linux/arch/ia64/sn/pci/pci_dma.c

487 lines
13 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000,2002-2005 Silicon Graphics, Inc. All rights reserved.
*
* Routines for PCI DMA mapping. See Documentation/DMA-API.txt for
* a description of how these routines should be used.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <asm/sn/intr.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/sn_sal.h>
#define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg)))
#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
/**
* sn_dma_supported - test a DMA mask
* @dev: device to test
* @mask: DMA mask to test
*
* Return whether the given PCI device DMA address mask can be supported
* properly. For example, if your device can only drive the low 24-bits
* during PCI bus mastering, then you would pass 0x00ffffff as the mask to
* this function. Of course, SN only supports devices that have 32 or more
* address bits when using the PMU.
*/
static int sn_dma_supported(struct device *dev, u64 mask)
{
BUG_ON(dev->bus != &pci_bus_type);
if (mask < 0x7fffffff)
return 0;
return 1;
}
/**
* sn_dma_set_mask - set the DMA mask
* @dev: device to set
* @dma_mask: new mask
*
* Set @dev's DMA mask if the hw supports it.
*/
int sn_dma_set_mask(struct device *dev, u64 dma_mask)
{
BUG_ON(dev->bus != &pci_bus_type);
if (!sn_dma_supported(dev, dma_mask))
return 0;
*dev->dma_mask = dma_mask;
return 1;
}
EXPORT_SYMBOL(sn_dma_set_mask);
/**
* sn_dma_alloc_coherent - allocate memory for coherent DMA
* @dev: device to allocate for
* @size: size of the region
* @dma_handle: DMA (bus) address
* @flags: memory allocation flags
*
* dma_alloc_coherent() returns a pointer to a memory region suitable for
* coherent DMA traffic to/from a PCI device. On SN platforms, this means
* that @dma_handle will have the %PCIIO_DMA_CMD flag set.
*
* This interface is usually used for "command" streams (e.g. the command
* queue for a SCSI controller). See Documentation/DMA-API.txt for
* more information.
*/
static void *sn_dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t * dma_handle, gfp_t flags)
{
void *cpuaddr;
unsigned long phys_addr;
int node;
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
BUG_ON(dev->bus != &pci_bus_type);
/*
* Allocate the memory.
*/
node = pcibus_to_node(pdev->bus);
if (likely(node >=0)) {
struct page *p = alloc_pages_exact_node(node,
flags, get_order(size));
if (likely(p))
cpuaddr = page_address(p);
else
return NULL;
} else
cpuaddr = (void *)__get_free_pages(flags, get_order(size));
if (unlikely(!cpuaddr))
return NULL;
memset(cpuaddr, 0x0, size);
/* physical addr. of the memory we just got */
phys_addr = __pa(cpuaddr);
/*
* 64 bit address translations should never fail.
* 32 bit translations can fail if there are insufficient mapping
* resources.
*/
*dma_handle = provider->dma_map_consistent(pdev, phys_addr, size,
SN_DMA_ADDR_PHYS);
if (!*dma_handle) {
printk(KERN_ERR "%s: out of ATEs\n", __func__);
free_pages((unsigned long)cpuaddr, get_order(size));
return NULL;
}
return cpuaddr;
}
/**
* sn_pci_free_coherent - free memory associated with coherent DMAable region
* @dev: device to free for
* @size: size to free
* @cpu_addr: kernel virtual address to free
* @dma_handle: DMA address associated with this region
*
* Frees the memory allocated by dma_alloc_coherent(), potentially unmapping
* any associated IOMMU mappings.
*/
static void sn_dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
BUG_ON(dev->bus != &pci_bus_type);
provider->dma_unmap(pdev, dma_handle, 0);
free_pages((unsigned long)cpu_addr, get_order(size));
}
/**
* sn_dma_map_single_attrs - map a single page for DMA
* @dev: device to map for
* @cpu_addr: kernel virtual address of the region to map
* @size: size of the region
* @direction: DMA direction
* @attrs: optional dma attributes
*
* Map the region pointed to by @cpu_addr for DMA and return the
* DMA address.
*
* We map this to the one step pcibr_dmamap_trans interface rather than
* the two step pcibr_dmamap_alloc/pcibr_dmamap_addr because we have
* no way of saving the dmamap handle from the alloc to later free
* (which is pretty much unacceptable).
*
* mappings with the DMA_ATTR_WRITE_BARRIER get mapped with
* dma_map_consistent() so that writes force a flush of pending DMA.
* (See "SGI Altix Architecture Considerations for Linux Device Drivers",
* Document Number: 007-4763-001)
*
* TODO: simplify our interface;
* figure out how to save dmamap handle so can use two step.
*/
static dma_addr_t sn_dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir,
struct dma_attrs *attrs)
{
void *cpu_addr = page_address(page) + offset;
dma_addr_t dma_addr;
unsigned long phys_addr;
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
int dmabarr;
dmabarr = dma_get_attr(DMA_ATTR_WRITE_BARRIER, attrs);
BUG_ON(dev->bus != &pci_bus_type);
phys_addr = __pa(cpu_addr);
if (dmabarr)
dma_addr = provider->dma_map_consistent(pdev, phys_addr,
size, SN_DMA_ADDR_PHYS);
else
dma_addr = provider->dma_map(pdev, phys_addr, size,
SN_DMA_ADDR_PHYS);
if (!dma_addr) {
printk(KERN_ERR "%s: out of ATEs\n", __func__);
return 0;
}
return dma_addr;
}
/**
* sn_dma_unmap_single_attrs - unamp a DMA mapped page
* @dev: device to sync
* @dma_addr: DMA address to sync
* @size: size of region
* @direction: DMA direction
* @attrs: optional dma attributes
*
* This routine is supposed to sync the DMA region specified
* by @dma_handle into the coherence domain. On SN, we're always cache
* coherent, so we just need to free any ATEs associated with this mapping.
*/
static void sn_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
size_t size, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
BUG_ON(dev->bus != &pci_bus_type);
provider->dma_unmap(pdev, dma_addr, dir);
}
/**
* sn_dma_unmap_sg - unmap a DMA scatterlist
* @dev: device to unmap
* @sg: scatterlist to unmap
* @nhwentries: number of scatterlist entries
* @direction: DMA direction
* @attrs: optional dma attributes
*
* Unmap a set of streaming mode DMA translations.
*/
static void sn_dma_unmap_sg(struct device *dev, struct scatterlist *sgl,
int nhwentries, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
int i;
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
struct scatterlist *sg;
BUG_ON(dev->bus != &pci_bus_type);
for_each_sg(sgl, sg, nhwentries, i) {
provider->dma_unmap(pdev, sg->dma_address, dir);
sg->dma_address = (dma_addr_t) NULL;
sg->dma_length = 0;
}
}
/**
* sn_dma_map_sg - map a scatterlist for DMA
* @dev: device to map for
* @sg: scatterlist to map
* @nhwentries: number of entries
* @direction: direction of the DMA transaction
* @attrs: optional dma attributes
*
* mappings with the DMA_ATTR_WRITE_BARRIER get mapped with
* dma_map_consistent() so that writes force a flush of pending DMA.
* (See "SGI Altix Architecture Considerations for Linux Device Drivers",
* Document Number: 007-4763-001)
*
* Maps each entry of @sg for DMA.
*/
static int sn_dma_map_sg(struct device *dev, struct scatterlist *sgl,
int nhwentries, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
unsigned long phys_addr;
struct scatterlist *saved_sg = sgl, *sg;
struct pci_dev *pdev = to_pci_dev(dev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
int i;
int dmabarr;
dmabarr = dma_get_attr(DMA_ATTR_WRITE_BARRIER, attrs);
BUG_ON(dev->bus != &pci_bus_type);
/*
* Setup a DMA address for each entry in the scatterlist.
*/
for_each_sg(sgl, sg, nhwentries, i) {
dma_addr_t dma_addr;
phys_addr = SG_ENT_PHYS_ADDRESS(sg);
if (dmabarr)
dma_addr = provider->dma_map_consistent(pdev,
phys_addr,
sg->length,
SN_DMA_ADDR_PHYS);
else
dma_addr = provider->dma_map(pdev, phys_addr,
sg->length,
SN_DMA_ADDR_PHYS);
sg->dma_address = dma_addr;
if (!sg->dma_address) {
printk(KERN_ERR "%s: out of ATEs\n", __func__);
/*
* Free any successfully allocated entries.
*/
if (i > 0)
sn_dma_unmap_sg(dev, saved_sg, i, dir, attrs);
return 0;
}
sg->dma_length = sg->length;
}
return nhwentries;
}
static void sn_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir)
{
BUG_ON(dev->bus != &pci_bus_type);
}
static void sn_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size,
enum dma_data_direction dir)
{
BUG_ON(dev->bus != &pci_bus_type);
}
static void sn_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int nelems, enum dma_data_direction dir)
{
BUG_ON(dev->bus != &pci_bus_type);
}
static void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
int nelems, enum dma_data_direction dir)
{
BUG_ON(dev->bus != &pci_bus_type);
}
static int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return 0;
}
u64 sn_dma_get_required_mask(struct device *dev)
{
return DMA_BIT_MASK(64);
}
EXPORT_SYMBOL_GPL(sn_dma_get_required_mask);
char *sn_pci_get_legacy_mem(struct pci_bus *bus)
{
if (!SN_PCIBUS_BUSSOFT(bus))
return ERR_PTR(-ENODEV);
return (char *)(SN_PCIBUS_BUSSOFT(bus)->bs_legacy_mem | __IA64_UNCACHED_OFFSET);
}
int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
{
unsigned long addr;
int ret;
struct ia64_sal_retval isrv;
/*
* First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
* around hw issues at the pci bus level. SGI proms older than
* 4.10 don't implement this.
*/
SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
pci_domain_nr(bus), bus->number,
0, /* io */
0, /* read */
port, size, __pa(val));
if (isrv.status == 0)
return size;
/*
* If the above failed, retry using the SAL_PROBE call which should
* be present in all proms (but which cannot work round PCI chipset
* bugs). This code is retained for compatibility with old
* pre-4.10 proms, and should be removed at some point in the future.
*/
if (!SN_PCIBUS_BUSSOFT(bus))
return -ENODEV;
addr = SN_PCIBUS_BUSSOFT(bus)->bs_legacy_io | __IA64_UNCACHED_OFFSET;
addr += port;
ret = ia64_sn_probe_mem(addr, (long)size, (void *)val);
if (ret == 2)
return -EINVAL;
if (ret == 1)
*val = -1;
return size;
}
int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
{
int ret = size;
unsigned long paddr;
unsigned long *addr;
struct ia64_sal_retval isrv;
/*
* First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
* around hw issues at the pci bus level. SGI proms older than
* 4.10 don't implement this.
*/
SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
pci_domain_nr(bus), bus->number,
0, /* io */
1, /* write */
port, size, __pa(&val));
if (isrv.status == 0)
return size;
/*
* If the above failed, retry using the SAL_PROBE call which should
* be present in all proms (but which cannot work round PCI chipset
* bugs). This code is retained for compatibility with old
* pre-4.10 proms, and should be removed at some point in the future.
*/
if (!SN_PCIBUS_BUSSOFT(bus)) {
ret = -ENODEV;
goto out;
}
/* Put the phys addr in uncached space */
paddr = SN_PCIBUS_BUSSOFT(bus)->bs_legacy_io | __IA64_UNCACHED_OFFSET;
paddr += port;
addr = (unsigned long *)paddr;
switch (size) {
case 1:
*(volatile u8 *)(addr) = (u8)(val);
break;
case 2:
*(volatile u16 *)(addr) = (u16)(val);
break;
case 4:
*(volatile u32 *)(addr) = (u32)(val);
break;
default:
ret = -EINVAL;
break;
}
out:
return ret;
}
static struct dma_map_ops sn_dma_ops = {
.alloc_coherent = sn_dma_alloc_coherent,
.free_coherent = sn_dma_free_coherent,
.map_page = sn_dma_map_page,
.unmap_page = sn_dma_unmap_page,
.map_sg = sn_dma_map_sg,
.unmap_sg = sn_dma_unmap_sg,
.sync_single_for_cpu = sn_dma_sync_single_for_cpu,
.sync_sg_for_cpu = sn_dma_sync_sg_for_cpu,
.sync_single_for_device = sn_dma_sync_single_for_device,
.sync_sg_for_device = sn_dma_sync_sg_for_device,
.mapping_error = sn_dma_mapping_error,
.dma_supported = sn_dma_supported,
};
void sn_dma_init(void)
{
dma_ops = &sn_dma_ops;
}