linux/drivers/mmc/core/sdio_bus.c

352 lines
8.0 KiB
C
Raw Normal View History

/*
* linux/drivers/mmc/core/sdio_bus.c
*
* Copyright 2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* SDIO function driver model
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/acpi.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio_func.h>
#include "sdio_cis.h"
#include "sdio_bus.h"
/* show configuration fields */
#define sdio_config_attr(field, format_string) \
static ssize_t \
field##_show(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct sdio_func *func; \
\
func = dev_to_sdio_func (dev); \
return sprintf (buf, format_string, func->field); \
} \
static DEVICE_ATTR_RO(field)
sdio_config_attr(class, "0x%02x\n");
sdio_config_attr(vendor, "0x%04x\n");
sdio_config_attr(device, "0x%04x\n");
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sdio_func *func = dev_to_sdio_func (dev);
return sprintf(buf, "sdio:c%02Xv%04Xd%04X\n",
func->class, func->vendor, func->device);
}
static DEVICE_ATTR_RO(modalias);
static struct attribute *sdio_dev_attrs[] = {
&dev_attr_class.attr,
&dev_attr_vendor.attr,
&dev_attr_device.attr,
&dev_attr_modalias.attr,
NULL,
};
ATTRIBUTE_GROUPS(sdio_dev);
static const struct sdio_device_id *sdio_match_one(struct sdio_func *func,
const struct sdio_device_id *id)
{
if (id->class != (__u8)SDIO_ANY_ID && id->class != func->class)
return NULL;
if (id->vendor != (__u16)SDIO_ANY_ID && id->vendor != func->vendor)
return NULL;
if (id->device != (__u16)SDIO_ANY_ID && id->device != func->device)
return NULL;
return id;
}
static const struct sdio_device_id *sdio_match_device(struct sdio_func *func,
struct sdio_driver *sdrv)
{
const struct sdio_device_id *ids;
ids = sdrv->id_table;
if (ids) {
while (ids->class || ids->vendor || ids->device) {
if (sdio_match_one(func, ids))
return ids;
ids++;
}
}
return NULL;
}
static int sdio_bus_match(struct device *dev, struct device_driver *drv)
{
struct sdio_func *func = dev_to_sdio_func(dev);
struct sdio_driver *sdrv = to_sdio_driver(drv);
if (sdio_match_device(func, sdrv))
return 1;
return 0;
}
static int
sdio_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct sdio_func *func = dev_to_sdio_func(dev);
if (add_uevent_var(env,
"SDIO_CLASS=%02X", func->class))
return -ENOMEM;
if (add_uevent_var(env,
"SDIO_ID=%04X:%04X", func->vendor, func->device))
return -ENOMEM;
if (add_uevent_var(env,
"MODALIAS=sdio:c%02Xv%04Xd%04X",
func->class, func->vendor, func->device))
return -ENOMEM;
return 0;
}
static int sdio_bus_probe(struct device *dev)
{
struct sdio_driver *drv = to_sdio_driver(dev->driver);
struct sdio_func *func = dev_to_sdio_func(dev);
const struct sdio_device_id *id;
int ret;
id = sdio_match_device(func, drv);
if (!id)
return -ENODEV;
/* Unbound SDIO functions are always suspended.
* During probe, the function is set active and the usage count
* is incremented. If the driver supports runtime PM,
* it should call pm_runtime_put_noidle() in its probe routine and
* pm_runtime_get_noresume() in its remove routine.
*/
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto disable_runtimepm;
}
/* Set the default block size so the driver is sure it's something
* sensible. */
sdio_claim_host(func);
ret = sdio_set_block_size(func, 0);
sdio_release_host(func);
if (ret)
goto disable_runtimepm;
ret = drv->probe(func, id);
if (ret)
goto disable_runtimepm;
return 0;
disable_runtimepm:
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_noidle(dev);
return ret;
}
static int sdio_bus_remove(struct device *dev)
{
struct sdio_driver *drv = to_sdio_driver(dev->driver);
struct sdio_func *func = dev_to_sdio_func(dev);
int ret = 0;
/* Make sure card is powered before invoking ->remove() */
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_get_sync(dev);
drv->remove(func);
if (func->irq_handler) {
pr_warning("WARNING: driver %s did not remove "
"its interrupt handler!\n", drv->name);
sdio_claim_host(func);
sdio_release_irq(func);
sdio_release_host(func);
}
/* First, undo the increment made directly above */
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_noidle(dev);
/* Then undo the runtime PM settings in sdio_bus_probe() */
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_sync(dev);
return ret;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int pm_no_operation(struct device *dev)
{
/*
* Prevent the PM core from calling SDIO device drivers' suspend
* callback routines, which it is not supposed to do, by using this
* empty function as the bus type suspend callaback for SDIO.
*/
return 0;
}
#endif
static const struct dev_pm_ops sdio_bus_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
SET_RUNTIME_PM_OPS(
pm_generic_runtime_suspend,
pm_generic_runtime_resume,
NULL
)
};
#define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops)
#else /* !CONFIG_PM */
#define SDIO_PM_OPS_PTR NULL
#endif /* !CONFIG_PM */
static struct bus_type sdio_bus_type = {
.name = "sdio",
.dev_groups = sdio_dev_groups,
.match = sdio_bus_match,
.uevent = sdio_bus_uevent,
.probe = sdio_bus_probe,
.remove = sdio_bus_remove,
.pm = SDIO_PM_OPS_PTR,
};
int sdio_register_bus(void)
{
return bus_register(&sdio_bus_type);
}
void sdio_unregister_bus(void)
{
bus_unregister(&sdio_bus_type);
}
/**
* sdio_register_driver - register a function driver
* @drv: SDIO function driver
*/
int sdio_register_driver(struct sdio_driver *drv)
{
drv->drv.name = drv->name;
drv->drv.bus = &sdio_bus_type;
return driver_register(&drv->drv);
}
EXPORT_SYMBOL_GPL(sdio_register_driver);
/**
* sdio_unregister_driver - unregister a function driver
* @drv: SDIO function driver
*/
void sdio_unregister_driver(struct sdio_driver *drv)
{
drv->drv.bus = &sdio_bus_type;
driver_unregister(&drv->drv);
}
EXPORT_SYMBOL_GPL(sdio_unregister_driver);
static void sdio_release_func(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
sdio_free_func_cis(func);
kfree(func->info);
kfree(func);
}
/*
* Allocate and initialise a new SDIO function structure.
*/
struct sdio_func *sdio_alloc_func(struct mmc_card *card)
{
struct sdio_func *func;
func = kzalloc(sizeof(struct sdio_func), GFP_KERNEL);
if (!func)
return ERR_PTR(-ENOMEM);
func->card = card;
device_initialize(&func->dev);
func->dev.parent = &card->dev;
func->dev.bus = &sdio_bus_type;
func->dev.release = sdio_release_func;
return func;
}
#ifdef CONFIG_ACPI
static void sdio_acpi_set_handle(struct sdio_func *func)
{
struct mmc_host *host = func->card->host;
u64 addr = (host->slotno << 16) | func->num;
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-11-12 05:41:56 +08:00
acpi_preset_companion(&func->dev, ACPI_HANDLE(host->parent), addr);
}
#else
static inline void sdio_acpi_set_handle(struct sdio_func *func) {}
#endif
/*
* Register a new SDIO function with the driver model.
*/
int sdio_add_func(struct sdio_func *func)
{
int ret;
dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
sdio_acpi_set_handle(func);
ret = device_add(&func->dev);
if (ret == 0) {
sdio_func_set_present(func);
acpi_dev_pm_attach(&func->dev, false);
}
return ret;
}
/*
* Unregister a SDIO function with the driver model, and
* (eventually) free it.
* This function can be called through error paths where sdio_add_func() was
* never executed (because a failure occurred at an earlier point).
*/
void sdio_remove_func(struct sdio_func *func)
{
if (!sdio_func_present(func))
return;
acpi_dev_pm_detach(&func->dev, false);
device_del(&func->dev);
put_device(&func->dev);
}