openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/gpu/drm/vc4/Kconfig

22 lines
636 B
Plaintext
Raw Normal View History

drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-03 05:01:12 +08:00
config DRM_VC4
tristate "Broadcom VC4 Graphics"
drm/vc4: Enable selection in Kconfig on any 32-bit BCM platform. With the Cygnus port, we needed to add at least "|| ARCH_BCM_CYGNUS" to let the module get built on a cygnus-only kernel. However, I anticipate having a port for Kona soon, so just present the module on all of BCM. v2: Keep allowing selection with ARCH_BCM2835, since ARCH_BCM doesn't exist on arm64. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Acked-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170509181539.30278-1-eric@anholt.net
2017-05-10 02:15:39 +08:00
depends on ARCH_BCM || ARCH_BCM2835 || COMPILE_TEST
dma-mapping: always provide the dma_map_ops based implementation Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 07:02:05 +08:00
depends on DRM
drm/vc4: Add HDMI audio support The HDMI encoder IP embeds all needed blocks to output audio, with a custom DAI called MAI moving audio between the two parts of the HDMI core. This driver now exposes a sound card to let users stream audio to their display. Using the hdmi-codec driver has been considered here, but MAI meant having to significantly rework hdmi-codec, and it would have left little shared code with the I2S mode anyway. The encoder requires that the audio be SPDIF-formatted frames only, which alsalib will format-convert for us. This patch is the combined work of Eric Anholt (initial register setup with a separate dmaengine driver and using simple-audio-card) and Boris Brezillon (moving it all into HDMI, massive debug to get it actually working), and which Eric has the permission to release. v2: Drop "-audio" from sound card name, since that's already implied (suggestion by Boris) Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-2-eric@anholt.net
2017-02-28 04:28:02 +08:00
depends on SND && SND_SOC
drm/vc4: Add DSI driver The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. Some registers move around, and the featureset is slightly different, as DSI1 (the 4-lane DSI) is a later version of the hardware block. This driver doesn't yet enable DSI0, since we don't have any hardware to test against, but it does put a lot of the register definitions and code in place. v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by Stephen Boyd) Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net
2017-02-01 03:29:11 +08:00
depends on COMMON_CLK
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-03 05:01:12 +08:00
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER Avoid the following build errors, seen with m68k:allmodconfig and other architectures which do not support HAVE_DMA_ATTRS. ERROR: "drm_gem_cma_create" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_get_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_vm_ops" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_mmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_vunmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_import_sg_table" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_prime_vmap" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_dumb_map_offset" [drivers/gpu/drm/vc4/vc4.ko] undefined! ERROR: "drm_gem_cma_create" [drivers/gpu/drm/drm_kms_helper.ko] undefined! ERROR: "drm_gem_cma_describe" [drivers/gpu/drm/drm_kms_helper.ko] undefined! ERROR: "drm_gem_cma_free_object" [drivers/gpu/drm/drm_kms_helper.ko] undefined! Acked-by: Eric Anholt <eric@anholt.net> Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-02 08:31:52 +08:00
select DRM_GEM_CMA_HELPER
drm/vc4: Add DPI driver The DPI interface involves taking a ton of our GPIOs to be used as outputs, and routing display signals over them in parallel. v2: Use display_info.bus_formats[] to replace our custom DT properties. v3: Rebase on V3D documentation changes. v4: Fix rebase detritus from V3D documentation changes. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org>
2016-02-11 03:42:32 +08:00
select DRM_PANEL
drm/vc4: Add HDMI audio support The HDMI encoder IP embeds all needed blocks to output audio, with a custom DAI called MAI moving audio between the two parts of the HDMI core. This driver now exposes a sound card to let users stream audio to their display. Using the hdmi-codec driver has been considered here, but MAI meant having to significantly rework hdmi-codec, and it would have left little shared code with the I2S mode anyway. The encoder requires that the audio be SPDIF-formatted frames only, which alsalib will format-convert for us. This patch is the combined work of Eric Anholt (initial register setup with a separate dmaengine driver and using simple-audio-card) and Boris Brezillon (moving it all into HDMI, massive debug to get it actually working), and which Eric has the permission to release. v2: Drop "-audio" from sound card name, since that's already implied (suggestion by Boris) Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-2-eric@anholt.net
2017-02-28 04:28:02 +08:00
select SND_PCM
select SND_PCM_ELD
select SND_SOC_GENERIC_DMAENGINE_PCM
drm/vc4: Add DSI driver The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. Some registers move around, and the featureset is slightly different, as DSI1 (the 4-lane DSI) is a later version of the hardware block. This driver doesn't yet enable DSI0, since we don't have any hardware to test against, but it does put a lot of the register definitions and code in place. v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by Stephen Boyd) Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net
2017-02-01 03:29:11 +08:00
select DRM_MIPI_DSI
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-03 05:01:12 +08:00
help
Choose this option if you have a system that has a Broadcom
VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835.
This driver requires that "avoid_warnings=2" be present in
the config.txt for the firmware, to keep it from smashing
our display setup.