
case REREAD_BIB_UNCHANGED:
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
goto gone;
fw_device_update(work);
device->config_rom_retries = 0;
goto out;
case REREAD_BIB_CHANGED:
break;
}
/*
* Something changed. We keep things simple and don't investigate
* further. We just destroy all previous units and create new ones.
*/
device_for_each_child(&device->device, NULL, shutdown_unit);
if (read_bus_info_block(device, device->generation) < 0) {
if (device->config_rom_retries < MAX_RETRIES &&
atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
device->config_rom_retries++;
schedule_delayed_work(&device->work, RETRY_DELAY);
return;
}
goto give_up;
}
create_units(device);
firewire: core: add sysfs attribute for easier udev rules This adds the attribute /sys/bus/firewire/devices/fw[0-9]+/units. It can be used in udev rules like the following ones: # IIDC devices: industrial cameras and some webcams SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010?*", GROUP="video" # AV/C devices: camcorders, set-top boxes, TV sets, audio devices, ... SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video" Background: firewire-core manages two device types: - fw_device is a FireWire node. A character device file is associated with it. - fw_unit is a unit directory on a node. Each fw_device may have 0..n children of type fw_unit. The units tell us what kinds of protocols a node implements. We want to set ownership or ACLs or permissions of the character device file of an fw_device, or/and create symlinks to it, based on available protocols. Until now udev rules had to look at the fw_unit devices and then modify their parent's character device file accordingly. This is problematic for two reasons: 1) It happens sometime after the creation of the fw_device, 2) an access policy may require that information from all children is evaluated before a decision about the parent is made. Problem 1) can ultimately not be avoided since this is the nature of FireWire nodes: They may add or remove unit directories at any point in time. However, we can still help userland a lot by providing the protocol type information of all units in a summary sysfs attribute directly at the fw_device. This way, - the information is immediately available at the affected device when userspace goes about to handle an ADD or CHANGE event of the fw_device, - with most policies, it won't be necessary anymore to dig through child attributes. The new attribute is called "units". It contains space-separated tuples of specifier_id and version of each present unit. The delimiter within tuples is a colon. Specifier_id and version are printed as 0x%06x. Here is an example of a node which implements an IPv4 unit and an IPv6 unit: $ cat /sys/bus/firewire/devices/fw2/units 0x00005e:0x000001 0x00005e:0x000002 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-05-23 06:03:29 +08:00
/* Userspace may want to re-read attributes. */
kobject_uevent(&device->device.kobj, KOBJ_CHANGE);
if (atomic_cmpxchg(&device->state,
FW_DEVICE_INITIALIZING,
FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
goto gone;
fw_notify("refreshed device %s\n", dev_name(&device->device));
device->config_rom_retries = 0;
goto out;
give_up:
fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
gone:
atomic_set(&device->state, FW_DEVICE_GONE);
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
out:
if (node_id == card->root_node->node_id)
fw_schedule_bm_work(card, 0);
}
void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
{
struct fw_device *device;
switch (event) {
case FW_NODE_CREATED:
case FW_NODE_LINK_ON:
if (!node->link_on)
break;
create:
device = kzalloc(sizeof(*device), GFP_ATOMIC);
if (device == NULL)
break;
/*
* Do minimal intialization of the device here, the
* rest will happen in fw_device_init().
*
* Attention: A lot of things, even fw_device_get(),
* cannot be done before fw_device_init() finished!
* You can basically just check device->state and
* schedule work until then, but only while holding
* card->lock.
*/
atomic_set(&device->state, FW_DEVICE_INITIALIZING);
device->card = fw_card_get(card);
device->node = fw_node_get(node);
device->node_id = node->node_id;
device->generation = card->generation;
device->is_local = node == card->local_node;
mutex_init(&device->client_list_mutex);
INIT_LIST_HEAD(&device->client_list);
/*
* Set the node data to point back to this device so
* FW_NODE_UPDATED callbacks can update the node_id
* and generation for the device.
*/
node->data = device;
/*
* Many devices are slow to respond after bus resets,
* especially if they are bus powered and go through
* power-up after getting plugged in. We schedule the
* first config rom scan half a second after bus reset.
*/
INIT_DELAYED_WORK(&device->work, fw_device_init);
schedule_delayed_work(&device->work, INITIAL_DELAY);
break;
case FW_NODE_INITIATED_RESET:
device = node->data;
if (device == NULL)
goto create;
device->node_id = node->node_id;
smp_wmb(); /* update node_id before generation */
device->generation = card->generation;
if (atomic_cmpxchg(&device->state,
FW_DEVICE_RUNNING,
FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
schedule_delayed_work(&device->work,
device->is_local ? 0 : INITIAL_DELAY);
}
break;
case FW_NODE_UPDATED:
if (!node->link_on || node->data == NULL)
break;
device = node->data;
device->node_id = node->node_id;
smp_wmb(); /* update node_id before generation */
device->generation = card->generation;
if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_update);
schedule_delayed_work(&device->work, 0);
}
break;
case FW_NODE_DESTROYED:
case FW_NODE_LINK_OFF:
if (!node->data)
break;
/*
* Destroy the device associated with the node. There
* are two cases here: either the device is fully
* initialized (FW_DEVICE_RUNNING) or we're in the
* process of reading its config rom
* (FW_DEVICE_INITIALIZING). If it is fully
* initialized we can reuse device->work to schedule a
* full fw_device_shutdown(). If not, there's work
* scheduled to read it's config rom, and we just put
* the device in shutdown state to have that code fail
* to create the device.
*/
device = node->data;
if (atomic_xchg(&device->state,
FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
schedule_delayed_work(&device->work,
list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);
}
break;
}
}