openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/sound/soc/davinci/Kconfig

76 lines
2.0 KiB
Plaintext
Raw Normal View History

[ALSA] Davinci ASoC support Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-18 18:40:22 +08:00
config SND_DAVINCI_SOC
tristate "SoC Audio for the TI DAVINCI chip"
sound: Convert to menuconfig Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-23 22:10:37 +08:00
depends on ARCH_DAVINCI
[ALSA] Davinci ASoC support Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-18 18:40:22 +08:00
help
Say Y or M if you want to add support for codecs attached to
the DAVINCI AC97 or I2S interface. You will also need
to select the audio interfaces to support below.
config SND_DAVINCI_SOC_I2S
tristate
ASoC: Add mcasp support for DM646x Adds driver support for the two instances of McASP on TI's DM646x. The multichannel audio serial port (McASP) functions as a general-purpose audio serial port optimized for the needs of multichannel audio application. (http://www.ti.com/litv/pdf/spruer1b). There are two instances of McASP on DM646x. The McASP0 module includes up to 4 serializers that can be individually enabled to either transmit or receive in different modes. The McASP1 module is limited with only 1 pinned-out serializer that can be enabled to only transmit in DIT mode (neither receiving in any mode nor transmitting in either Burst or TDM mode is supported). McASP0 consists of transmit and receive sections that may operate synchronized, or completely independently with separate master clocks, bit clocks, and frame syncs, and using different transmit modes with different bit-stream formats. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-05 18:28:40 +08:00
config SND_DAVINCI_SOC_MCASP
tristate
ASoC: DaVinci: Voice Codec Interface This patch adds the support for the interface needed by the DaVinci Voice Codec CQ93VC. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 23:32:42 +08:00
config SND_DAVINCI_SOC_VCIF
tristate
[ALSA] Davinci ASoC support Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-18 18:40:22 +08:00
config SND_DAVINCI_SOC_EVM
ASoC: Davinci: Add audio codec support for DM365 EVM This patch enables tlv320aic3101 support on DM365 EVM and it was tested on DM365 EVM rev c. Note: this patch was created based on temp/asoc branch. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-03 05:33:59 +08:00
tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
ASoC: DaVinci EVM board support buildfixes This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15 04:01:59 +08:00
depends on SND_DAVINCI_SOC
DaVinci: DM365: Voice Codec support for the DM365 EVM The DM365 EVM has two codecs: the Audio Codec (AIC3x) and the Voice Codec, the idea is to have both enabled in the same kernel simultaneously. However, the current soc-core doesn't support simultaneous codecs, once that support will have added, a patch will be posted to enable both codecs in the DM365 EVM. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 23:33:40 +08:00
depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM
[ALSA] Davinci ASoC support Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-18 18:40:22 +08:00
select SND_DAVINCI_SOC_I2S
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on TI
DaVinci: DM365: Voice Codec support for the DM365 EVM The DM365 EVM has two codecs: the Audio Codec (AIC3x) and the Voice Codec, the idea is to have both enabled in the same kernel simultaneously. However, the current soc-core doesn't support simultaneous codecs, once that support will have added, a patch will be posted to enable both codecs in the DM365 EVM. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 23:33:40 +08:00
DaVinci DM6446, DM355 or DM365 EVM platforms.
choice
prompt "DM365 codec select"
depends on SND_DAVINCI_SOC_EVM
depends on MACH_DAVINCI_DM365_EVM
config SND_DM365_AIC3X_CODEC
bool "Audio Codec - AIC3101"
help
Say Y if you want to add support for AIC3101 audio codec
config SND_DM365_VOICE_CODEC
bool "Voice Codec - CQ93VC"
select MFD_DAVINCI_VOICECODEC
select SND_DAVINCI_SOC_VCIF
select SND_SOC_CQ0093VC
help
Say Y if you want to add support for SoC On-chip voice codec
endchoice
ASoC: Add driver for the Lyrtech SFFSDR board The PCM3008 is used on the Lyrtech SFFSDR board, in conjunction with an FPGA that generates the bit clock and the master clock [Downgraded the rate debug print to pr_debug() in hw_params, converted asm/gpio.h to linux/gpio.h -- broonie] Signed-off-by: Hugo Villeneuve <hugo@hugovil.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-19 14:37:32 +08:00
ASoC: Add mcasp support for DM646x Adds driver support for the two instances of McASP on TI's DM646x. The multichannel audio serial port (McASP) functions as a general-purpose audio serial port optimized for the needs of multichannel audio application. (http://www.ti.com/litv/pdf/spruer1b). There are two instances of McASP on DM646x. The McASP0 module includes up to 4 serializers that can be individually enabled to either transmit or receive in different modes. The McASP1 module is limited with only 1 pinned-out serializer that can be enabled to only transmit in DIT mode (neither receiving in any mode nor transmitting in either Burst or TDM mode is supported). McASP0 consists of transmit and receive sections that may operate synchronized, or completely independently with separate master clocks, bit clocks, and frame syncs, and using different transmit modes with different bit-stream formats. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-05 18:28:40 +08:00
config SND_DM6467_SOC_EVM
tristate "SoC Audio support for DaVinci DM6467 EVM"
depends on SND_DAVINCI_SOC && MACH_DAVINCI_DM6467_EVM
select SND_DAVINCI_SOC_MCASP
select SND_SOC_TLV320AIC3X
select SND_SOC_SPDIF
help
Say Y if you want to add support for SoC audio on TI
ASoC: DaVinci: Support Audio on DA830 EVM Add support for audio on DA830 EVM- here McASP1 is interfaced to TLV320AIC3106 codec. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 22:07:51 +08:00
config SND_DA830_SOC_EVM
ASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVM There is one instance of McASP on DA850/OMAP-L138 SoC. This is connected to TLV320AIC3106 codec for audio playback and capture. This patch adds audio support on this platform. Some of the structure prefix names which are common for DA830/OMAP-L137 EVM and DA850/OMAP-L138 EVM have been renamed to da8xx from da830. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-12 04:59:21 +08:00
tristate "SoC Audio support for DA830/OMAP-L137 EVM"
ASoC: DaVinci: Support Audio on DA830 EVM Add support for audio on DA830 EVM- here McASP1 is interfaced to TLV320AIC3106 codec. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 22:07:51 +08:00
depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA830_EVM
select SND_DAVINCI_SOC_MCASP
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on TI
ASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVM There is one instance of McASP on DA850/OMAP-L138 SoC. This is connected to TLV320AIC3106 codec for audio playback and capture. This patch adds audio support on this platform. Some of the structure prefix names which are common for DA830/OMAP-L137 EVM and DA850/OMAP-L138 EVM have been renamed to da8xx from da830. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-12 04:59:21 +08:00
DA830/OMAP-L137 EVM
config SND_DA850_SOC_EVM
tristate "SoC Audio support for DA850/OMAP-L138 EVM"
depends on SND_DAVINCI_SOC && MACH_DAVINCI_DA850_EVM
select SND_DAVINCI_SOC_MCASP
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on TI
DA850/OMAP-L138 EVM
ASoC: DaVinci: Support Audio on DA830 EVM Add support for audio on DA830 EVM- here McASP1 is interfaced to TLV320AIC3106 codec. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 22:07:51 +08:00